Commit Graph

74 Commits

Author SHA1 Message Date
Linus Torvalds 1b17366d69 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
 "So here's my next branch for powerpc.  A bit late as I was on vacation
  last week.  It's mostly the same stuff that was in next already, I
  just added two patches today which are the wiring up of lockref for
  powerpc, which for some reason fell through the cracks last time and
  is trivial.

  The highlights are, in addition to a bunch of bug fixes:

   - Reworked Machine Check handling on kernels running without a
     hypervisor (or acting as a hypervisor).  Provides hooks to handle
     some errors in real mode such as TLB errors, handle SLB errors,
     etc...

   - Support for retrieving memory error information from the service
     processor on IBM servers running without a hypervisor and routing
     them to the memory poison infrastructure.

   - _PAGE_NUMA support on server processors

   - 32-bit BookE relocatable kernel support

   - FSL e6500 hardware tablewalk support

   - A bunch of new/revived board support

   - FSL e6500 deeper idle states and altivec powerdown support

  You'll notice a generic mm change here, it has been acked by the
  relevant authorities and is a pre-req for our _PAGE_NUMA support"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits)
  powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked()
  powerpc: Add support for the optimised lockref implementation
  powerpc/powernv: Call OPAL sync before kexec'ing
  powerpc/eeh: Escalate error on non-existing PE
  powerpc/eeh: Handle multiple EEH errors
  powerpc: Fix transactional FP/VMX/VSX unavailable handlers
  powerpc: Don't corrupt transactional state when using FP/VMX in kernel
  powerpc: Reclaim two unused thread_info flag bits
  powerpc: Fix races with irq_work
  Move precessing of MCE queued event out from syscall exit path.
  pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines
  powerpc: Make add_system_ram_resources() __init
  powerpc: add SATA_MV to ppc64_defconfig
  powerpc/powernv: Increase candidate fw image size
  powerpc: Add debug checks to catch invalid cpu-to-node mappings
  powerpc: Fix the setup of CPU-to-Node mappings during CPU online
  powerpc/iommu: Don't detach device without IOMMU group
  powerpc/eeh: Hotplug improvement
  powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space
  powerpc/eeh: Add restore_config operation
  ...
2014-01-27 21:11:26 -08:00
Linus Torvalds 2d08cd0ef8 - Convert to misc driver to support module auto loading
- Remove unnecessary and dangerous use of device_lock
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS4T1aAAoJECObm247sIsiLMkQAKn11qSLk880dJO+cfW2VpqL
 vm3WreShOxNsKTEQfcbrnJtS+kYGkiyo8+Vve377QDIg+xeXpNZa0PbAEfh4HyuJ
 NH+vn0FYDf3rzF4Z9snm2HOHWCAsqLCE0guyMwwhUYH+fks4+YTJWCm4YWZOXbIS
 aI++G+5LBxGzMRbotoovqUhQy474fpQN/GFIlIZHP2bGtdeXiRuH0qH3BxVKafOF
 50RtAgJsLm1Nb+S20Umsz+llL3sop1wcPLKOlgCXqd+545CJAoq/qqEPjUtOrr+S
 qXvXhb0XM7zo73H2WzkVmS09HZWX4sMoHBYp8D6ToOIFF01LOVsXBKduPCPpTD7E
 zohhjgag9/RQ99l2B153IIIv0Bsg7b4YXBQ6qkWFoJolPL94LTq1PXk0f9mNhyPo
 mSqatcAeI5qtjqu9ncSd4YYTdBgp7SJcgwji8fI44tvzzpz8iheVUrpwcU1UumAK
 TpXLBoTLXllK1op3u9xgFrF4ISBMl7lZeZp3c1/1YRga7Ch6SdlB0tcLPfuSBRF0
 1Qb5jQrWz4qt/oZSkapcFALXQDgwoK8am9I0a5YXdhy9gSYm+o/TLwG5pTEnF4In
 xxuibmmJAmNcTJ9q6rUKjLLU/TqRKin+vyqW6is41IredgvNX8XDS3YokA5Fgv01
 mu1s7odFi08xjPRuYvmq
 =t9+R
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v3.14-rc1' of git://github.com/awilliam/linux-vfio

Pull vfio update from Alex Williamson:
 - convert to misc driver to support module auto loading
 - remove unnecessary and dangerous use of device_lock

