Commit Graph

65 Commits

Author SHA1 Message Date
Jesse Gross f6957f88e5 vmxnet3: Don't enable vlan filters in promiscuous mode.
The vmxnet3 driver enables vlan filters if filtering is enabled for
any vlan.  In promiscuous mode the filter table is cleared to in
order to disable filtering.  However, if a vlan device is subsequently
created that vlan will be added to the filter, re-engaging it.  As a
result, not only do we not see all the vlans in promiscuous mode, we
don't even see vlans for which a filter was previously created.

CC: Scott J. Goldman <scottjg@vmware.com>
CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: VMware PV-Drivers <pv-drivers@vmware.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13 18:00:32 -07:00
Shreyas Bhatewara ebbf9295b1 vmxnet3: fix publicity of NETIF_F_HIGHDMA
NETIF_F_HIGHDMA is being disabled even when dma64 is true. This patch fixes it.

CC: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21 20:39:47 -07:00
Shreyas Bhatewara e101e7ddad vmxnet3: set netdev parant device before calling netdev_info
Parent device for netdev should be set before netdev_info() can be called
otherwise there is a NULL pointer dereference and probe() fails.

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>--
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21 20:39:47 -07:00
David S. Miller 6a7ebdf2fd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/bluetooth/l2cap_core.c
2011-07-14 07:56:40 -07:00
Shreyas Bhatewara eebb02b1f0 vmxnet3: round down # of queues to power of two
vmxnet3 device supports only power-of-two number of queues. The driver
therefore needs to check this and rounds down the number of queues to the
nearest power of two.

Signed-off-by: Yong Wang <yongwang@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
2011-07-07 00:25:52 -07:00
David S. Miller e12fe68ce3 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2011-07-05 23:23:37 -07:00
Shreyas Bhatewara 5318d809d7 vmxnet3: fix starving rx ring whenoc_skb kb fails
If the rx ring is completely empty, then the device may never fire an rx
interrupt. Unfortunately, the rx interrupt is what triggers populating the
rx ring with fresh buffers, so this will cause networking to lock up.

This patch replenishes the skb in recv descriptor as soon as it is
peeled off while processing rx completions. If the skb/buffer
allocation fails, existing one is recycled and the packet in hand is
dropped. This way none of the RX desc is ever left empty, thus avoiding
starvation

Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05 18:39:40 -07:00
Jesse Gross 213ade8ca8 vmxnet3: Enable GRO support.
When receiving packets from another guest on the same hypervisor, it's
generally possible to receive large packets because no segmentation is
necessary and these packets are handled by LRO.  However, when doing
routing or bridging we must disable LRO and lose this benefit.  In
these cases GRO can still be used and it is very effective because the
packets which are segmented in the hypervisor are received very close
together and can easily be merged.

CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: Scott Goldman <scottjg@vmware.com>
CC: VMware PV-Drivers <pv-drivers@vmware.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27 22:08:38 -07:00
Jesse Gross 72e85c45b9 vmxnet3: Convert to new vlan model.
This converts the vmxnet3 driver to use the new vlan model.  In doing so
it fixes missing tags in tcpdump and failure to do checksum offload when
tx vlan offload is disabled.

CC: Shreyas Bhatewara <sbhatewara@vmware.com>
CC: VMware PV-Drivers <pv-drivers@vmware.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27 20:56:51 -07:00
Neil Horman b7c7deeb4c vmxnet3: remove unused variable
While doing some backporting I noticed that vmxnet3 had a variable that was set
but never used.  Get rid of it, and stop the compiler from griping

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-13 18:31:09 -04:00
stephen hemminger 95305f6c3b vmxnet3: convert to 64 bit stats interface
Convert vmxnet3 driver to 64 bit statistics interface.
This driver was already counting packet per queue in a 64 bit value so not
a huge change. Eliminate unused old net_device_stats structure.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08 23:26:32 -07:00
David S. Miller 9cbc94eabb Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/vmxnet3/vmxnet3_ethtool.c
	net/core/dev.c
2011-05-17 17:33:11 -04:00
Thomas Jarosch ebde6f8acb vmxnet3: Fix inconsistent LRO state after initialization
During initialization of vmxnet3, the state of LRO
gets out of sync with netdev->features.

