Commit Graph

1177 Commits

Author SHA1 Message Date
Linus Torvalds 4b42745211 ARM: SoC platform updates for 4.20
A couple of platforms change hands in the MAINTAINERS file:
 
 - Linus Walleij lists himself for the ARM Reference platforms:
   versatile, vexpress, integrator and realview. He has been the main
   contributor for these for a while, and makes it official now.
 
 - Vladimir Zapolskiy takes over the LPC18xx platform from Joachim Eastwood
 
 - Manivannan Sadhasivam becomes a secondary maintainer for the
   Actions Semi machines
 
 - Nicolas Ferre lists updates the MAINTAINER listing for the AT91
   platform: Ludovic Desroches is now a co-maintainer for the platform, and
   several other people (Claudiu Beznea, Cristian Birsan, Eugen Hristev,
   Codrin Ciubotariu) take over individual device drivers.
 
 Thanks everyone for working on this, and welcome to the new maintainers!
 
 The "virt" platform on qemy or kvm can now be used in big-endian mode
 without additional tricks, thanks to Jason Donenfeld.
 
 Once again, we gain support for another NXP i.MX6 variant, this time
 it's the i.MX 6ULZ 32-bit single-core version.
 
 On arm64, we add support for two SoCs from Renesas: RZ/G2E (r8a774c0)
 and RZ/G2M (r8a774a1). These are described as microcontrollers on the
 manufacturer website, but appear to be rather powerful. The RZ/G2M is
 used on the reference board for the CIP Super Long Term Support (SLTS)
 Linux Kernels.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb1zkcAAoJEGCrR//JCVInEmgP/0hvJ+UqG2LrNpveuQNcEBPn
 Dp+B+xMlgzL/Z+jzNEjH05SSHvc4pkvu6OP/XvZJYK6jSAH2MGgmSowmRzVyOhE3
 qGFk67+5UJBdwfkFzKDrN0GlEhUOgX8pjFIWHDyo3IXVZfaPJP1BjHy9SdoSYF7a
 AqvxTPbIw8nJScjqJQ67MusMbGoPnUQH4229sGu3Gix3auBPe0NHl0kCGtWAYkr/
 F81Vooz/WCo0Hj7cztWI7NjJHlnIuEe6LwbbN5NdP5koMSjI4AAvh427xsbvPk0a
 N38QFgCI0d/pjRJA2MJVl3UAog/r37Bs7PIRwUXWGv0CboZYQiLKHuuRTcaCzrSt
 zdiysLo36nEL+8kQe7VRpfD8hOzB9+jNkpvdvp5I3qk+qJscjsheQryXiNt+SeQ/
 lHIBAldNNr++qVkLJwqMEW1+948zmNg0cU8NP6t+KEIYJG7bM5fUpUHmfeRXqmpc
 RVXC4YBBzcnkTn3TUCvWEn5xxedd6TX+2D6hJCL7mfbdoqeWQPnfBEvYASx/PHVo
 mMczvF/XCrJJOQFXiFqIh0JCR/LC/eBpfr8JNDQ7tmkSzjp1pRxVTny7tI2BgwiA
 GXmuQ7rZUpKLnm6U6qN0Yb2ZRYKtXuGulucDUPFyp3pcqjRi9fqRT8al1a/wNPIO
 cTQgeFL1xfZb11I3U6NG
 =7+46
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "A couple of platforms change hands in the MAINTAINERS file:

   - Linus Walleij lists himself for the ARM Reference platforms:
     versatile, vexpress, integrator and realview. He has been the main
     contributor for these for a while, and makes it official now.

   - Vladimir Zapolskiy takes over the LPC18xx platform from Joachim
     Eastwood

   - Manivannan Sadhasivam becomes a secondary maintainer for the
     Actions Semi machines

   - Nicolas Ferre lists updates the MAINTAINER listing for the AT91
     platform: Ludovic Desroches is now a co-maintainer for the
     platform, and several other people (Claudiu Beznea, Cristian
     Birsan, Eugen Hristev, Codrin Ciubotariu) take over individual
     device drivers.

  Thanks everyone for working on this, and welcome to the new
  maintainers!

  The "virt" platform on qemy or kvm can now be used in big-endian mode
  without additional tricks, thanks to Jason Donenfeld.

  Once again, we gain support for another NXP i.MX6 variant, this time
  it's the i.MX 6ULZ 32-bit single-core version.

  On arm64, we add support for two SoCs from Renesas: RZ/G2E (r8a774c0)
  and RZ/G2M (r8a774a1). These are described as microcontrollers on the
  manufacturer website, but appear to be rather powerful. The RZ/G2M is
  used on the reference board for the CIP Super Long Term Support (SLTS)
  Linux Kernels"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  MAINTAINERS: Assign myself as a maintainer of ARM/LPC18XX architecture
  arm64: exynos: Enable generic power domain support
  MAINTAINERS: remove non-exsiting email address of Baoyou
  MAINTAINERS: fix pattern in ARM/Synaptics berlin SoC section
  MAINTAINERS: Drop dt-bindings/genpd/k2g.h
  ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms
  arm64: actions: Enable PINCTRL in platforms Kconfig
  MAINTAINERS: Add entry for Actions Semi Owl SoCs DMA driver
  MAINTAINERS: Add entry for Actions Semiconductor Owl I2C driver
  MAINTAINERS: Update clock binding entry for Actions Semi Owl SoCs
  ARM: imx: add i.mx6ulz msl support
  ARM: Assume maintainership of ARM reference designs
  ARM: support big-endian for the virt architecture
  MAINTAINERS: sdhci: move the Microchip entry to proper location
  MAINTAINERS: move former ATMEL entries to proper MICROCHIP location
  MAINTAINERS: remove the / ATMEL string from MICROCHIP entries
  MAINTAINERS: iio: add co-maintainer to SAMA5D2-compatible ADC driver
  MAINTAINERS: pwm: add entry for Microchip pwm driver
  MAINTAINERS: dmaengine: add files to Microchip dma entry
  MAINTAINERS: USB: change maintainer for Microchip USBA gadget driver
  ...
2018-10-29 15:37:33 -07:00
zhong jiang 95590a6286 ARM: at91: pm: call put_device instead of of_node_put in at91_pm_config_ws
of_find_device_by_node takes a reference to the struct device when it
finds a match via get_device. but it fails to put_device in
at91_pm_config_ws, for_each_matching_node_and_match will get and put
the node properly, there is no need to call the of_put_node. Therefore,
just call put_device instead of of_node_put in at91_pm_config_ws.

Fixes: d7484f5c6b ("ARM: at91: pm: configure wakeup sources for ULP1 mode")
Suggested-by: Claudiu Beznea <Claudiu.Beznea@microchip.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-25 12:26:17 +02:00
Claudiu Beznea 9f7195da31 power: reset: at91-poweroff: switch to slow clock before shutdown
The SAMA5D2 NRST input signal is resynchronized with the SLCK clock and it
can take up to 2 SLCK cycles (about 90us) for the internal reset to be
effective. During this delay, the VDDCORE current consumption may still be
high (application-dependent) with the VDDCORE regulator already OFF. Under
such conditions, VDDCORE may operate below its operating range leading to
potential register corruption.

To prevent such situation, it is recommended to decrease significantly the
power consumption of the device once the voltage regulator is  turned-off.
This can be achieved by operating the device at a much lower low frequency.

