Commit Graph

6683 Commits

Author SHA1 Message Date
Rafael J. Wysocki 3487972d7f PM / sleep: Avoid excess pm_runtime_enable() calls in device_resume()
Middle-layer code doing suspend-time optimizations for devices with
the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and
the ACPI PM domain) needs to make the core skip ->thaw_early and
->thaw callbacks for those devices in some cases and it sets the
power.direct_complete flag for them for this purpose.

However, it turns out that setting power.direct_complete outside of
the PM core is a bad idea as it triggers an excess invocation of
pm_runtime_enable() in device_resume().

For this reason, provide a helper to clear power.is_late_suspended
and power.is_suspended to be invoked by the middle-layer code in
question instead of setting power.direct_complete and make that code
call the new helper.

Fixes: c4b65157ae (PCI / PM: Take SMART_SUSPEND driver flag into account)
Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-11 14:32:56 +01:00
George Cherian 1ecbd7170d ACPI / CPPC: Fix KASAN global out of bounds warning
Default value of pcc_subspace_idx is -1.
Make sure to check pcc_subspace_idx before using the same as array index.
This will avoid following KASAN warnings too.

[   15.113449] ==================================================================
[   15.116983] BUG: KASAN: global-out-of-bounds in cppc_get_perf_caps+0xf3/0x3b0
[   15.116983] Read of size 8 at addr ffffffffb9a5c0d8 by task swapper/0/1
[   15.116983] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2+ #2
[   15.116983] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016
[   15.116983] Call Trace:
[   15.116983]  dump_stack+0x7c/0xbb
[   15.116983]  print_address_description+0x1df/0x290
[   15.116983]  kasan_report+0x28a/0x370
[   15.116983]  ? cppc_get_perf_caps+0xf3/0x3b0
[   15.116983]  cppc_get_perf_caps+0xf3/0x3b0
[   15.116983]  ? cpc_read+0x210/0x210
[   15.116983]  ? __rdmsr_on_cpu+0x90/0x90
[   15.116983]  ? rdmsrl_on_cpu+0xa9/0xe0
[   15.116983]  ? rdmsr_on_cpu+0x100/0x100
[   15.116983]  ? wrmsrl_on_cpu+0x9c/0xd0
[   15.116983]  ? wrmsrl_on_cpu+0x9c/0xd0
[   15.116983]  ? wrmsr_on_cpu+0xe0/0xe0
[   15.116983]  __intel_pstate_cpu_init.part.16+0x3a2/0x530
[   15.116983]  ? intel_pstate_init_cpu+0x197/0x390
[   15.116983]  ? show_no_turbo+0xe0/0xe0
[   15.116983]  ? __lockdep_init_map+0xa0/0x290
[   15.116983]  intel_pstate_cpu_init+0x30/0x60
[   15.116983]  cpufreq_online+0x155/0xac0
[   15.116983]  cpufreq_add_dev+0x9b/0xb0
[   15.116983]  subsys_interface_register+0x1ae/0x290
[   15.116983]  ? bus_unregister_notifier+0x40/0x40
[   15.116983]  ? mark_held_locks+0x83/0xb0
[   15.116983]  ? _raw_write_unlock_irqrestore+0x32/0x60
[   15.116983]  ? intel_pstate_setup+0xc/0x104
[   15.116983]  ? intel_pstate_setup+0xc/0x104
[   15.116983]  ? cpufreq_register_driver+0x1ce/0x2b0
[   15.116983]  cpufreq_register_driver+0x1ce/0x2b0
[   15.116983]  ? intel_pstate_setup+0x104/0x104
[   15.116983]  intel_pstate_register_driver+0x3a/0xa0
[   15.116983]  intel_pstate_init+0x3c4/0x434
[   15.116983]  ? intel_pstate_setup+0x104/0x104
[   15.116983]  ? intel_pstate_setup+0x104/0x104
[   15.116983]  do_one_initcall+0x9c/0x206
[   15.116983]  ? parameq+0xa0/0xa0
[   15.116983]  ? initcall_blacklisted+0x150/0x150
[   15.116983]  ? lock_downgrade+0x2c0/0x2c0
[   15.116983]  kernel_init_freeable+0x327/0x3f0
[   15.116983]  ? start_kernel+0x612/0x612
[   15.116983]  ? _raw_spin_unlock_irq+0x29/0x40
[   15.116983]  ? finish_task_switch+0xdd/0x320
[   15.116983]  ? finish_task_switch+0x8e/0x320
[   15.116983]  ? rest_init+0xd0/0xd0
[   15.116983]  kernel_init+0xf/0x11a
[   15.116983]  ? rest_init+0xd0/0xd0
[   15.116983]  ret_from_fork+0x24/0x30

[   15.116983] The buggy address belongs to the variable:
[   15.116983]  __key.36299+0x38/0x40

[   15.116983] Memory state around the buggy address:
[   15.116983]  ffffffffb9a5bf80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa
[   15.116983]  ffffffffb9a5c000: fa fa fa fa 00 fa fa fa fa fa fa fa 00 fa fa fa
[   15.116983] >ffffffffb9a5c080: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00
[   15.116983]                                                     ^
[   15.116983]  ffffffffb9a5c100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   15.116983]  ffffffffb9a5c180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   15.116983] ==================================================================

Fixes: 85b1407bf6 (ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs)
Reported-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-05 23:25:49 +01:00
Rafael J. Wysocki b6c7026872 Merge branch 'acpi-ec' into acpi
* acpi-ec:
  ACPI / EC: Fix regression related to PM ops support in ECDT device
2017-11-30 13:37:29 +01:00
Lv Zheng a64a62ce9a ACPI / EC: Fix regression related to PM ops support in ECDT device
On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT
EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an
ACPI device. Thus the following commit actually removed post-resume
acpi_ec_enable_event() invocation for such platforms, and triggered a
regression on them that after being resumed, EC (actually should be ECDT)
driver stops handling EC events:

 Commit: c2b46d679b
 Subject: ACPI / EC: Add PM operations to improve event handling for resume process

Notice that the root cause actually is "ECDT is not an ACPI device" rather
than "the timing of acpi_ec_enable_event() invocation", this patch fixes
this issue by enumerating ECDT EC as an ACPI device. Due to the existence
of the noirq stage, the ability of tuning the timing of
acpi_ec_enable_event() invocation is still meaningful.

This patch is a little bit different from the posted fix by moving
acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make
sure that EC event handling won't be stopped as long as the ACPI EC driver
is bound. Thus the following sequence shouldn't disable EC event handling:
unbind,suspend,resume,bind.

Fixes: c2b46d679b (ACPI / EC: Add PM operations to improve event handling for resume process)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847
Reported-by: Luya Tshimbalanga <luya@fedoraproject.org>
Tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-21 00:13:02 +01:00
Hans de Goede 10809bb976 ACPI / bus: Leave modalias empty for devices which are not present
Most Bay and Cherry Trail devices use a generic DSDT with all possible
peripheral devices present in the DSDT, with their _STA returning 0x00 or
0x0f based on AML variables which describe what is actually present on
the board.

Since ACPI device objects with a 0x00 status (not present) still get an
entry under /sys/bus/acpi/devices, and those entry had an acpi:PNPID
modalias, userspace would end up loading modules for non present hardware.

This commit fixes this by leaving the modalias empty for non present
devices. This results in 10 modules less being loaded with a generic
distro kernel config on my Cherry Trail test-device (a GPD pocket).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-20 23:48:51 +01:00
Linus Torvalds 190b10367b ACPI fix for v4.15-rc1
This fixes a possible memory leak in an error code path in one of
 the utility routines (Xiongfeng Wang).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJaDvCzAAoJEILEb/54YlRxgxkP/1b99cXWA8FRuHaAdoieCYuZ
 XSV1zWwMwsJzgR68x27xyDpAE5KJpJ4fZCNiNODCjQwlE2lRMMIp5+O+Dy/k7LLM
 pqEuUTVCOKNKHmONdiCJKXgCKCXmNU0ACVQyBkEZ1J5DGTnLnwvU2fqSVWA4NCkU
 /7YG8/iWPtoKyxFQkMhm8g6zeP8b2tM91EoQdsBa8e1l/+kT4H/ZfXHWX8ep8JcM
 KcNwcjdHLNZjSmzVm47kCSZKwKhF22E59Dsoy5LQk7TDdo193RX5mGQ4G0DMb1uT
 V2o4K5f+dHVNrTPmcL8P6yxKorxCGTBymhQy0EixKm6U8mMLNYVVuufdWYtqtYJX
 0ARYqrhqflXnhFYrvjGDEVd119HLYw4A5xFE7PylDJgoWVPKw7tDvZm7UlgHVOjm
 zQ7KMrRSbGVrxsOB2UhTUXUZwYMvg17UV3o+LzeY5rqkwb+USpLyCHOIxsm781vw
 ZgdhzFcf8cqa/yLX/9q4vxHocqDpQZ6hS6gUoCkvGkflFKsb0Ozlb5Ow6hhk3xOx
 sGEtCBVXne6HfLoaEnaADjqlXIVnZjiRZOVMP9zII/JkAp8ImSqjsVlStVNI56PY
 iro4dTvZygftm457RLsGIi6GYVphthiLVWhau0WC8rSka/85PLBqCcdQVBlenGWW
 Ka4tUGK671GQFC1vaN/f
 =Qli/
 -----END PGP SIGNATURE-----

Merge tag 'acpi-fix-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "This fixes a possible memory leak in an error code path in one of the
  utility routines (Xiongfeng Wang)"

* tag 'acpi-fix-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / utils: Fix memory leak in acpi_evaluate_reference() error path
2017-11-17 14:51:24 -08:00
Linus Torvalds a3841f94c7 libnvdimm for 4.15
* Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
  'userspace flush' of persistent memory updates via filesystem-dax
   mappings. It arranges for any filesystem metadata updates that may be
   required to satisfy a write fault to also be flushed ("on disk") before
   the kernel returns to userspace from the fault handler. Effectively
   every write-fault that dirties metadata completes an fsync() before
   returning from the fault handler. The new MAP_SHARED_VALIDATE mapping
   type guarantees that the MAP_SYNC flag is validated as supported by the
   filesystem's ->mmap() file operation.
 
