Commit Graph

100 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt cb52d8970e powerpc+sparc/vio: Modernize driver registration
This makes vio_register_driver() get the module owner & name at compile
time like PCI drivers do, and adds a name pointer directly in struct
vio_driver to avoid having to explicitly initialize the embedded
struct device.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David S. Miller <davem@davemloft.net>
2012-03-28 11:33:24 +11:00
Linus Torvalds d4c6fa73fe Features:
- PV multiconsole support, so that there can be hvc1, hvc2, etc;
  - P-state and C-state power management driver that uploads said
    power management data to the hypervisor. It also inhibits cpufreq
    scaling drivers to load so that only the hypervisor can make power
    management decisions - fixing a weird perf bug.
  - Function Level Reset (FLR) support in the Xen PCI backend.
 Fixes:
  - Kconfig dependencies for Xen PV keyboard and video
  - Compile warnings and constify fixes
  - Change over to use percpu_xxx instead of this_cpu_xxx
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJPZ0qkAAoJEFjIrFwIi8fJjCgH/jeJ39E8ML8DP9tCS2HQnMqM
 uTEjLcqvoJ7sEhHvtBLPeG2p0jyBvOWjLbSc7P8nESBAMPvSYol8L6WqfWrdSU4r
 lHrma2sg9UYzRog5NyxAgkp7bBsBBFOnhVL3Cxb5Ig78cPWzeSWGpqGZ8M/d51Wf
 1iE0tHuU4DpN+fg1SZqPqEm8ecEJ/eSrVTnyTx/Qo2Ak+Zw98SqzX7SV5lo8mudd
 WFL1F2K9FyTNk79ndGhqFt36x6nEbFgMLbmCDWumLuWN6bMd1Uq0wNkCqW4F1h28
 3yqnY+rfQh4y3eXK1B9nttCUTs+/66U5ZWrT6B1IJumGTAIqcWfgeUX/Vn/HVC4=
 =tfMc
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull xen updates from Konrad Rzeszutek Wilk:
 "which has three neat features:

   - PV multiconsole support, so that there can be hvc1, hvc2, etc; This
     can be used in HVM and in PV mode.

   - P-state and C-state power management driver that uploads said power
     management data to the hypervisor.  It also inhibits cpufreq
     scaling drivers to load so that only the hypervisor can make power
     management decisions - fixing a weird perf bug.

     There is one thing in the Kconfig that you won't like: "default y
     if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it
     all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by
     default is off).  I've a fix to convert that boolean expression
     into "default m" which I am going to post after the cpufreq git
     pull - as the two patches to make this work depend on a fix in Dave
     Jones's tree.

   - Function Level Reset (FLR) support in the Xen PCI backend.

  Fixes:

   - Kconfig dependencies for Xen PV keyboard and video
   - Compile warnings and constify fixes
   - Change over to use percpu_xxx instead of this_cpu_xxx"

Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to
a removed commit.

* tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps
  xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.
  xen: constify all instances of "struct attribute_group"
  xen/xenbus: ignore console/0
  hvc_xen: introduce HVC_XEN_FRONTEND
  hvc_xen: implement multiconsole support
  hvc_xen: support PV on HVM consoles
  xenbus: don't free other end details too early
  xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it.
  xen/setup/pm/acpi: Remove the call to boot_option_idle_override.
  xenbus: address compiler warnings
  xen: use this_cpu_xxx replace percpu_xxx funcs
  xen/pciback: Support pci_reset_function, aka FLR or D3 support.
  pci: Introduce __pci_reset_function_locked to be used when holding device_lock.
  xen: Utilize the restore_msi_irqs hook.
2012-03-22 20:16:14 -07:00
Linus Torvalds 5375871d43 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc merge from Benjamin Herrenschmidt:
 "Here's the powerpc batch for this merge window.  It is going to be a
  bit more nasty than usual as in touching things outside of
  arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
  rid of the bugger (legacy iSeries support) which was a PITA to
  maintain and that nobody really used anymore.

  Here are some of the highlights:

   - Legacy iSeries is gone.  Thanks Stephen ! There's still some bits
     and pieces remaining if you do a grep -ir series arch/powerpc but
     they are harmless and will be removed in the next few weeks
     hopefully.

   - The 'fadump' functionality (Firmware Assisted Dump) replaces the
     previous (equivalent) "pHyp assisted dump"...  it's a rewrite of a
     mechanism to get the hypervisor to do crash dumps on pSeries, the
     new implementation hopefully being much more reliable.  Thanks
     Mahesh Salgaonkar.