To solve this switch the master clock to slock clock just before writing
shutdown command to shutdown controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Suggested-by: Patrice Vilchez <patrice.vilchez@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2018-09-16 12:31:48 +02:00
Claudiu Beznea 1e1f808f9d ARM: at91: pm: remove pm_bu initialization in at91_pm_backup_init()
There is no need to initialize pm_bu since it is used only if backup
mode is selected. In case backup mode initialization fails (which means
pm_bu is invalid) the ULP0 mode will be selected.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-27 17:10:13 +02:00
Linus Torvalds 2f34a64aea ARM: Device-tree updates
Business as usual -- the bulk of our changes are to devicetree files
 with new hardware support, new SoCs and platforms, and new board types.
 
 New SoCs/platforms:
  - Raspberry Pi Compute Module (CM1) and IO board
  - i.MX6SSL from NXP
  - Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN and
    PLC interfaces
  - TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
    controllers, communication and PRU subsystem and lots of other
    interfaces (PCIe, USB3, etc).
 
 New boards and systems:
  - Several Atmel at91-based boards from Laird
  - Marvell Armada388-based Helios4 board from SolidRun
  - Samsung Aires-based phones (s5pv210)
  - Allwinner A64-based Pinebook laptop
 
 In addition to the above, there's the usual amount of new devices
 described on existing platforms, fixes and tweaks and new minor variants
 of boards/platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlt+NecPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3ScQQAIic6NPWiqGEwTRN1I+WoyoCt8oTGgiiu1kf
 h23RaLWI+TaEpR1yg5ko6wGlxlvBG1C/u2sOc0lD9nSt9JQ3evXXwMQ0bUNhKdSE
 8z3jhpnJYu5iNDsB15XfznhivpjOQUQNQXPR1/PG9j6SCKgdWi6wYR+A+q98Pe9d
 otzMizQOY0QUMYAec20Zvzgfs+AvEtOAo/w5K4tRb+Fv/EVixV8bVeT4uykxunFt
 6xOM0Ssvnwo3AnEh+V+FjAL8khMC7A3JC+/emXqqcw1Ogdg/GSnxriL7v6LchcwH
 fvYb8hujQCcZ0+mlN0W214RkWd1xAc0CwJ0JdKw/RMnskty5u5B7gXcDyZFw1oJ7
 b7Uof7N8l12lsXTqWW8CKOHupI1gxYshi0QJzkgkfY6P3h8ntE8HJhhcgjcHE0AN
 3mMjhzbDGjfUykVgS2rFpR6tm3JHT13jDl88jhAT+xtuYYxy60nqPBM9MD6jIzjF
 BnIVJBNX3sYa7aheEnZFBuA/Af/05fKbpUVQTNwnfq2f6NYDAbF9iBkCHepudZBa
 0U+tNHuDlVXwLXoocE1Nac5IJgPiuX2bsuJ9xHKLXb6hMr9L4YtPOaKwDaJb1hTZ
 XIHhlrF9w0ig9gu3IxaE+rC3hfu965CeFws0kwSZ9l52xmSP0Yi22ebSTfP6+h+u
 XLyOhpp8
 =J0qC
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Olof Johansson:
 "Business as usual -- the bulk of our changes are to devicetree files
  with new hardware support, new SoCs and platforms, and new board
  types.

  New SoCs/platforms:
   - Raspberry Pi Compute Module (CM1) and IO board
   - i.MX6SSL from NXP
   - Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN
     and PLC interfaces
   - TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
     controllers, communication and PRU subsystem and lots of other
     interfaces (PCIe, USB3, etc).

  New boards and systems:
   - Several Atmel at91-based boards from Laird
   - Marvell Armada388-based Helios4 board from SolidRun
   - Samsung Aires-based phones (s5pv210)
   - Allwinner A64-based Pinebook laptop

  In addition to the above, there's the usual amount of new devices
  described on existing platforms, fixes and tweaks and new minor
  variants of boards/platforms"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits)
  arm64: dts: sdm845: Add tsens nodes
  arm64: dts: msm8996: thermal: Initialise via DT and add second controller
  arm64: dts: sprd: Add one suspend timer
  arm64: dts: sprd: Add SC27XX ADC device
  arm64: dts: sprd: Add SC27XX eFuse device
  arm64: dts: sprd: Add SC27XX vibrator device
  arm64: dts: sprd: Add SC27XX breathing light controller device
  arm64: dts: meson-axg: add spdif-dit codec
  arm64: dts: meson-axg: add lineout codec
  arm64: dts: meson-axg: add linein codec
  arm64: dts: meson-axg: add tdm interfaces
  arm64: dts: meson-axg: add tdmout formatters
  arm64: dts: meson-axg: add tdmin formatters
  arm64: dts: meson-axg: add spdifout
  arm64: dts: rockchip: add led support for Firefly-RK3399
  arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
  arm64: dts: rockchip: add power button support for Firefly-RK3399
  ARM: dts: aspeed: Add coprocessor interrupt controller
  arm64: dts: meson-axg: add audio arb reset controller
  arm64: dts: meson-axg: add usb power regulator
  ...
2018-08-23 14:02:22 -07:00
Linus Torvalds 9e259f9352 ARM: 32-bit SoC platform updates
Most of the SoC updates in this cycle are cleanups and moves to more
 modern infrastructure:
  - Davinci was moved to common clock framework
  - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the
    keyboard interface (bitbanged AT keyboard via GPIO).
  - Removal of some stale code for Renesas platforms
  - Power management improvements for i.MX6LL
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlt+Lh0PHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3Y+YP/2QVT1T1/Fz3WsuLg7BYa6r51BDxvr/pSQKh
 eqLhZCcI5RpOlW4noWgJXWqnX2AlR1vX6xe0W0ebj177ttUHmidUQUJCpwP39AGE
 LrVC2+mlFb3uPx0HlpHsx3zFZdNFfrhl5mN3JbZfnLv0fUibVEhR+K8ii7MV1/Fk
 Lbo9sVPT8GIJuU6uyTTUnsCufwCkARMhrYbO6cbtS0FCO77a5aHp7btvHZ2ykxwh
 hG9CI3FhfAP3Tkpm+IbHkC5jYQNRewQoqthzJ4WJbRrcdA/vaArBTOUoZG4NFMOM
 M3B4jd1x26llmQhUqH4kGeOZiQ714GPrKcGS+8w7Twj5sIRGDxpif2Ac0kKL2B8X
 Ps6UTM0cb63W9I+TphjLysKSarNjR2lVVhNVoJ8P47MSyDGIRpSR7+IWvlJ7U8vz
 1yMWCguwrwZH3DnQb8UINTfI1Y1RstmtO5v8paSqfJyFX5r64x6VfYso1fRzxyFE
 4r2TS0HRv117aKkHwY8smjielZ0CpGnyEDQgq9Z72V4FueIqsJQrA3oGYXgTArFl
 mLL+fJUdwPv00nWuAZ8q0wIj1NvJvksJy+cObZXL6HK9m3cSdYwOHipdG86k20S5
 6/KMPmgrMbV9YO3lVtfJZjdu2QTBiYVBPGfsiSo5lVL5Q5rDYV9QBijnE+9W9/yT
 tJ038MhK
 =ACVk
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 32-bit SoC platform updates from Olof Johansson:
 "Most of the SoC updates in this cycle are cleanups and moves to more
  modern infrastructure:

   - Davinci was moved to common clock framework

   - OMAP1-based Amstrad E3 "Superphone" saw a bunch of cleanups to the
     keyboard interface (bitbanged AT keyboard via GPIO).

