Commit Graph

627 Commits

Author SHA1 Message Date
Alex Elder 542582fce1 rbd: bio_chain_clone() cleanups
In bio_chain_clone(), at the end of the function the bi_next field
of the tail of the new bio chain is nulled.  This isn't necessary,
because if "tail" is non-null, its value will be the last bio
structure allocated at the top of the while loop in that function.
And before that structure is added to the end of the new chain, its
bi_next pointer is always made null.

While touching that function, clean a few other things:
    - define each local variable on its own line
    - move the definition of "tmp" to an inner scope
    - move the modification of gfpmask closer to where it's used
    - rearrange the logic that sets the chain's tail pointer

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01 14:30:50 -05:00
Alex Elder 84d34dcc11 rbd: kill notify_timeout option
The "notify_timeout" rbd device option is never used, so get rid of
it.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01 14:30:50 -05:00
Alex Elder cc0538b62c rbd: add read_only rbd map option
Add the ability to map an rbd image read-only, by specifying either
"read_only" or "ro" as an option on the rbd "command line."  Also
allow the inverse to be explicitly specified using "read_write" or
"rw".

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01 14:30:50 -05:00
Alex Elder f8c3892911 rbd: move rbd_opts to struct rbd_device
The rbd options don't really apply to the ceph client.  So don't
store a pointer to it in the ceph_client structure, and put them
(a struct, not a pointer) into the rbd_dev structure proper.

Pass the rbd device structure to rbd_client_create() so it can
assign rbd_dev->rbdc if successful, and have it return an error code
instead of the rbd client pointer.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01 14:30:50 -05:00
Alex Elder 621901d652 rbd: more cleanup in rbd_header_from_disk()
This just rearranges things a bit more in rbd_header_from_disk()
so that the snapshot sizes are initialized right after the buffer
to hold them is allocated and doing a little further consolidation
that follows from that.  Also adds a few simple comments.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01 14:30:50 -05:00
Alex Elder f785cc1dbe rbd: kill incore snap_names_len
The only thing the on-disk snap_names_len field is needed is to
size the buffer allocated to hold a copy of the snapshot names
for an rbd image.

So don't bother saving it in the in-core rbd_image_header structure.
Just use a local variable to hold the required buffer size while
it's needed.

Move the code that actually copies the snapshot names up closer
to where the required length is saved.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01 14:30:49 -05:00
Alex Elder 58c17b0e1b rbd: don't over-allocate space for object prefix
In rbd_header_from_disk() the object prefix buffer is sized based on
the maximum size it's block_name equivalent on disk could be.

Instead, only allocate enough to hold null-terminated string from
the on-disk header--or the maximum size of no NUL is found.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01 14:30:49 -05:00
Alex Elder 1f7ba33115 rbd: handle locking inside __rbd_client_find()
There is only caller of __rbd_client_find(), and it somewhat
clumsily gets the appropriate lock and gets a reference to the
existing ceph_client structure if it's found.

Instead, have that function handle its own locking, and acquire the
reference if found while it holds the lock.  Drop the underscores
from the name because there's no need to signify anything special
about this function.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-10-01 14:30:49 -05:00
Alex Elder 523f32582f rbd: add new snapshots at the tail
This fixes a bug that went in with this commit:

    commit f6e0c99092cca7be00fca4080cfc7081739ca544
    Author: Alex Elder <elder@inktank.com>
    Date:   Thu Aug 2 11:29:46 2012 -0500
    rbd: simplify __rbd_init_snaps_header()

The problem is that a new rbd snapshot needs to go either after an
existing snapshot entry, or at the *end* of an rbd device's snapshot
list.  As originally coded, it is placed at the beginning.  This was
based on the assumption the list would be empty (so it wouldn't
matter), but in fact if multiple new snapshots are added to an empty
list in one shot the list will be non-empty after the first one is
added.

This addresses http://tracker.newdream.net/issues/3063

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01 14:30:49 -05:00
Alex Elder 843a0d0879 rbd: rename block_name -> object_prefix
In the on-disk image header structure there is a field "block_name"
which represents what we now call the "object prefix" for an rbd
image.  Rename this field "object_prefix" to be consistent with
modern usage.

This appears to be the only remaining vestige of the use of "block"
in symbols that represent objects in the rbd code.

This addresses http://tracker.newdream.net/issues/1761

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
2012-10-01 14:30:49 -05:00
Alex Elder 4156d99840 rbd: separate reading header from decoding it
Right now rbd_read_header() both reads the header object for an rbd
image and decodes its contents.  It does this repeatedly if needed,
in order to ensure a complete and intact header is obtained.

Separate this process into two steps--reading of the raw header
data (in new function, rbd_dev_v1_header_read()) and separately
decoding its contents (in rbd_header_from_disk()).  As a result,
the latter function no longer requires its allocated_snaps argument.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01 14:30:49 -05:00
Alex Elder 103a150f0c rbd: expand rbd_dev_ondisk_valid() checks
Add checks on the validity of the snap_count and snap_names_len
field values in rbd_dev_ondisk_valid().  This eliminates the
need to do them in rbd_header_from_disk().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01 14:30:48 -05:00
Alex Elder 28cb775de1 rbd: return earlier in rbd_header_from_disk()
The only caller of rbd_header_from_disk() is rbd_read_header().
It passes as allocated_snaps the number of snapshots it will
have received from the server for the snapshot context that
rbd_header_from_disk() is to interpret.  The first time through
it provides 0--mainly to extract the number of snapshots from
the snapshot context header--so that it can allocate an
appropriately-sized buffer to receive the entire snapshot
context from the server in a second request.

rbd_header_from_disk() will not fill in the array of snapshot ids
unless the number in the snapshot matches the number the caller
had allocated.

This patch adjusts that logic a little further to be more efficient.
rbd_read_header() doesn't even examine the snapshot context unless
the snapshot count (stored in header->total_snaps) matches the
number of snapshots allocated.  So rbd_header_from_disk() doesn't
need to allocate or fill in the snapshot context field at all in
that case.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01 14:30:48 -05:00
Alex Elder 6a52325f61 rbd: rearrange rbd_header_from_disk()
This just moves code around for the most part.  It was pulled out as
a separate patch to avoid cluttering up some upcoming patches which
are more substantive.  The point is basically to group everything
related to initializing the snapshot context together.