   - The "EEH" code (pSeries PCI error handling & recovery) got a big
     spring cleaning, motivated by the need to be able to implement a
     new backend for it on top of some new different type of firwmare.

     The work isn't complete yet, but a good chunk of the cleanups is
     there.  Note that this adds a field to struct device_node which is
     not very nice and which Grant objects to.  I will have a patch soon
     that moves that to a powerpc private data structure (hopefully
     before rc1) and we'll improve things further later on (hopefully
     getting rid of the need for that pointer completely).  Thanks Gavin
     Shan.

   - I dug into our exception & interrupt handling code to improve the
     way we do lazy interrupt handling (and make it work properly with
     "edge" triggered interrupt sources), and while at it found & fixed
     a wagon of issues in those areas, including adding support for page
     fault retry & fatal signals on page faults.

   - Your usual random batch of small fixes & updates, including a bunch
     of new embedded boards, both Freescale and APM based ones, etc..."

I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
  powerpc/ps3: Do not adjust the wrapper load address
  powerpc: Remove the rest of the legacy iSeries include files
  powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
  init: Remove CONFIG_PPC_ISERIES
  powerpc: Remove FW_FEATURE ISERIES from arch code
  tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
  powerpc/spufs: Fix double unlocks
  powerpc/5200: convert mpc5200 to use of_platform_populate()
  powerpc/mpc5200: add options to mpc5200_defconfig
  powerpc/mpc52xx: add a4m072 board support
  powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
  Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
  powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
  powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
  MAINTAINERS: Update PowerPC 4xx tree
  powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
  powerpc: document the FSL MPIC message register binding
  powerpc: add support for MPIC message register API
  powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
  powerpc/85xx: mpc8548cds - add 36-bit dts
  ...
2012-03-21 18:55:10 -07:00
Stephen Rothwell ec86b45af4 tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
so remove the code that tests for it.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-21 11:16:11 +11:00
Benjamin Herrenschmidt 7d3d897a46 powerpc/hvc_udbg: Don't crash when udbg_putc is NULL
Also while at it, add some help text indicating why you shouldn't
enable that driver under normal circumstances

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-16 09:28:15 +11:00
Stefano Stabellini cf8e019b52 hvc_xen: introduce HVC_XEN_FRONTEND
Introduce a new config option HVC_XEN_FRONTEND to enable/disable the
xenbus based pv console frontend.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-13 19:24:31 -04:00
Stefano Stabellini 02e19f9c7c hvc_xen: implement multiconsole support
This patch implements support for multiple consoles:
consoles other than the first one are setup using the traditional xenbus
and grant-table based mechanism.
We use a list to keep track of the allocated consoles, we don't
expect too many of them anyway.

Changes in v3:

- call hvc_remove before removing the console from xenconsoles;
- do not lock xencons_lock twice in the destruction path;
- use the DEFINE_XENBUS_DRIVER macro.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-13 19:23:41 -04:00
Stefano Stabellini eb5ef07151 hvc_xen: support PV on HVM consoles
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-13 19:23:32 -04:00
Stephen Rothwell b66808910d tty: powerpc: remove hvc_iseries
The PowerPC legacy iSeries platform is being removed, so this code is no
longer needed.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-09 10:35:17 +11:00
Jiri Slaby 410235fd4d TTY: remove unneeded tty->index checks
Checking if tty->index is in bounds is not needed. The tty has the
index set in the initial open. This is done in get_tty_driver. And it
can be only in interval <0,driver->num).

So remove the tests which check exactly this interval. Some are
left untouched as they check against the current backing device count.
(Leaving apart that the check is racy in most of the cases.)

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:42:21 -08:00
Jiri Slaby 2f16669d32 TTY: remove re-assignments to tty_driver members
All num, magic and owner are set by alloc_tty_driver. No need to
re-set them on each allocation site.

pti driver sets something different to what it passes to
alloc_tty_driver. It is not a bug, since we don't use the lines
parameter in any way. Anyway this is fixed, and now we do the right
thing.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:37:58 -08:00
Alan Cox d4e33fac24 serial: Kill off NO_IRQ
We transform the offenders into a test of irq <= 0 which will be ok while
the ARM people get their platform sorted. Once that is done (or in a while
if they don't do it anyway) then we will change them all to !irq checks.

