Commit Graph

7316 Commits

Author SHA1 Message Date
Al Viro 7efd08c855 [PATCH] uml: fix a macro typo
Fix a macro typo which could break if the macro is passed arguments with
side-effects.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:21 -07:00
Al Viro e54a5dfb96 [PATCH] uml: fix signal frame copy_user
The copy_user stuff in the signal frame code was broke.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:21 -07:00
Paolo 'Blaisorblade' Giarrusso 3b52166cf7 [PATCH] uml: fault handler micro-cleanups
Avoid chomping low bits of address for functions doing it by themselves,
fix whitespace, add a correctness checking.

I did this for remap-file-pages protection support, it was useful on its
own too.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:21 -07:00
Paolo 'Blaisorblade' Giarrusso 1e40cd383c [PATCH] uml: fixes performance regression in activate_mm and thus exec()
Normally, activate_mm() is called from exec(), and thus it used to be a
no-op because we use a completely new "MM context" on the host (for
instance, a new process), and so we didn't need to flush any "TLB entries"
(which for us are the set of memory mappings for the host process from the
virtual "RAM" file).

Kernel threads, instead, are usually handled in a different way.  So, when
for AIO we call use_mm(), things used to break and so Benjamin implemented
activate_mm().  However, that is only needed for AIO, and could slow down
exec() inside UML, so be smart: detect being called for AIO (via
PF_BORROWED_MM) and do the full flush only in that situation.

Comment also the caller so that people won't go breaking UML without
noticing.  I also rely on the caller's locks for testing current->flags.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:21 -07:00
Bodo Stroesser ed1b58d8b5 [PATCH] uml: fix SIGWINCH handler race while waiting for signals.
If a SIGWINCH comes in, while winch_thread() isn't waiting in wait(),
winch_thread could miss signals.  It isn't very probable, that anyone will
see this causing trouble, as it would need a very special timing, that a
missed SIGWINCH results in a wrong window size.

So, this is a minor problem.  But why not fix, as it can be done so easy?

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:21 -07:00
Paolo 'Blaisorblade' Giarrusso 0221575903 [PATCH] uml: workaround GDB problems on debugging
Apparently, GDB gets confused when we do an execvp() on ourselves.

Since it's simply done to allocate further space for command line arguments
(which we'll use to allow gathering the startup command line for guest
processes through the host), allow the user to disable that to get a
debuggable UML binary.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:20 -07:00
Paolo 'Blaisorblade' Giarrusso 640aa46e25 [PATCH] uml: SYSEMU: slight cleanup and speedup
As a follow-up to "UML Support - Ptrace: adds the host SYSEMU support, for
UML and general usage" (i.e.  uml-support-* in current mm).

Avoid unconditionally jumping to work_pending and code copying, just reuse
the already existing resume_userspace path.

One interesting note, from Charles P.  Wright, suggested that the API is
improvable with no downsides for UML (except that it will have to support
yet another host API, since dropping support for the current API, for UML,
is not reasonable from users' point of view).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Charles P. Wright <cwright@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:20 -07:00
Bodo Stroesser ab1c23c244 [PATCH] SYSEMU: fix sysaudit / singlestep interaction
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>

This is simply an adjustment for "Ptrace - i386: fix Syscall Audit interaction
with singlestep" to work on top of SYSEMU patches, too.  On this patch, I have
some doubts: I wonder why we need to alter that way ptrace_disable().

I left the patch this way because it has been extensively tested, but I don't
understand the reason.

