Commit Graph

16570 Commits

Author SHA1 Message Date
Linus Torvalds 99bece775f Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c changes from Wolfram Sang:

 - an arbitration driver.  While the driver is quite simple, it caused
   discussion if we need additional arbitration on top of the one
   specified in the I2C standard.  Conclusion is that I accept a few
   generic mechanisms, but not very specific ones.

 - the core lost the detach_adapter() call.  It has no users anymore and
   was in the way for other cleanups.  attach_adapter() is sadly still
   there since there are users waiting to be converted.

 - the core gained a bus recovery infrastructure.  I2C defines a way to
   recover if the data line is stalled.  This mechanism is now in the
   core and drivers can now pass some data to make use of it.

 - bigger driver cleanups for designware, s3c2410

 - removing superfluous refcounting from drivers

 - removing Ben Dooks as second maintainer due to inactivity.  Thanks
   for all your work so far, Ben!

 - bugfixes, feature additions, devicetree fixups, simplifications...

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: xiic: must always write 16-bit words to TX_FIFO
  i2c: octeon: use HZ in timeout value
  i2c: octeon: Fix i2c fail problem when a process is terminated by a signal
  i2c: designware-pci: drop superfluous {get|put}_device
  i2c: designware-plat: drop superfluous {get|put}_device
  i2c: davinci: drop superfluous {get|put}_device
  MAINTAINERS: Ben Dooks is inactive regarding I2C
  i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  i2c: at91: convert to dma_request_slave_channel_compat()
  i2c: mxs: do error checking and handling in PIO mode
  i2c: mxs: remove races in PIO code
  i2c-designware: switch to use runtime PM autosuspend
  i2c-designware: use usleep_range() in the busy-loop
  i2c-designware: enable/disable the controller properly
  i2c-designware: use dynamic adapter numbering on Lynxpoint
  i2c-designware-pci: use managed functions pcim_* and devm_*
  i2c-designware-pci: use dev_err() instead of printk()
  i2c-designware: move to managed functions (devm_*)
  i2c: remove CONFIG_HOTPLUG ifdefs
  i2c: s3c2410: Add SMBus emulation for block read
  ...
2013-05-02 14:38:53 -07:00
Linus Torvalds 20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
David Howells 0c2f343825 zoran: Don't print proc_dir_entry data in debug
Don't print proc_dir_entry data in debug as we're soon to have no direct
access to the contents of the PDE.  Print what was put in there instead.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: mjpeg-users@lists.sourceforge.net
cc: linux-media@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:43 -04:00
David Howells 271a15eabe proc: Supply PDE attribute setting accessor functions
Supply accessor functions to set attributes in proc_dir_entry structs.

The following are supplied: proc_set_size() and proc_set_user().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
cc: linuxppc-dev@lists.ozlabs.org
cc: linux-media@vger.kernel.org
cc: netdev@vger.kernel.org
cc: linux-wireless@vger.kernel.org
cc: linux-pci@vger.kernel.org
cc: netfilter-devel@vger.kernel.org
cc: alsa-devel@alsa-project.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01 17:29:18 -04:00
Linus Torvalds 73287a43cc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...
2013-05-01 14:08:52 -07:00
Linus Torvalds a49fe6d59a Merge branch 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull omap3isp clk support from Mauro Carvalho Chehab:
 "This patch were sent in separate as it depends on a merge from clock
  framework, that you merged in commit 362ed48dee50"

* 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] omap3isp: Use the common clock framework
2013-05-01 09:57:04 -07:00
Linus Torvalds 240c3c3424 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media update from Mauro Carvalho Chehab:

 - OF documentation and patches at core and drivers, to be used by for
   embedded media systems

 - some I2C drivers used on go7007 were rewritten/promoted from staging:
   sony-btf-mpx, tw2804, tw9903, tw9906, wis-ov7640, wis-uda1342

 - add fimc-is driver (Exynos)

 - add a new radio driver: radio-si476x

 - add a two new tuners: r820t and tuner_it913x

 - split camera code on em28xx driver and add more models

 - the cypress firmware load is used outside dvb usb drivers.  So, move
   it to a common directory to make easier to re-use it