* tag 'vfio-v3.14-rc1' of git://github.com/awilliam/linux-vfio:
  vfio-pci: Don't use device_lock around AER interrupt setup
  vfio: Convert control interface to misc driver
  misc: Reserve minor for VFIO
2014-01-24 17:42:31 -08:00
Alex Williamson 890ed578df vfio-pci: Use pci "try" reset interface
PCI resets will attempt to take the device_lock for any device to be
reset.  This is a problem if that lock is already held, for instance
in the device remove path.  It's not sufficient to simply kill the
user process or skip the reset if called after .remove as a race could
result in the same deadlock.  Instead, we handle all resets as "best
effort" using the PCI "try" reset interfaces.  This prevents the user
from being able to induce a deadlock by triggering a reset.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-15 10:43:17 -07:00
Alex Williamson 3be3a074cf vfio-pci: Don't use device_lock around AER interrupt setup
device_lock is much too prone to lockups.  For instance if we have a
pending .remove then device_lock is already held.  If userspace
attempts to modify AER signaling after that point, a deadlock occurs.
eventfd setup/teardown is already protected in vfio with the igate
mutex.  AER is not a high performance interrupt, so we can also use
the same mutex to protect signaling versus setup races.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-01-14 16:12:55 -07:00
Alistair Popple e589a4404f powerpc/iommu: Update constant names to reflect their hardcoded page size
The powerpc iommu uses a hardcoded page size of 4K. This patch changes
the name of the IOMMU_PAGE_* macros to reflect the hardcoded values. A
future patch will use the existing names to support dynamic page
sizes.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30 14:17:06 +11:00
Alex Williamson d10999016f vfio: Convert control interface to misc driver
This change allows us to support module auto loading using devname
support in userspace tools.  With this, /dev/vfio/vfio will always
be present and opening it will cause the vfio module to load.  This
should avoid needing to configure the system to statically load
vfio in order to get libvirt to correctly detect support for it.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-12-19 10:17:13 -07:00
Alex Williamson 274127a1fd PCI: Rename PCI_VC_PORT_REG1/2 to PCI_VC_PORT_CAP1/2
These are set of two capability registers, it's pretty much given that
they're registers, so reflect their purpose in the name.

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-12-17 17:49:39 -07:00
Antonios Motakis d93b3ac0ed VFIO: vfio_iommu_type1: fix bug caused by break in nested loop
In vfio_iommu_type1.c there is a bug in vfio_dma_do_map, when checking
that pages are not already mapped. Since the check is being done in a
for loop nested within the main loop, breaking out of it does not create
the intended behavior. If the underlying IOMMU driver returns a non-NULL
value, this will be ignored and mapping the DMA range will be attempted
anyway, leading to unpredictable behavior.

This interracts badly with the ARM SMMU driver issue fixed in the patch
that was submitted with the title:
"[PATCH 2/2] ARM: SMMU: return NULL on error in arm_smmu_iova_to_phys"
Both fixes are required in order to use the vfio_iommu_type1 driver
with an ARM SMMU.

This patch refactors the function slightly, in order to also make this
kind of bug less likely.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-10-11 10:40:46 -06:00
Alex Williamson 8b27ee60bf vfio-pci: PCI hot reset interface
The current VFIO_DEVICE_RESET interface only maps to PCI use cases
where we can isolate the reset to the individual PCI function.  This
means the device must support FLR (PCIe or AF), PM reset on D3hot->D0
transition, device specific reset, or be a singleton device on a bus
for a secondary bus reset.  FLR does not have widespread support,
PM reset is not very reliable, and bus topology is dictated by the
system and device design.  We need to provide a means for a user to
induce a bus reset in cases where the existing mechanisms are not
available or not reliable.

This device specific extension to VFIO provides the user with this
ability.  Two new ioctls are introduced:
 - VFIO_DEVICE_PCI_GET_HOT_RESET_INFO
 - VFIO_DEVICE_PCI_HOT_RESET

The first provides the user with information about the extent of
devices affected by a hot reset.  This is essentially a list of
devices and the IOMMU groups they belong to.  The user may then
initiate a hot reset by calling the second ioctl.  We must be
careful that the user has ownership of all the affected devices
found via the first ioctl, so the second ioctl takes a list of file
descriptors for the VFIO groups affected by the reset.  Each group
must have IOMMU protection established for the ioctl to succeed.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-09-04 11:28:04 -06:00
Alex Williamson 17638db1b8 vfio-pci: Test for extended config space
Having PCIe/PCI-X capability isn't enough to assume that there are
extended capabilities.  Both specs define that the first capability
header is all zero if there are no extended capabilities.  Testing
for this avoids an erroneous message about hiding capability 0x0 at
offset 0x100.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-09-04 10:58:52 -06:00
Alex Williamson 20e7745784 vfio-pci: Use fdget() rather than eventfd_fget()
eventfd_fget() tests to see whether the file is an eventfd file, which
we then immediately pass to eventfd_ctx_fileget(), which again tests
whether the file is an eventfd file.  Simplify slightly by using
fdget() so that we only test that we're looking at an eventfd once.
fget() could also be used, but fdget() makes use of fget_light() for
another slight optimization.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-08-28 09:49:55 -06:00
Alex Williamson 5d042fbdbb vfio: Add O_CLOEXEC flag to vfio device fd
Add the default O_CLOEXEC flag for device file descriptors.  This is
generally considered a safer option as it allows the user a race free
option to decide whether file descriptors are inherited across exec,
with the default avoiding file descriptor leaks.