The current PTRACE_DETACH handling simply clears child->ptrace; actually this
is not enough because entry.S just looks at the thread_flags; actually,
do_syscall_trace checks current->ptrace but I don't think depending on that is
good, at least for performance, so I think the clearing is done elsewhere.
For instance, on PTRACE_CONT it's done, but doing PTRACE_DETACH without
PTRACE_CONT is possible (and happens when gdb crashes and one kills it
manually).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Roland McGrath <roland@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:20 -07:00
Bodo Stroesser 1b38f0064e [PATCH] Uml support: add PTRACE_SYSEMU_SINGLESTEP option to i386
This patch implements the new ptrace option PTRACE_SYSEMU_SINGLESTEP, which
can be used by UML to singlestep a process: it will receive SINGLESTEP
interceptions for normal instructions and syscalls, but syscall execution will
be skipped just like with PTRACE_SYSEMU.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:20 -07:00
Bodo Stroesser c8c86cecd1 [PATCH] Uml support: reorganize PTRACE_SYSEMU support
With this patch, we change the way we handle switching from PTRACE_SYSEMU to
PTRACE_{SINGLESTEP,SYSCALL}, to free TIF_SYSCALL_EMU from double use as a
preparation for PTRACE_SYSEMU_SINGLESTEP extension, without changing the
behavior of the host kernel.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:20 -07:00
Laurent Vivier ed75e8d580 [PATCH] UML Support - Ptrace: adds the host SYSEMU support, for UML and general usage
Jeff Dike <jdike@addtoit.com>,
      Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it>,
      Bodo Stroesser <bstroesser@fujitsu-siemens.com>

Adds a new ptrace(2) mode, called PTRACE_SYSEMU, resembling PTRACE_SYSCALL
except that the kernel does not execute the requested syscall; this is useful
to improve performance for virtual environments, like UML, which want to run
the syscall on their own.

In fact, using PTRACE_SYSCALL means stopping child execution twice, on entry
and on exit, and each time you also have two context switches; with SYSEMU you
avoid the 2nd stop and so save two context switches per syscall.

Also, some architectures don't have support in the host for changing the
syscall number via ptrace(), which is currently needed to skip syscall
execution (UML turns any syscall into getpid() to avoid it being executed on
the host).  Fixing that is hard, while SYSEMU is easier to implement.

* This version of the patch includes some suggestions of Jeff Dike to avoid
  adding any instructions to the syscall fast path, plus some other little
  changes, by myself, to make it work even when the syscall is executed with
  SYSENTER (but I'm unsure about them). It has been widely tested for quite a
  lot of time.

* Various fixed were included to handle the various switches between
  various states, i.e. when for instance a syscall entry is traced with one of
  PT_SYSCALL / _SYSEMU / _SINGLESTEP and another one is used on exit.
  Basically, this is done by remembering which one of them was used even after
  the call to ptrace_notify().

* We're combining TIF_SYSCALL_EMU with TIF_SYSCALL_TRACE or TIF_SINGLESTEP
  to make do_syscall_trace() notice that the current syscall was started with
  SYSEMU on entry, so that no notification ought to be done in the exit path;
  this is a bit of a hack, so this problem is solved in another way in next
  patches.

* Also, the effects of the patch:
"Ptrace - i386: fix Syscall Audit interaction with singlestep"
are cancelled; they are restored back in the last patch of this series.

Detailed descriptions of the patches doing this kind of processing follow (but
I've already summed everything up).

* Fix behaviour when changing interception kind #1.

  In do_syscall_trace(), we check the status of the TIF_SYSCALL_EMU flag
  only after doing the debugger notification; but the debugger might have
  changed the status of this flag because he continued execution with
  PTRACE_SYSCALL, so this is wrong.  This patch fixes it by saving the flag
  status before calling ptrace_notify().

* Fix behaviour when changing interception kind #2:
  avoid intercepting syscall on return when using SYSCALL again.

  A guest process switching from using PTRACE_SYSEMU to PTRACE_SYSCALL
  crashes.

  The problem is in arch/i386/kernel/entry.S.  The current SYSEMU patch
  inhibits the syscall-handler to be called, but does not prevent
  do_syscall_trace() to be called after this for syscall completion
  interception.

  The appended patch fixes this.  It reuses the flag TIF_SYSCALL_EMU to
  remember "we come from PTRACE_SYSEMU and now are in PTRACE_SYSCALL", since
  the flag is unused in the depicted situation.

* Fix behaviour when changing interception kind #3:
  avoid intercepting syscall on return when using SINGLESTEP.