The only functional change is that rbd_header_from_disk() now
ensures the (in-core) header it is passed is zero-filled.  This
allows a simpler error handling path in rbd_header_from_disk().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01 14:30:48 -05:00
Alex Elder d2bb24e506 rbd: use sizeof (object) instead of sizeof (type)
Fix a few spots in rbd_header_from_disk() to use sizeof (object)
rather than sizeof (type).  Use a local variable to record sizes
to shorten some lines and improve readability.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01 14:30:48 -05:00
Alex Elder d78fd7ae03 rbd: ensure invalid pointers are made null
Fix a number of spots where a pointer value that is known to
have become invalid but was not reset to null.

Also, toss in a change so we use sizeof (object) rather than
sizeof (type).

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01 14:30:48 -05:00
Alex Elder 0f1d3f9385 rbd: make snap_names_len a u64
The snap_names_len field of an rbd_image_header structure is defined
with type size_t.  That field is used as both the source and target
of 64-bit byte-order swapping operations though, so it's best to
define it with type u64 instead.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01 14:30:48 -05:00
Alex Elder 3593815022 rbd: simplify __rbd_init_snaps_header()
The purpose of __rbd_init_snaps_header() is to compare a new
snapshot context with an rbd device's list of existing snapshots.
It updates the list by adding any new snapshots or removing any
that are not present in the new snapshot context.

The code as written is a little confusing, because it traverses both
the existing snapshot list and the set of snapshots in the snapshot
context in reverse.  This was done based on an assumption about
snapshots that is not true--namely that a duplicate snapshot name
could cause an error in intepreting things if they were not
processed in ascending order.

These precautions are not necessary, because:
    - all snapshots are uniquely identified by their snapshot id
    - a new snapshot cannot be created if the rbd device has another
      snapshot with the same name
(It is furthermore not currently possible to rename a snapshot.)

This patch re-implements __rbd_init_snaps_header() so it passes
through both the existing snapshot list and the entries in the
snapshot context in forward order.  It still does the same thing
as before, but I find the logic considerably easier to understand.

By going forward through the names in the snapshot context, there
is no longer a need for the rbd_prev_snap_name() helper function.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-10-01 14:30:48 -05:00
Alex Elder 340c7a2b2c rbd: drop dev reference on error in rbd_open()
If a read-only rbd device is opened for writing in rbd_open(), it
returns without dropping the just-acquired device reference.

Fix this by moving the read-only check before getting the reference.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-09-21 20:48:54 -07:00
Alex Elder 1fe5e99321 rbd: create rbd_refresh_helper()
Create a simple helper that handles the common case of calling
__rbd_refresh_header() while holding the ctl_mutex.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:21:46 -07:00
Alex Elder b813623ab9 rbd: return obj version in __rbd_refresh_header()
Add a new parameter to __rbd_refresh_header() through which the
version of the header object is passed back to the caller.  In most
cases this isn't needed.  The main motivation is to normalize
(almost) all calls to __rbd_refresh_header() so they are all
wrapped immediately by mutex_lock()/mutex_unlock().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:21:46 -07:00
Alex Elder ccece235d3 rbd: fixes in rbd_header_from_disk()
This fixes a few issues in rbd_header_from_disk():
    - There is a check intended to catch overflow, but it's wrong in
      two ways.
	- First, the type we don't want to overflow is size_t, not
	  unsigned int, and there is now a SIZE_MAX we can use for
	  use with that type.
	- Second, we're allocating the snapshot ids and snapshot
	  image sizes separately (each has type u64; on disk they
          grouped together as a rbd_image_header_ondisk structure).
	  So we can use the size of u64 in this overflow check.
    - If there are no snapshots, then there should be no snapshot
      names.  Enforce this, and issue a warning if we encounter a
      header with no snapshots but a non-zero snap_names_len.
    - When saving the snapshot names into the header, be more direct
      in defining the offset in the on-disk structure from which
      they're being copied by using "snap_count" rather than "i"
      in the array index.
    - If an error occurs, the "snapc" and "snap_names" fields are
      freed at the end of the function.  Make those fields be null
      pointers after they're freed, to be explicit that they are
      no longer valid.
    - Finally, move the definition of the local variable "i" to the
      innermost scope in which it's needed.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:21:46 -07:00
Alex Elder 913d2fdcf6 rbd: always pass ops array to rbd_req_sync_op()
All of the callers of rbd_req_sync_op() except one pass a non-null
"ops" pointer.  The only one that does not is rbd_req_sync_read(),
which passes CEPH_OSD_OP_READ as its "opcode" and, CEPH_OSD_FLAG_READ
for "flags".

By allocating the ops array in rbd_req_sync_read() and moving the
special case code for the null ops pointer into it, it becomes
clear that much of that code is not even necessary.

In addition, the "opcode" argument to rbd_req_sync_op() is never
actually used, so get rid of that.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:21:46 -07:00
Alex Elder d67d4be56a rbd: pass null version pointer in add_snap()
rbd_header_add_snap() passes the address of a version variable to
rbd_req_sync_exec(), but it ignores the result.  Just pass a null
pointer instead.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:21:46 -07:00
Alex Elder 57cfc1060f rbd: make rbd_create_rw_ops() return a pointer
Either rbd_create_rw_ops() will succeed, or it will fail because a
memory allocation failed.  Have it just return a valid pointer or
null rather than stuffing a pointer into a provided address and
returning an errno.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:21:46 -07:00
Alex Elder 4e891e0af0 rbd: have __rbd_add_snap_dev() return a pointer
It's not obvious whether the snapshot pointer whose address is
provided to __rbd_add_snap_dev() will be assigned by that function.
Change it to return the snapshot, or a pointer-coded errno in the
event of a failure.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:21:45 -07:00
Alex Elder 070c633f60 rbd: drop "object_name" from rbd_req_sync_unwatch()
rbd_req_sync_unwatch() only ever uses rbd_dev->header_name as the
value of its "object_name" parameter, and that value is available
within the function already.  So get rid of the parameter.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:54 -07:00
Alex Elder 7f0a24d855 rbd: drop "object_name" from rbd_req_sync_notify_ack()
rbd_req_sync_notify_ack() only ever uses rbd_dev->header_name as the
value of its "object_name" parameter, and that value is available
within the function already.  So get rid of the parameter.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:53 -07:00
Alex Elder 4cb162508a rbd: drop "object_name" from rbd_req_sync_notify()
rbd_req_sync_notify() only ever uses rbd_dev->header_name as the
value of its "object_name" parameter, and that value is available
within the function already.  So get rid of the parameter.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:53 -07:00
Alex Elder 0e6f322d55 rbd: drop "object_name" from rbd_req_sync_watch()
rbd_req_sync_watch() is only called in one place, and in that place
it passes rbd_dev->header_name as the value of the "object_name"
parameter.  This value is available within the function already.

