Commit Graph

1179 Commits

Author SHA1 Message Date
Linus Torvalds d9351ea14d Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ chip updates from Ingo Molnar:
 "A late irqchips update:

   - New TI INTR/INTA set of drivers

   - Rewrite of the stm32mp1-exti driver as a platform driver

   - Update the IOMMU MSI mapping API to be RT friendly

   - A number of cleanups and other low impact fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
  irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
  irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
  irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
  irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
  iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
  genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
  arm64: arch_k3: Enable interrupt controller drivers
  irqchip/ti-sci-inta: Add msi domain support
  soc: ti: Add MSI domain bus support for Interrupt Aggregator
  irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
  dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
  irqchip/ti-sci-intr: Add support for Interrupt Router driver
  dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
  gpio: thunderx: Use the default parent apis for {request,release}_resources
  genirq: Introduce irq_chip_{request,release}_resource_parent() apis
  firmware: ti_sci: Add helper apis to manage resources
  firmware: ti_sci: Add RM mapping table for am654
  firmware: ti_sci: Add support for IRQ management
  firmware: ti_sci: Add support for RM core ops
  ...
2019-05-19 10:58:45 -07:00
Olof Johansson 9e3bf9cdc7 Merge tag 'soc-fsl-fix-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/late
NXP/FSL soc driver fixes for v5.1

QE drivers
- Fix an error path in qe_pin_request()

* tag 'soc-fsl-fix-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc/fsl/qe: Fix an error code in qe_pin_request()

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16 10:53:28 -07:00
Dan Carpenter c180d710ee soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe
The devm_ioremap_resource() function doesn't retunr NULL, it returns
error pointers.

Fixes: ecc133c6da ("soc: ixp4xx: qmgr: Pass resources")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16 10:53:11 -07:00
Linus Torvalds dc413a90ed ARM: SoC-related driver updates
Various driver updates for platforms and a couple of the small driver
 subsystems we merge through our tree:
 
 Among the larger pieces:
 
  - Power management improvements for TI am335x and am437x (RTC suspend/wake)
  - Misc new additions for Amlogic (socinfo updates)
  - ZynqMP FPGA manager
  - Nvidia improvements for reset/powergate handling
  - PMIC wrapper for Mediatek MT8516
  - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlzc+9QPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3o3sQAIJ2SZnITy/ycvkbhKe+V/806P+aoqMpbZDw
 7ldBQFoIMQqVIoeSSeml+9B86ZGyK4CGTgnvsfAI/Zt2fZSHczjqLP5InbEnvB5M
 4naf0nSjSlkb5F4p24wXQ7WTI8IO45SwqG4hCi/WW6MakxN21cwdMWHBn+TRZWQu
 +AlJdwyDFJoMRXcq8xvLHOBNVAqD3LyvlECbLKqn3+UPwwYw0Ti1dsLwaMLOYDbc
 o/1dC2O8111kg2DgO0OM4Tl7jdbpmGA5MeixbVnmu3t4b2s26trG33eXqK2yWqaV
 XigD85R74GAq/wmgnzjdiNaIgZjlPPitVYaTE4L6Od39zMgXemnsqMlh/byPeO2y
 JvRRLEIciNay9q9uq+8H2zRWwa2wLqAewjssTTMM0RJNQWUtonVCkD8DAx4GLDof
 6Ej42XGbtxnqpf0g854mBJ4zaPfZLN4xK//1Llx9HkM8mhLZLJ7BQvgvW1JzniSa
 XKnmjqK7SySiJ4bbjn+aFk5EkX7Oh5aXno18tVNKXdxc8nWoEw4PHMUmCCHOFPye
 /1oxc95Ux8P/lV+B0ZjiI0yTAX/IpDkEszAYmgdy6pWh1hXnYUr/Rpm7cGUG8kzk
 SbtyB8JOI/DFQ7QMDfPp6e6bcB8zTbUuF9H2MXwPN5TqGzP/mya88DC5Iv1jY4jc
 0oWv/uhj
 =YSfu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms and a couple of the small driver
  subsystems we merge through our tree:

  Among the larger pieces:

   - Power management improvements for TI am335x and am437x (RTC
     suspend/wake)

   - Misc new additions for Amlogic (socinfo updates)

   - ZynqMP FPGA manager

   - Nvidia improvements for reset/powergate handling

   - PMIC wrapper for Mediatek MT8516

   - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  soc: aspeed: fix Kconfig
  soc: add aspeed folder and misc drivers
  spi: zynqmp: Fix build break
  soc: imx: Add generic i.MX8 SoC driver
  MAINTAINERS: Update email for Qualcomm SoC maintainer
  memory: tegra: Fix a typos for "fdcdwr2" mc client
  Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
  memory: tegra: Replace readl-writel with mc_readl-mc_writel
  memory: tegra: Fix integer overflow on tick value calculation
  memory: tegra: Fix missed registers values latching
  ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
  optee: allow to work without static shared memory
  soc/tegra: pmc: Move powergate initialisation to probe
  soc/tegra: pmc: Remove reset sysfs entries on error
  soc/tegra: pmc: Fix reset sources and levels
  soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
  soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
  fpga manager: Adding FPGA Manager support for Xilinx zynqmp
  dt-bindings: fpga: Add bindings for ZynqMP fpga driver
  firmware: xilinx: Add fpga API's
  ...
2019-05-16 09:19:14 -07:00
Linus Torvalds 22c58fd70c ARM: SoC platform updates
SoC updates, mostly refactorings and cleanups of old legacy platforms.
 Major themes this release:
 
  - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)
  - Moving some of the ep93xx headers around to get it closer to multiplatform enabled.
  - Cleanups of Davinci
 
 This tag also contains a few patches that were queued up as fixes before
 5.1 but I didn't get sent in before release.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlzc+sMPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3ygQP/3mxLFGJxgHk6m/41V4Tepv9F2ZZ3BW4Lcp7
 vZtr6xiyhZXzIHOGzqQ4VGllfWhMWnjzZZe3iruSBY1gpJU7D4x054T3xVsIDs9F
 EIcbBm5fE0O0bdijfk7V8vBu7LOIP/KYdaD1n9WDhW0Hy4wTXN8NNLSKEU5Lq15p
 oz/A3QP5GcwhGAqaHyxx445La9yEKKWAsc2cOCRCdvfw6+n1GpoE6TI1YGjDvqbw
 xd73mIwXb0l0f7jhCV7OPyZ3t/aQgTD3ddr4gHUGNa8sSWmD5nupSVxj23FkbGby
 ejqJMxOfHpJJGIL/sxmR3+cFBYxyE+JNmrEq/kDW5ncWs/LY91juJxR1dkQKs6Mj
 4Y9CWruftDz34DlFs/J33hF/rdZ73O91ldk7zqND41Fi5aLrIKvZBJlTuqyZ0tGV
 YNRxsjWF953h8TXimDV0KvBgO4+E8d5ype/kIYtEGYO9DVmXQGMxFx2Gt2I/NfoH
 5tCtVFwDPpMxJShpXHLMzUT8sQL3mytg5L/MIPTGx+zAtDwx/qTLEEAElffG29oI
 vdzgJR0lrG/zzqQh25/M80UZYMdOrwtjAB42C+jAvlfQ0C4DtvSH+8OdcROOgj0b
 GbAJbTdHYTD6OpoxhSuRii7zzNxw+i7pQj+uLSt8s8ZReGkUk5a2wpRpoVoV2WxK
 RJHkMK95
 =pUeO
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms.

