Commit Graph

820 Commits

Author SHA1 Message Date
Linus Torvalds 132d68d37d USB/PHY patches for 5.2-rc1
Here is the big set of USB and PHY driver patches for 5.2-rc1
 
 There is the usual set of:
 	- USB gadget updates
 	- PHY driver updates and additions
 	- USB serial driver updates and fixes
 	- typec updates and new chips supported
 	- mtu3 driver updates
 	- xhci driver updates
 	- other tiny driver updates
 
 Nothing really interesting, just constant forward progress.
 
 All of these have been in linux-next for a while with no reported
 issues.  The usb-gadget and usb-serial trees were merged a bit "late",
 but both of them had been in linux-next before they got merged here last
 Friday.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNKuwg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymRUgCfa8Ri7KrCaBR5NHQcLhbdrX90ToQAmgNw7vpo
 fqt0XpNM0CSa9O/gOr79
 =8HFh
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 5.2-rc1

  There is the usual set of:

   - USB gadget updates

   - PHY driver updates and additions

   - USB serial driver updates and fixes

   - typec updates and new chips supported

   - mtu3 driver updates

   - xhci driver updates

   - other tiny driver updates

  Nothing really interesting, just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues. The usb-gadget and usb-serial trees were merged a bit "late",
  but both of them had been in linux-next before they got merged here
  last Friday"

* tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits)
  USB: serial: f81232: implement break control
  USB: serial: f81232: add high baud rate support
  USB: serial: f81232: clear overrun flag
  USB: serial: f81232: fix interrupt worker not stop
  usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
  usb: dwc3: Fix default lpm_nyet_threshold value
  usb: dwc3: debug: Print GET_STATUS(device) tracepoint
  usb: dwc3: Do core validation early on probe
  usb: dwc3: gadget: Set lpm_capable
  usb: gadget: atmel: tie wake lock to running clock
  usb: gadget: atmel: support USB suspend
  usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
  dwc2: gadget: Fix completed transfer size calculation in DDMA
  usb: dwc2: Set lpm mode parameters depend on HW configuration
  usb: dwc2: Fix channel disable flow
  usb: dwc2: Set actual frame number for completed ISOC transfer
  usb: gadget: do not use __constant_cpu_to_le16
  usb: dwc2: gadget: Increase descriptors count for ISOC's
  usb: introduce usb_ep_type_string() function
  usb: dwc3: move synchronize_irq() out of the spinlock protected block
  ...
2019-05-08 10:03:52 -07:00
Greg Kroah-Hartman e434a90f36 phy: for 5.1-rc
*) Fix sun4i-usb PHY driver to get USB gadget working on H3/R40/V3/V3s
   *) Fix cable state handling in phy-twl4030-usb driver to get rid of
      regulator_put() warning
   *) Fix linker errors and compilation warnings got with randconfig
   *) Fix sparse warnings and .cocci warnings
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEEUXMr/TfP2p4suIY5Dlx4XIBNgtkFAly3IE0OHGtpc2hvbkB0
 aS5jb20ACgkQDlx4XIBNgtlLdw//chLd7p15v9DZygo6QEaapO9aUogBZFeUmpJ8
 9HuXiEeJxxqFemX+uplJ20yFWkJ2KgNG6bJltHPLDA6pUgv2xbGn5kNvAmxdaOSG
 Sp8GIp2W1NQQwbCna1b+uLFFLd87aBu9nVcias2Kg3+TeCEyLzJvBWveluxthDSV
 +3YlT7KwiDLm4iJx67PvyvGan5BhfJz4rCSYjOprv/BzS5vTF6ax4iyWh/cy2ABH
 F53mvpAVJPNw3c+w6lj+Hwks4ZQ0LqebautwW8mBBJ9Dbb592qDNEY8QwaCcQLXn
 suRdRHuuN8BrTYWfQed4YA+npcWf8fqHAQyxP8BiQtMwvoKFJGXjF7oHS7vD4zWT
 9hWfP9F9/Qm90nrhssVEvAaClMb+3w8PrtUQouO6n+p+yZCq85PMZTfZNR6iHF5q
 q3dEvuZy6QxnMSsmO4WFXSihK/c10NMRbG6+SlXDxHPVw3U+/elXeQOuU+ah/xMn
 8/amZbEy3l+J0CjN5QwmECRmp9Y4UprW1WQRZrnmaNHc2PrqlNprCC8XNzuvuuCH
 tlJ8iY0juMyzei8xjKFt1Q8xjkZXXfhCD45z0+JlsAsxmqvwvNkVU8k9zBQyOYik
 jSyTO98wL0gqvJF6KTbLJYl/lRxstdKXM4vQa3MotPm8kTURGNtUR2ZOoAiIbjCO
 Cv5PrTE=
 =NbOP
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-5.1-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into char-misc-next

Kishon writes:

phy: for 5.1-rc

  *) Fix sun4i-usb PHY driver to get USB gadget working on H3/R40/V3/V3s
  *) Fix cable state handling in phy-twl4030-usb driver to get rid of
     regulator_put() warning
  *) Fix linker errors and compilation warnings got with randconfig
  *) Fix sparse warnings and .cocci warnings

