3b03cc0783
38 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Wang Nan
|
edd695b032 |
perf clang: Compile BPF script using builtin clang support
After this patch, perf utilizes builtin clang support to build BPF script, no longer depend on external clang, but fallbacking to it if for some reason the builtin compiling framework fails. Test: $ type clang -bash: type: clang: not found $ cat ~/.perfconfig $ echo '#define LINUX_VERSION_CODE 0x040700' > ./test.c $ cat ./tools/perf/tests/bpf-script-example.c >> ./test.c $ ./perf record -v --dry-run -e ./test.c 2>&1 | grep builtin bpf: successfull builtin compilation $ Can't pass cflags so unable to include kernel headers now. Will be fixed by following commits. Committer notes: Make sure '-v' comes before the '-e ./test.c' in the command line otherwise the 'verbose' variable will not be set when the bpf event is parsed and thus the pr_debug indicating a 'successfull builtin compilation' will not be output, as the debug level (1) will be less than what 'verbose' has at that point (0). Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-16-wangnan0@huawei.com [ Spell check/reflow successfull pr_debug string ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wang Nan
|
2bd42de0e1 |
perf llvm: Extract helpers in llvm-utils.c
The following commits will use builtin clang to compile BPF scripts. llvm__get_kbuild_opts() and llvm__get_nr_cpus() are extracted to help building '-DKERNEL_VERSION_CODE' and '-D__NR_CPUS__' macros. Doing object dumping in bpf loader, so further builtin clang compiling needn't consider it. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-7-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Alexander Alemayhu
|
042cfb5fa6 |
perf tools: Fix typo "No enough" to "Not enough"
The latter version occurs much more when running git grep. Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20161013161811.4939-1-alexander@alemayhu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Colin Ian King
|
c77ce225d5 |
perf bpf: Fix typo: "ehough" -> "enough"
Trivial typo fix in pr_debug message Signed-off-by: Colin King <colin.king@canonical.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: He Kuang <hekuang@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160821141924.8056-1-colin.king@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wang Nan
|
b4ee6d415e |
perf bpf: Support BPF program attach to tracepoints
To support
|
||
|
Wang Nan
|
cd102d70fe |
perf bpf: Rename bpf__foreach_tev() to bpf__foreach_event()
Following commit will allow BPF script attach to tracepoints. bpf__foreach_tev() will iterate over all events, not only kprobes. Rename it to bpf__foreach_event(). Since only group and event are used by caller, there's no need to pass full 'struct probe_trace_event' to bpf_prog_iter_callback_t. Pass only these two strings. After this patch bpf_prog_iter_callback_t natually support tracepoints. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468406646-21642-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
c8b5f2c96d |
tools: Introduce str_error_r()
The tools so far have been using the strerror_r() GNU variant, that returns a string, be it the buffer passed or something else. But that, besides being tricky in cases where we expect that the function using strerror_r() returns the error formatted in a provided buffer (we have to check if it returned something else and copy that instead), breaks the build on systems not using glibc, like Alpine Linux, where musl libc is used. So, introduce yet another wrapper, str_error_r(), that has the GNU interface, but uses the portable XSI variant of strerror_r(), so that users rest asured that the provided buffer is used and it is what is returned. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
edb13ed47c |
tools lib bpf: Rename set_private() to set_priv()
For consistency with class__priv() elsewhere, and with the callback typedef for clearing those areas (e.g. bpf_map_clear_priv_t). Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-rnbiyv27ohw8xppsgx0el3xb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
be834ffbd1 |
tools lib bpf: Make bpf_program__get_private() use IS_ERR()
For consistency with bpf_map__priv() and elsewhere. Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-x17nk5mrazkf45z0l0ahlmo8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