  Major themes this release:

   - Conversion of ixp4xx to a modern platform (drivers, DT, bindings)

   - Moving some of the ep93xx headers around to get it closer to
     multiplatform enabled.

   - Cleanups of Davinci

  This also contains a few patches that were queued up as fixes before
  5.1 but I didn't get sent in before release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  ARM: debug-ll: add default address for digicolor
  ARM: u300: regulator: add MODULE_LICENSE()
  ARM: ep93xx: move private headers out of mach/*
  ARM: ep93xx: move pinctrl interfaces into include/linux/soc
  ARM: ep93xx: keypad: stop using mach/platform.h
  ARM: ep93xx: move network platform data to separate header
  ARM: stm32: add AMBA support for stm32 family
  MAINTAINERS: update arch/arm/mach-davinci
  ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu
  ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
  soc: ixp4xx: qmgr: Add DT probe code
  soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
  soc: ixp4xx: npe: Add DT probe code
  soc: ixp4xx: Add DT bindings for IXP4xx NPE
  soc: ixp4xx: qmgr: Pass resources
  soc: ixp4xx: Remove unused functions
  soc: ixp4xx: Uninline several functions
  soc: ixp4xx: npe: Pass addresses as resources
  ARM: ixp4xx: Turn the QMGR into a platform device
  ARM: ixp4xx: Turn the NPE into a platform device
  ...
2019-05-16 08:31:32 -07:00
Linus Torvalds bfbfbf7368 More power management updates for 5.2-rc1
- Fix recent regression causing kernels built with CONFIG_PM
    unset to crash on systems that support the Performance and
    Energy Bias Hint (EPB) by avoiding to compile the EPB-related
    code depending on CONFIG_PM when it is unset (Rafael Wysocki).
 
  - Clean up the transition notifier invocation code in the cpufreq
    core and change some users of cpufreq transition notifiers
    accordingly (Viresh Kumar).
 
  - Change MAINTAINERS to cover the schedutil governor as part of
    cpufreq (Viresh Kumar).
 
  - Simplify cpufreq_init_policy() to avoid redundant computations
    (Yue Hu).
 
  - Add explanatory comment to the cpufreq core (Rafael Wysocki).
 
  - Introduce a new flag, GENPD_FLAG_RPM_ALWAYS_ON, to the generic
    power domains (genpd) framework along with the first user of it
    (Leonard Crestez).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAlzb4TASHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxiEAP/37uQOx+I8J3IU7HQcPIkdI1hgksLEzo
 g2eoREekjszIjFK9xa70X3V/QnGK4YSPQ/cHCjgXfVhwkO5TJzte5T5M2z9gUCDT
 7OMYWCI6hP6Mo5UWlP4dQ9Cqce4SB3TdibadevxcVOhFAW/xz42y5Gr6s4WkexJf
 Swb2uoLS4gGANyhUhx6XEZ5NpWZkWcK2ygZ8VJZETnoIwxMSUW7FTJkF+4s2tXLZ
 GH+F5jWAbwPlg6g2c54lPL1HtiAvK+/018aF8CZMqUBec94RHDFybVOlb5sacfQW
 +Y0W/mc/6SMqT3OUcQ0H3Z/qkgwR8mL01hH6gCP1jA5OBljmTjzk0Bbc4c3n9BEN
 aRy4M8Qc/GXzEBPO3Z9AlYik6ALH9iUgL2hewGZAFN8kn9ZGPAqYsctdCVkfKL1u
 4Esz5+wOsyYmBx910PozL+p2jbTH0x89sSo1qXUQr2JEiNm2iL4I4+ndqhuiq4LO
 sQPHCpe4HhYWzIQzJLDurv6hAxxU5PUsGg8XDEGlsyowIPDoIkMgC93RRLGZ/taY
 Ivc2FSlwLTSkzBHwVfckakXPvfyFdw8DFL2n66dQbXS9FFNshOF/TFx40iV42i5H
 wusyIZIT1y1H74De0EVntUho3xBo3nrrsu1o2NaXsTBoEsYwJiCji4yOZlI1Zh+m
 A9coiXKm4hY5
 =LqTN
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These fix a recent regression causing kernels built with CONFIG_PM
  unset to crash on systems that support the Performance and Energy Bias
  Hint (EPB), clean up the cpufreq core and some users of transition
  notifiers and introduce a new power domain flag into the generic power
  domains framework (genpd).

  Specifics:

   - Fix recent regression causing kernels built with CONFIG_PM unset to
     crash on systems that support the Performance and Energy Bias Hint
     (EPB) by avoiding to compile the EPB-related code depending on
     CONFIG_PM when it is unset (Rafael Wysocki).

   - Clean up the transition notifier invocation code in the cpufreq
     core and change some users of cpufreq transition notifiers
     accordingly (Viresh Kumar).

   - Change MAINTAINERS to cover the schedutil governor as part of
     cpufreq (Viresh Kumar).

   - Simplify cpufreq_init_policy() to avoid redundant computations (Yue
     Hu).

   - Add explanatory comment to the cpufreq core (Rafael Wysocki).

   - Introduce a new flag, GENPD_FLAG_RPM_ALWAYS_ON, to the generic
     power domains (genpd) framework along with the first user of it
     (Leonard Crestez)"

* tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619
  PM / Domains: Add GENPD_FLAG_RPM_ALWAYS_ON flag
  cpufreq: Update MAINTAINERS to include schedutil governor
  cpufreq: Don't find governor for setpolicy drivers in cpufreq_init_policy()
  cpufreq: Explain the kobject_put() in cpufreq_policy_alloc()
  cpufreq: Call transition notifier only once for each policy
  x86: intel_epb: Take CONFIG_PM into account
2019-05-15 08:46:44 -07:00
Leonard Crestez 8d5d766f00 soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619
This allows PU domain to be turned off in suspend and save power.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-13 10:51:31 +02:00
Lokesh Vutla 49b323157b soc: ti: Add MSI domain bus support for Interrupt Aggregator
With the system coprocessor managing the range allocation of the
inputs to Interrupt Aggregator, it is difficult to represent
the device IRQs from DT.

The suggestion is to use MSI in such cases where devices wants
to allocate and group interrupts dynamically.

Create a MSI domain bus layer that allocates and frees MSIs for
a device.