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.1-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy:
  phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode
  phy: fix platform_no_drv_owner.cocci warnings
  phy: mapphone-mdm6600: add gpiolib dependency
  phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
  phy: allwinner: allow compile testing
  phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
  phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
  phy: phy-twl4030-usb: Fix cable state handling
2019-04-25 11:27:48 +02:00
Greg Kroah-Hartman d30e413fa4 phy: for 5.2
*) Add a new *release* phy_ops invoked when the consumer relinquishes PHY
      that can be used to undo the operation performed in xlate
   *) Add new driver to support USB2 PHY and shared USB3 + PCIE PHY in Amlogic
      G12A SoC Family.
   *) Add new driver to support for Broadcom's Stingray USB PHY (Type 1 has
      one super speed PHY and one high speed PHY, Type 2 has one high speed PHY)
   *) Add new driver to support USB PHY in hi3660 SoC of Hisilicon
   *) Add new driver to support UFS M-PHY in MediaTek SoC
   *) Add new driver to support XUSB pad controller in Tegra186 SoCs
   *) Add new driver to support SERDES in TI's AM654 platform
   *) Add support for generation 2 USB2 PHY and gneration 3 USB2 PHY in r8a77470
      to phy-rcar-gen2.c and phy-rcar-gen3-usb2.c respectively
   *) Add support for PCIe QMP PHY support in msm8998 to phy-qcom-qmp.c
   *) Add support for SERDES6G in phy-ocelot-serdes.c
   *) Add support to set drive impedance from device tree in phy-rockchip-emmc.c
   *) Add support to power up/down the VBUS voltage rail in phy-fsl-imx8mq-usb.c
   *) Add support to shut off regulators that power UFS during system suspend
   *) Re-design phy-rcar-gen3-usb2.c to create separate PHY instances for each
      channel which helps to enable/disable interrupts for each instance
      independently
   *) Fix PCIe power up sequence to follow the TRM in order to ensure the DPLL &
      PHY operates correctly over the entire temperature range.
   *) Use devm_clk_get_optional to get optional clocks instead of adding
      custom error checks
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEEUXMr/TfP2p4suIY5Dlx4XIBNgtkFAly+xBgOHGtpc2hvbkB0
 aS5jb20ACgkQDlx4XIBNgtn4QQ/+LwamWUGecuhxeq2P7FmXPwIaRnboRKkqGsuv
 /sQI1QWWx1R8iAhbqtefpmaCfRnMnZwBkwQG71NU8GMHUylz+WhgrD6NW5fkBTS+
 CM7GGEtyPyyZYYmR0A7CQbdvOlOD5huNWXXFwleXGfZj0AfehFI5GBebWXd36Pzf
 g26+q9TZEkTiHuJP/1Xqm87PVpdOpEJLpctfYome1TRBiM5U/63QXOfuFO1LcD3F
 VdKU/Ls6dWbZElGQynDQpYtQK7YgyjOrrK2dWKCxzLC90IDPGQmbq+hTDzC30YsM
 6ePxeoIp3ojla3HGML2uJE9LdQQHsiz6+m64+K3+3uG9Mls04vU2Cp817vFKRkry
 WNz8obkMzf8h6/smtWTpTXADuFf+sMXJW3d77TxjdwfsnzqjwH3kgVv4HACHtYDf
 dv89aA3V+z+oW67MqFBydFq7FDOFF9emlGB/ACiWHor98InAM0N/qTFW91NAWNdo
 HhZHiJd6Vv4ik+V4ajHYcHdfFeXawmsRQNsfNRlABTM0sXFwCvAiPUUU0CaYferd
 FBrRZilO9XxZf6ybGPvAJiycvtJ3qUJuSVdyOLXckOxpN2L0Zb9CTOrbYDuLuOeE
 tI81IPkzv0yaHbe0XCssd1aIbhgnoWOM+keLD0rh9+mCWDR6zyD1Kw7WRAfNu2PS
 HtTZTso=
 =BAzr
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 5.2

  *) Add a new *release* phy_ops invoked when the consumer relinquishes PHY
     that can be used to undo the operation performed in xlate
  *) Add new driver to support USB2 PHY and shared USB3 + PCIE PHY in Amlogic
     G12A SoC Family.
  *) Add new driver to support for Broadcom's Stingray USB PHY (Type 1 has
     one super speed PHY and one high speed PHY, Type 2 has one high speed PHY)
  *) Add new driver to support USB PHY in hi3660 SoC of Hisilicon
  *) Add new driver to support UFS M-PHY in MediaTek SoC
  *) Add new driver to support XUSB pad controller in Tegra186 SoCs
  *) Add new driver to support SERDES in TI's AM654 platform
  *) Add support for generation 2 USB2 PHY and gneration 3 USB2 PHY in r8a77470
     to phy-rcar-gen2.c and phy-rcar-gen3-usb2.c respectively
  *) Add support for PCIe QMP PHY support in msm8998 to phy-qcom-qmp.c
  *) Add support for SERDES6G in phy-ocelot-serdes.c
  *) Add support to set drive impedance from device tree in phy-rockchip-emmc.c
  *) Add support to power up/down the VBUS voltage rail in phy-fsl-imx8mq-usb.c
  *) Add support to shut off regulators that power UFS during system suspend
  *) Re-design phy-rcar-gen3-usb2.c to create separate PHY instances for each
     channel which helps to enable/disable interrupts for each instance
     independently
  *) Fix PCIe power up sequence to follow the TRM in order to ensure the DPLL &
     PHY operates correctly over the entire temperature range.
  *) Use devm_clk_get_optional to get optional clocks instead of adding
     custom error checks