 - siano media driver updated to work with sms2270 devices

 - several work done in order to promote go7007 and solo6x1x out of
   staging (still, there are some pending issues)

 - several API compliance fixes at v4l2 drivers that don't behave as
   expected

 - as usual, lots of driver fixes, improvements, cleanups and new device
   addition at the existing drivers.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...
2013-04-30 09:58:16 -07:00
Linus Torvalds 5d434fcb25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small
  code cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits)
  mm: Convert print_symbol to %pSR
  gfs2: Convert print_symbol to %pSR
  m32r: Convert print_symbol to %pSR
  iostats.txt: add easy-to-find description for field 6
  x86 cmpxchg.h: fix wrong comment
  treewide: Fix typo in printk and comments
  doc: devicetree: Fix various typos
  docbook: fix 8250 naming in device-drivers
  pata_pdc2027x: Fix compiler warning
  treewide: Fix typo in printks
  mei: Fix comments in drivers/misc/mei
  treewide: Fix typos in kernel messages
  pm44xx: Fix comment for "CONFIG_CPU_IDLE"
  doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP"
  mmzone: correct "pags" to "pages" in comment.
  kernel-parameters: remove outdated 'noresidual' parameter
  Remove spurious _H suffixes from ifdef comments
  sound: Remove stray pluses from Kconfig file
  radio-shark: Fix printk "CONFIG_LED_CLASS"
  doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE
  ...
2013-04-30 09:36:50 -07:00
Mauro Carvalho Chehab df90e22589 Merge branch 'devel-for-v3.10' into v4l_for_linus
* patchwork: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

Conflicts:
	drivers/media/pci/cx25821/cx25821-video.c
	drivers/media/platform/Kconfig
2013-04-30 09:01:04 -03:00
Philipp Zabel 657eee7d25 media: coda: use genalloc API
This patch depends on "genalloc: add devres support, allow to find a
managed pool by device", which provides the of_get_named_gen_pool and
dev_get_gen_pool functions.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Dong Aisheng <dong.aisheng@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Shijie <shijie8@gmail.com>
Cc: Matt Porter <mporter@ti.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:13 -07:00
Al Viro 03feee373f dvb_frontend: don't mess with ->f_op in ->release()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-29 15:41:47 -04:00
Al Viro 7caf2184f2 dvb_net: don't mess with ->f_op in ->release()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-29 15:41:47 -04:00
Mauro Carvalho Chehab 02615ed5e1 [media] cx88: make core less verbose
Along the time, several debug messages were added at cx88-cards.
While those are still useful to track some troubles with
tuners, they're too verbose:
[ 5768.281801] cx88[0]: Calling XC2028/3028 callback
[ 5768.287388] cx88[0]: Calling XC2028/3028 callback
[ 5768.292575] cx88[0]: Calling XC2028/3028 callback
[ 5768.299408] cx88[0]: Calling XC2028/3028 callback
[ 5768.306244] cx88[0]: Calling XC2028/3028 callback
...

and, most of the time, useless.

So, disable them, except if core_debug modprobe parameter
is used.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-28 12:40:52 -03:00
Mauro Carvalho Chehab a3b60209e7 [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
em28xx is oopsing with some DVB devices:

[10856.061884] general protection fault: 0000 [#1] SMP
[10856.067041] Modules linked in: rc_hauppauge em28xx_rc xc5000 drxk em28xx_dvb dvb_core em28xx videobuf2_vmalloc videobuf2_memops videobuf2_core rc_pixelview_new tuner_xc2028 tuner cx8800 cx88xx tveeprom btcx_risc videobuf_dma_sg videobuf_core rc_core v4l2_common videodev ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_CHECKSUM be2iscsi iscsi_boot_sysfs iptable_mangle bnx2i cnic uio cxgb4i cxgb4 tun bridge cxgb3i cxgb3 stp ip6t_REJECT mdio libcxgbi nf_conntrack_ipv6 llc nf_defrag_ipv6 ib_iser rdma_cm ib_addr xt_conntrack iw_cm ib_cm ib_sa nf_conntrack ib_mad ib_core bnep bluetooth iscsi_tcp libiscsi_tcp ip6table_filter libiscsi ip6_tables scsi_transport_iscsi xfs libcrc32c snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm tg3 snd_page_alloc snd_timer
[10856.139176]  snd ptp iTCO_wdt soundcore pps_core iTCO_vendor_support lpc_ich mfd_core coretemp nfsd hp_wmi crc32c_intel microcode serio_raw rfkill sparse_keymap nfs_acl lockd sunrpc kvm_intel kvm uinput binfmt_misc firewire_ohci nouveau mxm_wmi i2c_algo_bit drm_kms_helper firewire_core crc_itu_t ttm drm i2c_core wmi [last unloaded: dib0070]
[10856.168969] CPU 1
[10856.170799] Pid: 13606, comm: dvbv5-zap Not tainted 3.9.0-rc5+ #26 Hewlett-Packard HP Z400 Workstation/0AE4h
[10856.181187] RIP: 0010:[<ffffffffa0459e47>]  [<ffffffffa0459e47>] em28xx_write_regs_req+0x37/0x1c0 [em28xx]
[10856.191028] RSP: 0018:ffff880118401a58  EFLAGS: 00010282
[10856.196533] RAX: 00020000012d0000 RBX: ffff88010804aec8 RCX: ffff880118401b14
[10856.203852] RDX: 0000000000000048 RSI: 0000000000000000 RDI: ffff88010804aec8
[10856.211174] RBP: ffff880118401ac8 R08: 0000000000000001 R09: 0000000000000000
[10856.218496] R10: 0000000000000000 R11: 0000000000000006 R12: 0000000000000048
[10856.226026] R13: ffff880118401b14 R14: ffff88011752b258 R15: ffff88011752b258
[10856.233352] FS:  00007f26636d2740(0000) GS:ffff88011fc20000(0000) knlGS:0000000000000000
[10856.241626] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[10856.247565] CR2: 00007f2663716e20 CR3: 00000000c7eb1000 CR4: 00000000000007e0
[10856.254889] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[10856.262215] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[10856.269542] Process dvbv5-zap (pid: 13606, threadinfo ffff880118400000, task ffff8800cd625d40)
[10856.278340] Stack:
[10856.280564]  ffff88011ffe8de8 0000000000000002 0000000000000000 ffff88011ffe9b00
[10856.288191]  ffff880118401b14 00ff88011ffe9b08 ffff880100000048 ffffffff8112a52a
[10856.295893]  0000000000000001 ffff88010804aec8 0000000000000048 ffff880118401b14
[10856.303521] Call Trace:
[10856.306182]  [<ffffffff8112a52a>] ? __alloc_pages_nodemask+0x15a/0x960
[10856.312912]  [<ffffffffa045a002>] em28xx_write_regs+0x32/0xa0 [em28xx]
[10856.319638]  [<ffffffffa045a221>] em28xx_write_reg+0x21/0x30 [em28xx]
[10856.326279]  [<ffffffffa045a2cc>] em28xx_gpio_set+0x9c/0x100 [em28xx]
[10856.332919]  [<ffffffffa045a3ac>] em28xx_set_mode+0x7c/0x80 [em28xx]
[10856.339472]  [<ffffffffa03ef032>] em28xx_dvb_bus_ctrl+0x32/0x40 [em28xx_dvb]

This is caused by commit c7a45e5b4f,
that added support for two I2C buses. A partial fix was applied
at 3de09fbbfa, but it doesn't cover
all cases, as the DVB core fills fe->dvb->priv with adapter->priv.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-28 12:39:41 -03:00
Linus Torvalds d7d7271f42 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
 "Two driver fixes.

  One avoids reading any file at a system with a cx25821 board
  (fortunately, this is not a common device).  The other one prevents
  reading after a buffer with ISDB-T devices based on mb86a20s."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] cx25821: do not expose broken video output streams
  [media] mb86a20s: Fix estimate_rate setting
2013-04-26 08:17:07 -07:00
Gianluca Gennari 4494f0fdd8 [media] s5c73m3: fix indentation of the help section in Kconfig
The 'help' section of the Kconfig entry for this driver is missing
an extra alignment. That seems to violate what's stated at:
	Documentation/kbuild/kconfig-language.txt

Even if it works, the better is to add 2 extra spaces there, as
this is the common practice and helps human reading of the file.

