Commit Graph

116 Commits

Author SHA1 Message Date
Stephen M. Cameron 01350d0553 [SCSI] hpsa: fix physical device lun and target numbering problem
If a physical device exposed to the OS by hpsa
is replaced (e.g. one hot plug tape drive is replaced
by another, or a tape drive is placed into "OBDR" mode
in which it acts like a CD-ROM device) and a rescan is
initiated, the replaced device will be added to the
SCSI midlayer with target and lun numbers set to -1.
After that, a panic is likely to ensue.  When a physical
device is replaced, the lun and target number should be
preserved.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-26 12:52:39 -07:00
Stephen M. Cameron 0b0e1d6cbc [SCSI] hpsa: fix problem that OBDR devices are not detected
The test to detect OBDR ("One Button Disaster Recovery")
cd-rom devices was comparing against uninitialized data.

Fixed by moving the test for the device to where the
inquiry data is collected, and uninitialized variable
altogether as it wasn't really being used.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-26 12:49:04 -07:00
Linus Torvalds 6c6e3b828b Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (71 commits)
  [SCSI] fcoe: cleanup cpu selection for incoming requests
  [SCSI] fcoe: add fip retry to avoid missing critical keep alive
  [SCSI] libfc: fix warn on in lport retry
  [SCSI] libfc: Remove the reference to FCP packet from scsi_cmnd in case of error
  [SCSI] libfc: cleanup sending SRR request
  [SCSI] libfc: two minor changes in comments
  [SCSI] libfc, fcoe: ignore rx frame with wrong xid info
  [SCSI] libfc: release exchg cache
  [SCSI] libfc: use FC_MAX_ERROR_CNT
  [SCSI] fcoe: remove unused ptype field in fcoe_rcv_info
  [SCSI] bnx2fc: Update copyright and bump version to 1.0.4
  [SCSI] bnx2fc: Tx BDs cache in write tasks
  [SCSI] bnx2fc: Do not arm CQ when there are no CQEs
  [SCSI] bnx2fc: hold tgt lock when calling cmd_release
  [SCSI] bnx2fc: Enable support for sequence level error recovery
  [SCSI] bnx2fc: HSI changes for tape
  [SCSI] bnx2fc: Handle REC_TOV error code from firmware
  [SCSI] bnx2fc: REC/SRR link service request and response handling
  [SCSI] bnx2fc: Support 'sequence cleanup' task
  [SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support partitions in storage
  ...
2011-07-30 08:36:02 -10:00
Stephen M. Cameron f6e76055ba [SCSI] hpsa: retry commands completing with status of UNSOLICITED_ABORT
In a shared SAS setup, target devices may be reset by one of
several hosts, and outstanding commands on that device will be
completed to corresponding hosts with status of UNSOLICITED_ABORT.
Such commands should be retried instead of being treated as i/o
errors.  Also fixed a nearby spelling error.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27 15:35:49 +04:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Stephen M. Cameron db111e18ec [SCSI] hpsa: fix potential overrun while memcpy'ing sense data
This memcpy:

   memcpy(cmd->sense_buffer, ei->SenseInfo,
	   ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
		   SCSI_SENSE_BUFFERSIZE :
		   ei->SenseLen);

The ei->SenseLen field is filled in by the Smart Array.  For requests to
logical drives, it will not exceed 32 bytes, so should be ok, but for physical
requests it depends on the target device, not the Smart Array.  It's conceivable
that this could exceed the 32 byte size of ei->SenseInfo.  In that case, the memcpy
would read past the end of ei->SenseInfo, copying data from the next command,
as if it were sense data, or, if it happened to be the very last command in the
block of allocated commands, could fall off the end of the allocated area and
crash.  I'm not aware of anyone ever encountering this behavior, but it could
conceivably happen.  This bug was found by Coverity.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 12:09:56 -05:00
Stephen M. Cameron c2dd32e026 [SCSI] hpsa: fix dma unmap error in hpsa_passthru_ioctl
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 12:09:53 -05:00
Joe Perches 7630abd0c6 [SCSI] hpsa: Change memset using sizeof(ptr) to sizeof(*ptr)
Not at all sure this is correct or appropriate to change,
but this seems odd.