a7fe0450b0 |
tools lib bpf: Remove _get_ from non-refcount method names
The use of this term is not warranted here, we use it in the kernel sources and in tools/ for refcounting, so, for consistency, rename them. Acked-bu: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-4ya1ot2e2fkrz48ws9ebiofs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
6e009e65a1 |
tools lib bpf: Rename bpf_map__get_fd() to bpf_map__fd()
For consistency, leaving "get" for reference counting. Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-msy8sxfz9th6gl2xjeci2btm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
53897a78ca |
tools lib bpf: Use IS_ERR() reporting macros with bpf_map__get_def()
And for consistency, rename it to bpf_map__def(), leaving "get" for reference counting. Also make it return a const pointer, as suggested by Wang. Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-mer00xqkiho0ymg66b5i9luw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
009ad5d594 |
tools lib bpf: Rename bpf_map__get_name() to bpf_map__name()
For consistency, leaving "get" for reference counting. Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-crnflv84ejyhpba933ec71gs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
b4cbfa5670 |
tools lib bpf: Use IS_ERR() reporting macros with bpf_map__get_private()
To try to, over time, consistently use the IS_ERR() interface instead of using two return values, i.e. the integer return value for an error and the pointer address to return the bpf_map->priv pointer. Also rename it to bpf__priv(), to leave the "get" term for reference counting. Noticed while working on using BPF for collecting non-integer syscall argument payloads (struct sockaddr in calls such as connect(), for instance), where we need to use BPF maps and thus generalise bpf__setup_stdout() to connect bpf_output events with maps in a bpf proggie. Acked-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-saypxyd6ptrct379jqgxx4bl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wang Nan
|
72c0809856 |
perf bpf: Automatically create bpf-output event __bpf_stdout__
This patch removes the need to set a bpf-output event in cmdline. By
referencing a map named '__bpf_stdout__', perf automatically creates an
event for it.
For example:
# perf record -e ./test_bpf_trace.c usleep 100000
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data (2 samples) ]
# perf script
usleep 4639 [000] 261895.307826: 0 __bpf_stdout__: ffffffff810eb9a1 ...
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
usleep 4639 [000] 261895.407883: 0 __bpf_stdout__: ffffffff8105d609 ...
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
perf record -e ./test_bpf_trace.c usleep 100000
equals to:
perf record -e bpf-output/no-inherit=1,name=__bpf_stdout__/ \
-e ./test_bpf_trace.c/map:__bpf_stdout__.event=__bpf_stdout__/ \
usleep 100000
Where test_bpf_trace.c is:
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
#define SEC(NAME) __attribute__((section(NAME), used))
static u64 (*ktime_get_ns)(void) =
(void *)BPF_FUNC_ktime_get_ns;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
static int (*get_smp_processor_id)(void) =
(void *)BPF_FUNC_get_smp_processor_id;
static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) =
(void *)BPF_FUNC_perf_event_output;
struct bpf_map_def SEC("maps") __bpf_stdout__ = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
static inline int __attribute__((always_inline))
func(void *ctx, int type)
{
char output_str[] = "Raise a BPF event!";
char err_str[] = "BAD %d\n";
int err;
err = perf_event_output(ctx, &__bpf_stdout__, get_smp_processor_id(),
&output_str, sizeof(output_str));
if (err)
trace_printk(err_str, sizeof(err_str), err);
return 1;
}
SEC("func_begin=sys_nanosleep")
int func_begin(void *ctx) {return func(ctx, 1);}
SEC("func_end=sys_nanosleep%return")
int func_end(void *ctx) { return func(ctx, 2);}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
Committer note:
Testing with 'perf trace':
# trace -e nanosleep --ev test_bpf_stdout.c usleep 1
0.007 ( 0.007 ms): usleep/729 nanosleep(rqtp: 0x7ffc5bbc5fe0) ...
0.007 ( ): __bpf_stdout__:Raise a BPF event!..)
0.008 ( ): perf_bpf_probe:func_begin:(ffffffff81112460))
0.069 ( ): __bpf_stdout__:Raise a BPF event!..)
