Commit Graph

5632 Commits

Author SHA1 Message Date
Geert Uytterhoeven dfa1942616 ipmi: Add missing rv in ipmi_parisc_probe()
Fix

  drivers/char/ipmi/ipmi_si_intf.c: In function 'ipmi_parisc_probe':
  drivers/char/ipmi/ipmi_si_intf.c:2752:2: error: 'rv' undeclared (first use in this function)
  drivers/char/ipmi/ipmi_si_intf.c:2752:2: note: each undeclared identifier is reported only once for each function it appears in

Introduced by commit d02b3709ff ("ipmi: Cleanup error return")

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30 10:02:54 -08:00
Linus Torvalds 9b0cd304f2 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Been a bit busy, first week of kids school, and waiting on other trees
  to go in before I could send this, so its a bit later than I'd
  normally like.

  Highlights:
   - core:
      timestamp fixes, lots of misc cleanups
   - new drivers:
      bochs virtual vga
   - vmwgfx:
      major overhaul for their nextgen virt gpu.
   - i915:
      runtime D3 on HSW, watermark fixes, power well work, fbc fixes,
      bdw is no longer prelim.
   - nouveau:
      gk110/208 acceleration, more pm groundwork, old overlay support
   - radeon:
      dpm rework and clockgating for CIK, pci config reset, big endian
      fixes
   - tegra:
      panel support and DSI support, build as module, prime.
   - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast:
      fixes
   - msm:
      hdmi support for mdp5"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits)
  drm/nouveau: resume display if any later suspend bits fail
  drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip
  drm/nouveau: implement hooks for needed for drm vblank timestamping support
  drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping
  drm/nv50: fill in crtc mode struct members from crtc_mode_fixup
  drm/radeon/dce8: workaround for atom BlankCrtc table
  drm/radeon/DCE4+: clear bios scratch dpms bit (v2)
  drm/radeon: set si_notify_smc_display_change properly
  drm/radeon: fix DAC interrupt handling on DCE5+
  drm/radeon: clean up active vram sizing
  drm/radeon: skip async dma init on r6xx
  drm/radeon/runpm: don't runtime suspend non-PX cards
  drm/radeon: add ring to fence trace functions
  drm/radeon: add missing trace point
  drm/radeon: fix VMID use tracking
  drm: ast,cirrus,mgag200: use drm_can_sleep
  drm/gma500: Lock struct_mutex around cursor updates
  drm/i915: Fix the offset issue for the stolen GEM objects
  DRM: armada: fix missing DRM_KMS_FB_HELPER select
  drm/i915: Decouple GPU error reporting from ring initialisation
  ...
2014-01-29 20:49:12 -08:00
Linus Torvalds 9076e0cae7 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull hwmon updates from Jean Delvare:
 "This include it87 driver improvements, and a tree-wide change of my
  e-mail address"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  Update Jean Delvare's e-mail address
  hwmon: (it87) Print proper names for the IT8771E and IT8772E
  hwmon: (it87) Add support for the ITE IT8603E
2014-01-29 18:56:27 -08:00
Jean Delvare 7c81c60f37 Update Jean Delvare's e-mail address
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 20:40:08 +01:00
Linus Torvalds b2e448eca1 Merge branch 'ipmi' (ipmi patches from Corey Minyard)
Merge ipmi fixes from Corey Minyard:
 "Just some collected fixes for 3.14.  Nothing huge"

* emailed patches from Corey Minyard <minyard@acm.org>:
  ipmi: Cleanup error return
  ipmi: fix timeout calculation when bmc is disconnected
  ipmi: use USEC_PER_SEC instead of 1000000 for more meaningful
  ipmi: remove deprecated IRQF_DISABLED
2014-01-25 15:33:41 -08:00
Corey Minyard d02b3709ff ipmi: Cleanup error return
Return proper errors for a lot of IPMI failure cases.  Also call
pci_disable_device when IPMI PCI devices are removed.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-25 15:31:58 -08:00
Xie XiuQi e21404dc0a ipmi: fix timeout calculation when bmc is disconnected
Loading ipmi_si module while bmc is disconnected, we found the timeout
is longer than 5 secs.  Actually it takes about 3 mins and 20
secs.(HZ=250)

error message as below:
  Dec 12 19:08:59 linux kernel: IPMI BT: timeout in RD_WAIT [ ] 1 retries left
  Dec 12 19:08:59 linux kernel: BT: write 4 bytes seq=0x01 03 18 00 01
  [...]
  Dec 12 19:12:19 linux kernel: IPMI BT: timeout in RD_WAIT [ ]
  Dec 12 19:12:19 linux kernel: failed 2 retries, sending error response
  Dec 12 19:12:19 linux kernel: IPMI: BT reset (takes 5 secs)
  Dec 12 19:12:19 linux kernel: IPMI BT: flag reset [ ]

Function wait_for_msg_done() use schedule_timeout_uninterruptible(1) to
sleep 1 tick, so we should subtract jiffies_to_usecs(1) instead of 100
usecs from timeout.

Reported-by: Hu Shiyuan <hushiyuan@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-25 15:31:58 -08:00
Xie XiuQi ccb3368cb4 ipmi: use USEC_PER_SEC instead of 1000000 for more meaningful
Use USEC_PER_SEC instead of 1000000, that making the later bugfix
more clearly.

Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-25 15:31:58 -08:00
Michael Opdenacker aa5b2bab9c ipmi: remove deprecated IRQF_DISABLED
This patch proposes to remove the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-25 15:31:58 -08:00
Linus Torvalds 09da8dfa98 ACPI and power management updates for 3.14-rc1
- ACPI core changes to make it create a struct acpi_device object for every
    device represented in the ACPI tables during all namespace scans regardless
    of the current status of that device.  In accordance with this, ACPI hotplug
    operations will not delete those objects, unless the underlying ACPI tables
    go away.
 
