Commit Graph

2787 Commits

Author SHA1 Message Date
Masahiro Yamada a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Linus Torvalds 0c67f6b297 More power management updates for 5.8-rc1
- Add support for interconnect bandwidth to the OPP core (Georgi
    Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
 
  - Add support for regulator enable/disable to the OPP core (Kamil
    Konieczny).
 
  - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
 
  - Make the tegra186 cpufreq driver set the
    CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
 
  - Prevent the ACPI power management from using power resources
    with devices where the list of power resources for power state
    D0 (full power) is missing (Rafael Wysocki).
 
  - Annotate a hibernation-related function with __init (Christophe
    JAILLET).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl7g/zESHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxZzgP+wTBW/WVLVkrlk2tQhcbbj+y9TNNOfU1
 FZ9C56bR+5VJhrrxTxVHeQP7PDCNxqVM57M8Bcnl3I0LFi+OHNAqkN/xW323N7ZA
 8OGkFgeqSxgG21691rTEwVnwwhdvQsNw47Fqjbu10PiNFYm6W8YNI5JMQRxfTVHb
 H8Nt7xcJ5i7wnMRnAyrotnTUYmS3nZ7IwpHFEoM2SwWCqlYr0h9rDqKz3MvbiE59
 m0G+4tFUv8egyshzwMD78PeFG+7iZP9s4uovsKujj4UGskmAVn9BGP0vI5AJiS4b
 9KdrDNdX5NAEBFn5eDVzZSMzYhRI3pebd306oWUS+A4/rDA+BtC4ECkaWKE6IlX6
 pmJuY5w8mZU0geH+W2xJQp6t/f60XJymEYKu88opm69ujgJL8X2PglWNq8tal6iX
 BfaPNMla+0mNt9L+GzIb6v5f/nbNBQ8qe6vXlQndqcxxerIBPktLTP+j18FzN9N4
 4XOyFJYoauvfMidK8+fjGlSGi54GnlseopNcVTD6IRjRkXhYYJE62oTfgoFe1DIs
 7pFyEtnTgA0Ma9h1CMs2/UwaL1Xule4HMZzdeAnkelAAivdJI181XU0k3Y6vuNwA
 4IXkpMph8utvWX/Dp+OH0a5YGvpEAuihwe8a2Ld/VtOGVINh4hVQucU/yrGN6EIJ
 Od7S+Zua3bR6
 =p5eu
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These are operating performance points (OPP) framework updates mostly,
  including support for interconnect bandwidth in the OPP core, plus a
  few cpufreq changes, including boost support in the CPPC cpufreq
  driver, an ACPI device power management fix and a hibernation code
  cleanup.

  Specifics:

   - Add support for interconnect bandwidth to the OPP core (Georgi
     Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).

   - Add support for regulator enable/disable to the OPP core (Kamil
     Konieczny).

   - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).

   - Make the tegra186 cpufreq driver set the
     CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).

   - Prevent the ACPI power management from using power resources with
     devices where the list of power resources for power state D0 (full
     power) is missing (Rafael Wysocki).

   - Annotate a hibernation-related function with __init (Christophe
     JAILLET)"

* tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Avoid using power resources if there are none for D0
  cpufreq: CPPC: add SW BOOST support
  cpufreq: change '.set_boost' to act on one policy
  PM: hibernate: Add __init annotation to swsusp_header_init()
  opp: Don't parse icc paths unnecessarily
  opp: Remove bandwidth votes when target_freq is zero
  opp: core: add regulators enable and disable
  opp: Reorder the code for !target_freq case
  opp: Expose bandwidth information via debugfs
  cpufreq: dt: Add support for interconnect bandwidth scaling
  opp: Update the bandwidth on OPP frequency changes
  opp: Add sanity checks in _read_opp_key()
  opp: Add support for parsing interconnect bandwidth
  cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  OPP: Add helpers for reading the binding properties
  dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-10 14:04:39 -07:00
Rafael J. Wysocki 50dd154ed7 Merge branches 'pm-cpufreq' and 'pm-acpi'
* pm-cpufreq:
  cpufreq: CPPC: add SW BOOST support
  cpufreq: change '.set_boost' to act on one policy
  cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag

* pm-acpi:
  ACPI: PM: Avoid using power resources if there are none for D0
2020-06-10 17:10:40 +02:00
Rafael J. Wysocki 4c277e2f85 Merge branch 'pm-opp'
* pm-opp:
  opp: Don't parse icc paths unnecessarily
  opp: Remove bandwidth votes when target_freq is zero
  opp: core: add regulators enable and disable
  opp: Reorder the code for !target_freq case
  opp: Expose bandwidth information via debugfs
  cpufreq: dt: Add support for interconnect bandwidth scaling
  opp: Update the bandwidth on OPP frequency changes
  opp: Add sanity checks in _read_opp_key()
  opp: Add support for parsing interconnect bandwidth
  interconnect: Remove unused module exit code from core
  interconnect: Disallow interconnect core to be built as a module
  interconnect: Add of_icc_get_by_index() helper function
  OPP: Add helpers for reading the binding properties
  dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-10 17:10:30 +02:00
Xiongfeng Wang 54e74df5d7 cpufreq: CPPC: add SW BOOST support
To add SW BOOST support for CPPC, we need to get the max frequency of
boost mode and non-boost mode. ACPI spec 6.2 section 8.4.7.1 describes
the following two CPC registers.

"Highest performance is the absolute maximum performance an individual
processor may reach, assuming ideal conditions. This performance level
may not be sustainable for long durations, and may only be achievable if
other platform components are in a specific state; for example, it may
require other processors be in an idle state.

Nominal Performance is the maximum sustained performance level of the
processor, assuming ideal operating conditions. In absence of an
external constraint (power, thermal, etc.) this is the performance level
the platform is expected to be able to maintain continuously. All
processors are expected to be able to sustain their nominal performance
state simultaneously."

To add SW BOOST support for CPPC, we can use Highest Performance as the
max performance in boost mode and Nominal Performance as the max
performance in non-boost mode. If the Highest Performance is greater
than the Nominal Performance, we assume SW BOOST is supported.

The current CPPC driver does not support SW BOOST and use 'Highest
Performance' as the max performance the CPU can achieve. 'Nominal
Performance' is used to convert 'performance' to 'frequency'. That
means, if firmware enable boost and provide a value for Highest
Performance which is greater than Nominal Performance, boost feature is
enabled by default.