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (51 commits)
  dt-bindings: phy-qcom-qmp: Tweak qcom,msm8998-qmp-ufs-phy
  dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-pcie-phy
  phy: Add usb phy support for hi3660 Soc of Hisilicon
  dt-bindings: phy: Add support for HiSilicon's hi3660 USB PHY
  scsi: phy: mediatek: fix typo in author's email address
  phy: ocelot-serdes: Add support for SERDES6G muxing
  phy: fsl-imx8mq-usb: add support for VBUS power control
  dt-bindings: phy-imx8mq-usb: add optional vbus supply regulator
  phy: qcom-qmp: Add msm8998 PCIe QMP PHY support
  phy: ti: am654-serdes: Support all clksel values
  phy: ti: Add a new SERDES driver for TI's AM654x SoC
  dt-bindings: phy: ti: Add dt binding documentation for SERDES in AM654x SoC
  phy: core: Invoke pm_runtime_get_*/pm_runtime_put_* before invoking reset callback
  phy: core: Add *release* phy_ops invoked when the consumer relinquishes PHY
  phy: phy-meson-gxl-usb2: get optional clock by devm_clk_get_optional()
  phy: socionext: get optional clock by devm_clk_get_optional()
  phy: qcom-qusb2: get optional clock by devm_clk_get_optional()
  phy: phy-mtk-tphy: get optional clock by devm_clk_get_optional()
  phy: renesas: rcar-gen3-usb2: enable/disable independent irqs
  phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg()
  ...
2019-04-25 10:49:34 +02:00
Yu Chen 94e487a41f phy: Add usb phy support for hi3660 Soc of Hisilicon
This driver handles usb phy power on and shutdown for hi3660 Soc of
Hisilicon.

Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Pengcheng Li <lpc.li@hisilicon.com>
Cc: Jianguo Sun <sunjianguo1@huawei.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Jiancheng Xue <xuejiancheng@hisilicon.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-18 22:08:25 +05:30
Colin Ian King ea4059fc93 scsi: phy: mediatek: fix typo in author's email address
There is a typo in the module author's email address. Fix this.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-18 22:08:25 +05:30
Kavya Sree Kotagiri 61c67bfaaa phy: ocelot-serdes: Add support for SERDES6G muxing
Adding support for SERDES6G muxing required for QSGMII mode of operation.

Signed-off-by: Kavya Sree Kotagiri <kavyasree.kotagiri@microchip.com>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Co-developed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Co-developed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-18 22:08:25 +05:30
Lucas Stach eeda879bb5 phy: fsl-imx8mq-usb: add support for VBUS power control
This adds support to the PHY driver to power up/down the VBUS
voltage rail at the appropriate times.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-18 22:08:25 +05:30
Marc Gonzalez 73d7ec899b phy: qcom-qmp: Add msm8998 PCIe QMP PHY support
Documentation for this PHY, and the proper configuration settings,
is *not* publicly available. Therefore the initialization sequence
is copied wholesale from downstream:

https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/msm8998-v2.dtsi?h=LE.UM.1.3.r3.25#n372

Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:20 +05:30
Roger Quadros 7e7b8ca661 phy: ti: am654-serdes: Support all clksel values
Add support to select all 16 CLKSEL combinations that are shown in
"SerDes Reference Clock Distribution" in AM65 TRM.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:20 +05:30
Kishon Vijay Abraham I 71e2f5c5c2 phy: ti: Add a new SERDES driver for TI's AM654x SoC
Add a new SERDES driver for TI's AM654x SoC which configures
the SERDES only for PCIe. Support fo USB3 will be added later.

SERDES in am654x has three input clocks (left input, externel reference
clock and right input) and two output clocks (left output and right
output) in addition to a PLL mux clock which the SERDES uses for Clock
Multiplier Unit (CMU refclock).

The PLL mux clock can select from one of the three input clocks.
The right output can select between left input and external reference
clock while the left output can select between the right input and
external reference clock.

The driver has support to select PLL mux and left/right output mux as
specified in device tree.

[rogerq@ti.com: Fix boot lockup caused by accessing a structure member
(hw->init) allocated in stack of probe() and accessed in get_parent]
[rogerq@ti.com: Fix "Failed to find the parent" warnings]
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:19 +05:30
Kishon Vijay Abraham I 4df614c4ab phy: core: Invoke pm_runtime_get_*/pm_runtime_put_* before invoking reset callback
PHY drivers may try to access PHY registers in the ->reset() callback.
Invoke phy_pm_runtime_get_sync() before invoking the ->reset() callback
so that the PHY drivers don't have to enable clocks by themselves before
accessing PHY registers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:17 +05:30
Kishon Vijay Abraham I fec06b2bc4 phy: core: Add *release* phy_ops invoked when the consumer relinquishes PHY
Add a new phy_ops *release* invoked when the consumer relinquishes the
PHY using phy_put/devm_phy_put. The initializations done by the PHY
driver in of_xlate call back can be can be cleaned up here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:17 +05:30
Chunfeng Yun 42c7cb71b5 phy: phy-meson-gxl-usb2: get optional clock by devm_clk_get_optional()
Use devm_clk_get_optional() to get optional clock

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:16 +05:30
Chunfeng Yun 752d31a3e1 phy: socionext: get optional clock by devm_clk_get_optional()
Use devm_clk_get_optional() to get optional clock

Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:15 +05:30
Chunfeng Yun 1039596c90 phy: qcom-qusb2: get optional clock by devm_clk_get_optional()
Use devm_clk_get_optional() to get optional clock

Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:14 +05:30
Chunfeng Yun b603c500d7 phy: phy-mtk-tphy: get optional clock by devm_clk_get_optional()
Use devm_clk_get_optional() to get optional clock

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:14 +05:30
Yoshihiro Shimoda 549b6b55b0 phy: renesas: rcar-gen3-usb2: enable/disable independent irqs
Since the previous code enabled/disabled the irqs both OHCI and EHCI,
it is possible to cause unexpected interruptions. To avoid this,
this patch creates multiple phy instances from phandle and
enables/disables independent irqs by the instances.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:14 +05:30
Yoshihiro Shimoda 92fec1c27c phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg()
To implement multiple phy instances in the future, this patch uses
pdev's device pointer on dev_vdbg() instead of the phy's device
pointer.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:13 +05:30
Biju Das 5d8042e95f phy: rcar-gen3-usb2: Add support for r8a77470
This patch adds support for r8a77470 (RZ/G1C). We can reuse this driver for
initializing timing/interrupt generation registers.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:11 +05:30
Biju Das b7187e001a phy: renesas: phy-rcar-gen2: Add support for r8a77470
This patch adds support for RZ/G1C (r8a77470) SoC. RZ/G1C SoC has a
PLL register shared between hsusb0 and hsusb1. Compared to other RZ/G1
and R-Car Gen2/3, USB Host needs to deassert the pll reset.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-and-Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:10 +05:30
Roger Quadros 1d1bae7250 phy: ti-pipe3: Fix PCIe power up sequence
TRM [1] mentions that we need to power up
PCIESS_PHY_TX and PCIESS_PHY_RX before configuring
PCIe_PHY_RX SCP settings.

See "Table 26-81. PCIePHY Subsystem Low-Level Programming Sequence".

[1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:07 +05:30
Roger Quadros 9d009d9c20 phy: ti-pipe3: Fix SATA & USB PHY power up sequence
As per "Table 26-7. SATA PHY Subsystem Low-Level Programming Sequence"
in TRM [1] we need to turn on SATA_PHY_TX before SATA_PHY_RX.

[1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:07 +05:30
Roger Quadros fdef2f9f70 phy: ti-pipe3: improve DPLL stability for SATA & USB
For increased DPLL stability use the settings recommended in
the TRM [1] for PHY_RX registers for SATA and USB.

For SATA we need to use spread spectrum settings even
though we don't have spread spectrum enabled. The
suggested non-spread spectrum settings don't work.

[1] DRA75x, DRA74x TRM - http://www.ti.com/lit/ug/sprui30f/sprui30f.pdf

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:05 +05:30
Roger Quadros 22940823f0 phy: ti-pipe3: Introduce mode property in driver data
Introduce a mode property in the driver data so that
we don't have to keep using "of_device_is_compatible()"
throughtout the driver.

No functional change.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:03 +05:30
Colin Ian King e6577cb510 phy: ti-pipe3: fix missing bit-wise or operator when assigning val
There seems to be a missing bit-wise or operator when setting val,
fix this by adding it in.

Fixes: 2796ceb0c1 ("phy: ti-pipe3: Update pcie phy settings")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:03 +05:30
Stanley Chu 54be9c1a03 phy: mediatek: Add UFS M-PHY driver
Add UFS M-PHY driver on MediaTek chipsets.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:13:01 +05:30
Christoph Muellner 043f42edbf phy: rockchip-emmc: Allow to set drive impedance via DTS.
The rockchip-emmc PHY can be configured with different
drive impedance values. Currenlty a value of 50 Ohm is
hard coded into the driver.

This patch introduces the DTS property 'drive-impedance-ohm'
for the rockchip-emmc phy node, which uses the value from the DTS
to setup the drive impedance accordingly.

Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:58 +05:30
Evan Green 3f6d1767b1 phy: ufs-qcom: Refactor all init steps into phy_poweron
The phy code was using implicit sequencing between the PHY driver
and the UFS driver to implement certain hardware requirements.
Specifically, the PHY reset register in the UFS controller needs
to be deasserted before serdes start occurs in the PHY.

Before this change, the code was doing this by utilizing the two
phy callbacks, phy_init() and phy_poweron(), as "init step 1" and
"init step 2", where the UFS driver would deassert reset between
these two steps.

This makes it challenging to power off the regulators in suspend,
as regulators are initialized in init, not in poweron(), but only
poweroff() is called during suspend, not exit().

For UFS, move the actual firing up of the PHY to phy_poweron() and
phy_poweroff() callbacks, rather than init()/exit(). UFS calls
phy_poweroff() during suspend, so now all clocks and regulators for
the phy can be powered down during suspend.

QMP is a little tricky because the PHY is also shared with PCIe and
USB3, which have their own definitions for init() and poweron(). Rename
the meaty functions to _enable() and _disable() to disentangle from the
PHY core names, and then create two different ops structures: one for
UFS and one for the other PHY types.

In phy-qcom-ufs, remove the 'is_powered_on' and 'is_started' guards,
as the generic PHY code does the reference counting. The
14/20nm-specific init functions get collapsed into the generic power_on()
function, with the addition of a calibrate() callback specific to 14/20nm.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:57 +05:30
Evan Green c9b589791f phy: qcom: Utilize UFS reset controller
Move the PHY reset from ufs-qcom into the respective PHYs. This will
allow us to merge the two phases of UFS PHY initialization.

Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:56 +05:30
Neil Armstrong 36077e16c0 phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver
This adds support for the shared USB3 + PCIE PHY found in the
Amlogic G12A SoC Family.

It supports USB3 Host mode or PCIE 2.0 mode, depending on the layout of
the board.

Selection is done by the #phy-cells, making the mode static and exclusive.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:51 +05:30
Neil Armstrong 16df8bcb67 phy: amlogic: add Amlogic G12A USB2 PHY Driver
This adds support for the USB2 PHY found in the Amlogic G12A SoC Family.

It supports Host and/or Peripheral mode, depending on it's position.
The first PHY is only used as Host, but the second supports Dual modes
defined by the USB Control Glue HW in front of the USB Controllers.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:50 +05:30
Srinath Mannam 4dcddbb38b phy: sr-usb: Add Stingray USB PHY driver
USB PHY driver supports two types of stingray USB PHYs
 - Type 1 is a combo PHY contains two PHYs, one SS and one HS.
 - Type 2 is a single HS PHY.

These two PHY versons support both Generic xHCI host controller driver
and BDC Broadcom device controller driver.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:48 +05:30
JC Kuo bbf711682c phy: tegra: xusb: Add Tegra186 support
Add support for the XUSB pad controller found on Tegra186 SoCs. It is
mostly similar to the same IP found on earlier chips, but the number of
pads exposed differs, as do the programming sequences.

Note that the DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL power
supplies of the XUSB pad controller require strict power sequencing and
are therefore controlled by the PMIC on Tegra186.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
[dan.carpenter@oracle.com: Fix testing the wrong variable in probe()]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[yuehaibing@huawei.com: Make two functions static to fix sparse warning]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:47 +05:30
Thierry Reding a630d54dfa phy: tegra: xusb: Add support for power supplies
Support enabling various supplies needed to provide power to the PLLs
and logic used to drive the USB, PCI and SATA pads.

Reviewed-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:45 +05:30
Thierry Reding 5311a7b895 phy: tegra: xusb: Parse dual-role mode property
The device tree bindings document the "mode" property of "ports"
subnodes, but the driver was not parsing the property. In preparation
for adding role switching, parse the property at probe time.

Based on work by JC Kuo <jckuo@nvidia.com>.

Reviewed-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:43 +05:30
JC Kuo 3cffa0818d phy: tegra: xusb: Skip single function lane programming
Tegra186 USB2 pads and USB3 pads do not have hardware mux for changing
the pad function. For such "lanes", we can skip the lane mux register
programming.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 14:12:43 +05:30
Paul Kocialkowski e6f32efb1b phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode
On platforms where the MUSB and HCI controllers share PHY0, PHY passby
is required when using the HCI controller with the PHY, but it must be
disabled when the MUSB controller is used instead.

Without this, PHY0 passby is always enabled, which results in broken
peripheral mode on such platforms (e.g. H3/H5).

Fixes: ba4bdc9e1d ("PHY: sunxi: Add driver for sunxi usb phy")

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 12:06:02 +05:30
YueHaibing 9dc211c613 phy: fix platform_no_drv_owner.cocci warnings
Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 12:06:02 +05:30
Arnd Bergmann 208d3423ee phy: mapphone-mdm6600: add gpiolib dependency
gcc points out that when CONFIG_GPIOLIB is disabled,
gpiod_get_array_value_cansleep() returns 0 but fails to set its output:

drivers/phy/motorola/phy-mapphone-mdm6600.c: In function 'phy_mdm6600_status':
drivers/phy/motorola/phy-mapphone-mdm6600.c:220:24: error: 'values[0]' is used uninitialized in this function [-Werror=uninitialized]

This could be fixed more generally in gpiolib by returning a failure
code, but for this specific case, the easier workaround is to add a
gpiolib dependency.

Fixes: 5d1ebbda03 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 12:06:02 +05:30
Arnd Bergmann d41ce98a12 phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
With randconfig build testing on arm64, we can run into a configuration
that has CONFIG_OMAP_CONTROL_PHY=m and CONFIG_OMAP_USB2=y, which in turn
causes a link failure:

drivers/phy/ti/phy-omap-usb2.o: In function `omap_usb_phy_power':
phy-omap-usb2.c:(.text+0x17c): undefined reference to `omap_control_phy_power'

I could not come up with a good way to correctly describe the relation
of the two symbols, but if we just select CONFIG_OMAP_CONTROL_PHY
during compile testing, we can no longer run into the broken configuration.

Fixes: 6777cee3a8 ("phy: ti: usb2: Add support for AM654 USB2 PHY")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 12:06:02 +05:30
Arnd Bergmann e03213b9a6 phy: allwinner: allow compile testing
Some allwinner specific drivers can be built for testing purposes
on non-sunxi configurations, which then results in a harmless
warning:

WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY
  Depends on [n]: ARCH_SUNXI [=n] && HAS_IOMEM [=y] && OF [=y] && RESET_CONTROLLER [=y]
  Selected by [y]:
  - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y]

Allow compile-test here as well to avoid the warning, and improve
overall build coverage.