  When testing 2.6.9 and the skas3.v6 patch, with my latest patch and had
  problems with singlestepping on UML in SKAS with SYSEMU.  It looped
  receiving SIGTRAPs without moving forward.  EIP of the traced process was
  the same for all SIGTRAPs.

What's missing is to handle switching from PTRACE_SYSCALL_EMU to
PTRACE_SINGLESTEP in a way very similar to what is done for the change from
PTRACE_SYSCALL_EMU to PTRACE_SYSCALL_TRACE.

I.e., after calling ptrace(PTRACE_SYSEMU), on the return path, the debugger is
notified and then wake ups the process; the syscall is executed (or skipped,
when do_syscall_trace() returns 0, i.e.  when using PTRACE_SYSEMU), and
do_syscall_trace() is called again.  Since we are on the return path of a
SYSEMU'd syscall, if the wake up is performed through ptrace(PTRACE_SYSCALL),
we must still avoid notifying the parent of the syscall exit.  Now, this
behaviour is extended even to resuming with PTRACE_SINGLESTEP.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:20 -07:00
Bodo Stroesser 94c80b2598 [PATCH] Ptrace/i386: fix "syscall audit" interaction with singlestep
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>

Avoid giving two traps for singlestep instead of one, when syscall auditing is
enabled.

In fact no singlestep trap is sent on syscall entry, only on syscall exit, as
can be seen in entry.S:

# Note that in this mask _TIF_SINGLESTEP is not tested !!! <<<<<<<<<<<<<<
        testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
        jnz syscall_trace_entry
	...
syscall_trace_entry:
	...
	call do_syscall_trace

But auditing a SINGLESTEP'ed process causes do_syscall_trace to be called, so
the tracer will get one more trap on the syscall entry path, which it
shouldn't.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Roland McGrath <roland@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:19 -07:00
Jeff Dike 08b178ebf3 [PATCH] uml: Rename Kconfig files to be like the other arches
To the extent that sub-Kconfig files exist elsewhere in the tree, they are
named Kconfig.foo, rather than the Kconfig_foo that UML has.  This patch
brings the names in line with the rest of the tree.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:19 -07:00
Jeff Dike 96e59245e1 [PATCH] uml: remove debugging code from page fault path
This eliminates the segfault info ring buffer, which added a system call to
each page fault, and which hadn't been useful for debugging in ages.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:19 -07:00
Adrian Bunk 49f9ebc894 [PATCH] arch/cris/Kconfig.debug: use lib/Kconfig.debug
This patch converts arch/cris/Kconfig.debug to using lib/Kconfig.debug.

This should fix a compile error in 2.6.13-rc4 caused by a missing
CONFIG_LOG_BUF_SHIFT definition.

While I was editing this file, I also converted some spaces to tabs.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:19 -07:00
Roman Zippel 072dffda1d [PATCH] m68k: cleanup inline mem functions
Use the builtin functions for memset/memclr/memcpy, special optimizations for
page operations have dedicated functions now.  Uninline memmove/memchr and
move all functions into a single file and clean it up a little.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:19 -07:00
Roman Zippel 2855b97020 [PATCH] m68k: move cache functions into separate file
Move a few cache functions into its own file and fix flush_icache_range() so
it can handle both kernel and user addresses correctly (assuming context is
set correctly).

Turn copy_to_user_page/copy_from_user_page into inline functions and add a
missing cache flush.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:19 -07:00
Roman Zippel 69f447cffb [PATCH] m68k: sys_ptrace cleanup
- create helper function singlestep_disable()
- move variable definitions to the top of the function
- use "out_eio" label as common error destination
- don't clear failure value for PTRACE_SETREGS/PTRACE_GETREGS

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:19 -07:00
Roman Zippel b3319f50ac [PATCH] m68k: indent sys_ptrace
This reformats and properly indents sys_ptrace (only whitespace changes).

