Commit Graph

55 Commits

Author SHA1 Message Date
Joakim Koskela abf5cdb89d ipsec: Interfamily IPSec BEET, ipv4-inner ipv6-outer
Here's a revised version, based on Herbert's comments, of a fix for
the ipv4-inner, ipv6-outer interfamily ipsec beet mode. It fixes the
network header adjustment during interfamily, as well as makes sure
that we reserve enough room for the new ipv6 header if we might have
something else as the inner family. Also, the ipv4 pseudo header
construction was added.

Signed-off-by: Joakim Koskela <jookos@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-06 02:40:25 -07:00
Thomas Graf 920fc941a9 [ESP]: Ensure IV is in linear part of the skb to avoid BUG() due to OOB access
ESP does not account for the IV size when calling pskb_may_pull() to
ensure everything it accesses directly is within the linear part of a
potential fragment. This results in a BUG() being triggered when the
both the IPv4 and IPv6 ESP stack is fed with an skb where the first
fragment ends between the end of the esp header and the end of the IV.

This bug was found by Dirk Nehring <dnehring@gmx.net> .

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-27 16:08:03 -07:00
Herbert Xu b318e0e4ef [IPSEC]: Fix bogus usage of u64 on input sequence number
Al Viro spotted a bogus use of u64 on the input sequence number which
is big-endian.  This patch fixes it by giving the input sequence number
its own member in the xfrm_skb_cb structure.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-12 22:50:35 -08:00
Eric Dumazet 533cb5b0a6 [XFRM]: constify 'struct xfrm_type'
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:20 -08:00
Herbert Xu 1a6509d991 [IPSEC]: Add support for combined mode algorithms
This patch adds support for combined mode algorithms with GCM being
the first algorithm supported.

Combined mode algorithms can be added through the xfrm_user interface
using the new algorithm payload type XFRMA_ALG_AEAD.  Each algorithms
is identified by its name and the ICV length.

For the purposes of matching algorithms in xfrm_tmpl structures,
combined mode algorithms occupy the same name space as encryption
algorithms.  This is in line with how they are negotiated using IKE.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:03 -08:00
Herbert Xu 38320c70d2 [IPSEC]: Use crypto_aead and authenc in ESP
This patch converts ESP to use the crypto_aead interface and in particular
the authenc algorithm.  This lays the foundations for future support of
combined mode algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:02 -08:00
Herbert Xu 9dd3245a2a [IPSEC]: Move all calls to xfrm_audit_state_icvfail to xfrm_input
Let's nip the code duplication in the bud :)

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:10 -08:00
Paul Moore afeb14b490 [XFRM]: RFC4303 compliant auditing
This patch adds a number of new IPsec audit events to meet the auditing
requirements of RFC4303.  This includes audit hooks for the following events:

 * Could not find a valid SA [sections 2.1, 3.4.2]
   . xfrm_audit_state_notfound()
   . xfrm_audit_state_notfound_simple()

 * Sequence number overflow [section 3.3.3]
   . xfrm_audit_state_replay_overflow()

 * Replayed packet [section 3.4.3]
   . xfrm_audit_state_replay()

 * Integrity check failure [sections 3.4.4.1, 3.4.4.2]
   . xfrm_audit_state_icvfail()

While RFC4304 deals only with ESP most of the changes in this patch apply to
IPsec in general, i.e. both AH and ESP.  The one case, integrity check
failure, where ESP specific code had to be modified the same was done to the
AH code for the sake of consistency.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:01 -08:00
Herbert Xu 0ebea8ef35 [IPSEC]: Move state lock into x->type->input
This patch releases the lock on the state before calling
x->type->input.  It also adds the lock to the spots where they're
currently needed.

Most of those places (all except mip6) are expected to disappear with
async crypto.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:52 -08:00
Herbert Xu 668dc8af31 [IPSEC]: Move integrity stat collection into xfrm_input
Similar to the moving out of the replay processing on the output, this
patch moves the integrity stat collectin from x->type->input into
xfrm_input.