  - On top of the above, new sysfs attribute for ACPI device objects allowing
    user space to check device status by triggering the execution of _STA for
    its ACPI object.  From Srinivas Pandruvada.
 
  - ACPI core hotplug changes reducing code duplication, integrating the
    PCI root hotplug with the core and reworking container hotplug.
 
  - ACPI core simplifications making it use ACPI_COMPANION() in the code
    "glueing" ACPI device objects to "physical" devices.
 
  - ACPICA update to upstream version 20131218.  This adds support for the
    DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
    facilities.  From Bob Moore, Lv Zheng and Betty Dall.
 
  - Init code change to carry out the early ACPI initialization earlier.
    That should allow us to use ACPI during the timekeeping initialization
    and possibly to simplify the EFI initialization too.  From Chun-Yi Lee.
 
  - Clenups of the inclusions of ACPI headers in many places all over from
    Lv Zheng and Rashika Kheria (work in progress).
 
  - New helper for ACPI _DSM execution and rework of the code in drivers
    that uses _DSM to execute it via the new helper.  From Jiang Liu.
 
  - New Win8 OSI blacklist entries from Takashi Iwai.
 
  - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
    Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
    Tang Chen, Zhang Rui.
 
  - intel_pstate driver updates, including proper Baytrail support, from
    Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
 
  - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
 
  - powernow-k6 cpufreq driver fixes from Mikulas Patocka.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
 
  - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
    Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
 
  - cpuidle cleanups from Bartlomiej Zolnierkiewicz.
 
  - Support for hibernation APM events from Bin Shi.
 
  - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
    during thaw transitions from Bjørn Mork.
 
  - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
 
  - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
    Rashika Kheria.
 
  - New tool for profiling system suspend from Todd E Brandt and a cpupower
    tool cleanup from One Thousand Gnomes.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJS3a1eAAoJEILEb/54YlRxnTgP/iGawvgjKWm6Qqp7WSIvd5gQ
 zZ6q75C6Pc/W2fq1+OzVGnpCF8WYFy+nFDAXOvUHjIXuoxSwFcuW5l4aMckgl/0a
 TXEWe9MJrCHHRfDApfFacCJ44U02bjJAD5vTyL/hKA+IHeinq4WCSojryYC+8jU0
 cBrUIV0aNH8r5JR2WJNAyv/U29rXsDUOu0I4qTqZ4YaZT6AignMjtLXn1e9AH1Pn
 DPZphTIo/HMnb+kgBOjt4snMk+ahVO9eCOxh/hH8ecnWExw9WynXoU5Nsna0tSZs
 ssyHC7BYexD3oYsG8D52cFUpp4FCsJ0nFQNa2kw0LY+0FBNay43LySisKYHZPXEs
 2WpESDv+/t7yhtnrvM+TtA7aBheKm2XMWGFSu/aERLE17jIidOkXKH5Y7ryYLNf/
 uyRKxNS0NcZWZ0G+/wuY02jQYNkfYz3k/nTr8BAUItRBjdporGIRNEnR9gPzgCUC
 uQhjXWMPulqubr8xbyefPWHTEzU2nvbXwTUWGjrBxSy8zkyy5arfqizUj+VG6afT
 NsboANoMHa9b+xdzigSFdA3nbVK6xBjtU6Ywntk9TIpODKF5NgfARx0H+oSH+Zrj
 32bMzgZtHw/lAbYsnQ9OnTY6AEWQYt6NMuVbTiLXrMHhM3nWwfg/XoN4nZqs6jPo
 IYvE6WhQZU6L6fptGHFC
 =dRf6
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "As far as the number of commits goes, the top spot belongs to ACPI
  this time with cpufreq in the second position and a handful of PM
  core, PNP and cpuidle updates.  They are fixes and cleanups mostly, as
  usual, with a couple of new features in the mix.

  The most visible change is probably that we will create struct
  acpi_device objects (visible in sysfs) for all devices represented in
  the ACPI tables regardless of their status and there will be a new
  sysfs attribute under those objects allowing user space to check that
  status via _STA.

  Consequently, ACPI device eject or generally hot-removal will not
  delete those objects, unless the table containing the corresponding
  namespace nodes is unloaded, which is extremely rare.  Also ACPI
  container hotplug will be handled quite a bit differently and cpufreq
  will support CPU boost ("turbo") generically and not only in the
  acpi-cpufreq driver.

  Specifics:

   - ACPI core changes to make it create a struct acpi_device object for
     every device represented in the ACPI tables during all namespace
     scans regardless of the current status of that device.  In
     accordance with this, ACPI hotplug operations will not delete those
     objects, unless the underlying ACPI tables go away.

   - On top of the above, new sysfs attribute for ACPI device objects
     allowing user space to check device status by triggering the
     execution of _STA for its ACPI object.  From Srinivas Pandruvada.

   - ACPI core hotplug changes reducing code duplication, integrating
     the PCI root hotplug with the core and reworking container hotplug.

   - ACPI core simplifications making it use ACPI_COMPANION() in the
     code "glueing" ACPI device objects to "physical" devices.

   - ACPICA update to upstream version 20131218.  This adds support for
     the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
     debug facilities.  From Bob Moore, Lv Zheng and Betty Dall.

   - Init code change to carry out the early ACPI initialization
     earlier.  That should allow us to use ACPI during the timekeeping
     initialization and possibly to simplify the EFI initialization too.
     From Chun-Yi Lee.

   - Clenups of the inclusions of ACPI headers in many places all over
     from Lv Zheng and Rashika Kheria (work in progress).

   - New helper for ACPI _DSM execution and rework of the code in
     drivers that uses _DSM to execute it via the new helper.  From
     Jiang Liu.

   - New Win8 OSI blacklist entries from Takashi Iwai.

   - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
     Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
     Rashika Kheria, Tang Chen, Zhang Rui.

   - intel_pstate driver updates, including proper Baytrail support,
     from Dirk Brandewie and intel_pstate documentation from Ramkumar
     Ramachandra.

   - Generic CPU boost ("turbo") support for cpufreq from Lukasz
     Majewski.

   - powernow-k6 cpufreq driver fixes from Mikulas Patocka.

   - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
     Brown.

   - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
     Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
     Kumar.

   - cpuidle cleanups from Bartlomiej Zolnierkiewicz.

   - Support for hibernation APM events from Bin Shi.

   - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
     disabled during thaw transitions from Bjørn Mork.

   - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
     Hansson.

   - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
     Kurusa, Rashika Kheria.

   - New tool for profiling system suspend from Todd E Brandt and a
     cpupower tool cleanup from One Thousand Gnomes"

* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
  thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
  cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
  Documentation: cpufreq / boost: Update BOOST documentation
  cpufreq: exynos: Extend Exynos cpufreq driver to support boost
  cpufreq / boost: Kconfig: Support for software-managed BOOST
  acpi-cpufreq: Adjust the code to use the common boost attribute
  cpufreq: Add boost frequency support in core
  intel_pstate: Add trace point to report internal state.
  cpufreq: introduce cpufreq_generic_get() routine
  ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
  cpufreq: stats: create sysfs entries when cpufreq_stats is a module
  cpufreq: stats: free table and remove sysfs entry in a single routine
  cpufreq: stats: remove hotplug notifiers
  cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
  cpufreq: speedstep: remove unused speedstep_get_state
  platform: introduce OF style 'modalias' support for platform bus
  PM / tools: new tool for suspend/resume performance optimization
  ACPI: fix module autoloading for ACPI enumerated devices
  ACPI: add module autoloading support for ACPI enumerated devices
  ACPI: fix create_modalias() return value handling
  ...
2014-01-24 15:51:02 -08:00
Linus Torvalds 84621c9b18 Features:
- FIFO event channels. Key advantages: support for over 100,000 events (2^17),
    16 different event priorities, improved fairness in event latency through
    the use of FIFOs.
  - Xen PVH support. "It’s a fully PV kernel mode, running with paravirtualized
    disk and network, paravirtualized interrupts and timers, no emulated devices
    of any kind (and thus no qemu), no BIOS or legacy boot — but instead of
    requiring PV MMU, it uses the HVM hardware extensions to virtualize the
    pagetables, as well as system calls and other privileged operations."
    (from "The Paravirtualization Spectrum, Part 2: From poles to a spectrum")
 Bug-fixes:
  - Fixes in balloon driver (refactor and make it work under ARM)
  - Allow xenfb to be used in HVM guests.
  - Allow xen_platform_pci=0 to work properly.
  - Refactors in event channels.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJS4BmLAAoJEFjIrFwIi8fJ4SAH/iNGESowgMhfW64vRA8pBWq+
 NRJpUjYjjwmbxpwoNl6NPwn15cIXFyc3sMtvvrDD3taRDyko2RFuT+NTjpO05xPh
 d/cRpRXpXERHoiFgPf/WTp7ONBDhvPtHG0+BzJKwgqEIOUYXdbhD+gEjaVlFJScS
 CAY68OLmk7XYMSZBNzPfKNbSCyhVgZF7wpaimK9lxZBKsFRCDIq6jIyrAsC8epIL
 6V/V4l2S6lk/uUeGB6ULphYeINjI2kkpbSfCd1vyenLfWpVscc2o8uWEYFcZMAxy
 V4HpsoseuqrfdDqgPfud3VgogdISvbkCvDfW85rzfDP4MWxei2mVHFtJ/gSBV+g=
 =ToNG
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen updates from Konrad Rzeszutek Wilk:
 "Two major features that Xen community is excited about:

  The first is event channel scalability by David Vrabel - we switch
  over from an two-level per-cpu bitmap of events (IRQs) - to an FIFO
  queue with priorities.  This lets us be able to handle more events,
  have lower latency, and better scalability.  Good stuff.

  The other is PVH by Mukesh Rathor.  In short, PV is a mode where the
  kernel lets the hypervisor program page-tables, segments, etc.  With
  EPT/NPT capabilities in current processors, the overhead of doing this
  in an HVM (Hardware Virtual Machine) container is much lower than the
  hypervisor doing it for us.

  In short we let a PV guest run without doing page-table, segment,
  syscall, etc updates through the hypervisor - instead it is all done
  within the guest container.  It is a "hybrid" PV - hence the 'PVH'
  name - a PV guest within an HVM container.

  The major benefits are less code to deal with - for example we only
  use one function from the the pv_mmu_ops (which has 39 function
  calls); faster performance for syscall (no context switches into the
  hypervisor); less traps on various operations; etc.

  It is still being baked - the ABI is not yet set in stone.  But it is
  pretty awesome and we are excited about it.

  Lastly, there are some changes to ARM code - you should get a simple
  conflict which has been resolved in #linux-next.

  In short, this pull has awesome features.

