Commit Graph

667 Commits

Author SHA1 Message Date
Matthew Garrett 38ac0f1b90 ACPI: Add _PLD support
Add a simple helper function to allow drivers to obtain the physical
device location data.

Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 17:03:12 -07:00
Matthew Garrett 66886d6f8c ACPI: Add stubs for (un)register_acpi_bus_type
It's unreasonable to have CONFIG_ACPI for these in drivers, so add some
stub functions.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-11 17:03:12 -07:00
Linus Torvalds 59068e369b Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull an ACPI patch from Len Brown:
 "It fixes a D3 issue new in 3.4-rc1."

By Lin Ming via Len Brown:
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  ACPI: Fix D3hot v D3cold confusion
2012-05-05 10:06:06 -07:00
Lin Ming 1cc0c998fd ACPI: Fix D3hot v D3cold confusion
Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot
in some places, but D3cold in other places.

After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD;
and all references to D3hot use ACPI_STATE_D3_HOT.

ACPI's _PR3 method is used to enter both D3hot and D3cold states.
What distinguishes D3hot from D3cold is the presence _PR3
(Power Resources for D3hot)  If these resources are all ON,
then the state is D3hot.  If _PR3 is not present,
or all _PR0 resources for the devices are OFF,
then the state is D3cold.

This patch applies after Linux-3.4-rc1.
A future syntax cleanup may remove ACPI_STATE_D3
to emphasize that it always means ACPI_STATE_D3_COLD.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-05-05 01:19:52 -04:00
Linus Torvalds a335750b9a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI & Power Management changes from Len Brown:
 - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup
 - cpuidle evolving, more ARM use
 - thermal sub-system evolving, ditto
 - assorted other PM bits

Fix up conflicts in various cpuidle implementations due to ARM cpuidle
cleanups (ARM at91 self-refresh and cpu idle code rewritten into
"standby" in asm conflicting with the consolidation of cpuidle time
keeping), trivial SH include file context conflict and RCU tracing fixes
in generic code.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits)
  ACPI throttling: fix endian bug in acpi_read_throttling_status()
  Disable MCP limit exceeded messages from Intel IPS driver
  ACPI video: Don't start video device until its associated input device has been allocated
  ACPI video: Harden video bus adding.
  ACPI: Add support for exposing BGRT data
  ACPI: export acpi_kobj
  ACPI: Fix logic for removing mappings in 'acpi_unmap'
  CPER failed to handle generic error records with multiple sections
  ACPI: Clean redundant codes in scan.c
  ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed()
  ACPI: consistently use should_use_kmap()
  PNPACPI: Fix device ref leaking in acpi_pnp_match
  ACPI: Fix use-after-free in acpi_map_lsapic
  ACPI: processor_driver: add missing kfree
  ACPI, APEI: Fix incorrect APEI register bit width check and usage
  Update documentation for parameter *notrigger* in einj.txt
  ACPI, APEI, EINJ, new parameter to control trigger action
  ACPI, APEI, EINJ, limit the range of einj_param
  ACPI, APEI, Fix ERST header length check
  cpuidle: power_usage should be declared signed integer
  ...
2012-03-30 16:45:39 -07:00
Len Brown d326f44e5f Merge branch 'tboot' into release
Conflicts:
	drivers/acpi/acpica/hwsleep.c

Text conflict between:

2feec47d4c
(ACPICA: ACPI 5: Support for new FADT SleepStatus, SleepControl registers)

which removed #include "actables.h"

and

09f98a825a
(x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep.)

which removed #include <linux/tboot.h>

The resolution is to remove them both.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 16:38:59 -04:00
Len Brown ec612fcf43 Merge branch 'd3' into release
Conflicts:
	drivers/acpi/sleep.c

This was a text conflict between
a2ef5c4fd4
(ACPI: Move module parameter gts and bfs to sleep.c)

which added #include <linux/module.h>

and

b24e509885
(ACPI, PCI: Move acpi_dev_run_wake() to ACPI core)

which added #include <linux/pm_runtime.h>

The resolution was to take them both.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 16:21:26 -04:00
Lin Ming b24e509885 ACPI, PCI: Move acpi_dev_run_wake() to ACPI core
acpi_dev_run_wake() is a generic function which can be used by
other subsystem too. Rename it to acpi_pm_device_run_wake, to be
consistent with acpi_pm_device_sleep_wake.