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:18 -07:00
Shaohua Li c3c433e4f3 [PATCH] add suspend/resume for timer
The timers lack .suspend/.resume methods.  Because of this, jiffies got a
big compensation after a S3 resume.  And then softlockup watchdog reports
an oops.  This occured with HPET enabled, but it's also possible for other
timers.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:18 -07:00
Pavel Machek 57c4ce3cbf [PATCH] pm: clean up /sys/power/disk
Clean code up a bit, and only show suspend to disk as available when
it is configured in.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:18 -07:00
Pavel Machek 6161b2ce81 [PATCH] pm: fix process freezing
If process freezing fails, some processes are frozen, and rest are left in
"were asked to be frozen" state.  Thats wrong, we should leave it in some
consistent state.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:17 -07:00
Pavel Machek 99dc7d63e0 [PATCH] swsusp: fix error handling and cleanups
Drop printing during normal boot (when no image exists in swap), print
message when drivers fail, fix error paths and consolidate near-identical
functions in disk.c (and functions with just one statement).

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:17 -07:00
Shaohua Li dd5d666b79 [PATCH] swsusp: add locking to software_resume
It is trying to protect swsusp_resume_device and software_resume() from two
users banging it from userspace at the same time.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:17 -07:00
Andreas Steinmetz 6ed9fcec85 [PATCH] swsusup with dm-crypt mini howto
The attached patch contains a mini howto for using dm-crypt together with
swsusp.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:17 -07:00
Michal Schmidt 56057e1a12 [PATCH] swsusp: simpler calculation of number of pages in PBE list
The function calc_nr uses an iterative algorithm to calculate the number of
pages needed for the image and the pagedir.  Exactly the same result can be
obtained with a one-line expression.

Note that this was even proved correct ;-).

Signed-off-by: Michal Schmidt <xschmi00@stud.feec.vutbr.cz>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:17 -07:00
Michal Schmidt 46dacba52a [PATCH] swsusp: prevent disks from spinning down and up
Stop the disks from spinning down and up on suspend.

Signed-off-by: Michal Schmidt <xschmi00@stud.feec.vutbr.cz>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Andreas Steinmetz c2ff18f407 [PATCH] encrypt suspend data for easy wiping
The patch protects from leaking sensitive data after resume from suspend.
During suspend a temporary key is created and this key is used to encrypt the
data written to disk.  When, during resume, the data was read back into memory
the temporary key is destroyed which simply means that all data written to
disk during suspend are then inaccessible so they can't be stolen lateron.

Think of the following: you suspend while an application is running that keeps
sensitive data in memory.  The application itself prevents the data from being
swapped out.  Suspend, however, must write these data to swap to be able to
resume lateron.  Without suspend encryption your sensitive data are then
stored in plaintext on disk.  This means that after resume your sensitive data
are accessible to all applications having direct access to the swap device
which was used for suspend.  If you don't need swap after resume these data
can remain on disk virtually forever.  Thus it can happen that your system
gets broken in weeks later and sensitive data which you thought were encrypted
and protected are retrieved and stolen from the swap device.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Pavel Machek 583a4e88db [PATCH] fix pm_message_t stuff in -mm tree
This should bits from -mm tree that are affected by pm_message_t
conversion.  [I'm not 100% sure I got all of them, but I certainly got all
the errors on make allyesconfig build, and most of warnings, too.  I'll go
through the buildlog tommorow and fix any remaining bits].

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Pavel Machek ca078bae81 [PATCH] swsusp: switch pm_message_t to struct
This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Pavel Machek 829ca9a30a [PATCH] swsusp: fix remaining u32 vs. pm_message_t confusion
Fix remaining bits of u32 vs.  pm_message confusion.  Should not break
anything.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:15 -07:00
Pavel Machek 7e958883bc [PATCH] suspend: update documentation
Update suspend documentation.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:14 -07:00
Pierre Ossman 7dc24db175 [PATCH] ISA DMA suspend for x86_64
Reset the ISA DMA controller into a known state after a suspend.  Primary
concern was reenabling the cascading DMA channel (4).

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:14 -07:00
Pierre Ossman 795312e763 [PATCH] ISA DMA suspend for i386
Reset the ISA DMA controller into a known state after a suspend.  Primary
concern was reenabling the cascading DMA channel (4).