   - Removal of some stale code for Renesas platforms

   - Power management improvements for i.MX6LL"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (112 commits)
  ARM: uniphier: select RESET_CONTROLLER
  arm64: uniphier: select RESET_CONTROLLER
  ARM: uniphier: remove empty Makefile
  ARM: exynos: Clear global variable on init error path
  ARM: exynos: Remove outdated maintainer information
  ARM: shmobile: Always enable ARCH_TIMER on SoCs with A7 and/or A15
  ARM: shmobile: r8a7779: hide unused r8a7779_platform_cpu_kill
  soc: r9a06g032: don't build SMP files for non-SMP config
  ARM: shmobile: Add the R9A06G032 SMP enabler driver
  ARM: at91: pm: configure wakeup sources for ULP1 mode
  ARM: at91: pm: add PMC fast startup registers defines
  ARM: at91: pm: Add ULP1 mode support
  ARM: at91: pm: Use ULP0 naming instead of slow clock
  ARM: hisi: handle of_iomap and fix missing of_node_put
  ARM: hisi: check of_iomap and fix missing of_node_put
  ARM: hisi: fix error handling and missing of_node_put
  ARM: mx5: Set the DBGEN bit in ARM_GPC register
  ARM: imx51: Configure M4IF to avoid visual artifacts
  ARM: imx: call imx6sx_cpuidle_init() conditionally for 6sll
  ARM: imx: fix i.MX6SLL build
  ...
2018-08-23 13:44:43 -07:00
Linus Torvalds db06f826ec The new and exciting feature this time around is in the clk core.
We've added duty cycle support to the clk API so that clk signal
 duty cycle ratios can be adjusted while taking into account things
 like clk dividers and clk tree hierarchy. So far only one SoC has
 implemented support for this, but I expect there will be more to
 come in the future.
 
 Outside of the core, we have the usual pile of clk driver updates
 and additions. The Amlogic meson driver got the most lines in the
 diffstat this time around because it added support for a whole bunch
 of hardware and duty cycle configuration. After that the Rockchip PX30,
 Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the diff.
 We're left with the collection of non-critical fixes after that. Overall
 it looks pretty quiet this time.
 
 Core:
  - Clk duty cycle support
  - Proper CLK_SET_RATE_GATE support throughout the tree
 
 New Drivers:
  - Actions Semi Owl series S700 SoC clk driver
  - Qualcomm SDM845 display clock controller
  - i.MX6SX ocram_s clk support
  - Uniphier NAND, USB3 PHY, and SPI clk support
  - Qualcomm RPMh clk driver
  - i.MX7D mailbox clk support
  - Maxim 9485 Programmable Clock Generator
  - Expose 32 kHz PLL on PXA SoCs
  - imx6sll GPIO clk gate support
  - Atmel at91 I2S audio clk support
  - SI544/SI514 clk on/off support
  - i.MX6UL GPIO clock gates in CCM CCGR
  - Renesas Crypto Engine clocks on R-Car H3
  - Renesas clk support for the new RZ/N1D SoC
  - Allwinner A64 display engine clock support
  - Support for Rockchip's PX30 SoC
  - Amlogic Meson axg PCIe and audio clocks
  - Amlogic Meson GEN CLK on gxbb, gxl and axg
 
 Updates:
  - Remove an unused variable from Exynos4412 ISP driver
  - Fix a thinko bug in SCMI clk division logic
  - Add missing of_node_put()s in some i.MX clk drivers
  - Tegra SDMMC clk jitter improvements with high speed signaling modes
  - SPDX tagging for qcom and cs2000-cp drivers
  - Stop leaking con ids in __clk_put()
  - Fix a corner case in fixed factor clk probing where node is in DT but
    parent clk is registered much later
  - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value
  - i.MX clk init arrays removed in place of CLK_IS_CRITICAL
  - Convert to CLK_IS_CRITICAL for i.MX51/53 driver
  - Fix Tegra BPMP driver oops when xlating a NULL clk
  - Proper default configuration for vic03 and vde clks on Tegra124
  - Mark Tegra memory controller clks as critical
  - Fix array bounds clamp in Tegra's emc determine_rate() op
  - Ingenic i2s bit update and allow UDC clk to gate
  - Fix name of aspeed SDC clk define to have only one 'CLK'
  - Fix i.MX6QDL video clk parent
  - Critical clk markings for qcom SDM845
  - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
  - Mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it supplying
    the pwm used to drive the logic supply of the rk3399 core.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlt0WD0RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSX5jBAAlMLb0fqnuAGNJeXZDk5rsCa496LMyGWx
 ku7uLA2H68SlbSQqq8FUPoCjDZkmsu2CbOX1U2/H4HFDS0pqpPiV3mZNtSeacedp
 4Wf8yUB5G3xdq9QUCSX5LxMmEQoGeJ+gaTspBvM6sNvEMBR2kEMGBqUy768tnDTR
 qCQ8Q1jOU6l8IdFV0SZGssmZ+oFqOyQoJVquPWPkw1+p/2f1KyYIyG5J5FXGxgcR
 1XQITY/I/dShQ2wd+ZeDdt+GjZqIXQ06Pt3ruRG7HVP79Zt1XCRJd5dZ2lf+Wj8T
 1ul3TWCAMYZ8gCPebLMbBGzKvQJQJcDU6DpIZsrUDN+C6z7KCS9vqeCxP9cF+3jJ
 LOmA6cWE7z9Vkk9s0I0KJJ2Sw7wRoXzE5OJcwa/yousSz3s9cX+F8SAkdZs77oUF
 0XnzPsvwdHI/egQ4UrsStPHM/gOFhsQqo8vvm5xaaTR2AxLKBHuPa9oUv9YpO/P5
 J6FCst3qeY3Wp69fJ5/Z058OFOAt81dKXij2fZJBOO4KJy7Kse8Sz5ApybXVAbY5
 lfvx+KGMITFqLYrcRIQZmlCuoHcMwI0FtHr9Ens5GXdbrJ+W+FlvP43eLCA0ZmRx
 9DidemChj3k3PC3H6tbax/jzV4IIxZdyUoBJ1imL4uyhhaXp/qr45A/aGwNp8Q8a
 WvkIGm3epK4=
 =Mcn+
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The new and exciting feature this time around is in the clk core.
  We've added duty cycle support to the clk API so that clk signal duty
  cycle ratios can be adjusted while taking into account things like clk
  dividers and clk tree hierarchy. So far only one SoC has implemented
  support for this, but I expect there will be more to come in the
  future.

  Outside of the core, we have the usual pile of clk driver updates and
  additions. The Amlogic meson driver got the most lines in the diffstat
  this time around because it added support for a whole bunch of
  hardware and duty cycle configuration. After that the Rockchip PX30,
  Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the
  diff. We're left with the collection of non-critical fixes after that.
  Overall it looks pretty quiet this time.