Then move it to ACPI core.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 02:21:18 -04:00
Lin Ming 0090def6c3 ACPI: Add interface to register/unregister device to/from power resources
Devices may share same list of power resources in _PR0, for example

Device(Dev0)
{
	Name (_PR0, Package (0x01)
	{
		P0PR,
		P1PR
	})
}

Device(Dev1)
{
	Name (_PR0, Package (0x01)
	{
		P0PR,
		P1PR
	}
}

Assume Dev0 and Dev1 were runtime suspended.
Then Dev0 is resumed first and it goes into D0 state.
But Dev1 is left in D0_Uninitialised state.

This is wrong. In this case, Dev1 must be resumed too.

In order to hand this case, each power resource maintains a list of
devices which relies on it.

When power resource is ON, it will check if the devices on its list
can be resumed. The device can only be resumed when all the power
resouces of its _PR0 are ON.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 01:47:20 -04:00
Bob Moore 5aa3c16c6b ACPICA: Update to version 20120320
Version 20120320.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 01:45:14 -04:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Lin Ming 8a73b17e4c ACPICA: Sleep/Wake interfaces: optionally execute _GTS and _BFS
Enhanced the sleep/wake interfaces to optionally execute the
_GTS method (Going To Sleep), and the _BFS method (Back From
Sleep).  Windows apparently does not execute these methods, and
therefore these methods are often untested. It has been seen on
some systems where the execution of these methods causes errors
and also prevents the machine from entering S5. It is therefore
suggested that host operating systems do not execute these methods
by default. In the future, perhaps these methods can be optionally
executed based on the age of the system and/or what is the newest
version of Windows that the BIOS asks for via _OSI.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-26 21:16:25 -04:00
Bob Moore 4efeeecd88 ACPICA: Clarify METHOD_NAME* defines for full-pathname cases
Changed the METHOD_NAME* defines that define a full pathname to
the method to METHOD_PATHNAME* in order to make it clear that
it is not a simple 4-character ACPI name. Used for the various
sleep/wake methods.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:45:53 -04:00
Bob Moore dd0228e922 ACPICA: Update to version 20120215
Version 20120215.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:45:07 -04:00
Bob Moore 72a8887a35 ACPICA: Add table-driven dispatch for sleep/wake functions
Simplifies the code, especially the compile-time
ACPI_REDUCED_HARDWARE option.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:45:05 -04:00
Bob Moore f7b004a17c ACPICA: Add acpi_os_physical_table_override interface
This interface allows the host to override a table via a
physical address, instead of the logical address required by
acpi_os_table_override. This simplifies the host implementation.
Initial implementation by Thomas Renninger. ACPICA implementation
creates a single function for table overrides that attempts both
a logical and a physical override.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:59 -04:00
Bob Moore ea143604c5 ACPICA: ACPI 5: Update debug output for new notify values
Add new notify values, add support for "hardware specific" notifies.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:57 -04:00
Bob Moore 653f4b538f ACPICA: Expand OSL memory read/write interfaces to 64 bits
This change expands acpi_os_read_memory and acpi_os_write_memory to a
full 64 bits. This allows 64 bit transfers via the acpi_read and
acpi_write interfaces. Note: The internal acpi_hw_read and acpi_hw_write
interfaces remain at 32 bits, because 64 bits is not needed to
access the standard ACPI registers.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:54 -04:00
Bob Moore 33620c5419 ACPICA: Support for custom ACPICA build for ACPI 5 reduced hardware
Add ACPI_REDUCED_HARDWARE flag that removes all hardware-related
code (about 10% code, 5% static data).

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:49 -04:00
Bob Moore d08310fe0d ACPICA: Move ACPI timer prototypes to public acpixf file
These prototypes were incorrectly declared in achware.h.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:38 -04:00
Bob Moore 2feec47d4c ACPICA: ACPI 5: Support for new FADT SleepStatus, SleepControl registers
Adds sleep and wake support for systems with these registers.
One new file, hwxfsleep.c

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:34 -04:00
Len Brown e840dfe334 Merge branch 'stable/for-x86-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into tboot 2012-03-22 01:31:09 -04:00
Tang Liang 09f98a825a x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep.
The ACPI suspend path makes a call to tboot_sleep right before
it writes the PM1A, PM1B values. We replace the direct call to
tboot via an registration callback similar to __acpi_register_gsi.

