Commit Graph

2027 Commits

Author SHA1 Message Date
Linus Torvalds 7b9dc3f75f Power management material for v4.10-rc1
- New cpufreq driver for Broadcom STB SoCs and a Device Tree binding
    for it (Markus Mayer).
 
  - Support for ARM Integrator/AP and Integrator/CP in the generic
    DT cpufreq driver and elimination of the old Integrator cpufreq
    driver (Linus Walleij).
 
  - Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier,
    and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie,
    Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik).
 
  - cpufreq core fix to eliminate races that may lead to using
    inactive policy objects and related cleanups (Rafael Wysocki).
 
  - cpufreq schedutil governor update to make it use SCHED_FIFO
    kernel threads (instead of regular workqueues) for doing delayed
    work (to reduce the response latency in some cases) and related
    cleanups (Viresh Kumar).
 
  - New cpufreq sysfs attribute for resetting statistics (Markus
    Mayer).
 
  - cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis,
    Viresh Kumar).
 
  - Support for using generic cpufreq governors in the intel_pstate
    driver (Rafael Wysocki).
 
  - Support for per-logical-CPU P-state limits and the EPP/EPB
    (Energy Performance Preference/Energy Performance Bias) knobs
    in the intel_pstate driver (Srinivas Pandruvada).
 
  - New CPU ID for Knights Mill in intel_pstate (Piotr Luc).
 
  - intel_pstate driver modification to use the P-state selection
    algorithm based on CPU load on platforms with the system profile
    in the ACPI tables set to "mobile" (Srinivas Pandruvada).
 
  - intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki,
    Srinivas Pandruvada).
 
  - cpufreq powernv driver updates including fast switching support
    (for the schedutil governor), fixes and cleanus (Akshay Adiga,
    Andrew Donnellan, Denis Kirjanov).
 
  - acpi-cpufreq driver rework to switch it over to the new CPU
    offline/online state machine (Sebastian Andrzej Siewior).
 
  - Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth
    Prakash).
 
  - Idle injection rework (to make it use the regular idle path
    instead of a home-grown custom one) and related powerclamp
    thermal driver updates (Peter Zijlstra, Jacob Pan, Petr Mladek,
    Sebastian Andrzej Siewior).
 
  - New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy
    Shevchenko, Piotr Luc).
 
  - intel_idle driver cleanups and switch over to using the new CPU
    offline/online state machine (Anna-Maria Gleixner, Sebastian
    Andrzej Siewior).
 
  - cpuidle DT driver update to support suspend-to-idle properly
    (Sudeep Holla).
 
  - cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian,
    Rafael Wysocki).
 
  - Preliminary support for power domains including CPUs in the
    generic power domains (genpd) framework and related DT bindings
    (Lina Iyer).
 
  - Assorted fixes and cleanups in the generic power domains (genpd)
    framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven).
 
  - Preliminary support for devices with multiple voltage regulators
    and related fixes and cleanups in the Operating Performance Points
    (OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd).
 
  - System sleep state selection interface rework to make it easier
    to support suspend-to-idle as the default system suspend method
    (Rafael Wysocki).
 
  - PM core fixes and cleanups, mostly related to the interactions
    between the system suspend and runtime PM frameworks (Ulf Hansson,
    Sahitya Tummala, Tony Lindgren).
 
  - Latency tolerance PM QoS framework imorovements (Andrew
    Lutomirski).
 
  - New Knights Mill CPU ID for the Intel RAPL power capping driver
    (Piotr Luc).
 
  - Intel RAPL power capping driver fixes, cleanups and switch over
    to using the new CPU offline/online state machine (Jacob Pan,
    Thomas Gleixner, Sebastian Andrzej Siewior).
 
  - Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc,
    rockchip-dfi devfreq drivers and the devfreq core (Axel Lin,
    Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh
    Kumar).
 
  - Fix for false-positive KASAN warnings during resume from ACPI S3
    (suspend-to-RAM) on x86 (Josh Poimboeuf).
 
  - Memory map verification during resume from hibernation on x86 to
    ensure a consistent address space layout (Chen Yu).
 
  - Wakeup sources debugging enhancement (Xing Wei).
 
  - rockchip-io AVS driver cleanup (Shawn Lin).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYTx4+AAoJEILEb/54YlRx9f8P/2SlNHUENW5qh6FtCw00oC2u
 UqJerQJ2L38UgbgxbE/0VYblma9rFABDWC1eO2xN2XdcdW5UPBKPVvNcOgNe1Clh
 gjy3RxZXVpmjfzt2kGfsTLEuGnHqwvx51hTUkeA2LwvkOal45xb8ZESmy8opCtiv
 iG4LwmPHoxdX5Za5nA9ItFKzxyO1EoyNSnBYAVwALDHxmNOfxEcRevfurASt/0M9
 brCCZJA0/sZxeL0lBdy8fNQPIBTUfCoTJG/MtmzGrObJ9wMFvEDfXrVEyZiWs/zA
 AAZ4kQL77enrIKgrLN8e0G6LzTLHoVcvn38Xjf24dKUqhd7ACBhYcnW+jK3+7EAd
 gjZ8efObQsiuyK/EDLUNw35tt96CHOqfrQCj2tIwRVvk9EekLqAGXdIndTCr2kYW
 RpefmP5kMljnm/nQFOVLwMEUQMuVkvUE7EgxADy7DoDmepBFC4ICRDWPye70R2kC
 0O1Tn2PAQq4Fd1tyI9TYYz0YQQkRoaRb5rfYUSzbRbeCdsphUopp4Vhsiyn6IcnF
 XnLbg6pRAat82MoS9n4pfO/VCo8vkErKA8tut9G7TDakkrJoEE7l31PdKW0hP3f6
 sBo6xXy6WTeivU/o/i8TbM6K4mA37pBaj78ooIkWLgg5fzRaS2+0xSPVy2H9x1m5
 LymHcobCK9rSZ1l208Fe
 =vhxI
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "Again, cpufreq gets more changes than the other parts this time (one
  new driver, one old driver less, a bunch of enhancements of the
  existing code, new CPU IDs, fixes, cleanups)