Having the extra parameter leaves the impression the object name
could take on different values, but it does not.

So get rid of the parameter.  We can always add it back again if
we find we want to watch some other object in the future.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:52 -07:00
Alex Elder 14e7085d84 rbd: drop rbd_dev parameter in snap functions
Both rbd_register_snap_dev() and __rbd_remove_snap_dev() have
rbd_dev parameters that are unused.  Remove them.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:51 -07:00
Alex Elder ed63f4fd9a rbd: drop rbd_header_from_disk() gfp_flags parameter
The function rbd_header_from_disk() is only called in one spot, and
it passes GFP_KERNEL as its value for the gfp_flags parameter.

Just drop that parameter and substitute GFP_KERNEL everywhere within
that function it had been used.  (If we find we need the parameter
again in the future it's easy enough to add back again.)

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:50 -07:00
Alex Elder 9a5d690b08 rbd: snapc is unused in rbd_req_sync_read()
The "snapc" parameter to in rbd_req_sync_read() is not used, so
get rid of it.

Reported-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:49 -07:00
Alex Elder de71a2970d rbd: rename rbd_device->id
The "id" field of an rbd device structure represents the unique
client-local device id mapped to the underlying rbd image.  Each rbd
image will have another id--the image id--and each snapshot has its
own id as well.  The simple name "id" no longer conveys the
information one might like to have.

Rename the device "id" field in struct rbd_dev to be "dev_id" to
make it a little more obvious what we're dealing with without having
to think more about context.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:49 -07:00
Alex Elder 8e94af8e2b rbd: encapsulate header validity test
If an rbd image header is read and it doesn't begin with the
expected magic information, a warning is displayed.  This is
a fairly simple test, but it could be extended at some point.
Fix the comparison so it actually looks at the "text" field
rather than the front of the structure.

In any case, encapsulate the validity test in its own function.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:48 -07:00
Alex Elder bd919d45aa rbd: clean up a few dout() calls
There was a dout() call in rbd_do_request() that was reporting
the reporting the offset as the length and vice versa.  While
fixing that I did a quick scan of other dout() calls and fixed
a couple of other minor things.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:46 -07:00
Alex Elder a059329056 rbd: simplify __rbd_remove_all_snaps()
This just replaces a while loop with list_for_each_entry_safe()
in __rbd_remove_all_snaps().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:45 -07:00
Alex Elder a66f8c97a3 rbd: drop extra header_rwsem init
In commit c666601a there was inadvertently added an extra
initialization of rbd_dev->header_rwsem.  This gets rid of the
duplicate.

Reported-by: Guangliang Zhao <gzhao@suse.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:45 -07:00
Alex Elder 9e15dc735a rbd: kill rbd_image_header->snap_seq
The snap_seq field in an rbd_image_header structure held the value
from the rbd image header when it was last refreshed.  We now
maintain this value in the snapc->seq field.  So get rid of the
other one.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:44 -07:00
Alex Elder 505cbb9bed rbd: set snapc->seq only when refreshing header
In rbd_header_add_snap() there is code to set snapc->seq to the
just-added snapshot id.  This is the only remnant left of the
use of that field for recording which snapshot an rbd_dev was
associated with.  That functionality is no longer supported,
so get rid of that final bit of code.

Doing so means we never actually set snapc->seq any more.  On the
server, the snapshot context's sequence value represents the highest
snapshot id ever issued for a particular rbd image.  So we'll make
it have that meaning here as well.  To do so, set this value
whenever the rbd header is (re-)read.  That way it will always be
consistent with the rest of the snapshot context we maintain.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:43 -07:00
Alex Elder 78dc447d3c rbd: preserve snapc->seq in rbd_header_set_snap()
In rbd_header_set_snap(), there is logic to make the snap context's
seq field get set to a particular snapshot id, or 0 if there is no
snapshot for the rbd image.

This seems to be an artifact of how the current snapshot id for an
rbd_dev was recorded before the rbd_dev->snap_id field began to be
used for that purpose.

There's no need to update the value of snapc->seq here any more, so
stop doing it.  Tidy up a few local variables in that function
while we're at it.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:42 -07:00
Alex Elder 75fe9e1981 rbd: don't use snapc->seq that way
In what appears to be an artifact of a different way of encoding
whether an rbd image maps a snapshot, __rbd_refresh_header() has
code that arranges to update the seq value in an rbd image's
snapshot context to point to the first entry in its snapshot
array if that's where it was pointing initially.

We now use rbd_dev->snap_id to record the snapshot id--using the
special value CEPH_NOSNAP to indicate the rbd_dev is not mapping a
snapshot at all.

There is therefore no need to check for this case, nor to update the
seq value, in __rbd_refresh_header().  Just preserve the seq value
that rbd_read_header() provides (which, at the moment, is nothing).

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 18:15:41 -07:00
Josh Durgin a71b891bc7 rbd: send header version when notifying
Previously the original header version was sent. Now, we update it
when the header changes.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:15:40 -07:00
Josh Durgin d1d2564654 rbd: use reference counting for the snap context
This prevents a race between requests with a given snap context and
header updates that free it. The osd client was already expecting the
snap context to be reference counted, since it get()s it in
ceph_osdc_build_request and put()s it when the request completes.