This leads to very poor TCP performance in a IP forwarding
setup and is hitting many VMware users.

Simplified call sequence:
1. vmxnet3_declare_features() initializes "adapter->lro" to true.

2. The kernel automatically disables LRO if IP forwarding is enabled,
so vmxnet3_set_flags() gets called. This also updates netdev->features.

3. Now vmxnet3_setup_driver_shared() is called. "adapter->lro" is still
set to true and LRO gets enabled again, even though
netdev->features shows it's disabled.

Fix it by updating "adapter->lro", too.

The private vmxnet3 adapter flags are scheduled for removal
in net-next, see commit a0d2730c95
"net: vmxnet3: convert to hw_features".

Patch applies to 2.6.37 / 2.6.38 and 2.6.39-rc6.

Please CC: comments.

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16 15:05:23 -04:00
Shreyas Bhatewara e154b639bb vmxnet3: Use single tx queue when CONFIG_PCI_MSI not defined
Resending this patch with few changes.

Avoid multiple queues when MSI or MSI-X not available

Limit number of Tx queues to 1 if MSI/MSI-X support is not configured in
the kernel. This will make number of tx and rx queues equal when MSI/X
is not configured thus providing better performance.

Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12 17:32:53 -04:00
David S. Miller 3c709f8fb4 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-3.6
Conflicts:
	drivers/net/benet/be_main.c
2011-05-11 14:26:58 -04:00
Roland Dreier e328d41082 vmxnet3: Consistently disable irqs when taking adapter->cmd_lock
Using the vmxnet3 driver produces a lockdep warning because
vmxnet3_set_mc(), which is called with mc->mca_lock held, takes
adapter->cmd_lock.  However, there are a couple of places where
adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a
softirq that tries to take mc->mca_lock could happen while
adapter->cmd_lock is held, leading to an AB-BA deadlock.

I'm not sure if this is a real potential deadlock or not, but the
simplest and best fix seems to be simply to make sure we take cmd_lock
with spin_lock_irqsave() everywhere -- the places with plain spin_lock
just look like oversights.

The full enormous lockdep warning is:

 =========================================================
 [ INFO: possible irq lock inversion dependency detected ]
 2.6.39-rc6+ #1
 ---------------------------------------------------------
 ifconfig/567 just changed the state of lock:
  (&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
 but this lock took another, SOFTIRQ-unsafe lock in the past:
  (&(&adapter->cmd_lock)->rlock){+.+...}

 and interrupts could create inverse lock ordering between them.

 other info that might help us debug this:
 4 locks held by ifconfig/567:
  #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20
  #1:  ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0
  #2:  (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0
  #3:  (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280

 the shortest dependencies between 2nd lock and 1st lock:
   -> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 {
      HARDIRQ-ON-W at:
                                            [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                            [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                            [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                            [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                            [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                            [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                            [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                            [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                            [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                            [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                            [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                            [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                            [<ffffffff813745b6>] driver_register+0x76/0x140
                                            [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                            [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                            [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                            [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                            [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      SOFTIRQ-ON-W at:
                                            [<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10
                                            [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                            [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                            [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                            [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                            [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                            [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                            [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                            [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                            [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                            [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                            [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                            [<ffffffff813745b6>] driver_register+0x76/0x140
                                            [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                            [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                            [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                            [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                            [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      INITIAL USE at:
                                           [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                           [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                           [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                           [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                           [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                           [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                           [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                           [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                           [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                           [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                           [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                           [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                           [<ffffffff813745b6>] driver_register+0x76/0x140
                                           [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                           [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                           [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                           [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                           [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
    }
    ... key      at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3]
    ... acquired at:
    [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
    [<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0
    [<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3]
    [<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0
    [<ffffffff81470040>] dev_set_rx_mode+0x30/0x50
    [<ffffffff81470127>] __dev_open+0xc7/0x100
    [<ffffffff814703c1>] __dev_change_flags+0xa1/0x180
    [<ffffffff81470568>] dev_change_flags+0x28/0x70
    [<ffffffff814da960>] devinet_ioctl+0x730/0x800
    [<ffffffff814db508>] inet_ioctl+0x88/0xa0
    [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
    [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
    [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
    [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
    [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