Because SW BOOST is disabled by default, so, after this patch, boost
feature is disabled by default even if boost is enabled by firmware.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-05 14:20:02 +02:00
Xiongfeng Wang cf6fada715 cpufreq: change '.set_boost' to act on one policy
Macro 'for_each_active_policy()' is defined internally. To avoid some
cpufreq driver needing this macro to iterate over all the policies in
'.set_boost' callback, we redefine '.set_boost' to act on only one
policy and pass the policy as an argument.

'cpufreq_boost_trigger_state()' iterates over all the policies to set
boost for the system.

This is preparation for adding SW BOOST support for CPPC.

To protect Boost enable/disable by sysfs from CPU online/offline,
add 'cpu_hotplug_lock' before calling '.set_boost' for each CPU.

Also move the lock from 'set_boost()' to 'store_cpb()' in
acpi_cpufreq.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-05 14:20:02 +02:00
Linus Torvalds 828f3e18e1 ARM/SoC: drivers for v5.7
These are updates to SoC specific drivers that did not have
 another subsystem maintainer tree to go through for some
 reason:
 
 - Some bus and memory drivers for the MIPS P5600 based
   Baikal-T1 SoC that is getting added through the MIPS tree.
 
 - There are new soc_device identification drivers for TI K3,
   Qualcomm MSM8939
 
 - New reset controller drivers for NXP i.MX8MP, Renesas
   RZ/G1H, and Hisilicon hi6220
 
 - The SCMI firmware interface can now work across ARM SMC/HVC
   as a transport.
 
 - Mediatek platforms now use a new driver for their "MMSYS"
   hardware block that controls clocks and some other aspects
   in behalf of the media and gpu drivers.
 
 - Some Tegra processors have improved power management
   support, including getting woken up by the PMIC and cluster
   power down during idle.
 
 - A new v4l staging driver for Tegra is added.
 
 - Cleanups and minor bugfixes for TI, NXP, Hisilicon,
   Mediatek, and Tegra.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl7XvgAACgkQmmx57+YA
 GNmj/hAAnAJ/hYehLfgCe711HUntgeRkaoTVpCt8BJNMdxsa23sn3V6k5+WYn1uG
 PtlgpefZEMHLUEEVDegR4nZXLG0Pzu1SR12KW34YPcQKkNo/+vlQ9zYUajnJ/KX6
 10zdLSIzHfk1VtXKvvQQ8xFyE+S/trGmjC57E6gfoCUT3rl1maD+ccVXUBaz9oob
 wuMxGXQAl57mio5yT1OfSk6Fev39xRE2dN1hzP7KUYhsemZajBwBBW5wVJZCsCB8
 LCGmxVkavM7BV4r2NokbBDs5rlfedBl/P/IPd9Is5a5tuGUkSsVRG9zqShxYLGM3
 S06az6POQFwXKFJoUKW0dK/Koy0D7BK+vhUBPzFv4HZ8iDCVf6Jju2MJ02GMqHPj
 OOrXaCbLYrvN/edVUWeeFywqwMbYTRwC4DxyTq5m7HxEB004xTOhs0rX5aR0u4n1
 bbsR97LguolwH9iEMzd3F3jCiKBcMecH3lAh5WcrtwlFIRrNhbWoGDoA/4TuORFS
 b11rgsTRIJ5Vc++D1HnSnx0ZZvUzyluMvygdALnSgVah6xYe6KVw9Kg/wioAJ04G
 uSTidqP3qRhsyET2HQo7CxdVfZbKfP25iKCKrdhQziztKvhF8qrUmZKloXOodRw+
 ewYSRmv8c324OYYit1X43oAdW8dntq1XbSIauaqxEb4JC7x/xRY=
 =44Jc
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM/SoC driver updates from Arnd Bergmann:
 "These are updates to SoC specific drivers that did not have another
  subsystem maintainer tree to go through for some reason:

   - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
     that is getting added through the MIPS tree.

   - There are new soc_device identification drivers for TI K3, Qualcomm
     MSM8939

   - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
     Hisilicon hi6220

   - The SCMI firmware interface can now work across ARM SMC/HVC as a
     transport.

   - Mediatek platforms now use a new driver for their "MMSYS" hardware
     block that controls clocks and some other aspects in behalf of the
     media and gpu drivers.

   - Some Tegra processors have improved power management support,
     including getting woken up by the PMIC and cluster power down
     during idle.

   - A new v4l staging driver for Tegra is added.

   - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
     Tegra"

* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
  clk: sprd: fix compile-testing
  bus: bt1-axi: Build the driver into the kernel
  bus: bt1-apb: Build the driver into the kernel
  bus: bt1-axi: Use sysfs_streq instead of strncmp
  bus: bt1-axi: Optimize the return points in the driver
  bus: bt1-apb: Use sysfs_streq instead of strncmp
  bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
  bus: bt1-apb: Fix show/store callback identations
  bus: bt1-apb: Include linux/io.h
  dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
  memory: Add Baikal-T1 L2-cache Control Block driver
  bus: Add Baikal-T1 APB-bus driver
  bus: Add Baikal-T1 AXI-bus driver
  dt-bindings: bus: Add Baikal-T1 APB-bus binding
  dt-bindings: bus: Add Baikal-T1 AXI-bus binding
  staging: tegra-video: fix V4L2 dependency
  tee: fix crypto select
  drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
  soc: ti: add k3 platforms chipid module driver
  dt-bindings: soc: ti: add binding for k3 platforms chipid module
  ...
2020-06-04 19:56:20 -07:00
Linus Torvalds 8226f11318 MIPS updates for v5.8:
- added support for MIPSr5 and P5600 cores
 - converted Loongson PCI driver into a PCI host driver using the generic
   PCI framework
 - added emulation of CPUCFG command for Loogonson64 cpus
 - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA
 - ioremap cleanup
 - fix for a race between two threads faulting the same page
 - various cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl7WK54aHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHAbjA/9EEFeqNg9UNUH6/TS18QV
 qkxKp0+LC4Jk+SduzLyYsYy6l/dSaKYl8m9jyJsWjM6BvBZTcMJJOnzIPRafI0s+
 MK8GCSZunAkm25DsDvfobQUkbQ/UHjY/fuRpNslbDcsYqIKv90hUMd21ccXY6KC5
 RY+aMlpjgksg1X8JJ7k1Rs05sXyUPqpESteyqehF1b/+Iyv7H2L3v5EvQwvPDs6f
 TyVgNJU2B3RCU6/uAcWmHdVLxXd+Y8fM0vC8DCO0pg0rGf4be0FbZztHmeq6r2wy
 g7wsO7acKWGzulFQD5ftVSQ6i8KHIDNDePmDMtU5oFcXkzUDdGvd3j3Gst19/nve
 ZftNmQHOY1JqGUOhdq1fDG/4M3Vc5bvh3W6eMG22TuMLEWsOF8teY8uUa/vxOb+B
 2NsJ9q6ylRS7RDWWOrApJWfFYPvhr5wlLxT+azWNa9y3bjV8vDLjNdU0mRLA1nsu
 yLzYMwIhtWfZhkJZ+xJVSmQ6LjAHDN5TF/LEx/9itLg5t9wrEosFPAtOv8V15hy4
 KBNvvWeoy7RRmBTNuKh7r9Ui4jw7GgxL4D1OwzCsF//GAiGyuuh0zMuUE8EXA6K5
 MpdGt+bSOcLl8ILTtGir8e4MXLawDH8n94f8QWLb9FcOvU4KHUjRKU7EQ6dyD5dk
 a7xskGLXWdVO3IJ/Xvxcaeo=
 =eAtN
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for MIPSr5 and P5600 cores