This would eventually allow transforms such as AH/ESP to be lockless.

The error value EBADMSG (currently unused in the crypto layer) is used
to indicate a failed integrity check.  In future this error can be
directly returned by the crypto layer once we switch to aead
algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:51 -08:00
Thomas Graf 95a02cfd4d [IPv6] ESP: Discard dummy packets introduced in rfc4303
RFC4303 introduces dummy packets with a nexthdr value of 59
to implement traffic confidentiality. Such packets need to
be dropped silently and the payload may not be attempted to
be parsed as it consists of random chunk.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 02:45:27 -08:00
David S. Miller 51c739d1f4 [NET]: Fix incorrect sg_mark_end() calls.
This fixes scatterlist corruptions added by

	commit 68e3f5dd4d
	[CRYPTO] users: Fix up scatterlist conversion errors

The issue is that the code calls sg_mark_end() which clobbers the
sg_page() pointer of the final scatterlist entry.

The first part fo the fix makes skb_to_sgvec() do __sg_mark_end().

After considering all skb_to_sgvec() call sites the most correct
solution is to call __sg_mark_end() in skb_to_sgvec() since that is
what all of the callers would end up doing anyways.

I suspect this might have fixed some problems in virtio_net which is
the sole non-crypto user of skb_to_sgvec().

Other similar sg_mark_end() cases were converted over to
__sg_mark_end() as well.

Arguably sg_mark_end() is a poorly named function because it doesn't
just "mark", it clears out the page pointer as a side effect, which is
what led to these bugs in the first place.

The one remaining plain sg_mark_end() call is in scsi_alloc_sgtable()
and arguably it could be converted to __sg_mark_end() if only so that
we can delete this confusing interface from linux/scatterlist.h

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 21:29:29 -07:00
Herbert Xu 68e3f5dd4d [CRYPTO] users: Fix up scatterlist conversion errors
This patch fixes the errors made in the users of the crypto layer during
the sg_init_table conversion.  It also adds a few conversions that were
missing altogether.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 00:52:07 -07:00
Adrian Bunk 72998d8c84 [INET] ESP: Must #include <linux/scatterlist.h>
This patch fixes the following compile errors in some configurations:

<--  snip  -->

...
  CC      net/ipv4/esp4.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv4/esp4.c: In function 'esp_output':
/home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv4/esp4.c:113: error: implicit declaration of function 'sg_init_table'
make[3]: *** [net/ipv4/esp4.o] Error 1
...
/home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv6/esp6.c: In function 'esp6_output':
/home/bunk/linux/kernel-2.6/git/linux-2.6/net/ipv6/esp6.c:112: error: implicit declaration of function 'sg_init_table'
make[3]: *** [net/ipv6/esp6.o] Error 1


<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-26 22:53:58 -07:00
David S. Miller ed0e7e0ca3 [IPSEC]: Add missing sg_init_table() calls to ESP.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-26 00:38:39 -07:00
Masahide NAKAMURA ea2c47b42f [IPSEC] IPV6: Fix to add tunnel mode SA correctly.
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22 02:59:58 -07:00
Herbert Xu ca68145f16 [IPSEC]: Disallow combinations of RO and AH/ESP/IPCOMP
Combining RO and AH/ESP/IPCOMP does not make sense.  So this patch adds a
check in the state initialisation function to prevent this.

This allows us to safely remove the mode input function of RO since it
can never be called anymore.  Indeed, if somehow it does get called we'll
know about it through an OOPS instead of it slipping past silently.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17 21:35:15 -07:00
Herbert Xu ceb1eec829 [IPSEC]: Move IP length/checksum setting out of transforms
This patch moves the setting of the IP length and checksum fields out of
the transforms and into the xfrmX_output functions.  This would help future
efforts in merging the transforms themselves.