  -> (_xmit_ETHER){+.....} ops: 6 {
     HARDIRQ-ON-W at:
                                          [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                          [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                          [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                          [<ffffffff81475618>] __dev_mc_add+0x38/0x90
                                          [<ffffffff814756a0>] dev_mc_add+0x10/0x20
                                          [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
                                          [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                          [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                          [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
                                          [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                          [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
                                          [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
                                          [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
                                          [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
                                          [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
                                          [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                          [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                          [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                          [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                          [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                          [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                          [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                          [<ffffffff813745b6>] driver_register+0x76/0x140
                                          [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                          [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                          [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                          [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                          [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
     INITIAL USE at:
                                         [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                         [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                         [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                         [<ffffffff81475618>] __dev_mc_add+0x38/0x90
                                         [<ffffffff814756a0>] dev_mc_add+0x10/0x20
                                         [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
                                         [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                         [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                         [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
                                         [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                         [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
                                         [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
                                         [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
                                         [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
                                         [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
                                         [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                         [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                         [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                         [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                         [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                         [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                         [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                         [<ffffffff813745b6>] driver_register+0x76/0x140
                                         [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                         [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                         [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                         [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                         [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
   }
   ... key      at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0
   ... acquired at:
    [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
    [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
    [<ffffffff81475618>] __dev_mc_add+0x38/0x90
    [<ffffffff814756a0>] dev_mc_add+0x10/0x20
    [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
    [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
    [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
    [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
    [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
    [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
    [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
    [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
    [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
    [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
    [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
    [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
    [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
    [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
    [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
    [<ffffffff81373a2e>] driver_attach+0x1e/0x20
    [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
    [<ffffffff813745b6>] driver_register+0x76/0x140
    [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
    [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
    [<ffffffff81002165>] do_one_initcall+0x45/0x190
    [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
    [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

 -> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 {
    HARDIRQ-ON-W at:
                                        [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                        [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                        [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                        [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
                                        [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                        [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                        [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
                                        [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
                                        [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                        [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
                                        [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
    IN-SOFTIRQ-W at:
                                        [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
                                        [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                        [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                        [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
                                        [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
                                        [<ffffffff810666d0>] __do_softirq+0xc0/0x210
                                        [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
                                        [<ffffffff8100d42d>] do_softirq+0xad/0xe0
                                        [<ffffffff81066afe>] irq_exit+0x9e/0xb0
                                        [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
                                        [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
                                        [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
                                        [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
                                        [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
                                        [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
                                        [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                        [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
                                        [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
                                        [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
                                        [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
                                        [<ffffffff814da731>] devinet_ioctl+0x501/0x800
                                        [<ffffffff814db508>] inet_ioctl+0x88/0xa0
                                        [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
                                        [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
                                        [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
                                        [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
                                        [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
    INITIAL USE at:
                                       [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                       [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                       [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                       [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
                                       [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                       [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                       [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
                                       [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
                                       [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                       [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
                                       [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
  }
  ... key      at: [<ffffffff82801be2>] __key.40877+0x0/0x8
  ... acquired at:
    [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
    [<ffffffff8109a32c>] mark_lock+0x19c/0x400
    [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
    [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
    [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
    [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
    [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
    [<ffffffff810666d0>] __do_softirq+0xc0/0x210
    [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
    [<ffffffff8100d42d>] do_softirq+0xad/0xe0
    [<ffffffff81066afe>] irq_exit+0x9e/0xb0
    [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
    [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
    [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
    [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
    [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
    [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
    [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
    [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
    [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
    [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
    [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
    [<ffffffff814da731>] devinet_ioctl+0x501/0x800
    [<ffffffff814db508>] inet_ioctl+0x88/0xa0
    [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
    [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
    [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
    [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
    [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

