Suddenly everyone shows up with their trivial patch series!
- piles of if (!ptr) check removals from Markus Elfring
- more of_node_put fixes from Peter Chen
- make fbdev support really optional in all drivers (except vmwgfx),
somehow this fell through the cracks when we did all the hard prep work
a while ago. Patches from Tobias Jakobi.
- leftover patches for the connector reg/unreg cleanup (required that I
backmerged drm-next) from Chris
- last vgem fence patch from Chris
- fix up warnings in the new sphinx gpu docs build
- misc other small bits
* tag 'topic/drm-misc-2016-07-22' of git://anongit.freedesktop.org/drm-intel: (57 commits)
GPU-DRM-Exynos: Delete an unnecessary check before the function call "vunmap"
GPU-DRM-sun4i: Delete an unnecessary check before drm_fbdev_cma_hotplug_event()
drm/atomic: Delete an unnecessary check before drm_property_unreference_blob()
drm/rockchip: analogix_dp: add missing clk_disable_unprepare() on error
drm: drm_connector->s/connector_id/index/ for consistency
drm/virtio: Fix non static symbol warning
drm/arc: Remove redundant dev_err call in arcpgu_load()
drm/arc: Fix some sparse warnings
drm/vgem: Fix non static symbol warning
drm/doc: Spinx leftovers
drm/dp-mst: Missing kernel doc
drm/dp-mst: Remove tx_down_in_progress
drm/doc: Fix missing kerneldoc for drm_dp_helper.c
drm: Extract&Document drm_irq.h
drm/doc: document all the properties in drm_mode_config
drm/drm-kms.rst: Remove unused drm_fourcc.h include directive
drm/doc: Add kerneldoc for @index
drm: Unexport drm_connector_unregister_all()
drm/sun4i: Remove redundant call to drm_connector_unregister_all()
drm/ttm: Delete an unnecessary check before the function call "ttm_tt_destroy"
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXlRXSAAoJEHm+PkMAQRiGG/gH/0Z8O4zWOsrwO+X1mRToRDBH
joFOjAmCVe83T1VpF5LYNB+9+owL/dEDt6+ZIswnhH7AfQPjs4RqwS4PcuMbCDVO
+mDm0PmfcKaYcQZrB2Z2OwIzRNnfCTVcsDPhIHwuIHk0m4z/xuGZonD8KoAj0+tO
3yJF6sbE1KubDVjOb+lmZZSP3cXA0pDXrNhkYhE4Tsr8fiihGjeXSNJ8t2zPLjxo
W3MPqo0rzDvQsOwoF4TWHHagVaFSJlhLBBgqu33fI7uO3jtfQD2G8wG68JCND1j3
qbMoBfTLFV/yQmSIJUt0Wv1axaCcwnjpweEB35A/GEeZ0mNB1rDdoBeI1eKEQkc=
=DGFC
-----END PGP SIGNATURE-----
Backmerge tag 'v4.7' into drm-next
Linux 4.7
As requested by Daniel Vetter as the conflicts were getting messy.
The drm_fbdev_cma_hotplug_event() function tests whether its argument
is NULL and then returns immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/cd959d92-f7d9-598c-421f-d3f40bedee10@users.sourceforge.net
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcHi9AAoJEHm+PkMAQRiGSJ0H/2o4t9VWYmhyPC1sdIHoCExJ
P4tBrcZYBmKcsOmIfnJDa5g/+IdhouEUM0v0fHPogS2UUWT9eRuJWYD3sY+HpEQ+
heKTli8X73gsFB25odeIbIt0jAoSiiMYWDrWqLNsuUV1tjEYVA8rH0SM94FiOC/5
7WVWXLTuH+Rm7JHP18BnKxmMMbzrTFmwisLMqFKyfZRRSlS+/ix7iLUNO9AFa39B
YHxNPihLrZ0oONyCOAQoHTIXXrw0cQbxV2utg3vnMcCZdme2xOn+iXMntTSKfZ39
iC9/T0vsO3R6OrRo2aDZAnCPUAniXnMEIhrKG37WMyXpj6cucZ/2QiNXcXviGV4=
=iLte
-----END PGP SIGNATURE-----
Back-merge tag 'v4.7-rc5' into drm-next
Linux 4.7-rc5
The fsl-dcu pull needs -rc3 so go to -rc5 for now.
So far, we were missing to send the vblank event when disabling the CRTC,
making us never report the last vblank event.
This was causing a time out on the page flip, which should be solved now.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The sun4i display engine doesn't have any vblank counter. Use the proper
helper for that.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Since
commit e112e593b2
Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Date: Fri Dec 11 11:20:28 2015 +0100
drm: use dev_name as default unique name in drm_dev_alloc()
we're using a reasonable default which should work for everyone. Only
mtk, rcar-du and sun4i are affected, and as kms-only drivers without
any rendering support no one should ever care about the unique name
v2: Rebase on top of mediatek.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-5-git-send-email-daniel.vetter@ffwll.ch
All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations and let the core call
drm_atomic_helper_best_encoder() for us.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-13-git-send-email-boris.brezillon@free-electrons.com
atomic_flush seems to be the right place, right after we commit the
plane updates. Again use the fullproof version, since the pipe might
be off.