  Core:
   - Clk duty cycle support
   - Proper CLK_SET_RATE_GATE support throughout the tree

  New Drivers:
   - Actions Semi Owl series S700 SoC clk driver
   - Qualcomm SDM845 display clock controller
   - i.MX6SX ocram_s clk support
   - Uniphier NAND, USB3 PHY, and SPI clk support
   - Qualcomm RPMh clk driver
   - i.MX7D mailbox clk support
   - Maxim 9485 Programmable Clock Generator
   - expose 32 kHz PLL on PXA SoCs
   - imx6sll GPIO clk gate support
   - Atmel at91 I2S audio clk support
   - SI544/SI514 clk on/off support
   - i.MX6UL GPIO clock gates in CCM CCGR
   - Renesas Crypto Engine clocks on R-Car H3
   - Renesas clk support for the new RZ/N1D SoC
   - Allwinner A64 display engine clock support
   - support for Rockchip's PX30 SoC
   - Amlogic Meson axg PCIe and audio clocks
   - Amlogic Meson GEN CLK on gxbb, gxl and axg

  Updates:
   - remove an unused variable from Exynos4412 ISP driver
   - fix a thinko bug in SCMI clk division logic
   - add missing of_node_put()s in some i.MX clk drivers
   - Tegra SDMMC clk jitter improvements with high speed signaling modes
   - SPDX tagging for qcom and cs2000-cp drivers
   - stop leaking con ids in __clk_put()
   - fix a corner case in fixed factor clk probing where node is in DT
     but parent clk is registered much later
   - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return
     value
   - i.MX clk init arrays removed in place of CLK_IS_CRITICAL
   - convert to CLK_IS_CRITICAL for i.MX51/53 driver
   - fix Tegra BPMP driver oops when xlating a NULL clk
   - proper default configuration for vic03 and vde clks on Tegra124
   - mark Tegra memory controller clks as critical
   - fix array bounds clamp in Tegra's emc determine_rate() op
   - Ingenic i2s bit update and allow UDC clk to gate
   - fix name of aspeed SDC clk define to have only one 'CLK'
   - fix i.MX6QDL video clk parent
   - critical clk markings for qcom SDM845
   - fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
   - mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it
     supplying the pwm used to drive the logic supply of the rk3399
     core"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits)
  clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
  clk: cs2000-cp: convert to SPDX identifiers
  clk: scmi: Fix the rounding of clock rate
  clk: qcom: Add display clock controller driver for SDM845
  clk: mvebu: armada-37xx-periph: Remove unused var num_parents
  clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable
  clk: actions: Add S700 SoC clock support
  dt-bindings: clock: Add S700 support for Actions Semi Soc's
  clk: actions: Add missing REGMAP_MMIO dependency
  clk: uniphier: add clock frequency support for SPI
  clk: uniphier: add more USB3 PHY clocks
  clk: uniphier: add NAND 200MHz clock
  clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  clk: tegra: Add sdmmc mux divider clock
  clk: tegra: Refactor fractional divider calculation
  clk: tegra: Fix includes required by fence_udelay()
  clk: imx6sll: fix missing of_node_put()
  clk: imx6ul: fix missing of_node_put()
  clk: imx: add ocram_s clock for i.mx6sx
  clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent
  ...
2018-08-15 21:41:21 -07:00
Masahiro Yamada 6b0709f5a5 ARM: at91: remove unused duplicated filechk_offsets
The filechk_offsets in arch/arm/mach-at91/Makefile is never
used because it is always overridden by the equivalent one in
scripts/Makefile.lib

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-28 10:34:06 +09:00
Claudiu Beznea d7484f5c6b ARM: at91: pm: configure wakeup sources for ULP1 mode
Since for ULP1 PM mode of SAMA5D2 the wakeup sources are limited and
well known add a method to check if these wakeup sources are defined by
user (either via DT or filesystem). In case there are no wakeup sources
defined for ULP1 the PM suspend will fail, otherwise these will be
configured in fast startup registers of PMC. Since wakeup sources of
ULP1 need also to be configured in SHDWC registers the code was a bit
changed to map the SHDWC also in case ULP1 is requested by user (this
was done in the initialization phase). In case the ULP1 initialization
fails the ULP0 mode is used (this mode was also used in case backup mode
initialization failed).

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-17 15:08:12 +02:00
Wenyou Yang 5b56c182ed ARM: at91: pm: Add ULP1 mode support
In the ULP1 mode, in order to achieve the lowest power consumption
with the system in retention mode and be able to resume on the wake
up events, all the clocks are shut off, inclusive the embedded 12MHz
RC oscillator, and the number of wake up sources is limited as well.
When the wake up event is asserted, the embedded 12MHz RC oscillator
restarts automatically.

The ULP1 (Ultra Low-power mode 1) is introduced by SAMA5D2.

The previous size of pm_suspend.o was 2148 bytes. With the addition of
ULP1 mode the new size of pm_suspend.o raised at 2456 bytes.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
[claudiu.beznea@microchip.com: aligned with 4.18-rc1]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-17 15:08:02 +02:00
Claudiu Beznea 514e2a294a ARM: at91: pm: Use ULP0 naming instead of slow clock
Switch to use ULP0 naming instead of slow clock naming for power modes, to
be as closed as possible to datasheet. This commit does the necessary
renaming and macro addition to be as close as possible to the namings
from [1].

[1] https://lore.kernel.org/lkml/1470650705-31418-3-git-send-email-wenyou.yang@atmel.com

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-17 15:07:45 +02:00
Codrin Ciubotariu 96e4ea8c25 clk: at91: add I2S clock mux driver
This driver is a simple muxing driver that controls the
I2S's clock input by using syscon/regmap to change the parent.
The available inputs can be peripheral clock and generated clock.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
[sboyd@kernel.org: Fix SPDX tag comment style]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06 11:12:20 -07:00
Alexandre Belloni 91f87180e1 ARM: at91: fix USB clock detection handling
Add more compatibles to be able to correct the USB clock detection.

at91sam9261 and at91sam9263 have the same PMC_SCSR layout as at91sam9260.
at91sam9rl doesn't have any USB clock.

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-06-20 11:50:28 +02:00
Nicolas Ferre ed08b63c8b ARM: at91: Kconfig: Update company to Microchip
Update AT91 Kconfig text and help to move from Atmel to Microchip.
The AT91 wording is kept in the title for historical reasons.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-02-28 16:21:51 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Alexandre Belloni 093d79f62a ARM: at91: Replace uses of virt_to_phys with __pa_symbol
The PM code wrongly uses virt_to_phys() instead of __pa_symbol() and was
not updated by commit 64fc2a947a ("ARM: 8641/1: treewide: Replace uses of
virt_to_phys with __pa_symbol") because it was not yet in tree.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2017-09-18 10:05:38 +02:00
Linus Torvalds f60a2abfdb The diff is dominated by the Allwinner A10/A20 SoCs getting converted to
the sunxi-ng framework. Otherwise, the heavy hitters are various drivers
 for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other
 new clk drivers in here too but overall this is just a bunch of clk
 drivers for various different pieces of hardware and a collection of
 non-critical fixes for clk drivers.
 