  Features:
   - FIFO event channels.  Key advantages: support for over 100,000
     events (2^17), 16 different event priorities, improved fairness in
     event latency through the use of FIFOs.
   - Xen PVH support.  "It’s a fully PV kernel mode, running with
     paravirtualized disk and network, paravirtualized interrupts and
     timers, no emulated devices of any kind (and thus no qemu), no BIOS
     or legacy boot — but instead of requiring PV MMU, it uses the HVM
     hardware extensions to virtualize the pagetables, as well as system
     calls and other privileged operations." (from "The
     Paravirtualization Spectrum, Part 2: From poles to a spectrum")

  Bug-fixes:
   - Fixes in balloon driver (refactor and make it work under ARM)
   - Allow xenfb to be used in HVM guests.
   - Allow xen_platform_pci=0 to work properly.
   - Refactors in event channels"

* tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (52 commits)
  xen/pvh: Set X86_CR0_WP and others in CR0 (v2)
  MAINTAINERS: add git repository for Xen
  xen/pvh: Use 'depend' instead of 'select'.
  xen: delete new instances of __cpuinit usage
  xen/fb: allow xenfb initialization for hvm guests
  xen/evtchn_fifo: fix error return code in evtchn_fifo_setup()
  xen-platform: fix error return code in platform_pci_init()
  xen/pvh: remove duplicated include from enlighten.c
  xen/pvh: Fix compile issues with xen_pvh_domain()
  xen: Use dev_is_pci() to check whether it is pci device
  xen/grant-table: Force to use v1 of grants.
  xen/pvh: Support ParaVirtualized Hardware extensions (v3).
  xen/pvh: Piggyback on PVHVM XenBus.
  xen/pvh: Piggyback on PVHVM for grant driver (v4)
  xen/grant: Implement an grant frame array struct (v3).
  xen/grant-table: Refactor gnttab_init
  xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init.
  xen/pvh: Piggyback on PVHVM for event channels (v2)
  xen/pvh: Update E820 to work with PVH (v2)
  xen/pvh: Secondary VCPU bringup (non-bootup CPUs)
  ...
2014-01-22 22:00:18 -08:00
Linus Torvalds bb1281f2aa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science stuff from trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  neighbour.h: fix comment
  sched: Fix warning on make htmldocs caused by wait.h
  slab: struct kmem_cache is protected by slab_mutex
  doc: Fix typo in USB Gadget Documentation
  of/Kconfig: Spelling s/one/once/
  mkregtable: Fix sscanf handling
  lp5523, lp8501: comment improvements
  thermal: rcar: comment spelling
  treewide: fix comments and printk msgs
  IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart()
  Documentation: update /proc/uptime field description
  Documentation: Fix size parameter for snprintf
  arm: fix comment header and macro name
  asm-generic: uaccess: Spelling s/a ny/any/
  mtd: onenand: fix comment header
  doc: driver-model/platform.txt: fix a typo
  drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text
  doc: Fix typo (acces_process_vm -> access_process_vm)
  treewide: Fix typos in printk
  drivers/gpu/drm/qxl/Kconfig: reformat the help text
  ...
2014-01-22 21:21:55 -08:00
Linus Torvalds e1ba84597c PCI changes for the v3.14 merge window:
Resource management
     - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
     - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
     - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
     - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
     - Enforce bus address limits in resource allocation (Yinghai Lu)
     - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
     - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)
 
   PCI device hotplug
     - Major rescan/remove locking update (Rafael J. Wysocki)
     - Make ioapic builtin only (not modular) (Yinghai Lu)
     - Fix release/free issues (Yinghai Lu)
     - Clean up pciehp (Bjorn Helgaas)
     - Announce pciehp slot info during enumeration (Bjorn Helgaas)
 
   MSI
     - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
     - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
     - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
     - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
     - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)
 
   SR-IOV
     - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)
 
   Virtualization
     - Add support for save/restore of extended capabilities (Alex Williamson)
     - Add Virtual Channel to save/restore support (Alex Williamson)
     - Never treat a VF as a multifunction device (Alex Williamson)
     - Add pci_try_reset_function(), et al (Alex Williamson)
 
   AER
     - Ignore non-PCIe error sources (Betty Dall)
     - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
     - Consolidate HEST error source parsers (Bjorn Helgaas)
     - Add a TLP header print helper (Borislav Petkov)
 
   Freescale i.MX6
     - Remove unnecessary code (Fabio Estevam)
     - Make reset-gpio optional (Marek Vasut)
     - Report "link up" only after link training completes (Marek Vasut)
     - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
     - Fix PCIe startup code (Richard Zhu)
 
   Marvell MVEBU
     - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
     - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
     - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
     - Support a bridge with no IO port window (Jason Gunthorpe)
     - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
     - Remove redundant of_match_ptr (Sachin Kamat)
     - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)
 
   NVIDIA Tegra
     - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)
 
   Renesas R-Car
     - Add runtime PM support (Valentine Barshak)
     - Fix rcar_pci_probe() return value check (Wei Yongjun)
 
   Synopsys DesignWare
     - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
     - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
     - Fix missing MSI IRQs (Harro Haan)
     - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
     - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
     - Whitespace cleanup (Jingoo Han)
 
   EISA
     - Call put_device() if device_register() fails (Levente Kurusa)
     - Revert EISA initialization breakage ((Bjorn Helgaas)
 