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:14 -07:00
Pavel Machek 2a23b5d1e1 [PATCH] remove busywait in refrigerator
This should make refrigerator sleep properly, not busywait after the first
schedule() returns.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:14 -07:00
Benjamin LaHaise 52fdd08903 [PATCH] unify x86/x86-64 semaphore code
This patch moves the common code in x86 and x86-64's semaphore.c into a
single file in lib/semaphore-sleepers.c.  The arch specific asm stubs are
left in the arch tree (in semaphore.c for i386 and in the asm for x86-64).
There should be no changes in code/functionality with this patch.

Signed-off-by: Benjamin LaHaise <benjamin.c.lahaise@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:14 -07:00
Zwane Mwaikambo 4ad8d38342 [PATCH] i386 boottime for_each_cpu broken
for_each_cpu walks through all processors in cpu_possible_map, which is
defined as cpu_callout_map on i386 and isn't initialised until all
processors have been booted. This breaks things which do for_each_cpu
iterations early during boot. So, define cpu_possible_map as a bitmap with
NR_CPUS bits populated. This was triggered by a patch i'm working on which
does alloc_percpu before bringing up secondary processors.

From: Alexander Nyberg <alexn@telia.com>

i386-boottime-for_each_cpu-broken.patch
i386-boottime-for_each_cpu-broken-fix.patch

The SMP version of __alloc_percpu checks the cpu_possible_map before
allocating memory for a certain cpu.  With the above patches the BSP cpuid
is never set in cpu_possible_map which breaks CONFIG_SMP on uniprocessor
machines (as soon as someone tries to dereference something allocated via
__alloc_percpu, which in fact is never allocated since the cpu is not set
in cpu_possible_map).

Signed-off-by: Zwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:13 -07:00
Zachary Amsden d7271b14b2 [PATCH] i386: encapsulate copying of pgd entries
Add a clone operation for pgd updates.

This helps complete the encapsulation of updates to page tables (or pages
about to become page tables) into accessor functions rather than using
memcpy() to duplicate them.  This is both generally good for consistency
and also necessary for running in a hypervisor which requires explicit
updates to page table entries.

The new function is:

clone_pgd_range(pgd_t *dst, pgd_t *src, int count);

   dst - pointer to pgd range anwhere on a pgd page
   src - ""
   count - the number of pgds to copy.

   dst and src can be on the same page, but the range must not overlap
   and must not cross a page boundary.

Note that I ommitted using this call to copy pgd entries into the
software suspend page root, since this is not technically a live paging
structure, rather it is used on resume from suspend.  CC'ing Pavel in case
he has any feedback on this.

Thanks to Chris Wright for noticing that this could be more optimal in
PAE compiles by eliminating the memset.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:13 -07:00
George Anzinger 748f2edb52 [PATCH] x86 NMI: better support for debuggers
This patch adds a notify to the die_nmi notify that the system is about to
be taken down.  If the notify is handled with a NOTIFY_STOP return, the
system is given a new lease on life.

We also change the nmi watchdog to carry on if die_nmi returns.

This give debug code a chance to a) catch watchdog timeouts and b) possibly
allow the system to continue, realizing that the time out may be due to
debugger activities such as single stepping which is usually done with
"other" cpus held.

Signed-off-by: George Anzinger<george@mvista.com>
Cc: Keith Owens <kaos@ocs.com.au>
Signed-off-by: George Anzinger <george@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:13 -07:00
Zachary Amsden f2f30ebca6 [PATCH] x86: introduce a write acessor for updating the current LDT
Introduce a write acessor for updating the current LDT.  This is required
for hypervisors like Xen that do not allow LDT pages to be directly
written.

Testing - here's a fun little LDT test that can be trivially modified to
test limits as well.