For arch specific drivers that are already using NO_IRQ = 0 we just test
against zero so we don't need to re-review them later.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26 17:14:50 -08:00
Stephen Boyd c2a3e84f95 tty: hvc_dcc: Fix duplicate character inputs
Reading from the DCC grabs a character from the buffer and
clears the status bit. Since this is a context-changing
operation, instructions following the character read that rely on
the status bit being accurate need to be synchronized with an
ISB.

In this case, the status bit check needs to execute after the
character read otherwise we run the risk of reading the character
and checking the status bit before the read can clear the status
bit in the first place. When this happens, the user will see the
same character they typed twice, instead of once.

Add an ISB after the read and the write, so that the status check
is synchronized with the read/write operations.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-15 12:02:13 -08:00
Linus Torvalds 31555213f0 Revert "hvc_console: display printk messages on console."
This reverts commit 361162459f.

It causes an infinite loop when booting Linux under Xen, as so:

  [    2.382984] console [hvc0] enabled
  [    2.382984] console [hvc0] enabled
  [    2.382984] console [hvc0] enabled
  ...

as reported by Konrad Rzeszutek Wilk.  And Rusty reports the same for
lguest.  He goes on to say:

   "This is not a concurrency problem: the issue seems to be that
    calling register_console() twice on the same struct console is a bad
    idea."

and Greg says he'll fix it up properly at some point later. Revert for now.

Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-by: Rusty Russell <rusty@ozlabs.org>
Requested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Miche Baker-Harvey <miche@google.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-06 22:22:16 -08:00
Michael Neuling 0084e4751e powerpc: fix building hvc_opal.c
Fix building following build error:

  drivers/tty/hvc/hvc_opal.c:244:12: error: 'THIS_MODULE' undeclared here (not in a function)

Signed-off-by: Michael Neuling <mikey@neuling.org>
[ New file from powerpc tree not following the new rules from the
  module.h split, both of which were merged today.  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-06 22:21:18 -08:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Linus Torvalds 1197ab2942 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits)
  powerpc/p3060qds: Add support for P3060QDS board
  powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX
  powerpc/85xx: Make kexec to interate over online cpus
  powerpc/fsl_booke: Fix comment in head_fsl_booke.S
  powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices
  powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver
  powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver
  powerpc/86xx: Correct Gianfar support for GE boards
  powerpc/cpm: Clear muram before it is in use.
  drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager
  powerpc/fsl_msi: add support for "msi-address-64" property
  powerpc/85xx: Setup secondary cores PIR with hard SMP id
  powerpc/fsl-booke: Fix settlbcam for 64-bit
  powerpc/85xx: Adding DCSR node to dtsi device trees
  powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards
  powerpc/85xx: fix PHYS_64BIT selection for P1022DS
  powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map
  powerpc: respect mem= setting for early memory limit setup
  powerpc: Update corenet64_smp_defconfig
  powerpc: Update mpc85xx/corenet 32-bit defconfigs
  ...

Fix up trivial conflicts in:
 - arch/powerpc/configs/40x/hcu4_defconfig
	removed stale file, edited elsewhere
 - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c:
	added opal and gelic drivers vs added ePAPR driver
 - drivers/tty/serial/8250.c
	moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-06 17:12:03 -08:00
Paul Gortmaker 578b9ce009 tty: Add module.h to drivers/tty users who just expect it there.
We are cleaning up the issue that means module.h is omnipresent.
These tty users are the people who implictly are relying on that.
Fix up the real users to call out the include that they really need.

In the case of jsm_driver.c file, it had moduleparam.h but that
isn't enough and it needs the full module.h

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:27 -04:00
Miche Baker-Harvey 361162459f hvc_console: display printk messages on console.
printk only works for "registered consoles."  Currently, the hvc_console
code calls register_console() from hvc_instantiate(), but that's only
used in the early console case.  In hvc_alloc(), register_console() was
not called.

Add a call to register_console() in hvc_alloc(), set up the index in
the hvc_console, and set up the necessary vtermnos[] and cons_op[]
entries so that printk functions work.

Signed-off-by: Miche Baker-Harvey <miche@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-18 14:17:10 -07:00
Yong Zhang 9cfb5c05fe TTY: irq: Remove IRQF_DISABLED
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 16:08:57 -07:00
Benjamin Herrenschmidt daea1175a9 powerpc/powernv: Support for OPAL console
This adds a udbg and an hvc console backend for supporting a console
using the OPAL console interfaces.