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-6-git-send-email-daniel.vetter@ffwll.ch
sun4i_rgb_init() can fail, which results in TCON failing to bind.
In this case we need to do cleanup, specificly unregistering the
dotclock, which is regmap based, and the regmap is registered as
part of the sun4i_tcon_bind().
Failing to do so results in a NULL pointer reference when the CCF
tries to turn off unused clocks.
Fixes: 29e57fab97 ("drm: sun4i: Add RGB output")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
If simplefb was setup by our bootloader and enabled in the DT, we will have
a first framebuffer loaded in our system.
However, as soon as our DRM driver will load, it will reset the controller,
initialise it and, if the framebuffer emulation is enabled, register a
second framebuffer device.
This is obviously pretty bad, since the first framebuffer will be some kind
of a black hole, with memory still reserved that we can write to safely,
but not displayed anywhere.
Make sure we remove that framebuffer when we probe so we don't end up in
that situation.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
In case of an error, our pointer to the drm_panel structure attached to our
encoder will hold an error pointer, not a NULL pointer.
Make sure we check the right thing.
Fixes: 29e57fab97 ("drm: sun4i: Add RGB output")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Our code currently defers our probe on any error, even if we were not
expecting to have one at all.
Make sure we return -EPROBE_DEFER only when we were supposed to have a
panel, but it's not probed yet.
Also fix a typo while we're at it.
Fixes: 29e57fab97 ("drm: sun4i: Add RGB output")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Our pixel clock cannot reach a high enough rate for some rather high while
common resolutions (like 1080p60).
Make sure we filter the resolutions we cannot reach in our mode_valid
function.
Fixes: 29e57fab97 ("drm: sun4i: Add RGB output")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Our pixel clock currently only tries to deal with the current parent rate.
While that works when the resolution is the same than the one already
program, or when we can compute directly the rate from the current parent
rate, it cannot work in most situation when we want to change the
frequency, and we end up with an improper pixel clock rate, which obviously
doesn't work as expected.
Ask our parent for all the possible dividers if it can reach that
frequency, and return the best parent rate to the clock framework so that
we can use it.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
gcc points out a possible uninitialized variable use in
sun4i_dclk_create():
drivers/gpu/drm/sun4i/sun4i_dotclock.c: In function 'sun4i_dclk_create':
drivers/gpu/drm/sun4i/sun4i_dotclock.c:139:12: error: 'clk_name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
init.name = clk_name;
The warning only shows up when CONFIG_OF is disabled, and the
property is never filled, but the same bug can show up even
when CONFIG_OF is enabled but of_property_read_string_index
returns another error.
To fix it, this ensures that sun4i_dclk_create propagates
any error from of_property_read_string_index.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The newly added sun4i drm driver prints a dma address using the %x
format string, which cannot work when dma_addr_t is 64 bit,
and gcc warns about this configuration:
drm/sun4i/sun4i_backend.c: In function 'sun4i_backend_update_layer_buffer':
drm/sun4i/sun4i_backend.c:193:84: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=]
DRM_DEBUG_DRIVER("Using GEM @ 0x%x\n", gem->paddr);
drm/sun4i/sun4i_backend.c:201:84: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=]
DRM_DEBUG_DRIVER("Setting buffer address to 0x%x\n", paddr);
This changes the code to use the explicit %pad format string, which
always prints the right length.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The sun4i drm driver uses the clk-provider interfaces, which are not available
when CONFIG_COMMON_CLK is disabled:
drivers/gpu/drm/sun4i/sun4i_dotclock.c:19:16: error: field 'hw' has incomplete type
struct clk_hw hw;
In file included from ../include/asm-generic/bug.h:13:0,
from ../arch/arm/include/asm/bug.h:59,
from ../include/linux/bug.h:4,
from ../include/linux/io.h:23,
from ../include/linux/clk-provider.h:14,
from ../drivers/gpu/drm/sun4i/sun4i_dotclock.c:13:
drivers/gpu/drm/sun4i/sun4i_dotclock.c: In function 'hw_to_dclk':
include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
...
This adds a Kconfig dependency to prevent the driver from being enabled
in this case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add the settings to support the NTSC standard.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that we have support for the composite output, we can start adding new
supported standards. Start with PAL, and we will add other eventually.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Some Allwinner SoCs have an IP called the TV encoder that is used to output
composite and VGA signals. In such a case, we need to use the second TCON
channel.
Add support for that TV encoder.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
One of the A10 display pipeline possible output is an RGB interface to
drive LCD panels directly. This is done through the first channel of the
TCON that will output our video signals directly.
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.
Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Dave Airlie
Markus Elfring
Chris Wilson
Peter Chen
Maxime Ripard
Daniel Vetter
Boris Brezillon
Chen-Yu Tsai
Arnd Bergmann