  There also are some changes in cpuidle (idle injection rework, a
  couple of new CPU IDs, online/offline rework in intel_idle, fixes and
  cleanups), in the generic power domains framework (mostly related to
  supporting power domains containing CPUs), and in the Operating
  Performance Points (OPP) library (mostly related to supporting devices
  with multiple voltage regulators)

  In addition to that, the system sleep state selection interface is
  modified to make it easier for distributions with unchanged user space
  to support suspend-to-idle as the default system suspend method, some
  issues are fixed in the PM core, the latency tolerance PM QoS
  framework is improved a bit, the Intel RAPL power capping driver is
  cleaned up and there are some fixes and cleanups in the devfreq
  subsystem

  Specifics:

   - New cpufreq driver for Broadcom STB SoCs and a Device Tree binding
     for it (Markus Mayer)

   - Support for ARM Integrator/AP and Integrator/CP in the generic DT
     cpufreq driver and elimination of the old Integrator cpufreq driver
     (Linus Walleij)

   - Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier,
     and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie,
     Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik)

   - cpufreq core fix to eliminate races that may lead to using inactive
     policy objects and related cleanups (Rafael Wysocki)

   - cpufreq schedutil governor update to make it use SCHED_FIFO kernel
     threads (instead of regular workqueues) for doing delayed work (to
     reduce the response latency in some cases) and related cleanups
     (Viresh Kumar)

   - New cpufreq sysfs attribute for resetting statistics (Markus Mayer)

   - cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis,
     Viresh Kumar)

   - Support for using generic cpufreq governors in the intel_pstate
     driver (Rafael Wysocki)

   - Support for per-logical-CPU P-state limits and the EPP/EPB (Energy
     Performance Preference/Energy Performance Bias) knobs in the
     intel_pstate driver (Srinivas Pandruvada)

   - New CPU ID for Knights Mill in intel_pstate (Piotr Luc)

   - intel_pstate driver modification to use the P-state selection
     algorithm based on CPU load on platforms with the system profile in
     the ACPI tables set to "mobile" (Srinivas Pandruvada)

   - intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki,
     Srinivas Pandruvada)

   - cpufreq powernv driver updates including fast switching support
     (for the schedutil governor), fixes and cleanus (Akshay Adiga,
     Andrew Donnellan, Denis Kirjanov)

   - acpi-cpufreq driver rework to switch it over to the new CPU
     offline/online state machine (Sebastian Andrzej Siewior)

   - Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth
     Prakash)

   - Idle injection rework (to make it use the regular idle path instead
     of a home-grown custom one) and related powerclamp thermal driver
     updates (Peter Zijlstra, Jacob Pan, Petr Mladek, Sebastian Andrzej
     Siewior)

   - New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy
     Shevchenko, Piotr Luc)

   - intel_idle driver cleanups and switch over to using the new CPU
     offline/online state machine (Anna-Maria Gleixner, Sebastian
     Andrzej Siewior)

   - cpuidle DT driver update to support suspend-to-idle properly
     (Sudeep Holla)

   - cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian,
     Rafael Wysocki)

   - Preliminary support for power domains including CPUs in the generic
     power domains (genpd) framework and related DT bindings (Lina Iyer)

   - Assorted fixes and cleanups in the generic power domains (genpd)
     framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven)

   - Preliminary support for devices with multiple voltage regulators
     and related fixes and cleanups in the Operating Performance Points
     (OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd)

   - System sleep state selection interface rework to make it easier to
     support suspend-to-idle as the default system suspend method
     (Rafael Wysocki)

   - PM core fixes and cleanups, mostly related to the interactions
     between the system suspend and runtime PM frameworks (Ulf Hansson,
     Sahitya Tummala, Tony Lindgren)

   - Latency tolerance PM QoS framework imorovements (Andrew Lutomirski)

   - New Knights Mill CPU ID for the Intel RAPL power capping driver
     (Piotr Luc)

   - Intel RAPL power capping driver fixes, cleanups and switch over to
     using the new CPU offline/online state machine (Jacob Pan, Thomas
     Gleixner, Sebastian Andrzej Siewior)

   - Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc,
     rockchip-dfi devfreq drivers and the devfreq core (Axel Lin,
     Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh Kumar)

   - Fix for false-positive KASAN warnings during resume from ACPI S3
     (suspend-to-RAM) on x86 (Josh Poimboeuf)

   - Memory map verification during resume from hibernation on x86 to
     ensure a consistent address space layout (Chen Yu)

   - Wakeup sources debugging enhancement (Xing Wei)

   - rockchip-io AVS driver cleanup (Shawn Lin)"

* tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (127 commits)
  devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locks
  devfreq: rk3399_dmc: Remove dangling rcu_read_unlock()
  devfreq: exynos: Don't use OPP structures outside of RCU locks
  Documentation: intel_pstate: Document HWP energy/performance hints
  cpufreq: intel_pstate: Support for energy performance hints with HWP
  cpufreq: intel_pstate: Add locking around HWP requests
  PM / sleep: Print active wakeup sources when blocking on wakeup_count reads
  PM / core: Fix bug in the error handling of async suspend
  PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend
  PM / Domains: Fix compatible for domain idle state
  PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators()
  PM / OPP: Allow platform specific custom set_opp() callbacks
  PM / OPP: Separate out _generic_set_opp()
  PM / OPP: Add infrastructure to manage multiple regulators
  PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage()
  PM / OPP: Manage supply's voltage/current in a separate structure
  PM / OPP: Don't use OPP structure outside of rcu protected section
  PM / OPP: Reword binding supporting multiple regulators per device
  PM / OPP: Fix incorrect cpu-supply property in binding
  cpuidle: Add a kerneldoc comment to cpuidle_use_deepest_state()
  ..
2016-12-13 10:41:53 -08:00
Rafael J. Wysocki fecc8c0ebd Merge branch 'pm-cpufreq'
* pm-cpufreq: (51 commits)
  Documentation: intel_pstate: Document HWP energy/performance hints
  cpufreq: intel_pstate: Support for energy performance hints with HWP
  cpufreq: intel_pstate: Add locking around HWP requests
  cpufreq: ondemand: Set MIN_FREQUENCY_UP_THRESHOLD to 1
  cpufreq: intel_pstate: Add Knights Mill CPUID
  MAINTAINERS: Add bug tracking system location entry for cpufreq
  cpufreq: dt: Add support for zx296718
  cpufreq: acpi-cpufreq: drop rdmsr_on_cpus() usage
  cpufreq: acpi-cpufreq: Convert to hotplug state machine
  cpufreq: intel_pstate: fix intel_pstate_exit_perf_limits() prototype
  cpufreq: intel_pstate: Set EPP/EPB to 0 in performance mode
  cpufreq: schedutil: Rectify comment in sugov_irq_work() function
  cpufreq: intel_pstate: increase precision of performance limits
  cpufreq: intel_pstate: round up min_perf limits
  cpufreq: Make cpufreq_update_policy() void
  ACPI / processor: Make acpi_processor_ppc_has_changed() void
  cpufreq: Avoid using inactive policies
  cpufreq: intel_pstate: Generic governors support
  cpufreq: intel_pstate: Request P-states control from SMM if needed
  cpufreq: dt: Add support for r8a7743 and r8a7745
  ...
2016-12-12 20:45:01 +01:00
Rafael J. Wysocki 57def856f3 Merge branch 'pm-opp'
* pm-opp:
  PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators()
  PM / OPP: Allow platform specific custom set_opp() callbacks
  PM / OPP: Separate out _generic_set_opp()
  PM / OPP: Add infrastructure to manage multiple regulators
  PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage()
  PM / OPP: Manage supply's voltage/current in a separate structure
  PM / OPP: Don't use OPP structure outside of rcu protected section
  PM / OPP: Reword binding supporting multiple regulators per device
  PM / OPP: Fix incorrect cpu-supply property in binding
  PM / OPP: Pass opp_table to dev_pm_opp_put_regulator()
  PM / OPP: fix debug/error messages in dev_pm_opp_of_get_sharing_cpus()
  PM / OPP: make _of_get_opp_desc_node() a static function
2016-12-12 20:44:01 +01:00
Srinivas Pandruvada 984edbdccc cpufreq: intel_pstate: Support for energy performance hints with HWP
It is possible to provide hints to the HWP algorithms in the processor
to be more performance centric to more energy centric. These hints are
provided by using HWP energy performance preference (EPP) or energy
performance bias (EPB) settings.

The scope of these settings is per logical processor, which means that
each of the logical processors in the package can be programmed with a
different value.

This change provides cpufreq sysfs interface to provide hint. For each
policy, two additional attributes will be available to check and provide
hint. These attributes will only be present when the intel_pstate driver
is using HWP mode.

These attributes are:
 - energy_performance_available_preferences
 - energy_performance_preference

To get list of supported hints:
$ cat energy_performance_available_preferences
default performance balance_performance balance_power power

The current preference can be read or changed via cpufreq sysfs
attribute "energy_performance_preference". Reading from this attribute
will display current effective setting changed via any method. User can
write any of the valid preference string to this attribute. User can
always restore to power-on default by writing "default".

Implementation
Since these hints can be provided by direct MSR write or using some tools
like x86_energy_perf_policy, the driver internally doesn't maintain any
state. The user operation will result in direct read/write of MSR: 0x774
(HWP_REQUEST_MSR). Also driver use read modify write to update other
fields in this MSR.

Summary of changes:
 - struct cpudata field epp_saved is renamed to epp_powersave, as this
   stores the value to restore once policy is switched from performance
   to powersave to restore original powersave EPP value.
 - A new struct cpudata field epp_saved is used to store the raw MSR
   EPP/EPB value when a CPU goes offline or on suspend and restore on
   online/resume. This ensures that EPP value is restored to correct
   value irrespective of the means used to set.
 - EPP/EPB value ranges are fixed for each preference, which can be
   set for the cpufreq sysfs, so user request is mapped to/from this
   range.
 - New attributes are only added when HWP is present.
 - Since EPP value of 0 is valid the fields are initialized to
   -EINVAL when not valid. The field epp_default is read only once
   after powerup to avoid reading on subsequent CPU online operation
 - New suspend callback to store epp on suspend operation
 - Don't invalidate old epp_saved field on resume and online as now
   we can restore last epp value on suspend and this field can still
   have old EPP value sampled during switch to performance from
   powersave.
 - While here optimized setting of cpu_data->epp_powersave = epp in
   intel_pstate_hwp_set() as this was done in both true and false
   paths.
 - epp/epb set function returns error to caller on failure to pass
   on to user space for display.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08 01:43:05 +01:00
Srinivas Pandruvada b59fe54053 cpufreq: intel_pstate: Add locking around HWP requests
To avoid race conditions from multiple threads, increase the scope
of intel_pstate_limits_lock to include HWP requests also.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08 01:43:04 +01:00
Viresh Kumar dfbe4678d7 PM / OPP: Add infrastructure to manage multiple regulators
This patch adds infrastructure to manage multiple regulators and updates
the only user (cpufreq-dt) of dev_pm_opp_set{put}_regulator().

This is preparatory work for adding full support for devices with
multiple regulators.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-06 02:27:59 +01:00
Chen Yu 4dd63b49a7 cpufreq: ondemand: Set MIN_FREQUENCY_UP_THRESHOLD to 1
Currently the minimal up_threshold is 11, and user may want to
use a smaller minimal up_threshold for performance tuning,
so MIN_FREQUENCY_UP_THRESHOLD could be set to 1 because:

1. Current systems wouldn't be affected as they have already
   a value >= 11.
2. New systems with a default kernel would keep still the default
   value that is >= 11.

Users now have the advantage that they can make their own decisions
and customize the 'trip point' to switch to the max frequency.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=65501
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 22:43:33 +01:00
Piotr Luc 58bf454272 cpufreq: intel_pstate: Add Knights Mill CPUID
Add Knights Mill (KNM) to the list of CPUIDs supported by intel_pstate.