0.070 ( ): perf_bpf_probe:func_end:(ffffffff81112460 <- ffffffff81003d92))
0.072 ( 0.072 ms): usleep/729 ... [continued]: nanosleep()) = 0
#
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460128045-97310-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
d78885739a |
perf bpf: Clone bpf stdout events in multiple bpf scripts
This patch allows cloning bpf-output event configuration among multiple
bpf scripts. If there exist a map named '__bpf_output__' and not
configured using 'map:__bpf_output__.event=', this patch clones the
configuration of another '__bpf_stdout__' map. For example, following
command:
# perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:__bpf_stdout__.event=evt/ \
--ev ./test_bpf_trace2.c usleep 100000
equals to:
# perf trace --ev bpf-output/no-inherit,name=evt/ \
--ev ./test_bpf_trace.c/map:__bpf_stdout__.event=evt/ \
--ev ./test_bpf_trace2.c/map:__bpf_stdout__.event=evt/ \
usleep 100000
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1460128045-97310-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
03e0a7df3e |
perf tools: Introduce bpf-output event
Commit
|
||
|
Wang Nan
|
2d055bf253 |
perf tools: Support setting different slots in a BPF map separately
This patch introduces basic facilities to support config different slots in a BPF map one by one. array.nr_ranges and array.ranges are introduced into 'struct parse_events_term', where ranges is an array of indices range (start, length) which will be configured by this config term. nr_ranges is the size of the array. The array is passed to 'struct bpf_map_priv'. To indicate the new type of configuration, BPF_MAP_KEY_RANGES is added as a new key type. bpf_map_config_foreach_key() is extended to iterate over those indices instead of all possible keys. Code in this commit will be enabled by following commit which enables the indices syntax for array configuration. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-8-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wang Nan
|
7630b3e28d |
perf tools: Enable passing event to BPF object
A new syntax is added to the parser so that the user can access
predefined perf events in BPF objects.
After this patch, BPF programs for perf are finally able to utilize
bpf_perf_event_read() introduced in commit
|
||
|
Wang Nan
|
8690a2a773 |
perf record: Apply config to BPF objects before recording
bpf__apply_obj_config() is introduced as the core API to apply object
config options to all BPF objects. This patch also does the real work
for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value
stored in map's private field into the BPF map.
This patch is required because we are not always able to set all BPF
config during parsing. Further patch will set events created by perf to
BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until
perf_evsel__open().
bpf_map_foreach_key() is introduced to iterate over each key needs to be
configured. This function would be extended to support more map types
and different key settings.
In perf record, before start recording, call bpf__apply_config() to turn
on all BPF config options.
Test result:
# cat ./test_bpf_map_1.c
/************************ BEGIN **************************/
#include <uapi/linux/bpf.h>
#define SEC(NAME) __attribute__((section(NAME), used))
struct bpf_map_def {
unsigned int type;
unsigned int key_size;
unsigned int value_size;
unsigned int max_entries;
};
static void *(*map_lookup_elem)(struct bpf_map_def *, void *) =
(void *)BPF_FUNC_map_lookup_elem;
static int (*trace_printk)(const char *fmt, int fmt_size, ...) =
(void *)BPF_FUNC_trace_printk;
struct bpf_map_def SEC("maps") channel = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(int),
.max_entries = 1,
};
SEC("func=sys_nanosleep")
int func(void *ctx)
{
int key = 0;
char fmt[] = "%d\n";
int *pval = map_lookup_elem(&channel, &key);
if (!pval)
return 0;
trace_printk(fmt, sizeof(fmt), *pval);
return 0;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
/************************* END ***************************/
# echo "" > /sys/kernel/debug/tracing/trace
# ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
# ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.012 MB perf.data ]
# cat /sys/kernel/debug/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 1/1 #P:8
[SNIP]
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
usleep-18593 [007] d... 2394714.395539: : 11
usleep-19000 [006] d... 2394831.057840: : 101
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
066dacbf2a |
perf bpf: Add API to set values to map entries in a bpf object
bpf__config_obj() is introduced as a core API to config BPF object after
loading. One configuration option of maps is introduced. After this
patch BPF object can accept assignments like:
map:my_map.value=1234
(map.my_map.value looks pretty. However, there's a small but hard to fix
problem related to flex's greedy matching. Please see [1]. Choose ':'
to avoid it in a simpler way.)