 * Add support for the standard ACPI 6.2 label access methods that
   replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This
   enables interoperability with environments that only implement the
   standardized methods.
 
 * Add support for the ACPI 6.2 NVDIMM media error injection methods.
 
 * Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch
   last shutdown status, firmware update, SMART error injection, and
   SMART alarm threshold control.
 
 * Cleanup physical address information disclosures to be root-only.
 
 * Fix revalidation of the DIMM "locked label area" status to support
   dynamic unlock of the label area.
 
 * Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
   (system-physical-address) command and error injection commands.
 
 Acknowledgements that came after the commits were pushed to -next:
 
 957ac8c421 dax: fix PMD faults on zero-length files
 Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
 
 a39e596baa xfs: support for synchronous DAX faults
 Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
 
 7b565c9f96 xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
 Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaDfvcAAoJEB7SkWpmfYgCk7sP/2qJhBH+VTTdg2osDnhAdAhI
 co/AGEmsHFlUCMBb/Ek7UnMAmhBYiJU2q4ywPsNFBpusXpMlqNy5Iwo7k4/wQHE/
 SJcIM0g4zg0ViFuUhwV+C2T0R5UzFR8JLd9EYWj/YS6aJpurtotm5l4UStaM0Hzo
 AhxSXJLrBDuqCpbOxbctfiGEmdRL7aRfBEAARTNRKBn/iXxJUcYHlp62rtXQS+t4
 I6LC/URCWTNTTMGmzW6TRsgSD9WMfd19xKcGzN3qL6ee0KFccxN4ctFqHA/sFGOh
 iYLeR0XJUjJxyp+PkWGteXPVZL0Kj3bD/lSTG+Co5bm/ra8a/sh3TSFfgFyoBZD1
 EqMN8Ryf80hGp3FabeH2Iw2SviYPZpHSWgjddjxLD0RA6OmpzINc+Wm8eqApjMME
 sbZDTOijiab4QMQ0XamF4GuDHyQtawv5Y/w2Ehhl1tmiqW+5tKhsKqxkQt+/V3Yt
 RTVSRe2Pkway66b+cD64IdQ6L2tyonPnmi5IzgkKOhlOEGomy+4/U2Jt2bMbhzq6
 ymszKmXp2XI8P06wU8sHrIUeXO5I9qoKn/fZA73Eb8aIzgJe3tBE/5+Ab7RG6HB9
 1OVfcMWoXU1gNgNktTs63X1Lsg4aW9kt/K4fPHHcqUcaliEJpJTlAbg9GLF2buoW
 nQ+0fTRgMRihE3ZA0Fs3
 =h2vZ
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm and dax updates from Dan Williams:
 "Save for a few late fixes, all of these commits have shipped in -next
  releases since before the merge window opened, and 0day has given a
  build success notification.

  The ext4 touches came from Jan, and the xfs touches have Darrick's
  reviewed-by. An xfstest for the MAP_SYNC feature has been through
  a few round of reviews and is on track to be merged.

   - Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable
     'userspace flush' of persistent memory updates via filesystem-dax
     mappings. It arranges for any filesystem metadata updates that may
     be required to satisfy a write fault to also be flushed ("on disk")
     before the kernel returns to userspace from the fault handler.
     Effectively every write-fault that dirties metadata completes an
     fsync() before returning from the fault handler. The new
     MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag
     is validated as supported by the filesystem's ->mmap() file
     operation.

   - Add support for the standard ACPI 6.2 label access methods that
     replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods.
     This enables interoperability with environments that only implement
     the standardized methods.

   - Add support for the ACPI 6.2 NVDIMM media error injection methods.

   - Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for
     latch last shutdown status, firmware update, SMART error injection,
     and SMART alarm threshold control.

   - Cleanup physical address information disclosures to be root-only.

   - Fix revalidation of the DIMM "locked label area" status to support
     dynamic unlock of the label area.

   - Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA
     (system-physical-address) command and error injection commands.

  Acknowledgements that came after the commits were pushed to -next:

   - 957ac8c421 ("dax: fix PMD faults on zero-length files"):
       Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>

   - a39e596baa ("xfs: support for synchronous DAX faults") and
     7b565c9f96 ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()")
        Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>"

* tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits)
  acpi, nfit: add 'Enable Latch System Shutdown Status' command support
  dax: fix general protection fault in dax_alloc_inode
  dax: fix PMD faults on zero-length files
  dax: stop requiring a live device for dax_flush()
  brd: remove dax support
  dax: quiet bdev_dax_supported()
  fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core
  tools/testing/nvdimm: unit test clear-error commands
  acpi, nfit: validate commands against the device type
  tools/testing/nvdimm: stricter bounds checking for error injection commands
  xfs: support for synchronous DAX faults
  xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()
  ext4: Support for synchronous DAX faults
  ext4: Simplify error handling in ext4_dax_huge_fault()
  dax: Implement dax_finish_sync_fault()
  dax, iomap: Add support for synchronous faults
  mm: Define MAP_SYNC and VM_SYNC flags
  dax: Allow tuning whether dax_insert_mapping_entry() dirties entry
  dax: Allow dax_iomap_fault() to return pfn
  dax: Fix comment describing dax_iomap_fault()
  ...
2017-11-17 09:51:57 -08:00
Linus Torvalds d3092e4e99 - New Drivers
- Add support for Cherry Trail Dollar Cove TI PMIC
    - Add support for Add Spreadtrum SC27xx series PMICs
 
  - New Device Support
    - Add support Regulator to axp20x
 
  - New Functionality
    - Add DT support; aspeed-scu sc27xx-pmic
    - Add power saving support; rts5249
 
  - Fix-ups
    - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218
    - Staticise/constify; stw481x
    - Use new succinct IRQ API; fsl-imx25-tsadc
    - Kconfig fix-ups; MFD_TPS65218
    - Identify SPI method; lpc_ich
    - Use managed resources (devm_*) calls; ssbi
    - Remove unused/obsolete code/documentation; mc13xxx
 
  - Bug Fixes
    - Fix typo in MAINTAINERS
    - Fix error handling; mxs-lradc
    - Clean-up IRQs on .remove; fsl-imx25-tsadc
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJaDaBsAAoJEFGvii+H/HdhfGUP/itBfs94YdkUeDFyWzfbg6ib
 X1t+3mXhPQiVAt91EBwl6JD7FQgdqoB/g4pNf937bFQ+Rm8Sd4R/a5J1KQ8Zta4H
 QaMmlhi6Fy5NWh2gmjuC3KoGOeXz9zAaaDH3SeAs98XCN55Akf6Tt1Us2Wp9VHkq
 PoMfwZXlqb4KggvEaraQS4QvTVXuKIoq49LmqUMxBhInMwoT9qwiI/PSWDfirzQk
 TLA3LOEjLpRKZQuHR+kovQOU2wnwmiOhBFuVuaYixPqDYFvm3/2KtuPKW79KzQPX
 vsi7/x4ShPB55extHPhuoRkjbp/7gvZQS2iW5NufJfrcu3m1kEnu5DLAB6e+4SHs
 ZE52MviFrCFoAXyXRvHBdzqgGKEzq2Jhlse4j+HRXVLOzIW8PzVM4MkZvfVFcqYx
 4BQuxdM6+oUGAqeKlmydaMTng8o/UfRainQ1dIGAblk5DCR+SHxqt582f9qyLAhT
 55OMFJG/bQ4cW86EXWtp+8DUA4Aoz5ZIJ+C5IrYKOA2ScQo//imoH5Hz1PH1m91O
 GebDdw7AijGLbSqXSu4aRfFe9+Whyo2387A+1Zd9zdfLyiOQ1n5ty6ClRsCfDJ8P
 K4ONmZL7H5n8I8j3eyivn+k1MelIdfG0hB8YS0NnYvR3pR9AY1NWCgO0f4rfyU9o
 whyvIqg22EepnbEJjjFv
 =LAK+
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New drivers:
   - Add support for Cherry Trail Dollar Cove TI PMIC
   - Add support for Add Spreadtrum SC27xx series PMICs

  New device support:
   - Add support Regulator to axp20x

  New functionality:
   - Add DT support; aspeed-scu sc27xx-pmic
   - Add power saving support; rts5249

  Fix-ups:
   - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218
   - Staticise/constify; stw481x
   - Use new succinct IRQ API; fsl-imx25-tsadc
   - Kconfig fix-ups; MFD_TPS65218
   - Identify SPI method; lpc_ich
   - Use managed resources (devm_*) calls; ssbi
   - Remove unused/obsolete code/documentation; mc13xxx

  Bug fixes:
   - Fix typo in MAINTAINERS
   - Fix error handling; mxs-lradc
   - Clean-up IRQs on .remove; fsl-imx25-tsadc"

* tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (21 commits)
  dt-bindings: mfd: mc13xxx: Remove obsolete property
  mfd: axp20x: Add axp20x-regulator cell for AXP813
  mfd: Add Spreadtrum SC27xx series PMICs driver
  dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation
  mfd: ssbi: Use devm_of_platform_populate()
  mfd: fsl-imx25: Clean up irq settings during removal
  mfd: mxs-lradc: Fix error handling in mxs_lradc_probe()
  mfd: lpc_ich: Avoton/Rangeley uses SPI_BYT method
  mfd: tps65218: Introduce dependency on CONFIG_OF
  mfd: tps65218: Correct the config description
  MAINTAINERS: Fix Dialog search term for watchdog binding file
  mfd: fsl-imx25: Set irq handler and data in one go
  mfd: rts5249: Add support for RTS5250S power saving
  ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC
  mfd: Add support for Cherry Trail Dollar Cove TI PMIC
  syscon: dt-bindings: Add binding document for iProc MHB block
  syscon: dt-bindings: Add binding doc for Broadcom iProc CDRU
  mfd: max77693: Add muic of_compatible in mfd_cell
  mfd: stw481x: Make three arrays static const, reduces object code size
  mfd: tps65217: Introduce dependency on CONFIG_OF
  ...
2017-11-16 09:15:57 -08:00
Dan Williams 4247f24c23 Merge branch 'for-4.15/dax' into libnvdimm-for-next 2017-11-15 16:56:11 -08:00
Dan Williams 79ab67ede2 acpi, nfit: add 'Enable Latch System Shutdown Status' command support
The NVDIMM_FAMILY_INTEL 'Enable Latch System Shutdown Status' command
indicates to the platform that system software has acknowledged the most
recent unsafe shutdown status.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-15 16:55:41 -08:00
Linus Torvalds 1be2172e96 Modules updates for v4.15
Summary of modules changes for the 4.15 merge window:
 
 - Treewide module_param_call() cleanup, fix up set/get function
   prototype mismatches, from Kees Cook
 
 - Minor code cleanups
 
 Signed-off-by: Jessica Yu <jeyu@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJaDCyzAAoJEMBFfjjOO8FyaYQP/AwHBy6XmwwVlWDP4BqIF6hL
 Vhy3ccVLYEORvePv68tWSRPUz5n6+1Ebqanmwtkw6i8l+KwxY2SfkZql09cARc33
 2iBE4bHF98iWQmnJbF6me80fedY9n5bZJNMQKEF9VozJWwTMOTQFTCfmyJRDBmk9
 iidQj6M3idbSUOYIJjvc40VGx5NyQWSr+FFfqsz1rU5iLGRGEvA3I2/CDT0oTuV6
 D4MmFxzE2Tv/vIMa2GzKJ1LGScuUfSjf93Lq9Kk0cG36qWao8l930CaXyVdE9WJv
 bkUzpf3QYv/rDX6QbAGA0cada13zd+dfBr8YhchclEAfJ+GDLjMEDu04NEmI6KUT
 5lP0Xw0xYNZQI7bkdxDMhsj5jaz/HJpXCjPCtZBnSEKiL4OPXVMe+pBHoCJ2/yFN
 6M716XpWYgUviUOdiE+chczB5p3z4FA6u2ykaM4Tlk0btZuHGxjcSWwvcIdlPmjm
 kY4AfDV6K0bfEBVguWPJicvrkx44atqT5nWbbPhDwTSavtsuRJLb3GCsHedx7K8h
 ZO47lCQFAWCtrycK1HYw+oupNC3hYWQ0SR42XRdGhL1bq26C+1sei1QhfqSgA9PQ
 7CwWH4UTOL9fhtrzSqZngYOh9sjQNFNefqQHcecNzcEjK2vjrgQZvRNWZKHSwaFs
 fbGX8juZWP4ypbK+irTB
 =c8vb
 -----END PGP SIGNATURE-----

Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

Pull module updates from Jessica Yu:
 "Summary of modules changes for the 4.15 merge window:

   - treewide module_param_call() cleanup, fix up set/get function
     prototype mismatches, from Kees Cook

   - minor code cleanups"

* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Do not paper over type mismatches in module_param_call()
  treewide: Fix function prototypes for module_param_call()
  module: Prepare to convert all module_param_call() prototypes
  kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-15 13:46:33 -08:00
Linus Torvalds c9b012e5f4 arm64 updates for 4.15
Plenty of acronym soup here:
 
 - Initial support for the Scalable Vector Extension (SVE)
 - Improved handling for SError interrupts (required to handle RAS events)
 - Enable GCC support for 128-bit integer types
 - Remove kernel text addresses from backtraces and register dumps
 - Use of WFE to implement long delay()s
 - ACPI IORT updates from Lorenzo Pieralisi
 - Perf PMU driver for the Statistical Profiling Extension (SPE)
 - Perf PMU driver for Hisilicon's system PMUs
 - Misc cleanups and non-critical fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJaCcLqAAoJELescNyEwWM0JREH/2FbmD/khGzEtP8LW+o9D8iV
 TBM02uWQxS1bbO1pV2vb+512YQO+iWfeQwJH9Jv2FZcrMvFv7uGRnYgAnJuXNGrl
 W+LL6OhN22A24LSawC437RU3Xe7GqrtONIY/yLeJBPablfcDGzPK1eHRA0pUzcyX
 VlyDruSHWX44VGBPV6JRd3x0vxpV8syeKOjbRvopRfn3Nwkbd76V3YSfEgwoTG5W
 ET1sOnXLmHHdeifn/l1Am5FX1FYstpcd7usUTJ4Oto8y7e09tw3bGJCD0aMJ3vow
 v1pCUWohEw7fHqoPc9rTrc1QEnkdML4vjJvMPUzwyTfPrN+7uEuMIEeJierW+qE=
 =0qrg
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "The big highlight is support for the Scalable Vector Extension (SVE)
  which required extensive ABI work to ensure we don't break existing
  applications by blowing away their signal stack with the rather large
  new vector context (<= 2 kbit per vector register). There's further
  work to be done optimising things like exception return, but the ABI
  is solid now.

  Much of the line count comes from some new PMU drivers we have, but
  they're pretty self-contained and I suspect we'll have more of them in
  future.

  Plenty of acronym soup here:

   - initial support for the Scalable Vector Extension (SVE)

   - improved handling for SError interrupts (required to handle RAS
     events)

   - enable GCC support for 128-bit integer types

   - remove kernel text addresses from backtraces and register dumps

   - use of WFE to implement long delay()s

   - ACPI IORT updates from Lorenzo Pieralisi

   - perf PMU driver for the Statistical Profiling Extension (SPE)

   - perf PMU driver for Hisilicon's system PMUs

   - misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
  arm64: Make ARMV8_DEPRECATED depend on SYSCTL
  arm64: Implement __lshrti3 library function
  arm64: support __int128 on gcc 5+
  arm64/sve: Add documentation
  arm64/sve: Detect SVE and activate runtime support
  arm64/sve: KVM: Hide SVE from CPU features exposed to guests
  arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
  arm64/sve: KVM: Prevent guests from using SVE
  arm64/sve: Add sysctl to set the default vector length for new processes
  arm64/sve: Add prctl controls for userspace vector length management
  arm64/sve: ptrace and ELF coredump support
  arm64/sve: Preserve SVE registers around EFI runtime service calls
  arm64/sve: Preserve SVE registers around kernel-mode NEON use
  arm64/sve: Probe SVE capabilities and usable vector lengths
  arm64: cpufeature: Move sys_caps_initialised declarations
  arm64/sve: Backend logic for setting the vector length
  arm64/sve: Signal handling support
  arm64/sve: Support vector length resetting for new processes
  arm64/sve: Core task context handling
  arm64/sve: Low-level CPU setup
  ...
2017-11-15 10:56:56 -08:00
Linus Torvalds 4008e6a9bc Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "This contains two bigger than usual tree-wide changes this time. They
  all have proper acks, caused no merge conflicts in linux-next where
  they have been for a while. They are namely:

   - to-gpiod conversion of the i2c-gpio driver and its users (touching
     arch/* and drivers/mfd/*)

   - adding a sbs-manager based on I2C core updates to SMBus alerts
     (touching drivers/power/*)

  Other notable changes:

   - i2c_boardinfo can now carry a dev_name to be used when the device
     is created. This is because some devices in ACPI world need fixed
     names to find the regulators.

   - the designware driver got a long discussed overhaul of its PM
     handling. img-scb and davinci got PM support, too.

   - at24 driver has way better OF support. And it has a new maintainer.
     Thanks Bartosz for stepping up!