Reported-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-08-22 10:33:41 -06:00
Yann Droneaud a5d550703d vfio: use get_unused_fd_flags(0) instead of get_unused_fd()
Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().

Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.

In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.

This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.

The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-08-22 10:20:05 -06:00
Alexey Kardashevskiy 6cdd978213 vfio: add external user support
VFIO is designed to be used via ioctls on file descriptors
returned by VFIO.

However in some situations support for an external user is required.
The first user is KVM on PPC64 (SPAPR TCE protocol) which is going to
use the existing VFIO groups for exclusive access in real/virtual mode
on a host to avoid passing map/unmap requests to the user space which
would made things pretty slow.

The protocol includes:

1. do normal VFIO init operation:
	- opening a new container;
	- attaching group(s) to it;
	- setting an IOMMU driver for a container.
When IOMMU is set for a container, all groups in it are
considered ready to use by an external user.

2. User space passes a group fd to an external user.
The external user calls vfio_group_get_external_user()
to verify that:
	- the group is initialized;
	- IOMMU is set for it.
If both checks passed, vfio_group_get_external_user()
increments the container user counter to prevent
the VFIO group from disposal before KVM exits.

3. The external user calls vfio_external_user_iommu_id()
to know an IOMMU ID. PPC64 KVM uses it to link logical bus
number (LIOBN) with IOMMU ID.

4. When the external KVM finishes, it calls
vfio_group_put_external_user() to release the VFIO group.
This call decrements the container user counter.
Everything gets released.

The "vfio: Limit group opens" patch is also required for the consistency.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-08-05 10:52:36 -06:00
Alex Williamson d24cdbfd28 vfio-pci: Avoid deadlock on remove
If an attempt is made to unbind a device from vfio-pci while that
device is in use, the request is blocked until the device becomes
unused.  Unfortunately, that unbind path still grabs the device_lock,
which certain things like __pci_reset_function() also want to take.
This means we need to try to acquire the locks ourselves and use the
pre-locked version, __pci_reset_function_locked().

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-24 16:36:41 -06:00
Alex Williamson c64019302b vfio: Ignore sprurious notifies
Remove debugging WARN_ON if we get a spurious notify for a group that
no longer exists.  No reports of anyone hitting this, but it would
likely be a race and not a bug if they did.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-24 16:36:40 -06:00
Alex Williamson de9c7602ca vfio: Don't overreact to DEL_DEVICE
BUS_NOTIFY_DEL_DEVICE triggers IOMMU drivers to remove devices from
their iommu group, but there's really nothing we can do about it at
this point.  If the device is in use, then the vfio sub-driver will
block the device_del from completing until it's released.  If the
device is not in use or not owned by a vfio sub-driver, then we
really don't care that it's being removed.

The current code can be triggered just by unloading an sr-iov driver
(ex. igb) while the VFs are attached to vfio-pci because it makes an
incorrect assumption about the ordering of driver remove callbacks
vs the DEL_DEVICE notification.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-24 16:36:00 -06:00
Linus Torvalds 15a49b9a90 vfio Updates for v3.11
Largely hugepage support for vfio/type1 iommu and surrounding cleanups and fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJR2uNvAAoJECObm247sIsiJRYQAJK15MfXgJq2PtBABNvFUAOG
 nqUvLgBgM5Ow1NI0Rzh9jkNohNqCvXDFGaWXXnsaX83hIpi59GFK31W2E3SiFCj3
 xISA9SUnm7Kjt9LAF6HTNz805zBkshIOk4MCx6HlezVWSRlWwT3rZzI4dI2fMvl8
 iPRk1Ion3QSQui99HWfXv/rtezAIzgZqsFqPC6DjWRfN7LcdEtKtcQwnrSb5GGY9
 3TIRY9IRYTSfJ2yjSz5f5258JxoDG5sR8dTMkgG2Gm92iGvGcPGpzQWPzVc4t+TO
 PdTqtv9ftEyAJKsYTFjPIod8XbzJBa1FSPadVAIfwF0JCDcsSFjoWGp+RzMQQSF8
 MK3VsnQ/pqJfs2nJHDQbWbKu0qWYPntvOCdojZ4679ceDTd0t515npfYeDQuX8yU
 fAA5rB46mDXjyxikTP574NdnkcGjbAj7EOCp7s+WTsVPGQQ3mId/3fQw0Wg7bE6v
 jaJqdRj70SNTRHs8DFLQhvSZgpef4RzepE4sRBZqzY4vWd4riNcAC3Got+F2rQy3
 X4hcHHU/5LGLoGMxOJQmuBfKVM8RAgikq6w2RfttVMLeKCknKtJ29OnotKilvILh
 W8nAOGxRnkmONFfHakNJtLl5tQJ4FQXc2cG8OeIIhHgheJjUxL72/zv8bBxOo7rY
 jUBjtZ5riQXc/ck4FEGI
 =9+Jh
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v3.11' of git://github.com/awilliam/linux-vfio