APIs that are implemented:
- ti_sci_inta_msi_create_irq_domain() that creates a MSI domain
- ti_sci_inta_msi_domain_alloc_irqs() that creates MSIs for the
  specified device and resource.
- ti_sci_inta_msi_domain_free_irqs() frees the irqs attached to the device.
- ti_sci_inta_msi_get_virq() for getting the virq attached to a specific event.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-01 10:49:17 +01:00
Samuel Holland a84014e1db soc: sunxi: Fix missing dependency on REGMAP_MMIO
When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but
not REGMAP_MMIO, so the kernel fails to link with an undefined reference
to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in
drivers/base/regmap/Kconfig.

This creates the following dependency loop:

  drivers/of/Kconfig:68:                symbol OF_IRQ depends on IRQ_DOMAIN
  kernel/irq/Kconfig:63:                symbol IRQ_DOMAIN is selected by REGMAP
  drivers/base/regmap/Kconfig:7:        symbol REGMAP default is visible depending on REGMAP_MMIO
  drivers/base/regmap/Kconfig:39:       symbol REGMAP_MMIO is selected by SUNXI_SRAM
  drivers/soc/sunxi/Kconfig:4:          symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI
  drivers/usb/musb/Kconfig:63:          symbol USB_MUSB_SUNXI depends on GENERIC_PHY
  drivers/phy/Kconfig:7:                symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3
  drivers/phy/broadcom/Kconfig:29:      symbol PHY_BCM_NS_USB3 depends on MDIO_BUS
  drivers/net/phy/Kconfig:12:           symbol MDIO_BUS default is visible depending on PHYLIB
  drivers/net/phy/Kconfig:181:          symbol PHYLIB is selected by ARC_EMAC_CORE
  drivers/net/ethernet/arc/Kconfig:18:  symbol ARC_EMAC_CORE is selected by ARC_EMAC
  drivers/net/ethernet/arc/Kconfig:24:  symbol ARC_EMAC depends on OF_IRQ

To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY
instead of depending on it. This matches the use of GENERIC_PHY by all
but two other drivers.

Cc: <stable@vger.kernel.org> # 4.19
Fixes: 5828729beb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-30 17:55:08 +02:00
Olof Johansson 80d0c64924 soc: aspeed: fix Kconfig
Fixes build break:

scripts/kconfig/conf  --allnoconfig Kconfig
drivers/soc/Kconfig:24: 'menu' in different file than 'menu'
drivers/soc/aspeed/Kconfig:1: location of the 'menu'
drivers/Kconfig:233: 'menu' in different file than 'menu'
drivers/soc/aspeed/Kconfig:1: location of the 'menu'
<none>:34: syntax error

Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29 12:25:46 -07:00
Olof Johansson bcca940e51 Select correct pwm solution by default.
-----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAly/dWgQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgdfoB/4irvAihmabor/KyjEeBZMO7NDb4Z+WDOhQ
 3dsIsqotPwza4m81ERlKOVdXEYqd+692Jat8fLHF4DgL9NjKPLARDpTg6MeWXB8L
 z4BaSwrA5WC9VqbnbxbjWMdk2uJPo52YngLQeznsDFcGJdqHux1XGU/kICV0Tkqt
 DXdCbRzVIC+9GHHSG8VVPyVIDkFsFxFSb6ENOESh/W9SqKg1uHZBuZy+WCoojrKK
 C4IU4XxUeZCLJGu63F5VpzVaqcw7pMvff0qig3PDr426mLS146wdQVtXMsdH2cf3
 Sz+mqXkuA2ORyD3CRhRRVnckALrw5aFtLGkOEWlUKNY59zElvoyU
 =4KwL
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/drivers

Select correct pwm solution by default.

* tag 'v5.2-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  soc: rockchip: Set the proper PWM for rk3288

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29 09:56:07 -07:00
Olof Johansson c687702b5f pmic wrapper:
- add mt8516 bindings
 - add mt8516 driver support
 - fix clang warning
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEiUuSfQSYnG8EMsBltDliWyzx00MFAly/OBUXHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQtDliWyzx00Ng4g//UBksTwzGlrgqlSS+GeEgIll2
 a3srqbjePGeAFT4P5IVnp68ubOntzoOu4tB+tVvu2HnCBcdTkR2F/UKrCXzOHSYV
 QsdH/u9KnMxZw6kOUtL5CgfF/y6gjz0ZKBY6i3wxgnb1bUuXbAWk0NJ/yVaJF7M+
 J7lRr00AvN6RROmLT2iD84+5Q809vy96iPyashBO40iCSW5qipg1NIBED+UelGgL
 WzGuEoWd8c4dN80T5Lmk/A3rQGU6JVIV2MJ/iLWDBgVBzs8CMV83Tnx1pUQx5+jq
 EgahvygjQOXjJ6ySuSg7bhgJktpnaHVK+fL3xB1Zr6xhstWNTpw/RG6BvLMZ524Y
 0FtyNaHgiD64pf32MBdrlKBtGhBhU2oVfFIZEmjg7JMJ/BpOLJ6v5z+WX3kmEQr5
 GhmGIu7i+K4izER2E24lCLs7u8sIA2oiurjs3tS9XoFN70ahFiKodx1LCKFtN0yH
 wil6b6GNc/SbKNXTHo0Sw+a2aeDs6njcd2A1eMPBjWcF6XfNFaOuaGTsIcR64wHP
 sxVv39dg0nC4aGgzOhNXD90xpOoJU2eoylnot3k8p1fu6L84CO4OaGYZ4jGUYCr0
 N9iP6P3LLPFMUF7Pd6aJEuoox53sxlMdM1gF/YkR/Fd85e8YDaYFuTS228qvHevm
 WS/pH7Kk76q3Ao4s2wU=
 =L0TN
 -----END PGP SIGNATURE-----

Merge tag 'v5.1-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers

pmic wrapper:
- add mt8516 bindings
- add mt8516 driver support
- fix clang warning

* tag 'v5.1-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  soc: mediatek: pwrap: Zero initialize rdata in pwrap_init_cipher
  soc: mediatek: pwrap: add support for MT8516 pwrap
  soc: mediatek: pwrap: add missing check on rstc
  dt-bindings: pwrap: mediatek: add pwrap support for MT8516