On OPAL v1 we have hvc0 mapped to whatever console the system was
configured for (network or hvsi serial port) via the service
processor.

On OPAL v2 we have hvcN mapped to the Nth console provided by OPAL
which generally corresponds to:

	hvc0 : network console (raw protocol)
	hvc1 : serial port S1 (hvsi)
	hvc2 : serial port S2 (hvsi)

Note: At this point, early debug console only works with OPAL v1
and shouldn't be enabled in a normal kernel.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 16:09:54 +10:00
Brian King ac07a4a57f hvcs: Ensure page aligned partner info buffer
The Power platform requires the partner info buffer to be page aligned
otherwise it will fail the partner info hcall with H_PARAMETER. Switch
from using kmalloc to allocate this buffer to __get_free_page to ensure
page alignment.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 15:53:24 +10:00
Jiri Slaby 0b058353ab TTY: use tty_wait_until_sent_from_close in other drivers
Let's use the newly added helper to avoid stalls in drivers which are
not yet ported to tty_port helpers.

Those which are broken (call tty_wait_until_sent with irqs disabled)
are left untouched. They are in a deeper trouble than we are trying to
solve here. This includes amiserial, 68328serial, 68360serial and
crisv10.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-25 09:00:42 -07:00
Benjamin Herrenschmidt f7723f0eaf powerpc/pseries: Fix hvc_vio.c build due to recent changes
For some reason I didn't notice the failure in my test builds,
probably lacking caffeine or something...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-20 18:01:48 +10:00
Anton Blanchard 762e77ae7d hvc_console: Add kdb support
Add poll_get_char and poll_put_char for kdb. Enable kdb at boot with:

kgdboc=hvc0

or at runtime with:

echo hvc0 > /sys/module/kgdboc/parameters/kgdboc

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19 15:13:07 +10:00
Anton Blanchard 19df9abdd3 powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon
commit 4d2bb3f500 (powerpc/pseries: Re-implement HVSI as part of
hvc_vio) changed udbg_getc to be based on hvterm_raw_get_chars.
Unfortunately hvterm_raw_get_chars returns -EAGAIN if you ask
for anything less than 16 characters. As a result xmon no longer
accepts input and prints a stream of junk to the screen.

The recent change highlights a problem that xmon on pseries VIO
has had all along, that it can drop input characters. The issue
is the hypervisor call does not take a count argument and can
return up to 16 characters.

This patch adds a per vterm buffer that we copy input data into
and give it out as requested.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19 15:13:07 +10:00
Hendrik Brueckner 8c2381af0d hvc_console: Improve tty/console put_chars handling
Currently, the hvc_console_print() function drops console output if the
hvc backend's put_chars() returns 0.  This patch changes this behavior
to allow a retry through returning -EAGAIN.

This change also affects the hvc_push() function.  Both functions are
changed to handle -EAGAIN and to retry the put_chars() operation.

If a hvc backend returns -EAGAIN, the retry handling differs:

  - hvc_console_print() spins to write the complete console output.
  - hvc_push() behaves the same way as for returning 0.

Now hvc backends can indirectly control the way how console output is
handled through the hvc console layer.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-19 15:13:05 +10:00
Benjamin Herrenschmidt 87fa35dd88 powerpc/hvsi: Fix conflict with old HVSI driver
A mix of think & mismerge on my side caused a problem where both the
new hvsi_lib and the old hvsi driver gets compiled and try to define
symbols with the same name.

This fixes it by renaming the hvsi_lib exported symbols.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-01 13:10:21 +10:00
Benjamin Herrenschmidt 17bdc6c0e9 powerpc/pseries: Move hvsi support into a library
This will allow a different backend to share it

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29 17:48:37 +10:00
Benjamin Herrenschmidt 4d2bb3f500 powerpc/pseries: Re-implement HVSI as part of hvc_vio
On pseries machines, consoles are provided by the hypervisor using
a low level get_chars/put_chars type interface. However, this is
really just a transport to the service processor which implements
them either as "raw" console (networked consoles, HMC, ...) or as
"hvsi" serial ports.

The later is a simple packet protocol on top of the raw character
interface that is supposed to convey additional "serial port" style
semantics. In practice however, all it does is provide a way to
read the CD line and set/clear our DTR line, that's it.

We currently implement the "raw" protocol as an hvc console backend
(/dev/hvcN) and the "hvsi" protocol using a separate tty driver
(/dev/hvsi0).