This patch is more complex than the work it does because the
consideration of extension. In designing BPF map configuration, the
following things should be considered:
1. Array indices selection: perf should allow user setting different
value for different slots in an array, with syntax like:
map:my_map.value[0,3...6]=1234;
2. A map should be set by different config terms, each for a part
of it. For example, set each slot to the pid of a thread;
3. Type of value: integer is not the only valid value type. A perf
counter can also be put into a map after commit
|
||
|
Wang Nan
|
80cdce7666 |
perf bpf: Rename bpf_prog_priv__clear() to clear_prog_priv()
The name of bpf_prog_priv__clear() doesn't follow perf's naming convention. bpf_prog_priv__delete() seems to be a better name. However, bpf_prog_priv__delete() should be a method of 'struct bpf_prog_priv', but its first parameter is 'struct bpf_program'. It is callback from libbpf to clear priv structures when destroying a bpf program. It is actually a method of bpf_program (libbpf object), but bpf_program__ functions should be provided by libbpf. This patch removes the prefix of that function. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1455882283-79592-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wang Nan
|
0bb9349017 |
perf bpf: Rename bpf config to program config
Following patches are going to introduce BPF object level configuration to enable setting values into BPF maps. To avoid confusion, this patch renames existing 'config' in bpf-loader.c to 'program config'. Following patches would introduce 'object config'. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1448614067-197576-4-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wang Nan
|
d35b32891a |
perf bpf: Use same BPF program if arguments are identical
This patch allows creating only one BPF program for different
'probe_trace_event'(tev) entries generated by one
'perf_probe_event'(pev) if their prologues are identical.
This is done by comparing the argument list of different tev instances,
and the maps type of prologue and tev using a mapping array. This patch
utilizes qsort to sort the tevs. After sorting, tevs with identical
argument lists will be grouped together.
Test result:
Sample BPF program:
#define SEC(NAME) __attribute__((section(NAME), used))
SEC("inlines=no;"
"func=SyS_dup? oldfd")
int func(void *ctx)
{
return 1;
}
It would probe at SyS_dup2 and SyS_dup3, obtaining oldfd as its
argument.
The following cmdline shows a BPF program being loaded into the kernel
by perf:
# perf record -e ./test_bpf_arg.c sleep 4 & sleep 1 && ls /proc/$!/fd/ -l | grep bpf-prog
Before this patch:
# perf record -e ./test_bpf_arg.c sleep 4 & sleep 1 && ls /proc/$!/fd/ -l | grep bpf-prog
[1] 24858
lrwx------ 1 root root 64 Nov 14 04:09 3 -> anon_inode:bpf-prog
lrwx------ 1 root root 64 Nov 14 04:09 4 -> anon_inode:bpf-prog
...
After this patch:
# perf record -e ./test_bpf_arg.c sleep 4 & sleep 1 && ls /proc/$!/fd/ -l | grep bpf-prog
[1] 25699
lrwx------ 1 root root 64 Nov 14 04:10 3 -> anon_inode:bpf-prog
...
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447749170-175898-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
a08357d8dc |
perf bpf: Generate prologue for BPF programs
This patch generates a prologue for each 'struct probe_trace_event' for fetching arguments for BPF programs. After bpf__probe(), iterate over each program to check whether prologues are required. If none of the 'struct perf_probe_event' programs will attach to have at least one argument, simply skip preprocessor hooking. For those who a prologue is required, call bpf__gen_prologue() and paste the original instruction after the prologue. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447675815-166222-12-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
He Kuang
|
bfc077b4cf |
perf bpf: Add prologue for BPF programs for fetching arguments
This patch generates a prologue for a BPF program which fetches arguments for
it. With this patch, the program can have arguments as follow:
SEC("lock_page=__lock_page page->flags")
int lock_page(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
This patch passes at most 3 arguments from r3, r4 and r5. r1 is still the ctx
pointer. r2 is used to indicate if dereferencing was done successfully.