Also remove the second down_read()/up_read() on header_rwsem in
rbd_do_request, which wasn't actually preventing this race or
protecting any other data.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:15:40 -07:00
Josh Durgin 93a24e084d rbd: set image size when header is updated
The image may have been resized.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:15:39 -07:00
Josh Durgin a51aa0c042 rbd: expose the correct size of the device in sysfs
If an image was mapped to a snapshot, the size of the head version
would be shown. Protect capacity with header_rwsem, since it may
change.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:15:38 -07:00
Josh Durgin 474ef7ce83 rbd: only reset capacity when pointing to head
Snapshots cannot be resized, and the new capacity of head should not
be reflected by the snapshot.

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:15:37 -07:00
Josh Durgin e88a36ec96 rbd: return errors for mapped but deleted snapshot
When a snapshot is deleted, the OSD will return ENOENT when reading
from it. This is normally interpreted as a hole by rbd, which will
return zeroes. To minimize the time in which this can happen, stop
requests early when we are notified that our snapshot no longer
exists.

[elder@inktank.com: updated __rbd_init_snaps_header() logic]

Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-07-30 18:15:36 -07:00
Alex Elder d1f57ea663 rbd: kill num_reply parameters
Several functions include a num_reply parameter, but it is never
used.  Just get rid of it everywhere--it seems to be something
that never got fully implemented.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:09 -07:00
Alex Elder 43ae470112 rbd: option symbol renames
Use the name "ceph_opts" consistently (rather than just "opt") for
pointers to a ceph_options structure.

Change the few spots that don't use "rbd_opts" for a rbd_options
pointer to match the rest.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:08 -07:00
Alex Elder aded07ea9f rbd: more symbol renames
Rename variables named "obj" which represent object names so they're
consistently named "object_name".

Rename the "cls" and "method" parameters in rbd_req_sync_exec()
to be "class_name" and "method_name", and make similar changes
to the names of local variables in that function representing
the lengths of those names.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:07 -07:00
Alex Elder 0bed54dc9a rbd: rename some fields in struct rbd_dev
An rbd image is not a single object, but a logical construct made up
of an aggregation of objects.

Rename some fields in struct rbd_dev, in hopes of reinforcing this.
    obj         --> image_name
    obj_len     --> image_name_len
    obj_md_name --> header_name

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:06 -07:00
Alex Elder 0ce1a79413 rbd: use rbd_dev consistently
Most variables that represent a struct rbd_device are named
"rbd_dev", but in some cases "dev" is used instead.  Change all the
"dev" references so they use "rbd_dev" consistently, to make it
clear from the name that we're working with an RBD device (as
opposed to, for example, a struct device).  Similarly, change the
name of the "dev" field in struct rbd_notify_info to be "rbd_dev".

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:05 -07:00
Alex Elder 820a5f3e94 rbd: dynamically allocate snapshot name
There is no need to impose a small limit the length of the snapshot
name recorded for an rbd image in a struct rbd_dev.  Remove the
limitation by allocating space for the snapshot name dynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:04 -07:00
Alex Elder bf3e5ae112 rbd: dynamically allocate image name
There is no need to impose a small limit the length of the rbd image
name recorded in a struct rbd_dev.  Remove the limitation by
allocating space for the image name dynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:04 -07:00
Alex Elder cb8627c76d rbd: dynamically allocate image header name
There is no need to impose a small limit the length of the header
name recorded for an rbd image in a struct rbd_dev.  Remove the
limitation by allocating space for the header name dynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:03 -07:00
Alex Elder 849b4260d4 rbd: dynamically allocate object prefix
There is no need to impose a small limit the length of the object
prefix recorded for an rbd image in a struct rbd_image_header.
Remove the limitation by allocating space for the object prefix
dynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:02 -07:00
Alex Elder d22f76e703 rbd: dynamically allocate pool name
There is no need to impose a small limit the length of the pool name
recorded for an rbd image in a struct rbd_device.  Remove the
limitation by allocating space for the pool name ynamically.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:01 -07:00
Alex Elder 9bb2f334b9 rbd: create pool_id device attribute
Add an entry under /sys/bus/rbd/devices/<N>/ named "pool_id" that
provides the id for the pool the rbd image is assocatied with.  This
is in addition to the pool name already provided.

Rename the "poolid" field in struct rbd_device  to be "pool_id".

Update the documentation to reflect the addition of this new entry.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:30:00 -07:00
Alex Elder ca1e49a6af rbd: rename rbd_dev->block_name
Each rbd image has a name that forms the basis of all data objects
backing the device.  Old (format 1) images refer to this name as the
"block name," while new (format 2) images use the term "object
prefix" for this.

Change the field name in the in-core rbd image header structure to
reflect the more modern usage.  We intentionally keep the the name
"block_name" in the on-disk definition for format 1 image headers.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:29:59 -07:00
Alex Elder ea3352f4aa rbd: define dup_token()
Define a new function dup_token(), to be used during argument
parsing for making dynamically-allocated copies of tokens being
parsed.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:29:58 -07:00
Alex Elder ad4f232f28 rbd: drop a useless local variable
In rbd_req_sync_notify_ack(), a local variable was needlessly being
used to hold a null pointer.  Just pass NULL instead.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-07-30 09:29:56 -07:00
Dan Carpenter 895cfcc810 rbd: endian bug in rbd_req_cb()
Sparse complains about this because:
drivers/block/rbd.c:996:20: warning: cast to restricted __le32
drivers/block/rbd.c:996:20: warning: cast from restricted __le16

These are set in osd_req_encode_op() and they are le16.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-06 09:23:54 -05:00
Yan, Zheng f9f9a19044 rbd: Fix ceph_snap_context size calculation
ceph_snap_context->snaps is an u64 array

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-06-06 09:23:53 -05:00
Josh Durgin 263c6ca007 rbd: rename __rbd_update_snaps to __rbd_refresh_header
This function rereads the entire header and handles any changes in
it, not just changes in snapshots.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:13:09 -05:00
Josh Durgin 3591538fb2 rbd: fix snapshot size type
Snapshot sizes should be the same type as regular image sizes. This
only affects their displayed size in sysfs, not the reported size of
an actual block device sizes.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:13:03 -05:00
Josh Durgin b06e6a6be7 rbd: remove conditional snapid parameters
The snapid parameters passed to rbd_do_op() and rbd_req_sync_op()
are now always either a valid snapid or an explicit CEPH_NOSNAP.

