Commit Graph

1377 Commits

Author SHA1 Message Date
Ariel D'Alessandro 7c25f8c9f6 watchdog: NXP LPC18xx Watchdog Timer Driver
This commit adds support for the watchdog timer found in NXP LPC SoCs
family, which includes LPC18xx/LPC43xx. Other SoCs in that family may
share the same watchdog hardware.

Watchdog driver registers a restart handler that will restart the system
by performing an incorrect feed after ensuring the watchdog is enabled in
reset mode.

As watchdog cannot be disabled in hardware, driver's stop routine will
regularly send a keepalive ping using a timer.

Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09 21:35:59 +02:00
Uwe Kleine-König 4f2d0b2d1b watchdog: gpio-wdt: ping already at startup for always running devices
During probe for an always-running watchdog a timer is setup to
constantly ping the watchdog while the device is not open. The gpio to
ping the watchdog is setup to inactive.

For a watchdog with hw_algo = "toggle" this results in a ping depending
on the initial state of the gpio, for hw_algo = "level" no ping is
generated.

Make sure that the first automatic ping is sent immediately and not only
when the timer expires the first time. This makes the machine survive in
case more than half of the watchdog timeout is already elapsed. (Which
is very probable for the chip I'm faced with that has a timeout of one
second.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09 21:35:37 +02:00
Uwe Kleine-König 0a0a542f6b watchdog: gpio-wdt: be more strict about hw_algo matching
strncmp(algo, "toggle", 6) doesn't compare the trailing '\0' byte, so
using

	hw_algo = "toggleboggle"

is recognized the same way as

	hw_algo = "toggle"

. While this doesn't introduce any problems for a device tree that
sticks to the documented settings it's still ugly.

Fix this by using strcmp to only match on "toggle" and "level".

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09 21:35:14 +02:00
Guenter Roeck fa928ee8d4 watchdog: booke_wdt: Use infrastructure to check timeout limits
The watchdog infrastructure checks the maximum timeout for us.
Use it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09 21:34:34 +02:00
Vivien Didelot 64307b48f7 watchdog: (nv_tco) add support for MCP79
Tested on the Nvidia chipset with an SMBus controller PCI ID 0x0AA2
(as shown in the PCI listing during the boot sequence).

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09 21:34:24 +02:00
Francesco Lavra 0919e44451 watchdog: sunxi: fix activation of system reset
Commit f2147de334 ("watchdog: sunxi: support parameterized compatible
strings") introduced a regression in sunxi_wdt_start(), by which
the system reset function of the watchdog is not enabled upon
starting the watchdog. As a result, the system is not reset when the
watchdog expires. Fix it.

Fixes: f2147de334 ("watchdog: sunxi: support parameterized compatible strings")
Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable@vger.kernel.org
2015-09-09 21:34:14 +02:00
Greta Zhang 5724485b18 watchdog: mtk_wdt: add wdt shutdown callback to disable wdt if enabled
Without .shutdown(), watchdog might reset the system during power off.
For example, if watchdog's timeout is set to 30s, then it is reset to
zero by mtk_wdt_ping(). During power off, no app will ping watchdog,
but watchdog is still running and may trigger reset.

Signed-off-by: Greta Zhang <greta.zhang@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09 21:34:02 +02:00
Greta Zhang 9fab06920c watchdog: mtk_wdt: add suspend/resume support
add mediatek watchdog driver suspend/resume support

Signed-off-by: Greta Zhang <greta.zhang@mediatek.com>
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09 21:33:56 +02:00
Ezequiel Garcia 8a340dbbc4 watchdog: imgpdc: Unregister restart handler on remove
Commit c631f20068 ("watchdog: imgpdc: Add reboot support") introduced
a restart handler but forgot to unregister it on driver removal. Fix it.

Fixes: c631f20068 ("watchdog: imgpdc: Add reboot support")
Reported-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-09-09 21:33:41 +02:00
Linus Torvalds 8bd8fd0a29 - New Device Support
- New Clocksource driver from ST
    - New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms
    - Add support for Arizona WM8998 and WM1814
    - Add support for Dialog Semi DA9062 and DA9063
    - Add support for Kontron COMe-bBL6 and COMe-cBW6
    - Add support for X-Powers AXP152
    - Add support for Atmel, many
    - Add support for STMPE, many
    - Add support for USB in X-Powers AXP22X
 
  - Core Frameworks
    - New Base API to traverse devices and their children in reverse order
 
  - Bug Fixes
    - Fix race between runtime-suspend and IRQs
    - Obtain platform data form more reliable source
 
  - Fix-ups
    - Constifying things
    - Variable signage changes
    - Kconfig depends|selects changes
    - Make use of BIT() macro
    - Do not supply .owner attribute in *_driver structures
    - MAINTAINERS entries
    - Stop using set_irq_flags()
    - Start using irq_set_chained_handler_and_data()
    - Export DT device ID structures
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6FCRAAoJEFGvii+H/HdhO2MP/1GxcbbywMXU4goj40gJaYfx
 kk0zH0S7i8+A8hD7SoCIQNkWN5o7i6sNYUA6sCTnPqixbyrkduWCyid1XsATu+41
 iiKEGyiCRyEHhCwnwCXvaFhpAZBzDi7FKj6hhf6nnRMHSEqwrs2aBqWgzNrOZTs0
 u66i/JHccnDdfHHm9Y7XcKMA8pWVqRMnwwaHreuYTFqfrEB0UGCYpmEeEBynGVKh
 MUGC0lCUrEKp59aOexZRtBUla/5BeALJd//vMQtf/+D0YPvE8lppDNwkgCe4buXN
 ZlNHDQooIWIiZfTj7wbHaTWjrBK7MsOEHWBUjNsk2nyDvDOJoGhTrSdJwPeyhUSh
 d2eUyW6sPEQY21XPwuD0DhfRKYKLOzVRhIcxvjlRAq9QHDWVXKyIlf3M70fculK8
 5FN1Wb6Sc2h0OvMC5RemPpxMwZSq6Ks3XANa718Ju802TGK/xk6iRqhZrEut/qrN
 rLYsU84TLUz6YindozTiI5FrGo+zSp9OlUU4z7HUh+4t3H5/opdsRjRp0ICwgIbY
 NxAmsk2d/vJ7xX7FAAjwMY2rPIC0zIksbGEe1AJweWV455EcDMaBM1/e9zDzHciI
 TXVxbzs3DFBadtQWlLv/VkwZmt43MTI8g6ozTTJJkPQNCKThtz4bvDSu8rQWqFua
 bkbRyQroraX5fM0Q3HIs
 =2blS
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Device Support:
   - New Clocksource driver from ST
   - New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms
   - Add support for Arizona WM8998 and WM1814
   - Add support for Dialog Semi DA9062 and DA9063
   - Add support for Kontron COMe-bBL6 and COMe-cBW6
   - Add support for X-Powers AXP152
   - Add support for Atmel, many
   - Add support for STMPE, many
   - Add support for USB in X-Powers AXP22X

  Core Frameworks:
   - New Base API to traverse devices and their children in reverse order

  Bug Fixes:
   - Fix race between runtime-suspend and IRQs
   - Obtain platform data form more reliable source

  Fix-ups:
   - Constifying things
   - Variable signage changes
   - Kconfig depends|selects changes
   - Make use of BIT() macro
   - Do not supply .owner attribute in *_driver structures
   - MAINTAINERS entries
   - Stop using set_irq_flags()
   - Start using irq_set_chained_handler_and_data()
   - Export DT device ID structures"

* tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: jz4740-adc: Init mask cache in generic IRQ chip
  mfd: cros_ec: spi: Add OF match table
  mfd: stmpe: Add OF match table
  mfd: max77686: Split out regulator part from the DT binding
  mfd: Add DT binding for Maxim MAX77802 IC
  mfd: max77686: Use a generic name for the PMIC node in the example
  mfd: max77686: Don't suggest in binding to use a deprecated property
  mfd: Add MFD_CROS_EC dependencies
  mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers
  mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs
  mfd: axp20x: Add missing registers, and mark more registers volatile
  mfd: arizona: Fixup some formatting/white space errors
  mfd: wm8994: Fix NULL pointer exception on missing pdata
  of: Add vendor prefix for Nuvoton
  mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event
  mfd: atmel-hlcdc: Add support for new SoCs
  mfd: Export OF module alias information in missing drivers
  mfd: stw481x: Export I2C module alias information
  mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
  mfd: max899x: Avoid redundant irq_data lookup
  ...
2015-09-04 11:35:03 -07:00
Matt Fleming 2a7a0e9bf7 watchdog: iTCO_wdt: Add support for TCO on Intel Sunrisepoint
The revision of the watchdog hardware in Sunrisepoint necessitates a new
"version" inside the TCO watchdog driver because some of the register
layouts have changed.

Also update the Kconfig entry to select both the LPC and SMBus drivers
since the TCO device is on the SMBus in Sunrisepoint.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11 15:03:52 +01:00
Matt Fleming 420b54de25 mfd: watchdog: iTCO_wdt: Expose watchdog properties using platform data
Intel Sunrisepoint (Skylake PCH) has the iTCO watchdog accessible across
the SMBus, unlike previous generations of PCH/ICH where it was on the
LPC bus. Because it's on the SMBus, it doesn't make sense to pass around
a 'struct lpc_ich_info', and leaking the type of bus into the iTCO
watchdog driver is kind of backwards anyway.

This change introduces a new 'struct itco_wdt_platform_data' for use
inside the iTCO watchdog driver and by the upcoming Intel Sunrisepoint
code, which neatly avoids having to include lpc_ich headers in the i801
i2c driver.

This change is overdue because lpc_ich_info has already found its way
into other TCO watchdog users, notably the intel_pmc_ipc driver where
the watchdog actually isn't on the LPC bus as far as I can see.

A simple translation layer is provided for converting from the existing
'struct lpc_ich_info' inside the lpc_ich mfd driver.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com> [drivers/x86 refactoring]
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11 15:03:21 +01:00
Greg Kroah-Hartman f368ed6088 char: make misc_deregister a void function
With well over 200+ users of this api, there are a mere 12 users that
actually checked the return value of this function.  And all of them
really didn't do anything with that information as the system or module
was shutting down no matter what.

So stop pretending like it matters, and just return void from
misc_deregister().  If something goes wrong in the call, you will get a
WARNING splat in the syslog so you know how to fix up your driver.
Other than that, there's nothing that can go wrong.

Cc: Alasdair Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05 10:35:49 -07:00
Viresh Kumar da89947b47 Update Viresh Kumar's email address
Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-17 16:39:53 -07:00
Linus Torvalds 93899e39e8 Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
 "This contains:

   - new driver for ST's LPC Watchdog
   - new driver for Conexant Digicolor CX92755 SoC
   - new driver for DA9062 watchdog
   - Addition of the watchdog registration deferral mechanism
   - several improvements on omap_wdt
   - several improvements and reboot-support for imgpdc_wdt
   - max63xx_wdt improvements
   - imx2_wdt improvements
   - dw_wdt improvements
   - and other small improvements and fixes"

* git://www.linux-watchdog.org/linux-watchdog: (37 commits)
  watchdog: omap_wdt: early_enable module parameter
  watchdog: gpio_wdt: Add option for early registration
  watchdog: watchdog_core: Add watchdog registration deferral mechanism
  watchdog: max63xx: dynamically allocate device
  watchdog: imx2_wdt: Disable previously acquired clock on error path
  watchdog: imx2_wdt: Check for clk_prepare_enable() error
  watchdog: hpwdt: Add support for WDIOC_SETOPTIONS
  watchdog: docs: omap_wdt also understands nowayout
  watchdog: omap_wdt: implement get_timeleft
  watchdog: da9062: DA9062 watchdog driver
  watchdog: imx2_wdt: set watchdog parent device
  watchdog: mena21_wdt: Fix possible NULL pointer dereference
  watchdog: dw_wdt: keepalive the watchdog at write time
  watchdog: dw_wdt: No need for a spinlock
  watchdog: imx2_wdt: also set wdog->timeout to new_timeout
  watchdog: Allow compile test of GPIO consumers if !GPIOLIB
  watchdog: cadence: Add dependency on HAS_IOMEM
  watchdog: max63xx_wdt: Constify platform_device_id
  watchdog: MAX63XX_WATCHDOG does not depend on ARM
  watchdog: imgpdc: Add some documentation about the timeout
  ...
2015-07-01 19:33:16 -07:00
Lars Poeschel b2102eb36e watchdog: omap_wdt: early_enable module parameter
Add a early_enable module parameter to the omap_wdt that starts the
watchdog on module insertion. The default value is 0 which does not
start the watchdog - which also does not change the behavior if the
parameter is not given.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-07-01 16:43:17 +02:00
Jean-Baptiste Theou 5e53c8ed81 watchdog: gpio_wdt: Add option for early registration
In some situation, mainly when it's not possible to disable a
watchdog, you may want the watchdog driver to be started as soon
as possible.

Adding GPIO_WATCHDOG_ARCH_INITCALL to raise initcall from
module_init to arch_initcall.

This patch require watchdog registration deferral mechanism

Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29 11:51:08 +02:00
Jean-Baptiste Theou ef90174f82 watchdog: watchdog_core: Add watchdog registration deferral mechanism
Currently, watchdog subsystem require the misc subsystem to
register a watchdog. This may not be the case in case of an
early registration of a watchdog, which can be required when
the watchdog cannot be disabled.