Pull vfio updates from Alex Williamson:
 "Largely hugepage support for vfio/type1 iommu and surrounding cleanups
  and fixes"

* tag 'vfio-v3.11' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Fix leak on error path
  vfio: Limit group opens
  vfio/type1: Fix missed frees and zero sized removes
  vfio: fix documentation
  vfio: Provide module option to disable vfio_iommu_type1 hugepage support
  vfio: hugepage support for vfio_iommu_type1
  vfio: Convert type1 iommu to use rbtree
2013-07-10 14:50:08 -07:00
Linus Torvalds 65b97fb730 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
 "This is the powerpc changes for the 3.11 merge window.  In addition to
  the usual bug fixes and small updates, the main highlights are:

   - Support for transparent huge pages by Aneesh Kumar for 64-bit
     server processors.  This allows the use of 16M pages as transparent
     huge pages on kernels compiled with a 64K base page size.

   - Base VFIO support for KVM on power by Alexey Kardashevskiy

   - Wiring up of our nvram to the pstore infrastructure, including
     putting compressed oopses in there by Aruna Balakrishnaiah

   - Move, rework and improve our "EEH" (basically PCI error handling
     and recovery) infrastructure.  It is no longer specific to pseries
     but is now usable by the new "powernv" platform as well (no
     hypervisor) by Gavin Shan.

   - I fixed some bugs in our math-emu instruction decoding and made it
     usable to emulate some optional FP instructions on processors with
     hard FP that lack them (such as fsqrt on Freescale embedded
     processors).

   - Support for Power8 "Event Based Branch" facility by Michael
     Ellerman.  This facility allows what is basically "userspace
     interrupts" for performance monitor events.

   - A bunch of Transactional Memory vs.  Signals bug fixes and HW
     breakpoint/watchpoint fixes by Michael Neuling.

  And more ...  I appologize in advance if I've failed to highlight
  something that somebody deemed worth it."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits)
  pstore: Add hsize argument in write_buf call of pstore_ftrace_call
  powerpc/fsl: add MPIC timer wakeup support
  powerpc/mpic: create mpic subsystem object
  powerpc/mpic: add global timer support
  powerpc/mpic: add irq_set_wake support
  powerpc/85xx: enable coreint for all the 64bit boards
  powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx
  powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig
  powerpc/mpic: Add get_version API both for internal and external use
  powerpc: Handle both new style and old style reserve maps
  powerpc/hw_brk: Fix off by one error when validating DAWR region end
  powerpc/pseries: Support compression of oops text via pstore
  powerpc/pseries: Re-organise the oops compression code
  pstore: Pass header size in the pstore write callback
  powerpc/powernv: Fix iommu initialization again
  powerpc/pseries: Inform the hypervisor we are using EBB regs
  powerpc/perf: Add power8 EBB support
  powerpc/perf: Core EBB support for 64-bit book3s
  powerpc/perf: Drop MMCRA from thread_struct
  powerpc/perf: Don't enable if we have zero events
  ...
2013-07-04 10:29:23 -07:00
Alex Williamson 8d38ef1948 vfio/type1: Fix leak on error path
We also don't handle unpinning zero pages as an error on other exits
so we can fix that inconsistency by rolling in the next conditional
return.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-01 08:28:58 -06:00
Al Viro a47df1518e vfio: remap_pfn_range() sets all those flags...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:46:41 +04:00
Alex Williamson 6d6768c61b vfio: Limit group opens
vfio_group_fops_open attempts to limit concurrent sessions by
disallowing opens once group->container is set.  This really doesn't
do what we want and allow for inconsistent behavior, for instance a
group can be opened twice, then a container set giving the user two
file descriptors to the group.  But then it won't allow more to be
opened.  There's not much reason to have the group opened multiple
times since most access is through devices or the container, so
complete what the original code intended and only allow a single
instance.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-25 16:06:54 -06:00
Alex Williamson f5bfdbf252 vfio/type1: Fix missed frees and zero sized removes
With hugepage support we can only properly aligned and sized ranges.
We only guarantee that we can unmap the same ranges mapped and not
arbitrary sub-ranges.  This means we might not free anything or might
free more than requested.  The vfio unmap interface started storing
the unmapped size to return to userspace to handle this.  This patch
fixes a few places where we don't properly handle those cases, moves
a memory allocation to a place where failure is an option and checks
our loops to make sure we don't get into an infinite loop trying to
remove an overlap.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-25 16:01:44 -06:00
Alex Williamson 5c6c2b21ec vfio: Provide module option to disable vfio_iommu_type1 hugepage support
Add a module option to vfio_iommu_type1 to disable IOMMU hugepage
support.  This causes iommu_map to only be called with single page
mappings, disabling the IOMMU driver's ability to use hugepages.
This option can be enabled by loading vfio_iommu_type1 with
disable_hugepages=1 or dynamically through sysfs.  If enabled
dynamically, only new mappings are restricted.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:11 -06:00
Alex Williamson 166fd7d94a vfio: hugepage support for vfio_iommu_type1
We currently send all mappings to the iommu in PAGE_SIZE chunks,
which prevents the iommu from enabling support for larger page sizes.
We still need to pin pages, which means we step through them in
PAGE_SIZE chunks, but we can batch up contiguous physical memory
chunks to allow the iommu the opportunity to use larger pages.  The
approach here is a bit different that the one currently used for
legacy KVM device assignment.  Rather than looking at the vma page
size and using that as the maximum size to pass to the iommu, we
instead simply look at whether the next page is physically
contiguous.  This means we might ask the iommu to map a 4MB region,
while legacy KVM might limit itself to a maximum of 2MB.