[elder@dreamhost.com: Rephrased the description]

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:12:58 -05:00
Josh Durgin 77dfe99fe3 rbd: store snapshot id instead of index
When a device was open at a snapshot, and snapshots were deleted or
added, data from the wrong snapshot could be read. Instead of
assuming the snap context is constant, store the actual snap id when
the device is initialized, and rely on the OSDs to signal an error
if we try reading from a snapshot that was deleted.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:12:52 -05:00
Josh Durgin 403f24d3d5 rbd: protect read of snapshot sequence number
This is updated whenever a snapshot is added or deleted, and the
snapc pointer is changed with every refresh of the header.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2012-05-14 12:12:46 -05:00
Xi Wang 50f7c4c967 rbd: fix integer overflow in rbd_header_from_disk()
ondisk->snap_count is read from disk via rbd_req_sync_read() and thus
needs validation.  Otherwise, a bogus `snap_count' could overflow the
kmalloc() size, leading to memory corruption.

Also use `u32' consistently for `snap_count'.

[elder@dreamhost.com: changed to use UINT_MAX rather than ULONG_MAX]

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-05-14 12:12:41 -05:00
Dan Carpenter f8ad495a8a rbd: use gfp_flags parameter in rbd_header_from_disk()
We should use the gfp_flags that the caller specified instead of
GFP_KERNEL here.

There is only one caller and it uses GFP_KERNEL, so this change is
just a cleanup and doesn't change how the code works.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-05-14 12:12:35 -05:00
Sage Weil 3469ac1aa3 ceph: drop support for preferred_osd pgs
This was an ill-conceived feature that has been removed from Ceph.  Do
this gracefully:

 - reject attempts to specify a preferred_osd via the ioctl
 - stop exposing this information via virtual xattrs
 - always fill in -1 for requests, in case we talk to an older server
 - don't calculate preferred_osd placements/pgids

Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
2012-05-07 15:33:36 -07:00
Alex Elder cd9d9f5df6 rbd: don't hold spinlock during messenger flush
A recent change made changes to the rbd_client_list be protected by
a spinlock.  Unfortunately in rbd_put_client(), the lock is taken
before possibly dropping the last reference to an rbd_client, and on
the last reference that eventually calls flush_workqueue() which can
sleep.

The problem was flagged by a debug spinlock warning:
    BUG: spinlock wrong CPU on CPU#3, rbd/27814

The solution is to move the spinlock acquisition and release inside
rbd_client_release(), which is the spot where it's really needed for
protecting the removal of the rbd_client from the client list.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Reviewed-by: Sage Weil <sage@newdream.net>
2012-04-05 15:43:58 -05:00
Josh Durgin c666601a93 rbd: move snap_rwsem to the device, rename to header_rwsem
A new temporary header is allocated each time the header changes, but
only the changed properties are copied over. We don't need a new
semaphore for each header update.

This addresses http://tracker.newdream.net/issues/2174

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:52 -05:00
Alex Elder 32eec68d2f rbd: don't drop the rbd_id too early
Currently an rbd device's id is released when it is removed, but it
is done before the code is run to clean up sysfs-related files (such
as /sys/bus/rbd/devices/1).

It's possible that an rbd is still in use after the rbd_remove()
call has been made.  It's essentially the same as an active inode
that stays around after it has been removed--until its final close
operation.  This means that the id shows up as free for reuse at a
time it should not be.

The effect of this was seen by Jens Rehpoehler, who:
    - had a filesystem mounted on an rbd device
    - unmapped that filesystem (without unmounting)
    - found that the mount still worked properly
    - but hit a panic when he attempted to re-map a new rbd device

This re-map attempt found the previously-unmapped id available.
The subsequent attempt to reuse it was met with a panic while
attempting to (re-)install the sysfs entry for the new mapped
device.

Fix this by holding off "putting" the rbd id, until the rbd_device
release function is called--when the last reference is finally
dropped.

Note: This fixes: http://tracker.newdream.net/issues/1907

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:50 -05:00
Alex Elder 593a9e7b34 rbd: small changes
Here is another set of small code tidy-ups:
    - Define SECTOR_SHIFT and SECTOR_SIZE, and use these symbolic
      names throughout.  Tell the blk_queue system our physical
      block size, in the (unlikely) event we want to use something
      other than the default.
    - Delete the definition of struct rbd_info, which is never used.
    - Move the definition of dev_to_rbd() down in its source file,
      just above where it gets first used, and change its name to
      dev_to_rbd_dev().
    - Replace an open-coded operation in rbd_dev_release() to use
      dev_to_rbd_dev() instead.
    - Calculate the segment size for a given rbd_device just once in
      rbd_init_disk().
    - Use the '%zd' conversion specifier in rbd_snap_size_show(),
      since the value formatted is a size_t.
    - Switch to the '%llu' conversion specifier in rbd_snap_id_show().
      since the value formatted is unsigned.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:50 -05:00
Alex Elder 00f1f36ffa rbd: do some refactoring
A few blocks of code are rearranged a bit here:
    - In rbd_header_from_disk():
	- Don't bother computing snap_count until we're sure the
	  on-disk header starts with a good signature.
	- Move a few independent lines of code so they are *after* a
	  check for a failed memory allocation.
	- Get rid of unnecessary local variable "ret".
    - Make a few other changes in rbd_read_header(), similar to the
      above--just moving things around a bit while preserving the
      functionality.
    - In rbd_rq_fn(), just assign rq in the while loop's controlling
      expression rather than duplicating it before and at the end of
      the loop body.  This allows the use of "continue" rather than
      "goto next" in a number of spots.
    - Rearrange the logic in snap_by_name().  End result is the same.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:50 -05:00
Alex Elder fed4c143ba rbd: fix module sysfs setup/teardown code
Once rbd_bus_type is registered, it allows an "add" operation via
the /sys/bus/rbd/add bus attribute, and adding a new rbd device that
way establishes a connection between the device and rbd_root_dev.
But rbd_root_dev is not registered until after the rbd_bus_type
registration is complete.  This could (in principle anyway) result
in an invalid state.