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29 09:52:30 -07:00
Olof Johansson 782935d12e Qualcomm ARM Based Driver Updates for v5.2
* Update MAINTAINERS for Andy Gross's new email address
 * Add support for mmap in RMTFS
 * Fixup for QMI to change txn wait to non-interruptible
 * Fixup for error code in probe of cmd-db
 * Fixup for slot number check in RMPH-RSC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcuU7sAAoJEFKiBbHx2RXVOvoQANFlaLjbZ0CKN5nqWhLYIxns
 QNJqZulsUceR8hMgCcIE9o8Fe6HPtfHQ0FHdQ1761UKmX7gHY+euhtVFr0D/Y6Kh
 6bxvDj1huytr79kH3+dL+pTR/ZWi1BDdttAbsF+41nvxGhFGTvNSOGbRjXSIih9S
 x0fnQzRyBSbEQzZYF0eYXfs5eqYUbpTpVnsvBruX+wKo7bfMtDzigJ29aszU4HPJ
 eUEd9hKpwCTisL3WSeo89qPlPXFpUL6fWitF99Xar/WP7RXaorUg15r6VK4uQQVz
 onqOMiC93prR5rjDym77weJWKS9vpi+Aa/6Rp68Sb3Cl43HmNSfMl+rL3L2v4i/o
 LY2ntcC9GCjG0T9EsA9UId4dLaePmaX7nI5xjlyCRbIXTqKWkhhQDp6OmR0Ess9X
 ZclVSDTsXX9GNMJ/8gYFA0Uv9IrCL0A+b9LwEFYx+xrcTg2PShhN1sVmnOO38j88
 87mwEvC/btmJCddXkQY5pOrI6ixb3TUDrfyu/uuwfMrN7A1EpF1I5CKXGvlYC8og
 H+7SR5EK3X0OruGjFqgjLr6dNgHAaCkdCT4AXOGxcakn2Po86W2r979SwFzjBEEB
 2fd8gPEeMTAiMdEhqkbBw+EiaGvNiOeBQTXgXocK9dEHXNLaqbQDuNRR3iZJx57W
 eMOQA379l7K41k8p4Hdk
 =nsKB
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/drivers

Qualcomm ARM Based Driver Updates for v5.2

* Update MAINTAINERS for Andy Gross's new email address
* Add support for mmap in RMTFS
* Fixup for QMI to change txn wait to non-interruptible
* Fixup for error code in probe of cmd-db
* Fixup for slot number check in RMPH-RSC

* tag 'qcom-drivers-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  MAINTAINERS: Update email for Qualcomm SoC maintainer
  drivers: soc: qcom: rpmh-rsc: Correct check for slot number
  soc: qcom: cmd-db: Fix an error code in cmd_db_dev_probe()
  soc: qcom: qmi: Change txn wait to non-interruptible
  soc: qcom: rmtfs: Add support for mmap functionality

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29 09:40:30 -07:00
Patrick Venture 524feb7994 soc: add aspeed folder and misc drivers
Create a SoC folder for the ASPEED parts and place the misc drivers
currently present into this folder.  These drivers are not generic part
drivers, but rather only apply to the ASPEED SoCs.

Signed-off-by: Patrick Venture <venture@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29 09:36:34 -07:00
Olof Johansson f99552d9eb i.MX drivers change for 5.2:
- A series from Aisheng to generalize the SCU powerdomain driver
    for easier adding new SCU based platforms like imx8qm.
  - Add a generic i.MX8 SoC driver for reporting SoC and platform
    information.
  - Replace explicit polling loop with a call to regmap_read_poll_timeout()
    for gpcv2 driver to avoid code repetition.
  - Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver
    code a bit.
  - Add general IRQ support for imx-scu driver, so that interrupt of
    device like RTC, thermal and watchdog can be handled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJcvWKIAAoJEFBXWFqHsHzOeCQH/j/lgujJU9RnyY2CFTelMyad
 uTKEUgk2vvbswBdFMaS7xAvbni24GOxUdKUYJul0oz5jBnK4wKmf6VY7TYMQ8Qht
 hsdp0dsHHgI1qysOiOSxidhIN/2aXFl/hSoF8FT/9m0qXqnmvoHGFQT0YoMGwznS
 +7tHuUt5cjUG/r5DMM6GOzI/w6K1of6RGGsLWvYeuy7OeoDhI2Gl5gtK+qxik98J
 qC9UM64jO93rmXebJuG+9ZNJ0FFATrBMboMB3a7rA3t9RvkAFKEuVRp3USPuj1ek
 TxNusTtkQwCeujy9QZu/eB/oUrScEbzJuw+sp0l69C9T2D44ucZLFbHixnwbigM=
 =1wlN
 -----END PGP SIGNATURE-----

Merge tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers change for 5.2:
 - A series from Aisheng to generalize the SCU powerdomain driver
   for easier adding new SCU based platforms like imx8qm.
 - Add a generic i.MX8 SoC driver for reporting SoC and platform
   information.
 - Replace explicit polling loop with a call to regmap_read_poll_timeout()
   for gpcv2 driver to avoid code repetition.
 - Use devm_platform_ioremap_resource() to simplify gpc/gpcv2 driver
   code a bit.
 - Add general IRQ support for imx-scu driver, so that interrupt of
   device like RTC, thermal and watchdog can be handled.

* tag 'imx-drivers-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: Add generic i.MX8 SoC driver
  firmware: imx: enable imx scu general irq function
  soc: imx: gpcv2: use devm_platform_ioremap_resource() to simplify code
  soc: imx: gpc: use devm_platform_ioremap_resource() to simplify code
  firmware: imx: scu-pd: decouple the SS information from domain names
  firmware: imx: scu-pd: add specifying the base of domain name index support
  firmware: imx: scu-pd: use bool to set postfix
  soc: imx: gpcv2: Make use of regmap_read_poll_timeout()

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-29 09:25:21 -07:00
Olof Johansson 149d35c72a soc: amlogic: updates for v5.2, round 2
- VPU power domain: add supporg for G12A SoCs
 - socinfo: add new SoC and package IDS.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAly8fy8ACgkQWTcYmtP7
 xmXfMA/+L9PH8j9qF5RuuoQaxEhJlYHwxmC6cFQYE9ZWKOpyID1y0vtg1b68b9S9
 umlKhz978xF06bh3iJodmcUM5pJKLjGUiQI6Q1+01BsAZ+pZu3MSK47Cs7GTmPrN
 VpEaYaabJbUpyp3MlbAWg9BB1n1Q1Kz5sb8KTWYH+E+IzLbFjz+1+r7pKzh+XfVU
 eMMYhaTg/1/N4tHO1NACOOJfILNdV1qH1h5Wy/NHBVCVmPCZpTGVmfs28bqy5/FM
 tKgFNXslFQJ6wXsYQg1KGYf10aU4+EOAiEU56EL1dLTkPiF3/qpJrhlf3uYnSbTy
 h2kZvdJxBZt3/Vkn8Koy0mLZO6rogsOhFer+vOCrqwEoULhQgz0Rd9BZKyOqLMG+
 I2zUJPBNg8U1EeFV5lhlLX8ViCd9+wCIePrgy9TOJAYQFpn2UVUndQqjJJrH6Mn7
 M875ChOmOXsxCnzYmPejV8VsubQw0w1/ZHfEbWnRnY5J1rIAuKBcGcjgk95iRKJ3
 5NkxfFJ/JKKBlOfzfmSbAj45oY5cJEirqKf2Lw79jWODULTZ+KPBj73ripjUAE+9
 YZvEEVk3yVfNDkr1CEwCBxBHJaqYCRgCtMbk4pQ4k1UhYNw2QreLSv1rPtt27Yl0
 9TX3+BgyltmqGIqs78MnoDbF0kplxtpwghTytzU474ci3osDcxM=
 =VYLz
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers

soc: amlogic: updates for v5.2, round 2
- VPU power domain: add supporg for G12A SoCs
- socinfo: add new SoC and package IDS.