Signed-off-by: Piotr Luc <piotr.luc@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-01 15:08:12 +01:00
Baoyou Xie ab83805667 cpufreq: dt: Add support for zx296718
Add the compatible string for supporting the generic cpufreq driver on
the ZTE's zx296718 SoC.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30 22:42:47 +01:00
Stephen Boyd 91291d9ad9 PM / OPP: Pass opp_table to dev_pm_opp_put_regulator()
Joonyoung Shim reported an interesting problem on his ARM octa-core
Odoroid-XU3 platform. During system suspend, dev_pm_opp_put_regulator()
was failing for a struct device for which dev_pm_opp_set_regulator() is
called earlier.

This happened because an earlier call to
dev_pm_opp_of_cpumask_remove_table() function (from cpufreq-dt.c file)
removed all the entries from opp_table->dev_list apart from the last CPU
device in the cpumask of CPUs sharing the OPP.

But both dev_pm_opp_set_regulator() and dev_pm_opp_put_regulator()
routines get CPU device for the first CPU in the cpumask. And so the OPP
core failed to find the OPP table for the struct device.

This patch attempts to fix this problem by returning a pointer to the
opp_table from dev_pm_opp_set_regulator() and using that as the
parameter to dev_pm_opp_put_regulator(). This ensures that the
dev_pm_opp_put_regulator() doesn't fail to find the opp table.

Note that similar design problem also exists with other
dev_pm_opp_put_*() APIs, but those aren't used currently by anyone and
so we don't need to update them for now.

Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Reported-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ Viresh: Wrote commit log and tested on exynos 5250 ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30 22:41:28 +01:00
Tim Chen de966cf4a4 sched/x86: Change CONFIG_SCHED_ITMT to CONFIG_SCHED_MC_PRIO
Rename CONFIG_SCHED_ITMT for Intel Turbo Boost Max Technology 3.0
to CONFIG_SCHED_MC_PRIO.  This makes the configuration extensible
in future to other architectures that wish to similarly establish
CPU core priorities support in the scheduler.

The description in Kconfig is updated to reflect this change with
added details for better clarity.  The configuration is explicitly
default-y, to enable the feature on CPUs that have this feature.

It has no effect on non-TBM3 CPUs.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: jolsa@redhat.com
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: rjw@rjwysocki.net
Link: http://lkml.kernel.org/r/2b2ee29d93e3f162922d72d0165a1405864fbb23.1480444902.git.tim.c.chen@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-30 08:27:08 +01:00
Sebastian Andrzej Siewior a3605c46e0 cpufreq: acpi-cpufreq: drop rdmsr_on_cpus() usage
The online / pre_down callback is invoked on the target CPU since commit
1cf4f629d9 ("cpu/hotplug: Move online calls to hotplugged cpu") which means
for the hotplug callback we can use rmdsrl() instead of rdmsr_on_cpus().

This leaves us with set_boost() as the only user which still needs to
read/write the MSR on different CPUs. There is no point in doing that
update on all cpus with the read modify write magic via per cpu data. We
simply can issue a function call on all online CPUs which also means that we
need half that many IPIs.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-28 14:31:06 +01:00
Sebastian Andrzej Siewior 4d66ddf28d cpufreq: acpi-cpufreq: Convert to hotplug state machine
Install the callbacks via the state machine.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-28 14:31:06 +01:00
Arnd Bergmann 7a3ba767f6 cpufreq: intel_pstate: fix intel_pstate_exit_perf_limits() prototype
The addition of the generic governor support marked the
intel_pstate_exit_perf_limits as inline(), which fixed a warning,
but it introduced another warning:

drivers/cpufreq/intel_pstate.c: In function ‘intel_pstate_exit_perf_limits’:
drivers/cpufreq/intel_pstate.c:483:1: error: no return statement in function returning non-void [-Werror=return-type]

This changes it back to a 'void' return type, and changes the
corresponding intel_pstate_init_acpi_perf_limits() function to
be inline as well for consistency.

Fixes: 001c76f05b (cpufreq: intel_pstate: Generic governors support)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-28 14:24:21 +01:00
Srinivas Pandruvada 8442885fca cpufreq: intel_pstate: Set EPP/EPB to 0 in performance mode
When user has selected performance policy, then set the EPP (Energy
Performance Preference) or EPB (Energy Performance Bias) to maximum
performance mode.

Also when user switch back to powersave, then restore EPP/EPB to last
EPP/EPB value before entering performance mode. If user has not changed
EPP/EPB manually then it will be power on default value.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-28 14:23:56 +01:00
Rafael J. Wysocki 17669006ad cpufreq/intel_pstate: Use CPPC to get max performance
Use the acpi cppc_lib interface to get CPPC performance limits and update
the per cpu priority for the ITMT scheduler. If the highest performance of
CPUs differs the ITMT feature is enabled.

Co-developed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: linux-pm@vger.kernel.org
Cc: peterz@infradead.org
Cc: jolsa@redhat.com
Cc: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: bp@suse.de
Link: http://lkml.kernel.org/r/0998b98943bcdec7d1ddd4ff27358da555ea8e92.1479844244.git.tim.c.chen@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-24 20:44:20 +01:00
Srinivas Pandruvada d5dd33d9de cpufreq: intel_pstate: increase precision of performance limits
Even with round up of limits->min_perf and limits->max_perf, in some
cases resultant performance is 100 MHz less than the desired.

For example when the maximum frequency is 3.50 GHz, setting
scaling_min_frequency to 2.3 GHz always results in 2.2 GHz minimum.

Currently the fixed floating point operation uses 8 bit precision for
calculating limits->min_perf and limits->max_perf. For some operations
in this driver the 14 bit precision is used. Using the 14 bit precision
also for calculating limits->min_perf and limits->max_perf, addresses
this issue.

Introduced fp_ext_toint() equivalent to fp_toint() and int_ext_tofp()
equivalent to int_tofp() with 14 bit precision.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-22 02:31:49 +01:00
Srinivas Pandruvada 46992d6b55 cpufreq: intel_pstate: round up min_perf limits
In some use cases, user wants to enforce a minimum performance limit on
CPUs. But because of simple division the resultant performance is 100 MHz
less than the desired in some cases.