Fixes: 5d134abf95 ("phy: Move Allwinner A31 D-PHY driver to drivers/phy/")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 12:06:02 +05:30
YueHaibing e0c546fa72 phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
Fix sparse warning:

drivers/phy/qualcomm/phy-qcom-ufs.c:462:6:
 warning: symbol 'ufs_qcom_phy_disable_iface_clk' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 10:29:49 +05:30
YueHaibing f7f6ed925d phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
Fix sparse warning:

drivers/phy/rockchip/phy-rockchip-typec.c:403:16: warning: symbol 'usb3_pll_cfg' was not declared. Should it be static?
drivers/phy/rockchip/phy-rockchip-typec.c:420:16: warning: symbol 'dp_pll_cfg' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 10:29:49 +05:30
Tony Lindgren 20f795881f phy: phy-twl4030-usb: Fix cable state handling
With the recent regulator changes I noticed new warnings on doing rmmod of
phy-twl4030-usb:

WARNING: CPU: 0 PID: 1080 at drivers/regulator/core.c:2046 _regulator_put
...

Turns out we can currently miss disconnect at least for cases where status
is 0 and linkstat is 0. And in that case doing rmmod phy-twl4030-usb will
produce the regulator_put() warning.

This is because the missed disconnect causes unbalanced PM runtime calls
and the regulators will be on exit.

Let's fix the issue by using an atomic flag for the cable state to make
sure that PM runtime won't get out of sync with the cable state. That
way we can also simplify the code a bit.

Note that we can also drop the old comments, those relate to issues that
the battery charger driver and musb driver is dealing with rather than
the USB PHY driver.

Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17 10:29:49 +05:30
Chen-Yu Tsai 1396929e8a phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
While only the first PHY supports mode switching, the remaining PHYs
work in USB host mode. They should support set_mode with mode=USB_HOST
instead of failing. This is especially needed now that the USB core does
set_mode for all USB ports, which was added in commit b97a313483 ("usb:
core: comply to PHY framework").

Make set_mode with mode=USB_HOST a no-op instead of failing for the
non-OTG USB PHYs.

Fixes: 6ba43c2919 ("phy-sun4i-usb: Add support for phy_set_mode")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26 16:48:55 +09:00
Linus Torvalds 851ca779d1 drm next pull request for 5.1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcfzdFAAoJEAx081l5xIa+QxsP/A6QP+gx4vQ8XXikaJMNz89e
 59TAbXHW/2qFMHRtUesuB2bc1a2cw2ppFsrryG7c4HqjKDDHna7Yx2JzZYL0MmNh
 SpJYL4yMuu/2TmyCouaAYzzP+5Supdosfif4LRn3269DH0i5MWXL+NVrbeB47blG
 XwjQTu46yfn06IFAo5bI2jMqSuPCDd4Hzpyixpvmjt+r16XwoH5nGUrDCHG8t/jV
 +PUZCYAjn71in6Z66MKZv/EVCVFfTnaVJ2KEgw7e+vWxnERkRh/xnRO6KIXMD5O1
 vo2qc2vbxkGpjaE6pDzC/2e5pRJT8Ks0t50jYjbVF+6nHpP5XIPvAXH4R2QdTA7B
 Jiu8N0oz6wj0H3AJ/V38rEHWW8zgOfXkhbRBfmfQ9NfgiEfwxqCVgspIOwei4oVw
 hvMXYUBM1CU+JIfW6w7ZT4oHALUlnCpnr5DQRdCNRm8zjClyNfIAoJIJrOtqmX44
 qjEzSgxb89ZtS7c0yislSBaovgAmcM3I+aq5I4xokdY0hFEZ6QomuKunyuQ8pBYa
 3gsvMEReLxETffhhYpjBt5+b5IgB49nf3Y38CKFurv32Sp0p0YgK0qVo8qRQHclj
 QIJ+3+zQMCX20swYpCWXhOPUIwtQppdKhWzg12my8rL2VgTlYhjlEbL4EL+Wk+hv
 6Ipulthzn0RyrSK9Dojh
 =GlRQ
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for the 5.1 merge window.

  The big changes I'd highlight are:
   - nouveau has HMM support now, there is finally an in-tree user so we
     can quieten down the rip it out people.
   - i915 now enables fastboot by default on Skylake+
   - Displayport Multistream support has been refactored and should
     hopefully be more reliable.

  Core:
   - header cleanups aiming towards removing drmP.h
   - dma-buf fence seqnos to 64-bits
   - common helper for DP mst hotplug for radeon,i915,amdgpu + new
     refcounting scheme
   - MST i2c improvements
   - drm_syncobj_cb removal
   - ARM FB compression fourcc
   - P010 + P016 fourcc
   - allwinner tiled format modifier
   - i2c over aux I2C_M_STOP support
   - DRM_AUTH handling fixes