Found via coccinelle script

@@
type T;
T* ptr;
expression E1;
@@

* memset(E1, 0, sizeof(ptr));

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:19:27 +04:00
Stephen M. Cameron fda38518f2 [SCSI] hpsa: add P2000 to list of shared SAS devices
Signed-off-by: Scott Teel <scott.stacy.teel@hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:09:41 +04:00
Stephen M. Cameron 4638078697 [SCSI] hpsa: do not attempt PCI power management reset method if we know it won't work.
Just go straight to the soft-reset method instead.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:08:09 +04:00
Stephen M. Cameron dfc2224828 [SCSI] hpsa: remove superfluous sleeps around reset code
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:07:50 +04:00
Stephen M. Cameron 64670ac870 [SCSI] hpsa: do soft reset if hard reset is broken
on driver load, if reset_devices is set, and the hard reset
attempts fail, try to bring up the controller to the point that
a command can be sent, and send it a soft reset command, then
after the reset undo whatever driver initialization was done to get
it to the point to take a command, and re-do it after the reset.

This is to get kdump to work on all the "non-resettable" controllers
(except 64xx controllers which can't be reset due to the potentially
shared cache module.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:07:28 +04:00
Stephen M. Cameron cf0b08d0cd [SCSI] hpsa: use new doorbell-bit-5 reset method
The bit-2-doorbell reset method seemed to cause (survivable) NMIs
on some systems and (unsurvivable) IOCK NMIs on some G7 servers.
Firmware guys implemented a new doorbell method to alleviate these
problems triggered by bit 5 of the doorbell register.  We want to
use it if it's available.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:07:01 +04:00
Stephen M. Cameron 9a41338e5b [SCSI] hpsa: remove atrophied hpsa_scsi_setup function
hpsa_scsi_setup at one time contained enough code to justify
its existence, but that time has passed.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:06:30 +04:00
Stephen M. Cameron 2b870cb300 [SCSI] hpsa: clarify messages around reset behavior
When waiting for the board to become "not ready"
don't print a message saying "waiting for board to
become ready" (possibly followed by a message saying
"failed waiting for board to become not ready".  Instead,
it should be "waiting for board to reset" and "failed
waiting for board to reset."

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:06:11 +04:00
Stephen M. Cameron 0ae01a32cb [SCSI] hpsa: factor out irq request code
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:05:20 +04:00
Stephen M. Cameron 2e9d1b3626 [SCSI] hpsa: factor out cmd pool allocation functions
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:05:03 +04:00
Stephen M. Cameron 580ada3c1e [SCSI] hpsa: do a better job of detecting controller reset failure
Detect failure of controller reset by noticing if the 32 bytes of
"driver version" we store on the hardware in the config table
fail to get zeroed out.  Previously we noticed if the controller
did not transition to "simple mode", but this did not detect reset
failure if the controller was already in simple mode prior to
the reset attempt (e.g. due to module parameter hpsa_simple_mode=1).

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:04:11 +04:00
Stephen M. Cameron 1fb011fb05 [SCSI] hpsa: remove unused parameter from hpsa_complete_scsi_command()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:03:14 +04:00
Stephen M. Cameron 941b1cdae8 [SCSI] hpsa: export resettable host attribute
This attribute, requested by Redhat, allows kexec-tools to know
whether the controller can honor the reset_devices kernel parameter
and actually reset the controller.  For kdump to work properly it
is necessary that the reset_devices parameter be honored.  This
attribute enables kexec-tools to warn the user if they attempt to
designate a non-resettable controller as the dump device.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 18:44:41 -05:00
Stephen M. Cameron 3f5eac3a04 [SCSI] hpsa: move device attributes to avoid forward declarations
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 18:40:20 -05:00
scameron@beardog.cce.hp.com 9143a96122 [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
My first attempt was botched, got the wrong PCI Device ID
(used PCI_DEVICE_ID_HP_CISSE, should have been PCI_DEVICE_ID_HP_CISSF)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 18:34:58 -05:00
Dan Carpenter 382be668c5 [SCSI] hpsa: fix bad comparison
'!' has higher precedence than '&'.  CFGTBL_ChangeReq is 0x1 so the
original code is equivelent to if (!doorbell_value) {...

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:34:38 -06:00
Stephen M. Cameron ba95e2ac6b [SCSI] hpsa: Do not attempt kdump if we detect resetting controller failed.
We can get completions left over from before the attempted reset which
will interfere with the kdump.  Better to just not make the attempt in
that case.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:34:14 -06:00
Stephen M. Cameron 960a30e7a7 [SCSI] hpsa: Inform controller we are using 32-bit tags.
Controller will transfer only 32-bits on completion if it
knows we are only using 32-bit tags.  Also, some newer controllers
apparently (and erroneously) require that we only use 32-bit tags,
and that we inform the controller of this.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:33:52 -06:00
Stephen M. Cameron 745a7a25bc [SCSI] hpsa: Add transport_mode host attribute in /sys
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:33:06 -06:00
Stephen M. Cameron a9a3a2739a [SCSI] hpsa: make hpsa.hpsa_simple_mode=1 module parameter actually work
It's not enough to simple avoid putting the board into performant
mode, as we have to set up the interrupts differently, etc.  When
I originally tested this module parameter, I tested it incorrectly
without realizing it, and the driver was running in performant mode
the whole time unbeknownst to me.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:32:30 -06:00
Stephen M. Cameron 9e0fc764ea [SCSI] hpsa: do not re-order commands in internal queues
Driver's internal queues should be FIFO, not LIFO.
This is a port of an almost identical patch from cciss by Jens Axboe.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:31:19 -06:00
Vasiliy Kulikov 938abd8449 [SCSI] hpsa: avoid leaking stack contents to userland
memset arg64 to zero in the passthrough ioctls to avoid leaking contents
of kernel stack memory to userland via uninitialized padding fields
inserted by the compiler for alignment reasons.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:34:05 -06:00
Stephen M. Cameron 1d5e2ed080 [SCSI] hpsa: Fix problem that CMD_UNABORTABLE command status was treated as unknown
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:33:54 -06:00
Stephen M. Cameron c4f8a299d0 [SCSI] hpsa: fix use of uninitialized variable in hpsa_add_msa2xxx_enclosure_device()
Thanks to Scott Teel for noticing this.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:33:32 -06:00
Stephen M. Cameron 94a136495a [SCSI] hpsa: Add a per controller commands_outstanding entry in /sys
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:31:10 -06:00
Stephen M. Cameron 60d3f5b068 [SCSI] hpsa: use usleep_range not msleep for small sleeps
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:30:56 -06:00
Stephen M. Cameron 02ec19c82e [SCSI] hpsa: allow driver to put controller in either simple or performant mode
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:30:43 -06:00
Stephen M. Cameron 6eaf46fdc7 [SCSI] hpsa: take the adapter lock in hpsa_wait_for_mode_change_ack
Need to take the lock while accessing the register to check to
see if config table changes have taken effect.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:30:26 -06:00
Stephen M. Cameron 25c1e56a04 [SCSI] hpsa: do not reset unknown boards on reset_devices
This is to prevent hpsa from resetting older boards
which the cciss driver may be controlling.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:30:11 -06:00
Stephen M. Cameron 72ceeaecb7 [SCSI] hpsa: limit commands allocated on reset_devices
This is to conserve memory in a memory-limited kdump scenario

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:29:58 -06:00
Stephen M. Cameron 270d05de2b [SCSI] hpsa: Use kernel provided PCI state save and restore functions
and use the doorbell reset method if available (which doesn't
lock up the controller if you properly save and restore all
the PCI registers that you're supposed to.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:29:46 -06:00
Stephen M. Cameron fe5389c87f [SCSI] hpsa: fix board status waiting code
After a reset, we should first wait for the board to become "not ready",
and then wait for it to become "ready", instead of immediately
waiting for it to become "ready", and do this waiting *after*
restoring PCI config space registers.  Also, only wait 10 secs
for board to become "not ready" after a reset (it should quickly
become not ready.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:29:32 -06:00
Stephen M. Cameron 922a9e4da3 [SCSI] hpsa: Remove duplicate defines of DIRECT_LOOKUP_ constants
They are defined in hpsa_cmd.h

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:29:19 -06:00
Stephen M. Cameron d896f3f3d1 [SCSI] hpsa: fixup DMA address before freeing.
Some low bits might have been set by the driver, causing
a message like this to come out:

 [   13.288062] ------------[ cut here ]------------
 [   13.293211] WARNING: at lib/dma-debug.c:803 check_unmap+0x1a1/0x654()
 [   13.300387] Hardware name: ProLiant DL180 G6
 [   13.305335] hpsa 0000:06:00.0: DMA-API: device driver tries to free
 DMA memory it has not allocated [device address=0x000000007f81e001]
 [size=640 bytes]

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:29:05 -06:00
Stephen M. Cameron b03a7771c8 [SCSI] hpsa: defend against zero sized buffers in passthru ioctls
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:28:48 -06:00
Stephen M. Cameron 35dd3039e0 [SCSI] hpsa: do not consider RAID level to be part of device identity
Otherwise, after doing a RAID level migration, the disk will be
disruptively removed and re-added as a different disk on rescan.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:37:27 -06:00
Stephen M. Cameron a0b89872b3 [SCSI] hpsa: do not consider firmware revision when looking for device changes.
The firmware may have been updated, in which case, it's the same device,
and in that case, we do not want to remove and add the device, we want to
let it continue as is.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:37:26 -06:00
Mike Miller 7c03b87048 [SCSI] hpsa: fix redefinition of PCI_DEVICE_ID_CISSF
PCI_DEVICE_ID_CISSF is defined as 323b in pci_ids.h but redefined as 3fff in
hpsa.c. The ID of 3fff will _never_ ship as a standalone controller. It is
intended only as part a complete storage solution. As such, this patch
removes the redefinition and the StorageWorks P1210m from the product table.

It also removes a duplicate line for the "unknown" controller support.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-09 15:06:50 -06:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Jeff Garzik f281233d3e SCSI host lock push-down
Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.

The patch below presents a simple SCSI host lock push-down as an
equivalent transformation.  No locking or other behavior should change
with this patch.  All existing bugs and locking orders are preserved.

Additionally, add one parameter to queuecommand,
	struct Scsi_Host *
and remove one parameter from queuecommand,
	void (*done)(struct scsi_cmnd *)

Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.

Minimal code disturbance was attempted with this change.  Most drivers
needed only two one-line modifications for their host lock push-down.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 13:33:23 -08:00
Stephen M. Cameron 36ed2176fe [SCSI] hpsa: disable doorbell reset on reset_devices
The doorbell reset initially appears to work correctly,
the controller resets, comes up, some i/o can even be
done, but on at least some Smart Arrays in some servers,
it eventually causes a subsequent controller lockup due
to some kind of PCIe error, and kdump can end up leaving
the root filesystem in an unbootable state.  For this
reason, until the problem is fixed, or at least isolated
to certain hardware enough to be avoided, the doorbell
reset should not be used at all.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-02 17:14:44 -03:00
Stephen M. Cameron cba3d38b6c [SCSI] hpsa: sanitize max commands
Some controllers might try to tell us they support 0 commands
in performant mode.  This is a lie told by buggy firmware.
We have to be wary of this lest we try to allocate a negative
number of command blocks, which will be treated as unsigned,
and get an out of memory condition.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:02:03 -05:00
Stephen M. Cameron 10f6601808 [SCSI] hpsa: separate intx and msi/msix interrupt handlers
There are things which need to be done in the intx
interrupt handler which do not need to be done in
the msi/msix interrupt handler, like checking that
the interrupt is actually for us, and checking that the
interrupt pending bit on the hardware is set (which we
weren't previously doing at all, which means old controllers
wouldn't work), so it makes sense to separate these into
two functions.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:02:03 -05:00