For example when the maximum frequency is 3.50 GHz, setting
scaling_min_frequency to 1.6 GHz always results in 1.5 GHz minimum. With
simple round up, the frequency can be set to 1.6 GHz to minimum in this
case. This round up is already done to max_policy_pct and max_perf, so do
the same for min_policy_pct and min_perf.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-22 02:31:48 +01:00
Rafael J. Wysocki 30248feff5 cpufreq: Make cpufreq_update_policy() void
The return value of cpufreq_update_policy() is never used, so make
it void.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2016-11-21 14:35:43 +01:00
Rafael J. Wysocki 182e36af06 cpufreq: Avoid using inactive policies
There are two places in the cpufreq core in which low-level driver
callbacks may be invoked for an inactive cpufreq policy, which isn't
guaranteed to work in general.  Both are due to possible races with
CPU offline.

First, in cpufreq_get(), the policy may become inactive after
the check against policy->cpus in cpufreq_cpu_get() and before
policy->rwsem is acquired, in which case using it going forward may
not be correct.

Second, an analogous situation is possible in cpufreq_update_policy().

Avoid using inactive policies by adding policy_is_inactive() checks
to the code in the above places.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2016-11-21 14:35:42 +01:00
Rafael J. Wysocki 001c76f05b cpufreq: intel_pstate: Generic governors support
There may be reasons to use generic cpufreq governors (eg. schedutil)
on Intel platforms instead of the intel_pstate driver's internal
governor.  However, that currently can only be done by disabling
intel_pstate altogether and using the acpi-cpufreq driver instead
of it, which is subject to limitations.

First of all, acpi-cpufreq only works on systems where the _PSS
object is present in the ACPI tables for all logical CPUs.  Second,
on those systems acpi-cpufreq will only use frequencies listed by
_PSS which may be suboptimal.  In particular, by convention, the
whole turbo range is represented in _PSS as a single P-state and
the frequency assigned to it is greater by 1 MHz than the greatest
non-turbo frequency listed by _PSS.  That may confuse governors to
use turbo frequencies less frequently which may lead to suboptimal
performance.

For this reason, make it possible to use the intel_pstate driver
with generic cpufreq governors as a "normal" cpufreq driver.  That
mode is enforced by adding intel_pstate=passive to the kernel
command line and cannot be disabled at run time.  In that mode,
intel_pstate provides a cpufreq driver interface including
the ->target() and ->fast_switch() callbacks and is listed in
scaling_driver as "intel_cpufreq".

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Doug Smythies <dsmythies@telus.net>
2016-11-21 14:32:32 +01:00
Rafael J. Wysocki d0ea59e188 cpufreq: intel_pstate: Request P-states control from SMM if needed
Currently, intel_pstate is unable to control P-states on my
IvyBridge-based Acer Aspire S5, because they are controlled by SMM
on that machine by default and it is necessary to request OS control
of P-states from it via the SMI Command register exposed in the ACPI
FADT.  intel_pstate doesn't do that now, but acpi-cpufreq and other
cpufreq drivers for x86 platforms do.

Address this problem by making intel_pstate use the ACPI-defined
mechanism as well.  However, intel_pstate is not modular and it
doesn't need the module refcount tricks played by
acpi_processor_notify_smm(), so export the core of this function
to it as acpi_processor_pstate_control() and make it call that.
[The changes in processor_perflib.c related to this should not
make any functional difference for the acpi_processor_notify_smm()
users].

To be safe, only call acpi_processor_notify_smm() from intel_pstate
if ACPI _PPC support is enabled in it.

Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-11-17 22:47:47 +01:00
Geert Uytterhoeven f0da898b46 cpufreq: dt: Add support for r8a7743 and r8a7745
Add the compatible strings for supporting the generic cpufreq driver on
the Renesas RZ/G1M (r8a7743) and RZ/G1E (r8a7745) SoCs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-16 23:31:52 +01:00
Denis Kirjanov 8a10c06a20 cpufreq: powernv: Disable preemption while checking CPU throttling state
With preemption turned on we can read incorrect throttling state
while being switched to CPU on a different chip.

 BUG: using smp_processor_id() in preemptible [00000000] code: cat/7343
 caller is .powernv_cpufreq_throttle_check+0x2c/0x710
 CPU: 13 PID: 7343 Comm: cat Not tainted 4.8.0-rc5-dirty #1
 Call Trace:
 [c0000007d25b75b0] [c000000000971378] .dump_stack+0xe4/0x150 (unreliable)
 [c0000007d25b7640] [c0000000005162e4] .check_preemption_disabled+0x134/0x150
 [c0000007d25b76e0] [c0000000007b63ac] .powernv_cpufreq_throttle_check+0x2c/0x710
 [c0000007d25b7790] [c0000000007b6d18] .powernv_cpufreq_target_index+0x288/0x360
 [c0000007d25b7870] [c0000000007acee4] .__cpufreq_driver_target+0x394/0x8c0
 [c0000007d25b7920] [c0000000007b22ac] .cpufreq_set+0x7c/0xd0
 [c0000007d25b79b0] [c0000000007adf50] .store_scaling_setspeed+0x80/0xc0
 [c0000007d25b7a40] [c0000000007ae270] .store+0xa0/0x100
 [c0000007d25b7ae0] [c0000000003566e8] .sysfs_kf_write+0x88/0xb0
 [c0000007d25b7b70] [c0000000003553b8] .kernfs_fop_write+0x178/0x260
 [c0000007d25b7c10] [c0000000002ac3cc] .__vfs_write+0x3c/0x1c0
 [c0000007d25b7cf0] [c0000000002ad584] .vfs_write+0xc4/0x230
 [c0000007d25b7d90] [c0000000002aeef8] .SyS_write+0x58/0x100
 [c0000007d25b7e30] [c00000000000bfec] system_call+0x38/0xfc

Fixes: 09a972d162 (cpufreq: powernv: Report cpu frequency throttling)
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-16 23:29:59 +01:00
Stratos Karafotis 42d951c851 cpufreq: conservative: Fix comment explaining frequency updates
The original comment about the frequency increase to maximum is wrong.