CC: Len Brown <len.brown@intel.com>
Acked-by: Joseph Cihula <joseph.cihula@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
[v1: Added __attribute__ ((unused))]
[v2: Introduced a wrapper instead of changing tboot_sleep return values]
[v3: Added return value AE_CTRL_SKIP for acpi_os_sleep_prepare]
Signed-off-by: Tang Liang <liang.tang@oracle.com>
[v1: Fix compile issues on IA64 and PPC64]
[v2: Fix where __acpi_os_prepare_sleep==NULL and did not go in sleep properly]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-13 14:06:33 -04:00
Greg Kroah-Hartman bd1d462e13 Merge 3.3-rc2 into the driver-core-next branch.
This was done to resolve a merge and build problem with the
drivers/acpi/processor_driver.c file.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02 11:24:44 -08:00
Andi Kleen 9061e0e167 ACPI: Load acpi-cpufreq from processor driver automatically
The only left over hole in automatic cpufreq driver loading was the loading
of ACPI cpufreq. This driver should be loaded when ACPI supports a _PDC
method and the CPU vendor wants to use acpi cpufreq.

Simply add a request module call to the acpi processor core driver
when this is true. This seems like the simplest solution for this.

Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26 16:48:12 -08:00
Len Brown eb7004e623 Merge branches 'atomicio-apei', 'hotplug', 'sony-nvs-nosave' and 'thermal-netlink' into release 2012-01-23 19:47:06 -05:00
Myron Stowe 1001a3a307 ACPI: Remove ./drivers/acpi/atomicio.[ch]
With the conversion of atomicio's routines in place (see commits
6f68c91c55 and 700130b41f), atomicio.[ch] can be removed, replacing
the APEI specific pre-mapping capabilities with the more generalized
versions that drivers/acpi/osl.c provides.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-21 01:09:00 -05:00
Myron Stowe e615bf5b55 ACPI, APEI: Add 64-bit read/write support for APEI on i386
Base ACPI (CA) currently does not support atomic 64-bit reads and writes
(acpi_read() and acpi_write() split 64-bit loads/stores into two
32-bit transfers) yet APEI expects 64-bit transfer capability, even
when running on 32-bit systems.

This patch implements 64-bit read and write routines for APEI usage.

This patch re-factors similar functionality introduced in commit
04c25997c9, bringing it into the ACPI subsystem in preparation for
removing ./drivers/acpi/atomicio.[ch].  In the implementation I have
replicated acpi_os_read_memory() and acpi_os_write_memory(), creating
64-bit versions for APEI to utilize, as opposed to something more
elegant.  My thinking is that we should attempt to see if we can get
ACPI's CA/OSL changed so that the existing acpi_read() and acpi_write()
interfaces are natively 64-bit capable and then subsequently remove the
replication.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-21 01:08:17 -05:00
Thomas Renninger 99b7250844 ACPI processor hotplug: Delay acpi_processor_start() call for hotplugged cores
Delay the setting up of features (cpuidle, throttling by calling
acpi_processor_start()) to the time when the hotplugged
core got onlined the first time and got fully
initialized.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-19 21:26:32 -05:00
Linus Torvalds 507a03c1cb Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.

APEI has patches resulting from testing on real hardware.

Plus other random fixes.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  ACPI processor: Remove unneeded cpuidle_unregister_driver call
  intel idle: Make idle driver more robust
  intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
  ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
  intel_idle: remove redundant local_irq_disable() call
  ACPI processor: Fix error path, also remove sysdev link
  ACPI: processor: fix acpi_get_cpuid for UP processor
  intel_idle: fix API misuse
  ACPI APEI: Convert atomicio routines
  ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Fix possible alignment issues with GAS 'address' references
  ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
  ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
  ACPI: Store SRAT table revision
  ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
  ACPI, Record ACPI NVS regions
  ACPI, APEI, EINJ, Refine the fix of resource conflict
  ...
2012-01-18 15:51:48 -08:00
Len Brown 79ba0db69c Merge branches 'einj', 'intel_idle', 'misc', 'srat' and 'turbostat-ivb' into release 2012-01-18 01:15:54 -05:00
Tony Luck c130bd6f82 acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
ACPI 5.0 provides extensions to the EINJ mechanism to specify the
target for the error injection - by APICID for cpu related errors,
by address for memory related errors, and by segment/bus/device/function
for PCIe related errors. Also extensions for vendor specific error
injections.