However this is quite impractical. The arbitrary difference between
the two type of devices has been a major source of user (and distro)
confusion. Additionally, there's an additional mini -hvsi implementation
in the pseries platform code for our low level debug console and early
boot kernel messages, which means code duplication, though that low
level variant is impractical as it's incapable of doing the initial
protocol negociation to establish the link to the FSP.

This essentially replaces the dedicated hvsi driver and the platform
udbg code completely by extending the existing hvc_vio backend used
in "raw" mode so that:

 - It now supports HVSI as well
 - We add support for hvc backend providing tiocm{get,set}
 - It also provides a udbg interface for early debug and boot console

This is overall less code, though this will only be obvious once we
remove the old "hvsi" driver, which is still available for now. When
the old driver is enabled, the new code still kicks in for the low
level udbg console, replacing the old mini implementation in the platform
code, it just doesn't provide the higher level "hvc" interface.

In addition to producing generally simler code, this has several benefits
over our current situation:

 - The user/distro only has to deal with /dev/hvcN for the hypervisor
console, avoiding all sort of confusion that has plagued us in the past

 - The tty, kernel and low level debug console all use the same code
base which supports the full protocol establishment process, thus the
console is now available much earlier than it used to be with the
old HVSI driver. The kernel console works much earlier and udbg is
available much earlier too. Hackers can enable a hard coded very-early
debug console as well that works with HVSI (previously that was only
supported for the "raw" mode).

I've tried to keep the same semantics as hvsi relative to how I react
to things like CD changes, with some subtle differences though:

 - I clear DTR on close if HUPCL is set

 - Current hvsi triggers a hangup if it detects a up->down transition
   on CD (you can still open a console with CD down). My new implementation
   triggers a hangup if the link to the FSP is severed, and severs it upon
   detecting a up->down transition on CD.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29 17:48:35 +10:00
Benjamin Herrenschmidt 048bee7718 powerpc/pseries: Factor HVSI header struct in packet definitions
Embed the struct hvsi_header in the various packet definitions
rather than open coding it multiple times. Will help provide
stronger type checking.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29 17:48:30 +10:00
Benjamin Herrenschmidt 725e789f22 powerpc/hvsi: Move HVSI protocol definitions to a header file
This moves various HVSI protocol definitions from the hvsi.c
driver to a header file that can be used later on by a udbg
implementation

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29 17:48:28 +10:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Thomas Gleixner dced35aeb0 drivers: Final irq namespace conversion
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Linus Torvalds e16b396ce3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-18 10:37:40 -07:00
Linus Torvalds 0a95d92c00 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (62 commits)
  powerpc/85xx: Fix signedness bug in cache-sram
  powerpc/fsl: 85xx: document cache sram bindings
  powerpc/fsl: define binding for fsl mpic interrupt controllers
  powerpc/fsl_msi: Handle msi-available-ranges better
  drivers/serial/ucc_uart.c: Add of_node_put to avoid memory leak
  powerpc/85xx: Fix SPE float to integer conversion failure
  powerpc/85xx: Update sata controller compatible for p1022ds board
  ATA: Add FSL sata v2 controller support
  powerpc/mpc8xxx_gpio: simplify searching for 'fsl, qoriq-gpio' compatiable
  powerpc/8xx: remove obsolete mgsuvd board
  powerpc/82xx: rename and update mgcoge board support
  powerpc/83xx: rename and update kmeter1
  powerpc/85xx: Workaroudn e500 CPU erratum A005
  powerpc/fsl_pci: Add support for FSL PCIe controllers v2.x
  powerpc/85xx: Fix writing to spin table 'cpu-release-addr' on ppc64e
  powerpc/pseries: Disable MSI using new interface if possible
  powerpc: Enable GENERIC_HARDIRQS_NO_DEPRECATED.
  powerpc: core irq_data conversion.
  powerpc: sysdev/xilinx_intc irq_data conversion.
  powerpc: sysdev/uic irq_data conversion.
  ...

Fix up conflicts in arch/powerpc/sysdev/fsl_msi.c (due to getting rid of
of_platform_driver in arch/powerpc)
2011-03-18 06:31:43 -07:00
Linus Torvalds 514af9f790 Merge branches 'stable/hvc-console', 'stable/gntalloc.v6' and 'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/hvc-console' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/hvc: Disable probe_irq_on/off from poking the hvc-console IRQ line.