 - converted Loongson PCI driver into a PCI host driver using the
   generic PCI framework

 - added emulation of CPUCFG command for Loogonson64 cpus

 - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA

 - ioremap cleanup

 - fix for a race between two threads faulting the same page

 - various cleanups and fixes

* tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits)
  MIPS: ralink: drop ralink_clk_init for mt7621
  MIPS: ralink: bootrom: mark a function as __init to save some memory
  MIPS: Loongson64: Reorder CPUCFG model match arms
  MIPS: Expose Loongson CPUCFG availability via HWCAP
  MIPS: Loongson64: Guard against future cores without CPUCFG
  MIPS: Fix build warning about "PTR_STR" redefinition
  MIPS: Loongson64: Remove not used pci.c
  MIPS: Loongson64: Define PCI_IOBASE
  MIPS: CPU_LOONGSON2EF need software to maintain cache consistency
  MIPS: DTS: Fix build errors used with various configs
  MIPS: Loongson64: select NO_EXCEPT_FILL
  MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()
  MIPS: mm: add page valid judgement in function pte_modify
  mm/memory.c: Add memory read privilege on page fault handling
  mm/memory.c: Update local TLB if PTE entry exists
  MIPS: Do not flush tlb page when updating PTE entry
  MIPS: ingenic: Default to a generic board
  MIPS: ingenic: Add support for GCW Zero prototype
  MIPS: ingenic: DTS: Add memory info of GCW Zero
  MIPS: Loongson64: Switch to generic PCI driver
  ...
2020-06-03 13:32:21 -07:00
Rafael J. Wysocki 73e5f9c0d3 Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for v5.8-rc1 (part 2) from Viresh Kumar:

"This contains a single patch to enable CPUFREQ_NEED_INITIAL_FREQ_CHECK
 flag for tegra driver."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
2020-06-01 18:10:43 +02:00
Rafael J. Wysocki 4573e9ef51 Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework changes for v5.8
from Viresh Kumar:

"This contains:

 - support for interconnect bandwidth in the OPP core (Georgi Djakov,
   Saravana Kannan, Sibi Sankar, Viresh Kumar).

 - support for regulator enable/disable (Kamil Konieczny).

 This is based on three patches from the interconnect tree which
 shall get merged via Greg's tree."

* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  opp: Don't parse icc paths unnecessarily
  opp: Remove bandwidth votes when target_freq is zero
  opp: core: add regulators enable and disable
  opp: Reorder the code for !target_freq case
  opp: Expose bandwidth information via debugfs
  cpufreq: dt: Add support for interconnect bandwidth scaling
  opp: Update the bandwidth on OPP frequency changes
  opp: Add sanity checks in _read_opp_key()
  opp: Add support for parsing interconnect bandwidth
  interconnect: Remove unused module exit code from core
  interconnect: Disallow interconnect core to be built as a module
  interconnect: Add of_icc_get_by_index() helper function
  OPP: Add helpers for reading the binding properties
  dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-01 12:54:18 +02:00
Georgi Djakov 8b17f17a09 cpufreq: dt: Add support for interconnect bandwidth scaling
In addition to clocks and regulators, some devices can scale the bandwidth
of their on-chip interconnect - for example between CPU and DDR memory. Add
support for that, so that platforms which support it can make use of it.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[ Viresh: Reused dev_pm_opp_of_find_icc_paths(). Also drop the depends
	  on from Kconfig. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

fixup! cpufreq: dt: Add support for interconnect bandwidth scaling
2020-05-29 10:15:12 +05:30
Arnd Bergmann 9b127573b4 cpufreq: Changes for v5.8-rc1
This change move Tegra20 and Tegra30 to the generic DT CPU frequency
 scaling driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl6+ol0THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoQLuEACo5eQjX2cWRFjkpi3DKBmHRK3gfI9s
 /JHO1G/0kgNM9md6E0Rt/NCIoLAKOJ2OW/6l6pA3kKbLznOZxloxo8QKnywPjhLD
 FfRhTL89Kux2scorKQgsLrvKFr1bUuwqFEEO98G5JnExsUtSnXr+6lS7A59UEn3E
 ZWGfZiIsg1H0QKHjKpQoX0dNUdvfHcCW4LX9d81vh9bBr4ofDDyZEUqsVnP/q8kP
 9UIgNDA5tcPFTP+lSr6ntJZ8L+uqwk1Sa5+xSbD9g6xo9R/chuFO1asOXmJTl1Jl
 y0emtVmuOEdCKGuwN5kKg5IQcBISYusxhtTqjRAm7pk5skVAtmFVs6g/o0F6lr3B
 c2yKWpOABAIycoUY9URAwjQm5HcF3IJKFN6s5JlY0LzIKWNINrHG27lr4Zz1UdQe
 dVbwU3kwNdh5GEWr9rr7X6ms+y8Jh637yaVGIfuFPIKthPDqxSg6TbWLxvcv/LRU
 p3PLFoYaGb4Lte6aJA01ArQaOZTrQySlSacH14FLh+u2KFmpxx+jCzx/cxZ17zOw
 9PsDELPo9cDQbw77zj+lgrckSZ7zneJckCDF0MZVmz+HzhVYjKOOT42X5ij3xkKp
 Fpe9KLFfTCaYOAaAY8YbHyFbYb0d16jWn/5/b483t0pe9y/L0g3FMm7Q0uFL2YeN
 KqMeCL2FemBODg==
 =ru90
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.8-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

cpufreq: Changes for v5.8-rc1

This change move Tegra20 and Tegra30 to the generic DT CPU frequency
scaling driver.