 New Drivers:
  - Allwinner R40 SoCs
  - Renesas R-Car Gen3 USB 2.0 clock selector PHY
  - Atmel AT91 audio PLL
  - Uniphier PXs3 SoCs
  - ARC HSDK Board PLLs
  - AXS10X Board PLLs
  - STMicroelectronics STM32H743 SoCs
 
 Removed Drivers:
  - Non-compiling mb86s7x support
 
 Updates:
  - Allwinner A10/A20 SoCs converted to sunxi-ng framework
  - Allwinner H3 CPU clk fixes
  - Renesas R-Car D3 SoC
  - Renesas V2H and M3-W modules
  - Samsung Exynos5420/5422/5800 audio fixes
  - Rockchip fractional clk approximation fixes
  - Rockchip rk3126 SoC support within the rk3128 driver
  - Amlogic gxbb CEC32 and sd_emmc clks
  - Amlogic meson8b reset controller support
  - IDT VersaClock 5P49V5925/5P49V6901 support
  - Qualcomm MSM8996 SMMU clks
  - Various 'const' applications for struct clk_ops
  - si5351 PLL reset bugfix
  - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
  - Assorted Tegra clk driver fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJZuIAQAAoJEK0CiJfG5JUlUMQQAKFwCZRfTzz0m9jJ9s1XZSR/
 vldNAEUGm+Mz0W84xIzFqaT0UI1+SJK4e9Du+EN6phcCD5yVB0JS2EtRa84Bku/i
 Zy6AYSUNbGjx94HPwIq1hKt+UOIfBiNbJKMnkoCbEyYPA/TiWzr8JR5GyLjwYhPq
 IZHSvKqUKM3h2nr+MtpFJIIk8DlkLARRca4CCqa5i2Oqj6B8rjQQAq7TaLAM3ASN
 tSFIW2vdmWD+om2L57WHhwBgaYnUB4jBCRWkFZRsO4ZIRgm4VpePmosy2UTZ7fqb
 kEaW2bPuv65zUHpvjHG6yXo+yh0yk1fBsXG/joXgJ4oOmNzsIgnCZzPnGUC1ccms
 QdK/qhdIXsdgiR2DZtYuzUHji8+TNIPPjfAFyJjUwxDBXpqzXvsvltx2a1hg/rUP
 VDvTL2OnoGtrW2bXPufCkxBsyejJ4RqC5riMJws5xgMkqKKUajiLovPeuL6+8kU+
 ncqWYiIkEvHNKpmW511G/g+ClLk89zgXfxKFWWR+iDjSvA0hgaiRj1V3C2HIyS8f
 CLpalf6ao2+O008rUiaiqJyxWuwLujcdYokay2HXvTYc45rXrVwvlaDajxqs2eer
 lekUA4ZbX2g6qvB0lna6PNlv8JLQ1XPdzhWD2eeQIi7JgVSgwg++kUJqglsuai56
 eg5zNo6891GL9zFW10/A
 =0JbT
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The diff is dominated by the Allwinner A10/A20 SoCs getting converted
  to the sunxi-ng framework. Otherwise, the heavy hitters are various
  drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are
  some other new clk drivers in here too but overall this is just a
  bunch of clk drivers for various different pieces of hardware and a
  collection of non-critical fixes for clk drivers.

  New Drivers:
   - Allwinner R40 SoCs
   - Renesas R-Car Gen3 USB 2.0 clock selector PHY
   - Atmel AT91 audio PLL
   - Uniphier PXs3 SoCs
   - ARC HSDK Board PLLs
   - AXS10X Board PLLs
   - STMicroelectronics STM32H743 SoCs

  Removed Drivers:
   - Non-compiling mb86s7x support

  Updates:
   - Allwinner A10/A20 SoCs converted to sunxi-ng framework
   - Allwinner H3 CPU clk fixes
   - Renesas R-Car D3 SoC
   - Renesas V2H and M3-W modules
   - Samsung Exynos5420/5422/5800 audio fixes
   - Rockchip fractional clk approximation fixes
   - Rockchip rk3126 SoC support within the rk3128 driver
   - Amlogic gxbb CEC32 and sd_emmc clks
   - Amlogic meson8b reset controller support
   - IDT VersaClock 5P49V5925/5P49V6901 support
   - Qualcomm MSM8996 SMMU clks
   - Various 'const' applications for struct clk_ops
   - si5351 PLL reset bugfix
   - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
   - Assorted Tegra clk driver fixes"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits)
  clk: si5351: fix PLL reset
  ASoC: atmel-classd: remove aclk clock
  ASoC: atmel-classd: remove aclk clock from DT binding
  clk: at91: clk-generated: make gclk determine audio_pll rate
  clk: at91: clk-generated: create function to find best_diff
  clk: at91: add audio pll clock drivers
  dt-bindings: clk: at91: add audio plls to the compatible list
  clk: at91: clk-generated: remove useless divisor loop
  clk: mb86s7x: Drop non-building driver
  clk: ti: check for null return in strrchr to avoid null dereferencing
  clk: Don't write error code into divider register
  clk: uniphier: add video input subsystem clock
  clk: uniphier: add audio system clock
  clk: stm32h7: Add stm32h743 clock driver
  clk: gate: expose clk_gate_ops::is_enabled
  clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled()
  clk: uniphier: add PXs3 clock data
  clk: hi6220: change watchdog clock source
  clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
  clk: cs2000: Add cs2000_set_saved_rate
  ...
2017-09-13 11:04:14 -07:00
Quentin Schulz 0865805d82 clk: at91: add audio pll clock drivers
This new clock driver set allows to have a fractional divided clock that
would generate a precise clock particularly suitable for audio
applications.

The main audio pll clock has two children clocks: one that is connected
to the PMC, the other that can directly drive a pad. As these two routes
have different enable bits and different dividers and divider formulas,
they are handled by two different drivers. Each of them could modify the
rate of the main audio pll parent.

The main audio pll clock can output 620MHz to 700MHz.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-09-01 15:46:52 -07:00
Arnd Bergmann dbeb0c8e84 ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platforms
My previous patch fixed a link error for all at91 platforms when
CONFIG_ARM_CPU_SUSPEND was not set, however this caused another
problem on a configuration that enabled CONFIG_ARCH_AT91 but none
of the individual SoCs, and that also enabled CPU_ARM720 as
the only CPU:

warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE)
arch/arm/kernel/sleep.o: In function `cpu_resume':
(.text+0xf0): undefined reference to `cpu_arm720_suspend_size'
arch/arm/kernel/suspend.o: In function `__cpu_suspend_save':
suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend'

This improves the hack some more by only selecting ARM_CPU_SUSPEND
for the part that requires it, and changing pm.c to drop the
contents of unused init functions so we no longer refer to
cpu_resume on at91 platforms that don't need it.