* tag 'amlogic-drivers-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
  soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28 23:44:20 -07:00
Olof Johansson 1895ef4ef2 This modernizes the IXP4xx platform and adds initial Device Tree
Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to
 offset 16, converts to SPARSE_IRQ, then we add proper subsystem
 drivers in each subsystem for irqchip, GPIO and clocksource and
 switch over to using these new drivers.
 
 Next we modernize the NPE and QMGR drivers and push them down
 into drivers/soc.
 
 This has been tested on the IXP4xx NSLU2 and the Gateworks
 GW2358-4.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcvxsRAAoJEEEQszewGV1zZE8QAIrpxZGGKUv7o/NrtR2J8CLR
 jl7cm8Rx+TVlowEz4Un2erhMEFEIp91DeKsN76fBaAszmogbuck1u+ZiArpL7u12
 sJzYwQUqyCuGFQbiOIu1PyYCCGebVvZYvYjoEDzt5GOp5rCNh6xsP9eDQe7F8ZgE
 60iKiLEp+U3VQXB7+/KdvIpVVM2V7wJyKHtKkZVsTEH0iKsTy6yormBZc3r/a1Ka
 7fZDLC6KLtaQ95YpqL+L/ZZNickj/J2wqnVuh4GrzsJ5m9GphoUfD2X3jtuQyjo/
 VlHy7mEmWAvS68lQXNibXLi9h8tNr9XApRDH/snoLRq4KKM8P30OgZMc28IWBqwZ
 CqbxfN9++ffZBt5udY3Jfdsj3lgDOMjBzvfIJpQxLbFCfTaQWtBZ5KaILGdcCuFH
 TdCUT5tS/G7XUlsAkFQc1ubseYl3PmGgBrTh6N150hNH45xsuniaBUv/RgltA7ZY
 Q437ctUs5IySPOm3dPzgHQwqC1TN/LuHX3fbQwcgj792iZhn5hExazmgLYGwzy/l
 vLM9izG7NerZQgpspaUq1jeCPVVCsZ2q/n8vWD7beBLWTo7bZhg0uLXQOwR/9ITc
 B5vC0h9Fe9O732ZZY5FgJXYgUkQ9fRjN/lMv6RWgPlc6/r8eQZ+OimAprpmB96Gu
 2IfYAFI4lZDS/nJL9FmF
 =0U95
 -----END PGP SIGNATURE-----

Merge tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc

This modernizes the IXP4xx platform and adds initial Device Tree
Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to
offset 16, converts to SPARSE_IRQ, then we add proper subsystem
drivers in each subsystem for irqchip, GPIO and clocksource and
switch over to using these new drivers.

Next we modernize the NPE and QMGR drivers and push them down
into drivers/soc.

This has been tested on the IXP4xx NSLU2 and the Gateworks
GW2358-4.

* tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: (31 commits)
  ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
  soc: ixp4xx: qmgr: Add DT probe code
  soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
  soc: ixp4xx: npe: Add DT probe code
  soc: ixp4xx: Add DT bindings for IXP4xx NPE
  soc: ixp4xx: qmgr: Pass resources
  soc: ixp4xx: Remove unused functions
  soc: ixp4xx: Uninline several functions
  soc: ixp4xx: npe: Pass addresses as resources
  ARM: ixp4xx: Turn the QMGR into a platform device
  ARM: ixp4xx: Turn the NPE into a platform device
  ARM: ixp4xx: Move IXP4xx QMGR and NPE headers
  ARM: ixp4xx: Move NPE and QMGR to drivers/soc
  ARM: dts: Add some initial IXP4xx device trees
  ARM: ixp4xx: Add device tree boot support
  ARM: ixp4xx: Add DT bindings
  gpio: ixp4xx: Add OF probing support
  gpio: ixp4xx: Add DT bindings
  clocksource/drivers/ixp4xx: Add OF initialization support
  clocksource/drivers/ixp4xx: Add DT bindings
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28 23:43:07 -07:00
Olof Johansson 3e0c0aee45 Renesas ARM Based SoC Drivers Updates for v5.2
* Identify R-Car M3-W ES1.3
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAly52tsACgkQ189kaWo3
 T75R7A//fhCNtwgh1c4fZRE7Sjh0NpBj5LoD4QlcL86oCIKfL5qUFekDiCQCb7e+
 AhxBIuNNuSEJCFj8weL1rXH+LA0CYihd4pUd109ZLXXB0uFSWLzMML4YAnSq0PLG
 a0EWlqSZE7UnFrAGzEew3BOj3WG+alSCO1HKahgIC18FzYmB6CTb3C8N2MNH19/X
 Uu415t0SqRU4kz9EUIyexxiBqJedbF8FqHpbdtyGftqLojZK1t7U6rFcxr6IUaO8
 Y8e+4au2lZib6vr6L80d8TMNfkRTrsn1Uef9EF93/5wTblviY1SZgDF/F+8aSySa
 uDsymZ2MiIsWEY9u/Hq9UveKsOKBdYersf4s+T7plJG2W2gConpHvebBbocPGwi2
 cPkqM2fm3lsKChY/OMH45oUoK4B+BnWouXo7tRstgeWZ4XLT56dbij5RHSDSlQj/
 YfICXoHUnZdnnO32nKEFqa5/f5agYVl/5Z6XVqt6A0iknBtn9gZryHEuQn5un1UH
 q7b1zalp9y3l0+M57ZFcIyo6fL+H6XzRQ82LIEMdXktFCe3oCn50uU/a1VCO8XqJ
 hC9qICLwSMBWcyaW0170+K+6lhHrCEnpgIe7uxM4+4h4DuxfFSFPOJ3q4uggBgWY
 1IMEi9bo8IZa1j/vKabri7IDBf5CtUSJfE0dYmpTgSy1WgK/JYI=
 =EoPM
 -----END PGP SIGNATURE-----

Merge tag 'renesas-drivers-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/drivers

Renesas ARM Based SoC Drivers Updates for v5.2

* Identify R-Car M3-W ES1.3

* tag 'renesas-drivers-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: Identify R-Car M3-W ES1.3