This patch uses r6 to hold ctx (struct pt_regs) and r7 to hold stack pointer
for result. Result of each arguments first store on stack:
low address
BPF_REG_FP - 24 ARG3
BPF_REG_FP - 16 ARG2
BPF_REG_FP - 8 ARG1
BPF_REG_FP
high address
Then loaded into r3, r4 and r5.
The output prologue for offn(...off2(off1(reg)))) should be:
r6 <- r1 // save ctx into a callee saved register
r7 <- fp
r7 <- r7 - stack_offset // pointer to result slot
/* load r3 with the offset in pt_regs of 'reg' */
(r7) <- r3 // make slot valid
r3 <- r3 + off1 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7 // result put onto stack
call probe_read // read unsafe pointer
jnei r0, 0, err // error checking
r3 <- (r7) // read result
r3 <- r3 + off2 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7
call probe_read
jnei r0, 0, err
...
/* load r2, r3, r4 from stack */
goto success
err:
r2 <- 1
/* load r3, r4, r5 with 0 */
goto usercode
success:
r2 <- 0
usercode:
r1 <- r6 // restore ctx
// original user code
If all of arguments reside in register (dereferencing is not
required), gen_prologue_fastpath() will be used to create
fast prologue:
r3 <- (r1 + offset of reg1)
r4 <- (r1 + offset of reg2)
r5 <- (r1 + offset of reg3)
r2 <- 0
P.S.
eBPF calling convention is defined as:
* r0 - return value from in-kernel function, and exit value
for eBPF program
* r1 - r5 - arguments from eBPF program to in-kernel function
* r6 - r9 - callee saved registers that in-kernel function will
preserve
* r10 - read-only frame pointer to access stack
Committer note:
At least testing if it builds and loads:
# cat test_probe_arg.c
struct pt_regs;
__attribute__((section("lock_page=__lock_page page->flags"), used))
int func(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
# perf record -e ./test_probe_arg.c usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
# perf evlist
perf_bpf_probe:lock_page
#
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
03e01f5687 |
perf bpf: Allow BPF program config probing options
By extending the syntax of BPF object section names, this patch allows users to
config probing options like what they can do in 'perf probe'.
The error message in 'perf probe' is also updated.
Test result:
For following BPF file test_probe_glob.c:
# cat test_probe_glob.c
__attribute__((section("inlines=no;func=SyS_dup?"), used))
int func(void *ctx)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
#
# ./perf record -e ./test_probe_glob.c ls /
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# ./perf evlist
perf_bpf_probe:func_1
perf_bpf_probe:func
After changing "inlines=no" to "inlines=yes":
# ./perf record -e ./test_probe_glob.c ls /
...
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# ./perf evlist
perf_bpf_probe:func_3
perf_bpf_probe:func_2
perf_bpf_probe:func_1
perf_bpf_probe:func
Then test 'force':
Use following program:
# cat test_probe_force.c
__attribute__((section("func=sys_write"), used))
int funca(void *ctx)
{
return 1;
}
__attribute__((section("force=yes;func=sys_write"), used))
int funcb(void *ctx)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
#
# perf record -e ./test_probe_force.c usleep 1
Error: event "func" already exists.
Hint: Remove existing event by 'perf probe -d'
or force duplicates by 'perf probe -f'
or set 'force=yes' in BPF source.
event syntax error: './test_probe_force.c'
\___ Probe point exist. Try 'perf probe -d "*"' and set 'force=yes'
(add -v to see detail)
...