  TTM:
   - ref/unref renaming

  New driver:
   - ARM komeda display driver

  scheduler:
   - refactor mirror list handling
   - rework hw fence processing
   - 0 run queue entity fix

  bridge:
   - TI DS90C185 LVDS bridge
   - thc631lvdm83d bridge improvements
   - cadence + allwinner DSI ported to generic phy

  panels:
   - Sitronix ST7701 panel
   - Kingdisplay KD097D04
   - LeMaker BL035-RGB-002
   - PDA 91-00156-A0
   - Innolux EE101IA-01D

  i915:
   - Enable fastboot by default on SKL+/VLV/CHV
   - Export RPCS configuration for ICL media driver
   - Coffelake PCI ID
   - CNL clocks setup fixes
   - ACPI/PMIC support for MIPI/DSI
   - Per-engine WA init for all engines
   - Shrinker locking fixes
   - Kerneldoc updates
   - Lots of ring improvements and reset fixes
   - Coffeelake GVT Support
   - VFIO GVT EDID Region support
   - runtime PM wakeref tracking
   - ILK->IVB primary plane enable delays
   - userptr mutex locking fixes
   - DSI fixes
   - LVDS/TV cleanups
   - HW readout fixes
   - LUT robustness fixes
   - ICL display and watermark fixes
   - gem mmap race fix

  amdgpu:
   - add scheduled dependencies interface
   - DCC on scanout surfaces
   - vega10/20 BACO support
   - Multiple IH rings on soc15
   - XGMI locking fixes
   - DC i2c/aux cleanups
   - runtime SMU debug interface
   - Kexec improvmeents
   - SR-IOV fixes
   - DC freesync + ABM fixes
   - GDS fixes
   - GPUVM fixes
   - vega20 PCIE DPM switching fixes
   - Context priority handling fixes

  radeon:
   - fix missing break in evergreen parser

  nouveau:
   - SVM support via HMM

  msm:
   - QCOM Compressed modifier support

  exynos:
   - s5pv210 rotator support

  imx:
   - zpos property support
   - pending update fixes

  v3d:
   - cache flush improvments

  vc4:
   - reflection support
   - HDMI overscan support

  tegra:
   - CEC refactoring
   - HDMI audio fixes
   - Tegra186 prep work
   - SOR crossbar device tree fixes

  sun4i:
   - implicit fencing support
   - YUV and scalar support improvements
   - A23 support
   - tiling fixes

  atmel-hlcdc:
   - clipping and rotation property fixes

  qxl:
   - BO and PRIME improvements
   - generic fbdev emulation

  dw-hdmi:
   - HDMI 2.0 2160p
   - YUV420 ouput

  rockchip:
   - implicit fencing support
   - reflection proerties

  virtio-gpu:
   - use generic fbdev emulation

  tilcdc:
   - cpufreq vs crtc init fix

  rcar-du:
   - R8A774C0 support
   - D3/E3 RGB output routing fixes and DPAD0 support
   - RA87744 LVDS support

  bochs:
   - atomic and generic fbdev emulation
   - ID mismatch error on bochs load

  meson:
   - remove firmware fbs"

* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
  drm/amd/display: Use vrr friendly pageflip throttling in DC.
  drm/imx: only send commit done event when all state has been applied
  drm/imx: allow building under COMPILE_TEST
  drm/imx: imx-tve: depend on COMMON_CLK
  drm/imx: ipuv3-plane: add zpos property
  drm/imx: ipuv3-plane: add function to query atomic update status
  gpu: ipu-v3: prg: add function to get channel configure status
  gpu: ipu-v3: pre: add double buffer status readback
  drm/amdgpu: Bump amdgpu version for context priority override.
  drm/amdgpu/powerplay: fix typo in BACO header guards
  drm/amdgpu/powerplay: fix return codes in BACO code
  drm/amdgpu: add missing license on baco files
  drm/bochs: Fix the ID mismatch error
  drm/nouveau/dmem: use dma addresses during migration copies
  drm/nouveau/dmem: use physical vram addresses during migration copies
  drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
  drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
  drm/nouveau/dmem: device memory helpers for SVM
  drm/nouveau/svm: initial support for shared virtual memory
  drm/nouveau: prepare for enabling svm with existing userspace interfaces
  ...
2019-03-08 08:23:15 -08:00
Linus Torvalds f90d64483e USB/PHY patches for 5.1-rc1
Here is the big USB/PHY driver pull request for 5.1-rc1.
 
 The usual set of gadget driver updates, phy driver updates (you will
 have a merge issue with Kconfig and Makefile), xhci updates, and typec
 additions.  Also included in here are a lot of small cleanups and fixes
 and driver updates where needed.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+hsw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynfNwCgqKKg+MxJ9pFjrwfWYOrbk+BBe2UAn2Elp4ia
 8FTdneQfN2J8Hhc6KGXE
 =Kx9I
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver pull request for 5.1-rc1.

  The usual set of gadget driver updates, phy driver updates, xhci
  updates, and typec additions. Also included in here are a lot of small
  cleanups and fixes and driver updates where needed.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  wusb: Remove unnecessary static function ckhdid_printf
  usb: core: make default autosuspend delay configurable
  usb: core: Fix typo in description of "authorized_default"
  usb: chipidea: Refactor USB PHY selection and keep a single PHY
  usb: chipidea: Grab the (legacy) USB PHY by phandle first
  usb: chipidea: imx: set power polarity
  dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
  usb: chipidea: imx: remove unused header files
  usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
  usb: core: add option of only authorizing internal devices
  usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
  usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
  usb: xhci: fix build warning - missing prototype
  usb: xhci: dbc: Fixing typo error.
  usb: xhci: remove unused member 'parent' in xhci_regset struct
  xhci: tegra: Prevent error pointer dereference
  USB: serial: option: add Telit ME910 ECM composition
  usb: core: Replace hardcoded check with inline function from usb.h
  usb: core: skip interfaces disabled in devicetree
  usb: typec: mux: remove redundant check on variable match
  ...
2019-03-06 16:48:27 -08:00
Dave Airlie c06de56121 Linux 5.0-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
 GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
 nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
 +t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
 kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
 o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
 BW9GgU8=
 =ZizU
 -----END PGP SIGNATURE-----