  The rest is regular driver updates and fixes"

* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
  ARM: sa1100: simpad: Correct I2C GPIO offsets
  i2c: aspeed: Deassert reset in probe
  eeprom: at24: Add OF device ID table
  MAINTAINERS: new maintainer for AT24 driver
  i2c: nuc900: remove platform_data, too
  i2c: thunderx: Remove duplicate NULL check
  i2c: taos-evm: Remove duplicate NULL check
  i2c: Make i2c_unregister_device() NULL-aware
  i2c: xgene-slimpro: Support v2
  i2c: mpc: remove useless variable initialization
  i2c: omap: Trigger bus recovery in lockup case
  i2c: gpio: Add support for named gpios in DT
  dt-bindings: i2c: i2c-gpio: Add support for named gpios
  i2c: gpio: Local vars in probe
  i2c: gpio: Augment all boardfiles to use open drain
  i2c: gpio: Enforce open drain through gpiolib
  gpio: Make it possible for consumers to enforce open drain
  i2c: gpio: Convert to use descriptors
  power: supply: sbs-message: fix some code style issues
  power: supply: sbs-battery: remove unchecked return var
  ...
2017-11-14 17:52:21 -08:00
Linus Torvalds abc36be236 A couple of configfs cleanups:
- proper use of the bool type (Thomas Meyer)
   - constification of struct config_item_type (Bhumika Goyal)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAloLSTALHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYNxfhAAv3cunxiEPEAvs+1xuGd3cZYaxz7qinvIODPxIKoF
 kRWiuy5PUklRMnJ8seOgJ1p1QokX6Sk4cZ8HcctDJVByqODjOq4K5eaKVN1ZqJoz
 BUzO/gOqfs64r9yaFIlKfe8nFA+gpUftSeWyv3lThxAIJ1iSbue7OZ/A10tTOS1m
 RWp9FPepFv+nJMfWqeQU64BsoDQ4kgZ2NcEA+jFxNx5dlmIbLD49tk0lfddvZQXr
 j5WyAH73iugilLtNUGVOqSzHBY4kUvfCKUV7leirCegyMoGhFtA87m6Wzwbo6ZUI
 DwQLzWvuPaGv1P2PpNEHfKiNbfIEp75DRyyyf87DD3lc5ffAxQSm28mGuwcr7Rn5
 Ow/yWL6ERMzCLExoCzEkXYJISy7T5LIzYDgNggKMpeWxysAduF7Onx7KfW1bTuhK
 mHvY7iOXCjEvaIVaF8uMKE6zvuY1vCMRXaJ+kC9jcIE3gwhg+2hmQvrdJ2uAFXY+
 rkeF2Poj/JlblPU4IKWAjiPUbzB7Lv0gkypCB2pD4riaYIN5qCAgF8ULIGQp2hsO
 lYW1EEgp5FBop85oSO/HAGWeH9dFg0WaV7WqNRVv0AGXhKjgy+bVd7iYPpvs7mGw
 z9IqSQDORcG2ETLcFhZgiJpCk/itwqXBD+wgMOjJPP8lL+4kZ8FcuhtY9kc9WlJE
 Tew=
 =+tMO
 -----END PGP SIGNATURE-----

Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs

Pull configfs updates from Christoph Hellwig:
 "A couple of configfs cleanups:

   - proper use of the bool type (Thomas Meyer)

   - constification of struct config_item_type (Bhumika Goyal)"

* tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs:
  RDMA/cma: make config_item_type const
  stm class: make config_item_type const
  ACPI: configfs: make config_item_type const
  nvmet: make config_item_type const
  usb: gadget: configfs: make config_item_type const
  PCI: endpoint: make config_item_type const
  iio: make function argument and some structures const
  usb: gadget: make config_item_type structures const
  dlm: make config_item_type const
  netconsole: make config_item_type const
  nullb: make config_item_type const
  ocfs2/cluster: make config_item_type const
  target: make config_item_type const
  configfs: make ci_type field, some pointers and function arguments const
  configfs: make config_item_type const
  configfs: Fix bool initialization/comparison
2017-11-14 14:44:04 -08:00
Xiongfeng Wang 09e1508693 ACPI / utils: Fix memory leak in acpi_evaluate_reference() error path
When package.count is larger than ACPI_MAX_HANDLES, buffer.pointer is
not freed before the function returns AE_NO_MEMORY. Fix this possible
memory leak by kfree'ing it.

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-14 12:54:55 +01:00
Linus Torvalds fb0255fb29 TTY/Serial patches for 4.15-rc1
Here is the big tty/serial driver pull request for 4.15-rc1.
 
 Lots of serial driver updates in here, some small vt cleanups, and a
 raft of SPDX and license boilerplate cleanups, messing up the diffstat a
 bit.
 
 Nothing major, with no realy functional changes except better hardware
 support for some platforms.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnD+w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynAmgCfSSr/9qiCE0vfP5eVYjddzxfWyZ4AoMbKORZC
 5x2KVW0Btrbs3WmnD7ZU
 =PSea
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here is the big tty/serial driver pull request for 4.15-rc1.

  Lots of serial driver updates in here, some small vt cleanups, and a
  raft of SPDX and license boilerplate cleanups, messing up the diffstat
  a bit.

  Nothing major, with no realy functional changes except better hardware
  support for some platforms.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits)
  tty: ehv_bytechan: fix spelling mistake
  tty: serial: meson: allow baud-rates lower than 9600
  serial: 8250_fintek: Fix crash with baud rate B0
  serial: 8250_fintek: Disable delays for ports != 0
  serial: 8250_fintek: Return -EINVAL on invalid configuration
  tty: Remove redundant license text
  tty: serdev: Remove redundant license text
  tty: hvc: Remove redundant license text
  tty: serial: Remove redundant license text
  tty: add SPDX identifiers to all remaining files in drivers/tty/
  tty: serial: jsm: remove redundant pointer ts
  tty: serial: jsm: add space before the open parenthesis '('
  tty: serial: jsm: fix coding style
  tty: serial: jsm: delete space between function name and '('
  tty: serial: jsm: add blank line after declarations
  tty: serial: jsm: change the type of local variable
  tty: serial: imx: remove dead code imx_dma_rxint
  tty: serial: imx: disable ageing timer interrupt if dma in use
  serial: 8250: fix potential deadlock in rs485-mode
  serial: m32r_sio: Drop redundant .data assignment
  ...
2017-11-13 21:05:31 -08:00
Linus Torvalds 04ed510988 ACPI updates for v4.15-rc1
- Update the ACPICA code to upstream revision 20170831 including
    * PDTT table header support (Bob Moore).
    * Cleanup and extension of internal string-to-integer conversion
      functions (Bob Moore).
    * Support for 64-bit hardware accesses (Lv Zheng).
    * ACPI PM Timer code adjustment to deal with 64-bit return values
      of acpi_hw_read() (Bob Moore).
    * Support for deferred table verification in acpiexec (Lv Zheng).
 
  - Fix APEI to use the fixmap instead of ioremap_page_range() which
    cannot work correctly the way the code in there attempted to use
    it and drop some code that's not necessary any more after that
    change (James Morse).
 
  - Clean up the APEI support code and make it use 64-bit timestamps
    (Arnd Bergmann, Dongjiu Geng, Jan Beulich).
 
  - Add operation region driver for TI PMIC TPS68470 (Rajmohan Mani).
 
  - Add support for PCC subspace IDs to the ACPI CPPC driver (George
    Cherian).
 
  - Fix an ACPI EC driver regression related to the handling of EC
    events during the "noirq" phases of system suspend/resume (Lv
    Zheng).
 
  - Delay the initialization of the lid state in the ACPI button
    driver to fix issues appearing on some systems (Hans de Goede).
 
  - Extend the KIOX000A "device always present" quirk to cover all
    affected BIOS versions (Hans de Goede).
 
  - Clean up some code in the ACPI core and drivers (Colin Ian King,
    Gustavo Silva).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJaCg33AAoJEILEb/54YlRxTe0P/jEFsSXCmAussc0DoqcXuep/
 GEzsMHZLBU59oVTVqiji19vkVEiJldANmnFniMTr3sJ52QSgLQH4Wtv5QGzTCmUq
 C3VzfSye5QS726f/Fk4tgZIFy5WL3EzweEbPmrcsFQvShU/vNHzvGUNcnPy9IWXE
 O+kISx8YTB6z4laa9cJLjTMEuDgRUpyubb9dZBBvXC7RIuHstk8+GyLvvPImKGBL
 sk5PNChP0WGLLSG7BayOUG3/7Q2RaFpbgjCos2dounPAJW5TXmMJUsZ0gvtXy0Z8
 ZoPmqgPlYYlHVBlpy7oO4WGFLYJ+KZ+w27aEN1n0C3n9BU9AqWBKw8nkxfpCgPxy
 3p2dwuh1igHsCAEVaaGjw02bewszIdl68q3ZfC7xujE401SG+Py7VCnTAbkffC0M
 nXP8RlGg4V3blwvNM47g3Hh8VG7vJgsW2fvBdSQa/Za7ML8aqxkvtk1BzhDCN19X
 tIqn9RMLWoPSnrEdqSi4HK88iHRvagPJncemFyDQl4LE+V5rWBCUqNumLLjL2i4L
 uBxqlK3tBVWKM0iKmISDHpjUZHaqM3g/Lmyo3aExWTog06OB81hMG3b57RrbWj9t
 1PIbQOtAazhqM4Scdg1mWTaRNR1p40V9RyA6YvqTIbjDRDPkxEfIUECvRBFwgWkd
 JtFkKwR65EFkH8bGNXQi
 =7mrU
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update ACPICA to upstream revision 20170831, fix APEI to use the
  fixmap instead of ioremap_page_range(), add an operation region driver
  for TI PMIC TPS68470, add support for PCC subspace IDs to the ACPI
  CPPC driver, fix a few assorted issues and clean up some code.

  Specifics:

   - Update the ACPICA code to upstream revision 20170831 including
      * PDTT table header support (Bob Moore).
      * Cleanup and extension of internal string-to-integer conversion
        functions (Bob Moore).
      * Support for 64-bit hardware accesses (Lv Zheng).
      * ACPI PM Timer code adjustment to deal with 64-bit return values
        of acpi_hw_read() (Bob Moore).
      * Support for deferred table verification in acpiexec (Lv Zheng).

   - Fix APEI to use the fixmap instead of ioremap_page_range() which
     cannot work correctly the way the code in there attempted to use it
     and drop some code that's not necessary any more after that change
     (James Morse).

   - Clean up the APEI support code and make it use 64-bit timestamps
     (Arnd Bergmann, Dongjiu Geng, Jan Beulich).

   - Add operation region driver for TI PMIC TPS68470 (Rajmohan Mani).

   - Add support for PCC subspace IDs to the ACPI CPPC driver (George
     Cherian).