 stack backtrace:
 Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1
 Call Trace:
  <IRQ>  [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170
  [<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170
  [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
  [<ffffffff8109a32c>] mark_lock+0x19c/0x400
  [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
  [<ffffffff8109a383>] ? mark_lock+0x1f3/0x400
  [<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10
  [<ffffffff81012255>] ? native_sched_clock+0x15/0x70
  [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
  [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
  [<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0
  [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
  [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
  [<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40
  [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
  [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
  [<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0
  [<ffffffff810122b9>] ? sched_clock+0x9/0x10
  [<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30
  [<ffffffff810666d0>] __do_softirq+0xc0/0x210
  [<ffffffff8109455f>] ? tick_program_event+0x1f/0x30
  [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
  [<ffffffff8100d42d>] do_softirq+0xad/0xe0
  [<ffffffff81066afe>] irq_exit+0x9e/0xb0
  [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
  [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
  <EOI>  [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13
  [<ffffffff810974a7>] ? lock_is_held+0x17/0xd0
  [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
  [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
  [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
  [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
  [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
  [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
  [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
  [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
  [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
  [<ffffffff814da731>] devinet_ioctl+0x501/0x800
  [<ffffffff8108a3af>] ? local_clock+0x6f/0x80
  [<ffffffff81575898>] ? do_page_fault+0x268/0x560
  [<ffffffff814db508>] inet_ioctl+0x88/0xa0
  [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
  [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
  [<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190
  [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
  [<ffffffff8117737e>] ? fget_light+0x33e/0x430
  [<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b
  [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
  [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-06 13:11:57 -07:00
David Decotigny 7073949720 ethtool: cosmetic: Use ethtool ethtool_cmd_speed API
This updates the network drivers so that they don't access the
ethtool_cmd::speed field directly, but use ethtool_cmd_speed()
instead.

For most of the drivers, these changes are purely cosmetic and don't
fix any problem, such as for those 1GbE/10GbE drivers that indirectly
call their own ethtool get_settings()/mii_ethtool_gset(). The changes
are meant to enforce code consistency and provide robustness with
future larger throughputs, at the expense of a few CPU cycles for each
ethtool operation.

All drivers compiled with make allyesconfig ion x86_64 have been
updated.

Tested: make allyesconfig on x86_64 + e1000e/bnx2x work
Signed-off-by: David Decotigny <decot@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29 14:03:01 -07:00
Michał Mirosław a0d2730c95 net: vmxnet3: convert to hw_features
This also removes private feature flags that were always set to true.

You may want to move vmxnet3_set_features() to vmxnet3_drv.c as a following
cleanup.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 23:04:00 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Stanislaw Gruszka 673e63c688 net: fix ethtool->set_flags not intended -EINVAL return value
After commit d5dbda2380 "ethtool: Add
support for vlan accleration.", drivers that have NETIF_F_HW_VLAN_TX,
and/or NETIF_F_HW_VLAN_RX feature, but do not allow enable/disable vlan
acceleration via ethtool set_flags, always return -EINVAL from that
function. Fix by returning -EINVAL only if requested features do not
match current settings and can not be changed by driver.

Change any driver that define ethtool->set_flags to use
ethtool_invalid_flags() to avoid similar problems in the future
(also on drivers that do not have the problem).

Tested with modified (to reproduce this bug) myri10ge driver.

Cc: stable@kernel.org # 2.6.37+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-27 23:35:24 -07:00
Shreyas Bhatewara 7e96fbf232 vmxnet3: Dont allocate extra MSI-x vectors
In case of single tx and rx queues, three MSI-x vectors are allocated instead
of two. This patch fixes that.

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15 21:21:14 -08:00
Shreyas Bhatewara 83d0feffc5 vmxnet3: Add locking for access to command register
Access to cmd register is racey, especially in smp environments. Protect
it using a spinlock.

Signed-off-by: Matthieu Bucchianeri <matthieu@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15 21:21:14 -08:00
Shreyas Bhatewara 51956cd68b vmxnet3: Disable napi in suspend, reenable in resume.
There is a small possibility of a race where the suspend routine gets
called, while a napi callback is still pending and when that comes up,
it enables interrupts which just got disabled in the suspend routine.
This change adds napi disable call in suspend and enable in resume to
avoid race.

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15 21:21:13 -08:00
Shreyas Bhatewara 76d39dae0a vmxnet3: Make ethtool handlers multiqueue aware
Show per-queue stats in ethtool -S output for vmxnet3 interface. Register dump
of ethtool should dump registers for all tx and rx queues.