It also adds an optimisation to ipcomp due to the fact that the transport
offset is guaranteed to be zero.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:56 -07:00
Herbert Xu 87bdc48d30 [IPSEC]: Get rid of ipv6_{auth,esp,comp}_hdr
This patch removes the duplicate ipv6_{auth,esp,comp}_hdr structures since
they're identical to the IPv4 versions.  Duplicating them would only create
problems for ourselves later when we need to add things like extended
sequence numbers.

I've also added transport header type conversion headers for these types
which are now used by the transforms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:55 -07:00
Herbert Xu 7b277b1a5f [IPSEC]: Set skb->data to payload in x->mode->output
This patch changes the calling convention so that on entry from
x->mode->output and before entry into x->type->output skb->data
will point to the payload instead of the IP header.

This is essentially a redistribution of skb_push/skb_pull calls
with the aim of minimising them on the common path of tunnel +
ESP.

It'll also let us use the same calling convention between IPv4
and IPv6 with the next patch.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:54 -07:00
Herbert Xu b7c6538cd8 [IPSEC]: Move state lock into x->type->output
This patch releases the lock on the state before calling x->type->output.
It also adds the lock to the spots where they're currently needed.

Most of those places (all except mip6) are expected to disappear with
async crypto.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:03 -07:00
Herbert Xu 007f0211a8 [IPSEC]: Store IPv6 nh pointer in mac_header on output
Current the x->mode->output functions store the IPv6 nh pointer in the
skb network header.  This is inconvenient because the network header then
has to be fixed up before the packet can leave the IPsec stack.  The mac
header field is unused on output so we can use that to store this instead.

This patch does that and removes the network header fix-up in xfrm_output.

It also uses ipv6_hdr where appropriate in the x->type->output functions.

There is also a minor clean-up in esp4 to make it use the same code as
esp6 to help any subsequent effort to merge the two.

Lastly it kills two redundant skb_set_* statements in BEET that were
simply copied over from transport mode.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:00 -07:00
Herbert Xu 436a0a4022 [IPSEC]: Move output replay code into xfrm_output
The replay counter is one of only two remaining things in the output code
that requires a lock on the xfrm state (the other being the crypto).  This
patch moves it into the generic xfrm_output so we can remove the lock from
the transforms themselves.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:54 -07:00
Herbert Xu 4b7137ff8f [IPSEC] esp: Remove keys from esp_data structure
The keys are only used during initialisation so we don't need to carry them
in esp_data.  Since we don't have to allocate them again, there is no need
to place a limit on the authentication key length anymore.

This patch also kills the unused auth.icv member.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:52 -07:00
Masahide NAKAMURA d3d6dd3ada [XFRM]: Add module alias for transformation type.
It is clean-up for XFRM type modules and adds aliases with its
protocol:
 ESP, AH, IPCOMP, IPIP and IPv6 for IPsec
 ROUTING and DSTOPTS for MIPv6

It is almost the same thing as XFRM mode alias, but it is added
new defines XFRM_PROTO_XXX for preprocessing since some protocols
are defined as enum.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Acked-by: Ingo Oeser <netdev@axxeo.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:15:43 -07:00
Patrick McHardy c5c2523893 [XFRM]: Optimize MTU calculation
Replace the probing based MTU estimation, which usually takes 2-3 iterations
to find a fitting value and may underestimate the MTU, by an exact calculation.

Also fix underestimation of the XFRM trailer_len, which causes unnecessary
reallocations.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:28:38 -07:00
Patrick McHardy 557922584d [XFRM]: esp: fix skb_tail_pointer conversion bug
Fix incorrect switch of "trailer" skb by "skb" during skb_tail_pointer
conversion:

-       *(u8*)(trailer->tail - 1) = top_iph->protocol;
+       *(skb_tail_pointer(skb) - 1) = top_iph->protocol;

-       *(u8 *)(trailer->tail - 1) = *skb_network_header(skb);
+       *(skb_tail_pointer(skb) - 1) = *skb_network_header(skb);