   - Fix an ACPI EC driver regression related to the handling of EC
     events during the "noirq" phases of system suspend/resume (Lv
     Zheng).

   - Delay the initialization of the lid state in the ACPI button driver
     to fix issues appearing on some systems (Hans de Goede).

   - Extend the KIOX000A "device always present" quirk to cover all
     affected BIOS versions (Hans de Goede).

   - Clean up some code in the ACPI core and drivers (Colin Ian King,
     Gustavo Silva)"

* tag 'acpi-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
  ACPI: Mark expected switch fall-throughs
  ACPI / LPSS: Remove redundant initialization of clk
  ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs
  mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file
  ACPI / sysfs: Make function param_set_trace_method_name() static
  ACPI / button: Delay acpi_lid_initialize_state() until first user space open
  ACPI / EC: Fix regression related to triggering source of EC event handling
  APEI / ERST: use 64-bit timestamps
  ACPI / APEI: Remove arch_apei_flush_tlb_one()
  arm64: mm: Remove arch_apei_flush_tlb_one()
  ACPI / APEI: Remove ghes_ioremap_area
  ACPI / APEI: Replace ioremap_page_range() with fixmap
  ACPI / APEI: remove the unused dead-code for SEA/NMI notification type
  ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions
  ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq()
  ACPICA: Update version to 20170831
  ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read
  ACPICA: String conversions: Update to add new behaviors
  ACPICA: String conversions: Cleanup/format comments. No functional changes
  ACPICA: Restructure/cleanup all string-to-integer conversion functions
  ...
2017-11-13 20:08:22 -08:00
Linus Torvalds bd2cd7d5a8 Power management updates for v4.15-rc1
- Relocate the OPP (Operating Performance Points) framework to its
    own directory under drivers/ and add support for power domain
    performance states to it (Viresh Kumar).
 
  - Modify the PM core, the PCI bus type and the ACPI PM domain to
    support power management driver flags allowing device drivers to
    specify their capabilities and preferences regarding the handling
    of devices with enabled runtime PM during system suspend/resume
    and clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
 
  - Add frequency-invariant accounting support to the task scheduler
    on ARM and ARM64 (Dietmar Eggemann).
 
  - Fix PM QoS device resume latency framework to prevent "no
    restriction" requests from overriding requests with specific
    requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
    device PM QoS flag (Rafael Wysocki).
 
  - Drop legacy class suspend/resume operations from the PM core
    and drop legacy bus type suspend and resume callbacks from
    ARM/locomo (Rafael Wysocki).
 
  - Add min/max frequency support to devfreq and clean it up
    somewhat (Chanwoo Choi).
 
  - Rework wakeup support in the generic power domains (genpd)
    framework and update some of its users accordingly (Geert
    Uytterhoeven).
 
  - Convert timers in the PM core to use timer_setup() (Kees Cook).
 
  - Add support for exposing the SLP_S0 (Low Power S0 Idle)
    residency counter based on the LPIT ACPI table on Intel
    platforms (Srinivas Pandruvada).
 
  - Add per-CPU PM QoS resume latency support to the ladder cpuidle
    governor (Ramesh Thomas).
 
  - Fix a deadlock between the wakeup notify handler and the
    notifier removal in the ACPI core (Ville Syrjälä).
 
  - Fix a cpufreq schedutil governor issue causing it to use
    stale cached frequency values sometimes (Viresh Kumar).
 
  - Fix an issue in the system suspend core support code causing
    wakeup events detection to fail in some cases (Rajat Jain).
 
  - Fix the generic power domains (genpd) framework to prevent
    the PM core from using the direct-complete optimization with
    it as that is guaranteed to fail (Ulf Hansson).
 
  - Fix a minor issue in the cpuidle core and clean it up a bit
    (Gaurav Jindal, Nicholas Piggin).
 
  - Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
    Baron, Len Brown, Leo Yan).
 
  - Fix a couple of minor issues in the OPP framework and clean it
    up (Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
 
  - Fix and clean up some cpufreq drivers and fix a minor issue in
    the cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
    Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
    Yamada, Robert Jarzmik, Zumeng Chen).
 
  - Fix minor issues in the system suspend and hibernation core, in
    power management documentation and in the AVS (Adaptive Voltage
    Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches,
    Rafael Wysocki).
 
  - Fix some issues in the cpupower utility and document that Shuah
    Khan is going to maintain it going forward (Prarit Bhargava,
    Shuah Khan).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJaCg2eAAoJEILEb/54YlRxGhAP/26D5TvfQ65wtf2W0Gas/tsP
 +24SzCLQO2GWalhbOXZbXhnBn/eCovKB6T8VB0V7Bff0VcUOK9szmBu9hOBJfXGN
 ec2oYKtWPwqzkgPfbqjZhQTp5EXg/dmWYOhAMA7HLMv7oVZqoRZ/MNOJPooXAmQj
 NEVWj3Eap0anic0ZgGMN4FaIMF6CHP2rAheqWQVXihhXpjIOWrJCjEoPZfbH1bFC
 +zd9Batd3rq+eZ5dYxg+znpYcZi69kmPw+KASYsaWTJzNjYbR+VLOxqzx7Icdgbz
 4glwWNe7lZGCAj+BIKGaHN5CR/fAXqkPvJ8csn6qISyUJ1Gph6otRfvuUaK58F4T
 1Rmcj+mGXgJBcjaQGmVQIITKD6drBW/l50MJlze5JUM4A7VM2Di/cctgoWmOJsnO
 2f6D6PYGuW0Fe8uUVGki/ddApXvoTGbEx+ncQ5+At+mLMKJwYfND9h2stOkCcrTy
 k4Pr+XpVU9hXwYVX3a1Au41bFQiXYwguxD1TH1LaY3liAWXvo0qNc/Ib6mW8e7pL
 wqPoe2/yxgVw5rsQPcKxVxAFFgjAAIdU3Xw44ETTPN315CLOoiuZgWkeTrnYCdix
 DaBWu1VN9tU5U6FWBlWXDb06i5qvSo3aYzLnSBC6fm7qX2SuDxGiQTcyOQ7H1NiQ
 d1wzhgObW98N7rZRaByu
 =QTnx
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "There are no real big ticket items here this time.

  The most noticeable change is probably the relocation of the OPP
  (Operating Performance Points) framework to its own directory under
  drivers/ as it has grown big enough for that. Also Viresh is now going
  to maintain it and send pull requests for it to me, so you will see
  this change in the git history going forward (but still not right
  now).

  Another noticeable set of changes is the modifications of the PM core,
  the PCI subsystem and the ACPI PM domain to allow of more integration
  between system-wide suspend/resume and runtime PM. For now it's just a
  way to avoid resuming devices from runtime suspend unnecessarily
  during system suspend (if the driver sets a flag to indicate its
  readiness for that) and in the works is an analogous mechanism to
  allow devices to stay suspended after system resume.

  In addition to that, we have some changes related to supporting
  frequency-invariant CPU utilization metrics in the scheduler and in
  the schedutil cpufreq governor on ARM and changes to add support for
  device performance states to the generic power domains (genpd)
  framework.

  The rest is mostly fixes and cleanups of various sorts.

  Specifics:

   - Relocate the OPP (Operating Performance Points) framework to its
     own directory under drivers/ and add support for power domain
     performance states to it (Viresh Kumar).

   - Modify the PM core, the PCI bus type and the ACPI PM domain to
     support power management driver flags allowing device drivers to
     specify their capabilities and preferences regarding the handling
     of devices with enabled runtime PM during system suspend/resume and
     clean up that code somewhat (Rafael Wysocki, Ulf Hansson).

   - Add frequency-invariant accounting support to the task scheduler on
     ARM and ARM64 (Dietmar Eggemann).

   - Fix PM QoS device resume latency framework to prevent "no
     restriction" requests from overriding requests with specific
     requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
     device PM QoS flag (Rafael Wysocki).

   - Drop legacy class suspend/resume operations from the PM core and
     drop legacy bus type suspend and resume callbacks from ARM/locomo
     (Rafael Wysocki).

   - Add min/max frequency support to devfreq and clean it up somewhat
     (Chanwoo Choi).

   - Rework wakeup support in the generic power domains (genpd)
     framework and update some of its users accordingly (Geert
     Uytterhoeven).

   - Convert timers in the PM core to use timer_setup() (Kees Cook).

   - Add support for exposing the SLP_S0 (Low Power S0 Idle) residency
     counter based on the LPIT ACPI table on Intel platforms (Srinivas
     Pandruvada).

   - Add per-CPU PM QoS resume latency support to the ladder cpuidle
     governor (Ramesh Thomas).

   - Fix a deadlock between the wakeup notify handler and the notifier
     removal in the ACPI core (Ville Syrjälä).

   - Fix a cpufreq schedutil governor issue causing it to use stale
     cached frequency values sometimes (Viresh Kumar).

   - Fix an issue in the system suspend core support code causing wakeup
     events detection to fail in some cases (Rajat Jain).

   - Fix the generic power domains (genpd) framework to prevent the PM
     core from using the direct-complete optimization with it as that is
     guaranteed to fail (Ulf Hansson).

   - Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav
     Jindal, Nicholas Piggin).

   - Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
     Baron, Len Brown, Leo Yan).

   - Fix a couple of minor issues in the OPP framework and clean it up
     (Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).

   - Fix and clean up some cpufreq drivers and fix a minor issue in the
     cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
     Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
     Yamada, Robert Jarzmik, Zumeng Chen).

   - Fix minor issues in the system suspend and hibernation core, in
     power management documentation and in the AVS (Adaptive Voltage
     Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael
     Wysocki).