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28 23:41:16 -07:00
Olof Johansson 990d4322cc soc/tegra: Changes for v5.2-rc1
Besides a couple of fixes to better cope with deferred probing, this set
 of patches also implements the acquire/release protocol for resets used
 during powergate operations. This is necessary to allow these resets to
 be temporarily shared with other devices that may also need to control
 these resets.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAly4jLYTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoT3mEAC0+8j1/l8AyNGGvwN1wnbWzIcQHLRJ
 +TBVP676sgfrZwUlgs35qDDnquiQNo5AYKa0As2QMb1dWIqO1NGiPWTneckYphj6
 1W1wVoKYoqfR56skyk5Kmt+RfqEkVvRF/Bd06VFKJe8La/ww1eaYXamkKaGNM/j5
 izRWhisdGQkd31X4pUJOWkHD7i1WN9RS643Dy9JDn2uzj8mgCC3IlC63ScaaC8Fq
 5DVIvNFvF79yUaSzCWGjskU1WsDzjK0qLtrFhAnVZOMUTfX/wbbBr4/hykLGwyvp
 aefFh97tTLCokIbgh8BecXXrcle44GgvG1b8pXJ6bKli8Ayf8TFsaAVuN87h+YSv
 wXW4fSlRldtBQbBl4ofj/jiDmqlt5mO17VAUN9MWLIui4G5GR4iAjR3SGqtK+SgD
 VdxSR1/Hk5MIAJeV6XuvDfdHoGkskVLDMiODcBqciXIZfPhOGnjz4s8EgMLGxs2F
 aQYpmGJdQDY0D+zt2PC+9CQvqX7iIFTWf5kywQTbMJ+dKTtOSeKl2zt85snnuuYI
 668pXSm0EJl+oK/gpBMbl3N6qRIe9x46cJ54E9fqGG4PW6ivb0n1GzwcQcm6IY8e
 sUhLM0dQTOvevLUHrzCap5kPTTMT2Iji9SgW3S7hx0FvHtg6ni+pEkMekAyqid9H
 1sRl96LBPaoj6Q==
 =27G2
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

soc/tegra: Changes for v5.2-rc1

Besides a couple of fixes to better cope with deferred probing, this set
of patches also implements the acquire/release protocol for resets used
during powergate operations. This is necessary to allow these resets to
be temporarily shared with other devices that may also need to control
these resets.

* tag 'tegra-for-5.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Move powergate initialisation to probe
  soc/tegra: pmc: Remove reset sysfs entries on error
  soc/tegra: pmc: Fix reset sources and levels
  soc/tegra: pmc: Implement acquire/release for resets
  reset: Add acquire/release support for arrays
  reset: Add acquired flag to of_reset_control_array_get()
  reset: add acquired/released state for exclusive reset controls

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28 23:33:50 -07:00
Olof Johansson b94d3ff97e arm64: zynqmp: SoC changes for v5.2
- Add support for ZynqMP fpga manager
 - Defer some probes which depends on firmware driver to be ready
 - Debugfs fix
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAly0QlMACgkQykllyylKDCFYngCfZOByHuyiliPv+PSa6KCtCics
 ccgAn3YC1zEfvh8pmj2t0cvO/EpV2pXC
 =HBAL
 -----END PGP SIGNATURE-----

Merge tag 'zynqmp-soc-for-v5.2' of https://github.com/Xilinx/linux-xlnx into arm/drivers

arm64: zynqmp: SoC changes for v5.2

- Add support for ZynqMP fpga manager
- Defer some probes which depends on firmware driver to be ready
- Debugfs fix

* tag 'zynqmp-soc-for-v5.2' of https://github.com/Xilinx/linux-xlnx:
  fpga manager: Adding FPGA Manager support for Xilinx zynqmp
  dt-bindings: fpga: Add bindings for ZynqMP fpga driver
  firmware: xilinx: Add fpga API's
  drivers: Defer probe if firmware is not ready
  firmware: xilinx: fix debugfs write handler

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28 23:07:03 -07:00
Olof Johansson 0065198e67 PM changes for am335x and am437x
This series adds support for am437x RTC-only mode in suspend. In the
 RTC-only mode suspend, everything is shut down except the RTC. This
 makes the power consumption very low for suspend mode.
 
 To support RTC-only mode, we need to export omap_rtc_power_off_program()
 from the rtc driver and improve PM code to save and restore the wkup
 domain context. As RTC-only mode depends on the device being wired
 properly for things like memory, we need to also check for the machine
 type before we allow it. We also need to run DDR3 hardware leveling on
 resume.
 
 Note that there is a trivial merge conflict between the RTC branch
 and these changes where the RTC branch makes tm2bcd() a void function
 and the error handling parts can be just dropped.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlywwLIRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXOBhg/+NRYTBaO4pmFKlTMKs+bgdpftHf6wPSID
 kUy62YiKhMMgbe6J+Ts/Hk2kCibuOfFmQ0axGFdHzMhpwTGThsWFiwaVr7OKF6ZE
 DwOlJ1ZwM2OXcdf8wVupRL/54Tg1Wjc6y/T63Q5K+IqKz7gjdf6n7CXdYn22qTmp
 4WK81dW1fx+9QNBbGBmMXEbNRlEImxeZRnWF1zJvydOCxO0jRbgnlGgpZJr36TeL
 Jj+HN+4fD6WmaQ3Slbgcr0jbAowjjTuyUfFwzEBe9G2KlxRyrxDd4ryY78tNxcIe
 L+yNMm7RGHD1Mb0+tdmpXESuj+O4hsuXglnK5vl19yc95nbwbTeRu0sv+WBEAal4
 mY7xTMzT08rLT7fDXuJ+5vZNbR1TLGIekmNnj5BvV8LyZ9ypXToOlOCtFonQxULu
 HFsiDkOOdKQhkuzw+V8EBksMXdD5crTVxyHY95hguvWTBUMTJjBo0Bq/9EmhKx0m
 HOglctIivV1/GFg/82QKatjXLLeuXtFqUJa7lc6GIkVteAvEhrbg2DQ8QhnZ8Zg+
 ghx0kKsA+KXvOItI6JrMjk/GQuwXTcIytkUhfTVuVlN+gV2PbGFCbohJOatwtXkp
 0+VQ0H6AN04FJPqgLDR1njvks6Ll503gbnqodDNL/xgaN+Pjw5zTabkM/hdIyCNV
 KS6XhdlYvtQ=
 =yNbG
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.2/am4-pm-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers

PM changes for am335x and am437x

This series adds support for am437x RTC-only mode in suspend. In the
RTC-only mode suspend, everything is shut down except the RTC. This
makes the power consumption very low for suspend mode.

To support RTC-only mode, we need to export omap_rtc_power_off_program()
from the rtc driver and improve PM code to save and restore the wkup
domain context. As RTC-only mode depends on the device being wired
properly for things like memory, we need to also check for the machine
type before we allow it. We also need to run DDR3 hardware leveling on
resume.

Note that there is a trivial merge conflict between the RTC branch
and these changes where the RTC branch makes tm2bcd() a void function
and the error handling parts can be just dropped.