* 'stable/gntalloc.v6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: gntdev: fix build warning
  xen/p2m/m2p/gnttab: do not add failed grant maps to m2p override
  xen-gntdev: Add cast to pointer
  xen-gntdev: Fix incorrect use of zero handle
  xen: change xen/[gntdev/gntalloc] to default m
  xen-gntdev: prevent using UNMAP_NOTIFY_CLEAR_BYTE on read-only mappings
  xen-gntdev: Avoid double-mapping memory
  xen-gntdev: Avoid unmapping ranges twice
  xen-gntdev: Use map->vma for checking map validity
  xen-gntdev: Fix unmap notify on PV domains
  xen-gntdev: Fix memory leak when mmap fails
  xen/gntalloc,gntdev: Add unmap notify ioctl
  xen-gntalloc: Userspace grant allocation driver
  xen-gntdev: Support mapping in HVM domains
  xen-gntdev: Add reference counting to maps
  xen-gntdev: Use find_vma rather than iterating our vma list manually
  xen-gntdev: Change page limit to be global instead of per-open

* 'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (24 commits)
  xen-gntdev: Use ballooned pages for grant mappings
  xen-balloon: Add interface to retrieve ballooned pages
  xen-balloon: Move core balloon functionality out of module
  xen/balloon: Remove pr_info's and don't alter retry_count
  xen/balloon: Protect against CPU exhaust by event/x process
  xen/balloon: Migration from mod_timer() to schedule_delayed_work()
  xen/balloon: Removal of driver_pages
2011-03-17 18:16:36 -07:00
Konrad Rzeszutek Wilk bbd5a762b4 xen/hvc: Disable probe_irq_on/off from poking the hvc-console IRQ line.
This fixes a particular nasty racing problem found when using
Xen hypervisor with the console (hvc) output being routed to the
serial port and the serial port receiving data when
probe_irq_off(probe_irq_on) is running.

Specifically the bug manifests itself with:

[    4.470693] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[    4.470693] IP: [<ffffffff810a8c65>] handle_IRQ_event+0xe/0xc9
..snip..
[    4.470693] Call Trace:
[    4.470693]  <IRQ>
[    4.470693]  [<ffffffff810aa645>] handle_percpu_irq+0x3c/0x69
[    4.470693]  [<ffffffff8123cda7>] __xen_evtchn_do_upcall+0xfd/0x195
[    4.470693]  [<ffffffff810308cf>] ? xen_restore_fl_direct_end+0x0/0x1
[    4.470693]  [<ffffffff8123d873>] xen_evtchn_do_upcall+0x32/0x47
[    4.470693]  [<ffffffff81034dfe>] xen_do_hypervisor_callback+0x1e/0x30
[    4.470693]  <EOI>
[    4.470693]  [<ffffffff8100922a>] ? hypercall_page+0x22a/0x1000
[    4.470693]  [<ffffffff8100922a>] ? hypercall_page+0x22a/0x1000
[    4.470693]  [<ffffffff810301c5>] ? xen_force_evtchn_callback+0xd/0xf
[    4.470693]  [<ffffffff810308e2>] ? check_events+0x12/0x20
[    4.470693]  [<ffffffff81030889>] ? xen_irq_enable_direct_end+0x0/0x7
[    4.470693]  [<ffffffff810ab0a0>] ? probe_irq_on+0x8f/0x1d7
[    4.470693]  [<ffffffff812b105e>] ? serial8250_config_port+0x7b7/0x9e6
[    4.470693]  [<ffffffff812ad66c>] ? uart_add_one_port+0x11b/0x305

The bug is trigged by three actors working together:
 A). serial_8250_config_port calling
	probe_irq_off(probe_irq_on())
     wherein all of the IRQ handlers are being started and shut off.
     The functions utilize the sleep functions so the minimum time
     they are run is 120 msec.
 B). Xen hypervisor receiving on the serial line any character and
     setting the bits in the event channel - during this 120 msec timeframe.
 C). The hvc API makes a call to 'request_irq' (and hence setting desc->action
     to a valid value), much much later - when user space opens
     /dev/console (hvc_open). To make the console usable during bootup,
     the Xen HVC implementation sets the IRQ chip (and correspondingly
     the event channel) much earlier. The IRQ chip handler that is used
     is the handle_percpu_irq (aaca49642b)

Back to the issue. When A) is being called it ends up calling the
xen_percpu_chip's chip->startup twice and chip->shutdown once. Those
are set to the default_startup and mask_irq (events.c) respectivly.
If (and this seems to depend on what serial concentrator you use), B)
gets data from the serial port it sets in the event channel a pending bit.
When A) calls chip->startup(), the masking of the pending bit, and
unmasking of the event channel mask, and also setting of the upcall_pending
flag is done (since there is data present on the event channel).
If before the 120 msec has elapsed, any IRQ handler (Xen IRQ has one
IRQ handler, which checks the event channels bitmap to figure which one
to call) is called we end up calling the handle_percpu_irq. The
handle_percpu_irq calls desc->action (which is NULL) and we blow up.