Splitting our mapping path also allows us to be smarter about locked
memory because we can more easily unwind if the user attempts to
exceed the limit.  Therefore, rather than assuming that a mapping
will result in locked memory, we test each page as it is pinned to
determine whether it locks RAM vs an mmap'd MMIO region.  This should
result in better locking granularity and less locked page fudge
factors in userspace.

The unmap path uses the same algorithm as legacy KVM.  We don't want
to track the pfn for each mapping ourselves, but we need the pfn in
order to unpin pages.  We therefore ask the iommu for the iova to
physical address translation, ask it to unpin a page, and see how many
pages were actually unpinned.  iommus supporting large pages will
often return something bigger than a page here, which we know will be
physically contiguous and we can unpin a batch of pfns.  iommus not
supporting large mappings won't see an improvement in batching here as
they only unmap a page at a time.

With this change, we also make a clarification to the API for mapping
and unmapping DMA.  We can only guarantee unmaps at the same
granularity as used for the original mapping.  In other words,
unmapping a subregion of a previous mapping is not guaranteed and may
result in a larger or smaller unmapping than requested.  The size
field in the unmapping structure is updated to reflect this.
Previously this was unmodified on mapping, always returning the the
requested unmap size.  This is now updated to return the actual unmap
size on success, allowing userspace to appropriately track mappings.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:38:02 -06:00
Alex Williamson cd9b22685e vfio: Convert type1 iommu to use rbtree
We need to keep track of all the DMA mappings of an iommu container so
that it can be automatically unmapped when the user releases the file
descriptor.  We currently do this using a simple list, where we merge
entries with contiguous iovas and virtual addresses.  Using a tree for
this is a bit more efficient and allows us to use common code instead
of inventing our own.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21 09:37:50 -06:00
Alexey Kardashevskiy 5b25199eff powerpc/vfio: Enable on pSeries platform
The enables VFIO on the pSeries platform, enabling user space
programs to access PCI devices directly.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 16:55:15 +10:00
Alexey Kardashevskiy 5ffd229c02 powerpc/vfio: Implement IOMMU driver for VFIO
VFIO implements platform independent stuff such as
a PCI driver, BAR access (via read/write on a file descriptor
or direct mapping when possible) and IRQ signaling.

The platform dependent part includes IOMMU initialization
and handling.  This implements an IOMMU driver for VFIO
which does mapping/unmapping pages for the guest IO and
provides information about DMA window (required by a POWER
guest).

Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20 16:55:14 +10:00
Alexey Kardashevskiy 9a6aa279d3 vfio: fix crash on rmmod
devtmpfs_delete_node() calls devnode() callback with mode==NULL but
vfio still tries to write there.