Both increase and decrease happen at steps.

Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-16 23:15:56 +01:00
Stratos Karafotis 00bfe05889 cpufreq: conservative: Decrease frequency faster for deferred updates
Conservative governor changes the CPU frequency in steps.
That means that if a CPU runs at max frequency, it will need several
sampling periods to return to min frequency when the workload
is finished.

If the update function that calculates the load and target frequency
is deferred, the governor might need even more time to decrease the
frequency.

This may have impact to power consumption and after all conservative
should decrease the frequency if there is no workload at every sampling
rate.

To resolve the above issue calculate the number of sampling periods
that the update is deferred. Considering that for each sampling period
conservative should drop the frequency by a freq_step because the
CPU was idle apply the proper subtraction to requested frequency.

Below, the kernel trace with and without this patch. First an
intensive workload is applied on a specific CPU. Then the workload
is removed and the CPU goes to idle.

WITHOUT

     <idle>-0     [007] dN..   620.329153: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   620.350857: cpu_frequency: state=1700000 cpu_id=7
kworker/7:2-556   [007] ....   620.370856: cpu_frequency: state=1900000 cpu_id=7
kworker/7:2-556   [007] ....   620.390854: cpu_frequency: state=2100000 cpu_id=7
kworker/7:2-556   [007] ....   620.411853: cpu_frequency: state=2200000 cpu_id=7
kworker/7:2-556   [007] ....   620.432854: cpu_frequency: state=2400000 cpu_id=7
kworker/7:2-556   [007] ....   620.453854: cpu_frequency: state=2600000 cpu_id=7
kworker/7:2-556   [007] ....   620.494856: cpu_frequency: state=2900000 cpu_id=7
kworker/7:2-556   [007] ....   620.515856: cpu_frequency: state=3100000 cpu_id=7
kworker/7:2-556   [007] ....   620.536858: cpu_frequency: state=3300000 cpu_id=7
kworker/7:2-556   [007] ....   620.557857: cpu_frequency: state=3401000 cpu_id=7
     <idle>-0     [007] d...   669.591363: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   669.591939: cpu_idle: state=4294967295 cpu_id=7
     <idle>-0     [007] d...   669.591980: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] dN..   669.591989: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...   670.201224: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   670.221975: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   670.222016: cpu_frequency: state=3300000 cpu_id=7
     <idle>-0     [007] d...   670.222026: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   670.234964: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...   670.801251: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   671.236046: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   671.236073: cpu_frequency: state=3100000 cpu_id=7
     <idle>-0     [007] d...   671.236112: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   671.393437: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...   671.401277: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   671.404083: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   671.404111: cpu_frequency: state=2900000 cpu_id=7
     <idle>-0     [007] d...   671.404125: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   671.404974: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...   671.501180: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   671.995414: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   671.995459: cpu_frequency: state=2800000 cpu_id=7
     <idle>-0     [007] d...   671.995469: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   671.996287: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...   672.001305: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   672.078374: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   672.078410: cpu_frequency: state=2600000 cpu_id=7
     <idle>-0     [007] d...   672.078419: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   672.158020: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   672.158040: cpu_frequency: state=2400000 cpu_id=7
     <idle>-0     [007] d...   672.158044: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   672.160038: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...   672.234557: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   672.237121: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   672.237174: cpu_frequency: state=2100000 cpu_id=7
     <idle>-0     [007] d...   672.237186: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   672.237778: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...   672.267902: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   672.269860: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   672.269906: cpu_frequency: state=1900000 cpu_id=7
     <idle>-0     [007] d...   672.269914: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   672.271902: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...   672.751342: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...   672.823056: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-556   [007] ....   672.823095: cpu_frequency: state=1600000 cpu_id=7

WITH

     <idle>-0     [007] dN..  4380.928009: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-399   [007] ....  4380.949767: cpu_frequency: state=2000000 cpu_id=7
kworker/7:2-399   [007] ....  4380.969765: cpu_frequency: state=2200000 cpu_id=7
kworker/7:2-399   [007] ....  4381.009766: cpu_frequency: state=2500000 cpu_id=7
kworker/7:2-399   [007] ....  4381.029767: cpu_frequency: state=2600000 cpu_id=7
kworker/7:2-399   [007] ....  4381.049769: cpu_frequency: state=2800000 cpu_id=7
kworker/7:2-399   [007] ....  4381.069769: cpu_frequency: state=3000000 cpu_id=7
kworker/7:2-399   [007] ....  4381.089771: cpu_frequency: state=3100000 cpu_id=7
kworker/7:2-399   [007] ....  4381.109772: cpu_frequency: state=3400000 cpu_id=7
kworker/7:2-399   [007] ....  4381.129773: cpu_frequency: state=3401000 cpu_id=7
     <idle>-0     [007] d...  4428.226159: cpu_idle: state=1 cpu_id=7
     <idle>-0     [007] d...  4428.226176: cpu_idle: state=4294967295 cpu_id=7
     <idle>-0     [007] d...  4428.226181: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...  4428.227177: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...  4428.551640: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...  4428.649239: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-399   [007] ....  4428.649268: cpu_frequency: state=2800000 cpu_id=7
     <idle>-0     [007] d...  4428.649278: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...  4428.689856: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...  4428.799542: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...  4428.801683: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-399   [007] ....  4428.801748: cpu_frequency: state=1700000 cpu_id=7
     <idle>-0     [007] d...  4428.801761: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...  4428.806545: cpu_idle: state=4294967295 cpu_id=7
...
     <idle>-0     [007] d...  4429.051880: cpu_idle: state=4 cpu_id=7
     <idle>-0     [007] d...  4429.086240: cpu_idle: state=4294967295 cpu_id=7
kworker/7:2-399   [007] ....  4429.086293: cpu_frequency: state=1600000 cpu_id=7

Without the patch the CPU dropped to min frequency after 3.2s
With the patch applied the CPU dropped to min frequency after 0.86s

Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-16 23:15:56 +01:00
Viresh Kumar d5f905a93c cpufreq: conservative: Rename get_freq_target() to get_freq_step()
What's returned from this function is the delta by which the frequency
must be increased or decreased and not the final frequency that should
be selected.