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:28:37 -07:00
Arnaldo Carvalho de Melo 27a884dc3c [SK_BUFF]: Convert skb->tail to sk_buff_data_t
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes
on 64bit architectures, allowing us to combine the 4 bytes hole left by the
layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4
64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN...
:-)

Many calculations that previously required that skb->{transport,network,
mac}_header be first converted to a pointer now can be done directly, being
meaningful as offsets or pointers.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:28 -07:00
Arnaldo Carvalho de Melo cfe1fc7759 [SK_BUFF]: Introduce skb_network_header_len
For the common sequence "skb->h.raw - skb->nh.raw", similar to skb->mac_len,
that is precalculated tho, don't think we need to bloat skb with one more
member, so just use this new helper, reducing the number of non-skbuff.h
references to the layer headers even more.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:19 -07:00
Arnaldo Carvalho de Melo 9c70220b73 [SK_BUFF]: Introduce skb_transport_header(skb)
For the places where we need a pointer to the transport header, it is
still legal to touch skb->h.raw directly if just adding to,
subtracting from or setting it to another layer header.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:31 -07:00
Arnaldo Carvalho de Melo 967b05f64e [SK_BUFF]: Introduce skb_set_transport_header
For the cases where the transport header is being set to a offset from
skb->data.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:17 -07:00
Arnaldo Carvalho de Melo ea2ae17d64 [SK_BUFF]: Introduce skb_transport_offset()
For the quite common 'skb->h.raw - skb->data' sequence.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:16 -07:00
Arnaldo Carvalho de Melo 0660e03f6b [SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6h
Now the skb->nh union has just one member, .raw, i.e. it is just like the
skb->mac union, strange, no? I'm just leaving it like that till the transport
layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or
->mac_header_offset?), ditto for ->{h,nh}.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:25:14 -07:00
Arnaldo Carvalho de Melo d56f90a7c9 [SK_BUFF]: Introduce skb_network_header()
For the places where we need a pointer to the network header, it is still legal
to touch skb->nh.raw directly if just adding to, subtracting from or setting it
to another layer header.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:59 -07:00
YOSHIFUJI Hideaki 1ab1457c42 [NET] IPV6: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:19:42 -08:00
Al Viro 04ce69093f [IPV6]: 'info' argument of ipv6 ->err_handler() is net-endian
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:12 -08:00
David S. Miller e4bec827fe [IPSEC] esp: Defer output IV initialization to first use.
First of all, if the xfrm_state only gets used for input
packets this entropy is a complete waste.

Secondly, it is often the case that a configuration loads
many rules (perhaps even dynamically) and they don't all
necessarily ever get used.

This get_random_bytes() call was showing up in the profiles
for xfrm_state inserts which is how I noticed this.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:17:35 -07:00
Masahide NAKAMURA aee5adb430 [XFRM] STATE: Add a hook to find offset to be inserted header in outbound.
On current kernel, ip6_find_1stfragopt() is used by IPv6 IPsec to find
offset to be inserted header in outbound for transport mode. (BTW, no
usage may be needed for IPv4 case.)  Mobile IPv6 requires another
logic for routing header and destination options header
respectively. This patch is common platform for the offset and adopts
it to IPsec.

Based on MIPL2 kernel patch.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:06:36 -07:00
Masahide NAKAMURA 7e49e6de30 [XFRM]: Add XFRM_MODE_xxx for future use.
Transformation mode is used as either IPsec transport or tunnel.
It is required to add two more items, route optimization and inbound trigger
for Mobile IPv6.
Based on MIPL2 kernel patch.

This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi>

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:05:15 -07:00
Herbert Xu 07d4ee583e [IPSEC]: Use HMAC template and hash interface
This patch converts IPsec to use the new HMAC template.  The names of
existing simple digest algorithms may still be used to refer to their
HMAC composites.

The same structure can be used by other MACs such as AES-XCBC-MAC.