Also, the way it is, it breaks backport trees.

Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 16:20:09 -03:00
Mauro Carvalho Chehab f327cabf7f [media] cx25821-alsa: get rid of a __must_check warning
The hole reason for __must_check is to not ignore an error.

However, a "ret" value is used at cx25821 just to avoid the
Kernel compilation to compain about it.

That, however, produces another warning (with W=1):

drivers/media/pci/cx25821/cx25821-alsa.c: In function 'cx25821_audio_fini':
drivers/media/pci/cx25821/cx25821-alsa.c:727:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]

With the current implementation of driver_for_each_device() and
cx25821_alsa_exit_callback(), there's actually just one
very unlikely condition where it will currently produce
an error: if driver_find() returns NULL.

Ok, there's not much that can be done, as it is on a driver's
function that returns void, but it can at least print some message
if the error happens.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 16:12:04 -03:00
Mauro Carvalho Chehab a3f17af2d9 [media] cx25821-video: declare cx25821_vidioc_s_std as static
Fixes the following warning:

	drivers/media/pci/cx25821/cx25821-video.c: At top level:
	drivers/media/pci/cx25821/cx25821-video.c:766:5: warning: no previous prototype for 'cx25821_vidioc_s_std' [-Wmissing-prototypes]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 16:07:11 -03:00
Mauro Carvalho Chehab 66f9317804 [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
After cx25821-video cleanup, this var is not used anymore:

drivers/media/pci/cx25821/cx25821-video.c: In function 'cx25821_vidioc_try_fmt_vid_cap':
drivers/media/pci/cx25821/cx25821-video.c:591:15: warning: variable 'maxw' set but not used [-Wunused-but-set-variable]

as the code now checks the max width as the default case for the
range check.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 16:07:10 -03:00
Mauro Carvalho Chehab 7063c1456f [media] r820t: Remove a warning for an unused value
Currently, the driver complains about the pre_detect var:

	drivers/media/tuners/r820t.c: In function 'r820t_sysfreq_sel':
	drivers/media/tuners/r820t.c:722:31: warning: variable 'pre_dect' set but not used [-Wunused-but-set-variable]

While rtl8232 code comments it, perhaps some other driver may use.
So, the better is to keep the code there, allowing to enable it
via r820t config data.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 16:07:04 -03:00
Mauro Carvalho Chehab 751dc8c7fa [media] dib0090: Fix a warning at dib0090_set_EFUSE
The check if the values for c, h and n are within the range is
always true, as, if one of this values is out of range, the
previous "if" clauses will default to a value within the
range.

That fixes the following warning:

	drivers/media/dvb-frontends/dib0090.c: In function 'dib0090_set_EFUSE':
	drivers/media/dvb-frontends/dib0090.c:1545:5: warning: comparison is always true due to limited range of data type [-Wtype-limits]

and makes the code easier to read.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 16:06:55 -03:00
Mauro Carvalho Chehab 13122f98c6 [media] dib8000: fix a warning
drivers/media/dvb-frontends/dib8000.c: In function 'dib8000_wait_lock':
drivers/media/dvb-frontends/dib8000.c:3972:1: warning: 'value' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/media/dvb-frontends/dib8000.c:2419:6: note: 'value' was declared here

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 15:25:19 -03:00
Mauro Carvalho Chehab 746f7ae0e9 [media] dib8000: Fix sub-channel range
isdbt_sb_subchannel is unsigned with 8 bits. So, it will
never be -1. Instead, any value bigger than 13 is invalid.

As is, the current code generates the following warnings:

drivers/media/dvb-frontends/dib8000.c: In function 'dib8000_set_isdbt_common_channel':
drivers/media/dvb-frontends/dib8000.c:2358:3: warning: comparison is always true due to limited range of data type [-Wtype-limits]
drivers/media/dvb-frontends/dib8000.c: In function 'dib8000_tune':
drivers/media/dvb-frontends/dib8000.c:3107:8: warning: comparison is always false due to limited range of data type [-Wtype-limits]
drivers/media/dvb-frontends/dib8000.c:3153:9: warning: comparison is always false due to limited range of data type [-Wtype-limits]
drivers/media/dvb-frontends/dib8000.c:3160:5: warning: comparison is always false

It should also be noticed that ARIB STD-B31, item
"3.15.6.8 Number of segments" at TMCC table defines the
value 15 for unused segment, and 14 as reserved.