   Miscellaneous
     - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
     - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
     - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
     - Use dev_is_pci() to identify PCI devices (Yijing Wang)
     - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
     - Update documentation 00-INDEX (Erik Ekman)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3ujEAAoJEFmIoMA60/r8A4EQAK9AZSUSVNWvlKdC1PrBfT3w
 7fVILx5A4KWsOU8eoFwCPQLrgvUtMltg16yN2tbCjqpKEdrVc36biMO9bwhnXSyZ
 KopHKMWnn0sza/z2H8mcGy+0azGdWcIjcErX/a8WeS6zyWBjm+yzckrHNVpPu4Ca
 SpCBhfgBMjKyIZyLtP6juFSH34S2DfQex4oUSyPC+gjqPy5wW/xw/kBxZfOXl+yU
 P9pQT+geMIc31pETMdG9wd/TT+47YAui4ieSggoVxfVrphCXv6S8mOMCMuQc2bAy
 MHy9uFm1jbvKZZIYrzJ+9HFiiU/6MNiOO3Ygua52xuSp1Zrcjwi2CLD9/QBXbDVs
 pTKU5JIO7q43llkQUpIXTwBvEApSZRhuqzXegsMAYIg4AWmbfm/2fXkfWlQThYMp
 J48blAJZ4t0vhMr9usgwbtdBe8F5euExOxpwH0QMCMABbuu8/B3TLm39+LTcIbsw
 Efgm3N9iUTyiV5fe9Rr62nflhyqXjTevPl4wbZZe4OOdm0MXZY+/BzuNJhg3wyY8
 QKz2J3FB6OR7BCLHCp80l50s5+Ih4F5kmOXwFKjT1D1MFRaNaPDmp9BY6TitU6hg
 zj55gP4c8x6n3alakbf972Yhgs/4oi1va8cZL+pCYWb8nPO5ldaMiT7QBBLUreQV
 BtDtC7u/AFWJ5e73+jVO
 =La1R
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...
2014-01-22 16:39:28 -08:00
Grygorii Strashko 869a84e1ca mm/memblock: remove unnecessary inclusions of bootmem.h
Clean-up to remove depedency with bootmem headers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:46 -08:00
Linus Torvalds fb2e2c8537 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
 "Changes for this kernel include maintenance updates for Smack, SELinux
  (and several networking fixes), IMA and TPM"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits)
  SELinux: Fix memory leak upon loading policy
  tpm/tpm-sysfs: active_show() can be static
  tpm: tpm_tis: Fix compile problems with CONFIG_PM_SLEEP/CONFIG_PNP
  tpm: Make tpm-dev allocate a per-file structure
  tpm: Use the ops structure instead of a copy in tpm_vendor_specific
  tpm: Create a tpm_class_ops structure and use it in the drivers
  tpm: Pull all driver sysfs code into tpm-sysfs.c
  tpm: Move sysfs functions from tpm-interface to tpm-sysfs
  tpm: Pull everything related to /dev/tpmX into tpm-dev.c
  char: tpm: nuvoton: remove unused variable
  tpm: MAINTAINERS: Cleanup TPM Maintainers file
  tpm/tpm_i2c_atmel: fix coccinelle warnings
  tpm/tpm_ibmvtpm: fix unreachable code warning (smatch warning)
  tpm/tpm_i2c_stm_st33: Check return code of get_burstcount
  tpm/tpm_ppi: Check return value of acpi_get_name
  tpm/tpm_ppi: Do not compare strcmp(a,b) == -1
  ima: remove unneeded size_limit argument from ima_eventdigest_init_common()
  ima: update IMA-templates.txt documentation
  ima: pass HASH_ALGO__LAST as hash algo in ima_eventdigest_init()
  ima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init()
  ...
2014-01-21 09:06:02 -08:00
Linus Torvalds bcee63488e TTY/Serial driver patches for 3.14-rc1
Here's the big tty/serial driver pull request for 3.14-rc1
 
 There are a number of n_tty fixes and cleanups, and some serial driver
 bugfixes, and we got rid of one obsolete driver, making this series
 remove more lines than added, always a nice surprise.
 
 All of these have been in linux-next with no reports of issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlLdiiAACgkQMUfUDdst+ymInACgu+gjm0q6sua8Zsk9HN3Ko0jK
 Zy0AoI7jieqSxZfvZD84US98HTiWtumH
 =z6GV
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here's the big tty/serial driver pull request for 3.14-rc1

  There are a number of n_tty fixes and cleanups, and some serial driver
  bugfixes, and we got rid of one obsolete driver, making this series
  remove more lines than added, always a nice surprise.

  All of these have been in linux-next with no reports of issues"

* tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
  tty/serial: at91: disable uart timer at start of shutdown
  serial: 8250: enable UART_BUG_NOMSR for Tegra
  tty/serial: at91: reset rx_ring when port is shutdown
  tty/serial: at91: fix race condition in atmel_serial_remove
  tty/serial: at91: Handle shutdown more safely
  serial: sirf: correct condition for fetching dma buffer into tty
  serial: sirf: provide pm entries of uart_ops
  serial: sirf: use PM macro initialize PM functions
  serial: clps711x: Enable driver compilation with COMPILE_TEST
  serial: clps711x: Add support for N_IRDA line discipline
  tty: synclink: avoid sleep_on race
  tty/amiserial: avoid interruptible_sleep_on
  tty: delete non-required instances of include <linux/init.h>
  tty: an overflow of multiplication in drivers/tty/cyclades.c
  serial: Remove old SC26XX driver
  serial: add support for 200 v3 series Titan card
  serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip
  tty: Removing the deprecated function tty_vhangup_locked()
  TTY/n_gsm: Removing the wrong tty_unlock/lock() in gsm_dlci_release()
  tty/serial: at91: document clock properties
  ...
2014-01-20 16:05:23 -08:00
Linus Torvalds 9f67627a0f Char/Misc driver patches for 3.14-rc1
Here's the big char/misc driver patches for 3.14-rc1.
 
 Lots of little things, and a new "big" driver, genwqe.  Full details are
 in the shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlLdgc8ACgkQMUfUDdst+ynt9ACguAhrO2WlowdcUZELadTEpqLX
 gbkAn0+c1rjizVdIRvs83aQRNJP6w1uR
 =oPmD
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg KH:
 "Here's the big char/misc driver patches for 3.14-rc1.