Name it properly to match its purpose. Also update the variables used to
store that value.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14 21:34:52 +01:00
Akshay Adiga c9a81e6864 cpufreq: powernv: Fix uninitialized lpstate_idx in gpstates_timer_handler()
lpstate_idx remains uninitialized in the case when elapsed_time
is greater than MAX_RAMP_DOWN_TIME.  At the end of rampdown the
global pstate should be equal to the local pstate.

Fixes: 20b15b7663 (cpufreq: powernv: Use PMCR to verify global and localpstate)
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14 21:32:31 +01:00
Srinivas Pandruvada 7f7a516ee3 cpufreq: intel_pstate: Use CPU load based algorithm for PM_MOBILE
Use get_target_pstate_use_cpu_load() to calculate target P-State for
devices, with the preferred power management profile in ACPI FADT
set to PM_MOBILE.

This may help in resolving some thermal issues caused by low sustained
cpu bound workloads. The current algorithm tend to over provision in this
case as it doesn't look at the CPU busyness.

Also included the fix from Arnd Bergmann <arnd@arndb.de> to solve compile
issue, when CONFIG_ACPI is not defined.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14 21:25:23 +01:00
Robert Jarzmik dcd2ea410d cpufreq: pxa: use generic platdev driver for device-tree
For device-tree based pxa25x and pxa27x platforms, cpufreq-dt driver is
doing the job as well as pxa2xx-cpufreq, so add these platforms to the
compatibility list.

This won't work for legacy non device-tree platforms where
pxa2xx-cpufreq is still required.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11 02:08:42 +01:00
Markus Mayer ee7930ee27 cpufreq: stats: New sysfs attribute for clearing statistics
Allow CPUfreq statistics to be cleared by writing anything to
/sys/.../cpufreq/stats/reset.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11 01:51:11 +01:00
Viresh Kumar 26f0dbc9ab cpufreq: governor: Don't use 'timer' keyword
The earlier implementation of governors used background timers and so
functions, mutex, etc had 'timer' keyword in their names.

But that's not true anymore. Replace 'timer' with 'update', as those
functions, variables are based around updates to frequency.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11 01:48:33 +01:00
Akshay Adiga 20b15b7663 cpufreq: powernv: Use PMCR to verify global and local pstate
As fast_switch() may get called with interrupt disable mode, we cannot
hold a mutex to update the global_pstate_info. So currently, fast_switch()
does not update the global_pstate_info and it will end up with stale data
whenever pstate is updated through fast_switch().

As the gpstate_timer can fire after fast_switch() has updated the pstates,
the timer handler cannot rely on the cached values of local and global
pstate and needs to read it from the PMCR.

Only gpstate_timer_handler() is affected by the stale cached pstate data
beacause either fast_switch() or target_index() routines will be called
for a given govenor, but gpstate_timer can fire after the governor has
changed to schedutil.

Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11 01:41:02 +01:00
Akshay Adiga 60c9efb8f7 cpufreq: powernv: Adding fast_switch for schedutil
Adding fast_switch which does light weight operation to set the desired
pstate. Both global and local pstates are set to the same desired pstate.

Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11 01:41:02 +01:00
Wei Yongjun e7d040b8a2 cpufreq: brcmstb-avs-cpufreq: make symbol brcm_avs_cpufreq_attr static
Fixes the following sparse warning:

drivers/cpufreq/brcmstb-avs-cpufreq.c:982:18: warning:
 symbol 'brcm_avs_cpufreq_attr' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-11 01:32:53 +01:00
Srinivas Pandruvada a410c03d66 cpufreq: intel_pstate: protect limits variable
The limits variable gets modified from intel_pstate sysfs and also gets
modified from cpufreq sysfs. So protect with a mutex to keep data
integrity, when they are getting modified from multiple threads.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01 06:10:54 +01:00
Markus Mayer 33de45c133 cpufreq: brcmstb-avs-cpufreq: add debugfs support
In order to aid debugging, we add a debugfs interface to the driver
that allows direct interaction with the AVS co-processor.

The debugfs interface provides a means for reading all and writing some
of the mailbox registers directly from the shell prompt and enables a
user to execute the communications protocol between ARM CPU and AVS CPU
step-by-step.

This interface should be used for debugging purposes only.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01 06:07:38 +01:00
Markus Mayer de322e0859 cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs
This driver supports voltage and frequency scaling on Broadcom STB SoCs
using AVS firmware with DFS and DVFS support.

Actual frequency or voltage scaling is done exclusively by the AVS
firmware. The driver merely provides a standard CPUfreq interface to
other kernel components and userland, and instructs the AVS firmware to
perform frequency or voltage changes on its behalf.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01 06:07:37 +01:00
Masahiro Yamada 1758b3374b cpufreq: dt: add Socionext UniPhier SoCs support
Add compatible strings for Pro5, PXs2, LD6b, LD11, LD20 SoCs to use
the generic cpufreq driver.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01 06:05:42 +01:00
Srinivas Pandruvada 5879f87739 cpufreq: intel_pstate: Reduce impact due to rounding error
When policy->max and policy->min are same, in some cases they don't
result in the same frequency cap. The max_policy_pct is rounded up but
not min_perf_pct. So even when they are same, results in different
percentage or maximum and minimum.
Since minimum is a conservative value for power, a lower value without
rounding is better in most of the cases, unless user wants
policy->max = policy->min.
This change uses use the same policy percentage when policy->max and
policy->min are same.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01 06:04:06 +01:00
Srinivas Pandruvada eae48f046f cpufreq: intel_pstate: Per CPU P-State limits
Intel P-State offers two interface to set performance limits:
- Intel P-State sysfs
	/sys/devices/system/cpu/intel_pstate/max_perf_pct
	/sys/devices/system/cpu/intel_pstate/min_perf_pct
- cpufreq
	/sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq
	/sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq

In the current implementation both of the above methods, change limits
to every CPU in the system. Moreover the limits placed using cpufreq
policy interface also presented in the Intel P-State sysfs via modified
max_perf_pct and min_per_pct during sysfs reads. This allows to check
percent of reduced/increased performance, irrespective of method used to
limit.