Fixes: cc7a938f5f ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-23 17:31:39 +02:00
Olof Johansson 17bc093e18 Fixes for 4.12:
Fix two compilation issues
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlkr5k8ACgkQAyWl4gNJ
 NJLWOxAAiuIGE68UnDq/C77RB8ETHvXJoJgdmj6RTTP1RCwioMBicWWuBFR20a10
 1RNQ4hVqWQbQlW0KNWZrdO50eWJKS4o47GKQ2qkkK9oYn8JSFaptGi6rqU+mVCVv
 GrBKZQczIBMa2JPgSYXyJu/NWtAPWr807LRujGEbDRmAMpid9mDnCG07cL83WYY5
 8pi8lT/vKSWK/wl/LjF6wdTmKoF1vFd4TKk7xGYvvJiUT1kgt6jEWXa52IUGCJJn
 UtJD97vJwBkR1vxx0ocRiHnuN8OD2OjewJ61S1kGRvBIQZazHcBneSl70dPp11IJ
 Hc1WKLiNI04/seHCVFvS74TxZLujR19f7sKXO3yp+9aXv+DJyTDJcfKT2LY3uACr
 Uf+kmyIgOmoMQCIO8xhj6AM9nJs6MpRZuy4oKjGnsr3iOs3cZmmV5lhercd6ZlH3
 oXSPXPeNJox9buig+Pxno8ugcfaJChEH5DxAyfUpnC4mLvjcWGXIVLB8jtbj0H7C
 9JjNbyjYem0wFc45ySjCePs+nrnIYLhaKbm1V6T0IUzeJB46bMfiNLo7dg50d6AD
 tZzEn7Br0zHVXs0TpfmUqdpyFEv6N+jJlz4UNQiN74lHVLBpcmf7LoeavreGIg+i
 YbXLPtHwAtE1eYLQGo3lUiNnaJIKA8V8ErMpuL7vexgSX3/STgk=
 =P9hB
 -----END PGP SIGNATURE-----

Merge tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc

Bring in the fixes branch to avoid a merge conflict between new SoC options and
the build fix adding CONFIG_AMR_CPU_SUSPEND.

Fixes for 4.12:

Fix two compilation issues

* tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91: select CONFIG_ARM_CPU_SUSPEND
  memory: atmel-ebi: mark PM ops as __maybe_unused

Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18 23:12:36 -07:00
Olof Johansson 5a55029f46 SoC for 4.13:
- New suspend/resume mode for sama5d2
  - Initial support for armv7m based SoCs
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAllEBAgACgkQAyWl4gNJ
 NJI+xA//S3Wkndjt/XXl1LMbl0iakv4qkLNBg7VPAO9NHZp5sLPf4MFbqvJMSiv4
 mq+nCVKyQetj6tQnVTyp/vXu4alK8GmYqgKbnr4taoapM/9/6whiDwEMU+/F6BVy
 q9iGAsqDpgjnTsc7VZoUt0+N45dCiAP68zgSVSxdttEDDKIFOvEq0TK9oRW2YZZa
 pd39C9Jly+0JSik4t9Fuk7/E40sOLQ4QAQT6z82B8XfIdN1s9hdflgAn1JMvDGRh
 BgEg4wKGf7LZEP2fhJhX+dhXnhImnebOXXGCXOUdSGKBkLplHe30w9SJ8TodL/7L
 2QC18NObx40R04GpV5a55Ln/gAWfOJpcXYAMNrJ+J080Vc7YRHvVY6LJsKxP5+yV
 +FmC5+jB1w5ndfPr2Rz+26S9C0PvfrCYTk2liXohvfKdj1kRjPMds7nYtW0ADAPX
 E4Ba8TG90h68sC5ojyC4gsnWYnLWPf8rBfYfaPpxWniaIuCzncOPAkRFvJjrDorD
 u5shFW1EFiIjNPmQOenXJ4sIh2DO75T7aRSztsmrVsxiHzQ8wMW/dVCiHYfOgn/m
 yccN91ljv4/69nwsxoqEULdWkXV9vrdzc3iLKE0lZGpFForiW/gtmd2EXq/WqbJ9
 SGQMEURwvVyiAOmlAtJuCSkPIrs1yOPtSCb465oUverkOpaBp/8=
 =JHP9
 -----END PGP SIGNATURE-----

Merge tag 'at91-ab-4.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc

SoC for 4.13:

 - New suspend/resume mode for sama5d2
 - Initial support for armv7m based SoCs

* tag 'at91-ab-4.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91: remove atmel_nand_data
  ARM: at91: fix at91_suspend_entering_slow_clock link error
  ARM: at91: debug: add samv7x support
  ARM: at91: add armv7m SoC detection
  ARM: at91: handle CONFIG_PM for armv7m configurations
  ARM: at91: Add armv7m support
  ARM: at91: Document armv7m compatibles
  ARM: at91: Documentation: add armv7m families
  ARM: at91: pm: fallback to slowclock when backup mode fails
  ARM: at91: pm: allow selecting standby and suspend modes
  ARM: at91: pm: Add sama5d2 backup mode

Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18 22:53:20 -07:00
Arnd Bergmann be36e000bc ARM: at91: fix at91_suspend_entering_slow_clock link error
When CONFIG_ARCH_AT91 is enabled, but none of the specific SoC support
is in use, some at91 specific drivers fail to link:

drivers/tty/serial/atmel_serial.o: In function `atmel_serial_suspend':
atmel_serial.c:(.text.atmel_serial_suspend+0x1e): undefined reference to `at91_suspend_entering_slow_clock'
drivers/usb/host/ohci-at91.o: In function `ohci_hcd_at91_drv_suspend':
ohci-at91.c:(.text.ohci_hcd_at91_drv_suspend+0x12): undefined reference to `at91_suspend_entering_slow_clock'
drivers/usb/gadget/udc/at91_udc.o: In function `at91udc_suspend':
at91_udc.c:(.text.at91udc_suspend+0x26): undefined reference to `at91_suspend_entering_slow_clock'

This changes the at91_suspend_entering_slow_clock hack once more, adding
an alternative inline implementation that is used exactly in those cases
that don't provide the normal implementation.

Fixes: c1892c2379d2 ("ARM: at91: handle CONFIG_PM for armv7m configurations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-13 11:51:11 +02:00
Alexandre Belloni b2f0627433 ARM: at91: handle CONFIG_PM for armv7m configurations
There is currently no PM support for samx7 but the symbol can still be
selected. This avoids compilation issues.

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-02 10:11:44 +02:00
Szemző András 2d4c44e979 ARM: at91: Add armv7m support
Add Atmel SAME70/SAMS70/SAMV71 SoC support.

Signed-off-by: Szemző András <sza@esh.hu>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-02 10:11:38 +02:00
Arnd Bergmann cc7a938f5f ARM: at91: select CONFIG_ARM_CPU_SUSPEND
The reference to cpu_resume requires the corresponding
generic code to be enabled when CONFIG_PM is set:

arch/arm/mach-at91/pm.o: In function `sama5d2_pm_init':
pm.c:(.init.text+0x5e8): undefined reference to `cpu_resume'

Fixes: 24a0f5c539 ("ARM: at91: pm: Add sama5d2 backup mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-29 11:06:56 +02:00
Arnd Bergmann 0527873b29 ARM: remove duplicate 'const' annotations'
gcc-7 warns about some declarations that are more 'const' than necessary:

arch/arm/mach-at91/pm.c:338:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct of_device_id const ramc_ids[] __initconst = {
arch/arm/mach-bcm/bcm_kona_smc.c:36:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct of_device_id const bcm_kona_smc_ids[] __initconst = {
arch/arm/mach-spear/time.c:207:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct of_device_id const timer_of_match[] __initconst = {
arch/arm/mach-omap2/prm_common.c:714:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = {
arch/arm/mach-omap2/vc.c:562:35: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier]
 static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = {

The ones in arch/arm were apparently all introduced accidentally by one
commit that correctly marked a lot of variables as __initconst.