Caveats: I could only reproduce this on 2.6.32 pvops. I am not sure
why this is not showing up on 2.6.38 kernel.

The probe_irq_on/off has code to disable poking specific IRQ lines. This is
done by using the set_irq_noprobe() and then we do not have to
worry about the handle_percpu_irq being called before the IRQ action
handler has been installed.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 00:57:59 -05:00
Benjamin Herrenschmidt c7704d352d powerpc/pseries: Reduce HVCS driver insanity
The HVCS driver, for those who don't know, is a driver for the "server" side
of the IBM virtual terminal mechanism allowing Linux partitions to act as
terminal servers under IBM PowerVM hypervisor. It's almost never used on
the field at the moment.

However, it's part of our configs, and in its current incarnation, will
allocate the tty driver & major (with 64 minors) and create a kernel thread
whether it's used or not, ie, whether the hypervisor did put a virtual
terminal server device node in the partition or not (or whether running on
a pseries machine or not even).

This in turns causes modern distro's udev's to start trying to open all
those 64 minors at boot, which, since they aren't linked to anything,
causes the driver to spew errors in the kernel log for each of them.

Not nice.

This moves all that initialization to a function which is now only called
the first time a terminal server virtual IO device is actually probed
(that is almost never).

There's still a _LOT_ of cleanup that can be done in this driver, some
simple (almost all printk's statements in there shall either just be
removed or in some case turned into better written & more informative
messages, including using the dev_* variants etc...). This is left as
an exercise for whoever actually cares about that driver.

One could also try to be smart and dispose of all the tty related
resources when the last instance of the VIO server device
is removed (Hotplug anybody ?).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-02 16:50:25 +11:00
Greg Kroah-Hartman f227e08b71 Merge 2.6.38-rc6 into tty-next
This was to resolve a merge issue with drivers/char/Makefile and
drivers/tty/serial/68328serial.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24 11:36:31 -08:00
Greg Kroah-Hartman bdcffc5a1a tty: move Kconfig entries into drivers/tty from drivers/char
The Kconfig options for the drivers/tty/ files still were hanging around
in the "big" drivers/char/Kconfig file, so move them to the proper
location under drivers/tty and drivers/tty/hvc/

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 15:41:47 -08:00
Alan Cox 20b9d17715 tiocmset: kill the file pointer argument
Doing tiocmget was such fun we should do tiocmset as well for the same
reasons

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:52:43 -08:00
Alan Cox 60b33c133c tiocmget: kill off the passing of the struct file
We don't actually need this and it causes problems for internal use of
this functionality. Currently there is a single use of the FILE * pointer.
That is the serial core which uses it to check tty_hung_up_p. However if
that is true then IO_ERROR is also already set so the check may be removed.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:47:33 -08:00
Mike Frysinger 5427bcf5e9 hvc: add Blackfin JTAG console support
This converts the existing bfin_jtag_comm TTY driver to the HVC layer so
that the common HVC code can worry about all of the TTY/polling crap and
leave the Blackfin code to worry about the Blackfin bits.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:12:40 -08:00
Paul Bolle 46a1ca7068 hvcs: fix typo in comment
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-15 10:24:53 +01:00
Stephen Boyd 8e6d3fe1af hvc_dcc: Simplify assembly for v6 and v7 ARM
The inline assembly differences for v6 vs. v7 in the hvc_dcc
driver are purely optimizations. On a v7 processor, an mrc with
the pc sets the condition codes to the 28-31 bits of the register
being read. It just so happens that the TX/RX full bits the DCC
driver is testing for are high enough in the register to be put
into the condition codes. On a v6 processor, this "feature" isn't
implemented and thus we have to do the usual read, mask, test
operations to check for TX/RX full.