There are some new generations of processors, where it is possible to
have limits placed on individual CPU cores. Using cpufreq interface it
is possible to set limits on each CPU. But the current processing will
use last limits placed on all CPUs. So the per core limit feature of
CPUs can't be used.

This change brings in capability to set P-States limits for each CPU,
with some limitations. In this case what should be the read of
max_perf_pct and min_perf_pct? It can be most restrictive limits placed
on any CPU or max possible performance on any given CPU on which no
limits are placed. In either case someone will have issue.

So the consensus is, we can't have both sysfs controls present when user
wants to use limit per core limits.
- By default per-core-control feature is not enabled. So no one will
notice any difference.
- The way to enable is by kernel command line
intel_pstate=per_cpu_perf_limits
- When the per-core-controls are enabled there is no display of for both
read and write on
	/sys/devices/system/cpu/intel_pstate/max_perf_pct
	/sys/devices/system/cpu/intel_pstate/min_perf_pct
- User can change limits using
	/sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq
	/sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq
	/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
- User can still observe turbo percent and number of P-States from
	/sys/devices/system/cpu/intel_pstate/turbo_pct
	/sys/devices/system/cpu/intel_pstate/num_pstates
- User can read write system wide turbo status
	/sys/devices/system/cpu/no_turbo

While changing this BUG_ON is changed to WARN_ON, as they are not fatal
errors for the system.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01 06:04:06 +01:00
Linus Walleij ae8b8d8f86 cpufreq: retire the Integrator cpufreq driver
After switching the core module clocks controlling the Integrator
clock frequencies to the common clock framework, defining the
operating points in the device tree, and activating the generic
DT-based CPUfreq driver, we can retire the old Integrator
cpufreq driver.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01 06:01:18 +01:00
Linus Walleij 650ec6cfe3 cpufreq: enable the DT cpufreq driver on the Integrators
This enables the generic DT and OPP-based cpufreq driver on the
ARM Integrator/AP and Integrator/CP.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-01 06:01:18 +01:00
Rafael J. Wysocki fe0f59c412 Merge back earlier cpufreq material for v4.10. 2016-10-30 06:12:50 +01:00
Rafael J. Wysocki 8b2ada27dc Merge branches 'pm-cpufreq-fixes' and 'pm-sleep-fixes'
* pm-cpufreq-fixes:
  cpufreq: intel_pstate: Always set max P-state in performance mode
  cpufreq: intel_pstate: Set P-state upfront in performance mode

* pm-sleep-fixes:
  PM / suspend: Fix missing KERN_CONT for suspend message
2016-10-29 01:29:17 +02:00
Rafael J. Wysocki 2f1d407ada cpufreq: intel_pstate: Always set max P-state in performance mode
The only times at which intel_pstate checks the policy set for
a given CPU is the initialization of that CPU and updates of its
policy settings from cpufreq when intel_pstate_set_policy() is
invoked.

That is insufficient, however, because intel_pstate uses the same
P-state selection function for all CPUs regardless of the policy
setting for each of them and the P-state limits are shared between
them.  Thus if the policy is set to "performance" for a particular
CPU, it may not behave as expected if the cpufreq settings are
changed subsequently for another CPU.

That can be easily demonstrated by writing "performance" to
scaling_governor for all CPUs and then switching it to "powersave"
for one of them in which case all of the CPUs will behave as though
their scaling_governor were all "powersave" (even though the policy
still appears to be "performance" for the remaining CPUs).

Fix this problem by modifying intel_pstate_adjust_busy_pstate() to
always set the P-state to the maximum allowed by the current limits
for all CPUs whose policy is set to "performance".

Note that it still is recommended to always change the policy setting
in the same way for all CPUs even with this fix applied to avoid
confusion.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24 23:20:25 +02:00
Rafael J. Wysocki a6c6ead141 cpufreq: intel_pstate: Set P-state upfront in performance mode
After commit a4675fbc4a (cpufreq: intel_pstate: Replace timers with
utilization update callbacks) the cpufreq governor callbacks may not
be invoked on NOHZ_FULL CPUs and, in particular, switching to the
"performance" policy via sysfs may not have any effect on them.  That
is a problem, because it usually is desirable to squeeze the last
bit of performance out of those CPUs, so work around it by setting
the maximum P-state (within the limits) in intel_pstate_set_policy()
upfront when the policy is CPUFREQ_POLICY_PERFORMANCE.

Fixes: a4675fbc4a (cpufreq: intel_pstate: Replace timers with utilization update callbacks)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-10-21 22:18:22 +02:00
Srinivas Pandruvada 185d82456e cpufreq: intel_pstate: Remove PID debugfs when not used
When target state is calculated using get_target_pstate_use_cpu_load(),
PID controller is not used, hence it has no effect on performance.
So don't present debugfs entries to tune PID controller.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 22:16:26 +02:00
Rafael J. Wysocki 1d29815ef2 cpufreq: intel_pstate: Drop boost_iowait flag
The "IOwait boosting" mechanism is only used by the
get_target_pstate_use_cpu_load() governor function and the
boost_iowait flag in pid_params is always set when that function
is in use (and it is never set otherwise).  This means that the
boost_iowait flag is in fact redundant and may be dropped.

For this reason, replace the boost_iowait flag check in
intel_pstate_update_util() with an equivalent check against
pstate_funcs.get_target_pstate and drop that flag.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2016-10-21 22:13:51 +02:00
Prakash, Prashanth 974f86498e cpufreq / CPPC: Add MODULE_DEVICE_TABLE for cppc_cpufreq driver
MODULE_DEVICE_TABLE is added so that CPPC cpufreq module can be
automatically loaded when we have a acpi processor device with
"ACPI0007" hid.

Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-21 15:11:23 +02:00