Since rbd_root_dev has no tie to rbd_bus_type we can reorder these
two initializations and never be faced with this scenario.

In addition, unregister the device in the event the bus registration
fails at module init time.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:50 -05:00
Alex Elder 7ef3214af2 rbd: don't allocate mon_addrs buffer in rbd_add()
The mon_addrs buffer in rbd_add is used to hold a copy of the
monitor IP addresses supplied via /sys/bus/rbd/add.  That is
passed to rbd_get_client(), which never modifies it (nor do
any of the functions it gets passed to thereafter)--the mon_addr
parameter to rbd_get_client() is a pointer to constant data, so it
can't be modifed.  Furthermore, rbd_get_client() has the length of
the mon_addrs buffer and that is used to ensure nothing goes beyond
its end.

Based on all this, there is no reason that a buffer needs to
be used to hold a copy of the mon_addrs provided via
/sys/bus/rbd/add.   Instead, the location within that passed-in
buffer can be provided, along with the length of the "token"
therein which represents the monitor IP's.

A small change to rbd_add_parse_args() allows the address within the
buffer to be passed back, and the length is already returned.  This
now means that, at least from the perspective of this interface,
there is no such thing as a list of monitor addresses that is too
long.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:50 -05:00
Alex Elder 5214ecc45c rbd: have rbd_parse_args() report found mon_addrs size
The argument parsing routine already computes the size of the
mon_addrs buffer it extracts from the "command."  Pass it to the
caller so it can use it to provide the length to rbd_get_client().

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:49 -05:00
Alex Elder 81a8979378 rbd: do a few checks at build time
This is a bit gratuitous, but there are a few things that can be
verified at build time rather than run time, so do that.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:49 -05:00
Alex Elder e28fff268e rbd: don't use sscanf() in rbd_add_parse_args()
Make use of a few simple helper routines to parse the arguments
rather than sscanf().  This will treat both missing and too-long
arguments as invalid input (rather than silently truncating the
input in the too-long case).  In time this can also be used by
rbd_add() to use the passed-in buffer in place, rather than copying
its contents into new buffers.

It appears to me that the sscanf() previously used would not
correctly handle a supplied snapshot--the two final "%s" conversion
specifications were not separated by a space, and I'm not sure
how sscanf() handles that situation.  It may not be well-defined.
So that may be a bug this change fixes (but I didn't verify that).

The sizes of the mon_addrs and options buffers are now passed to
rbd_add_parse_args(), so they can be supplied to copy_token().

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:49 -05:00
Alex Elder a725f65e52 rbd: encapsulate argument parsing for rbd_add()
Move the code that parses the arguments provided to rbd_add() (which
are supplied via /sys/bus/rbd/add) into a separate function.

Also rename the "mon_dev_name" variable in rbd_add() to be
"mon_addrs".   The variable represents a list of one or more
comma-separated monitor IP addresses, each with an optional port
number.  I think "mon_addrs" captures that notion a little better.

Signed-off-by: Alex Elder <elder@dreamhost.com>
2012-03-22 10:47:48 -05:00
Alex Elder 27cc25943f rbd: simplify error handling in rbd_add()
If a couple pointers are initialized to NULL then a single
"out_nomem" label can be used for all of the memory allocation
failure cases in rbd_add().

Also, get rid of the "irc" local variable there.  There is no
real need for "rc" to be type ssize_t, and it can be used in
the spot "irc" was.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder 60571c7d55 rbd: reduce memory used for rbd_dev fields
The length of the string containing the monitor address
specification(s) will never exceed the length of the string passed
in to rbd_add().  The same holds true for the ceph + rbd options
string.  So reduce the amount of memory allocated for these to
that length rather than the maximum (1024 bytes).

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder d720bcb0a8 rbd: have rbd_get_client() return a rbd_client
Since rbd_get_client() currently returns an error code.  It assigns
the rbd_client field of the rbd_device structure it is passed if
successful.  Instead, have it return the created rbd_client
structure and return a pointer-coded error if there is an error.
This makes the assignment of the client pointer more obvious at the
call site.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder f0f8cef5a3 rbd: a few simple changes
Here are a few very simple cleanups:
    - Add a "RBD_" prefix to the two driver name string definitions.
    - Move the definition of struct rbd_request below struct rbd_req_coll
      to avoid the need for an empty declaration of the latter.
    - Move and group the definitions of rbd_root_dev_release() and
      rbd_root_dev, as well as rbd_bus_type and rbd_bus_attrs[],
      close to the top of the file.  Arrange the latter so
      rbd_bus_type.bus_attrs can be initialized statically.
    - Get rid of an unnecessary local variable in rbd_open().
    - Rework some hokey logic in rbd_bus_add_dev(), so the value of
      "ret" at the end is either 0 or -ENOENT to avoid the need for
      the code duplication that was there.
    - Rename a goto target in rbd_add().

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder 432b858749 rbd: rename "node_lock"
The spinlock used to protect rbd_client_list is named "node_lock".
Rename it to "rbd_client_list_lock" to make it more obvious what
it's for.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:48 -05:00
Alex Elder bc534d86be rbd: move ctl_mutex lock inside rbd_client_create()
Since rbd_client_create() is only called in one place, move the
acquisition of the mutex around that call inside that function.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder d97081b0c7 rbd: move ctl_mutex lock inside rbd_get_client()
Since rbd_get_client() is only called in one place, move the
acquisition of the mutex around that call inside that function.

Furthermore, within rbd_get_client(), it appears the mutex only
needs to be held while calling rbd_client_create().  (Moving
the lock inside that function will wait for the next patch.)

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder e6994d3dde rbd: release client list lock sooner
In rbd_get_client(), if a client is reused, a number of things
get done while still holding the list lock unnecessarily.