This patch introduces a deferral mechanism to remove this requirement.

Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29 11:51:06 +02:00
Vivien Didelot b9be9660ba watchdog: max63xx: dynamically allocate device
This patch removes the static watchdog device for a new max63xx_wdt data
structure, and constifies the max63xx_timeout data.

The new structure contains pointers to pin access routines, which
abstracts mmap-specific code. This will ease future accesses like GPIO.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-29 11:50:53 +02:00
Linus Torvalds 4aa705b18b ARM: SoC: platform support for v4.2
Our SoC branch usually contains expanded support for new SoCs and
 other core platform code. Some highlights from this round:
 
 - sunxi: SMP support for A23 SoC
 - socpga: big-endian support
 - pxa: conversion to common clock framework
 - bcm: SMP support for BCM63138
 - imx: support new I.MX7D SoC
 - zte: basic support for ZX296702 SoC
 
  Conflicts:
 	arch/arm/mach-socfpga/core.h
 
 Trivial remove/remove conflict with our cleanup branch.
 Resolution: remove both sides
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi4RMAAoJEFk3GJrT+8Zl6/kP/1Rv9O++1Kxua6R54Og6AF1J
 0miFr2fnUrUWUYg/NVbseRH5bBe6N6ir3SQMfde8W2/QibEjOoEwSwrle+mC/eiq
 CE0x0gtyRvXMrMU/FWkOvbmmw9uv5oz1z3IHZV6AiecNuSMLUBPfamryikQ8C+d1
 O/QZtX543tJQJDOBihO5cuhoVVM37UX0unNmqGsyswlyqTPF8FxcIJAYVNtnxjmj
 AFaOB0nDJKLKFTiX2Ype2wOxxJX1lrLatNo4W4T+YaaK+i1uCOhgTdSN+n49K7YA
 KNDFEgZFQqT8VMJyG+eJVeYF+cI7yWQ7lBzIftPUjPk/7+dIHBjWPz2QdjVz3U38
 kxncf4S9xGAF5G2rcKe4mFrfT3Y8QLWQpA/jFs06yLwW1O3Hlfq3DzMdGNcF7hth
 17LOP8namn9+NepZEp/vAlFzRRypxWWtbkPNBIItkImC6zn0IiGjBy50DE1io27W
 hmQcnMb7d+0wWl2Y8OmR2lZSB97JiRZkRYMCVHVt+0zGJzp4prLvl9wbjh1VXkPv
 ERCDJ9nCmZsl7ZVmIXMI7KNXYuPNp7R/QAzCvuSUueswF0qxTAQ0VSSBwRMqvQsQ
 UUNC6p63VnjUeMUdn2EBsUQZ0Uqw3t2U5TtvooHNt9FkiGsSpwjWrvVD+LItaPoJ
 GPeeJrJaYQsDvTrO8wjU
 =ZtPK
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform support updates from Kevin Hilman:
 "Our SoC branch usually contains expanded support for new SoCs and
  other core platform code.  Some highlights from this round:

   - sunxi: SMP support for A23 SoC
   - socpga: big-endian support
   - pxa: conversion to common clock framework
   - bcm: SMP support for BCM63138
   - imx: support new I.MX7D SoC
   - zte: basic support for ZX296702 SoC"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (134 commits)
  ARM: zx: Add basic defconfig support for ZX296702
  ARM: dts: zx: add an initial zx296702 dts and doc
  clk: zx: add clock support to zx296702
  dt-bindings: Add #defines for ZTE ZX296702 clocks
  ARM: socfpga: fix build error due to secondary_startup
  MAINTAINERS: ARM64: EXYNOS: Extend entry for ARM64 DTS
  ARM: ep93xx: simone: support for SPI-based MMC/SD cards
  MAINTAINERS: update Shawn's email to use kernel.org one
  ARM: socfpga: support suspend to ram
  ARM: socfpga: add CPU_METHOD_OF_DECLARE for Arria 10
  ARM: socfpga: use CPU_METHOD_OF_DECLARE for socfpga_cyclone5
  ARM: EXYNOS: register power domain driver from core_initcall
  ARM: EXYNOS: use PS_HOLD based poweroff for all supported SoCs
  ARM: SAMSUNG: Constify platform_device_id
  ARM: EXYNOS: Constify irq_domain_ops
  ARM: EXYNOS: add coupled cpuidle support for Exynos3250
  ARM: EXYNOS: add exynos_get_boot_addr() helper
  ARM: EXYNOS: add exynos_set_boot_addr() helper
  ARM: EXYNOS: make exynos_core_restart() less verbose
  ARM: EXYNOS: fix exynos_boot_secondary() return value on timeout
  ...
2015-06-26 11:34:35 -07:00
Fabio Estevam db11cba205 watchdog: imx2_wdt: Disable previously acquired clock on error path
If watchdog_register_device() fails we should disable the previously
acquired wdev->clk clock on error path.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-26 10:41:18 +02:00
Fabio Estevam aefb163cb2 watchdog: imx2_wdt: Check for clk_prepare_enable() error
clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-26 10:41:11 +02:00
Jean Delvare 46c80b20d0 watchdog: hpwdt: Add support for WDIOC_SETOPTIONS
WDIOC_SETOPTIONS makes it possible to disable and re-enable the
watchdog timer while the hpwdt driver is loaded.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:36 +02:00
Lars Poeschel 452fafed83 watchdog: omap_wdt: implement get_timeleft
The omap watchdog hardware is able to read the watchdog timer counter
register. This implements this functionality in the omap_wdt driver, so
one is can read the time until the watchdog will trigger the reset in
seconds using WDIOC_GETTIMELEFT.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:35 +02:00
S Twiss 7a7cb009dc watchdog: da9062: DA9062 watchdog driver
Add watchdog driver support for DA9062

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:34 +02:00
Vladimir Zapolskiy 8135193ceb watchdog: imx2_wdt: set watchdog parent device
If on watchdog device registration a parent device is not set, then
the registered watchdog is considered to be a virtual device:

  /sys/devices/virtual/watchdog/watchdog0
  /sys/devices/virtual/watchdog/watchdog1

Setting a correct reference to a platform device allows to
distinguish multiple instances of iMX2+ hardware watchdogs:

  /sys/devices/soc0/soc/2000000.aips-bus/20bc000.wdog/watchdog/watchdog0
  /sys/devices/soc0/soc/2000000.aips-bus/20c0000.wdog/watchdog/watchdog1

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:33 +02:00
Johannes Thumshirn 57337db1b9 watchdog: mena21_wdt: Fix possible NULL pointer dereference
In a21_wdt_remove() we do a watchdog_unregister_device() on struct
a21_wdt_drv->wdt but never assign it.

Also move the dev_set_drvdata() call in front of the watchdog_register_device()
call, so it doesn't look like an error.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:32 +02:00
Doug Anderson 04b1a62e6b watchdog: dw_wdt: keepalive the watchdog at write time
If you've got code that does this in a tight loop
  1. Open watchdog
  2. Send 'expect close'
  3. Close watchdog
...you'll eventually trigger a watchdog reset.  You can reproduce this
by using daisydog (1) and running:
  while true; do daisydog -c > /dev/null; done

The problem is that each time you write to the watchdog for 'expect
close' it moves the timer .5 seconds out.  The timer thus never fires
and never pats the watchdog for you.

1: http://git.chromium.org/gitweb/?p=chromiumos/third_party/daisydog.git

Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:31 +02:00
Doug Anderson 7fb466a7a7 watchdog: dw_wdt: No need for a spinlock
Right now the dw_wdt uses a spinlock to protect dw_wdt_open().  The
problem is that while holding the spinlock we call:
-> dw_wdt_set_top()
   -> dw_wdt_top_in_seconds()
      -> clk_get_rate()
         -> clk_prepare_lock()
            -> mutex_lock()

Locking a mutex while holding a spinlock is not allowed and leads to
warnings like "BUG: spinlock wrong CPU on CPU#1", among other
problems.

There's no reason to use a spinlock.  Only dw_wdt_open() was protected
and the test_and_set_bit() at the start of that function protects us
anyway.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:31 +02:00
Michael Grzeschik 30dd4a8f08 watchdog: imx2_wdt: also set wdog->timeout to new_timeout
Commit faad5de0b1 ("watchdog: imx2_wdt: convert to watchdog core api")
removes the custom ioctl function. The generic ioctl handler is not
setting the wdog->timeout to the new_timeout but handing this preset
value back to the userspace. This patch sets the new value in the
drivers set_timeout function to fix that problem.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:25 +02:00
Geert Uytterhoeven 21a926a340 watchdog: Allow compile test of GPIO consumers if !GPIOLIB
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
2015-06-22 15:54:24 +02:00
Richard Weinberger 6960d4851f watchdog: cadence: Add dependency on HAS_IOMEM
Not all architectures have io memory.

Fixes:
drivers/built-in.o: In function `cdns_wdt_probe':
cadence_wdt.c:(.text+0x33b7c9): undefined reference to `devm_ioremap_resource'

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:23 +02:00
Krzysztof Kozlowski 8c7c72c9bc watchdog: max63xx_wdt: Constify platform_device_id
The platform_device_id is not modified by the driver and core uses it as
const.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:22 +02:00
Vivien Didelot 04658449dc watchdog: MAX63XX_WATCHDOG does not depend on ARM
Remove the ARM Kconfig dependency since the Maxim MAX63xx devices are
architecture independent.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:21 +02:00
Ezequiel Garcia c1f263878e watchdog: imgpdc: Add some documentation about the timeout
This watchdog hardware can be configured in terms of power-of-two
clock cycles. Therefore, the watchdog timeout configured by the user
will be rounded-up to the next possible hardware timeout.

This commit adds a comment explaining this.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:15 +02:00
Ezequiel Garcia deb8d50eb4 watchdog: imgpdc: Fix max timeout
Maximum timeout is currently set in clock cycles, but the watchdog
core expects it to be in seconds. Fix it.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:15 +02:00
Andrew Bresticker c631f20068 watchdog: imgpdc: Add reboot support
Register a restart handler that will restart the system by writing
to the watchdog's SOFT_RESET register.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:14 +02:00
Andrew Bresticker 8aa453a533 watchdog: imgpdc: Set timeout before starting watchdog
Set up the watchdog for the specified timeout before attempting to start it.

Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:13 +02:00
Andrew Bresticker 7094e1dd2b watchdog: imgpdc: Allow timeout to be set in device-tree
Since the heartbeat is statically initialized to its default value,
watchdog_init_timeout() will never look in the device-tree for a
timeout-sec value.  Instead of statically initializing heartbeat,
fall back to the default timeout value if watchdog_init_timeout()
fails.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:12 +02:00
Uwe Kleine-König 530c11d432 watchdog: omap: assert the counter being stopped before reprogramming
The omap watchdog has the annoying behaviour that writes to most
registers don't have any effect when the watchdog is already running.
Quoting the AM335x reference manual:

	To modify the timer counter value (the WDT_WCRR register),
	prescaler ratio (the WDT_WCLR[4:2] PTV bit field), delay
	configuration value (the WDT_WDLY[31:0] DLY_VALUE bit field), or
	the load value (the WDT_WLDR[31:0] TIMER_LOAD bit field), the
	watchdog timer must be disabled by using the start/stop sequence
	(the WDT_WSPR register).

Currently the timer is stopped in the .probe callback but still there
are possibilities that yield to a situation where omap_wdt_start is
entered with the timer running (e.g. when /dev/watchdog is closed
without stopping and then reopened). In such a case programming the
timeout silently fails!

To circumvent this stop the timer before reprogramming.

Assuming one of the first things the watchdog user does is setting the
timeout explicitly nothing too bad should happen because this explicit
setting works fine.

Fixes: 7768a13c25 ("[PATCH] OMAP: Add Watchdog driver support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:07 +02:00
Uwe Kleine-König 0b3330f310 watchdog: omap: simplify assignment of bootstatus
Instead of using an over-long expression involving the ?: operator use
an if and instead of an else branch rely on the fact that the data
structure was allocated using devm_kzalloc. This also allows to put the
used helper variable into a more local scope.

There is no functional change.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:06 +02:00
Uwe Kleine-König d2f78268ba watchdog: omap: put struct watchdog_device into driver data
This way only a single allocation is needed (per device). Also this
simplifies the data structure used by the driver because there is no
need anymore to link from one struct to the other (by means of
watchdog_{set,get}_drvdata).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:05 +02:00
Uwe Kleine-König a4f741e3e1 watchdog: omap: use watchdog_init_timeout instead of open coding it
Instead of (partly) open coding watchdog_init_timeout to determine the
inital timeout use the core function that exists for exactly this
purpose.

As a side effect the "timeout-sec" device-tree property is recognized now
(though currently unused in the omap device trees).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:54:04 +02:00
Baruch Siach 336694a01d watchdog: digicolor: driver for Conexant Digicolor CX92755 SoC
This commit add a driver for the watchdog functionality of the Conexant CX92755
SoC, from the Digicolor series of SoCs. Of 8 system timers provided by the
CX92755, the first one, timer A, can reset the chip when its counter reaches
zero. This driver uses this capability to provide userspace with a standard
watchdog, using the watchdog timer driver core framework. This driver also
implements a reboot handler for the reboot(2) system call.

