Commit Graph

25 Commits

Author SHA1 Message Date
Russell King 1937f5b918 ARM: fix sa1100 build
Fix:

arch/arm/mach-sa1100/generic.c:117: error: redefinition of 'cpufreq_get'
include/linux/cpufreq.h:299: error: previous definition of 'cpufreq_get' was here

cpufreq_get() is used on these platforms to tell drivers what the CPU
frequency is, and therefore the bus frequency - which is critical for
setting the PCMCIA and LCD timings.  Adding ifdefs to these drivers to
select cpufreq_get() or some other interface adds confusion.  Making
these drivers use some other interface for the normal paths and cpufreq
stuff for the cpufreq notifier is insane as well.

(Why x86 can't provide a version of cpufreq_get() which returns the
CPU frequency when CPUFREQ is disabled is beyond me, rather than
requiring a dummy zero-returning cpufreq_get().  Especially as they
do:

			unsigned long khz = cpufreq_get(cpu);
			if (!khz)
				khz = tsc_khz;

In other words, if CPUFREQ is disabled, get it from tsc_khz - why
not provide a dummy cpufreq_get() which returns tsc_khz?)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-13 19:38:08 +00:00
Russell King 7a5b4e16c8 ARM: sa11x0: convert set_xxx_data() to register_xxx()
Only register devices if we have platform data for those which require
platform data.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06 16:52:23 +00:00
Uwe Kleine-König bcc8f3e01f rename platform_driver name "flash" to "sa1100-mtd"
"flash" is a very generic name for a platform_driver that is only
available on SA11x0.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Nicolas Pitre <nico@marvell.com>
2009-01-31 01:21:58 +01:00
Linus Torvalds 7cc4e87f91 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
	arch/arm/mach-versatile/core.c
	sound/soc/pxa/pxa2xx-ac97.c
	sound/soc/pxa/pxa2xx-i2s.c
manually.
2008-10-11 10:09:45 -07:00
Kristoffer Ericson bda0308609 [ARM] 5270/1: Fix Formatting in mach-sa1100/ machine files
This patch fixes formatting issues in mach-sa1100/
machine files. More specificly badge4.c,generic.c and
pleb.c.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01 22:29:43 +01:00
David Howells b4f151ff89 MN10300: Move asm-arm/cnt32_to_63.h to include/linux/
Move asm-arm/cnt32_to_63.h to include/linux/ so that MN10300 can make
use of it too.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-24 16:38:17 -07:00
Russell King afd2fc02ab Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
Conflicts:

	arch/arm/mach-pxa/generic.c
	arch/arm/mach-pxa/pxa25x.c
	arch/arm/mach-pxa/pxa27x.c
	arch/arm/mach-pxa/pxa2xx.c
	arch/arm/mach-pxa/pxa3xx.c
	arch/arm/mach-pxa/reset.c
	arch/arm/mach-pxa/spitz.c
	arch/arm/mach-pxa/tosa.c
	drivers/watchdog/sa1100_wdt.c
2008-08-07 11:06:47 +01:00
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Eric Miao 04fef228fb [ARM] pxa: introduce reset_status and clear_reset_status for driver's usage
Due to the problem of reset status bits being handled by different
registers between pxa2xx and pxa3xx, introduce a global reset_status
variable, initialized by SoC-specific code and later being used by
other drivers.

And also introduce clear_reset_status(), which is used to clear the
corresponding status bits. Pass RESET_STATUS_ALL to clear all bits.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-08-05 09:26:02 +08:00
Dmitry Baryshkov 45528e3817 [ARM] 4961/1: gpiolib support for SA-1100 architecture
This adds gpiolib support for the SA-1100 arch:
 - Move all GPIO API functions from generic.c into gpio.c
 - Convert all gpio functions into gpiolib callbacks.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10 15:31:37 +01:00
Kristoffer Ericson 85e6c7a7db [ARM] 4810/1: - Fix 'section mismatch' building warnings
Warning message :
WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove')
WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove')

* fixes the 'section mismatch' building warnings for target sa1100. Solution is __init -> __devinit. Thanks to Randy Dunlap for pointing out the solution.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:14:07 +00:00
David Brownell aeb3f6d10e [PATCH] gpio_direction_output-needs-an-initial-value fix
Build fix:  sa1100/generic.c should already have included <asm/gpio.h>,
but it didn't ... causing a build problem with a recent patch.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-18 11:35:08 -07:00
David Brownell 28735a7253 [PATCH] gpio_direction_output() needs an initial value
It's been pointed out that output GPIOs should have an initial value, to
avoid signal glitching ...  among other things, it can be some time before
a driver is ready.  This patch corrects that oversight, fixing

 - documentation
 - platforms supporting the GPIO interface
 - users of that call (just one for now, others are pending)

There's only one user of this call for now since most platforms are still
using non-generic GPIO setup code, which in most cases already couples the
initial value with its "set output mode" request.

Note that most platforms are clear about the hardware letting the output
value be set before the pin direction is changed, but the s3c241x docs are
vague on that topic ...  so those chips might not avoid the glitches.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Acked-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-16 19:25:04 -07:00
Philipp Zabel 5b7e42b2d3 [PATCH] GPIO API: SA1100 wrapper cleanup
Based on the discussion last december (http://lkml.org/lkml/2006/12/20/241),
this patch
  - adds gpio_direction_input/output functions to
    generic.c instead of making them inline,
  - fixes comment and includes and uses inline functions
    instead of macros in gpio.h

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20 17:10:16 -08:00
Nicolas Pitre 2f1675c11a [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period
This provides a 63 bit clock counter guaranteed to be monotonic over a
period of 370 days instead of a clock wrap every 19.4 minutes, as long
as sched_clock() is called at least once every 9.7 minutes which
shouldn't be a problem in practice.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07 16:06:50 +00:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Richard Purdie e842f1c8ff [PATCH] RTC subsystem: SA1100/PXA2XX driver
Add an RTC subsystem driver for the ARM SA1100/PXA2XX processor RTC.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:52 -08:00
Linus Torvalds 4fd5f8267d Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31 07:32:56 -08:00
Tim Schmielau 4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00
Russell King d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Russell King 14e66f767f [ARM] Allow MTD device name to be passed via platform data
Allow SA1100 devices to pass the name of the flash device to the
SA1100 map driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29 16:08:31 +01:00
Deepak Saxena 92519d8282 [ARM] 2992/1: Replace map_desc.physical with map_desc.pfn: SA1100
Patch from Deepak Saxena

SA1100 map_desc.pfn conversion

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 15:19:04 +01:00
Russell King 323cdfc191 [MFD] Add SA11x0 MCP platform device support
Add platform device data for the SA11x0 MCP device.  This allows
platforms to customise the configuration of the SA11x0 MCP device
according to their needs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 10:10:46 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00