This patch also switches from the digest interface to hash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-21 11:46:18 +10:00
Herbert Xu 6b7326c849 [IPSEC] ESP: Use block ciphers where applicable
This patch converts IPSec/ESP to use the new block cipher type where
applicable.  Similar to the HMAC conversion, existing algorithm names
have been kept for compatibility.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21 11:46:14 +10:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Herbert Xu 31a4ab9302 [IPSEC] proto: Move transport mode input path into xfrm_mode_transport
Now that we have xfrm_mode objects we can move the transport mode specific
input decapsulation code into xfrm_mode_transport.  This removes duplicate
code as well as unnecessary header movement in case of tunnel mode SAs
since we will discard the original IP header immediately.

This also fixes a minor bug for transport-mode ESP where the IP payload
length is set to the correct value minus the header length (with extension
headers for IPv6).

Of course the other neat thing is that we no longer have to allocate
temporary buffers to hold the IP headers for ESP and IPComp.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:28:41 -07:00
Herbert Xu e695633e21 [IPSEC]: Kill unused decap state argument
This patch removes the decap_state argument from the xfrm input hook.
Previously this function allowed the input hook to share state with
the post_input hook.  The latter has since been removed.

The only purpose for it now is to check the encap type.  However, it
is easier and better to move the encap type check to the generic
xfrm_rcv function.  This allows us to get rid of the decap state
argument altogether.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 00:52:46 -08:00
Ingo Oeser 0c600eda4b [IPV6]: Nearly complete kzalloc cleanup for net/ipv6
Stupidly use kzalloc() instead of kmalloc()/memset()
everywhere where this is possible in net/ipv6/*.c .

Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 23:01:32 -08:00
Jamal Hadi Salim 9500e8a81f [IPSEC]: Sync series - fast path
Fast path sequence updates that will generate ipsec async
events

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 19:15:29 -08:00
Joe Perches 46b86a2da0 [NET]: Use NIP6_FMT in kernel.h
There are errors and inconsistency in the display of NIP6 strings.
	ie: net/ipv6/ip6_flowlabel.c

There are errors and inconsistency in the display of NIPQUAD strings too.
	ie: net/netfilter/nf_conntrack_ftp.c

This patch:
	adds NIP6_FMT to kernel.h
	changes all code to use NIP6_FMT
	fixes net/ipv6/ip6_flowlabel.c
	adds NIPQUAD_FMT to kernel.h
	fixes net/netfilter/nf_conntrack_ftp.c
	changes a few uses of "%u.%u.%u.%u" to NIPQUAD_FMT for symmetry to NIP6_FMT

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-13 14:29:07 -08:00
Arnaldo Carvalho de Melo 14c850212e [INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h
To help in reducing the number of include dependencies, several files were
touched as they were getting needed headers indirectly for stuff they use.

Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had
linux/dccp.h include twice.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:21 -08:00
Kazunori MIYAZAWA 73d4f84fd0 [IPv6] IPsec: fix pmtu calculation of esp
It is a simple bug which uses the wrong member.

This bug does not seriously affect ordinary use of IPsec.
But it is important to pass IPv6 ready logo phase-2
conformance test of IPsec SGW.

Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-08 23:11:42 -08:00
Herbert Xu d4875b049b [IPSEC] Fix block size/MTU bugs in ESP
This patch fixes the following bugs in ESP:

* Fix transport mode MTU overestimate.  This means that the inner MTU
  is smaller than it needs be.  Worse yet, given an input MTU which
  is a multiple of 4 it will always produce an estimate which is not
  a multiple of 4.

  For example, given a standard ESP/3DES/MD5 transform and an MTU of
  1500, the resulting MTU for transport mode is 1462 when it should
  be 1464.

  The reason for this is because IP header lengths are always a multiple
  of 4 for IPv4 and 8 for IPv6.

* Ensure that the block size is at least 4.  This is required by RFC2406
  and corresponds to what the esp_output function does.  At the moment
  this only affects crypto_null as its block size is 1.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-10 21:11:34 -07:00