The watchdog driver shares the timer registers with the CX92755 timer driver
(drivers/clocksource/timer-digicolor.c). The timer driver, however, uses only
timers other than A, so both drivers should coexist.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:53:59 +02:00
Ben Dooks feccebe9a9 watchdog: at91sam9: use endian agnostic IO
Use endian agnostic IO functions for the watchdog driver for when it
is enabled on ATSAMA5D36 devices running in big endian.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:53:57 +02:00
Lee Jones 79cb097676 watchdog: st_wdt: Update IP layout information to include Clocksource
Initial submission adding support for this IP only included Watchdog and
the Real-Time Clock.  Now the third (and final) device is enabled this
trivial patch is required to update the comment in the Watchdog driver
to encompass Clocksource.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:53:52 +02:00
Lee Jones f27925a6c1 watchdog: st_wdt: Add new driver for ST's LPC Watchdog
Signed-off-by: David Paris <david.paris@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22 15:53:51 +02:00
Eric Anholt 33a9f5bc15 ARM: bcm2835: Move the restart/power_off handling to the WDT driver
Since the WDT is what's used to drive restart and power off, it makes
more sense to keep it there, where the regs are already mapped and
definitions for them provided.  Note that this means you may need to
add CONFIG_BCM2835_WDT to retain functionality of your kernel.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-05-14 10:04:19 +01:00
Lee Jones 49ae77905c watchdog: st_wdt: Add new driver for ST's LPC Watchdog
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David Paris <david.paris@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-04-30 13:21:28 +01:00
Linus Torvalds 7dcca3e92a Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
 "This contains following changes:

   - Octeon: convert to watchdog-API and apply some fixes
   - Cadence wdt: remove dependency on ARCH
   - add DT bindings for qcom + msm
   - bcm281xx: Remove use of seq_printf return value
   - stmp3xxx_rtc_wdt + pnx4008_wdt: fix broken email addresses"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: stmp3xxx_rtc_wdt: fix broken email address
  watchdog: pnx4008_wdt: fix broken email address
  watchdog: octeon: use fixed length string for register names
  watchdog: octeon: fix some trivial coding style issues
  watchdog: octeon: convert to WATCHDOG_CORE API
  watchdog: cadence: Remove Kconfig dependency on ARCH
  ARM: msm: add watchdog entries to DT timer binding doc
  ARM: qcom: add description of KPSS WDT for IPQ8064
  watchdog: qcom: use timer devicetree binding
  watchdog: bcm281xx: Remove use of seq_printf return value
2015-04-22 11:22:55 -07:00
Linus Torvalds 7d2b6ef19c ARM: SoC driver updates for v4.1
Driver updates for v4.1. Some of these are for drivers/soc, where we find more
 and more SoC-specific drivers these days. Some are for other driver subsystems
 where we have received acks from the appropriate maintainers.
 
 The larger parts of this branch are:
 
 - MediaTek support for their PMIC wrapper interface, a high-level interface
   for talking to the system PMIC over a dedicated I2C interface.
 - Qualcomm SCM driver has been moved to drivers/firmware. It's used for CPU
   up/down and needs to be in a shared location for arm/arm64 common code.
 - Cleanup of ARM-CCI PMU code.
 - Anoter set of cleanusp to the OMAP GPMC code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzKYAAoJEIwa5zzehBx3UJ8P/37OA1Qc5vR/Kyc8WlhPlNFV
 MRE7ajM+FMd/Islt4nVNKATK2o3peCTPrqcniDfdPmN2dM1l4LvdeIvkIhKpB09h
 ovmYTZLI/AIbbkttWybGO4lVpFeATxX5N91XXBHvbqkMh6N6ppiYWZUYeJs9EhAw
 2YKykfDCTjKykS+m4YThXw9SCF/6mkCvaBL2VAuKnoV0ygjQD109Fce/irKaAoyw
 L2w4PXOimUk8RshTx3afKCgTotMS0e9JWjKjvDO5M2KAD8DHm7PDRMmRVzA2sSFG
 E2BCfh2DTjzJjdfRYsTd1bYnWzvakX1CzLjiFv+Sb0ctanoZdiDtJIDpX+vSXZ+D
 W7i0yhEWIrr2qaZOyXR8znw8BhzdVZhmT+O76N47HvzMb5JUkaZBhEUBfUyeDbk+
 YhEwz1G+YxT+fg7bBrxa3vLzOJ2pUwVJPITNuPKr6eZJmaBqgx2M7xXs3KyIJX1Y
 AV9eUs2uNCyonawO6xXRhlUKREKL1TftqNXfLj7MYg6AaoVqK0qNRfuCdhMFhMdN
 88QCl/qpPtIDL6ZnxlOejs30+DCH1QPx6+GhxkUlVlF1j/2ZM0cK2cj3tggDbNvN
 uSy/g5pYDp62Az8UCoNXmKdnb4UONigb7k49naZbW/9CGRp1rrmUdzPUAm0tHMBT
 HsH7ms+nHAZHrAlNvvtP
 =/sWo
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for v4.1.  Some of these are for drivers/soc, where we
  find more and more SoC-specific drivers these days.  Some are for
  other driver subsystems where we have received acks from the
  appropriate maintainers.

  The larger parts of this branch are:

   - MediaTek support for their PMIC wrapper interface, a high-level
     interface for talking to the system PMIC over a dedicated I2C
     interface.

   - Qualcomm SCM driver has been moved to drivers/firmware.  It's used
     for CPU up/down and needs to be in a shared location for arm/arm64
     common code.

   - cleanup of ARM-CCI PMU code.

   - another set of cleanusp to the OMAP GPMC code"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  soc/mediatek: Remove unused variables
  clocksource: atmel-st: select MFD_SYSCON
  soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs
  arm-cci: Fix CCI PMU event validation
  arm-cci: Split the code for PMU vs driver support
  arm-cci: Get rid of secure transactions for PMU driver
  arm-cci: Abstract the CCI400 PMU specific definitions
  arm-cci: Rearrange code for splitting PMU vs driver code
  drivers: cci: reject groups spanning multiple HW PMUs
  ARM: at91: remove useless include
  clocksource: atmel-st: remove mach/hardware dependency
  clocksource: atmel-st: use syscon/regmap
  ARM: at91: time: move the system timer driver to drivers/clocksource
  ARM: at91: properly initialize timer
  ARM: at91: at91rm9200: remove deprecated arm_pm_restart
  watchdog: at91rm9200: implement restart handler
  watchdog: at91rm9200: use the system timer syscon
  mfd: syscon: Add atmel system timer registers definition
  ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  soc: qcom: gsbi: Add support for ADM CRCI muxing
  ...
2015-04-22 09:18:17 -07:00
Wolfram Sang cf82f52d36 watchdog: stmp3xxx_rtc_wdt: fix broken email address
My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.

Reported-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22 15:30:45 +02:00
Wolfram Sang e8cc536657 watchdog: pnx4008_wdt: fix broken email address
My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.

Reported-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22 15:30:41 +02:00
Aaro Koskinen 3a30c07e71 watchdog: octeon: use fixed length string for register names
Use fixed length string for register names. This saves 416 bytes
in text size.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22 15:28:40 +02:00
Aaro Koskinen 8692cf0ad3 watchdog: octeon: fix some trivial coding style issues
Fix some trivial coding style issues to reduce noise from static analyzers.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22 15:28:35 +02:00
Aaro Koskinen 3d588c93c0 watchdog: octeon: convert to WATCHDOG_CORE API
Convert OCTEON watchdog to WATCHDOG_CORE API. This enables support
for multiple watchdogs on OCTEON boards.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22 15:28:31 +02:00
Michal Simek 6290d8c826 watchdog: cadence: Remove Kconfig dependency on ARCH
Remove Kconfig dependency and enable driver for
all ARCHs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22 15:28:21 +02:00
Mathieu Olivari 0dfd582e02 watchdog: qcom: use timer devicetree binding
MSM watchdog configuration happens in the same register block as the
timer, so we'll use the same binding as the existing timer.

The qcom-wdt will now be probed when devicetree has an entry compatible
with "qcom,kpss-timer" or "qcom-scss-timer".

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22 15:27:47 +02:00
Joe Perches e1dbde2960 watchdog: bcm281xx: Remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Guenter Roeck <linux~roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-04-22 15:27:39 +02:00
Linus Torvalds bdfa54dfd9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "The major change in this merge is the removal of the support for
  31-bit kernels.  Naturally 31-bit user space will continue to work via
  the compat layer.

  And then some cleanup, some improvements and bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits)
  s390/smp: wait until secondaries are active & online
  s390/hibernate: fix save and restore of kernel text section
  s390/cacheinfo: add missing facility check
  s390/syscalls: simplify syscall_get_arch()
  s390/irq: enforce correct irqclass_sub_desc array size
  s390: remove "64" suffix from mem64.S and swsusp_asm64.S
  s390/ipl: cleanup macro usage
  s390/ipl: cleanup shutdown_action attributes
  s390/ipl: cleanup bin attr usage
  s390/uprobes: fix address space annotation
  s390: add missing arch_release_task_struct() declaration
  s390: make couple of functions and variables static
  s390/maccess: improve s390_kernel_write()
  s390/maccess: remove potentially broken probe_kernel_write()
  s390/watchdog: support for KVM hypervisors and delete pr_info messages
  s390/watchdog: enable KEEPALIVE for /dev/watchdog
  s390/dasd: remove setting of scheduler from driver
  s390/traps: panic() instead of die() on translation exception
  s390: remove test_facility(2) (== z/Architecture mode active) checks
  s390/cmpxchg: simplify cmpxchg_double
  ...
2015-04-14 20:51:44 -07:00
Rafael J. Wysocki be77002101 Merge back earlier suspend/hibernate material for v4.1. 2015-04-10 12:01:59 +02:00
Olof Johansson 47f36e4921 CCI-400 PMU updates
This series reworks some of the CCI-400 PMU code so that it can be used
 on both ARM and ARM64-based systems, without the need to boot in secure
 mode on the latter. This paves the way for CCI-500 support in future.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJVFWAiAAoJELescNyEwWM0pK8IALUinCT+Ec/Oi5WwGJaLgQgw
 exlDFAcmml0xisxglGL7eHcvNBs/j4wFD37mqDUszrGW3jrM+Ex+/cvUzWIlEyZl
 LjG99ZF2j51LFxDHMgpRwg1aD/NNQsQjwsuHHdCr+NHB5R2C0M4umsgX6Kt6/PE4
 95LOnnjBOx4FkMOG9mZElzldUlqnhWd6drjQ9qZQar9VVVewfbR1LH/xQhjrCL0w
 nwRzJwYj1LnLFO0hBVUAJSfvYltMF9PxBEx0FkyzN7QcuP1tLQ25NmGEvarHP6iZ
 XpvTZ7akzButyUQbvz/kf6a0agPNUv1HHEqh7/Zddvgm//+p8nEBORuJ/cC6g1E=
 =UHCi
 -----END PGP SIGNATURE-----

Merge tag 'arm-perf-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into next/drivers

Merge "arm-cci PMU updates for 4.1" from Will Deacon:

CCI-400 PMU updates

This series reworks some of the CCI-400 PMU code so that it can be used
on both ARM and ARM64-based systems, without the need to boot in secure
mode on the latter. This paves the way for CCI-500 support in future.

* tag 'arm-perf-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
  arm-cci: Fix CCI PMU event validation
  arm-cci: Split the code for PMU vs driver support
  arm-cci: Get rid of secure transactions for PMU driver
  arm-cci: Abstract the CCI400 PMU specific definitions
  arm-cci: Rearrange code for splitting PMU vs driver code
  drivers: cci: reject groups spanning multiple HW PMUs
  + Linux 4.0-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03 13:38:43 -07:00
Rafael J. Wysocki f321c9cbf3 PM / watchdog: iTCO: stop watchdog during system suspend
If the target sleep state of the system is not an ACPI sleep state
(S1, S2 or S3), the TCO watchdog needs to be stopped during system
suspend, because it may not be possible to ping it any more after
timekeeping has been suspended (suspend-to-idle does that for
one example).

For this reason, provide ->suspend_noirq and ->resume_noirq
callbacks for the iTCO watchdog driver and use them to stop
and restart the watchdog during system suspend and resume,
respectively, if the system is not going to enter an ACPI
sleep state (in which case the watchdog will be stopped
by the platform firmware before the state is entered).

Reported-and-tested-by: Borun Fu <borun.fu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-04-03 15:25:04 +02:00
James Hogan ae6ee2fd47 watchdog: imgpdc: Fix default heartbeat
The IMG PDC watchdog driver heartbeat module parameter has no default so
it is initialised to zero. This results in the following warning during
probe:

imgpdc-wdt 2006000.wdt: Initial timeout out of range! setting max timeout

The module parameter description implies that the default value should
be PDC_WDT_DEF_TIMEOUT, which isn't yet used, so initialise it to that.

Also tweak the heartbeat module parameter description for consistency.

Fixes: 93937669e9 ("watchdog: ImgTec PDC Watchdog Timer Driver")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
Cc: Jude Abraham <Jude.Abraham@imgtec.com>
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27 08:47:50 +01:00
James Hogan a629c08fdb watchdog: imgpdc: Fix probe NULL pointer dereference
The IMG PDC watchdog probe function calls pdc_wdt_stop() prior to
watchdog_set_drvdata(), causing a NULL pointer dereference when
pdc_wdt_stop() retrieves the struct pdc_wdt_dev pointer using
watchdog_get_drvdata() and reads the register base address through it.