* tag 'omap-for-v5.2/am4-pm-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: sleep43xx: Run EMIF HW leveling on resume path
  memory: ti-emif-sram: Add ti_emif_run_hw_leveling for DDR3 hardware leveling
  soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support
  soc: ti: pm33xx: Move the am33xx_push_sram_idle to the top
  ARM: OMAP2+: pm33xx: Add support for rtc+ddr in self refresh mode
  rtc: OMAP: Add support for rtc-only mode

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28 23:04:13 -07:00
Olof Johansson 424adc176a soc: Amlogic updates for v5.2
- socinfo: support new SoCs / packages
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAlyei14ACgkQWTcYmtP7
 xmWvfg/+P+s9EJF9w9iSMWc6DCfwvufJRfPBO6T8MGoTSHzR8vPoCRDnwFtIhzh5
 ZOMbGWeutXv7cQynbbqWsSTi+qY9ye7JjEW142Abxa2bMc51hxWsR9Y3Sxt/tUam
 KbikqYuyv7svSPoxpucLi30ykcti2BFdHMrfuNhM+Ml6IuFVvOJ1bJA5scQXVB7l
 49blLz9VTtAkoPRD8XBd+otDntb/8XZxfUyD2FANZhauXNiriQxAzOaauru7iMz0
 V1Nd5MzwW3q+SQ4Qn1iohCfAVmPdgqFmq1DItJXm0iaaYF/fxPRj7Sql5NVx+M2O
 iL6bozt/aAJRVcleGiS78jTawQh2FTE1h8NuVGDmGU2bg43E75DhbBeU1M95zZyM
 uMH96ofjejF2SKPFT5jl67qDCrOj0QwInM5Nivoa0lYDNhS+2ZXN/S7Bw8XF3KfO
 Igxub9/TKzSAVdB04V6CvT+v0YZW/f2exB0/KnIcmQC0tFiEf/CEfZb5QM4W5l5b
 BGGH+VyJaHNXobmzhaVOCapy2TlEIjOk5aVKu52B7Q7XsPuRs7guVWuIdqAt1tH8
 lclXq3tju9shqfXJPtZiTvZzQbhElQZdNlcyDl1kSCMjCdqSR5lW8hfmEF//lU2F
 qPI5W3w73xkNCSFwCgbC1DYw8/N5aum8dIe28bz6ZKvsNyY+jV4=
 =rHNh
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers

soc: Amlogic updates for v5.2
- socinfo: support new SoCs / packages

* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  meson-gx-socinfo: add missing of_node_put after of_device_is_available
  soc: amlogic: gx-socinfo: Add new SoC IDs and Packages IDs
  soc: amlogic: gx-socinfo: Add mask for each SoC packages

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-28 12:07:53 -07:00
Linus Walleij 9e01a00958 soc: ixp4xx: qmgr: Add DT probe code
This makes the queue manager driver able to probe from the device
tree. It only needs to get a memory resource and two interrupts
and the platform device provides these as resources, so all is
pretty simple.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:16 +02:00
Linus Walleij e00797f2e0 soc: ixp4xx: npe: Add DT probe code
This makes the NPE driver able to probe from the device tree.
It only needs to get three memory resources and the plaform
device provide these, so all is pretty simple.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:16 +02:00
Linus Walleij ecc133c6da soc: ixp4xx: qmgr: Pass resources
Instead of using hardcoded base address implicitly
obtained through <linux/io.h>, pass the physical base
for the QMGR block as a memory resource and remap
it in the driver.

Also pass the two IRQs as resources and obtain them
in the driver.

Use devm_* accessors and simplify the error path in the
process. Drop memory region request as this is done by
the devm_ioremap* functions.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:16 +02:00
Linus Walleij 6b39031954 soc: ixp4xx: Remove unused functions
These former inlines turn out to be unused in the kernel.
If they are needed in the future, they can be resurrected
by reverting or studying this commit.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:16 +02:00
Linus Walleij d08502f245 soc: ixp4xx: Uninline several functions
These inline functions immediately exploit the static ioremaps
for the queue manager memory region. This does not work with
multiplatform where everything need to be dynamically remapped,
so get rid of these inlines and create new exports for those
used by other drivers.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:15 +02:00
Linus Walleij 0b458d7b10 soc: ixp4xx: npe: Pass addresses as resources
Instead of using hardcoded base addresses implicitly
obtained through <linux/io.h>, pass the physical base
for the three NPE blocks as memory resources and remap
these in the driver.

Drop the memory request region business, this will
anyways be done by devm_* remapping functions.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:15 +02:00
Linus Walleij 81bca32fcc ARM: ixp4xx: Turn the QMGR into a platform device
Instead of registering everything related to the QMGR
unconditionally in the module_init() call (which will
never work with multiplatform) create a platform device
and probe the QMGR like any other device.

Put the device second in the list of devices added for
the platform so it is there when the dependent network
and crypto drivers probe later on.

This probe() path will not be taken unconditionally on
device tree boots, so remove the DT guard.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:15 +02:00
Linus Walleij bc4d7eafb7 ARM: ixp4xx: Turn the NPE into a platform device
Instead of registering everything related to the NPE
unconditionally in the module_init() call (which will
never work with multiplatform) create a platform device
and probe the NPE like any other device.

Put the device first in the list of devices added for
the platform so it is there when the dependent network
and crypto drivers probe later on.

This probe() path will not be taken unconditionally on
device tree boots, so remove the DT guard.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:15 +02:00
Linus Walleij 4af20dc583 ARM: ixp4xx: Move IXP4xx QMGR and NPE headers
This moves the IXP4xx Queue Manager and Network Processing
Engine headers out of the <mack/*> include path as that is
incompatible with multiplatform.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:15 +02:00
Linus Walleij fcf2d8978c ARM: ixp4xx: Move NPE and QMGR to drivers/soc
The Network Processing Engine and Queue Manager are
versatile firmware components used by several IXP4xx
drivers.

Drivers are relying on getting access to these components
using <mach/*> headers which does not work with
multiplatform. We need to find a better place for the
drivers to live.

Let's first move them to drivers/soc and the start to
refactor a bit by passing resources and moving headers.

This patch introduce static IRQ assignments but that
will be fixed by later patches in this series.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:15 +02:00
Abel Vesa a7e26f356c soc: imx: Add generic i.MX8 SoC driver
Add generic i.MX8 SoC driver along with the i.MX8MQ SoC specific code.
For now, only i.MX8MQ revision B1 is supported. For any other, i.MX8MQ
revision it will print 'unknown'.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-20 21:26:36 +08:00
Jon Hunter 6ac2a01de1 soc/tegra: pmc: Move powergate initialisation to probe
Commit 8df127456f ("soc/tegra: pmc: Enable XUSB partitions on boot")
was added as a workaround to ensure that the XUSB powergates or domains
were turned on early during boot because as this time the Tegra XHCI
driver did not handle the power domains at all. Now that the Tegra XHCI
driver has been updated to properly managed the power domains, the
workaround to enable the XUSB power domain early has been removed. This
also means that we can now move the initialisation of the powergates
into the PMC driver probe. Therefore, move the powergate initialisation
into the PMC driver probe and return any errors detected. To handle any
errors, functions to cleanup and remove any power-domains registered
with the generic power-domain framework have been added.

Finally the initialisation of the 'powergates_available' bitmask is kept
in the PMC early init function to allow the legacy PMC powergate APIs to
be called during early boot for enabling secondary CPUs on 32-bit Tegra
devices.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17 10:32:33 +02:00
Jon Hunter a46b51cd2a soc/tegra: pmc: Remove reset sysfs entries on error
Commit 5f84bb1a40 ("soc/tegra: pmc: Add sysfs entries for reset info")
added sysfs entries for Tegra reset source and level. However, these
sysfs are not removed on error and so if the registering of PMC device
is probe deferred, then the next time we attempt to probe the PMC device
warnings such as the following will be displayed on boot ...

  sysfs: cannot create duplicate filename '/devices/platform/7000e400.pmc/reset_reason'

Fix this by calling device_remove_file() for each sysfs entry added on
failure. Note that we call device_remove_file() unconditionally without
checking if the sysfs entry was created in the first place, but this
should be OK because kernfs_remove_by_name_ns() will fail silently.