So, better to change the check to consider any value
bigger than 13 to mean that sub-channels should be
disabled, fixing the warning and doing the right thing
even if an invalid value is filled by userspace.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 15:13:49 -03:00
Mauro Carvalho Chehab c82056d0b4 [media] dib8000: store dtv_property_cache in a temp var
dtv_property_cache is used on several places on very long lines.

On all places it is used, a long list of struct reference is done.

Instead of doing it, at the routines where it is used more than once,
replace it by one temporary var. That may help the compiler to
use a better code. It also makes easier to review the code, as the
lines becomes closer to 80 columns, making them a way clearer
to read.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 10:51:15 -03:00
Mauro Carvalho Chehab 6f7ee06f4e [media] dib8000: warning fix: declare internal functions as static
drivers/media/dvb-frontends/dib8000.c:2412:5: warning: no previous prototype for 'dib8000_wait_lock' [-Wmissing-prototypes]
drivers/media/dvb-frontends/dib8000.c:2688:5: warning: no previous prototype for 'dib8000_get_symbol_duration' [-Wmissing-prototypes]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 10:36:56 -03:00
Fengguang Wu 619ab8f611 [media] r820t: quiet gcc warning on n_ring
drivers/media/tuners/r820t.c: In function 'r820t_imr':
 drivers/media/tuners/r820t.c:1871:8: warning: 'n_ring' may be used uninitialized in this function [-Wmaybe-uninitialized]
Mauro: This is a FALSE POSITIVE: the loop will always return a value
for n_ring, as the last test will fill it with 15, if the loop fails.

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 10:30:54 -03:00
Dan Carpenter ef0c87001c [media] r820t: memory leak in release()
I've moved the kfree(fe->tuner_priv) one line earlier, otherwise it is
a no-op.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 10:30:42 -03:00
Dan Carpenter f7a12fdfd6 [media] r820t: precendence bug in r820t_xtal_check()
The test as written is always false.  It looks like the intent was to
test that the bit was not set.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 10:29:56 -03:00
Mauro Carvalho Chehab a5d0568e2a Merge branch 'topic/cx25821' into patchwork
* topic/cx25821: (31 commits)
  [media] cx25821: remove cx25821-audio-upstream.c from the Makefile
  [media] cx25821: replace custom ioctls with write()
  [media] cx25821: drop cx25821-video-upstream-ch2.c/h
  [media] cx25821: add output format ioctls
  [media] cx25821: prepare querycap for output support
  [media] cx25821: group all fmt functions together
  [media] cx25821: setup output nodes correctly
  [media] cx25821: remove references to subdevices that aren't there
  [media] cx25821: remove custom ioctls that duplicate v4l2 ioctls
  [media] cx25821: g/s/try/enum_fmt related fixes and cleanups
  [media] cx25821: switch to v4l2_fh, add event and prio handling
  [media] cx25821: replace resource management functions with fh ownership
  [media] cx25821: move vidq from cx25821_fh to cx25821_channel
  [media] cx25821: remove 'type' field from cx25821_fh
  [media] cx25821: use core locking
  [media] cx25821: remove unnecessary debug messages
  [media] cx25821: remove TRUE/FALSE/STATUS_(UN)SUCCESSFUL defines
  [media] cx25821: convert to the control framework
  [media] cx25821: embed video_device, clean up some kernel log spam
  [media] cx25821: remove bogus dependencies
  ...
2013-04-25 10:28:18 -03:00
Mauro Carvalho Chehab 966a160187 Merge branch 'topic/si476x' into patchwork
* topic/si476x:
  Revert "[media] mfd: Add chip properties handling code for SI476X MFD"
  Revert "[media] mfd: Add the main bulk of core driver for SI476x code"
  Revert "[media] mfd: Add commands abstraction layer for SI476X MFD"
  [media] v4l2: Add a V4L2 driver for SI476X MFD
2013-04-25 10:26:43 -03:00
Mauro Carvalho Chehab cfc3d6c444 Merge branch 'topic/r820t' into patchwork
* topic/r820t: (31 commits)
  [media] r820t: Don't divide the IF by two
  [media] r820t: disable auto gain/VGA setting
  [media] rtl2832: Fix IF calculus
  [media] r820t: put it into automatic gain mode
  [media] r820t: Fix hp_cor filter mask
  [media] r820t: fix PLL calculus
  [media] r820t: Don't put it in standby if not initialized yet
  [media] r820t: avoid rewrite all regs when not needed
  [media] r820t: Allow disabling IMR callibration
  [media] r820t: add a commented code for GPIO
  [media] r820t: add IMR calibrate code
  [media] r820t: proper initialize the PLL register
  [media] r820t: use usleep_range()
  [media] r820t: fix prefix of the r820t_read() function
  [media] r820t: split the function that read cached regs
  [media] r820t: better report signal strength
  [media] r820t: add support for diplexer
  [media] r820t: Show the read data in the bit-reversed order
  [media] r820t: use the second table for 7MHz
  [media] r820t: Invert bits for read ops
  ...
2013-04-25 10:26:21 -03:00
Geert Uytterhoeven 542b329f8e [media] anysee: Grammar s/report the/report to/
[mchehab@redhat.com: Fix a merge conflict]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:56:55 -03:00
Geert Uytterhoeven ecb52ab821 [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
drivers/media/usb/dvb-usb-v2/anysee.c: In function ‘anysee_frontend_attach’:
drivers/media/usb/dvb-usb-v2/anysee.c:641: warning: ‘ret’ may be used uninitialized in this function
And gcc is right (see the ANYSEE_HW_507T case), so initialize ret to zero
to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:55:16 -03:00
Mauro Carvalho Chehab 7f8414594e [media] media: videobuf2: fix the length check for mmap
Memory maps typically require that the buffer size to be page
aligned. Currently, two memops drivers do such alignment
internally, but videobuf-vmalloc doesn't.
Also, the buffer overflow check doesn't take it into account.
So, instead of doing it at each memops driver, enforce it at
VB2 core.