Tested-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-18 01:14:17 -05:00
Kurt Garloff 8df0eb7c9d ACPI: Store SRAT table revision
In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides
32bits for these. The new fields were reserved before.
According to the ACPI spec, the OS must disregrard reserved fields.
In order to know whether or not, we must know what version the SRAT
table has.

This patch stores the SRAT table revision for later consumption
by arch specific __init functions.

Signed-off-by: Kurt Garloff <kurt@garloff.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 04:19:04 -05:00
Bob Moore 5d1f865726 ACPICA: Update to version 20120111
Version 20120111.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:38:52 -05:00
Lin Ming f654c0fefa ACPICA: Add support for region address conflict checking
Allows drivers to determine if any memory or I/O addresses
will conflict with addresses used by ACPI operation regions.
Introduces a new interface, acpi_check_address_range.

http://marc.info/?t=132251388700002&r=1&w=2

Reported-and-tested-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:38:50 -05:00
Bob Moore 240c320c59 ACPICA: Update to version 20111123
This version contains full support for the ACPI 5.0 specification.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:33 -05:00
Zhang Rui 25169b77f7 ACPI 5.0: Allow _AEI method in walk resources
_AEI contains a resource template, this change adds support for
the walk resources function.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:32 -05:00
Bob Moore 0e24317804 ACPI 5.0: New interface, acpi_buffer_to_resource
This interface converts an AML buffer to an internal ACPI_RESOURCE.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:31 -05:00
Bob Moore a91cdde20a ACPI 5.0: New interface, acpi_get_event_resources
Executes _AEI and formats the result, similar to acpi_get_current_resources, etc.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:30 -05:00
Lin Ming e0fe0a8d4e ACPI 5.0: Support for all new resource descriptors
FixedDMA, GPIO descriptors, SerialBus descriptors

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:30 -05:00
Bob Moore 2da120b684 ACPI 5.0: Support for GeneralPurposeIo and GenericSerialBus operation region
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:29 -05:00
Bob Moore 9ce81784c9 ACPI 5.0: Implement Connection() and AccessAs() changes
Support within the interpreter and operation region dispatch.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:29 -05:00
Lin Ming ffef68273b ACPI 5.0: New interfaces to allow driver access to AML mutex objects
Adds acpi_acquire_mutex, acpi_release_mutex external interfaces.
New file, utxfmutex.c.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:28 -05:00
Bob Moore c5bd653732 ACPI 5.0: Add new/changed tables to headers
Adds new file, actbl3.h

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:28 -05:00
Bob Moore 22e5b40ab2 ACPI 5.0: Implement hardware-reduced option
If HW-reduced flag is set in the FADT, do not attempt to access
or initialize any ACPI hardware, including SCI and global lock.
No FACS will be present.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:28 -05:00
Bob Moore 2355e10f07 ACPI 5.0: Basic support for FADT version 5
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:36:27 -05:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Linus Torvalds 3c00303206 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  cpuidle: Single/Global registration of idle states
  cpuidle: Split cpuidle_state structure and move per-cpu statistics fields
  cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
  cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
  ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning
  ACPI: Export FADT pm_profile integer value to userspace
  thermal: Prevent polling from happening during system suspend
  ACPI: Drop ACPI_NO_HARDWARE_INIT
  ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast()
  PNPACPI: Simplify disabled resource registration
  ACPI: Fix possible recursive locking in hwregs.c
  ACPI: use kstrdup()
  mrst pmu: update comment
  tools/power turbostat: less verbose debugging
2011-11-07 10:13:52 -08:00
Len Brown efb90582c5 Merge branches 'acpi', 'idle', 'mrst-pmu' and 'pm-tools' into next 2011-11-06 22:14:50 -05:00
Deepthi Dharwar 46bcfad7a8 cpuidle: Single/Global registration of idle states
This patch makes the cpuidle_states structure global (single copy)
instead of per-cpu. The statistics needed on per-cpu basis
by the governor are kept per-cpu. This simplifies the cpuidle
subsystem as state registration is done by single cpu only.
Having single copy of cpuidle_states saves memory. Rare case
of asymmetric C-states can be handled within the cpuidle driver
and architectures such as POWER do not have asymmetric C-states.

Having single/global registration of all the idle states,
dynamic C-state transitions on x86 are handled by
the boot cpu. Here, the boot cpu  would disable all the devices,
re-populate the states and later enable all the devices,
irrespective of the cpu that would receive the notification first.

Reference:
https://lkml.org/lkml/2011/4/25/83

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Tested-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06 21:13:58 -05:00