The patch fixes this.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-05 08:54:16 -06:00
Linus Torvalds 0b2e3b6bb4 vfio updates for v3.10
Changes include extension to support PCI AER notification to userspace, byte granularity of PCI config space and access to unarchitected PCI config space, better protection around IOMMU driver accesses, default file mode fix, and a few misc cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgox9AAoJECObm247sIsizJwP/23KprR6BuRt168Obo+xC/lp
 kj1E4Hd4XHx6T/5XRexa4GqhmyLqgoqbS19uj/K6ebY9rouVKo0V6OYNFDQiFR/F
 yEGjYIBKV9/eBZMQI4RbZpZKGDXTeFrXyjsac1m51JrR3st8zsvZlNPE/TjzhSfz
 jMnsCC99ZwIFjmptw/yWwgInswy1n9H9iICS14Xn1x7v71iyOE32reTG6M9HsPHe
 Xm5F0K5iLQX8qoISHAomrTnFmCLxp5Y2qhh7nZWmC2gCbPBEnGdqx4prwzJayAaC
 DAN8osaYldoKQuwI4wFYMICHxxCEFk8xU58FeKCmeQJZgomefVAoRKf86gAEsSLR
 XHptBQOktWVKNFhzZWyOuAX3iua/hmWcOa05I6inycV1x2ZAGlNhvJnj1iKIphLk
 +neBFAD9wDcAJZdXkfudq0jJ9jJTSAWBv8d+hozNfkjTVhF+wRnhZ7V6dZfb9+W6
 kPGbgwqKApLoOabQbxbZ5Ftr6S7344prB/HAMywGa+xZfoxoYPxBHCi0rSTvUTWy
 oWLtzrKRbjBDc0qF4eEK9RZlmVt2ZmCUnUB3kbWED4mrJAHu4LlFghnAloePrIZ3
 kXlMARWbyw/E+1WIMO4Ito5+1s3zVsJJgzVsAQDJkTQw2aYDhns73/Y25Dj7x7QS
 BKebrXnh2xVCN6OIu+eX
 =F0Cc
 -----END PGP SIGNATURE-----

Merge tag 'vfio-for-v3.10' of git://github.com/awilliam/linux-vfio

Pull vfio updates from Alex Williamson:
 "Changes include extension to support PCI AER notification to
  userspace, byte granularity of PCI config space and access to
  unarchitected PCI config space, better protection around IOMMU driver
  accesses, default file mode fix, and a few misc cleanups."

* tag 'vfio-for-v3.10' of git://github.com/awilliam/linux-vfio:
  vfio: Set container device mode
  vfio: Use down_reads to protect iommu disconnects
  vfio: Convert container->group_lock to rwsem
  PCI/VFIO: use pcie_flags_reg instead of access PCI-E Capabilities Register
  vfio-pci: Enable raw access to unassigned config space
  vfio-pci: Use byte granularity in config map
  vfio: make local function vfio_pci_intx_unmask_handler() static
  VFIO-AER: Vfio-pci driver changes for supporting AER
  VFIO: Wrapper for getting reference to vfio_device
2013-05-02 14:02:32 -07:00
Alex Williamson 664e9386bd vfio: Set container device mode
Minor 0 is the VFIO container device (/dev/vfio/vfio).  On it's own
the container does not provide a user with any privileged access.  It
only supports API version check and extension check ioctls.  Only by
attaching a VFIO group to the container does it gain any access.  Set
the mode of the container to allow access.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-30 15:42:28 -06:00
Linus Torvalds 96a3e8af5a PCI changes for the v3.10 merge window:
PCI device hotplug
     - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe)
     - Make acpiphp builtin only, not modular (Jiang Liu)
     - Add acpiphp mutual exclusion (Jiang Liu)
 
   Power management
     - Skip "PME enabled/disabled" messages when not supported (Rafael Wysocki)
     - Fix fallback to PCI_D0 (Rafael Wysocki)
 
   Miscellaneous
     - Factor quirk_io_region (Yinghai Lu)
     - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas)
     - Clean up EISA resource initialization and logging (Bjorn Helgaas)
     - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas)
     - MIPS: Initialize of_node before scanning bus (Gabor Juhos)
     - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor Juhos)
     - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang)
     - Fix aer_inject return values (Prarit Bhargava)
     - Remove PME/ACPI dependency (Andrew Murray)
     - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRfhSWAAoJEFmIoMA60/r8GrYQAIHDsyZIuJSf6g+8Td1h+PIC
 YD3wQhbyrDqQDuKU4+9cz+JsbHmnozUGA4UmlwmOGBxEa/Uauspb6yX1P1+x9Ok1
 WD7Ar3BlA5OuYI/1L1mgCiA428MTujwoR4fPnC0+KFy8xk1tBpmhzzeOFohbKyFF
 hMBO/Xt9tCzPATJ1LhjIH4xAykfDkbnPNHNcUKRoAkRo0CO0lS8gcTk0shXXSNng
 p9kQ6c4cYZvlRIJTwlawWV09nr7mDsBYa3JClqXYZufUWfEwvIuhisJxCJ57sWi9
 t+Ev8dm7VM6Cr5dV+ORArlboBFrq4f/W5U9j9GPFrRplwf+WbNT6tNGSpSDq8XhU
 Q7JjNgPWVdWXe1vIsMwaO49zi45/bNehuCSFLZiyPZwedMk764tys+iYw+tMRtv1
 tBR7lwESSXfagmvWyQAuQOTy6Rj26BPd2T8e2lMsvsuQO9mCyTK6Ey3YyKuqKQK/
 l5Gns4vv4eaCjGXqqDGiydUjSes+r/v1bu43XiRnwPQJUKb5kr5SjN5/zSMBuUgm
 TLT/bnv8qvdFxCpVQJFv4k/uzULARMdbvLtTy8osB14vNHX9jPn+xORjLaZNiO6O
 7fFispMU8Om56hNkD6C451r3icRjjGlD7OA8KOlbZ8f876sLzGV9i6P9gwCoRdEB
 wclDPsN7kAzw/V2sEE60
 =bj8i
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.10 merge window:

  PCI device hotplug
   - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe)
   - Make acpiphp builtin only, not modular (Jiang Liu)
   - Add acpiphp mutual exclusion (Jiang Liu)

  Power management
   - Skip "PME enabled/disabled" messages when not supported (Rafael
     Wysocki)
   - Fix fallback to PCI_D0 (Rafael Wysocki)

  Miscellaneous
   - Factor quirk_io_region (Yinghai Lu)
   - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas)
   - Clean up EISA resource initialization and logging (Bjorn Helgaas)
   - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas)
   - MIPS: Initialize of_node before scanning bus (Gabor Juhos)
   - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor
     Juhos)
   - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang)
   - Fix aer_inject return values (Prarit Bhargava)
   - Remove PME/ACPI dependency (Andrew Murray)
   - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)"

* tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  vfio-pci: Use cached MSI/MSI-X capabilities
  vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Remove "extern" from function declarations
  PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h
  PCI: Use msix_table_size() directly, drop multi_msix_capable()
  PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros
  PCI: Drop is_64bit_address() and is_mask_bit_support() macros
  PCI: Drop msi_data_reg() macro
  PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros
  PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly
  PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc
  PCI: Clean up MSI/MSI-X capability #defines
  PCI: Use cached MSI-X cap while enabling MSI-X
  PCI: Use cached MSI cap while enabling MSI interrupts
  PCI: Remove MSI/MSI-X cap check in pci_msi_check_device()
  PCI: Cache MSI/MSI-X capability offsets in struct pci_dev
  PCI: Use u8, not int, for PM capability offset
  [SCSI] megaraid_sas: Use correct #define for MSI-X capability
  PCI: Remove "extern" from function declarations
  ...
2013-04-29 09:30:25 -07:00
Alex Williamson 0b43c08233 vfio: Use down_reads to protect iommu disconnects
If a group or device is released or a container is unset from a group
it can race against file ops on the container.  Protect these with
down_reads to allow concurrent users.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-29 08:41:36 -06:00
Alex Williamson 9587f44aa6 vfio: Convert container->group_lock to rwsem
All current users are writers, maintaining current mutual exclusion.
This lets us add read users next.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-25 16:12:38 -06:00
Bjorn Helgaas a9047f24df vfio-pci: Use cached MSI/MSI-X capabilities
We now cache the MSI/MSI-X capability offsets in the struct pci_dev,
so no need to find the capabilities again.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-24 11:35:56 -06:00
Bjorn Helgaas 508d1aa602 vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the
Table Offset register, not the flags ("Message Control" per spec)
register.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-24 11:35:56 -06:00
Yijing Wang aa2cba51a0 PCI/VFIO: use pcie_flags_reg instead of access PCI-E Capabilities Register
Currently, we use pcie_flags_reg to cache PCI-E Capabilities Register,
because PCI-E Capabilities Register bits are almost read-only. This patch
use pcie_caps_reg() instead of another access PCI-E Capabilities Register.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-15 08:45:10 -06:00
Alex Williamson a7d1ea1c11 vfio-pci: Enable raw access to unassigned config space
Devices like be2net hide registers between the gaps in capabilities
and architected regions of PCI config space.  Our choices to support
such devices is to either build an ever growing and unmanageable white
list or rely on hardware isolation to protect us.  These registers are
really no different than MMIO or I/O port space registers, which we
don't attempt to regulate, so treat PCI config space in the same way.