Reported-by: Prabhakar lad <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:54:00 -03:00
Frank Schaefer b3404a8ef5 [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
X-Patchwork-Delegate: mchehab@redhat.com
In addition to commit 72cc9ba3 "em28xx: ignore isoc DVB USB endpoints with
wMaxPacketSize = 0 bytes for all alt settings" we should not save the endpoint
number of the isoc DVB endpoint before it has been validated.
While the current code works fine, dev->dvb_ep_isoc != 0 could be interpreted
as indicator that the device provides DVB support.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:51:23 -03:00
Mauro Carvalho Chehab cb132cd5d7 [media] videobuf-dma-contig: remove support for cached mem
videobuf_queue_dma_contig_init_cached() is not used anywhere.
Drop support for it, cleaning up the code a little bit.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:50:19 -03:00
Hans Verkuil d95d7c6412 [media] mem2mem_testdev: set timestamp_type and add debug param
While testing v4l2-ctl I noticed that this m2m driver didn't set timestamp_type
and that it spammed the kernel log with debug messages. Set timestamp_type
correctly and add debug module option to enable debug messages.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:48:49 -03:00
Kamil Debski a8c9c34570 [media] mx2-emmaprp: Add copy time stamp handling
Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:48:25 -03:00
Kamil Debski 7f1e8f197e [media] m2m-deinterlace: Add copy time stamp handling
Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:48:14 -03:00
Kamil Debski 9c303ec6db [media] exynos-gsc: Add copy time stamp handling
Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:48:04 -03:00
Kamil Debski ccd571cb67 [media] coda: Add copy time stamp handling
Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:47:51 -03:00
Kamil Debski 5600601731 [media] s5p-mfc: Optimize copy time stamp handling
For the sake of simplicity and readability memcpy was replaced with
assignment.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:47:36 -03:00
Kamil Debski aca326aeab [media] s5p-jpeg: Add copy time stamp handling
Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:47:22 -03:00
Kamil Debski dc7be2950b [media] s5p-g2d: Add copy time stamp handling
Since the introduction of the timestamp_type field, it is necessary that
the driver chooses which type it will use. This patch adds support for
the timestamp_type.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:47:07 -03:00
Sylwester Nawrocki f0c24fd81f [media] exynos4-is: Copy timestamps from M2M OUTPUT to CAPTURE buffer queue
Add copying of buffer timestamps and set the timestamp_type to
V4L2_BUF_FLAG_TIMESTAMP_COPY to avoid warnings about UNDEFINED
timestamp type like:
WARNING: at drivers/media/v4l2-core/videobuf2-core.c:2042 vb2_queue_init+0xe0/0x18c()
Modules linked in:
[<c0016ef0>] (unwind_backtrace+0x0/0x13c) from [<c0029b3c>] (warn_slowpath_common+0x54/0x64)
[<c0029b3c>] (warn_slowpath_common+0x54/0x64) from [<c0029b68>] (warn_slowpath_null+0x1c/0x24)
[<c0029b68>] (warn_slowpath_null+0x1c/0x24) from [<c03b7018>] (vb2_queue_init+0xe0/0x18c)
[<c03b7018>] (vb2_queue_init+0xe0/0x18c) from [<c03b4e08>] (v4l2_m2m_ctx_init+0xa0/0xc4)
[<c03b4e08>] (v4l2_m2m_ctx_init+0xa0/0xc4) from [<c03ca6c4>] (fimc_m2m_open+0x130/0x1f8)
[<c03ca6c4>] (fimc_m2m_open+0x130/0x1f8) from [<c03a5dd4>] (v4l2_open+0xac/0xe8)
[<c03a5dd4>] (v4l2_open+0xac/0xe8) from [<c0113920>] (chrdev_open+0x9c/0x158)
[<c0113920>] (chrdev_open+0x9c/0x158) from [<c010e488>] (do_dentry_open+0x1f8/0x280)
[<c010e488>] (do_dentry_open+0x1f8/0x280) from [<c010e600>] (finish_open+0x34/0x50)
[<c010e600>] (finish_open+0x34/0x50) from [<c011cc58>] (do_last+0x5bc/0xc00)
[<c011cc58>] (do_last+0x5bc/0xc00) from [<c011d34c>] (path_openat+0xb0/0x484)
[<c011d34c>] (path_openat+0xb0/0x484) from [<c011d824>] (do_filp_open+0x30/0x84)
[<c011d824>] (do_filp_open+0x30/0x84) from [<c010e0f8>] (do_sys_open+0xe8/0x170)
[<c010e0f8>] (do_sys_open+0xe8/0x170) from [<c000f040>] (ret_fast_syscall+0x0/0x30)