Fixes: 19c233b79d ("ARM: appropriate __init annotation for const data")
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-19 10:12:55 +02:00
Alexandre Belloni 287322386d ARM: at91: pm: fallback to slowclock when backup mode fails
If the backup sram allocation fails, ensure we can suspend by falling back
to the usual slow clock mode.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-05-15 11:55:33 +02:00
Alexandre Belloni 7693e18e8c ARM: at91: pm: allow selecting standby and suspend modes
While we can only select between "standby" and "mem" states for power
management, the atmel platforms can actually support more modes.

For both standby and mem, allow selecting which mode will be used using the
atmel.pm_modes kernel parameter.
By default, keep the current modes.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-05-15 11:55:24 +02:00
Alexandre Belloni 24a0f5c539 ARM: at91: pm: Add sama5d2 backup mode
The sama5d2 has a mode were it is possible to cut power to the SoC while
keeping the RAM in self refresh.
Resuming from that mode needs support in the firmware/bootloader.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-05-15 11:55:17 +02:00
Alexandre Belloni b32de9dd38 ARM: at91: move SoC detection to its own driver
To simplify machine init and as the soc_device struct is not used as the
parent for on-chip devices anymore, move SoC detection to its own driver.

Change in dmesg:
 - before:
DMA: preallocated 256 KiB pool for atomic coherent allocations
AT91: Detected SoC family: sama5d2
AT91: Detected SoC: sama5d27, revision 0
No ATAGs?
clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns
at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xe085b000
SCSI subsystem initialized

 - after:
DMA: preallocated 256 KiB pool for atomic coherent allocations
No ATAGs?
clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns
at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xe0859000
AT91: Detected SoC family: sama5d2
AT91: Detected SoC: sama5d27, revision 0
SCSI subsystem initialized

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:10 +02:00
Alexandre Belloni 8c9290aee1 ARM: at91: pm: correct typo
Add a missing bracket at the end of Anti's email

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:10 +02:00
Alexandre Belloni e56d75a9cf ARM: at91: pm: Remove at91_pm_set_standby
Merge at91_pm_set_standby() in at91_dt_ramc as this is the only callsite.
That moves it to the init section.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:09 +02:00
Alexandre Belloni 1346919285 ARM: at91: pm: Merge all at91sam9*_pm_init
The PM initialization is now identical for all at91sam9. Merge the
functions.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:09 +02:00
Alexandre Belloni 13f16017d3 ARM: at91: pm: Tie the USB clock mask to the pmc
The USB clocks mask (uhp_udp_mask) depends on the pmc. Tie it to the pmc id
instead of the SoC.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:08 +02:00
Alexandre Belloni aab02d611f ARM: at91: pm: Tie the memory controller type to the ramc id
Instead of relying on the SoC type to select the memory controller type,
use the device tree ids as they are parsed anyway.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:08 +02:00
Alexandre Belloni 56387634b7 ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
As already explained for pm_suspend.S, the DDRSDR controller fails to put
LPDDR1 memories in self-refresh. Force the controller to think it has DDR2
memories during the self-refresh period, as the DDR2 self-refresh spec is
equivalent to LPDDR1, and is correctly implemented in the controller.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:07 +02:00
Alexandre Belloni 5a2d4f053f ARM: at91: pm: Simplify at91rm9200_standby
Since 2008, AT91_MC_SDRAMC_LPR is set to 0 at kernel initialization. There
is no use saving, changing and restoring it.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:06 +02:00
Alexandre Belloni 65cc1a59d1 ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S
The number of register we can safely pass to at91_pm_suspend_in_sram is
limited. Instead, pass the address to the at91_pm_data structure.

The offsets are automatically generated to avoid hardcoding them.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:05 +02:00
Alexandre Belloni 9e07c3ce2c ARM: at91: pm: Move global variables into at91_pm_data
Instead of having separate global variables to hold IP addresses, move them
to struct at91_pm_data.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:05 +02:00
Alexandre Belloni 4d767bc3c3 ARM: at91: pm: Move at91_ramc_read/write to pm.c
Those macros are only used in pm.c, move them there so we can remove the
test on __ASSEMBLY__.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:04 +02:00
Alexandre Belloni 9824c447aa ARM: at91: pm: Cleanup headers
Remove unnecessary header inclusions and reorder the remaining ones.

Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-31 20:36:04 +02:00
Nicolas Ferre 60b89f1928 ARM: at91: pm: cpu_idle: switch DDR to power-down mode
On some DDR controllers, compatible with the sama5d3 one,
the sequence to enter/exit/re-enter the self-refresh mode adds
more constrains than what is currently written in the at91_idle
driver. An actual access to the DDR chip is needed between exit
and re-enter of this mode which is somehow difficult to implement.
This sequence can completely hang the SoC. It is particularly
experienced on parts which embed a L2 cache if the code run
between IDLE calls fits in it...

Moreover, as the intention is to enter and exit pretty rapidly
from IDLE, the power-down mode is a good candidate.

So now we use power-down instead of self-refresh. As we can
simplify the code for sama5d3 compatible DDR controllers,
we instantiate a new sama5d3_ddr_standby() function.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v4.1+
Fixes: 017b5522d5 ("ARM: at91: Add new binding for sama5d3-ddramc")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-14 11:09:50 +01:00
Alexandre Belloni 6cc7fbdf8d ARM: at91: pm: remove useless extern definition
at91_ramc_base is local to pm.c, remove its definition in pm.h

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-11 13:21:24 +01:00
Kishon Vijay Abraham I 6016b23bd5 ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
*MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM.
Don't select it redundantly in all ARCH_MULTIPLATFORM based machines.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-09-21 22:45:05 +02:00
Linus Torvalds fbae5cbb43 ARM: SoC platform updates for v4.8
Improved and new platform support for various SoCs:
 
  - New SoC support:
    - Broadcom BCM23550
    - Freescale i.MX7Solo
    - Qualcomm MDM9615
    - Renesas r8a7792
  - Conversion of clps711x to multiplatform
  - debug uart improvements for Atmel platforms
  - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram
  - OMAP tweaks and improvements to hwmod
  - OMAP support for kexec on SMP
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnaibAAoJEIwa5zzehBx3h6AP/0TBATiDuYXTcX3V8zZ/ia9y
 7dWbP7gVX7DN39b5qdjLTa+DUx3Y3msxW9qsuUQR8RWijbqjCH7b/fyPwGA0fmpP
 3uZpFpyzs+6/3TiMDN1yw1T+/2YbVyM+4rOeNsCwncdXjGSx0FaMJAqLBrppiWLH
 1S9HhD/314znibl8skOy8QIDWwlW011sS2mNUIN+JelvnS/VDjtCDfpphpNrAQF9
 MZB6LhT9itvf6mIEGIsaDq/Ii7fgIAnA9WCtwv9tJkAZHzbS0cWkiJzb7hF1GzFO
 Q5HBAyzn+CkeTQ3+9NQU0G0vhfa3Ea0g1gfw6qRmAw+z8Qdiamjh8SSve6zm1fE8
 GmIewsMAWWIUYykEIi9hbWCTYq06Pw/Nn6KWRAuQ/lpt++jzMQ82qk6cxELLW15e
 uAC1JjFOCIFNBZhkrdQDU0qx6Ew/AUH4wCYqu4Xh7pW0MHu0V9NgsmooeoTmCkpd
 WtgKp8Wh5dsK3SdsbTjdR/IeHSQkeSdgNY/6TBTjpRwCIlEMwHlKbvwvRExk1xzi
 nLQJsR49MsjeSdPflzO6WUzOjJhQfuw2jCtAQjlom15EgkEZ569MT4RsAQIgvNCI
 PeUWkvIW1uCtW7Y6ADPRBKMIrajPs8YW4E/xTItuhrqLHp8z6efvRmVNdpzqBTVj
 tT2t2bRXF0cGiUvOeU7U
 =Kh9P
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Improved and new platform support for various SoCs:

  New SoC support:
   - Broadcom BCM23550
   - Freescale i.MX7Solo
   - Qualcomm MDM9615
   - Renesas r8a7792

  Improvements:
   - convert clps711x to multiplatform
   - debug uart improvements for Atmel platforms
   - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram
   - OMAP tweaks and improvements to hwmod
   - OMAP support for kexec on SMP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
  ARM: davinci: fix build break because of undeclared dm365_evm_snd_data
  ARM: s3c64xx: smartq: Avoid sparse warnings
  ARM: sti: Implement dummy L2 cache's write_sec
  ARM: STi: Update machine _namestr to be more generic.
  arm: meson: explicitly select clk drivers
  ARM: tango: add Suspend-to-RAM support
  ARM: hisi: consolidate the hisilicon machine entries
  ARM: tango: fix CONFIG_HOTPLUG_CPU=n build
  MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry
  MAINTAINERS: Update BCM63XX entry
  MAINTAINERS: Add NS2 entry
  MAINTAINERS: Fix nsp false-positives
  MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries
  ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs
  ARM: clps711x: Switch to MULTIPLATFORM
  ARM: clps711x: Remove boards support
  ARM: clps711x: Add basic DT support
  ARM: clps711x: Reduce static map size
  ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu
  ARM: oxnas: Change OX810SE default driver config
  ...
2016-08-01 18:27:08 -04:00
Linus Torvalds 6f888fe31d ARM: SoC cleanups for v4.8
The cleanup branch keeps going down in size as we've completed a lot of
 the major legacy platform removals and conversions.
 
 A handful of changes this time around, some of the themes or larger sets are:
 
  - A bunch of i.MX cleanups around platform detection, init call cleanups
  - Misc fixes of missing/implicit includes
  - Removal of ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnnwFAAoJEIwa5zzehBx3zXQP/2a/+XkiseeGkEoiX/6FOfhH
 XTzipye0OYdEe3kVWFL1sVVXRH6a5sbDJRNtfsQc+KdSG5i7LMHWARRJmIx9CTMB
 oQ9pEbYKSyBQDHBSOZYT6W+qYOI2SdTYqesjd3yn+FY4SIFBpQ/V3axHnMICIRm9
 PmHF1QUQEdtQ2Y9+E1vA1mHcPN9enjlesD3VdRbxVPX/PZw63kx9y8ICVq5I/PX9
 DfJRcA+PKIYQghhEZ0cx2bEoKozv7W088C7DD1Umw1NN18pMuvvNQGhid80xUqKY
 4bmLSGWqwmSzv1WZ/u1pUnBGGQE9YY1U2b8kZy8hSVg9rupxS8Ang0ztZRRE6nk2
 4t8GmWuLDH+7PxFv/skzi1AMAx+4KxSfp3N5qyKr8ddmnYrFWmBPj2AeBqrlziw6
 8Z41LQULmf/Gs6McikGUP7ryqd15gNtTJO1wlavqFrPe0fyzcHsgqpIy3YCqZiSE
 wQ4Hc036xqGknmg6GjHWp+W1rHZVGsnXmvnp1IVRoAGqwBqxNi4ItIXE7an8144H
 NnWFmPRSsGg26MfEJVsbtPQWNtEGqM2lgr6zn9xirC0cVbQ4ZDtWp2q0bJ1v/cLQ
 sW6Gu6jgVN8YUPp56lBaXJ5RxHE9V1Sqi4/+KghBKWW0X/BIo99b6PVr2bJRrkaq
 ZvpvsgzbCHdGqTptF9Dw
 =SfR/
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "The cleanup branch keeps going down in size as we've completed a lot
  of the major legacy platform removals and conversions.

  A handful of changes this time around, some of the themes or larger
  sets are:

   - A bunch of i.MX cleanups around platform detection, init call cleanups
   - Misc fixes of missing/implicit includes
   - Removal of ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
  ARM: mps2: fix typo
  ARM: s3c64xx: avoid warning about 'struct device_node'
  bus: mvebu-mbus: make mvebu_mbus_syscore_ops static
  bus: mvebu-mbus: fix __iomem on register pointers
  ARM: tegra: Remove board_init_funcs array
  ARM: iop: Fix indentation
  ARM: imx: remove cpu_is_mx*()
  ARM: imx: remove last call to cpu_is_mx5*
  ARM: imx: rework mx27_pm_init() call
  ARM: imx: deconstruct mx3_idle
  ARM: imx: deconstruct mxc_rnga initialization
  ARM: imx: remove cpu_is_mx1 check
  ARM: i.MX: Do not explicitly call l2x0_of_init()
  ARM: i.MX: system.c: Tweak prefetch settings for performance
  ARM: i.MX: system.c: Replace magic numbers
  ARM: i.MX: system.c: Remove redundant errata 752271 code
  ARM: i.MX: system.c: Convert goto to if statement
  ARM: Kirkwood: fix kirkwood_pm_init() declaration/type
  ARM: Kirkwood: make kirkwood_disable_mbus_error_propagation() static
  ARM: orion5x: make orion5x_legacy_handle_irq static
  ...
2016-08-01 18:21:13 -04:00
Arnd Bergmann 7c2d780ec0 Merge ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB changes into next/soc
* commit '5c34a4e89c743339f78cafb2f2a826a010f0746a':
  ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
  ARM: uniphier: drop code for old DT binding

These cause a harmless conflict with the clps711x multiplatform
support, and it's easy to resolve.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-07-06 18:00:32 +02:00
Kefeng Wang 435ebcbc9f arm: use of_platform_default_populate() to populate
Use helper of_platform_default_populate() in linux/of_platform
when possible, instead of calling of_platform_populate() with
the default match table.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Viresh Kumar <vireshk@kernel.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2016-06-23 15:00:39 -05:00
Ben Dooks ab6778eee5 ARM: at91: fix warnings in pm.c
Fix a pair of missing statics on un-exported functions and
include <linux/platform_data/atmel.h> to provide the declaration
of at91_suspend_entering_slow_clock() to fix the following
sparse warnings:

arch/arm/mach-at91/pm.c:127:5: warning: symbol 'at91_suspend_entering_slow_clock' was not declared. Should it be static?
arch/arm/mach-at91/pm.c:358:6: warning: symbol 'at91rm9200_idle' was not declared. Should it be static?
arch/arm/mach-at91/pm.c:367:6: warning: symbol 'at91sam9_idle' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-21 17:32:31 +02:00
Linus Walleij 5c34a4e89c ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
This replaces:

- "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can
  now be selected directly.

- "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB
  is now selectable by everyone, so we need not declare our
  intent to select it.

When ordering the symbols the following rationale was used:
if the selects were in alphabetical order, I moved select GPIOLIB
to be in alphabetical order, but if the selects were not
maintained in alphabetical order, I just replaced
"select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB".

Cc: Michael Büsch <m@bues.ch>
Cc: arm@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-03 12:18:13 -07:00