Reported-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Gavin Shan <shangw@linux.vnet.ibm.com>
2013-04-01 09:04:12 -06:00
Alex Williamson 180b138107 vfio-pci: Use byte granularity in config map
The config map previously used a byte per dword to map regions of
config space to capabilities.  Modulo a bug where we round the length
of capabilities down instead of up, this theoretically works well and
saves space so long as devices don't try to hide registers in the gaps
between capabilities.  Unfortunately they do exactly that so we need
byte granularity on our config space map.  Increase the allocation of
the config map and split accesses at capability region boundaries.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Gavin Shan <shangw@linux.vnet.ibm.com>
2013-04-01 09:03:44 -06:00
Alex Williamson 904c680c7b vfio-pci: Fix possible integer overflow
The VFIO_DEVICE_SET_IRQS ioctl takes a start and count parameter, both
of which are unsigned.  We attempt to bounds check these, but fail to
account for the case where start is a very large number, allowing
start + count to wrap back into the valid range.  Bounds check both
start and start + count.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-03-26 11:33:16 -06:00
Wei Yongjun 0bced2f728 vfio: make local function vfio_pci_intx_unmask_handler() static
vfio_pci_intx_unmask_handler() was not declared. It should be static.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-03-25 11:15:44 -06:00
Arnd Bergmann 25e9789ddd vfio: include <linux/slab.h> for kmalloc
The vfio drivers call kmalloc or kzalloc, but do not
include <linux/slab.h>, which causes build errors on
ARM.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: kvm@vger.kernel.org
2013-03-15 12:58:20 -06:00
Vijay Mohan Pandarathil dad9f8972e VFIO-AER: Vfio-pci driver changes for supporting AER
- New VFIO_SET_IRQ ioctl option to pass the eventfd that is signaled when
  an error occurs in the vfio_pci_device

- Register pci_error_handler for the vfio_pci driver

- When the device encounters an error, the error handler registered by
  the vfio_pci driver gets invoked by the AER infrastructure

- In the error handler, signal the eventfd registered for the device.

- This results in the qemu eventfd handler getting invoked and
  appropriate action taken for the guest.

Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-03-11 09:31:22 -06:00
Vijay Mohan Pandarathil 44f507163d VFIO: Wrapper for getting reference to vfio_device
- Added vfio_device_get_from_dev() as wrapper to get
  reference to vfio_device from struct device.

- Added vfio_device_data() as a wrapper to get device_data from
  vfio_device.

Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-03-11 09:28:44 -06:00
Tejun Heo a1c36b166b vfio: convert to idr_alloc()
Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:19 -08:00
Kees Cook d65530fbc7 drivers/vfio: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-24 09:59:44 -07:00
Alex Williamson 84237a826b vfio-pci: Add support for VGA region access
PCI defines display class VGA regions at I/O port address 0x3b0, 0x3c0
and MMIO address 0xa0000.  As these are non-overlapping, we can ignore
the I/O port vs MMIO difference and expose them both in a single
region.  We make use of the VGA arbiter around each access to
configure chipset access as necessary.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-18 10:11:13 -07:00
Alex Williamson 2dd1194833 vfio-pci: Manage user power state transitions
We give the user access to change the power state of the device but
certain transitions result in an uninitialized state which the user
cannot resolve.  To fix this we need to mark the PowerState field of
the PMCSR register read-only and effect the requested change on behalf
of the user.  This has the added benefit that pdev->current_state
remains accurate while controlled by the user.

The primary example of this bug is a QEMU guest doing a reboot where
the device it put into D3 on shutdown and becomes unusable on the next
boot because the device did a soft reset on D3->D0 (NoSoftRst-).

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-18 10:10:33 -07:00
Alex Williamson 2b489a45f6 vfio: whitelist pcieport
pcieport does nice things like manage AER and we know it doesn't do
DMA or expose any user accessible devices on the host.  It also keeps
the Memory, I/O, and Busmaster bits enabled, which is pretty handy
when trying to use anyting below it.  Devices owned by pcieport cannot
be given to users via vfio, but we can tolerate them not being owned
by vfio-pci.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-14 14:02:13 -07:00
Alex Williamson e014e9444a vfio: Protect vfio_dev_present against device_del
vfio_dev_present is meant to give us a wait_event callback so that we
can block removing a device from vfio until it becomes unused.  The
root of this check depends on being able to get the iommu group from
the device.  Unfortunately if the BUS_NOTIFY_DEL_DEVICE notifier has
fired then the device-group reference is no longer searchable and we
fail the lookup.

We don't need to go to such extents for this though.  We have a
reference to the device, from which we can acquire a reference to the
group.  We can then use the group reference to search for the device
and properly block removal.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-14 14:02:13 -07:00