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15 21:21:13 -08:00
Shreyas Bhatewara 39d4a96fd7 vmxnet3: Provide required number of bytes in first SG buffer
This is a performance enhancement fix. vmxnet3 device performs better when
provided with at least 54 bytes (ethernet 14 + IP 20+ TCP 20) in the first SG
buffer. For UDP packets driver provides lesser than that in first sg. This
change fixes the same. Also avoid the redundant pskb_may_pull() call.

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15 21:21:12 -08:00
Shreyas Bhatewara 54da3d00f6 vmxnet3: Enable HW Rx VLAN stripping by default
Make hw vlan tag stripping as enabled by default. Thereby remove
the code to conditionally enable it later.

Signed-off-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15 21:21:12 -08:00
Shreyas Bhatewara f9f2502626 vmxnet3: Preserve the MAC address configured by ifconfig
While activating the device get it's MAC address from netdev. This will allow
the MAC address configured using ifconfig to persist through the reset.

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15 21:21:11 -08:00
Shreyas Bhatewara a53255d38e vmxnet3: fix ring size update
Fix a bug while changing ring size when MTU is changed.

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15 21:21:11 -08:00
Joe Perches 215faf9c5f drivers/net/*/: Use static const
Using static const generally increases object text and decreases data size.
It also generally decreases overall object size.

Signed-off-by: Joe Perches <joe@perches.com>
2010-12-21 02:16:10 -08:00
Dan Carpenter f955e1415f vmxnet3: locking problems in xmit
There were several paths that didn't release their locks.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20 10:44:25 -08:00
Michał Mirosław 0d0b16727f net: Fix drivers advertising HW_CSUM feature to use csum_start
Some drivers are using skb_transport_offset(skb) instead of skb->csum_start
for NETIF_F_HW_CSUM offload.  This does not matter now, but if someone
implements checksumming of encapsulated packets then this will break silently.

TSO output paths are left as they are, since they are for IP+TCP only
(might be worth converting though).

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 14:43:15 -08:00
Tejun Heo 23f333a2bf drivers/net: don't use flush_scheduled_work()
flush_scheduled_work() is on its way out.  This patch contains simple
conversions to replace flush_scheduled_work() usage with direct
cancels and flushes.

Directly cancel the used works on driver detach and flush them in
other cases.

The conversions are mostly straight forward and the only dangers are,

* Forgetting to cancel/flush one or more used works.

* Cancelling when a work should be flushed (ie. the work must be
  executed once scheduled whether the driver is detaching or not).

I've gone over the changes multiple times but it would be much
appreciated if you can review with the above points in mind.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Divy Le Ray <divy@chelsio.com>
Cc: e1000-devel@lists.sourceforge.net
Cc: Vasanthy Kolluri <vkolluri@cisco.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Andrew Gallatin <gallatin@myri.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Cc: Matt Carlson <mcarlson@broadcom.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Shreyas Bhatewara <sbhatewara@vmware.com>
Cc: netdev@vger.kernel.org
2010-12-12 16:45:14 +01:00
Scott J. Goldman e9248fbd6b vmxnet3: fix compilation when RSS is disabled
If RSS is disabled, we can ifdef out some RSS specific code. This fixes
the compile error found by Randy Dunlap.

Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:25:33 -08:00
Shreyas Bhatewara 09c5088e5c net-next: Add multiqueue support to vmxnet3 driver
Add multiqueue support to vmxnet3 driver

This change adds multiqueue and thus receive side scaling support
to vmxnet3 device driver. Number of rx queues is limited to 1 in cases
where MSI is not configured or one MSIx vector is not available per rx
queue

Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-19 14:22:57 -08:00
Harvey Harrison 1b803fbfcd vmxnet: trivial annotation of protocol constant
Noticed by sparse:
drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16
drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16
drivers/net/vmxnet3/vmxnet3_drv.c:876:24: warning: restricted __be16 degrades to integer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30 16:19:45 -07:00
Harvey Harrison b8744cabb7 vmxnet3: remove unnecessary byteswapping in BAR writing macros
readl/writel swap to little-endian internally.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30 16:19:18 -07:00
Harvey Harrison 0561cf3dbf vmxnet3: fix typo setting confPA
It's a le64, not a le32, typo in one place only.