Fix by moving the watchdog_set_drvdata() call earlier, to where various
other pdc_wdt->wdt_dev fields are initialised.

Fixes: 93937669e9 ("watchdog: ImgTec PDC Watchdog Timer Driver")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
Cc: Jude Abraham <Jude.Abraham@imgtec.com>
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27 08:47:42 +01:00
Dan Carpenter 9ffd906d9a watchdog: mtk_wdt: signedness bug in mtk_wdt_start()
"ret" should be signed for the error handling to work correctly.  This
doesn't matter much in real life since mtk_wdt_set_timeout() always
succeeds.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-03-27 08:47:36 +01:00
Xu Wang b2527d2009 s390/watchdog: support for KVM hypervisors and delete pr_info messages
This patch extends the diag288 watchdog driver to be able to deal with KVM
hypervisors. Only z/VM needs special handling, we can use the same interface
as on LPAR. Remove all pr_info output to avoid misconception. Because there
is no value in these messages and only the pr_err messages make sense.

Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-25 11:49:42 +01:00
Xu Wang 9ec6cb80c8 s390/watchdog: enable KEEPALIVE for /dev/watchdog
There's no reason why we wouldn't want to be able to send a keep alive
message to /dev/watchdog (feed dog) for the s390 diag288 watchdog, so
let's enable the WDIOF_KEEPALIVEPING option.

Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-25 11:49:41 +01:00
Alexandre Belloni 9ab45f3fb2 watchdog: at91rm9200: implement restart handler
Restarting the at91rm9200 is done through programming the watchdog and waiting
for it to reset.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:02 +01:00
Alexandre Belloni 8432f9e5e8 watchdog: at91rm9200: use the system timer syscon
Use a syscon regmap to access the system timer registers.

Also, rename the driver atmel_st_watchdog to stop conflicting with
at91sam9_wdt.c

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16 17:03:01 +01:00
Boris BREZILLON d677772e13 watchdog: at91sam9: request the irq with IRQF_NO_SUSPEND
The watchdog interrupt (only used when activating software watchdog)
shouldn't be suspended when entering suspend mode, because it is shared
with a timer device (which request the line with IRQF_NO_SUSPEND) and once
the watchdog "Mode Register" has been written, it cannot be changed (which
means we cannot disable the watchdog interrupt when entering suspend).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-06 00:46:31 +01:00
Rafał Miłecki 9461343161 watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch
BCM5301X (ARCH_BCM_5301X) is a new Broadcom architecture using the same
SoC bus driver (bcma) as BCM47XX but based on ARM instead of MIPS.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:34:13 +01:00
Zubair Lutfullah Kakakhel 6b96c72279 watchdog: jz4740: Add DT support
Add DT support to the jz4740 driver. Simple of_match_ptr. No other
modification for probe needed

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:34:09 +01:00
Doug Anderson b5ade9bc8d watchdog: dw_wdt: Try to get a 30 second watchdog by default
The dw_wdt_set_top() function takes in a value in seconds.  In
dw_wdt_open() we were calling it with a value that's supposed to
represent the maximum value programmed into the "top" register with a
comment saying that we were trying to set the watchdog to its maximum
value.  Instead we ended up setting the watchdog to ~15 seconds.

Let's fix this.  However, setting things to the "max" gives me an 86
second watchdog in the system I'm looking at.  86 seconds feels a
little too long.  We'll explicitly choose 30 seconds as a more
reasonable value.

NOTE: Ideally this driver should be transitioned to be a real watchdog
driver.  Then we could use "watchdog_init_timeout" and let the timeout
be specified in a number of ways (device tree, module parameter, etc).
This patch should be considered a bit of a stopgap solution.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:49 +01:00
Doug Anderson a00850107e watchdog: dw_wdt: pat the watchdog before enabling it
On some dw_wdt implementations the "top" register may be initted to 0
at bootup.  In such a case, each "pat" of the watchdog will reset the
timer to 0xffff.  That's pretty short.

The input clock of the wdt can be any of a wide range of values.  On
an rk3288 system, I've seen the wdt clock be 24.75 MHz.  That means
each tick is ~40ns and we'll count to 0xffff in ~2.6ms.

Because of the above two facts, it's a really good idea to pat the
watchdog after initting the "top" register properly and before
enabling the watchdog.  If you don't then there's no way we'll get the
next heartbeat in time.

Jisheng Zhang fixed this problem on some dw_wdt versions by using the
TOP_INIT feature.  However, the dw_wdt on rk3288 doesn't have TOP_INIT
so it's a good idea to also pat the watchdog manually.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:43 +01:00
Guenter Roeck a77841d59e watchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792
The watchdog functionality in both chips is almost identical to NCT6779.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:37 +01:00
Rafał Miłecki 1cc7495c60 watchdog: bcm47xx_wdt.c: add restart handler support
Just like in case of other watchdog drivers, use the new kernel core
API to provide restart support.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:27 +01:00
Mike Looijmans ba804a9510 watchdog: gpio_wdt: Add "always_running" feature to GPIO watchdog
On some chips, like the TPS386000, the trigger cannot be disabled
and the CPU must keep toggling the line at all times. Add a switch
"always_running" to keep toggling the GPIO line regardless of the
state of the soft part of the watchdog. The "armed" member keeps
track of whether a timeout must also cause a reset.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:22 +01:00
Geert Uytterhoeven 396f163ceb watchdog: da9063: Add restart handler support
Register a restart handler for the da9063 watchdog.  System restart is
triggered by sending the shutdown command to the PMIC.
As more-suitable restart handlers may exist, the priority of the
watchdog restart handler is set to 128.

The actual restart method was inspired by a platform-specific patch from
the BSP by Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:06 +01:00
Matthias Brugger a44a45536f watchdog: Add driver for Mediatek watchdog
This patch adds a driver for the Mediatek SoC integrated
watchdog. This driver supports watchdog and software reset
for mt65xx and mt81xx SoCs.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Eddie Huang <eddie.huang@mediatek.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:32:43 +01:00
Tony Lindgren fb1cbeaeed watchdog: Fix omap watchdogs to enable the magic close bit
This allows testing the watchdog easily with distros just by
doing pkill -9 watchdog.

Reported-by: Thomas Dziedzic <gostrc@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:32:36 +01:00
John Crispin a6f8f81ec7 watchdog: rt2880_wdt: minor clean up
Replace device_reset() with devm_reset_control_get() + reset_control_deassert().
Make use of watchdog_init_timeout() instead of setting the timeout manually.

Signed-off-by: John Crispin <blogic@openwrt.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:32:21 +01:00
Masanari Iida b91b5be5ba watchdog: hpwdt: Fix initialization message in hpwdt.c
allow_kdump was enabled as default since following commit.

commit a089361cf5,
watchdog: hpwdt: Unregister NMI events on exit.

But the initialization message was not modified.
So it still shows

  HP Watchdog Timer Driver: NMI decoding initialized,
  allow kernel dump: ON (default = 0/OFF)    <=

This "default = 0/OFF" message may confuse users.
Fix it as "default = 1/ON".

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:32:10 +01:00
Paolo Teti f83918fb5c watchdog: it87_wdt: add IT8783 ID
IT8783 watchdog works as in IT872x

Tested on Adlink cPCI-6520 boards

Signed-off-by: Paolo Teti <paolo.teti@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:32:08 +01:00
Krzysztof Kozlowski 4bd8ce33c0 watchdog: imx2: Constify struct regmap_config and watchdog_ops
The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const. Make struct
watchdog_ops const as well.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:31:06 +01:00
Naidu Tellapati 93937669e9 watchdog: ImgTec PDC Watchdog Timer Driver
This commit adds support for ImgTec PowerDown Controller Watchdog Timer.

Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
Signed-off-by: Jude Abraham <Jude.Abraham@imgtec.com>
[ezequiel: Minor style fixes]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:30:49 +01:00
Wolfram Sang 7a32757eda watchdog: drop owner assignment from platform_drivers
This platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-01-21 14:52:34 +01:00
Markus Pargmann 5fe65ce7cc watchdog: imx2_wdt: Disable power down counter on boot
Disable power down counter of the watchdog to avoid system resets. The
watchdog power down counter is set automatically by the chip. If it is
not set to 0 in the driver, the system resets.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-01-21 14:52:23 +01:00
Xiubo Li bbd5900935 watchdog: imx2_wdt: Improve power management support.
Improve power management operations(suspend and resume) as part of
dev_pm_ops for IMX2 watchdog driver.

If PM will be supported, please make sure that the wdev->clk
could disable the watchdog's counter input clock source or can
mask watchdog's reset request to the core.

If watchdog is still used by consumers and resumes from deep
sleep state, we need to restart the watchdog again without
enabling the timer.

If watchdog been has started --> stopped by the consumers and
resumes from non-deep sleep state, then start the timer again.

If watchdog has been started --> stopped by the consumers and
resumes from deep sleep state, will do nothing. The watchdog
will be restarted by consumers next time to be used.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-01-21 14:45:16 +01:00
Fabio Estevam ba90f261cd watchdog: imx2_wdt: Fix the argument of watchdog_active()
Fix the following build warning by passing the expected argument type to
watchdog_active():

drivers/watchdog/imx2_wdt.c: In function 'imx2_wdt_suspend':
drivers/watchdog/imx2_wdt.c:340:2: warning: passing argument 1 of 'watchdog_active' from incompatible pointer type [enabled by default]
In file included from drivers/watchdog/imx2_wdt.c:38:0:
include/linux/watchdog.h:104:20: note: expected 'struct watchdog_device *' but argument is of type 'struct watchdog_device **'

Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-18 16:01:20 +01:00
Xiubo Li aefbaf3a3f watchdog: imx2_wdt: Add power management support.
Add power management operations(suspend and resume) as part of
dev_pm_ops for IMX2 watchdog driver.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-18 16:01:14 +01:00
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Linus Torvalds a157508c97 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
 "The time(r) departement provides:

   - more infrastructure work on the year 2038 issue

   - a few fixes in the Armada SoC timers

   - the usual pile of fixlets and improvements"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: armada-370-xp: Use the reference clock on A375 SoC
  watchdog: orion: Use the reference clock on Armada 375 SoC
  clocksource: armada-370-xp: Add missing clock enable
  time: Fix sign bug in NTP mult overflow warning
  time: Remove timekeeping_inject_sleeptime()
  rtc: Update suspend/resume timing to use 64bit time
  rtc/lib: Provide y2038 safe rtc_tm_to_time()/rtc_time_to_tm() replacement
  time: Fixup comments to reflect usage of timespec64
  time: Expose get_monotonic_coarse64() for in-kernel uses
  time: Expose getrawmonotonic64 for in-kernel uses
  time: Provide y2038 safe mktime() replacement
  time: Provide y2038 safe timekeeping_inject_sleeptime() replacement
  time: Provide y2038 safe do_settimeofday() replacement
  time: Complete NTP adjustment threshold judging conditions
  time: Avoid possible NTP adjustment mult overflow.
  time: Rename udelay_test.c to test_udelay.c
  clocksource: sirf: Remove hard-coded clock rate
2014-12-10 08:18:32 -08:00
Linus Torvalds 0563fdc0d9 ARM: SoC cleanup on mach-at91 for 3.19
On Atmel AT91, the conversion to device tree is now considered complete,
 and all machines that were not already converted in 3.18 are assumed to
 be unused and dropped by the maintainer.
 
 All remaining board files that were written in C are dropped, and the
 ancient at91x40 sub-platform (based on an MMU-less ARM7) is removed
 altogether.  Cleaning up the last pieces was great fun, so I took the
 time to do some of the coding myself and removed several hundred code
 lines that ended up unused after the board files were done.
 
 There are still a couple of AT91 specific device drivers that are not
 converted to DT (CF, USB-OTG) and currently not working, and the platform
 itself is not "multiplatform"-enabled, but both issues are going to be
 taken care of in the 3.20 cycle.
 
 This is split out from the other cleanups purely based on the size
 of the branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iD8DBQBUhyNX5t5GS2LDRf4RAnjxAKCER7eoLNadu1/93n/a9d1nUz4MoQCcCZUq
 BolxCOi0wr4YTcQtp7rHzWI=
 =ykAB
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanup on mach-at91 from Arnd Bergmann:
 "On Atmel AT91, the conversion to device tree is now considered
  complete, and all machines that were not already converted in 3.18 are
  assumed to be unused and dropped by the maintainer.

  All remaining board files that were written in C are dropped, and the
  ancient at91x40 sub-platform (based on an MMU-less ARM7) is removed
  altogether.  Cleaning up the last pieces was great fun, so I took the
  time to do some of the coding myself and removed several hundred code
  lines that ended up unused after the board files were done.

  There are still a couple of AT91 specific device drivers that are not
  converted to DT (CF, USB-OTG) and currently not working, and the
  platform itself is not "multiplatform"-enabled, but both issues are
  going to be taken care of in the 3.20 cycle.