   - Fix some issues in the cpupower utility and document that Shuah
     Khan is going to maintain it going forward (Prarit Bhargava, Shuah
     Khan)"

* tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits)
  tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
  tools/power/cpupower: Add 64 bit library detection
  intel_idle: Graceful probe failure when MWAIT is disabled
  cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
  freezer: Fix typo in freezable_schedule_timeout() comment
  PM / s2idle: Clear the events_check_enabled flag
  cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
  cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
  cpufreq: arm_big_little: make function arguments and structure pointer const
  cpuidle: Avoid assignment in if () argument
  cpuidle: Clean up cpuidle_enable_device() error handling a bit
  ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
  PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
  cpuidle: ladder: Add per CPU PM QoS resume latency support
  PM / QoS: Fix device resume latency framework
  PM / domains: Rework governor code to be more consistent
  PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
  soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
  soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
  ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
  ...
2017-11-13 19:43:50 -08:00
Linus Torvalds 2bcc673101 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Yet another big pile of changes:

   - More year 2038 work from Arnd slowly reaching the point where we
     need to think about the syscalls themself.

   - A new timer function which allows to conditionally (re)arm a timer
     only when it's either not running or the new expiry time is sooner
     than the armed expiry time. This allows to use a single timer for
     multiple timeout requirements w/o caring about the first expiry
     time at the call site.

   - A new NMI safe accessor to clock real time for the printk timestamp
     work. Can be used by tracing, perf as well if required.

   - A large number of timer setup conversions from Kees which got
     collected here because either maintainers requested so or they
     simply got ignored. As Kees pointed out already there are a few
     trivial merge conflicts and some redundant commits which was
     unavoidable due to the size of this conversion effort.

   - Avoid a redundant iteration in the timer wheel softirq processing.

   - Provide a mechanism to treat RTC implementations depending on their
     hardware properties, i.e. don't inflict the write at the 0.5
     seconds boundary which originates from the PC CMOS RTC to all RTCs.
     No functional change as drivers need to be updated separately.

   - The usual small updates to core code clocksource drivers. Nothing
     really exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  timers: Add a function to start/reduce a timer
  pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
  timer: Prepare to change all DEFINE_TIMER() callbacks
  netfilter: ipvs: Convert timers to use timer_setup()
  scsi: qla2xxx: Convert timers to use timer_setup()
  block/aoe: discover_timer: Convert timers to use timer_setup()
  ide: Convert timers to use timer_setup()
  drbd: Convert timers to use timer_setup()
  mailbox: Convert timers to use timer_setup()
  crypto: Convert timers to use timer_setup()
  drivers/pcmcia: omap1: Fix error in automated timer conversion
  ARM: footbridge: Fix typo in timer conversion
  drivers/sgi-xp: Convert timers to use timer_setup()
  drivers/pcmcia: Convert timers to use timer_setup()
  drivers/memstick: Convert timers to use timer_setup()
  drivers/macintosh: Convert timers to use timer_setup()
  hwrng/xgene-rng: Convert timers to use timer_setup()
  auxdisplay: Convert timers to use timer_setup()
  sparc/led: Convert timers to use timer_setup()
  mips: ip22/32: Convert timers to use timer_setup()
  ...
2017-11-13 17:56:58 -08:00
Rafael J. Wysocki 1efef68262 Merge branch 'pm-core'
* pm-core:
  ACPI / PM: Take SMART_SUSPEND driver flag into account
  PCI / PM: Take SMART_SUSPEND driver flag into account
  PCI / PM: Drop unnecessary invocations of pcibios_pm_ops callbacks
  PM / core: Add SMART_SUSPEND driver flag
  PCI / PM: Use the NEVER_SKIP driver flag
  PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  PM / core: Convert timers to use timer_setup()
  PM / core: Fix kerneldoc comments of four functions
  PM / core: Drop legacy class suspend/resume operations
2017-11-13 01:41:26 +01:00
Rafael J. Wysocki 794c33555f Merge branch 'acpi-pm'
* acpi-pm:
  ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
  ACPI / LPSS: Consolidate runtime PM and system sleep handling
  ACPI / PM: Combine device suspend routines
  ACPI / LPIT: Add Low Power Idle Table (LPIT) support
  ACPI / PM: Split code validating need for runtime resume in ->prepare()
  ACPI / PM: Restore acpi_subsys_complete()
  ACPI / PM: Combine two identical device resume routines
  ACPI / PM: Remove stale function header
2017-11-13 01:41:11 +01:00
Rafael J. Wysocki eb5fcc3134 Merge branches 'acpi-ec', 'acpi-button', 'acpi-sysfs', 'acpi-lpss' and 'acpi-cppc'
* acpi-ec:
  ACPI / EC: Fix regression related to triggering source of EC event handling

* acpi-button:
  ACPI / button: Delay acpi_lid_initialize_state() until first user space open

* acpi-sysfs:
  ACPI / sysfs: Make function param_set_trace_method_name() static

* acpi-lpss:
  ACPI / LPSS: Remove redundant initialization of clk

* acpi-cppc:
  ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs
  mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file
2017-11-13 01:37:55 +01:00
Rafael J. Wysocki 85595ada6c Merge branches 'acpi-pmic', 'acpi-apei' and 'acpi-x86'
* acpi-pmic:
  ACPI / PMIC: Add TI PMIC TPS68470 operation region driver

* acpi-apei:
  APEI / ERST: use 64-bit timestamps
  ACPI / APEI: Remove arch_apei_flush_tlb_one()
  arm64: mm: Remove arch_apei_flush_tlb_one()
  ACPI / APEI: Remove ghes_ioremap_area
  ACPI / APEI: Replace ioremap_page_range() with fixmap
  ACPI / APEI: remove the unused dead-code for SEA/NMI notification type
  ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq()

* acpi-x86:
  ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions
2017-11-13 01:37:17 +01:00
Rafael J. Wysocki 60764eb379 Merge branch 'acpica'
* acpica:
  ACPICA: Update version to 20170831
  ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read
  ACPICA: String conversions: Update to add new behaviors
  ACPICA: String conversions: Cleanup/format comments. No functional changes
  ACPICA: Restructure/cleanup all string-to-integer conversion functions
  ACPICA: Header support for the PDTT ACPI table
  ACPICA: acpiexec: Add testability of deferred table verification
  ACPICA: Hardware: Enable 64-bit support of hardware accesses
2017-11-13 01:36:58 +01:00
Rafael J. Wysocki 4762573b93 Merge branch 'pm-qos'
* pm-qos:
  PM / QoS: Fix device resume latency framework
  PM / QoS: Drop PM_QOS_FLAG_REMOTE_WAKEUP
2017-11-13 01:33:48 +01:00
Dan Williams 0e7f074145 acpi, nfit: validate commands against the device type
Fix occasions in acpi_nfit_ctl where we check the command type without
validating whether we are parsing dimm vs bus level commands. Where the
command numbers alias between dimms and bus we can make the wrong
assumption just checking the raw command number. For example, with a
simple nfit_test mock up of the clear-error command we trigger the
following:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000094
    IP: acpi_nfit_ctl+0x29b/0x930 [nfit]
    [..]
    Call Trace:
     nfit_test_probe+0xb85/0xc09 [nfit_test]
     platform_drv_probe+0x3b/0xa0
     ? platform_drv_probe+0x3b/0xa0
     driver_probe_device+0x29c/0x450
     ? test_alloc+0x180/0x180 [nfit_test]
     __driver_attach+0xe3/0xf0
     ? driver_probe_device+0x450/0x450
     bus_for_each_dev+0x73/0xc0
     driver_attach+0x1e/0x20
     bus_add_driver+0x173/0x270
     driver_register+0x60/0xe0
     __platform_driver_register+0x36/0x40
     nfit_test_init+0x2a1/0x1000 [nfit_test]

Fixes: 4b27db7e26 ("acpi, nfit: add support for the _LSI, _LSR, and...")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-12 15:18:57 -08:00
Gustavo A. R. Silva 1be9c3a0a0 ACPI: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-09 00:55:16 +01:00
Colin Ian King 71c50dbe1f ACPI / LPSS: Remove redundant initialization of clk
The pointer clk is being initialized to ERR_PTR(-ENODEV) however
this value is never read before it is set to clk_data->clk. Thus
the initialization is redundant and can be mored.

Cleans up clang warning:
Value stored to 'clk' during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-09 00:43:30 +01:00
George Cherian 85b1407bf6 ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs
Based on ACPI 6.2 Section 8.4.7.1.9 If the PCC register space is used,
all PCC registers, for all processors in the same performance domain
(as defined by _PSD), must be defined to be in the same subspace.

Based on Section 14.1 of ACPI specification, it is possible to have a
maximum of 256 PCC subspace IDs. Add support of multiple PCC subspace
ID instead of using a single global pcc_data structure.

While at that, fix the time_delta check in send_pcc_cmd() so that
last_mpar_reset and mpar_count are initialized properly.

Signed-off-by: George Cherian <george.cherian@cavium.com>
Reviewed-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-09 00:39:54 +01:00
Colin Ian King 3e87ead412 ACPI / sysfs: Make function param_set_trace_method_name() static
The function param_set_trace_method_name is local to the source and does
not need to be in global scope, so make it static.

Cleans up sparse warning:
symbol 'param_set_trace_method_name' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-09 00:35:41 +01:00
Hans de Goede 84d3f6b764 ACPI / button: Delay acpi_lid_initialize_state() until first user space open
ACPI _LID methods may depend on OpRegions and do not always handle
handlers for those OpRegions not being present properly e.g. :

            Method (_LID, 0, NotSerialized)  // _LID: Lid Status
            {
                If ((^^I2C5.PMI1.AVBL == One) && (^^GPO2.AVBL == One))
                {
                    Return (^^GPO2.LPOL) /* \_SB_.GPO2.LPOL */
                }
            }

Note the missing Return (1) when either of the OpRegions is not available,
this causes (in this case) a report of the lid-switch being closed,
which causes userspace to do an immediate suspend at boot.