Then replace 'force=no' to 'force=yes':
# vim test_probe_force.c
# perf record -e ./test_probe_force.c usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data ]
# perf evlist
perf_bpf_probe:func_1
perf_bpf_probe:func
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
5dbd16c0c9 |
perf bpf: Allow attaching BPF programs to modules symbols
By extending the syntax of BPF object section names, this patch allows
users to attach BPF programs to symbols in modules. For example:
SEC("module=i915;"
"parse_cmds=i915_parse_cmds")
int parse_cmds(void *ctx)
{
return 1;
}
The implementation is very simple: like what 'perf probe' does, for module,
fill 'uprobe' field in 'struct perf_probe_event'. Other parts will be done
automatically.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
361f2b1d1d |
perf bpf: Allow BPF program attach to uprobe events
This patch adds a new syntax to the BPF object section name to support
probing at uprobe event. Now we can use BPF program like this:
SEC(
"exec=/lib64/libc.so.6;"
"libcwrite=__write"
)
int libcwrite(void *ctx)
{
return 1;
}
Where, in section name of a program, before the main config string, we
can use 'key=value' style options. Now the only option key is "exec",
for uprobes.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1447675815-166222-4-git-send-email-wangnan0@huawei.com
[ Changed the separator from \n to ; ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
ba1fae431e |
perf test: Add 'perf test BPF'
This patch adds BPF testcase for testing BPF event filtering. By utilizing the result of 'perf test LLVM', this patch compiles the eBPF sample program then test its ability. The BPF script in 'perf test LLVM' lets only 50% samples generated by epoll_pwait() to be captured. This patch runs that system call for 111 times, so the result should contain 56 samples. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446817783-86722-8-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wang Nan
|
d3e0ce3930 |
perf bpf: Improve BPF related error messages
A series of bpf loader related error codes were introduced to help error
reporting. Functions were improved to return these new error codes.
Functions which return pointers were adjusted to encode error codes into
return value using the ERR_PTR() interface.
bpf_loader_strerror() was improved to convert these error messages to
strings. It checks the error codes and calls libbpf_strerror() and
strerror_r() accordingly, so caller don't need to consider checking the
range of the error code.
In bpf__strerror_load(), print kernel version of running kernel and the
object's 'version' section to notify user how to fix his/her program.
v1 -> v2:
Use macro for error code.
Fetch error message based on array index, eliminate for-loop.
Print version strings.
Before:
# perf record -e ./test_kversion_nomatch_program.o sleep 1
event syntax error: './test_kversion_nomatch_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
After:
# perf record -e ./test_kversion_nomatch_program.o ls
event syntax error: './test_kversion_nomatch_program.o'
\___ 'version' (4.4.0) doesn't match running kernel (4.3.0)
SKIP
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com
[ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
6371ca3b54 |
bpf tools: Improve libbpf error reporting
In this patch, a series of libbpf specific error numbers and
libbpf_strerror() are introduced to help reporting errors.
Functions are updated to pass correct the error number through the
CHECK_ERR() macro.
All users of bpf_object__open{_buffer}() and bpf_program__title() in
perf are modified accordingly. In addition, due to the error codes
changing, bpf__strerror_load() is also modified to use them.
bpf__strerror_head() is also changed accordingly so it can parse libbpf
errors. bpf_loader_strerror() is introduced for that purpose, and will
be improved by the following patch.
load_program() is improved not to dump log buffer if it is empty. log
buffer is also used to deduce whether the error was caused by an invalid
program or other problem.
v1 -> v2:
- Using macro for error code.
- Fetch error message based on array index, eliminate for-loop.
- Use log buffer to detect the reason of failure. 3 new error code
are introduced to replace LIBBPF_ERRNO__LOAD.