  This is split out from the other cleanups purely based on the size of
  the branch"

* tag 'at91-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: at91: remove unused board.h file
  ARM: at91: remove unneeded header files
  ARM: at91/clocksource: remove !DT PIT initializations
  ARM: at91: at91rm9200 ST initialization is now DT only
  ARM: at91: remove old AT91-specific drivers
  ARM: at91: cleanup initilisation code by removing dead code
  ARM: at91/Kconfig: select board files automatically
  ARM: at91: remove unused IRQ function declarations
  ARM: at91: remove legacy IRQ driver and related code
  ARM: at91: remove old at91-specific clock driver
  ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c files
  ARM: at91: remove all !DT related configuration options
  ARM: at91/trivial: update Kconfig comment to mention SAMA5
  ARM: at91: always USE_OF from now on
  ARM: at91/Kconfig: remove ARCH_AT91RM9200 option for drivers
  ARM: at91: switch configuration option to SOC_AT91RM9200
  ARM: at91: remove at91rm9200 legacy board support
  ARM: at91: remove at91rm9200 legacy boards files
  ARM: at91/Kconfig: remove useless fbdev Kconfig options
  ARM: at91: remove at91sam9261/at91sam9g10 legacy board support
  ...
2014-12-09 14:17:12 -08:00
Abhilash Kesavan 5476b2b77d watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
The watchdog mask bit offset listed for Exynos7 is incorrect.
Fix this.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Naveen Krishna Chatradhi <naveenkrishna.ch@gmail.com
Reviewd-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-05 20:21:35 +01:00
Thomas Gleixner 89de77a8c5 Merge branch 'clockevents/3.19' of http://git.linaro.org/people/daniel.lezcano/linux into timers/core
Daniel Lezcano muttered:

 * Marvell timer updates from Ezequiel Garcia
   - Add missing clock enable calls for armada
   - Change source clock for clocksource and watchdog
 * SIRF timer updates from Yanchang Li
   - Make clock rate configurable
2014-11-27 11:47:38 +01:00
Nicolas Ferre ee72f18b34 ARM: at91/Kconfig: remove ARCH_AT91RM9200 option for drivers
The precise selection is useless, so we simply remove these dependencies.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-26 16:42:05 +01:00
Ezequiel Garcia 8067042ad9 watchdog: orion: Use the reference clock on Armada 375 SoC
The 25 MHz reference clock has better stability so its use is prefered over the
core clock. Change the Armada 375 clock initialization to use this reference
clock. To ensure the driver is compatible with an old devicetree, also provide
a fallback path which will silently return to the previous behavior.

While here, add the clock specification to the binding documentation.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-11-26 13:51:08 +01:00
Greg Kroah-Hartman a8a93c6f99 Merge branch 'platform/remove_owner' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next
Remove all .owner fields from platform drivers
2014-11-03 19:53:56 -08:00
Carlo Caione 06980b24cf watchdog: meson: remove magic value for reboot
This patch removes the magic value used for rebooting the board. This
value is useless and leads to a static checker warning as reported by
Dan Carpenter.

Signed-off-by: Carlo Caione <carlo@caione.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 21:09:17 +02:00
Chen Gang 71fd380a6b watchdog: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM
They need HAS_IOMEM, so let them depend on it, the related error (with
allmodconfig under um):

    MODPOST 1205 modules
  ERROR: "devm_ioremap_resource" [drivers/watchdog/tegra_wdt.ko] undefined!
  ERROR: "devm_ioremap_resource" [drivers/watchdog/of_xilinx_wdt.ko] undefined!

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 21:08:53 +02:00
Chen-Yu Tsai c5ec618fbf watchdog: sunxi: Add A31 watchdog support
This patch adds support for the watchdog hardware found in A31 and
newer SoCs. This new hardware has registers at different offsets, and
the system reset control has been split out of the "mode" register
into a new "configuration" register.

Differences not supported by this driver include separate interrupt
lines for each watchdog, instead of sharing an interrupt line and
registers with the timer block.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 21:07:14 +02:00
Chen-Yu Tsai f2147de334 watchdog: sunxi: support parameterized compatible strings
This patch adds support for hardware parameters tied to compatible
strings, so similar hardware can reuse the driver.

This will be used to support the newer watchdog found in A31 and
later SoCs. Differences in the new hardware include separate
interrupt lines for each watchdog, and corresponding interrupt
control/status registers. Watchdog control registers were also
slightly rearranged.

Also replace ioread32()/iowrite32() with readl()/writel() in various
places changed.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-10-20 21:06:59 +02:00
Jingchang Lu 334a9d8131 watchdog: imx2_wdt: add restart handler support
Register the watchdog as the system restart function
to the new introducing kernel restart call chain in the
driver instead of providing the restart in machine desc.
  This restart handler function is from the mxc_restart()
in arch/arm/mach-imx/system.c

Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 21:04:50 +02:00
Josh Cartwright 05e487d905 watchdog: qcom: register a restart notifier
The WDT's BITE_TIME warm-reset behavior can be leveraged as a last
resort mechanism for triggering chip reset.  Usually, other restart
methods (such as PS_HOLD) are preferrable for issuing a more complete
reset of the chip.  As such, keep the priority of the watchdog notifier
low.

Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 21:04:19 +02:00
Heiko Stuebner f286e1335f watchdog: s3c2410: add restart handler
On a lot of Samsung systems the watchdog is responsible for restarting the
system and until now this code was contained in plat-samsung/watchdog-reset.c.

With the introduction of the restart handlers, this code can now move into
driver itself, removing the need for arch-specific code.

Tested on a S3C2442 based GTA02

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-10-20 21:03:37 +02:00
Jisheng Zhang 31228f43ab watchdog: dw_wdt: add restart handler support
The kernel core now provides an API to trigger a system restart.
Register with it to support restarting the system via. watchdog.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 21:03:06 +02:00
Carlo Caione 22e1b8f60f ARM: meson: add watchdog driver
This patch adds the watchdog driver for the Amlogic Meson SoCs used also
to reboot the device.

Signed-off-by: Carlo Caione <carlo@caione.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:57:16 +02:00
Janusz Uzycki 3281b85c86 stmp3xxx_rtc_wdt: Add suspend/resume PM support
There is no conflict with rtc/rtc-stmp3xxx.c parent
because modified registers in PM functions of stmp3xxx_rtc_wdt
are different.

Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:55:54 +02:00
Krystian Garbaciak 5e9c16e376 watchdog: Add DA9063 PMIC watchdog driver.
This driver supports the watchdog device inside the DA9063 PMIC.

Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:55:24 +02:00
Beniamino Galvani 22b1c841e3 watchdog: add driver for Ricoh RN5T618 watchdog
This adds a driver for the watchdog timer available in Ricoh RN5T618
PMIC. The device supports a programmable expiration time of 1, 8, 32
or 128 seconds.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:55:02 +02:00
Naveen Krishna Chatradhi 2b9366b669 watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7
Exynos7 SoC has a Watchdog for Atlas (A57) cores
This patch adds support for the Atlas watchdog.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:53:51 +02:00
Josh Cartwright 1094ebe9d1 watchdog: qcom: add support for KPSS WDT
Add a driver for the watchdog timer block found in the Krait Processor
Subsystem (KPSS) on the MSM8960, APQ8064, and IPQ8064.

Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:52:50 +02:00
Jisheng Zhang dfa07141e7 watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top()
The TOP_INIT, ie bit 4-7 of the WDOG_TIMEOUT_RANGE_REG_OFFSET register
may be zero, so the timeout period may be very short after initialization
is done, thus the system may be reset soon after enabling. We fix this
problem by also initialising the TOP_INIT when setting TOP in function
dw_wdt_set_top().

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:50:28 +02:00
Harini Katakam 58bf016426 watchdog: Add Cadence WDT driver
Add Cadence WDT driver. This is used by Xilinx Zynq.

Signed-off-by: Harini Katakam <harinik@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:48:02 +02:00
Xiubo Li 0461aea7ec watchdog: imx2_wdt: Convert to use regmap framework's endianness method.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:45:27 +02:00
Mika Westerberg 1f897a8191 watchdog: ts72xx_wdt: Kill superfluous variable in remove
There is no need to store the return value of misc_deregister() in a
variable. Instead we can just return the value directly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:44:55 +02:00
Pranith Kumar 62ce25439a powerpc: booke_wdt: Fix build error as a module
Building booke_wdt fails when trying to build as a module as there is no
early_param() in module. Fix by using module_param() instead of early_param().

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:44:22 +02:00
Michal Simek fca8c0481b watchdog: xilinx: Remove .owner field for driver
There is no need to init .owner field.

Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"

This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20 20:43:42 +02:00
Wolfram Sang fa21a580de watchdog: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:56 +02:00
Linus Torvalds 40c43269cf New driver for menf21bmc.
Convert k10temp, smsc47b397, da9052, da9055 to new hwmon API.
 Register ntc_thermistor driver with thermal subsystem.
 Add support for F15h M60h to k10temp driver.
 Add driver for MEN14F021P00 BMC HWMON driver; this required a merge
 with tag mfd-hwmon-leds-watchdog-v3.18.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUNZQwAAoJEMsfJm/On5mBxZEQAIf555P39+4fkRIrf3oYUuC2
 q1tXNP0u8Z74eDFfwYYobt+NCJG5KW3H3kFaO5WCTjySfVwjUin9Fc6DkLl2m3U+
 4FfH/2rO1y1upVRQemLAhe7BAYJAzABuNFWbLqqbGbZytyf5sHzhP52vjJ5VNmvr
 5zcn/sGJdB5M9tj3isvfrac0itNu+D7K3qxknk4wI5gb6YzKg+uovXscPVx4Xa7w
 eHKXJWITtBAZdD5bDV5YAzlTR15ASG3h+yyV7G5rKgslYyCMuRfIDm8Rl5zzHUmq
 DjLwwib469NMii6CjdC7kEpYOgJ2ZxK/2XQ5IAeGax8GLdIHB6lhp3GrXIzzRwiW
 5mtsMdRB7y41p050rIXN7AIXGVqSvtZtKf0r8w1p5YElat/wtX9gv0lGTgOq4sSa
 0SOE7E6W0cfe75dYgJP/6HIkuZZ7PweBelQYDfWrN00u/rdIcwC2nRnW/nDbctkr
 TmQLiS0ql2mXPWXD+Lk9v3bUALuYOPuQpX2aARj7en7jeBagP6KX0d70GaoAEzGk
 Gw6z4X4gI3TasuIck4LZx3kaiijEnDOgnIaEQah4b3k7ABEiuOYVBBpnWvqECaSD
 p9/lwFAs2POCsYSuADiclzxH6FLCMRJLE2V7dgMun9uK60o+0pGUqBL1PG/5/w+r
 jGdB/75PCOEn3Y/VlfZg
 =vI5p
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 - new driver for menf21bmc.
 - convert k10temp, smsc47b397, da9052, da9055 to new hwmon API.
 - register ntc_thermistor driver with thermal subsystem.
 - add support for F15h M60h to k10temp driver.
 - add driver for MEN14F021P00 BMC HWMON driver; this required a merge
   with tag mfd-hwmon-leds-watchdog-v3.18

* tag 'hwmon-for-linus-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ab8500) Call kernel_power_off instead of pm_power_off
  hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver
  leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driver
  watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver
  mfd: menf21bmc: Introduce MEN 14F021P00 BMC MFD Core driver
  hwmon: (ntc_thermistor) Add ntc thermistor to thermal subsystem as a sensor.
  hwmon: (smsc47b397) Convert to devm_hwmon_device_register_with_groups
  MAINTAINERS: add entry for the PWM fan driver
  hwmon: (k10temp) Convert to devm_hwmon_device_register_with_groups
  hwmon: (k10temp) Add support for F15h M60h
  hwmon: (da9052) Convert to devm_hwmon_device_register_with_groups
  hwmon: (da9055) Convert to devm_hwmon_device_register_with_groups
  hwmon: (ads1015) Use of_property_read_u32 at appropriate places
2014-10-10 16:40:14 -04:00
Linus Torvalds 93834c6419 Immutable branch with restart handler patches for v3.18
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUJQ8/AAoJEMsfJm/On5mBMNgP+QEUHpRKJaOGU3jX/ftHH/t3
 EoNUx7lZt6Q0c9MB2ySAxILYpWUujc9N0tDkRDyW7mTWunF8gEGiRN+iKaSbzcUN
 Y4VffRAbxBasIaBqRtpDl08ycODh6Xu1t8sAao03DdhnMNLGNNO79s3UFHsubdTC
 cXx9mfYR/2SHV/0BXiFvKi8ovdqUspdp9cyZO/qc0PVFGbsADx3MNGGzkvWfgvcE
 6vXnKnUkZrNl5JPiG77kTKZnDsjEMXggmA9DGWKijFCJjGIbuLiuIDf63Zp+eQ52
 mJMRA+ViP/dDgAxY1dkWBcF5nOBT1vTYwLfy69jEoQeHzcomiHVoDKmCSBOpeAEH
 G8VoasWKWYpYnlcOJb+XgkA3QTe6mOPgAPzNsbYr0Ep7hMFw66mOQgKbgi6k4Qts
 HHimG9pnBYpPlBUfvNh+6K4dHAm0C2IyoZyMhKWsyFH6hkhS8TVM8j0gPR8rTTmk
 0a9/e2vxcFnfBe3UAJaqzWRVFsBkOHrTNpG1hvID3Oq8IeywSBXw2VMSR93+mwaB
 sa/GCZKlqHGpOfmtILlhiXQX0E/tTHmcrI2VqyCpX0J2CW+MiGvkcGOwKHOJciSA
 Cj9D68y837QU/DCpMQ6ec/5wqWqZKz8yQb8kxb6vJcL19JcVKdAiPzbuOI49C3Ux
 YxDWoUutzDfVoUD5RhcJ
 =cP1w
 -----END PGP SIGNATURE-----

Merge tag 'restart-handler-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull restart handler infrastructure from Guenter Roeck:
 "This series was supposed to be pulled through various trees using it,
  and I did not plan to send a separate pull request.  As it turns out,
  the pinctrl tree did not merge with it, is now upstream, and uses it,
  meaning there are now build failures.