* tag 'tegra-for-5.8-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)

Link: https://lore.kernel.org/r/20200515145311.1580134-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-25 23:24:56 +02:00
Rafael J. Wysocki 552abb884e cpufreq: Fix up cpufreq_boost_set_sw()
After commit 18c49926c4 ("cpufreq: Add QoS requests for userspace
constraints") the return value of freq_qos_update_request(), that can
be 1, passed by cpufreq_boost_set_sw() to its caller sometimes
confuses the latter, which only expects to see 0 or negative error
codes, so notice that cpufreq_boost_set_sw() can return an error code
(which should not be -EINVAL for that matter) as soon as the first
policy without a frequency table is found (because either all policies
have a frequency table or none of them have it) and rework it to meet
its caller's expectations.

Fixes: 18c49926c4 ("cpufreq: Add QoS requests for userspace constraints")
Reported-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-18 13:01:28 +02:00
Mian Yousaf Kaukab 6cc3d0e9a0 cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
The driver doesn't provide ->get() method to read current frequency and
the frequency is set to 0 at initialization which makes the driver fail
at initialization time.

Set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag for the driver, so the
cpufreq core checks for the unlisted frequency and sets the CPU to a
valid frequency from the frequency table.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
[ Viresh: Massaged change log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-05-18 10:58:40 +05:30
Rafael J. Wysocki 3f8ffb14ea Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for v5.8 from Viresh Kumar:

"- Build OMAP cpufreq driver by default for ARCH_OMAP2PLUS platform
  (Anders Roxell).

- Fix compatible bindings for qcom cpufreq driver (Ansuel Smith).

- Update qoriq cpufreq driver to automatically loaded when built as
  module and related changes (Mian Yousaf Kaukab and Geert
  Uytterhoeven).

- Add support for r8a7742 to cpufreq-dt platform driver (Lad
  Prabhakar).

- Add support for i.MX7ULP to imx cpufreq driver (Peng Fan)."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: qoriq: Add platform dependencies
  clk: qoriq: add cpufreq platform device
  cpufreq: qoriq: convert to a platform driver
  cpufreq: qcom: fix wrong compatible binding
  cpufreq: imx-cpufreq-dt: support i.MX7ULP
  cpufreq: dt: Add support for r8a7742
  cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist
  cpufreq: omap: Build driver by default for ARCH_OMAP2PLUS
2020-05-12 16:21:03 +02:00
Geert Uytterhoeven 1f1755af4f cpufreq: qoriq: Add platform dependencies
The Freescale QorIQ clock controller is only present on Freescale E500MC
and Layerscape SoCs.  Add platform dependencies to the QORIQ_CPUFREQ
config symbol, to avoid asking the user about it when configuring a
kernel without E500MC or Layerscape support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-05-08 10:53:10 +05:30
Mian Yousaf Kaukab 157f527639 cpufreq: qoriq: convert to a platform driver
The driver has to be manually loaded if it is built as a module. It
is neither exporting MODULE_DEVICE_TABLE nor MODULE_ALIAS. Moreover,
no platform-device is created (and thus no uevent is sent) for the
clockgen nodes it depends on.

Convert the module to a platform driver with its own alias. Moreover,
drop whitelisted SOCs. Platform device will be created only for the
compatible platforms.

Reviewed-by: Yuantian Tang <andy.tang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-05-07 10:47:27 +05:30
Dmitry Osipenko 9ce2746304 cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)
Re-parenting to intermediate clock is supported now by the clock driver
and thus there is no need in a customized CPUFreq driver, all that code
is common for both Tegra20 and Tegra30. The available CPU freqs are now
specified in device-tree in a form of OPPs, all users should update their
device-trees.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06 18:59:38 +02:00
Ansuel Smith 2dea651680 cpufreq: qcom: fix wrong compatible binding
Binding in Documentation is still "operating-points-v2-kryo-cpu".
Restore the old binding to fix the compatibility problem.

Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-05-04 10:42:44 +05:30
Rafael J. Wysocki 9795a0ddf8 Merge back cpufreq material for v5.8. 2020-05-02 22:00:56 +02:00
Peng Fan 7c2553f0db cpufreq: imx-cpufreq-dt: support i.MX7ULP
i.MX7ULP's ARM core clock design is totally different compared
with i.MX7D/8M SoCs which supported by imx-cpufreq-dt. It needs
get_intermediate and target_intermedate to configure clk MUX ready,
before let OPP configure ARM core clk.
                                          |---FIRC
     |------RUN---...---SCS(MUX2) --------|
ARM --(MUX1)                              |---SPLL_PFD0(CLK_SET_RATE_GATE)
     |------HSRUN--...--HSRUN_SCS(MUX3)---|
                                          |---SRIC

FIRC is step clk, SPLL_PFD0 is the normal clk driving ARM core.
MUX2 and MUX3 share same inputs. So if MUX2/MUX3 both sources from
SPLL_PFD0, both MUXes will lose input when configure SPLL_PFD0.
So the target_intermediate will configure MUX2/MUX3 to FIRC, to avoid
ARM core lose clk when configure SPLL_PFD0.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28 14:26:20 +05:30
Lad Prabhakar a6d1bfa055 cpufreq: dt: Add support for r8a7742
Add the compatible strings for supporting the generic cpufreq driver on
the Renesas RZ/G1H (R8A7742) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28 09:45:55 +05:30
Peng Fan a08e1b6c2d cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist
Add i.MX7ULP to cpufreq-dt-platdev blacklist.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28 09:45:54 +05:30
Anders Roxell 59b55c1f20 cpufreq: omap: Build driver by default for ARCH_OMAP2PLUS
When building the mult_v7_defconfig, ARM_TI_CPUFREQ doesn't get enabled
evenwhen ARCH_OMAP(3|4) is selected. Build ARM_TI_CPUFREQ by default for
ARCH_OMAP2PLUS.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-04-28 09:45:54 +05:30
Chris Wilson 8c539776ac cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
Make a note of the first time we discover the turbo mode has been
disabled by the BIOS, as otherwise we complain every time we try to
update the mode.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-27 10:30:11 +02:00
Rafael J. Wysocki 33aa46f252 cpufreq: intel_pstate: Use passive mode by default without HWP
After recent changes allowing scale-invariant utilization to be
used on x86, the schedutil governor on top of intel_pstate in the
passive mode should be on par with (or better than) the active mode
"powersave" algorithm of intel_pstate on systems in which
hardware-managed P-states (HWP) are not used, so it should not be
necessary to use the internal scaling algorithm in those cases.

Accordingly, modify intel_pstate to start in the passive mode by
default if the processor at hand does not support HWP of if the driver
is requested to avoid using HWP through the kernel command line.

Among other things, that will allow utilization clamps and the
support for RT/DL tasks in the schedutil governor to be utilized on
systems in which intel_pstate is used.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-17 17:04:38 +02:00
Arnd Bergmann c02e963044 mips: loongsoon2ef: remove private clk api
As platforms are moving to COMMON_CLK in general, loongson2ef
stuck out as something that has a private implementation but
does not actually use it except for setting the frequency of
the CPU itself from the loongson2_cpufreq driver.

Change that driver to call the register setting function directly
and remove the rest of the stub implementation.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-04-16 17:34:23 +02:00
Linus Torvalds ef05db16bb Additional power management updates for 5.7-rc1
- Fix corner-case suspend-to-idle wakeup issue on systems where
    the ACPI SCI is shared with another wakeup source (Hans de Goede).
 
  - Add document describing system-wide suspend and resume code flows
    to the admin guide (Rafael Wysocki).
 
  - Add kernel command line option to set pm_debug_messages (Chen Yu).
 
  - Choose schedutil as the preferred scaling governor by default on
    ARM big.LITTLE systems and on x86 systems using the intel_pstate
    driver in the passive mode (Linus Walleij, Rafael Wysocki).
 
  - Drop racy and redundant checks from the PM core's device_prepare()
    routine (Rafael Wysocki).
 
  - Make resume from hibernation take the hibernation_restore() return
    value into account (Dexuan Cui).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl6LN9kSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxqj0P/3Uh16YIKOUeXosqtptJJiWgZoWu82aR
 H2uzc9hCV6k/tnSG/Y3ZGgI4dUZGcJ94By80XoWceZ97CC1YuBHpF/dHSupTCcvt
 tBEP9H2qbSLi9d2PhlEUJ0B6PBpWEjCzOb519Tzj4sd67FGhsKeihXl+WXdgaaKZ
 hpdj+tBkQ6Dxb7CXVw/mUpWlg/nmF+yRqpK5By+V0WMOlQtg4Ecb3lMqaJPr7b4F
 W/I5m4PE9QG+VetSSXoe7CKfLo2fsDtyHH6ioTJ9xklcOflIblZ3MYf3sKgOuuny
 m/6Zm71HmQwWRkjA/V+C/eTr0VX2TuMUALfA8i+uZBo//I58TTJq9oqosu8eao2P
 5MR79Vwa+eqtYRgpHCTM4JO1iyKiE+FTfVAPOS4hHOKjqY9BUj0YtWHxk8abdzQd
 owv9DjEtGKcipAnCKtWDIS9ikZ5TOsYiGgWyJQnoonpFY+0s3DwtRdi+gBLJliSj
 5j7sRv9wJrJRFZ7tRMHHAqoQkSYqf4YdBuRBG7F/M44anveORBJNaTbPgm30qbUP
 FXD9hTJn/4Q2nmBSzqvEv0+TJrWoCyKduzr5uNsR0eyg48w9mrlUDDkW7dOMb3DU
 WV6QGNomMuKIY4DHKCo3/k21NmzW2JN7zhUrErCnl0bXjV2AM71Cb2xjUD1eNOqV
 9LxPDvAmZoGt
 =QFDr
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "Additional power management updates.

  These fix a corner-case suspend-to-idle wakeup issue on systems where
  the ACPI SCI is shared with another wakeup source, add a kernel
  command line option to set pm_debug_messages via the kernel command
  line, add a document desctibing system-wide suspend and resume code
  flows, modify cpufreq Kconfig to choose schedutil as the preferred
  governor by default in a couple of cases and do some assorted
  cleanups.

  Specifics:

   - Fix corner-case suspend-to-idle wakeup issue on systems where the
     ACPI SCI is shared with another wakeup source (Hans de Goede).

   - Add document describing system-wide suspend and resume code flows
     to the admin guide (Rafael Wysocki).

   - Add kernel command line option to set pm_debug_messages (Chen Yu).

   - Choose schedutil as the preferred scaling governor by default on
     ARM big.LITTLE systems and on x86 systems using the intel_pstate
     driver in the passive mode (Linus Walleij, Rafael Wysocki).

   - Drop racy and redundant checks from the PM core's device_prepare()
     routine (Rafael Wysocki).

   - Make resume from hibernation take the hibernation_restore() return
     value into account (Dexuan Cui)"

* tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
  ACPI: PM: Add acpi_[un]register_wakeup_handler()
  Documentation: PM: sleep: Document system-wide suspend code flows
  cpufreq: Select schedutil when using big.LITTLE
  PM: sleep: Add pm_debug_messages kernel command line option
  PM: sleep: core: Drop racy and redundant checks from device_prepare()
  PM: hibernate: Propagate the return value of hibernation_restore()
  cpufreq: intel_pstate: Select schedutil as the default governor
2020-04-06 10:14:39 -07:00
Rafael J. Wysocki 54032b863b Merge branches 'pm-sleep' and 'pm-cpufreq'
* pm-sleep:
  Documentation: PM: sleep: Document system-wide suspend code flows
  PM: sleep: Add pm_debug_messages kernel command line option
  PM: sleep: core: Drop racy and redundant checks from device_prepare()
  PM: hibernate: Propagate the return value of hibernation_restore()

* pm-cpufreq:
  cpufreq: Select schedutil when using big.LITTLE
  cpufreq: intel_pstate: Select schedutil as the default governor
2020-04-06 15:42:05 +02:00
Linus Torvalds d38c07afc3 powerpc updates for 5.7
- A large series from Nick for 64-bit to further rework our exception vectors,
    and rewrite portions of the syscall entry/exit and interrupt return in C. The
    result is much easier to follow code that is also faster in general.
 
  - Cleanup of our ptrace code to split various parts out that had become badly
    intertwined with #ifdefs over the years.
 
  - Changes to our NUMA setup under the PowerVM hypervisor which should
    hopefully avoid non-sensical topologies which can lead to warnings from the
    workqueue code and other problems.
 
  - MAINTAINERS updates to remove some of our old orphan entries and update the
    status of others.
 
  - Quite a few other small changes and fixes all over the map.
 
 Thanks to:
   Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
   Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
   Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
   Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
   Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
   Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
   Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
   Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
   Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
   Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
   Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
   Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
   Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
   Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl6JypATHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgOTyD/0U90tXb3VXlQcc4OFIb8vWIj76k4Zn
 ZSZ7RyOuvb5pCISBZjSK79XkR9eMHT77qagX4V41q64k4yQl8nbgLeVnwL76hLLc
 IJCs23f4nsO0uqX/MhSCc5dfOOOS2i8V+OQYtsYWsH5QaG95v0cHIqVaHHMlfQxu
 507GO/W5W6KTd4x008b5unQOuE51zMKlKvqEJXkT59obQFpaa2S5Wn7OzhsnarCH
 YSRNxaC7vtgBKLA9wUnFh8UUbh0FbOwXBCaq4OhHMhgRihdteVBCzlcR/6c+IRbt
 EoZxKzfQ0hI1z5f++kJNaRXMtUbSpM8D1HdKKHgiWjpdBSD0eu2X106KQT2R2ZOF
 qhX8xPLWNzdBglA6L43AaZUu+4ayd3QrrJIkjDv/K1rCHZjfGOzSQfoZgTEBNLFA
 tC0crhEfw8m98e4EwhCtekGQxdczRdLS9YvtC/h6mU2xkpA35yNSwB1/iuVQdkYD
 XyrEqImAQ1PJla7NL0hxSy5ZxrBtMeKT4WZZ0BNgKXryemldg8Tuv3AEyach3BHz
 eU0pIwpbnPm1JAPyrpDQ1yEf7QsD77gTPfEvilEci60R9DhvIMGAY+pt0qfME3yX
 wOLp2yVBEXlRmvHk/y/+r+m4aCsmwSrikbWwmLLwAAA6JehtzFOWxTEfNpACP23V
 mZyyZznsHIIE3Q==
 =ARdm
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Slightly late as I had to rebase mid-week to insert a bug fix:

   - A large series from Nick for 64-bit to further rework our exception
     vectors, and rewrite portions of the syscall entry/exit and
     interrupt return in C. The result is much easier to follow code
     that is also faster in general.

   - Cleanup of our ptrace code to split various parts out that had
     become badly intertwined with #ifdefs over the years.

   - Changes to our NUMA setup under the PowerVM hypervisor which should
     hopefully avoid non-sensical topologies which can lead to warnings
     from the workqueue code and other problems.

   - MAINTAINERS updates to remove some of our old orphan entries and
     update the status of others.

   - Quite a few other small changes and fixes all over the map.

  Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
  Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
  Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
  Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
  Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
  Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
  Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
  Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
  Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
  Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
  Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
  Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
  Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
  Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
  Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
  Datwyler, Vaibhav Jain, YueHaibing"

* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc: Make setjmp/longjmp signature standard
  powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
  powerpc: Suppress .eh_frame generation
  powerpc: Drop -fno-dwarf2-cfi-asm
  powerpc/32: drop unused ISA_DMA_THRESHOLD
  powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
  selftests/powerpc: Fix try-run when source tree is not writable
  powerpc/vmlinux.lds: Explicitly retain .gnu.hash
  powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
  powerpc/ptrace: create ppc_gethwdinfo()
  powerpc/ptrace: create ptrace_get_debugreg()
  powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
  powerpc/ptrace: move register viewing functions out of ptrace.c
  powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
  powerpc/ptrace: split out SPE related functions.
  powerpc/ptrace: split out ALTIVEC related functions.
  powerpc/ptrace: split out VSX related functions.
  powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
  powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
  powerpc/ptrace: remove unused header includes
  ...
2020-04-05 11:12:59 -07:00
Linus Walleij 8fdcca8e25 cpufreq: Select schedutil when using big.LITTLE
When we are using a system with big.LITTLE HMP
configuration, we need to use EAS to schedule the
system.

As can be seen from kernel/sched/topology.c:

 "EAS can be used on a root domain if it meets all the following conditions:
  1. an Energy Model (EM) is available;
  2. the SD_ASYM_CPUCAPACITY flag is set in the sched_domain hierarchy.
  3. no SMT is detected.
  4. the EM complexity is low enough to keep scheduling overheads low;
  5. schedutil is driving the frequency of all CPUs of the rd;"

This means that at the very least, schedutil needs to be
available as a scheduling policy for EAS to work on these
systems. Make this explicit by defaulting to the schedutil
governor if BIG_LITTLE is selected.

Currently users of the TC2 board (like me) has to figure these
dependencies out themselves and it is not helpful.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-03 11:20:06 +02:00
Linus Torvalds 3cd86a58f7 arm64 updates for 5.7:
- In-kernel Pointer Authentication support (previously only offered to
   user space).
 
 - ARM Activity Monitors (AMU) extension support allowing better CPU
   utilisation numbers for the scheduler (frequency invariance).
 
 - Memory hot-remove support for arm64.
 
 - Lots of asm annotations (SYM_*) in preparation for the in-kernel
   Branch Target Identification (BTI) support.
 
 - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU
   init callbacks, support for new DT compatibles.
 
 - IPv6 header checksum optimisation.
 
 - Fixes: SDEI (software delegated exception interface) double-lock on
   hibernate with shared events.
 
 - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm()
   converted to C, cpufeature finalisation helper.
 
 - sys_mremap() comment explaining the asymmetric address untagging
   behaviour.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl6DVyIACgkQa9axLQDI
 XvHkqRAAiZA2EYKiQL4M1DJ1cNTADjT7xKX9+UtYBXj7GMVhgVWdunpHVE6qtfgk
 cT6avmKrS/6PDqizJgr+Z1yX8x3Kvs57G4BvmIUKIw97mkdewvFQ9JKv6VA1vb86
 7Qrl1WzqsGg5Kj9uUfI4h+ZoT1H4C/9PQeFxJwgZRtF9DxRh8O7VeZI+JCu8Aub2
 lIkjI8rh+EpTsGT9h/PMGWUcawnKQloZ1/F+GfMAuYBvIv2RNN2xVreJtTmm4NyJ
 VcpL0KCNyAI2lGdaJg5nBLRDyGuXDm5i+PLsCSXMquI4fie00txXeD8sjbeuO0ks
 YTJ0EhmUUhbSE17go+SxYiEFE0v09i+lD5ud+B4Vmojp0KTczTta9VSgURlbb2/9
 n9biq5G3PPDNIrZqiTT2Tf4AMz1350nkbzL2gzKecM5aIzR/u3y5yII5CgfZtFnj
 7bGbyFpFpcqI7UaISPsNCxmknbTt/7ff0WM3+7SbecxI3AD2mnxsOdN9JTLyhDp+
 owjyiaWxl5zMWF9DhplLG/9BKpNWSxh3skazdOdELd8GTq2MbJlXrVG2XgXTAOh3
 y1s6RQrfw8zXh8TSqdmmzauComXIRWTum/sbVB3U8Z3AUsIeq/NTSbN5X9JyIbOP
 HOabhlVhhkI6omN1grqPX4jwUiZLZoNfn7Ez4q71549KVK/uBtA=
 =LJVX
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "The bulk is in-kernel pointer authentication, activity monitors and
  lots of asm symbol annotations. I also queued the sys_mremap() patch
  commenting the asymmetry in the address untagging.

  Summary:

   - In-kernel Pointer Authentication support (previously only offered
     to user space).

   - ARM Activity Monitors (AMU) extension support allowing better CPU
     utilisation numbers for the scheduler (frequency invariance).

   - Memory hot-remove support for arm64.

   - Lots of asm annotations (SYM_*) in preparation for the in-kernel
     Branch Target Identification (BTI) support.

   - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
     PMU init callbacks, support for new DT compatibles.

   - IPv6 header checksum optimisation.

   - Fixes: SDEI (software delegated exception interface) double-lock on
     hibernate with shared events.

   - Minor clean-ups and refactoring: cpu_ops accessor,
     cpu_do_switch_mm() converted to C, cpufeature finalisation helper.

   - sys_mremap() comment explaining the asymmetric address untagging
     behaviour"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
  mm/mremap: Add comment explaining the untagging behaviour of mremap()
  arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
  arm64: Introduce get_cpu_ops() helper function
  arm64: Rename cpu_read_ops() to init_cpu_ops()
  arm64: Declare ACPI parking protocol CPU operation if needed
  arm64: move kimage_vaddr to .rodata
  arm64: use mov_q instead of literal ldr
  arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
  lkdtm: arm64: test kernel pointer authentication
  arm64: compile the kernel with ptrauth return address signing
  kconfig: Add support for 'as-option'
  arm64: suspend: restore the kernel ptrauth keys
  arm64: __show_regs: strip PAC from lr in printk
  arm64: unwind: strip PAC from kernel addresses
  arm64: mask PAC bits of __builtin_return_address
  arm64: initialize ptrauth keys for kernel booting task
  arm64: initialize and switch ptrauth kernel keys
  arm64: enable ptrauth earlier
  arm64: cpufeature: handle conflicts based on capability
  arm64: cpufeature: Move cpu capability helpers inside C file
  ...
2020-03-31 10:05:01 -07:00
Linus Torvalds 642e53ead6 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle are:

   - Various NUMA scheduling updates: harmonize the load-balancer and
     NUMA placement logic to not work against each other. The intended
     result is better locality, better utilization and fewer migrations.

   - Introduce Thermal Pressure tracking and optimizations, to improve
     task placement on thermally overloaded systems.

   - Implement frequency invariant scheduler accounting on (some) x86
     CPUs. This is done by observing and sampling the 'recent' CPU
     frequency average at ~tick boundaries. The CPU provides this data
     via the APERF/MPERF MSRs. This hopefully makes our capacity
     estimates more precise and keeps tasks on the same CPU better even
     if it might seem overloaded at a lower momentary frequency. (As
     usual, turbo mode is a complication that we resolve by observing
     the maximum frequency and renormalizing to it.)

   - Add asymmetric CPU capacity wakeup scan to improve capacity
     utilization on asymmetric topologies. (big.LITTLE systems)

   - PSI fixes and optimizations.

   - RT scheduling capacity awareness fixes & improvements.

   - Optimize the CONFIG_RT_GROUP_SCHED constraints code.

   - Misc fixes, cleanups and optimizations - see the changelog for
     details"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
  threads: Update PID limit comment according to futex UAPI change
  sched/fair: Fix condition of avg_load calculation
  sched/rt: cpupri_find: Trigger a full search as fallback
  kthread: Do not preempt current task if it is going to call schedule()
  sched/fair: Improve spreading of utilization
  sched: Avoid scale real weight down to zero
  psi: Move PF_MEMSTALL out of task->flags
  MAINTAINERS: Add maintenance information for psi
  psi: Optimize switching tasks inside shared cgroups
  psi: Fix cpu.pressure for cpu.max and competing cgroups
  sched/core: Distribute tasks within affinity masks
  sched/fair: Fix enqueue_task_fair warning
  thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
  sched/rt: Remove unnecessary push for unfit tasks
  sched/rt: Allow pulling unfitting task
  sched/rt: Optimize cpupri_find() on non-heterogenous systems
  sched/rt: Re-instate old behavior in select_task_rq_rt()
  sched/rt: cpupri_find: Implement fallback mechanism for !fit case
  sched/fair: Fix reordering of enqueue/dequeue_task_fair()
  sched/fair: Fix runnable_avg for throttled cfs
  ...
2020-03-30 17:01:51 -07:00
Linus Torvalds 9b82f05f86 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "The main changes in this cycle were:

  Kernel side changes:

   - A couple of x86/cpu cleanups and changes were grandfathered in due
     to patch dependencies. These clean up the set of CPU model/family
     matching macros with a consistent namespace and C99 initializer
     style.

   - A bunch of updates to various low level PMU drivers:
       * AMD Family 19h L3 uncore PMU
       * Intel Tiger Lake uncore support
       * misc fixes to LBR TOS sampling

   - optprobe fixes

   - perf/cgroup: optimize cgroup event sched-in processing

   - misc cleanups and fixes

  Tooling side changes are to:

   - perf {annotate,expr,record,report,stat,test}

   - perl scripting

   - libapi, libperf and libtraceevent

   - vendor events on Intel and S390, ARM cs-etm

   - Intel PT updates

   - Documentation changes and updates to core facilities

   - misc cleanups, fixes and other enhancements"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
  cpufreq/intel_pstate: Fix wrong macro conversion
  x86/cpu: Cleanup the now unused CPU match macros
  hwrng: via_rng: Convert to new X86 CPU match macros
  crypto: Convert to new CPU match macros
  ASoC: Intel: Convert to new X86 CPU match macros
  powercap/intel_rapl: Convert to new X86 CPU match macros
  PCI: intel-mid: Convert to new X86 CPU match macros
  mmc: sdhci-acpi: Convert to new X86 CPU match macros
  intel_idle: Convert to new X86 CPU match macros
  extcon: axp288: Convert to new X86 CPU match macros
  thermal: Convert to new X86 CPU match macros
  hwmon: Convert to new X86 CPU match macros
  platform/x86: Convert to new CPU match macros
  EDAC: Convert to new X86 CPU match macros
  cpufreq: Convert to new X86 CPU match macros
  ACPI: Convert to new X86 CPU match macros
  x86/platform: Convert to new CPU match macros
  x86/kernel: Convert to new CPU match macros
  x86/kvm: Convert to new CPU match macros
  x86/perf/events: Convert to new CPU match macros
  ...
2020-03-30 16:40:08 -07:00
Rafael J. Wysocki 2409000a0c Merge branches 'pm-devfreq', 'powercap' and 'pm-docs'
* pm-devfreq:
  PM / devfreq: Get rid of some doc warnings
  PM / devfreq: Fix handling dev_pm_qos_remove_request result
  PM / devfreq: Fix a typo in a comment
  PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name
  PM / devfreq: Remove unneeded extern keyword
  PM / devfreq: Use constant name of userspace governor

* powercap:
  powercap: idle_inject: Replace zero-length array with flexible-array member

* pm-docs:
  docs: cpu-freq: convert cpufreq-stats.txt to ReST
  docs: cpu-freq: convert cpu-drivers.txt to ReST
  docs: cpu-freq: convert core.txt to ReST
  docs: cpu-freq: convert index.txt to ReST
  docs: cpufreq: fix a broken reference
  Documentation: cpufreq: Move legacy driver documentation
2020-03-30 14:48:31 +02:00
Rafael J. Wysocki a00ec3874e cpufreq: intel_pstate: Select schedutil as the default governor
Modify cpufreq Kconfig to select schedutil as the default governor
if the intel_pstate driver has been selected and SMP support is
enabled (because schedutil depends on SMP).

Also select schedutil as well as the performance governor from the
intel_pstate Kconfig section to ensure the equivalence of the passive
and active mode governor configuration options.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-26 20:32:49 +01:00
Rafael J. Wysocki 5ac54113dd cpufreq: intel_pstate: Simplify intel_pstate_cpu_init()
The initial policy value set by intel_pstate_cpu_init() depends on
whether or not CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is set, but
that is not necessary, because the core will set the policy to
"performance" in cpufreq_init_policy() if the default governor is
"performance" anyway.

Accordingly, change intel_pstate_cpu_init() to always set policy
to CPUFREQ_POLICY_POWERSAVE initially to provide a valid fallback
value to cpufreq_init_policy() in case the default cpufreq governor
is neither "powersave" nor "performance".

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-26 20:30:11 +01:00
Ingo Molnar 629b3df7ec Merge branch 'x86/cpu' into perf/core, to resolve conflict
Conflicts:
	arch/x86/events/intel/uncore.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-25 15:20:44 +01:00
Thomas Gleixner d97828072d cpufreq/intel_pstate: Fix wrong macro conversion
The feature flag hwp_support_ids are supposed to match on is
X86_FEATURE_HWP, not X86_FEATURE_APERFMPERF. Fix it.

 [ bp: Write commit message. ]

Fixes: b11d77fa30 ("cpufreq: Convert to new X86 CPU match macros")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200324060124.GC11705@shao2-debian
2020-03-25 13:21:55 +01:00
Pratik Rajesh Sampat d95fe371ec cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_work_fn
The patch avoids allocating cpufreq_policy on stack hence fixing frame
size overflow in 'powernv_cpufreq_work_fn'

Fixes: 227942809b ("cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling")
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200316135743.57735-1-psampat@linux.ibm.com
2020-03-25 12:09:34 +11:00
Thomas Gleixner b11d77fa30 cpufreq: Convert to new X86 CPU match macros
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.

Get rid the of most local macro wrappers for consistency. The ones which
make sense for readability are renamed to X86_MATCH*.

In the centrino driver this also removes the two extra duplicates of family
6 model 13 which have no value at all.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/87eetheu88.fsf@nanos.tec.linutronix.de
2020-03-24 21:31:27 +01:00
Thomas Gleixner ba5bade4cc x86/devicetable: Move x86 specific macro out of generic code
There is no reason that this gunk is in a generic header file. The wildcard
defines need to stay as they are required by file2alias.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131508.736205164@linutronix.de
2020-03-24 21:02:47 +01:00
Rafael J. Wysocki 4d99175ab4 Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq drivers updates for v5.7 from Viresh Kumar:

"This pull request contains:

 - update to imx cpufreq drivers to improve their support (Anson Huang,
   Christoph Niedermaier, and Peng Fan).

 - Update to qcom cpufreq to support other krait based SoCs (Ansuel
   Smith).

 - Update ti cpufreq driver to support OPP_PLUS (Lokesh Vutla).

 - Update cpufreq-dt driver to allow platfoem specific intermediate
   callbacks (Peng Fan)."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: qcom: Add support for krait based socs
  cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
  cpufreq: dt: Allow platform specific intermediate callbacks
  cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location
  cpufreq: imx6q: read OCOTP through nvmem for imx6q
  cpufreq: imx6q: fix error handling
  cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check
  cpufreq: ti-cpufreq: Add support for OPP_PLUS
  cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
2020-03-23 13:57:04 +01:00
Ansuel Smith a8811ec764 cpufreq: qcom: Add support for krait based socs
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.

The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-03-20 09:59:57 +05:30
Anson Huang 74a189ef07 cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
Improve the -EPROBE_DEFER handling logic to simplify the code.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-03-17 13:33:05 +05:30
Takashi Iwai 3c0897c180 cpufreq: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14 12:07:38 +01:00
Rafael J. Wysocki d5a2a6bb27 cpufreq: intel_pstate: Consolidate policy verification
There is still some code duplication between intel_pstate_verify_policy()
and intel_cpufreq_verify_policy(), so avoid it by moving the common
code into a separate function and calling it from both these places.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-14 11:44:56 +01:00
Oliver O'Halloran 966c08de7c cpufreq: powernv: Fix unsafe notifiers
The PowerNV cpufreq driver registers two notifiers: one to catch
throttle messages from the OCC and one to bump the CPU frequency back
to normal before a reboot. Both require the cpufreq driver to be
registered in order to function since the notifier callbacks use
various cpufreq_*() functions.

Right now we register both notifiers before we've initialised the
driver. This seems to work, but we should head off any protential
problems by registering the notifiers after the driver is initialised.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200206062622.28235-2-oohall@gmail.com
2020-03-13 21:13:11 +11:00
Oliver O'Halloran d0a72efac8 cpufreq: powernv: Fix use-after-free
The cpufreq driver has a use-after-free that we can hit if:

a) There's an OCC message pending when the notifier is registered, and
b) The cpufreq driver fails to register with the core.

When a) occurs the notifier schedules a workqueue item to handle the
message. The backing work_struct is located on chips[].throttle and
when b) happens we clean up by freeing the array. Once we get to
the (now free) queued item and the kernel crashes.

Fixes: c5e29ea7ac ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200206062622.28235-1-oohall@gmail.com
2020-03-13 21:13:11 +11:00
Peng Fan 0c868627e6 cpufreq: dt: Allow platform specific intermediate callbacks
Platforms may need to implement platform specific get_intermediate and
target_intermediate hooks.

Update cpufreq-dt driver's platform data to contain those for such
platforms.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-03-12 15:43:52 +05:30