/*
 * Copyright (c) 2005, Zachary Amsden (zach@vmware.com)
 * This is licensed under the GPL.
 */

#include <stdio.h>
#include <signal.h>
#include <asm/ldt.h>
#include <asm/segment.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/mman.h>
#define __KERNEL__
#include <asm/page.h>

void main(void)
{
        struct user_desc desc;
        char *code;
        unsigned long long tsc;

        code = (char *)mmap(0, 8192, PROT_EXEC|PROT_READ|PROT_WRITE,
                                 MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
        desc.entry_number = 0;
        desc.base_addr = code;
        desc.limit = 1;
        desc.seg_32bit = 1;
        desc.contents = MODIFY_LDT_CONTENTS_CODE;
        desc.read_exec_only = 0;
        desc.limit_in_pages = 1;
        desc.seg_not_present = 0;
        desc.useable = 1;
        if (modify_ldt(1, &desc, sizeof(desc)) != 0) {
                perror("modify_ldt");
        }
        printf("code base is 0x%08x\n", (unsigned)code);
        code[0x0ffe] = 0x0f;  /* rdtsc */
        code[0x0fff] = 0x31;
        code[0x1000] = 0xcb;  /* lret */
        __asm__ __volatile("lcall $7,$0xffe" : "=A" (tsc));
        printf("TSC is 0x%016llx\n", tsc);
}

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:13 -07:00
Zachary Amsden e9f86e351f [PATCH] x86: remove redundant TSS clearing
When reviewing GDT updates, I found the code:

	set_tss_desc(cpu,t);	/* This just modifies memory; ... */
        per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TSS].b &= 0xfffffdff;

This second line is unnecessary, since set_tss_desc() has already cleared
the busy bit.

Commented disassembly, line 1:

c028b8bd:       8b 0c 86                mov    (%esi,%eax,4),%ecx
c028b8c0:       01 cb                   add    %ecx,%ebx
c028b8c2:       8d 0c 39                lea    (%ecx,%edi,1),%ecx

  => %ecx = per_cpu(cpu_gdt_table, cpu)

c028b8c5:       8d 91 80 00 00 00       lea    0x80(%ecx),%edx

  => %edx = &per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TSS]

c028b8cb:       66 c7 42 00 73 20       movw   $0x2073,0x0(%edx)
c028b8d1:       66 89 5a 02             mov    %bx,0x2(%edx)
c028b8d5:       c1 cb 10                ror    $0x10,%ebx
c028b8d8:       88 5a 04                mov    %bl,0x4(%edx)
c028b8db:       c6 42 05 89             movb   $0x89,0x5(%edx)

  => ((char *)%edx)[5] = 0x89
  (equivalent) ((char *)per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TSS])[5] = 0x89

c028b8df:       c6 42 06 00             movb   $0x0,0x6(%edx)
c028b8e3:       88 7a 07                mov    %bh,0x7(%edx)
c028b8e6:       c1 cb 10                ror    $0x10,%ebx

  => other bits

Commented disassembly, line 2:

c028b8e9:       8b 14 86                mov    (%esi,%eax,4),%edx
c028b8ec:       8d 04 3a                lea    (%edx,%edi,1),%eax

  => %eax = per_cpu(cpu_gdt_table, cpu)

c028b8ef:       81 a0 84 00 00 00 ff    andl   $0xfffffdff,0x84(%eax)

  => per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TSS].b &= 0xfffffdff;
  (equivalent) ((char *)per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_TSS])[5] &= 0xfd

Note that (0x89 & ~0xfd) == 0; i.e, set_tss_desc(cpu,t) has already stored
the type field in the GDT with the busy bit clear.

Eliminating redundant and obscure code is always a good thing; in fact, I
pointed out this same optimization many moons ago in arch/i386/setup.c,
back when it used to be called that.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:13 -07:00
Zachary Amsden a520112930 [PATCH] x86: make IOPL explicit
The pushf/popf in switch_to are ONLY used to switch IOPL.  Making this
explicit in C code is more clear.  This pushf/popf pair was added as a
bugfix for leaking IOPL to unprivileged processes when using
sysenter/sysexit based system calls (sysexit does not restore flags).

When requesting an IOPL change in sys_iopl(), it is just as easy to change
the current flags and the flags in the stack image (in case an IRET is
required), but there is no reason to force an IRET if we came in from the
SYSENTER path.

This change is the minimal solution for supporting a paravirtualized Linux
kernel that allows user processes to run with I/O privilege.  Other
solutions require radical rewrites of part of the low level fault / system
call handling code, or do not fully support sysenter based system calls.