This commit delays getting the initial state and thus calling _LID for
the first time until userspace opens the /dev/input/event# node. This
ensures that all drivers will have had a chance to load and registerer
their OpRegions before the first _LID call, fixing this issue.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-09 00:30:44 +01:00
Lv Zheng 53c5eaabae ACPI / EC: Fix regression related to triggering source of EC event handling
Originally the Samsung quirks removed by commit 4c237371 can be covered
by commit e923e8e7 and ec_freeze_events=Y mode. But commit 9c40f956
changed ec_freeze_events=Y back to N, making this problem re-surface.

Actually, if commit e923e8e7 is robust enough, we can freely change
ec_freeze_events mode, so this patch fixes the issue by improving
commit e923e8e7.

Related commits listed in the merged order:

 Commit: e923e8e79e
 Subject: ACPI / EC: Fix an issue that SCI_EVT cannot be detected
          after event is enabled

 Commit: 4c237371f2
 Subject: ACPI / EC: Remove old CLEAR_ON_RESUME quirk

 Commit: 9c40f956ce
 Subject: Revert "ACPI / EC: Enable event freeze mode..." to fix
          a regression

This patch not only fixes the reported post-resume EC event triggering
source issue, but also fixes an unreported similar issue related to the
driver bind by adding EC event triggering source in ec_install_handlers().

Fixes: e923e8e79e (ACPI / EC: Fix an issue that SCI_EVT cannot be detected after event is enabled)
Fixes: 4c237371f2 (ACPI / EC: Remove old CLEAR_ON_RESUME quirk)
Fixes: 9c40f956ce (Revert "ACPI / EC: Enable event freeze mode..." to fix a regression)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196833
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reported-by: Alistair Hamilton <ahpatent@gmail.com>
Tested-by: Alistair Hamilton <ahpatent@gmail.com>
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-09 00:23:53 +01:00
Arnd Bergmann c0041d40ba APEI / ERST: use 64-bit timestamps
32-bit timestamps are deprecated in the kernel, so we should not use
get_seconds(). In this case, the 'struct cper_record_header' structure
already contains a 64-bit field, so the only required change is to use
the safe ktime_get_real_seconds() interface as a replacement.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-09 00:13:39 +01:00
Ville Syrjälä ff1656790b ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
acpi_remove_pm_notifier() ends up calling flush_workqueue() while
holding acpi_pm_notifier_lock, and that same lock is taken by
by the work via acpi_pm_notify_handler(). This can deadlock.

To fix the problem let's split the single lock into two: one to
protect the dev->wakeup between the work vs. add/remove, and
another one to handle notifier installation vs. removal.

After commit a1d14934ea "workqueue/lockdep: 'Fix' flush_work()
annotation" I was able to kill the machine (Intel Braswell)
very easily with 'powertop --auto-tune', runtime suspending i915,
and trying to wake it up via the USB keyboard. The cases when
it didn't die are presumably explained by lockdep getting disabled
by something else (cpu hotplug locking issues usually).

Fortunately I still got a lockdep report over netconsole
(trickling in very slowly), even though the machine was
otherwise practically dead:

[  112.179806] ======================================================
[  114.670858] WARNING: possible circular locking dependency detected
[  117.155663] 4.13.0-rc6-bsw-bisect-00169-ga1d14934ea4b #119 Not tainted
[  119.658101] ------------------------------------------------------
[  121.310242] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[  121.313294] xhci_hcd 0000:00:14.0: xHCI host controller not responding, assume dead
[  121.313346] xhci_hcd 0000:00:14.0: HC died; cleaning up
[  121.313485] usb 1-6: USB disconnect, device number 3
[  121.313501] usb 1-6.2: USB disconnect, device number 4
[  134.747383] kworker/0:2/47 is trying to acquire lock:
[  137.220790]  (acpi_pm_notifier_lock){+.+.}, at: [<ffffffff813cafdf>] acpi_pm_notify_handler+0x2f/0x80
[  139.721524]
[  139.721524] but task is already holding lock:
[  144.672922]  ((&dpc->work)){+.+.}, at: [<ffffffff8109ce90>] process_one_work+0x160/0x720
[  147.184450]
[  147.184450] which lock already depends on the new lock.
[  147.184450]
[  154.604711]
[  154.604711] the existing dependency chain (in reverse order) is:
[  159.447888]
[  159.447888] -> #2 ((&dpc->work)){+.+.}:
[  164.183486]        __lock_acquire+0x1255/0x13f0
[  166.504313]        lock_acquire+0xb5/0x210
[  168.778973]        process_one_work+0x1b9/0x720
[  171.030316]        worker_thread+0x4c/0x440
[  173.257184]        kthread+0x154/0x190
[  175.456143]        ret_from_fork+0x27/0x40
[  177.624348]
[  177.624348] -> #1 ("kacpi_notify"){+.+.}:
[  181.850351]        __lock_acquire+0x1255/0x13f0
[  183.941695]        lock_acquire+0xb5/0x210
[  186.046115]        flush_workqueue+0xdd/0x510
[  190.408153]        acpi_os_wait_events_complete+0x31/0x40
[  192.625303]        acpi_remove_notify_handler+0x133/0x188
[  194.820829]        acpi_remove_pm_notifier+0x56/0x90
[  196.989068]        acpi_dev_pm_detach+0x5f/0xa0
[  199.145866]        dev_pm_domain_detach+0x27/0x30
[  201.285614]        i2c_device_probe+0x100/0x210
[  203.411118]        driver_probe_device+0x23e/0x310
[  205.522425]        __driver_attach+0xa3/0xb0
[  207.634268]        bus_for_each_dev+0x69/0xa0
[  209.714797]        driver_attach+0x1e/0x20
[  211.778258]        bus_add_driver+0x1bc/0x230
[  213.837162]        driver_register+0x60/0xe0
[  215.868162]        i2c_register_driver+0x42/0x70
[  217.869551]        0xffffffffa0172017
[  219.863009]        do_one_initcall+0x45/0x170
[  221.843863]        do_init_module+0x5f/0x204
[  223.817915]        load_module+0x225b/0x29b0
[  225.757234]        SyS_finit_module+0xc6/0xd0
[  227.661851]        do_syscall_64+0x5c/0x120
[  229.536819]        return_from_SYSCALL_64+0x0/0x7a
[  231.392444]
[  231.392444] -> #0 (acpi_pm_notifier_lock){+.+.}:
[  235.124914]        check_prev_add+0x44e/0x8a0
[  237.024795]        __lock_acquire+0x1255/0x13f0
[  238.937351]        lock_acquire+0xb5/0x210
[  240.840799]        __mutex_lock+0x75/0x940
[  242.709517]        mutex_lock_nested+0x1c/0x20
[  244.551478]        acpi_pm_notify_handler+0x2f/0x80
[  246.382052]        acpi_ev_notify_dispatch+0x44/0x5c
[  248.194412]        acpi_os_execute_deferred+0x14/0x30
[  250.003925]        process_one_work+0x1ec/0x720
[  251.803191]        worker_thread+0x4c/0x440
[  253.605307]        kthread+0x154/0x190
[  255.387498]        ret_from_fork+0x27/0x40
[  257.153175]
[  257.153175] other info that might help us debug this:
[  257.153175]
[  262.324392] Chain exists of:
[  262.324392]   acpi_pm_notifier_lock --> "kacpi_notify" --> (&dpc->work)
[  262.324392]
[  267.391997]  Possible unsafe locking scenario:
[  267.391997]
[  270.758262]        CPU0                    CPU1
[  272.431713]        ----                    ----
[  274.060756]   lock((&dpc->work));
[  275.646532]                                lock("kacpi_notify");
[  277.260772]                                lock((&dpc->work));
[  278.839146]   lock(acpi_pm_notifier_lock);
[  280.391902]
[  280.391902]  *** DEADLOCK ***
[  280.391902]
[  284.986385] 2 locks held by kworker/0:2/47:
[  286.524895]  #0:  ("kacpi_notify"){+.+.}, at: [<ffffffff8109ce90>] process_one_work+0x160/0x720
[  288.112927]  #1:  ((&dpc->work)){+.+.}, at: [<ffffffff8109ce90>] process_one_work+0x160/0x720
[  289.727725]

Fixes: c072530f39 (ACPI / PM: Revork the handling of ACPI device wakeup notifications)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: 3.17+ <stable@vger.kernel.org> # 3.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-08 23:02:43 +01:00
James Morse 520e18a508 ACPI / APEI: Remove ghes_ioremap_area
Now that nothing is using the ghes_ioremap_area pages, rip them out.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
2017-11-07 12:13:21 +01:00
James Morse 4f89fa286f ACPI / APEI: Replace ioremap_page_range() with fixmap
Replace ghes_io{re,un}map_pfn_{nmi,irq}()s use of ioremap_page_range()
with __set_fixmap() as ioremap_page_range() may sleep to allocate a new
level of page-table, even if its passed an existing final-address to
use in the mapping.

The GHES driver can only be enabled for architectures that select
HAVE_ACPI_APEI: Add fixmap entries to both x86 and arm64.

clear_fixmap() does the TLB invalidation in __set_fixmap() for arm64
and __set_pte_vaddr() for x86. In each case its the same as the
respective arch_apei_flush_tlb_one().