Fixes: 5f84bb1a40 ("soc/tegra: pmc: Add sysfs entries for reset info")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17 10:32:08 +02:00
Jon Hunter 00cdaa1b81 soc/tegra: pmc: Fix reset sources and levels
Commit 5f84bb1a40 ("soc/tegra: pmc: Add sysfs entries for reset info")
added support for reading the Tegra reset source and level from sysfs.
However, there are a few issues with this commit which are ...
1. The number of reset sources for Tegra210 is defined as 5 but it
   should be 6.
2. The number of reset sources for Tegra186 is defined as 13 but it
   should be 15.
3. The SoC data variables num_reset_sources and num_reset_levels are
   defined but never used.

Fix the above by ...

1. Removing the reset source 'AOTAG' from the tegra30_reset_sources
   because this is only applicable for Tegra210.
2. Adding a new tegra210_reset_sources structure for Tegra210 reset
   sources.
3. Correct the number of reset sources for Tegra210 and Tegra186 by
   using the ARRAY_SIZE macro.
4. Updating the functions reset_reason_show() and reset_level_show()
   to check whether the value read is valid. While we are at it
   clean-up these functions to remove an unnecessary u32 variable.

Fixes: 5f84bb1a40 ("soc/tegra: pmc: Add sysfs entries for reset info")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-17 10:30:08 +02:00
Neil Armstrong bb1dca3a39 soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
The Amlogic G12A SoC has a very similar VPU Power Controller setup
than the older GXBB, GXL & GXm SoCs.

This patch adds the variant support for G12A.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-04-16 11:09:53 -07:00
Neil Armstrong 2fe3b4bbc9 soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
The register bitmask to power on/off the VPU memories was incorectly set
to 0x2 instead of 0x3. While still working, let's use the recommended
vendor value instead.

Fixes: 75fcb5ca4b ("soc: amlogic: add Meson GX VPU Domains driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-04-16 11:09:17 -07:00
Nathan Chancellor 89e28da828 soc: mediatek: pwrap: Zero initialize rdata in pwrap_init_cipher
When building with -Wsometimes-uninitialized, Clang warns:

drivers/soc/mediatek/mtk-pmic-wrap.c:1358:6: error: variable 'rdata' is
used uninitialized whenever '||' condition is true
[-Werror,-Wsometimes-uninitialized]

If pwrap_write returns non-zero, pwrap_read will not be called to
initialize rdata, meaning that we will use some random uninitialized
stack value in our print statement. Zero initialize rdata in case this
happens.

Link: https://github.com/ClangBuiltLinux/linux/issues/401
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-04-12 21:57:49 +02:00
Fabien Parent 45a0686b91 soc: mediatek: pwrap: add support for MT8516 pwrap
Add the code to support the pwrap IP on the MediaTek MT8516 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-04-12 19:42:59 +02:00
Fabien Parent a51f4c031d soc: mediatek: pwrap: add missing check on rstc
The variable rstc is set only when the SoC PWRAP have the
PWRAP_CAP_RESET capability. Check whether rstc is set before
using it to avoid errors.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2019-04-12 19:42:41 +02:00
Douglas Anderson bbdc00a7de soc: rockchip: Set the proper PWM for rk3288
The rk3288 SoC has two PWM implementations available, the "old"
implementation and the "new" one.  You can switch between the two of
them by flipping a bit in the grf.

The "old" implementation is the default at chip power up but isn't the
one that's officially supposed to be used.  ...and, in fact, the
driver that gets selected in Linux using the rk3288 device tree only
supports the "new" implementation.

Long ago I tried to get a switch to the right IP block landed in the
PWM driver (search for "rk3288: Switch to use the proper PWM IP") but
that got rejected.  In the mean time the grf has grown a full-fledged
driver that already sets other random bits like this.  That means we
can now get the fix landed.

For those wondering how things could have possibly worked for the last
4.5 years, folks have mostly been relying on the bootloader to set
this bit.  ...but occasionally folks have pointed back to my old patch
series [1] in downstream kernels.

[1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1391597.html

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11 13:40:32 +02:00
Anson Huang 9f735c4e94 soc: imx: gpcv2: use devm_platform_ioremap_resource() to simplify code
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11 15:16:44 +08:00
Anson Huang ccc1de31ab soc: imx: gpc: use devm_platform_ioremap_resource() to simplify code
Use the new helper devm_platform_ioremap_resource() which wraps the
platform_get_resource() and devm_ioremap_resource() together, to
simplify the code.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11 15:16:39 +08:00
Maulik Shah bbeac60f06 drivers: soc: qcom: rpmh-rsc: Correct check for slot number
The return index value from bitmap_find_next_zero_area can be higher
than available slot. So correct the check to return error in such case.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <agross@kernel.org>
2019-04-09 23:40:09 -05:00
Keerthy 5a99ae0092 soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support
During RTC-only suspend, power is lost to the wkup domain, so we need to
save and restore the state of that domain. We also need to store some
information within the RTC registers so that u-boot can do the right thing
at powerup.

The state is entered by getting the RTC to bring the pmic_power_en line low
which will instruct the PMIC to disable the appropriate power rails after
putting DDR into self-refresh mode. To bring pmic_power_en low, we need to
get an ALARM2 event. Since we are running from SRAM at that point, it means
calculating what the next second is (via ASM) and programming that into the
RTC. This patch also adds support for wake up source detection.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08 10:39:01 -07:00
Keerthy 1c6c035450 soc: ti: pm33xx: Move the am33xx_push_sram_idle to the top
Move the am33xx_push_sram_idle function to the top as a preparation
for rtc+ddr mode as the function will be called by multiple functions
currently present before it.

No functional changes.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-08 10:39:01 -07:00
Dan Carpenter 5674a92ca4 soc/fsl/qe: Fix an error code in qe_pin_request()
We forgot to set "err" on this error path.

Fixes: 1a2d397a6e ("gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
2019-04-02 18:02:48 -05:00
Dan Carpenter 93b2605280 soc: qcom: cmd-db: Fix an error code in cmd_db_dev_probe()
The memremap() function doesn't return error pointers, it returns NULL.
This code is returning "ret = PTR_ERR(NULL);" which is success, but it
should return -ENOMEM.

Fixes: 312416d917 ("drivers: qcom: add command DB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-03-27 23:32:26 -05:00
Chris Lew 9324df5817 soc: qcom: qmi: Change txn wait to non-interruptible
Current QMI clients are not userspace facing, if their threads are
signaled, they do not do any signal checking or propagate the
ERESTARTSYS return code up. Remove the interruptible option so clients
can finish their QMI transactions even if the thread is signaled.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-03-27 23:32:26 -05:00