  Please pull this series directly to fix those build failures"

* tag 'restart-handler-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  arm/arm64: unexport restart handlers
  watchdog: sunxi: register restart handler with kernel restart handler
  watchdog: alim7101: register restart handler with kernel restart handler
  watchdog: moxart: register restart handler with kernel restart handler
  arm: support restart through restart handler call chain
  arm64: support restart through restart handler call chain
  power/restart: call machine_restart instead of arm_pm_restart
  kernel: add support for kernel restart handler call chain
2014-10-10 16:38:02 -04:00
Guenter Roeck d20a1d90ac watchdog: sunxi: register restart handler with kernel restart handler
The kernel core now provides an API to trigger a system restart.  Register
with it instead of setting arm_pm_restart.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-09-26 00:00:42 -07:00
Guenter Roeck 87ffc69e4b watchdog: alim7101: register restart handler with kernel restart handler
The kernel core now provides an API to trigger a system restart.  Register
with it to restart the system instead of misusing the reboot notifier.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-09-26 00:00:32 -07:00
Guenter Roeck ad0e0e6810 watchdog: moxart: register restart handler with kernel restart handler
The kernel now provides an API to trigger a system restart.  Register with
it instead of setting arm_pm_restart.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2014-09-26 00:00:27 -07:00
Andreas Werner 5033263992 watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver
Added driver to support the 14F021P00 BMC Watchdog.
The BMC is a Board Management Controller including watchdog functionality.

Signed-off-by: Andreas Werner <andreas.werner@men.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24 15:36:19 +01:00
Andrew Lunn 6da4161355 watchdog: Remove ARCH_KIRKWOOD dependency
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu.
ARCH_MVEBU is sufficient.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
Link: https://lkml.kernel.org/r/1409417172-6846-7-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-09-09 14:40:17 +00:00
Linus Torvalds e669830526 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 3.17.  It contains:

   - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy  updates
   - MIPS ptrace updates and cleanups
   - various fixes that will also go to -stable
   - a number of cleanups and small non-critical fixes.
   - NUMA support for the Loongson 3.
   - more support for MSA
   - support for MAAR
   - various FP enhancements and fixes"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits)
  MIPS: jz4740: remove unnecessary null test before debugfs_remove
  MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive
  MIPS: ZBOOT: implement stack protector in compressed boot phase
  MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT
  MIPS: Bonito64: remove a duplicate define
  MIPS: Malta: initialise MAARs
  MIPS: Initialise MAARs
  MIPS: detect presence of MAARs
  MIPS: define MAAR register accessors & bits
  MIPS: mark MSA experimental
  MIPS: Don't build MSA support unless it can be used
  MIPS: consistently clear MSA flags when starting & copying threads
  MIPS: 16 byte align MSA vector context
  MIPS: disable preemption whilst initialising MSA
  MIPS: ensure MSA gets disabled during boot
  MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains
  MIPS: fix MSA context for tasks which don't use FP first
  MIPS: init upper 64b of vector registers when MSA is first used
  MIPS: save/disable MSA in lose_fpu
  MIPS: preserve scalar FP CSR when switching vector context
  ...
2014-08-07 08:47:00 -07:00
Linus Torvalds ebb067d2f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "Mostly cleanups and bug-fixes, with two exceptions.

  The first is lazy flushing of I/O-TLBs for PCI to improve performance,
  the second is software dirty bits in the pmd for the madvise-free
  implementation"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
  s390/locking: Reenable optimistic spinning
  s390/mm: implement dirty bits for large segment table entries
  KVM: s390/mm: Fix page table locking vs. split pmd lock
  s390/dasd: fix camel case
  s390/3215: fix hanging console issue
  s390/irq: improve displayed interrupt order in /proc/interrupts
  s390/seccomp: fix error return for filtered system calls
  s390/pci: introduce lazy IOTLB flushing for DMA unmap
  dasd: fix error recovery for alias devices during format
  dasd: fix list_del corruption during format
  dasd: fix unresponsive device during format
  dasd: use aliases for formatted devices during format
  s390/pci: fix kmsg component
  s390/kdump: Return NOTIFY_OK for all actions other than MEM_GOING_OFFLINE
  s390/watchdog: Fix module name in Kconfig help text
  s390/dasd: replace seq_printf by seq_puts
  s390/dasd: replace pr_warning by pr_warn
  s390/dasd: Move EXPORT_SYMBOL after function/variable
  s390/dasd: remove unnecessary null test before debugfs_remove
  s390/zfcp: use qdio buffer helpers
  ...
2014-08-07 08:41:00 -07:00
Maxime Ripard 440e96bc77 wdt: sunxi: Move restart code to the watchdog driver
Most of the watchdog code is duplicated between the machine restart code and
the watchdog driver. Add the restart hook to the watchdog driver, to be able to
remove it from the machine code eventually.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05 22:43:37 +02:00
Xiubo Li f728f4bfc4 watchdog: imx2_wdt: adds big endianness support.
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+
platforms, and will be in different endianness mode in those SoCs:

    SoCs       WDT endian mode
------------------------------------
    IMX2+           LE
    Vybird          LE
    LS1             BE
    LS2             LE

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05 22:43:11 +02:00
George Cherian 2cdf25bb57 watchdog: shwdt: Remove the unnecessary check of resource after platform_get_resource()
devm_ioremap_resource check for a valid resource. Remove the unnecessary check.
Also group platform_get_resource and devm_ioremap_resource together for better
readability.

Signed-off-by: George Cherian <george.cherian@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05 22:42:56 +02:00
George Cherian 37f152915f watchdog: lantiq_wdt: Remove the un-necessary check of resource after platform_get_resource()
devm_ioremap_resource() checks for valid resource.
Remove the un-necessary check after platform_get_resource().

Signed-off-by: George Cherian <george.cherian@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05 22:42:27 +02:00
George Cherian 4bba08dda4 watchdog: dw_wdt: Remove the un-necessary check after platform_get_resource()
devm_ioremap_resource() checks for valid resource.
Remove the un-necessary check after platform_get_resource().

Signed-off-by: George Cherian <george.cherian@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-08-05 22:42:18 +02:00
Aaro Koskinen f64988f13e MIPS: OCTEON: watchdog: don't jump to bootloader without entry address
If CONFIG_HOTPLUG_CPU is set, the driver thinks bootloader entry
address is configured and we should jump there. However, this is
not necessarily true if the kernel is booted on a system
with older/incompatible bootloader.

Add dynamic checks for the bootloader entry address.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-watchdog@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7201/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-02 00:06:42 +02:00
Philipp Hachtmann a8fa394350 s390/watchdog: Fix module name in Kconfig help text
The help text for DIAG288_WATCHDOG in drivers/watchdog/Kconfig
still mentioned the misleading old module name vmwatchdog.
This patch changes that to the correct new name diag288_wdt.

Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-07-22 09:26:19 +02:00
Linus Torvalds 7a8e9c8088 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 patches from Martin Schwidefsky:
 "A couple of bug fixes, a debug change for qdio, an update for the
  default config, and one small extension.

  The watchdog module based on diagnose 0x288 is converted to the
  watchdog API and it now works under LPAR as well"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ccwgroup: use ccwgroup_ungroup wrapper
  s390/ccwgroup: fix an uninitialized return code
  s390/ccwgroup: obtain extra reference for asynchronous processing
  qdio: Keep device-specific dbf entries
  s390/compat: correct ucontext layout for high gprs
  s390/cio: set device name as early as possible
  s390: update default configuration
  s390: avoid format strings leaking into names
  s390/airq: silence lockdep warning
  s390/watchdog: add support for LPAR operation (diag288)
  s390/watchdog: use watchdog API
  s390/sclp_vt220: Enable ASCII console per default
  s390/qdio: replace shift loop by ilog2
  s390/cio: silence lockdep warning
  s390/uaccess: always load the kernel ASCE after task switch
  s390/ap_bus: Make modules parameters visible in sysfs
2014-06-21 06:47:01 -10:00
David Cohen 87a1ef8058 watchdog: add Intel MID watchdog driver support
Add initial Intel MID watchdog driver support.

This driver is an initial implementation of generic Intel MID watchdog
driver. Currently it supports Intel Merrifield platform.

Signed-off-by: Eric Ernst <eric.ernst@intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:48:16 +02:00
Viresh Kumar 938626d96a watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()
Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct
watchdog_device' passed to it. sp805 was rather setting this in a local
variable. Fix it.

Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: <stable@vger.kernel.org> # 2.6.36+
2014-06-10 21:47:47 +02:00
Tang Yuantian d2deebabae booke/watchdog: refine and clean up the codes
Basically, this patch does the following:
1. Move the codes of parsing boot parameters from setup-common.c
   to driver. In this way, code reader can know directly that
   there are boot parameters that can change the timeout.
2. Make boot parameter 'booke_wdt_period' effective.
   currently, when driver is loaded, default timeout is always
   being used in stead of booke_wdt_period.
3. Wrap up the watchdog timeout in device struct and clean up
   unnecessary codes.

Signed-off-by: Tang Yuantian <yuantian.tang@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Li Yang <leoli@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:47:26 +02:00
Arnd Bergmann ec2e32ca66 watchdog: iop_wdt only builds for mach-iop13xx
All three iop variants we support in Linux (iop32x, iop33x and
iop13xx) seem to have support for the watchdog hardware, but this
driver fails to build for the first two of these because it
uses the IOP13XX_WDTCR_IB_RESET macro that is only defined for
iop13xx.

This clarifies the dependency in Kconfig to avoid randconfig
build errors. It is unlikely that anyone will ever miss support
for this driver on the ancient iop3xx platforms, so we don't
need to bother trying to fix it properly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
2014-06-10 21:46:57 +02:00
Guenter Roeck 7285fae934 watchdog: Remove drivers for W83697HF and W83697UG
Since both chips are now supported by the w83627hf watchdog driver,
the chip specific drivers are no longer needed and can be removed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:46:26 +02:00
Guenter Roeck be281588d0 watchdog: w83627hf_wdt: Add early_disable module parameter
Add early_disable module parameter to match functionality previously
available in the w83697hf_wdt driver.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:46:07 +02:00
Ezequiel Garcia b483642fc3 watchdog: orion: Add Armada 375/380 SoC support
This commit adds support for the Armada 375 and Armada 380 SoCs.

This SoC variant has a second RSTOUT register, in addition to the already
existent, which is shared with the system-controller. To handle this RSTOUT,
we introduce a new MMIO register 'rstout_mask' to be required on
'armada-{375,380}-watchdog' new compatible string.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:41 +02:00
Ezequiel Garcia 1b0ea574ac watchdog: orion: Introduce per-SoC enabled() function
In order to support other SoCs, it's needed to have a different enabled()
implementation for each SoC. This commit adds no functionality, and it
consists of preparation work.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:31 +02:00
Ezequiel Garcia ebf5cf7628 watchdog: orion: Introduce per-SoC stop() function
In order to support other SoCs, it's needed to have a different stop()
implementation for each SoC. This commit adds no functionality, and it
consists of preparation work.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:24 +02:00
Ezequiel Garcia eba985e20c watchdog: orion: Remove unneeded atomic access
The RSTOUT register on the Armada 370 SoC variant is a dedicated register
(not shared across orthogonal subsystems) and so it's not needed to write
it atomically.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:20 +02:00
Ezequiel Garcia 92d4fc1a1f watchdog: orion: Introduce a SoC-specific RSTOUT mapping
Separate the RSTOUT register mapping for the different compatible strings
supported by the driver. This allows to use devm_ioremap on SoC variants that
share the RSTOUT register, and devm_ioremap_resource (which requests the MMIO
region) on SoCs that have a dedicated RSTOUT register.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:06 +02:00
Ezequiel Garcia aaaac9ec79 watchdog: orion: Move the register ioremap'ing to its own function
Follow-up patches will extend the registers ioremap and request
to handle SoC-specific quirks on the RSTOUT register. Therefore,
in order to keep the code readable, this commit introduces a special
function for this.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:43:54 +02:00
Jingoo Han 9ebf1855db watchdog: xilinx: Make of_device_id array const
Make of_device_id array const, because all OF functions
handle it as const.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Michal Simek <monstr@monstr.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:43:21 +02:00
Anatolij Gustschin faad5de0b1 watchdog: imx2_wdt: convert to watchdog core api
Convert the imx2_wdt driver to the new watchdog core api.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:42:59 +02:00
Xiubo Li a797700329 watchdog: imx2_wdt: convert to use regmap API.
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+
platforms, and will be in different endianness mode in those SoCs:

SoCs         CPU endian mode      WDT endian mode
------------------------------------------------
IMX2+            LE                    LE
Vybird           LE                    LE
LS1              LE                    BE
LS2              LE                    LE

Other possible SoCs:
SoCs         CPU endian mode      WDT endian mode
------------------------------------------------
Soc1             BE                    BE
Soc2             BE                    LE

And also the watchdog's registers will be 32-bits for some versions,
and though it is 16-bits in IMX2+, Vybird and LS+.