  Lots of little things, and a new "big" driver, genwqe.  Full details
  are in the shortlog"

* tag 'char-misc-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  mei: limit the number of consecutive resets
  mei: revamp mei reset state machine
  drivers/char: don't use module_init in non-modular ttyprintk.c
  VMCI: fix error handling path when registering guest driver
  extcon: gpio: Add power resume support
  Documentation: HOWTO: Updates on subsystem trees, patchwork, -next (vs. -mm) in ko_KR
  Documentation: HOWTO: update for 2.6.x -> 3.x versioning in ko_KR
  Documentation: HOWTO: update stable address in ko_KR
  Documentation: HOWTO: update LXR web link in ko_KR
  char: nwbutton: open-code interruptible_sleep_on
  mei: fix syntax in comments and debug output
  mei: nfc: mei_nfc_free has to be called under lock
  mei: use hbm idle state to prevent spurious resets
  mei: do not run reset flow from the interrupt thread
  misc: genwqe: fix return value check in genwqe_device_create()
  GenWQE: Fix warnings for sparc
  GenWQE: Fix compile problems for Alpha
  Documentation/misc-devices/mei/mei-amt-version.c: remove unneeded call of mei_deinit()
  GenWQE: Rework return code for flash-update ioctl
  sgi-xp: open-code interruptible_sleep_on_timeout
  ...
2014-01-20 15:48:19 -08:00
Daniel Vetter 0d9d349d87 Merge commit origin/master into drm-intel-next
Conflicts are getting out of hand, and now we have to shuffle even
more in -next which was also shuffled in -fixes (the call for
drm_mode_config_reset needs to move yet again).

So do a proper backmerge. I wanted to wait with this for the 3.13
relaese, but alas let's just do this now.

Conflicts:
	drivers/gpu/drm/i915/i915_reg.h
	drivers/gpu/drm/i915/intel_ddi.c
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_pm.c

Besides the conflict around the forcewake get/put (where we chaged the
called function in -fixes and added a new parameter in -next) code all
the current conflicts are of the adjacent lines changed type.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-16 22:06:30 +01:00
Paul Gortmaker db50d2f65b drivers/char: don't use module_init in non-modular ttyprintk.c
The TTY_PRINTK option is bool, and hence this code is either
present or absent.  It will never be modular, so using
module_init as an alias for __initcall is rather misleading.

Fix this up now, so that we can relocate module_init from
init.h into module.h in the future.  If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.

Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups.  As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- it will remain at level 6 in initcall ordering.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13 14:57:20 -08:00
Rafael J. Wysocki 4ff913373a Merge branches 'pm-sleep', 'pm-runtime' and 'pm-apm'
* pm-sleep:
  PM / hibernate: Call platform_leave() in suspend path too
  PM / Sleep: Add macro to define common late/early system PM callbacks
  PM / hibernate: export hibernation_set_ops

* pm-runtime:
  PM / Runtime: Implement the pm_generic_runtime functions for CONFIG_PM
  PM / Runtime: Add second macro for definition of runtime PM callbacks

* pm-apm:
  apm-emulation: add hibernation APM events to support suspend2disk
2014-01-12 23:50:03 +01:00
Rafael J. Wysocki fbb9c10d40 Merge branch 'acpi-dsm'
* acpi-dsm:
  ACPI / extlog: replace open-coded _DSM code with helper functions
  ACPI / nouveau: replace open-coded _DSM code with helper functions
  nouveau / ACPI: fix memory leak in ACPI _DSM related code
  ACPI / i915: replace open-coded _DSM code with helper functions
  ACPI / i2c-hid: replace open-coded _DSM code with helper functions
  ACPI / TPM: detect PPI features by checking availability of _DSM functions
  ACPI / TPM: replace open-coded _DSM code with helper functions
  ACPI / TPM: match node name instead of full path when searching for TPM device
  PCI / pci-label: treat PCI label with index 0 as valid label
  ACPI / PCI: replace open-coded _DSM code with helper functions
  PCI / pci-label: release allocated ACPI object on error recovery path
  ACPI: introduce helper interfaces for _DSM method
2014-01-12 23:45:52 +01:00
Rafael J. Wysocki 98feb7cc61 Merge branch 'acpi-cleanup'
* acpi-cleanup: (22 commits)
  ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment.
  ACPI / tables: Check if id is NULL in acpi_table_parse()
  ACPI / proc: Include appropriate header file in proc.c
  ACPI / EC: Remove unused functions and add prototype declaration in internal.h
  ACPI / dock: Include appropriate header file in dock.c
  ACPI / PCI: Include appropriate header file in pci_link.c
  ACPI / PCI: Include appropriate header file in pci_slot.c
  ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c
  ACPI / NVS: Include appropriate header file in nvs.c
  ACPI / OSL: Mark the function acpi_table_checksum() as static
  ACPI / processor: initialize a variable to silence compiler warning
  ACPI / processor: use ACPI_COMPANION() to get ACPI device
  ACPI: correct minor typos
  ACPI / sleep: Drop redundant acpi_disabled check
  ACPI / dock: Drop redundant acpi_disabled check
  ACPI / table: Replace '1' with specific error return values
  ACPI: remove trailing whitespace
  ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module
  ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h>
  SFI / ACPI: Fix warnings reported during builds with W=1
  ...

Conflicts:
	drivers/acpi/nvs.c
	drivers/hwmon/asus_atk0110.c
2014-01-12 23:44:09 +01:00
Rafael J. Wysocki 6a1c64cb40 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm into pm-apm-next
Pull APM update for 3.14-rc1 from Jiri Kosina.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm:
  apm-emulation: add hibernation APM events to support suspend2disk
2014-01-11 01:08:35 +01:00
Arnd Bergmann eb831743f2 char: nwbutton: open-code interruptible_sleep_on
The nwbutton driver uses interruptible_sleep_on to wait for buttons
getting pressed after we enter the read() function, which is inherently
racy and cannot be fixed by using wait_event without changing the
driver's user space interface.

Instead, this patch just uses an open-coded variant of the same
interruptible_sleep_on() call, so the driver behavior doesn't change
but we remove the sleep_on family from the kernel.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08 15:29:52 -08:00
Arnd Bergmann b8c98ae49e tty: synclink: avoid sleep_on race
The four variants of the synclink driver use the same code in their
open() callback to wait for a port in process of being closed,
using interruptible_sleep_on, which is racy and going away soon.