This just moves a few things that need no lock protection outside
the lock.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder d184f6bfde rbd: restore previous rbd id sequence behavior
It used to be that selecting a new unique identifier for an added
rbd device required searching all existing ones to find the highest
id is used.  A recent change made that unnecessary, but made it
so that id's used were monotonically non-decreasing.  It's a bit
more pleasant to have smaller rbd id's though, and this change
makes ids get allocated as they were before--each new id is one more
than the maximum currently in use.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder 499afd5b8e rbd: tie rbd_dev_list changes to rbd_id operations
The only time entries are added to or removed from the global
rbd_dev_list is exactly when a "put" or "get" operation is being
performed on a rbd_dev's id.  So just move the list management code
into get/put routines.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder e124a82f3c rbd: protect the rbd_dev_list with a spinlock
The rbd_dev_list is just a simple list of all the current
rbd_devices.  Using the ctl_mutex as a concurrency guard is
overkill.  Instead, use a spinlock for that specific purpose.

This also reduces the window that the ctl_mutex needs to be held in
rbd_add().

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder 1ddbe94eda rbd: rework calculation of new rbd id's
In order to select a new unique identifier for an added rbd device,
the list of all existing ones is searched and a value one greater
than the highest id is used.

The list search can be avoided by using an atomic variable that
keeps track of the current highest id.  Using a get/put model for
id's we can limit the boundless growth of id numbers a bit by
arranging to reuse the current highest id once it gets released.
Add these calls to "put" the id when an rbd is getting removed.

Note that this changes the pattern of device id's used--new values
will never be below the highest one seen so far (even if there
exists an unused lower one).  I assert this is OK because the key
property of an rbd id is its uniqueness, not its magnitude.

Regardless, a follow-on patch will restore the old way of doing
things, I just think this commit just makes the incremental change
to atomics a little easier to understand.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder b7f23c361b rbd: encapsulate new rbd id selection
Move the loop that finds a new unique rbd id to use into
its own helper function.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Josh Durgin cc9d734c3d rbd: use a single value of snap_name to mean no snap
There's already a constant for this anyway.

Since rbd_header_set_snap() is only used to set the rbd device
snap_name field, just do that within that function rather than
having it take the snap_name as an argument.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>

v2: Changed interface rbd_header_set_snap() so it explicitly updates
    the snap_name in the rbd_device.  Also added a BUILD_BUG_ON()
    to verify the size of the snap_name field is sufficient for
    SNAP_HEAD_NAME.
2012-03-22 10:47:47 -05:00
Alex Elder 1dbb439913 rbd: do not duplicate ceph_client pointer in rbd_device
The rbd_device structure maintains a duplicate copy of the
ceph_client pointer maintained in its rbd_client structure.  There
appears to be no good reason for this, and its presence presents a
risk of them getting out of synch or otherwise misused.  So kill it
off, and use the rbd_client copy only.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder ee57741c52 rbd: make ceph_parse_options() return a pointer
ceph_parse_options() takes the address of a pointer as an argument
and uses it to return the address of an allocated structure if
successful.  With this interface is not evident at call sites that
the pointer is always initialized.  Change the interface to return
the address instead (or a pointer-coded error code) to make the
validity of the returned pointer obvious.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:47 -05:00
Alex Elder 2107978668 rbd: a few small cleanups
Some minor cleanups in "drivers/block/rbd.c:
    - Use the more meaningful "RBD_MAX_OBJ_NAME_LEN" in place if "96"
      in the definition of RBD_MAX_MD_NAME_LEN.
    - Use DEFINE_SPINLOCK() to define and initialize node_lock.
    - Drop a needless (char *) cast in parse_rbd_opts_token().
    - Make a few minor formatting changes.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-03-22 10:47:46 -05:00
Linus Torvalds 6c073a7ee2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: fix safety of rbd_put_client()
  rbd: fix a memory leak in rbd_get_client()
  ceph: create a new session lock to avoid lock inversion
  ceph: fix length validation in parse_reply_info()
  ceph: initialize client debugfs outside of monc->mutex
  ceph: change "ceph.layout" xattr to be "ceph.file.layout"
2012-02-02 15:47:33 -08:00
Alex Elder d23a4b3fd6 rbd: fix safety of rbd_put_client()
The rbd_client structure uses a kref to arrange for cleaning up and
freeing an instance when its last reference is dropped.  The cleanup
routine is rbd_client_release(), and one of the things it does is
delete the rbd_client from rbd_client_list.  It acquires node_lock
to do so, but the way it is done is still not safe.

The problem is that when attempting to reuse an existing rbd_client,
the structure found might already be in the process of getting
destroyed and cleaned up.

Here's the scenario, with "CLIENT" representing an existing
rbd_client that's involved in the race:

 Thread on CPU A                | Thread on CPU B
 ---------------                | ---------------
 rbd_put_client(CLIENT)         | rbd_get_client()
   kref_put()                   |   (acquires node_lock)
     kref->refcount becomes 0   |   __rbd_client_find() returns CLIENT
     calls rbd_client_release() |   kref_get(&CLIENT->kref);
                                |   (releases node_lock)
       (acquires node_lock)     |
       deletes CLIENT from list | ...and starts using CLIENT...
       (releases node_lock)     |
       and frees CLIENT         | <-- but CLIENT gets freed here

Fix this by having rbd_put_client() acquire node_lock.  The result
could still be improved, but at least it avoids this problem.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-02-02 12:56:59 -08:00
Alex Elder 97bb59a03d rbd: fix a memory leak in rbd_get_client()
If an existing rbd client is found to be suitable for use in
rbd_get_client(), the rbd_options structure is not being
freed as it should.  Fix that.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-02-02 12:49:27 -08:00
Alex Elder 0e805a1d85 rbd: initialize snap_rwsem in rbd_add()
New rbd device structures get initialized in rbd_add().  Many of
the fields rely on being initially zero-filled.  However we lockdep
was noticing that the rw_semaphore embedded in the header field
was not getting properly initialized.  Fix that.