In v1:
# perf record -e ./test_ill_program.o ls
event syntax error: './test_ill_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
# perf record -e ./test_kversion_nomatch_program.o ls
event syntax error: './test_kversion_nomatch_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
# perf record -e ./test_big_program.o ls
event syntax error: './test_big_program.o'
\___ Failed to load program: Validate your program and check 'license'/'version' sections in your object
SKIP
In v2:
# perf record -e ./test_ill_program.o ls
event syntax error: './test_ill_program.o'
\___ Kernel verifier blocks program loading
SKIP
# perf record -e ./test_kversion_nomatch_program.o
event syntax error: './test_kversion_nomatch_program.o'
\___ Incorrect kernel version
SKIP
(Will be further improved by following patches)
# perf record -e ./test_big_program.o
event syntax error: './test_big_program.o'
\___ Program too big
SKIP
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446817783-86722-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
7a0119468c |
perf bpf: Mute libbpf when '-v' not set
According to [1], libbpf should be muted. This patch reset info and warning message level to ensure libbpf doesn't output anything even if error happened. [1] http://lkml.kernel.org/r/20151020151255.GF5119@kernel.org Committer note: Before: Testing it with an incompatible kernel version in the .c file that generated foo.o: [root@zoo ~]# perf record -e /tmp/foo.o sleep 1 libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: libbpf: -- END LOG -- libbpf: failed to load program 'fork=_do_fork' libbpf: failed to load object '/tmp/foo.o' event syntax error: '/tmp/foo.o' \___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel? (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events [root@zoo ~]# After: [root@zoo ~]# perf record -e /tmp/foo.o sleep 1 event syntax error: '/tmp/foo.o' \___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel? (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events [root@zoo ~]# This, BTW, need fixing to emit a proper message by validating the version in the foo.o "version" ELF section against the running kernel, warning the user instead of asking the kernel to load a binary that it will refuse due to unmatching kernel version. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446547486-229499-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Wang Nan
|
d509db0473 |
perf tools: Compile scriptlets to BPF objects when passing '.c' to --event
This patch provides infrastructure for passing source files to --event
directly using:
# perf record --event bpf-file.c command
This patch does following works:
1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is
expanded to allow caller tell it whether the passed file is source
file or object.
2) llvm__compile_bpf() is called to compile the '.c' file, the result
is saved into memory. Use bpf_object__open_buffer() to load the
in-memory object.
Introduces a bpf-script-example.c so we can manually test it:
# perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1
Note that '--clang-opt' must put before '--event'.
Futher patches will merge it into a testcase so can be tested automatically.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
4edf30e39e |
perf bpf: Collect perf_evsel in BPF object files
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
1e5e3ee8ff |
perf tools: Load eBPF object into kernel
This patch utilizes bpf_object__load() provided by libbpf to load all
objects into kernel.
Committer notes:
Testing it:
When using an incorrect kernel version number, i.e., having this in your
eBPF proggie:
int _version __attribute__((section("version"), used)) = 0x40100;
For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event
parsing time, to provide a better error report to the user:
# perf record --event /tmp/foo.o sleep 1
libbpf: load bpf program failed: Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
libbpf: -- END LOG --
libbpf: failed to load program 'fork=_do_fork'
libbpf: failed to load object '/tmp/foo.o'
event syntax error: '/tmp/foo.o'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+
kernel, the whole process goes thru:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.202 MB perf.data ]
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
aa3abf30bb |
perf tools: Create probe points for BPF programs
This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.
By utilizing the new probing API, this patch creates probe points during
event parsing.
To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.
strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.
Committer note:
Trying it:
To build a test eBPF object file:
I am testing using a script I built from the 'perf test -v LLVM' output:
$ cat ~/bin/hello-ebpf
export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
export WORKING_DIR=/lib/modules/4.2.0/build
export CLANG_SOURCE=-
export CLANG_OPTIONS=-xc
OBJ=/tmp/foo.o
rm -f $OBJ
echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ
---
First asking to put a probe in a function not present in the kernel
(misses the initial _):
$ perf record --event /tmp/foo.o sleep 1
Probe point 'do_fork' not found.
event syntax error: '/tmp/foo.o'
\___ You need to check probing points in BPF file
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
---
Now, with "__attribute__((section("fork=_do_fork"), used)):
$ grep _do_fork /proc/kallsyms
ffffffff81099ab0 T _do_fork
$ perf record --event /tmp/foo.o sleep 1
Failed to open kprobe_events: Permission denied
event syntax error: '/tmp/foo.o'
\___ Permission denied
---
Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.
Lets try as root instead:
# perf record --event /tmp/foo.o sleep 1
Lowering default frequency rate to 1000.
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# perf evlist
/tmp/foo.o
[root@felicio ~]# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
---
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Wang Nan
|
69d262a93a |
perf ebpf: Add the libbpf glue
The 'bpf-loader.[ch]' files are introduced in this patch. Which will be the interface between perf and libbpf. bpf__prepare_load() resides in bpf-loader.c. Following patches will enrich these two files. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |