Commit Graph

645 Commits

Author SHA1 Message Date
Adrian Bunk 28b57cddb3 [MTD] [MAPS] drivers/mtd/maps/ck804xrom.c: convert pci_module_init()
This patch converts the pci_module_init() usage to pci_register_driver().

It's currently #if 0'ed, but still not a bad idea to change it.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27 23:34:21 +01:00
Mike Rapoport 54d33c4c71 [MTD] [NAND] CM-x270 MTD driver
This patch provides MTD support for NAND flash devices on CM-x270 modules.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27 23:04:32 +01:00
David Woodhouse d1da4e50e5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/mtd/Kconfig

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27 19:16:19 +01:00
Linus Torvalds b928ed5618 Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6
* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBI: remove unused variable
  UBI: add me to MAINTAINERS
  JFFS2: add UBI support
  UBI: Unsorted Block Images
2007-04-27 10:42:35 -07:00
Knobloch, Thomas 78ab67da10 [MTD] [NAND] Wrong calculation of page number in nand_block_bad()
In case that there is no memory based bad block table available the
function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
nand_block_bad() directly. When parameter 'getchip' is set to zero,
nand_block_bad() will not right shift the offset to calculate the
correct page number.

Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27 15:13:53 +01:00
Artem Bityutskiy d468a03002 UBI: remove unused variable
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-04-27 15:11:44 +03:00
Artem B. Bityutskiy 801c135ce7 UBI: Unsorted Block Images
UBI (Latin: "where?") manages multiple logical volumes on a single
flash device, specifically supporting NAND flash devices. UBI provides
a flexible partitioning concept which still allows for wear-levelling
across the whole flash device.

In a sense, UBI may be compared to the Logical Volume Manager
(LVM). Whereas LVM maps logical sector numbers to physical HDD sector
numbers, UBI maps logical eraseblocks to physical eraseblocks.

More information may be found at
http://www.linux-mtd.infradead.org/doc/ubi.html

Partitioning/Re-partitioning

  An UBI volume occupies a certain number of erase blocks. This is
  limited by a configured maximum volume size, which could also be
  viewed as the partition size. Each individual UBI volume's size can
  be changed independently of the other UBI volumes, provided that the
  sum of all volume sizes doesn't exceed a certain limit.

  UBI supports dynamic volumes and static volumes. Static volumes are
  read-only and their contents are protected by CRC check sums.

Bad eraseblocks handling

  UBI transparently handles bad eraseblocks. When a physical
  eraseblock becomes bad, it is substituted by a good physical
  eraseblock, and the user does not even notice this.

Scrubbing

  On a NAND flash bit flips can occur on any write operation,
  sometimes also on read. If bit flips persist on the device, at first
  they can still be corrected by ECC, but once they accumulate,
  correction will become impossible. Thus it is best to actively scrub
  the affected eraseblock, by first copying it to a free eraseblock
  and then erasing the original. The UBI layer performs this type of
  scrubbing under the covers, transparently to the UBI volume users.

Erase Counts

  UBI maintains an erase count header per eraseblock. This frees
  higher-level layers (like file systems) from doing this and allows
  for centralized erase count management instead. The erase counts are
  used by the wear-levelling algorithm in the UBI layer. The algorithm
  itself is exchangeable.

Booting from NAND

  For booting directly from NAND flash the hardware must at least be
  capable of fetching and executing a small portion of the NAND
  flash. Some NAND flash controllers have this kind of support. They
  usually limit the window to a few kilobytes in erase block 0. This
  "initial program loader" (IPL) must then contain sufficient logic to
  load and execute the next boot phase.

  Due to bad eraseblocks, which may be randomly scattered over the
  flash device, it is problematic to store the "secondary program
  loader" (SPL) statically. Also, due to bit-flips it may become
  corrupted over time. UBI allows to solve this problem gracefully by
  storing the SPL in a small static UBI volume.

UBI volumes vs. static partitions

  UBI volumes are still very similar to static MTD partitions:

    * both consist of eraseblocks (logical eraseblocks in case of UBI
      volumes, and physical eraseblocks in case of static partitions;
    * both support three basic operations - read, write, erase.

  But UBI volumes have the following advantages over traditional
  static MTD partitions:

    * there are no eraseblock wear-leveling constraints in case of UBI
      volumes, so the user should not care about this;
    * there are no bit-flips and bad eraseblocks in case of UBI volumes.

  So, UBI volumes may be considered as flash devices with relaxed
  restrictions.

Where can it be found?

  Documentation, kernel code and applications can be found in the MTD
  gits.

What are the applications for?

  The applications help to create binary flash images for two purposes: pfi
  files (partial flash images) for in-system update of UBI volumes, and plain
  binary images, with or without OOB data in case of NAND, for a manufacturing
  step. Furthermore some tools are/and will be created that allow flash content
  analysis after a system has crashed..

Who did UBI?

  The original ideas, where UBI is based on, were developed by Andreas
  Arnez, Frank Haverkamp and Thomas Gleixner. Josh W. Boyer and some others
  were involved too. The implementation of the kernel layer was done by Artem
  B. Bityutskiy. The user-space applications and tools were written by Oliver
  Lohmann with contributions from Frank Haverkamp, Andreas Arnez, and Artem.
  Joern Engel contributed a patch which modifies JFFS2 so that it can be run on
  a UBI volume. Thomas Gleixner did modifications to the NAND layer. Alexander
  Schmidt made some testing work as well as core functionality improvements.

Signed-off-by: Artem B. Bityutskiy <dedekind@linutronix.de>
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
2007-04-27 14:23:33 +03:00
Stephen Rothwell ccf0dec6fc [SPARC/64] constify of_get_property return: drivers
The only unfortunate bit here is that the name field of struct map_info
is not const, so for now we put a cast on the assignment of it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:27 -07:00
Randy Dunlap 06d63cc51d [MTD] [MAPS] fix plat-ram printk format
drivers/mtd/maps/plat-ram.c:172: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-26 07:28:58 +01:00
Adrian Hunter c36c46d53b [MTD] [OneNAND] Exit loop only when column start with 0
The JFFS2 requests OOB function from column 0.
But the oobtest in nand-tests doesn't.
So we only exit loop only when column start with 0.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 11:09:37 +01:00
Kyungmin Park ad28634366 [MTD] [OneNAND] Fix access the past of the real oobfree array
Here it's not the case: all the entries are occupied by
OOB chunks. Therefore, once we get into a loop like

        for (free = this->ecclayout->oobfree; free->length; ++free) {
	}

we might end up scanning past the real oobfree array.

Probably the best way out, as the same thing might happen for common NAND
as well, is to check index against MTD_MAX_OOBFREE_ENTRIES.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 11:09:23 +01:00
Kyungmin Park c19df27ec7 [MTD] [OneNAND] Update Samsung OneNAND official URL
Update Samsung OneNAND official URL.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 11:09:06 +01:00
Christoph Hellwig 3e67fe4543 [MTD] Finish conversion mtd_blkdevs to use the kthread API
Remove waitqueue, 'exiting' flag and completion; use kthread APIs instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-22 20:48:29 +01:00
Jan Engelhardt ec98c681a5 Use menuconfig objects: MTD
Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 16:21:41 -05:00
Eric W. Biederman 99f9b2431e [MTD] mtd_blkdevs: Convert to use the kthread API
thread_run is used intead of kernel_thread, daemonize, and mucking
around blocking signals directly.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-19 16:16:46 -05:00
Shashi Rao e6be133b68 [MTD] Fix fwh_lock locking
This is on a custom board with a mapping driver access to an ST
M50LPW080 chip. This chip is probed successfully with
do_map_probe("jedec_probe",...). If I use the mtdchar interface to
perform unlock->erase->program->lock on any of the 16 eraseblocks in the
chip, the chip is left in FL_STATUS mode while the data structures
believe that the chip is in FL_READY mode. Hence, any subsequent reads
to any flash byte results in 0x80 being read.

Signed-off-by: Shashi Rao <shashi@sun.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 14:11:20 -04:00
Adrian Hunter a5ac8aeb29 [MTD] nandsim: enhance nandsim to allow arbitrary NAND size
A new module parameter has been added called 'overridesize',
which overrides the size that would be determined by the
ID bytes. 'overridesize' is specified in erase blocks and
as the exponent of a power of two e.g. 5 means a size of
32 erase blocks.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:55:55 -04:00
Adrian Hunter 57aa6b545f [MTD] nandsim: Enhance nandsim optionally to report wear information
A new module parameter 'rptwear' specifies how many erases between
reporting wear information.  Zero means never.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:55:29 -04:00
Adrian Hunter 514087e74f [MTD] nandsim: enhance nandsim to simulate flash errors
New module parameters have been added to nandsim to
simulate:

        bitflips        random bit flips
        badblocks       blocks that are initially marked bad
        weakblocks      blocks that fail to erase after a
                        small number of erase cycles
        weakpages       pages that fail to write after a
                        small number of successful writes
        gravepages      pages that fail to read after a
                        small number of successful reads

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:55:08 -04:00
Adrian Hunter 2b77a0ed54 [MTD] nandsim: add partition capability to nandsim
Enhance nandsim to be able to create more than 1 partition.
A new module parameter 'parts' may be used to specify partition
sizes.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:54:50 -04:00
Andre Renaud 4226b51037 [MTD] [NAND] Casting bug in nand_default_block_markbad
There is a slight bug in nand_default_block_markbad, where the offset is
cast to an integer, prior to being shifted. This means that on large
offsets, it is incorrectly doing a signed shift & losing bits. Fixed
this by doing the cast after the shift (as is done elsewhere in the code).

Signed-off-by: Andre Renaud <andre@bluewatersys.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:50:59 -04:00
Hans-Jürgen Koch 340ea370c2 [MTD] Driver for AT26Fxxx dataflash devices
Add support for AT26Fxxx dataflash devices. These devices have a quite different
commandset than the AT45xxx chips, which are handled by at91_dataflash.c, so a
combined driver turned out to be more ugly than useful.

Tested only on AT26F004.

Signed-off-by: Hans-Jürgen Koch <hjk@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:42:56 -04:00
Thomas Gleixner 408b483d9c [MTD] Fix length comparison in MEMREADOOB
The ops.len member is not initialized, because it is unused for this
operation. The length check needs to use ops.ooblen instead

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:40:00 -04:00
Thomas Gleixner 1cf9827b68 [MTD] [NAND] Move ancient NAND chip support into a config option
The support for obsolete ancient NAND chips adds .data size and one
of the old ids conflicts with a modern one. Make the support for
such chips depending on a config option.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 18:30:57 +01:00
Thomas Gleixner 90424de8d0 [MTD] [NAND] Use ecc.read/write_page_raw consequently
Use the functions in the ecc structure instead of the default ones,
so the override by the board driver is effective also for software ecc
code paths.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 18:28:17 +01:00
sshahrom@micron.com 8c60e5475d [MTD][NAND] Add Micron Manufacturer ID
Add Micron Manufacturer ID.

Signed-off-by: Shahrom Sharif <sshahrom@micron.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 18:27:06 +01:00
Ralf Baechle 873b6a2306 [MTD] Fix dependencies for MIPS MTD drivers
o A dependency on the processor architecture does not make sense;
   delete it.
 o The Alchemy and MTX drivers requires MTD_PARTITIONS and MTD_CFI to work,
   make those dependencies.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 18:24:51 +01:00
Ralf Baechle 19da63d1d2 [MTD] Alchemy cleanups
Delete RCS $Id string and unused debug code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 18:19:58 +01:00
Rodolfo Giometti 0ecbc81adf [MTD] [NOR] Support for auto locking flash on power up
Auto unlock sectors on resume for auto locking flash on power up.

Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-02 14:12:23 -04:00
Marc St-Jean 68aa0fa87f [MTD] PMC MSP71xx flash/rootfs mappings
Add flash and rootfs mappings for the PMC-Sierra MSP71xx devices.

This patch references some platform support files previously submitted to
the linux-mips@linux-mips.org list.

Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-02 14:10:58 -04:00
David Woodhouse 9333907084 Merge git://git.kernel.org/pub/scm/linux/kernel/git/joern/misc 2007-03-23 17:31:17 +00:00
David Woodhouse 8e5368a1e2 [MTD] [NAND] Remember timing settings for CAFÉ NAND controller.
We'll need them for suspend/resume.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-23 10:40:04 +00:00
Kyungmin Park 470bc84436 [MTD] [OneNAND] Classify the page data and oob buffer
Classify the page data and oob buffer
and it prevents the memory fragementation (writesize + oobsize)

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09 08:08:09 +00:00
Kyungmin Park 5bc399e9ef [MTD] [OneNAND] Exit the loop when transferring/filling of the oob is finished
When transferring/filling of the oob is finished in OOB_AUTO, we exit the loop

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09 08:06:39 +00:00
Adrian Hunter 81280d5879 [MTD] [OneNAND] add Nokia Copyright and a credit
add Nokia Copyright and a credit

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09 08:05:57 +00:00
Kyungmin Park e3da8067b3 [MTD] [OneNAND] Fix typo & wrong comments
Fix typo & wrong comments

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09 08:05:22 +00:00
Kyungmin Park 91014e9bfa [MTD] [OneNAND] Use oob buffer instead of main one in oob functions
In oob functions, it is used main buffer instead of oob one. So fix it.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09 08:04:25 +00:00
Adrian Hunter 74641d7527 [MTD] Correct partition failed erase address
If an erase operation fails, the address at which the
failure occurred is returned by the driver.  The MTD
partition must adjust this address (by subtracting the
partition offset) before returning to the caller.
This was not happening, which caused JFFS2 to mark
the wrong block bad!

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08 10:45:04 +00:00
Robert P. J. Day 89e2bf61da [MTD] [NAND] Correct misspelled preprocessor variable.
Replace the apparently misspelled preprocessor variable
"MTD_NAND_DISKONCHIP_BBTWRITE" with the correct form
"CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08 09:48:14 +00:00
Alan Cox 99109a6dac [MTD] [MAPS] dilnetpc: Fix printk warning
The type of a resource could be 32 or 64bit depending upon platform or
option so cast it explicitly.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08 09:46:28 +00:00
Vijay Sampath 83d480917b [MTD] [NOR] Fix oops in cfi_amdstd_sync
The files cfi_cmdset_0002.c and cfi_cmdset_0020.c do not initialize their
wait queues like is done in cfi_cmdset_0001.c.  This causes an oops when
the wait queue is accessed.  I have copied the code from cfi_cmdset_0001.c
that is pertinent to initialization of the wait queue.

Signed-off-by: Vijay Sampath <vsampath@gmail.com>
Acked-by: Joern Engel <joern@lazybastard.org>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08 09:22:38 +00:00
Cyrill Gorcunov dc164bbb4b [MTD] ESB2 check for closed ROM window
Add checking for closed ROM window on Intel ESB2 Southbridge.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08 09:21:42 +00:00
Vitaly Wool 1f92267c51 [MTD] [NAND] make oobavail public
During the MTD rework the oobavail parameter of mtd_info structure has become
private. This is not quite correct in terms of integrity and logic. If we have
means to write to OOB area, then we'd like to know upfront how many bytes out
of OOB are spare per page to be able to adapt to specific cases.
The patch inlined adds the public oobavail parameter.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08 09:17:43 +00:00
Arnaud Patard dff5e44c36 [ARM] 4233/1: nand/s3c2410.c: warning fix
Noticed while building a s3c2410 kernel :
drivers/mtd/nand/s3c2410.c: In function 's3c2440_nand_calculate_ecc':
drivers/mtd/nand/s3c2410.c:476: warning: format '%06x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'

This patch fixes it.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-25 16:41:41 +00:00
Joern Engel 21d31f1f7c [PATCH] [MTD] block2mtd: remove readahead code
Over the years there was a slow trickle of complaints against the readahead
code.  Most of them concerned performance, Peter Zijlstra stumbled over it
when working unrelated changes and I believe there was an actual bug report.
Oh, Andrew Morton also complained about duplicating code from mm/readahead.c.

It is just not worth it.  On flash media like usb sticks, readahead will
make things go slow - very slow.  On spinning disks, readahead may be a
win, but this is definitely not the place to add it.

Signed-off-by: Jörn Engel <joern@lazybastard.org>
2007-02-20 20:22:22 +01:00
Joern Engel 8870530a40 [PATCH] [MTD] block2mtd: remove warning
drivers/mtd/devices/block2mtd.c:311:9: warning: symbol 'dev' shadows an earlier one
drivers/mtd/devices/block2mtd.c:294:23: originally declared here

Signed-off-by: Jörn Engel <joern@lazybastard.org>
2007-02-20 20:21:41 +01:00
Joern Engel 0ffb74ccc0 [PATCH] [MTD] block2mtd: remove casts
Remove two casts - they were not only pointless, but outright harmful.

Spotted by Felix Fietkau <nbd@openwrt.org>

Signed-off-by: Jörn Engel <joern@lazybastard.org>
2007-02-20 20:20:58 +01:00
Linus Torvalds 4935361766 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (49 commits)
  [MTD] [NAND] S3C2412 fix hw ecc
  [MTD] [NAND] Work around false compiler warning in CAFÉ driver
  [JFFS2] printk warning fixes
  [MTD] [MAPS] ichxrom warning fix
  [MTD] [MAPS] amd76xrom warning fix
  [MTD] [MAPS] esb2rom warning fixes
  [MTD] [MAPS] ck804xrom warning fix
  [MTD] [MAPS] netsc520 warning fix
  [MTD] [MAPS] sc520cdp warning fix
  [MTD] [ONENAND] onenand_base warning fix
  [MTD] [NAND] eXcite nand flash driver
  [MTD] Improve heuristic for detecting wrong-endian RedBoot partition table
  [MTD] Fix RedBoot partition parsing regression harder.
  [MTD] [NAND] S3C2410: Hardware ECC correction code
  [JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NAND
  [MTD] Clarify OOB-operation interface comments
  [MTD] remove unused ecctype,eccsize fields from struct mtd_info
  [MTD] [NOR] Intel: remove ugly PROGREGION macros
  [MTD] [NOR] STAA: use writesize instead off eccsize to represent ECC block
  [MTD] OneNAND: Invalidate bufferRAM after erase
  ...
2007-02-19 13:34:11 -08:00
Matthieu CASTET 4f65992381 [MTD] [NAND] S3C2412 fix hw ecc
S3C2412 use differents registers than s3c2440 for hw ecc handling.

Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.fr>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-18 16:47:47 +00:00
Andrew Morton 2a7295b277 [MTD] [NAND] Work around false compiler warning in CAFÉ driver
drivers/mtd/nand/cafe.c: In function 'cafe_nand_cmdfunc':
drivers/mtd/nand/cafe.c:269: warning: 'irqs' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-18 16:45:05 +00:00