Making things worse, these functions hold the BTM while doing so,
which means that if we ever enter this code path, we cannot actually
continue since the other thread that is in process of closing the
port can no longer get the BTM.

This addresses both issues by using wait_event_interruptible_tty()
instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07 17:05:21 -08:00
Bjorn Helgaas 167b1f0490 agp/ati: Use PCI_COMMAND instead of hard-coded 4
We're accessing the PCI_COMMAND register here, so use the appropriate
#define.  The bit we're writing (1 << 14) isn't defined by the PCI or PCIe
spec, so we don't have a name for it.

No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-07 11:37:27 -07:00
Bjorn Helgaas d357253299 agp/intel: Use CPU physical address, not bus address, for ioremap()
In i810_setup(), i830_setup(), and i9xx_setup(), we use the result of
pci_bus_address() as an argument to ioremap() and to compute gtt_phys_addr.
These should use pci_resource_start() instead because we want the CPU
physical address, not the bus address.

If there were an AGP device behind a host bridge that translated addresses,
e.g., a PNP0A08 device with _TRA != 0, this would fix a bug.  I'm not aware
of any of those, but they are possible.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07 11:37:18 -07:00
Bjorn Helgaas b5e350f919 agp/intel: Use pci_bus_address() to get GTTADR bus address
Per the Intel 915G/915GV/... Chipset spec (document number 301467-005),
GTTADR is a standard PCI BAR.

The PCI core reads GTTADR at enumeration-time.  Use pci_bus_address()
instead of reading it again in the driver.  This works correctly for both
32-bit and 64-bit BARs.  The spec above only mentions 32-bit GTTADR, but we
should still use the standard interface.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07 11:37:12 -07:00
Bjorn Helgaas 5ef6d8f495 agp/intel: Use pci_bus_address() to get MMADR bus address
Per the Intel 915G/915GV/... Chipset spec (document number 301467-005),
MMADR is a standard PCI BAR.

The PCI core reads MMADR at enumeration-time.  Use pci_bus_address()
instead of reading it again in the driver.  This works correctly for both
32-bit and 64-bit BARs.  The spec above only mentions 32-bit MMADR, but we
should still use the standard interface.

Also, stop clearing the low 19 bits of the bus address because it's invalid
to use addresses outside the region defined by the BAR.  The spec claims
MMADR is 512KB; if that's the case, those bits will be zero anyway.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07 11:37:06 -07:00
Yinghai Lu 545b0a746b agp/intel: Support 64-bit GMADR
Per the Intel 915G/915GV/... Chipset spec (document number 301467-005),
GMADR is a standard PCI BAR.

The PCI core reads GMADR at enumeration-time.  Use pci_bus_address()
instead of reading it again in the driver.  This works correctly for both
32-bit and 64-bit BARs.  The spec above only mentions 32-bit GMADR, but
Yinghai's patch (link below) indicates some devices have a 64-bit GMADR.

[bhelgaas: reworked starting from http://lkml.kernel.org/r/1385851238-21085-13-git-send-email-yinghai@kernel.org]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07 11:36:55 -07:00
Bjorn Helgaas 5acc4ce44c agp/intel: Rename gtt_bus_addr to gtt_phys_addr
The only use of gtt_bus_addr is as an argument to ioremap(), so it is a CPU
physical address, not a bus address.  Rename it to gtt_phys_addr to reflect
this.

No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07 11:36:50 -07:00
Bjorn Helgaas d68c5a2717 agp: Use pci_resource_start() to get CPU physical address for BAR
amd_irongate_configure(), ati_configure(), and nvidia_configure() call
ioremap() on an address read directly from a BAR.  But a BAR contains a
bus address, and ioremap() expects a CPU physical address.  Use
pci_resource_start() to obtain the physical address.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-07 11:36:35 -07:00
Bin Shi 1582043970 apm-emulation: add hibernation APM events to support suspend2disk
Some embedded systems use hibernation for fast boot. and in it,
some software components need to handle specific things before
hibernation and after restore. So it needs to capture the apm
status about these pm events.

Currently apm just supports suspend to ram, but not suspend to disk,
so here add logic about hibernation apm events.

Signed-off-by: Bin Shi <Bin.Shi@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-07 13:50:28 +01:00
Bjorn Helgaas e501b3d87f agp: Support 64-bit APBASE
Per the AGP 3.0 spec, APBASE is a standard PCI BAR and may be either 32
bits or 64 bits wide.  Many drivers read APBASE directly, but they only
handled 32-bit BARs.

The PCI core reads APBASE at enumeration-time.  Use pci_bus_address()
instead of reading it again in the driver.  This works correctly for both
32-bit and 64-bit BARs.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-06 17:49:22 -07:00
Fengguang Wu 5f64822d63 tpm/tpm-sysfs: active_show() can be static
so we make it static

CC: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
CC: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:25 +01:00
Jason Gunthorpe 19b94d2df5 tpm: tpm_tis: Fix compile problems with CONFIG_PM_SLEEP/CONFIG_PNP
If CONFIG_PM_SLEEP=n, CONFIG_PNP=y we get this warning:

drivers/char/tpm/tpm_tis.c:706:13: warning: 'tpm_tis_reenable_interrupts' defined but not used [-Wunused-function]

This seems to have been introduced in a2fa3fb0d 'tpm: convert tpm_tis driver
to use dev_pm_ops from legacy pm_ops'

Also, unpon reviewing, the #ifdefs around tpm_tis_pm are not right, the first
reference is protected, the second is not. tpm_tis_pm is always defined so we
can drop the #ifdef.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:25 +01:00
Jason Gunthorpe e3302e0d6d tpm: Make tpm-dev allocate a per-file structure
This consolidates everything that is only used within tpm-dev.c
into tpm-dev.c and out of the publicly visible struct tpm_chip.