Unfortunately, this added one field to the thread_struct.  But as a bonus,
on P4, the fastest time measured for switch_to() went from 312 to 260
cycles, a win of about 17% in the fast case through this performance
critical path.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:12 -07:00
Zachary Amsden 0998e4228a [PATCH] x86: privilege cleanup
Privilege checking cleanup.  Originally, these diffs were much greater, but
recent cleanups in Linux have already done much of the cleanup.  I added
some explanatory comments in places where the reasoning behind certain
tests is rather subtle.

Also, in traps.c, we can skip the user_mode check in handle_BUG().  The
reason is, there are only two call chains - one via die_if_kernel() and one
via do_page_fault(), both entering from die().  Both of these paths already
ensure that a kernel mode failure has happened.  Also, the original check
here, if (user_mode(regs)) was insufficient anyways, since it would not
rule out BUG faults from V8086 mode execution.

Saving the %ss segment in show_regs() rather than assuming a fixed value
also gives better information about the current kernel state in the
register dump.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:12 -07:00
Zachary Amsden f2ab446124 [PATCH] x86: more asm cleanups
Some more assembler cleanups I noticed along the way.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:12 -07:00
Ingo Molnar 4f0cb8d978 [PATCH] i386: fix incorrect TSS entry for LDT
Noticed by Chuck Ebbert: the .ldt entry of the TSS was set up incorrectly.
It never mattered since this was a leftover from old times, so remove it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:12 -07:00
Zachary Amsden c9b02a2413 [PATCH] i386: use set_pte macros in a couple places where they were missing
Also, setting PDPEs in PAE mode does not require atomic operations, since the
PDPEs are cached by the processor, and only reloaded on an explicit or
implicit reload of CR3.

Since the four PDPEs must always be present in an active root, and the kernel
PDPE is never updated, we are safe even from SMIs and interrupts / NMIs using
task gates (which reload CR3).  Actually, much of this is moot, since the user
PDPEs are never updated either, and the only usage of task gates is by the
doublefault handler.  It appears the only place PGDs get updated in PAE mode
is in init_low_mappings() / zap_low_mapping() for initial page table creation
and recovery from ACPI sleep state, and these sites are safe by inspection.
Getting rid of the cmpxchg8b saves code space and 720 cycles in pgd_alloc on
P4.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:12 -07:00
Zachary Amsden e7a2ff593c [PATCH] i386: load_tls() fix
Subtle fix: load_TLS has been moved after saving %fs and %gs segments to avoid
creating non-reversible segments.  This could conceivably cause a bug if the
kernel ever needed to save and restore fs/gs from the NMI handler.  It
currently does not, but this is the safest approach to avoiding fs/gs
corruption.  SMIs are safe, since SMI saves the descriptor hidden state.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:11 -07:00
Zachary Amsden 2f2984eb4a [PATCH] i386: generate better code around descriptor update and access functions
GCC can generate better code around descriptor update and access functions
when there is not an explicit "eax" register constraint.

Testing: You won't boot if this is messed up, since the TSS descriptor will be
corrupted.  Verified the assembler and booted.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:11 -07:00
Zachary Amsden 4d37e7e3fd [PATCH] i386: inline assembler: cleanup and encapsulate descriptor and task register management
i386 inline assembler cleanup.

This change encapsulates descriptor and task register management.  Also,
it is possible to improve assembler generation in two cases; savesegment
may store the value in a register instead of a memory location, which
allows GCC to optimize stack variables into registers, and MOV MEM, SEG
is always a 16-bit write to memory, making the casting in math-emu
unnecessary.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:11 -07:00
Zachary Amsden 245067d167 [PATCH] i386: cleanup serialize msr
i386 arch cleanup.  Introduce the serialize macro to serialize processor
state.  Why the microcode update needs it I am not quite sure, since wrmsr()
is already a serializing instruction, but it is a microcode update, so I will
keep the semantic the same, since this could be a timing workaround.  As far
as I can tell, this has always been there since the original microcode update
source.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:11 -07:00