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Tested-by: Toshi Kani <toshi.kani@hpe.com>
[ For the arm64 bits: ]
Acked-by: Will Deacon <will.deacon@arm.com>
[ For the x86 bits: ]
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
2017-11-07 12:12:44 +01:00
Rafael J. Wysocki 71630b7a83 ACPI / PM: Blacklist Low Power S0 Idle _DSM for Dell XPS13 9360
At least one Dell XPS13 9360 is reported to have serious issues with
the Low Power S0 Idle _DSM interface and since this machine model
generally can do ACPI S3 just fine, add a blacklist entry to disable
that interface for Dell XPS13 9360.

Fixes: 8110dd281e (ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196907
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
2017-11-06 23:56:57 +01:00
Rafael J. Wysocki 05087360fd ACPI / PM: Take SMART_SUSPEND driver flag into account
Make the ACPI PM domain take DPM_FLAG_SMART_SUSPEND into account in
its system suspend callbacks.

[Note that the pm_runtime_suspended() check in acpi_dev_needs_resume()
is an optimization, because if is not passed, all of the subsequent
checks may be skipped and some of them are much more overhead in
general.]

Also use the observation that if the device is in runtime suspend
at the beginning of the "late" phase of a system-wide suspend-like
transition, its state cannot change going forward (runtime PM is
disabled for it at that time) until the transition is over and the
subsequent system-wide PM callbacks should be skipped for it (as
they generally assume the device to not be suspended), so add
checks for that in acpi_subsys_suspend_late/noirq() and
acpi_subsys_freeze_late/noirq().

Moreover, if acpi_subsys_resume_noirq() is called during the
subsequent system-wide resume transition and if the device was left
in runtime suspend previously, its runtime PM status needs to be
changed to "active" as it is going to be put into the full-power
state going forward, so add a check for that too in there.

In turn, if acpi_subsys_thaw_noirq() runs after the device has been
left in runtime suspend, the subsequent "thaw" callbacks need
to be skipped for it (as they may not work correctly with a
suspended device), so set the power.direct_complete flag for the
device then to make the PM core skip those callbacks.

On top of the above, make the analogous changes in the acpi_lpss
driver that uses the ACPI PM domain callbacks.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06 13:57:47 +01:00
Rafael J. Wysocki 08810a4119 PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
The motivation for this change is to provide a way to work around
a problem with the direct-complete mechanism used for avoiding
system suspend/resume handling for devices in runtime suspend.

The problem is that some middle layer code (the PCI bus type and
the ACPI PM domain in particular) returns positive values from its
system suspend ->prepare callbacks regardless of whether the driver's
->prepare returns a positive value or 0, which effectively prevents
drivers from being able to control the direct-complete feature.
Some drivers need that control, however, and the PCI bus type has
grown its own flag to deal with this issue, but since it is not
limited to PCI, it is better to address it by adding driver flags at
the core level.

To that end, add a driver_flags field to struct dev_pm_info for flags
that can be set by device drivers at the probe time to inform the PM
core and/or bus types, PM domains and so on on the capabilities and/or
preferences of device drivers.  Also add two static inline helpers
for setting that field and testing it against a given set of flags
and make the driver core clear it automatically on driver remove
and probe failures.

Define and document two PM driver flags related to the direct-
complete feature: NEVER_SKIP and SMART_PREPARE that can be used,
respectively, to indicate to the PM core that the direct-complete
mechanism should never be used for the device and to inform the
middle layer code (bus types, PM domains etc) that it can only
request the PM core to use the direct-complete mechanism for
the device (by returning a positive value from its ->prepare
callback) if it also has been requested by the driver.

While at it, make the core check pm_runtime_suspended() when
setting power.direct_complete so that it doesn't need to be
checked by ->prepare callbacks.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-06 13:55:30 +01:00
Linus Torvalds 9b3499d752 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
 "Two fixes:

   - A PCID related revert that fixes power management and performance
     regressions.

   - The module loader robustization and sanity check commit is rather
     fresh, but it looked like a good idea to apply because of the
     hidden data corruption problem such invalid modules could cause"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/module: Detect and skip invalid relocations
  Revert "x86/mm: Stop calling leave_mm() in idle code"
2017-11-05 12:14:50 -08:00
Andy Lutomirski 675357362a Revert "x86/mm: Stop calling leave_mm() in idle code"
This reverts commit 43858b4f25.

The reason I removed the leave_mm() calls in question is because the
heuristic wasn't needed after that patch.  With the original version
of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running
kernel thread) due a flush on the loaded mm.

Unfortunately, that caused architectural issues, so now I've
reinstated these flushes on non-PCID systems in:

    commit b956575bed ("x86/mm: Flush more aggressively in lazy TLB mode").

That, in turn, gives us a power management and occasionally
performance regression as compared to old kernels: a process that
goes into a deep idle state on a given CPU and gets its mm flushed
due to activity on a different CPU will wake the idle CPU.

Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an
intel_idle state that is likely to cause a TLB flush gets its mm
switched to init_mm before going idle.

FWIW, this heuristic is lousy.  Whether we should change CR3 before
idle isn't a good hint except insofar as the performance hit is a bit
lower if the TLB is getting flushed by the idle code anyway.  What we
really want to know is whether we anticipate being idle long enough
that the mm is likely to be flushed before we wake up.  This is more a
matter of the expected latency than the idle state that gets chosen.
This heuristic also completely fails on systems that don't know
whether the TLB will be flushed (e.g. AMD systems?).  OTOH it may be a
bit obsolete anyway -- PCID systems don't presently benefit from this
heuristic at all.

We also shouldn't do this callback from innermost bit of the idle code
due to the RCU nastiness it causes.  All the information need is
available before rcu_idle_enter() needs to happen.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 43858b4f25 "x86/mm: Stop calling leave_mm() in idle code"
Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04 15:01:50 +01:00
Kees Cook d5272003b8 ACPI / APEI: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tyler Baicar <tbaicar@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: "Jonathan (Zhixiong) Zhang" <zjzhang@codeaurora.org>
Cc: Shiju Jose <shiju.jose@huawei.com>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
2017-11-02 15:50:14 -07:00
Dave Jiang aa9ad44a42 libnvdimm: move poison list functions to a new 'badrange' file
nfit_test needs to use the poison list manipulation code as well. Make
it more generic and in the process rename poison to badrange, and move
all the related helpers to a new file.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[vishal: Add badrange.o to nfit_test's Kbuild]
[vishal: add a missed include in bus.c for the new badrange functions]
[vishal: rename all instances of 'be' to 'bre']
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-02 10:42:30 -07:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Kees Cook e4dca7b7aa treewide: Fix function prototypes for module_param_call()
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:

@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@

 module_param_call(_name, _set_func, _get_func, _arg, _mode);

@fix_set_prototype
 depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@

 int _set_func(
-_val_type _val
+const char * _val
 ,
-_param_type _param
+const struct kernel_param * _param
 ) { ... }

@fix_get_prototype
 depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@

 int _get_func(
-_val_type _val
+char * _val
 ,
-_param_type _param
+const struct kernel_param * _param
 ) { ... }

Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:

	drivers/platform/x86/thinkpad_acpi.c
	fs/lockd/svc.c

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-10-31 15:30:37 +01:00
Dan Williams 11e1427016 acpi, nfit: add support for NVDIMM_FAMILY_INTEL v1.6 DSMs
Per v1.6 of the NVDIMM_FAMILY_INTEL command set [1] some of the new
commands require rev-id 2. In addition to enabling ND_CMD_CALL for these
new function numbers, add a lookup table for revision-ids by family
and function number.

[1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.6.pdf

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-30 11:22:32 -07:00
Dan Williams b9b1504d3c acpi, nfit: hide unknown commands from nmemX/commands
For vendor specific commands that do not have a common kernel
translation, hide them from nmemX/commands. For example, the following
results from new enabling to probe for support of the new
NVDIMM_FAMILY_INTEL DSMs specified in v1.6 of the command specification
[1]:

    # cat /sys/bus/nd/devices/nmem0/commands
    smart smart_thresh flags get_size get_data set_data effect_size
    effect_log vendor cmd_call unknown unknown unknown unknown unknown
    unknown unknown unknown

[1]: https://pmem.io/documents/NVDIMM_DSM_Interface-V1.6.pdf

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-29 12:13:07 -07:00
Wolfram Sang 3990bedea6 Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-4.15
This cycle has been real quiet for me. There's only the one trivial
patch that somewhat simplifies DT parsing in the i2c-mux-reg driver.
2017-10-26 22:24:15 +02:00
Rafael J. Wysocki a192aa923b ACPI / LPSS: Consolidate runtime PM and system sleep handling
Move the LPSS-specific code from acpi_lpss_runtime_suspend()
and acpi_lpss_runtime_resume() into separate functions,
acpi_lpss_suspend() and acpi_lpss_resume(), respectively, and
make acpi_lpss_suspend_late() and acpi_lpss_resume_early() use
them too in order to unify the runtime PM and system sleep
handling in the LPSS driver.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-24 13:27:45 +02:00
Dongjiu Geng c49870e89f ACPI / APEI: remove the unused dead-code for SEA/NMI notification type
For the SEA notification, the two functions ghes_sea_add() and
ghes_sea_remove() are only called when CONFIG_ACPI_APEI_SEA
is defined. If not, it will return errors in the ghes_probe()
and not continue. If the probe is failed, the ghes_sea_remove()
also has no chance to be called. Hence, remove the unnecessary
handling when CONFIG_ACPI_APEI_SEA is not defined.

For the NMI notification, it has the same issue as SEA notification,
so also remove the unused dead-code for it.

Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-23 13:05:21 +02:00