The per-file allocation lays the ground work for someday fixing the
strange forced O_EXCL behaviour of the current code.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:25 +01:00
Jason Gunthorpe 5f82e9f004 tpm: Use the ops structure instead of a copy in tpm_vendor_specific
This builds on the last commit to use the ops structure in the core
and reduce the size of tpm_vendor_specific.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:25 +01:00
Jason Gunthorpe 01ad1fa75d tpm: Create a tpm_class_ops structure and use it in the drivers
This replaces the static initialization of a tpm_vendor_specific
structure in the drivers with the standard Linux idiom of providing
a const structure of function pointers.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com>
[phuewe: did apply manually due to commit
191ffc6bde3 tpm/tpm_i2c_atmel: fix coccinelle warnings]
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:25 +01:00
Jason Gunthorpe 1e3b73a957 tpm: Pull all driver sysfs code into tpm-sysfs.c
The tpm core now sets up and controls all sysfs attributes, instead
of having each driver have a unique take on it.

All drivers now now have a uniform set of attributes, and no sysfs
related entry points are exported from the tpm core module.

This also uses the new method used to declare sysfs attributes
with DEVICE_ATTR_RO and 'struct attribute *'

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[phuewe: had to apply the tpm_i2c_atmel part manually due to commit
191ffc6bde3fc tpm/tpm_i2c_atmel: fix coccinelle warnings]

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:25 +01:00
Jason Gunthorpe 000a07b0aa tpm: Move sysfs functions from tpm-interface to tpm-sysfs
CLASS-sysfs.c is a common idiom for linux subsystems.

This is the first step to pulling all the sysfs support code from
the drivers into tpm-sysfs. This is a plain text copy from tpm-interface
with support changes to make it compile.

_tpm_pcr_read is made non-static and is called tpm_pcr_read_dev.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:24 +01:00
Jason Gunthorpe afdba32e2a tpm: Pull everything related to /dev/tpmX into tpm-dev.c
CLASS-dev.c is a common idiom for Linux subsystems

This pulls all the code related to the miscdev into tpm-dev.c and makes it
static. The identical file_operation structs in the drivers are purged and the
tpm common code unconditionally creates the miscdev.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Ashley Lai <adlai@linux.vnet.ibm.com>
[phuewe:
tpm_dev_release is now used only in this file, thus the EXPORT_SYMBOL
can be dropped and the function be marked as static.
It has no other in-kernel users]
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:24 +01:00
Michal Nazarewicz d65e55d499 char: tpm: nuvoton: remove unused variable
“wait” wait queue is defined but never used in the function, thus
it can be removed.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:24 +01:00
Fengguang Wu ba6a09d7c0 tpm/tpm_i2c_atmel: fix coccinelle warnings
drivers/char/tpm/tpm_i2c_atmel.c:178:8-9: WARNING: return of 0/1 in function 'i2c_atmel_req_canceled' with return type bool

 Return statements in functions returning bool should use
 true/false instead of 1/0.
Generated by: coccinelle/misc/boolreturn.cocci

CC: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
CC: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:24 +01:00
Peter Huewe 37bd99d7cb tpm/tpm_ibmvtpm: fix unreachable code warning (smatch warning)
smatch complains:
drivers/char/tpm/tpm_ibmvtpm.c:510
ibmvtpm_crq_process() info: ignoring unreachable code.

-> The return is not necessary here, remove it

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:24 +01:00
Peter Huewe 85c5e0d451 tpm/tpm_i2c_stm_st33: Check return code of get_burstcount
The 'get_burstcount' function can in some circumstances 'return -EBUSY' which
in tpm_stm_i2c_send is stored in an 'u32 burstcnt'
thus converting the signed value into an unsigned value, resulting
in 'burstcnt' being huge.
Changing the type to u32 only does not solve the problem as the signed
value is converted to an unsigned in I2C_WRITE_DATA, resulting in the
same effect.

Thus
-> Change type of burstcnt to u32 (the return type of get_burstcount)
-> Add a check for the return value of 'get_burstcount' and propagate a
potential error.

This makes also sense in the 'I2C_READ_DATA' case, where the there is no
signed/unsigned conversion.

found by coverity
Cc: stable@vger.kernel.org
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:24 +01:00
Peter Huewe 238b1eaa59 tpm/tpm_ppi: Check return value of acpi_get_name
If
 status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
fails for whatever reason and does not return AE_OK
 if (strstr(buffer.pointer, context) != NULL) {
does dereference a null pointer.

-> Check the return value and return the status to the caller

Found by coverity
Cc: stable@vger.kernel.org
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:23 +01:00
Peter Huewe 747d35bd9b tpm/tpm_ppi: Do not compare strcmp(a,b) == -1
Depending on the implementation strcmp might return the difference between
two strings not only -1,0,1 consequently
 if (strcmp (a,b) == -1)
might lead to taking the wrong branch

-> compare with < 0  instead,
which in any case is more canonical.

Cc: stable@vger.kernel.org
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
2014-01-06 14:37:23 +01:00
Jiang Liu 1569a4c4ce ACPI / TPM: detect PPI features by checking availability of _DSM functions
Detecting physical presence interface features by checking availbility
of corresponding ACPI _DSM functions, it should be more accurate than
checking TPM version number.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-05 16:07:15 +01:00
Jiang Liu 84b1667dea ACPI / TPM: replace open-coded _DSM code with helper functions
Use helper functions to simplify _DSM related code in TPM driver.

This patch also help to get rid of following warning messages:
[  163.509575] ACPI Error: Incorrect return type [Buffer] requested [Package]
(20130517/nsxfeval-135)

But there is still an warning left.
[  181.637366] ACPI Warning: \_SB_.IIO0.LPC0.TPM_._DSM: Argument #4 type
mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-05 16:07:14 +01:00