Merge v5.0-rc7 into drm-next

Backmerging for nouveau and imx that needed some fixes for next pulls.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-18 13:27:15 +10:00
Greg Kroah-Hartman 0220dcd113 phy: for 5.1
*) Add a new driver to support Armada 3700 COMPHY IP (supports SATA, USB3,
      PCIe)
   *) Add a new driver to support Armada UTMI PHY
   *) Add a new driver to support Cadence D-PHY
   *) Extend omap-usb2 PHY driver to be used for AM654 USB2 PHY
   *) Extend qcom-qmp PHY driver to be used for UFS PHY and USB3 PHY in Qualcomm
      MSM8998
   *) Extend qcom-qusb2 PHY driver to support QUSB2 PHY in Qualcomm MSM8998
   *) Remove module specific code that is present for drivers that can be only
      built-in
   *) Allow Freescale IMX8MQ USB to be used for multiple SoCs and not just
      i.MX8MQ
   *) Cleanups such as switch to SPDX identifier, use readl_poll_timeout macro,
      remove unused headers etc.,
 
 Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCgAsFiEEUXMr/TfP2p4suIY5Dlx4XIBNgtkFAlxiwzIOHGtpc2hvbkB0
 aS5jb20ACgkQDlx4XIBNgtnxAQ/+Lb12tqZImrTm5A+KIvk3Kaq47TC0dwsNbfg4
 Y8VWEAXP3Qicrc8uRxJDQdN2Jztf681kBOmTpa+RopwiaWTPQ/62MGTWOWIJHAoz
 LLXUo4FYF/bWDpszAh9CrVQVzZ6K6kq33fnLnJaYtYt0zyZS3pHnClApUgT+Ahz3
 2HW1M/XPKHJYyNH5N1lCqiGdOQM4aKYn9sy+AlxWN9XCWLKA1W9hxzF+wcIH7RAB
 VCixtug8PJ4D2XMyN6SzF99N4OWEmsoES3PC/28/kMs6JfwPUcFTCFYOhE1i+g0l
 rF1b7nvhxXpw6PYG4Ub/O/ltIyU+0ll2sFT3nm6gEbNPbl3FeDlDNXGQupMwHvB7
 N0DPVDZ9w0Xru6FzWQFcmW2PHbauCtTTYv6t+RxmdwtN4ituXwwxoO/xz4Ah1bTL
 Aqvt162uEWdCgqeW/nbq3b9MDITLnBbQ5pevsboaRj/GHXcF9K6D0oFsuWLb56KQ
 PzxulrPToBTWxbOyThA8CV1QI79re9Sd+05Niptg33vTAAw4Oh9+wKeqO8ZYPrvK
 gb2n5SEZIiZgcevA6M3Iy7GiWJ1Zg3p+uQxhBp39cKQsZbl6BtqXtOeG11wm2xOu
 g7D6vntoNMz+wj08/qemHgttrcJ5P8RA5k4PFZIMyCaJgK9Z5vTQH8zOfja4qefG
 LWC+U6Q=
 =wNhh
 -----END PGP SIGNATURE-----

Merge tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 5.1

  *) Add a new driver to support Armada 3700 COMPHY IP (supports SATA, USB3,
     PCIe)
  *) Add a new driver to support Armada UTMI PHY
  *) Add a new driver to support Cadence D-PHY
  *) Extend omap-usb2 PHY driver to be used for AM654 USB2 PHY
  *) Extend qcom-qmp PHY driver to be used for UFS PHY and USB3 PHY in Qualcomm
     MSM8998
  *) Extend qcom-qusb2 PHY driver to support QUSB2 PHY in Qualcomm MSM8998
  *) Remove module specific code that is present for drivers that can be only
     built-in
  *) Allow Freescale IMX8MQ USB to be used for multiple SoCs and not just
     i.MX8MQ
  *) Cleanups such as switch to SPDX identifier, use readl_poll_timeout macro,
     remove unused headers etc.,

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (32 commits)
  phy: qcom-qmp: Add QMP UFS PHY support for msm8998
  dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy
  phy: bcm-sr-pcie: Change operation when PIPEMUX=1
  phy: Add Cadence D-PHY support
  dt-bindings: phy: Move the Cadence D-PHY bindings
  phy: dphy: Clarify lanes parameter documentation
  phy: dphy: Change units of wakeup and init parameters
  phy: dphy: Remove unused header
  MAINTAINERS: phy: fill Armada 3700 PHY drivers entry
  dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings
  phy: add A3700 UTMI PHY driver
  MAINTAINERS: phy: add entry for Armada 3700 COMPHY driver
  dt-bindings: phy: mvebu-comphy: extend the file to describe a3700 bindings
  phy: add A3700 COMPHY support
  phy: mvebu-cp110-comphy: fix port check in ->xlate()
  phy: armada375-usb2: switch to SPDX license identifier
  phy: make phy-armada375-usb2 explicitly non-modular
  phy: make phy-mvebu-sata explicitly non-modular
  phy: make phy-core explicitly non-modular
  phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
  ...
2019-02-12 14:59:43 +01:00
Marc Gonzalez 203d9b1192 phy: qcom-qmp: Add QMP UFS PHY support for msm8998
Use same init sequence as sdm845.

Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-12 13:02:38 +05:30