Using the regmap APIs, could be more easy to support different
endianness and also more easy to support 32-bits version...

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:42:46 +02:00
Xiubo Li 30cb042a84 watchdog: imx2_wdt: Sort the header files alphabetically
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:42:14 +02:00
Gabor Juhos b4e62d9467 watchdog: ath79_wdt: switch to clk_prepare/clk_disable
Replace clk_enable() and clk_disable() calls with
clk_prepare_enable() and clk_disable_unprepare()
to get ready for the migration to the common clock
framework.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:41:36 +02:00
Gabor Juhos 23afeb613e watchdog: ath79_wdt: avoid spurious restarts on AR934x
On some AR934x based systems, where the frequency of
the AHB bus is relatively high, the built-in watchdog
causes a spurious restart when it gets enabled.

The possible cause of these restarts is that the timeout
value written into the TIMER register does not reaches
the hardware in time.

Add an explicit delay into the ath79_wdt_enable function
to avoid the spurious restarts.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: <stable@vger.kernel.org>
2014-06-10 21:40:48 +02:00
Alexander Shiyan ff4e0ae5fe watchdog: shwdt: Remove unused platform_set_drvdata()
This patch removes platform_set_drvdata() which is not used in
the driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:40:16 +02:00
gundberg a9e0436b30 watchdog: kempld-wdt: Use the correct value when configuring the prescaler with the watchdog
Use the prescaler index, rather than its value, to configure the watchdog.
This will prevent a mismatch with the prescaler used to calculate the cycles.

Signed-off-by: Per Gundberg <per.gundberg@icomera.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Michael Brunner <michael.brunner@kontron.com>
Tested-by: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>
2014-06-10 21:39:48 +02:00
Emilio López 51ee34ab58 watchdog: sunxi: Fix compilation with C=2
When compiling sunxi_defconfig while using C=2, the following error
causes the compilation to fail:

    drivers/watchdog/sunxi_wdt.c:60:15: error: constant 0b0001 is not a valid number

Fix it by using hex notation instead of the non-standard binary one

Signed-off-by: Emilio Lopez <emilio@elopez.com.ar>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:39:26 +02:00
Julia Lawall 3813ff8b38 watchdog: via_wdt: replace del_timer by del_timer_sync
Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exits.

This change was suggested by Thomas Gleixner.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier i,t,ex;
@@
struct t i = { .remove = ex, };

@@
identifier r.ex;
@@
ex(...) {
  <...
- del_timer
+ del_timer_sync
    (...)
  ...>
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:38:25 +02:00
Jean Delvare 1e8c8a5b48 watchdog: Fix SBC8360 dependencies
According to its Kconfig help text, the sbc8360 watchdog driver is
only used on the Axiomtek SBC8360 single-board computer. This piece of
hardware is 32-bit x86 so the driver is useless beyond X86_32.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:37:14 +02:00
Philipp Hachtmann 646f919e93 s390/watchdog: add support for LPAR operation (diag288)
Add the LPAR variant of the diag 288 watchdog to the driver.
The only available action on timeout for LPAR is a PSW restart.

Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:29 +02:00
Philipp Hachtmann f7a94db4e9 s390/watchdog: use watchdog API
Converted the vmwatchdog driver to use the kernel's watchdog API.

Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:29 +02:00
Linus Torvalds 467a9e1633 CPU hotplug notifiers registration fixes for 3.15-rc1
The purpose of this single series of commits from Srivatsa S Bhat (with
 a small piece from Gautham R Shenoy) touching multiple subsystems that use
 CPU hotplug notifiers is to provide a way to register them that will not
 lead to deadlocks with CPU online/offline operations as described in the
 changelog of commit 93ae4f978c (CPU hotplug: Provide lockless versions
 of callback registration functions).
 
 The first three commits in the series introduce the API and document it
 and the rest simply goes through the users of CPU hotplug notifiers and
 converts them to using the new method.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTQow2AAoJEILEb/54YlRxW4QQAJlYRDUzwFJzJzYhltQYuVR+
 4D74XMtvXgoJfg3cwdSWvMKKpJZnA9BVN0f7Hcx9wYmgdexYUuHeZJmMNyc3S2+g
 KjKBIsugvgmZhHbbLd6TJ6GBbhGT5JLt9VmSfL9zIkveInU1YHFUUqL/mxdHm4J0
 BSGKjk2rN3waRJgmY+xfliFLtQjDKFwJpMuvrgtoUyfas3f4sIV43UNbqdvA/weJ
 rzedxXOlKH/id4b56lj/4iIzcoL3mwvJJ7r6n0CEMsKv87z09kqR0O+69Tsq/cgs
 j17CsvoJOmZGk3QTeKVMQWBsvk6aPoDu3zK83gLbQMt+qjOpSTbJLz/3HZw4/TrW
 ss4nuZne1DLMGS+6hoxYbTP+6Ni//Kn+l/LrHc5jb7m1X3lMO4W2aV3IROtIE1rv
 lEP1IG01NU4u9YwkVj1dyhrkSp8tLPul4SrUK8W+oNweOC5crjJV7vJbIPJgmYiM
 IZN55wln0yVRtR4TX+rmvN0PixsInE8MeaVCmReApyF9pdzul/StxlBze5BKLSJD
 cqo1kNPpsmdxoDucqUpQ/gSvy+IOl2qnlisB5PpV93sk7De6TFDYrGHxjYIW7jMf
 StXwdCDDQhzd2Q8Kfpp895A1dbIl8rKtwA6bTU2eX+BfMVFzuMdT44cvosx1+UdQ
 sWl//rg76nb13dFjvF+q
 =SW7Q
 -----END PGP SIGNATURE-----

Merge tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull CPU hotplug notifiers registration fixes from Rafael Wysocki:
 "The purpose of this single series of commits from Srivatsa S Bhat
  (with a small piece from Gautham R Shenoy) touching multiple
  subsystems that use CPU hotplug notifiers is to provide a way to
  register them that will not lead to deadlocks with CPU online/offline
  operations as described in the changelog of commit 93ae4f978c ("CPU
  hotplug: Provide lockless versions of callback registration
  functions").

  The first three commits in the series introduce the API and document
  it and the rest simply goes through the users of CPU hotplug notifiers
  and converts them to using the new method"

* tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
  net/iucv/iucv.c: Fix CPU hotplug callback registration
  net/core/flow.c: Fix CPU hotplug callback registration
  mm, zswap: Fix CPU hotplug callback registration
  mm, vmstat: Fix CPU hotplug callback registration
  profile: Fix CPU hotplug callback registration
  trace, ring-buffer: Fix CPU hotplug callback registration
  xen, balloon: Fix CPU hotplug callback registration
  hwmon, via-cputemp: Fix CPU hotplug callback registration
  hwmon, coretemp: Fix CPU hotplug callback registration
  thermal, x86-pkg-temp: Fix CPU hotplug callback registration
  octeon, watchdog: Fix CPU hotplug callback registration
  oprofile, nmi-timer: Fix CPU hotplug callback registration
  intel-idle: Fix CPU hotplug callback registration
  clocksource, dummy-timer: Fix CPU hotplug callback registration
  drivers/base/topology.c: Fix CPU hotplug callback registration
  acpi-cpufreq: Fix CPU hotplug callback registration
  zsmalloc: Fix CPU hotplug callback registration
  scsi, fcoe: Fix CPU hotplug callback registration
  scsi, bnx2fc: Fix CPU hotplug callback registration
  scsi, bnx2i: Fix CPU hotplug callback registration
  ...
2014-04-07 14:55:46 -07:00
Linus Torvalds e5744abb2f == Changes to existing drivers ==
- Use of managed resources - omap, twl4030, ti_am335x_tscadc
    - Advanced error handling - omap
    - Rework clk management - omap
    - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
    - IRC management overhaul and !BROKEN - pm8921
    - Convert to regmap - ssbi, pm8921
    - Use simple power-management ops - ucb1x00
    - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
       - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
       	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
 	tps65912, vexpress-config, wm8350, ywm8350
    - Various bug fixes across the subsystem
       - NULL/invalid pointer dereference prevention
       - Resource leak mitigation,
       - Variable used initialised
       - Staticise various containers
       - Enforce return value checks
 
  == New drivers/supported devices ==
    - Add support for s2mps14 and s2mpa01 to sec
    - Add support for da9063 (v5) to da9063
    - Add support for atom-c2000 to gpio-ich
    - Add support for come-{mbt10,cbt6,chl6} to kempld
    - Add support for da9053 to da9052
    - Add support for itco-wdt (v3) and baytrail to lpc_ich
    - Add new drivers for tps65218, rtsx_usb, bcm590xx
 
  == (Re-)moved drivers ==
    - twl4030 ==> drivers/iio
    - ti-ssp  ==> /dev/null
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTQmHbAAoJEFGvii+H/HdhXgAQAI6dNLb3AfNol49pNh5nEcrt
 sixQwu56xe64xozcMq41oXcbIe6NOvd/Sgf57fowCqrNyXd3k2sp6/KzA1yM8yfc
 2Xfm2fzzMoyH3lEopepT0zKMEyeOKxCNJWInXjRDmR6EN8szV/gAvwEptXnXKq8n
 sANQCBr2A1sDAlxu5onDI6SGEibCZgSsW+EElPyNKjXyIXdATv+ZLSuNCapt2Zg2
 H/KM+CY2hlcl6quWwjEUtPF4Ux0hIv3ePkwDKQicXMgndxL3+aL5L66UHsIovgxW
 o9H2aA6cfOQJuAXAZUvHlsNlefFW5qpFFR8kXiW87Say3+7nijoe5DhH/RBSZN+i
 O0rbxWVa1rW9eYmHuKAPNMR8Lp4FN9OvBo/Yv3UfmMV661vLVLOvTwJI9GZg7v8o
 UPMDhYNgEnRNrWqf7Wkj9ywgvGaO8qggm7gpE2cFD8DGDR7aZQ9goRKpaVSjTNmW
 4staek1u4g7YQ9s2UXxQ0JFc7esMbUbXxv5Bmk+4JPiI3P4gDMTg7jhh5iKDcEs5
 BVUIfdYKF9LInfYT3o9Uvo6TbYeAfwwzOdMFDWa5BjGOCLD9ttOEGtqMD/bkANbn
 YsaD6xKEL+su37CocSPnekgU+IS0uLb15jpa06CmoaALPGAZcRffKMygSHtlyGtR
 pNazlO93tu9JXQcL5B+A
 =p4SP
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - Use of managed resources - omap, twl4030, ti_am335x_tscadc
   - Advanced error handling - omap
   - Rework clk management - omap
   - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
   - IRC management overhaul and !BROKEN - pm8921
   - Convert to regmap - ssbi, pm8921
   - Use simple power-management ops - ucb1x00
   - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
      - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
      	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
	tps65912, vexpress-config, wm8350, ywm8350
   - Various bug fixes across the subsystem
      - NULL/invalid pointer dereference prevention
      - Resource leak mitigation,
      - Variable used initialised
      - Staticise various containers
      - Enforce return value checks

  New drivers/supported devices:
   - Add support for s2mps14 and s2mpa01 to sec
   - Add support for da9063 (v5) to da9063
   - Add support for atom-c2000 to gpio-ich
   - Add support for come-{mbt10,cbt6,chl6} to kempld
   - Add support for da9053 to da9052
   - Add support for itco-wdt (v3) and baytrail to lpc_ich
   - Add new drivers for tps65218, rtsx_usb, bcm590xx

  (Re-)moved drivers:
   - twl4030 ==> drivers/iio
   - ti-ssp  ==> /dev/null"

* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
  mfd: wm5110: Correct default for HEADPHONE_DETECT_1
  mfd: arizona: Correct small errors in the DT binding documentation
  mfd: arizona: Mark DSP clocking register as volatile
  mfd: devicetree: bindings: Add pm8xxx RTC description
  mfd: kempld-core: Fix potential hang-up during boot
  mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
  mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
  mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
  mfd: sec-core: Fix I2C dummy device resource leak on probe failure
  mfd: sec-core: Add of_compatible strings for clock MFD cells
  mfd: Remove obsolete ti-ssp driver
  Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
  mfd: bcm590xx: Fix type argument for module device table
  mfd: lpc_ich: Add support for Intel Bay Trail SoC
  mfd: lpc_ich: Add support for NM10 GPIO
  mfd: lpc_ich: Change Avoton to iTCO v3
  watchdog: iTCO_wdt: Add support for v3 silicon
  mfd: lpc_ich: Add support for iTCO v3
  mfd: lpc_ich: Remove lpc_ich_cfg struct use
  mfd: lpc_ich: Only configure watchdog or GPIO when present
  ...
2014-04-07 10:24:18 -07:00
Linus Torvalds cbda94e039 ARM: SoC: driver changes
These changes are mostly for ARM specific device drivers that either
 don't have an upstream maintainer, or that had the maintainer ask
 us to pick up the changes to avoid conflicts. A large chunk of this
 are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from
 that, reset controllers for STi as well as a large rework of the
 Marvell Orion/EBU watchdog driver are notable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/1+GCrR//JCVInAQJmfg/9GyqHatDjjUPUBjUQRIEtKgGdmQwdbDqF
 x+OrS/q5B5zYbpIWkbkt1IUYJfU+89Z5ev9jxI4rV824Nu9Y92mHPDnv+N/ptkIh
 q2OVP3bQDpWs3aEVV2B1HBNcWrNUuwco9BJu05eegEePii/cto0/wKwWIgUmrmjy
 xOLthsnp2YmeplGs7ctC6Dz8XbmELebpawejTGylARXei/SwmzB/YYDgJbYjRL2I
 WSCVa8Vo+MZaGC/yxdKVTtvsKVQenxGoMO3ojikJeRdvuVRJds48Cw+UBdzWYNeJ
 3Ssvbdx6Xltf9jy/7H0btOUgxPetZuUV+2XpbWfGu0Zr9FcGDv3q9hrxA+UYKnkY
 GIGU0otSsmpHnX5Ms3E2xnHiV/fihxA3qohqts5kYRBDr5uc+IpW6SbDymQliCGG
 OO4XmIVM3pmsqAqP3Zuseemt9CeSW2yC0XlfXkzjO74yY39c+WLBbtGI40Z5W6i0
 mM1C8RD3QSNijYCEC8eqz06BQfRImsPs+jllsnJTZaHfbOsib718uvandjfG26lN
 616YMcqq0Sp51HIQ4qW7f2dQr7vOyNqbukdkrwF5JgkY/nVki5kdciRg/yeipRy6
 Ey80a+OTq0GQljM0F2dcH/A1eHH9KsuI1L6NdSMJsl0h6guIBORPTwTw3qJ13OkR
 wpJyM+Gm+Fk=
 =u/FI
 -----END PGP SIGNATURE-----

Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...
2014-04-05 15:37:40 -07:00
Linus Torvalds 235c7b9feb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull main powerpc updates from Ben Herrenschmidt:
 "This time around, the powerpc merges are going to be a little bit more
  complicated than usual.

