Commit Graph

24 Commits

Author SHA1 Message Date
Fabio Estevam ecccab3c5f ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source
On the mx53qsb board with mc34708 PMIC, GPIO1_8 resets the system, so better not
to use it as a wakeup source.

Use GPIO 2_14 and 2_15 for wakeup sources instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-06 19:53:22 +08:00
Fabio Estevam 71686dda2b ARM: dts: imx53-qsb: SDHC1 does not have cd-gpios
SDHC1 does not have any GPIO for reading the card detection status, so
remove 'cd-gpios'.

After this change card detection works via the internal SD controller mechanism.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-06 19:53:16 +08:00
Fabio Estevam 8d4a54af47 ARM: dts: imx53-qsb: SDHC3 is connected in 8-bit mode
SDHC3 is 8 bit-wide, so pass the bus-width property to reflect that.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-06 19:53:09 +08:00
Fabio Estevam d39a5834dc ARM: dts: imx53-qsb: Allow usb peripheral mode to work
Trying to use the usb otg port on mx53qsb results in the following error:

$ modprobe g_ether
using random self ethernet address
using random host ethernet address
usb0: HOST MAC 52:0f:8a:1e:aa:09
usb0: MAC de:f3:70:d8:6c:62
using random self ethernet address
using random host ethernet address
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready

(Connect the USB cable)

$ ci_hdrc ci_hdrc.0: remove, state 4
usb usb1: USB disconnect, device number 1
ci_hdrc ci_hdrc.0: USB bus 1 deregistered
ci_hdrc ci_hdrc.0: timeout waiting for 00000800 in 11

USB otg port goes to connector J3 (mini USB) and also to the USB combo (J2).

As mx53qsb does not provide a USB ID pin, pass the dr_mode as 'peripheral' so
that we can have usb device working.

Tested via g_ether.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-09-26 13:01:32 +08:00
Fabio Estevam c574fa93af ARM: dts: imx53-qsb: Make USBH1 functional
mx53qsb uses GPIO7_8 to turn on VBUS, so add support for it.

Also specify the PHY type in the device tree.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:29:51 +08:00
Fabio Estevam fbf970f61e ARM: dts: mx53qsb: Enable VPU support
Enable Video Processing Unit (VPU) support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-22 23:28:48 +08:00
Rogerio Pimentel c268947aa6 ARM: dts: mx53qsb: Add support for parallel display
Add support for CLAA WVGA display for i.MX53 QSB.

Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:22 +08:00
Shawn Guo 59d5c0ce8a ARM: imx: move imx53-qsb audio codec clk lookup into DT
With device tree clk lookup support in place, we can move audio codec
clk lookup for ssi_ext1 into device tree now, so that imx53_qsb_init()
can be saved.

Since ssi_ext2 lookup is used nowhere, it gets removed together with
ssi_ext1 lookup from clk driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:15 +08:00
Michael Grzeschik 502d26a26a ARM: dts: imx: imx53-qsb.dts: enable usbotg and usbh1
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:12 +08:00
Shawn Guo e16415313c pinctrl: imx: move hard-coding data into device tree
Currently, all imx pinctrl drivers maintain a big array of struct
imx_pin_reg which hard-codes data like register offset and mux mode
setting for each pin function.  Every time a new imx SoC support is
added, we need to add such a big mount of data.  With moving to single
kernel build, it's only matter of time to be blamed on memory consuming.

With DTC pre-processor support in place, the patch moves all these data
into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and
changing the PIN_FUNC_ID parsing code a little bit.

The pin id gets re-numbered based on mux register offset, or config
register offset if the pin has no mux register, so that kernel can
identify the pin id from register offsets provided by device tree.

As a bonus point of the change, those arbitrary magic numbers standing
for particular PIN_FUNC_ID in device tree sources are now replaced by
macros to improve the readability of dts files.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09 22:52:50 +08:00
Shawn Guo 36dffd8f49 ARM: imx: use #include for all device trees
Replace /include/ (dtc) with #include (C pre-processor) for all imx DT
files, so that gcc -E handles the entire include tree, and hence any of
those files can #include some other file e.g. for constant definitions.

This allows future use of #defines and header files in order to define
names for various constants, such as pinctrl settings. Use of those
features will increase the readability of the device tree files.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-09 22:52:49 +08:00
Shawn Guo be4ccfcec3 ARM: dts: imx: use nodes label in board dts
Following omap3-evm.dts way, it changes all imx dts files to use label
in board dts to refer to nodes defined by soc dtsi.  Thus, the board
dts files become easier to read and edit with the least indentation
levels.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-10 23:25:42 +08:00
Fabio Estevam 2a32467135 ARM: dts: imx53-qsb: Make DA9053 regulator functional
Setup the GPIO7_11 pin as interrupt to the DA9053 and also rename the regulator nodes
so that they match with the datasheet.

This allows probing of DA9053 to succeed.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:52 +08:00
Fabio Estevam e9dc615c50 ARM: dts: imx53-qsb: Use pinctrl for gpio-led
Since commit 8fe4554f (leds: leds-gpio: adopt pinctrl support) gpio-led driver
has pinctrl support, so setup the gpio led pin via pinctrl and avoid the
following warning:

leds-gpio leds.2: pins are not configured from the driver

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-16 14:18:51 +08:00
Shawn Guo 5be03a7bdb ARM: dts: imx53-qsb: add pinctrl settings
Add pinctrl settings for existing devices in imx53-qsb.dts.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-11 16:26:50 +08:00
Fabio Estevam 7e4f03657d ARM: dts: imx: Move SDMA firmware to SoC dtsi file
Instead of adding sdma-ram-script-name into each board dts file, move
it to the SoC dtsi file instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-24 11:44:11 +08:00
Fabio Estevam 03b2765054 ARM: dts: imx: Always enable the watchdog
Instead of enabling the watchdog in each individual dts file, select in
the SoC dtsi file instead.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-08-24 11:44:11 +08:00
Shawn Guo ffc505c0b9 ARM: dts: imx53-qsb: enable audio support
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 17:21:24 +08:00
Ying-Chun Liu (PaulLiu) 41a0d3aa50 ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support
Add Dialog DA9053 regulators support for imx53-qsb (Loco board)

Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Amit Kucheria <amit.kucheria@canonical.com>
Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:18:09 +08:00
Shawn Guo 0c456cfa7e ARM: imx: rename uart and fec device tree nodes
It has been pointed out by device tree maintainer for several times
that the generic names 'serial' and 'ethernet' should be used for
those devices per ePAPR.  Renames imx uart and fec device tree nodes
to stop them being bad examples.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-11 15:08:24 +08:00
Fabio Estevam 4592a96591 ARM: dts: imx: Remove bootargs field
Remove bootargs field as this information is retrieved from the bootloader.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-11 15:08:19 +08:00
Richard Zhao 8f9ffecfa9 dts/imx: rename uart labels to consistent with hw spec
UART1/UART2/... is more readable than UART0/UART1/... .
Remove redundant UART comments.

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 21:25:44 +08:00
Richard Zhao 4d191868a6 dts/imx: rename gpio labels to consistent with hw spec
GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... .
Remove redundant gpio comments.

Signed-off-by: Richard Zhao <richard.zhao@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-14 21:25:43 +08:00
Shawn Guo 73d2b4cdfc arm/mx5: add device tree support for imx53 boards
It adds device tree support for imx53 boards.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-18 12:42:57 +02:00