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:38:48 -03:00
Sylwester Nawrocki cbd53542ca [media] exynos4-is: Fix TRY format propagation at MIPI-CSIS subdev
Ensure TRY format is propagated from the sink to source pad.
The format at both pads is always same so the TRY format buffer
for pad 0 is used to hold format for both pads.
While at it remove redundant fmt->pad checking.

Reported-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:38:23 -03:00
Sylwester Nawrocki aceb59ed34 [media] exynos4-is: Fix driver name reported in vidioc_querycap
Originally struct v4l2_capability driver and card name was filled
with name of the platform device. After switching to the device tree
the device names have changed and now are 4 different driver names
reported, depending on the video device opened. So instead of e.g.
"exynos4-fimc" there is now one of: 11800000.fimc, 11810000.fimc,
11820000.fimc, 11830000.fimc.
Fix this by using dev->driver_name, rather than platform device name.
A common vidioc_querycap function is created for both M2M and capture
video node.
This fixes any breakage at user space should any application/library
rely on the driver's name.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:38:04 -03:00
Wei Yongjun d68b44e088 [media] s5p-mfc: fix error return code in s5p_mfc_probe()
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:37:24 -03:00
Sylwester Nawrocki b34f51fad3 [media] exynos4-is: Fix runtime PM handling on fimc-is probe error path
Ensure there is no unbalanced pm_runtime_put().

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:37:12 -03:00
Sylwester Nawrocki 0e30c7e1f1 [media] exynos4-is: Change function call order in fimc_is_module_exit()
Due to hardware dependencies (clocks/power domain) the I2C bus
controller needs to be unregistered before fimc-is.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-25 09:36:52 -03:00