  This is the main pull request with most of the work for this merge
  window.  I will describe it a bit more further down.

  There is some additional cpuidle driver work, however I haven't
  included it in this tree as it depends on some work in tip/timer-core
  which Thomas accidentally forgot to put in a topic branch.  Since I
  didn't want to carry all of that tip timer stuff in powerpc -next, I
  setup a separate branch on top of Thomas tree with just that cpuidle
  driver in it, and Stephen has been carrying that in next separately
  for a while now.  I'll send a separate pull request for it.

  Additionally, two new pieces in this tree add users for a sysfs API
  that Tejun and Greg have been deprecating in drivers-core-next.
  Thankfully Greg reverted the patch that removes the old API so this
  merge can happen cleanly, but once merged, I will send a patch
  adjusting our new code to the new API so that Greg can send you the
  removal patch.

  Now as for the content of this branch, we have a lot of perf work for
  power8 new counters including support for our new "nest" counters
  (also called 24x7) under pHyp (not natively yet).

  We have new functionality when running under the OPAL firmware
  (non-virtualized or KVM host), such as access to the firmware error
  logs and service processor dumps, system parameters and sensors, along
  with a hwmon driver for the latter.

  There's also a bunch of bug fixes accross the board, some LE fixes,
  and a nice set of selftests for validating our various types of copy
  loops.

  On the Freescale side, we see mostly new chip/board revisions, some
  clock updates, better support for machine checks and debug exceptions,
  etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
  powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
  powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
  powerpc/le: Big endian arguments for ppc_rtas()
  powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
  powerpc/defconfigs: Enable THP in pseries defconfig
  powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
  powerpc: Rate-limit users spamming kernel log buffer
  powerpc/perf: Fix handling of L3 events with bank == 1
  powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
  powerpc/perf: Add kconfig option for hypervisor provided counters
  powerpc/perf: Add support for the hv 24x7 interface
  powerpc/perf: Add support for the hv gpci (get performance counter info) interface
  powerpc/perf: Add macros for defining event fields & formats
  powerpc/perf: Add a shared interface to get gpci version and capabilities
  powerpc/perf: Add 24x7 interface headers
  powerpc/perf: Add hv_gpci interface header
  powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
  sysfs: create bin_attributes under the requested group
  powerpc/perf: Enable BHRB access for EBB events
  powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
  ...
2014-04-02 13:42:59 -07:00
Jean Delvare 6d956e422b watchdog: Fix Elan SC520 dependencies
Anyone using a system based on an AMD Elan SC520 processor would be
building a dedicated kernel for it, so we can make the sc520_wdt
driver depend on MELAN. SC520_CPUFREQ already depends on MELAN so it
makes things more consistent. It also makes kernel configuration for
every other x86 user easier.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:36:12 +02:00
Jean Delvare 996735ffd4 watchdog: ib700wdt: Use platform_driver_probe
Using platform_driver_probe instead of platform_driver_register has
two benefits:
* The driver will fail to load if device probing fails.
* The probe function can be marked __init.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:35:26 +02:00
Jean Delvare 78411be4c7 watchdog: geodewdt: Use platform_driver_probe
Using platform_driver_probe instead of platform_driver_register has
two benefits:
* The driver will fail to load if device probing fails.
* The probe function can be marked __init.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:35:05 +02:00
Jean Delvare acaaaf62c9 watchdog: advantechwdt: Use platform_driver_probe
Using platform_driver_probe instead of platform_driver_register has
two benefits:
* The driver will fail to load if device probing fails.
* The probe function can be marked __init.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:34:44 +02:00
Jean Delvare b0e0b4b598 watchdog: acquirewdt: Use platform_driver_probe
Using platform_driver_probe instead of platform_driver_register has
two benefits:
* The driver will fail to load if device probing fails.
* The probe function can be marked __init.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:34:30 +02:00
Jean Delvare c90789baa8 watchdog: iTCO_wdt: Fix the parent device
The watchdog's parent is iTCO_wdt (the platform device) not lpc_ich
(the PCI device.) Setting the parent right makes it much easier for
the user to figure out which driver/module is handling the watchdog
device node.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:34:13 +02:00
Marc van der Wal 0bcd0b6a47 watchdog: it87_wdt: Work around non-working CIR interrupts
On some hardware platforms, the it87_wdt watchdog resets the machine
despite the watchdog daemon running and writing to /dev/watchdog.

This is due to Consumer IR buffer underrun interrupts being used as
triggers to reset the timer.  On some buggy hardware implementations
such as the iEi AFL-12A-N270 single-board computer, this method does
not work.

However, resetting the timer by writing its original timeout value in
its configuration register over and over again suppresses the unwanted
reboots.

Add a module option (nocir), 0 by default in order not to break existing
setups.  Setting it to 1 enables the workaround.

Fixes bug #42801 <https://bugzilla.kernel.org/show_bug.cgi?id=42801>.
Tested primarily on Linux 3.5.7, applies cleanly on Linux 3.13.5.

Signed-off-by: Marc van der Wal <x0r+kernel@x0r.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:33:55 +02:00
Markus Mayer 5e82ec94ac watchdog: bcm281xx: Fix Kconfig dependency
Use more the applicable ARCH_BCM_MOBILE option instead of ARCH_BCM as
dependency for bcm_kona_wdt.c.

Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:33:36 +02:00
Sachin Kamat 01b6af9159 watchdog: s3c2410_wdt: Check return value of clk_prepare_enable
clk_prepare_enable can fail. Check its return value.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:33:16 +02:00
Sachin Kamat a94dd879e2 watchdog: s3c2410_wdt: Remove unneeded initialization
Initializing clk to NULL as a reset/error condition does not
help as NULL is not an invalid condition w.r.t clk. Remove this
initialization altogether as there is no state retention.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:32:34 +02:00
Maxime Ripard b0f1d8bec7 watchdog: sunxi: Change compatibles
The Allwinner A10 and A31 compatibles were following a slightly different
compatible patterns than the rest of the SoCs for historical reasons. Change
the compatibles to match the other pattern in the watchdog controller driver
for consistency.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:32:03 +02:00
Sebastian Hesselbarth 0187cca30c watchdog: orion: prepare new Dove DT Kconfig variable
DT-enabled Dove will move over from ARCH_DOVE in mach-dove to MACH_DOVE in
mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new
DT-only MACH_DOVE Kconfig.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:31:37 +02:00
Jingoo Han 5f5e19093b watchdog: fix checkpatch warnings and error
Fix the following checkpatch warnings and error:
  WARNING: quoted string split across lines
  WARNING: braces {} are not necessary for single statement blocks
  WARNING: __initdata should be placed after ibmasr_id_table[]
  WARNING: please, no space before tabs
  ERROR: do not initialise statics to 0 or NULL

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:31:06 +02:00
Andrew Chew c33a15974c watchdog: Add tegra watchdog
Add a driver for the hardware watchdogs in NVIDIA Tegra SoCs (Tegra30 and
later).  This driver will configure one watchdog timer that will reset the
system in the case of a watchdog timeout.

This driver binds to the nvidia,tegra30-timer device node and gets its
register base from there.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:30:29 +02:00
Michal Simek 8d6a140b5f watchdog: xilinx: Remove no_timeout variable
Remove no_timeout variable and check variables
directly.

Suggested-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:31 +02:00
Michal Simek c9dcf9f2ea watchdog: xilinx: Enable this driver for Zynq
Enable this driver for Zynq.
Move it to architecture independent Kconfig part.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:28 +02:00
Michal Simek 75b3c5a827 watchdog: xilinx: Use correct comment indentation
No functional changes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:21 +02:00
Michal Simek 2e79a36847 watchdog: xilinx: Use of_property_read_u32
Use of_property_read_u32 functions to clean probe function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:18 +02:00
Michal Simek 4c7fbbc4a5 watchdog: xilinx: Fix all printk messages
Use dev_ functions for printk messages.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:14 +02:00
Michal Simek 9066317178 watchdog: xilinx: Allocate private structure per device
Only one watchdog could be used by this driver.
Create driver private data structure and move there
all variables for one instance.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:11 +02:00
Michal Simek ffb8eee4f1 watchdog: xilinx: Move no_timeout to probe function
no_timeout should be local variable because it is used
only in probe function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:08 +02:00
Michal Simek f06cdfd184 watchdog: xilinx: Simplify probe and remove functions
Use devm_ helper function to simplify probe and error path.
Move ioremap to the beginning of probe function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:04 +02:00
Michal Simek 5cf4e69d39 watchdog: xilinx: Move control_status_reg to functions
control_status_reg is temp variables and should be
used locally by specific function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:00 +02:00
Michal Simek d14fd96455 watchdog: xilinx: Convert driver to the watchdog framework
- Remove uneeded headers, fops functions
- Use xilinx_wdt prefix in start/stop/keepalive functions
  and in new structures

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:28:56 +02:00
Alexander Shiyan 70605d9bab watchdog: wdt285: Fix variable type
Variable "new_margin" is checked in the function watchdog_ioctl()
to be non-negative, so change its type to "int".

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:28:20 +02:00
Alexander Shiyan 1cf8a3487d watchdog: shwdt: Remove unused variable
Variable "wdt" is not used anywhere in the function sh_wdt_remove().
This patch removes this variable.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:28:00 +02:00
Alexander Shiyan a9ba8376e9 watchdog: sc520_wdt: Remove unused variable
Variable "dummy" is not used anywhere in the function wdt_config().
This patch removes this variable.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:27:34 +02:00
Alexander Shiyan c303ca8765 watchdog: intel_scu_watchdog: Remove unused variable
Variable "hw_pre_value" is not used anywhere in the
function intel_scu_set_heartbeat().
This patch removes this variable.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:26:56 +02:00
Alexander Shiyan 0c29c2e850 watchdog: indydog: Simplify indydog_{start,stop}
This patch simplify functions indydog_start() and indydog_stop()
a bit and removes excess intermediate variable.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:26:31 +02:00
Alexander Shiyan 7bce7c011e watchdog: bcm63xx_wdt: Remove unused field from bcm63xx_wdt_device
Field "default_ticks" is not used anywhere in the driver code.
This patch removes this field.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:26:04 +02:00
Jingoo Han 9d11e4f8c3 watchdog: sp805_wdt: Use devm_ioremap_resource()
Use devm_ioremap_resource() in order to make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:24:57 +02:00
Jingoo Han 6e27206139 watchdog: omap_wdt: Use devm_ioremap_resource()
Use devm_ioremap_resource() in order to make the code simpler,
and remove 'struct resource *mem' from 'struct omap_wdt_dev'
and omap_wdt_probe(), resplectively. because the 'mem' variables
are not used anymore. Also the redundant return value check of
platform_get_resource() is removed, because the value is checked
by devm_ioremap_resource().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:24:31 +02:00
Jingoo Han 4f6120b014 watchdog: ep93xx_wdt: Use devm_ioremap_resource()
Use devm_ioremap_resource() in order to make the code simpler,
and remove redundant return value check of platform_get_resource()
because the value is checked by devm_ioremap_resource().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:24:14 +02:00
Jingoo Han a17fb5cbee watchdog: ts72xx_wdt: make 'ts72xx_wdt_pdev' static
Make 'ts72xx_wdt_pdev' static, because it is used only in this
file. It also fixes the following sparse warning.

  warning: symbol 'ts72xx_wdt_pdev' was not declared. Should it be static?

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:23:46 +02:00