Since we already test the RX/TX full bits before calling
__dcc_getchar() and __dcc_putchar() we don't actually need to do
anything special for v7 over v6. The only difference is in
hvc_dcc_get_chars(). We would test RX full, poll RX full, and
then read a character from the buffer, whereas now we will test
RX full, read a character from the buffer, and then test RX full
again for the second iteration of the loop. It doesn't seem
possible for the buffer to go from full to empty between testing
the RX full and reading a character. Therefore, replace the v7
versions with the v6 versions and everything works the same.

Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 16:05:43 -08:00
Stephen Boyd bf73bd35a2 hvc_dcc: Simplify put_chars()/get_chars() loops
Casting and anding with 0xff is unnecessary in
hvc_dcc_put_chars() since buf is already a char[].
__dcc_get_char() can't return an int less than 0 since it only
returns a char. Simplify the if statement in hvc_dcc_get_chars()
to take this into account.

Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 16:05:43 -08:00
Stephen Boyd a996320146 hvc_dcc: Fix bad code generation by marking assembly volatile
Without marking the asm __dcc_getstatus() volatile my compiler
decides it can cache the value of __ret in a register and then
check the value of it continually in hvc_dcc_put_chars() (I had
to replace get_wait/put_wait with 1 and fixup the branch
otherwise my disassembler barfed on __dcc_(get|put)char).

00000000 <hvc_dcc_put_chars>:
   0:   ee103e11        mrc     14, 0, r3, cr0, cr1, {0}
   4:   e3a0c000        mov     ip, #0  ; 0x0
   8:   e2033202        and     r3, r3, #536870912      ; 0x20000000
   c:   ea000006        b       2c <hvc_dcc_put_chars+0x2c>
  10:   e3530000        cmp     r3, #0  ; 0x0
  14:   1afffffd        bne     10 <hvc_dcc_put_chars+0x10>
  18:   e7d1000c        ldrb    r0, [r1, ip]
  1c:   ee10fe11        mrc     14, 0, pc, cr0, cr1, {0}
  20:   2afffffd        bcs     1c <hvc_dcc_put_chars+0x1c>
  24:   ee000e15        mcr     14, 0, r0, cr0, cr5, {0}
  28:   e28cc001        add     ip, ip, #1      ; 0x1
  2c:   e15c0002        cmp     ip, r2
  30:   bafffff6        blt     10 <hvc_dcc_put_chars+0x10>
  34:   e1a00002        mov     r0, r2
  38:   e12fff1e        bx      lr

As you can see, the value of the mrc is checked against
DCC_STATUS_TX (bit 29) and then stored in r3 for later use.
Marking the asm volatile produces the following:

00000000 <hvc_dcc_put_chars>:
   0:   e3a03000        mov     r3, #0  ; 0x0
   4:   ea000007        b       28 <hvc_dcc_put_chars+0x28>
   8:   ee100e11        mrc     14, 0, r0, cr0, cr1, {0}
   c:   e3100202        tst     r0, #536870912  ; 0x20000000
  10:   1afffffc        bne     8 <hvc_dcc_put_chars+0x8>
  14:   e7d10003        ldrb    r0, [r1, r3]
  18:   ee10fe11        mrc     14, 0, pc, cr0, cr1, {0}
  1c:   2afffffd        bcs     18 <hvc_dcc_put_chars+0x18>
  20:   ee000e15        mcr     14, 0, r0, cr0, cr5, {0}
  24:   e2833001        add     r3, r3, #1      ; 0x1
  28:   e1530002        cmp     r3, r2
  2c:   bafffff5        blt     8 <hvc_dcc_put_chars+0x8>
  30:   e1a00002        mov     r0, r2
  34:   e12fff1e        bx      lr

which looks better and actually works. Mark all the inline
assembly in this file as volatile since we don't want the
compiler to optimize away these statements or move them around
in any way.

Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 16:05:43 -08:00
Amit Shah 51df0acc3d virtio: console: Move file back to drivers/char/
Commit 728674a7e4 moved virtio_console.c
to drivers/tty/hvc/ under the perception of this being an hvc driver.
It was such once, but these days it has generic communication
capabilities as well, so move it to drivers/char/.

In the future, the hvc part from this file can be split off and moved
under drivers/tty/hvc/.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 14:43:12 -08:00
Greg Kroah-Hartman 728674a7e4 tty: move hvc drivers to drivers/tty/hvc/
As requested by Arnd Bergmann, the hvc drivers are now
moved to the drivers/tty/hvc/ directory.  The virtio_console.c driver
was also moved, as it required the hvc_console.h file to be able to be
built, and it really is a hvc driver.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-13 12:03:00 -08:00