Commit Graph

8 Commits

Author SHA1 Message Date
Matthew Wilcox 98acfc7e8e [SCSI] Add Brownie to blacklist
This device spews total rubbish to a REPORT LUNS command, so avoid
sending it one.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02 22:44:06 -06:00
James Bottomley 7f23e146a1 [SCSI] correct some dropped const compiler warnings
Make the vendor, model and rev fields in scsi_device pointers to const
and update a few prototypes of functions using them.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13 18:12:05 -07:00
Karl Magnus Kolstoe f4fd20bf31 [SCSI] 2.6.13.3; add Pioneer DRM-624x to drivers/scsi/scsi_devinfo.c
The patch below should make the Pioneer DRM-624X automatically
be set up with all 6 "drives". (6 slot SCSI CD changer)

Signed-off-by: Karl Magnus Kolstø <karl.kolsto@uib.no>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-17 12:24:04 -04:00
James Bottomley 1c5363153d [SCSI] blacklist REPORT LUNS usage on transtec arrays
They report being SCSI-3 but seem to give back rubbish to a
REPORT_LUNS command.  Force them to be sequentially scanned.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-13 09:52:19 -05:00
Anton Blanchard 4869040512 [SCSI] Universal Xport no attach blacklist
On Fri, Dec 13, 2002 at 12:24:39AM +1100, Anton Blanchard wrote:

> We tested 2.5.51 on a ppc64 box, qlogic 2312 and a fastt700 array. I
> had CONFIG_SCSI_REPORT_LUNS and unfortunately it thought the management
> LUN was a disk:
>
>   Vendor: IBM       Model: Universal Xport   Rev: 0520
>   Type:   Direct-Access                      ANSI SCSI revision: 03
>
> ...
>
> SCSI device sdaj: drive cache: write through
> SCSI device sdaj: 40960 512-byte hdwr sectors (21 MB)
>  sdaj: unknown partition table
> Attached scsi disk sdaj at scsi2, channel 0, id 0, lun 31
>
> ...
>
> end_request: I/O error, dev sdaj, sector 0

Three years later...

It looks like SGI use the same FC vendor and they already have a
workaround for this issue. The following patch adds the IBM version of
it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:23:43 -05:00
James Bottomley 507caac75e [SCSI] Make the HSG80 a REPORTLUN2 device
From: 	Steve Wilcox <spwilcox@att.com>

In order to properly report LUN's > 7, the DEC HSG80 definition in
scsi_devinfo.c needs to include BLIST_REPORTLUN2 rather than
BLIST_SPARSELUN.  I've tested this change with several HSG firmware
revisions and with both Emulex and Qlogic HBA's.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 11:40:50 -05:00
Dave Jones 0d7323c865 [SCSI] blacklist addition.
When run on a kernel that scans all LUNs, a certain crappy
scsi scanner reports the same LUN over and over..
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=155457

Aparently they were so shamed by this, they chose to remain
anonymous. Though it seems the blacklist code handles
anonymous vendors just fine.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08 18:08:45 -05:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00