Signed-off-by: Alex Elder <elder@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2012-01-12 11:00:50 -08:00
Josh Durgin 51703306b3 rbd: remove buggy rollback functionality
This doesn't interact with resizing well, since it doesn't set the
size of the device to the size at the snapshot. It's also an expensive
operation to be synchronous. Rollback can still be done with the
userspace rbd tool.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
2011-12-07 10:46:19 -08:00
Josh Durgin 81e759fbf7 rbd: return an error when an invalid header is read
This protects against opening future rbd images that have incompatible format changes.

Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
2011-12-07 10:46:10 -08:00
Linus Torvalds 97d2eb13a0 Merge branch 'for-linus' of git://ceph.newdream.net/git/ceph-client
* 'for-linus' of git://ceph.newdream.net/git/ceph-client:
  libceph: fix double-free of page vector
  ceph: fix 32-bit ino numbers
  libceph: force resend of osd requests if we skip an osdmap
  ceph: use kernel DNS resolver
  ceph: fix ceph_monc_init memory leak
  ceph: let the set_layout ioctl set single traits
  Revert "ceph: don't truncate dirty pages in invalidate work thread"
  ceph: replace leading spaces with tabs
  libceph: warn on msg allocation failures
  libceph: don't complain on msgpool alloc failures
  libceph: always preallocate mon connection
  libceph: create messenger with client
  ceph: document ioctls
  ceph: implement (optional) max read size
  ceph: rename rsize -> rasize
  ceph: make readpages fully async
2011-10-28 16:42:18 -07:00
Sage Weil 6ab00d465a libceph: create messenger with client
This simplifies the init/shutdown paths, and makes client->msgr available
during the rest of the setup process.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-10-25 16:10:15 -07:00
Jiri Kosina e060c38434 Merge branch 'master' into for-next
Fast-forward merge with Linus to be able to merge patches
based on more recent version of the tree.
2011-09-15 15:08:18 +02:00
Justin P. Mattock 699324871f treewide: remove extra semicolons from various parts of the kernel
This is a resend from the original, changing the title from PATCH to
RFC(since this is a review for commit, and I should have put that the first go around).
and also removing some of the commit's with ia64 and bash since it is significant.
let me know if I might have missed anything etc..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-15 14:50:49 +02:00
Josh Durgin 029bcbd8b0 rbd: set blk_queue request sizes to object size
This improves performance since more requests can be merged.

Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
2011-07-26 11:29:35 -07:00
Yehuda Sadeh 79e3057c4c rbd: cancel watch request when releasing the device
We were missing this cleanup, so when a device was released
the osd didn't clean up its watchers list, so following notifications
could be slow as osd needed to timeout on the client.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-07-26 11:29:04 -07:00
Sage Weil 9db4b3e327 rbd: handle online resize of underlying rbd image
If we get a notification that the image header has changed, check for
a change in the image size.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 11:52:08 -07:00
Sage Weil aedfec59ee rbd: use snprintf for disk->disk_name
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 11:52:03 -07:00
Sage Weil 916d4d6727 rbd: cleanup: make kfree match kmalloc
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-24 11:52:01 -07:00
Sage Weil 13143d2d1c rbd: warn on update_snaps failure on notify
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-19 11:25:05 -07:00
Yehuda Sadeh 1fec70932d rbd: fix split bio handling
The rbd driver currently splits bios when they span an object boundary.
However, the blk_end_request expects the completions to roll up the results
in block device order, and the split rbd/ceph ops can complete in any
order.  This patch adds a struct rbd_req_coll to track completion of split
requests and ensures that the results are passed back up to the block layer
in order.

This fixes errors where the file system gets completion of a read operation
that spans an object boundary before the data has actually arrived.  The
bug is easily reproduced with iozone with a working set larger than
available RAM.

Reported-by: Fyodor Ustinov <ufm@ufm.su>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-13 13:52:57 -07:00
Sage Weil 11f770027b rbd: fix leak of ops struct
The ops vector must be freed by the rbd_do_request caller.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-12 20:59:14 -07:00
Sage Weil 4ad12621e4 libceph: fix ceph_osdc_alloc_request error checks
ceph_osdc_alloc_request returns NULL on failure.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-03 09:28:13 -07:00
Yehuda Sadeh 59c2be1e4d rbd: use watch/notify for changes in rbd header
Send notifications when we change the rbd header (e.g. create a snapshot)
and wait for such notifications.  This allows synchronizing the snapshot
creation between different rbd clients/rools.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-03-22 11:33:56 -07:00
Yehuda Sadeh 766fc43973 rbd: fix cleanup when trying to mount inexistent image
Previously we didn't clean up the sysfs entry that was just
created.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-01-12 15:15:18 -08:00
Yehuda Sadeh dfc5606dc5 rbd: replace the rbd sysfs interface
The new interface creates directories per mapped image
and under each it creates a subdir per available snapshot.
This allows keeping a cleaner interface within the sysfs
guidelines. The ABI documentation was updated too.

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-01 15:53:22 -08:00
Dan Carpenter 85b5aaa624 rbd: passing wrong variable to bvec_kunmap_irq()
We should be passing "buf" here insead of "bv".  This is tricky because
it's not the same as kmap() and kunmap().  GCC does warn about it if you
compile on i386 with CONFIG_HIGHMEM.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:25 -07:00
Dan Carpenter b8d0638a98 rbd: null vs ERR_PTR
ceph_alloc_page_vector() returns ERR_PTR(-ENOMEM) on errors.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:24 -07:00
Yehuda Sadeh f4cf3deef4 block: rbd: removing unnecessary test
rbd_get_segment() can't return a negative value, we don't need to check
the return output.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20 15:38:20 -07:00
Vasiliy Kulikov 28f259b7cd block: rbd: fixed may leaks
rbd_client_create() doesn't free rbdc, this leads to many leaks.

seg_len in rbd_do_op() is unsigned, so (seg_len < 0) makes no sense.
Also if fixed check fails then seg_name is leaked.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20 15:38:19 -07:00
Yehuda Sadeh 602adf4002 rbd: introduce rados block device (rbd), based on libceph
The rados block device (rbd), based on osdblk, creates a block device
that is backed by objects stored in the Ceph distributed object storage
cluster.  Each device consists of a single metadata object and data
striped over many data objects.

The rbd driver supports read-only snapshots.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:13 -07:00