Noticed by sparse:
drivers/net/vmxnet3/vmxnet3_drv.c:2668:52: warning: incorrect type in assignment (different base types)
drivers/net/vmxnet3/vmxnet3_drv.c:2668:52:    expected restricted __le64 [usertype] confPA
drivers/net/vmxnet3/vmxnet3_drv.c:2668:52:    got restricted __le32 [usertype] <noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 15:52:32 -07:00
Harvey Harrison 81e8e5601f vmxnet3: annotate hwaddr members as __iomem pointers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 15:52:32 -07:00
Harvey Harrison 3843e5154c vmxnet3: remove set_flag_le{16,64} helpers
It's easier to just annotate the constants as little endian types and set/clear
the flags directly.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24 15:52:31 -07:00
stephen hemminger ae316bb57d vmxnet3: make bit twiddle routines inline
Gcc doesn't usually handle inline across compilation units, and the
functions don't have to be global in scope. Move the set/reset flag
functions int the existing vmxnet3 header.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:09:44 -07:00
Jesse Gross b738127dfb vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs.
Since vlan groups will soon be more of an implementation detail
for vlan devices, rename the constant to be descriptive of its
actual purpose.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:50 -07:00
Eric Dumazet bc8acf2c8c drivers/net: avoid some skb->ip_summed initializations
fresh skbs have ip_summed set to CHECKSUM_NONE (0)

We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers.

Introduce skb_checksum_none_assert() helper so that we keep this
assertion documented in driver sources.

Change most occurrences of :

skb->ip_summed = CHECKSUM_NONE;

by :

skb_checksum_none_assert(skb);

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02 19:06:22 -07:00
Bhavesh Davda 1f4b161284 net-next: Fix an overflow bug in vmxnet3 Tx descriptor
Fix an overflow bug in vmxnet3 Tx descriptor

This patch fixes a bug where a 16K buffer on a Tx descriptor was overflowing
into the 'gen' bit in the descriptor thereby corrupting the descriptor and
stalling the transmit ring.

Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Matthew Delco <delcoM@vmware.com>
Signed-off-by: Ronghua Zhang <ronghua@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25 17:06:52 -07:00
Shreyas Bhatewara 0bdc0d70c5 net-next: vmxnet3 fixes [5/5] Respect the interrupt type in VM configuration
Respect the interrupt type set in VM configuration.

When interrupt type is not auto, do not ignore the interrupt type set from
VM configuration.

Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19 13:15:50 -07:00
Shreyas Bhatewara d9a5f210c5 net-next: vmxnet3 fixes [4/5] Do not reset when the device is not opened
Hold rtnl_lock to get the right link state.

While asynchronously resetting the device, hold rtnl_lock to get the
right value from netif_running. If a reset is scheduled, and the device
goes thru close and open, it may happen that reset and open may run in
parallel. Holding rtnl_lock will avoid this.

Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19 13:15:50 -07:00
Shreyas Bhatewara 4a1745fc54 net-next: vmxnet3 fixes [3/5] Initialize link state at probe time
This change initializes the state of link at the time when driver is
loaded. The ethtool output for 'link detected' and 'link speed'
is thus valid even before the interface is brought up.

Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18 14:48:17 -07:00
Ronghua Zang 6929fe8a37 net-next: vmxnet3 fixes [2/5] Interrupt control bitmap
A new bit map 'intrCtrl' is introduced in the DriverShared area. The 
driver should update VMXNET3_IC_DISABLE_ALL bit before writing IMR.

Signed-off-by: Ronghua Zang <ronghua@vmware.com>
Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15 22:18:47 -07:00
Shreyas Bhatewara ca802447c0 net-next: fix LRO feature update in vmxnet3
Fix LRO feature update.

Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15 22:17:29 -07:00
Ben Hutchings cbf2d604a1 vmxnet3: Remove incorrect implementation of ethtool_ops::get_flags()
Only some netdev feature flags correspond directly to ethtool feature
flags.  ethtool_op_get_flags() does the right thing.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-30 14:09:36 -07:00
Stanislaw Gruszka d92be4b166 vmxnet3: fail when try to setup unsupported features
Return EOPNOTSUPP in ethtool_ops->set_flags.

Fix coding style while at it.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29 00:53:26 -07:00