Commit Graph

135 Commits

Author SHA1 Message Date
Linus Torvalds 6693e74a16 PCI: be more verbose about resource quirks
When reserving an PCI quirk, note that in the kernel bootup messages.

Also, parse the strange PIIX4 device resources - they should get their
own PCI resource quirks, but for now just print out what it finds to
verify that the code does the right thing.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-25 20:40:09 -07:00
Linus Torvalds 4196c3af25 cardbus: limit IO windows to 256 bytes
That's what we've always historically done, and bigger windows seem to
confuse some cardbus bridges. Or something.

Alan reports that this makes the ThinkPad 600x series work properly
again: the 4kB IO window for some reason made IDE DMA not work, which
makes IDE painfully slow even if it works after DMA timeouts.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-23 16:31:16 -07:00
Linus Torvalds 1e65174a33 Add some basic .gitignore files
This still leaves driver and architecture-specific subdirectories alone,
but gets rid of the bulk of the "generic" generated files that we should
ignore.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-18 08:26:15 -07:00
Jeff Garzik cc675230a9 [PATCH] Fix and clean up quirk_intel_ide_combined() configuration
This change makes quirk_intel_ide_combined() dependent on the precise
conditions under which it is needed:

* IDE is built in
* IDE SATA option is not set
* ata_piix or ahci drivers are enabled

This fixes an issue where some modular configurations would not cause
the quirk to be enabled.

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus torvalds <torvalds@osdl.org>
2005-10-17 15:01:53 -07:00
Ivan Kokshaysky 12f44f46bc [PATCH] pci: fixup parent subordinate busnr
I believe the change that broke things is introduction of
pci_fixup_parent_subordinate_busnr().

The patch here does two things:
- hunk #1 should fix the problems you've seen when you boot without
  additional "pci" kernel options;
- hunk #2 supposedly fixes boot with "pci=assign-busses" option which
  otherwise hangs Acer TM81xx machines as reported.

Please try this with and without "pci=assign-busses". If it boots,
I'd like to see 'lspci -vvx' for both cases.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23 08:05:16 -07:00
Linda Xie 02fe75a9ad [PATCH] PCI Hotplug: Fix buffer overrun in rpadlpar_sysfs.c
Signed-off-by: Linda Xie <lxie@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:25 -07:00
Amos Waterland 3c6de9295d [PATCH] fix drivers/pci/probe.c warning
This function expects an unsigned 32-bit type as its third argument:

 static u32 pci_size(u32 base, u32 maxbase, u32 mask)

However, given these definitions:

 #define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
 #define PCI_ROM_ADDRESS_MASK (~0x7ffUL)

these two calls in drivers/pci/probe.c are problematic for architectures
for which a UL is not equivalent to a u32:

 sz = pci_size(l, sz, PCI_BASE_ADDRESS_MEM_MASK);
 sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK);

Hence the below compile warning when building for ARCH=ppc64:

 drivers/pci/probe.c: In function `pci_read_bases':
 /.../probe.c:168: warning: large integer implicitly truncated to unsigned type
 /.../probe.c:218: warning: large integer implicitly truncated to unsigned type

Here is a simple fix.

Signed-off-by: Amos Waterland <apw@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:25 -07:00
Pekka Enberg 656da9da37 [PATCH] PCI: convert kcalloc to kzalloc
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Bjorn Helgaas 1029d6b58a [PATCH] PCI: remove unused "scratch"
Unused variable.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
Adam Kropelin 06c6d271f4 [PATCH] shpchp: Use dword accessors for PCI_ROM_ADDRESS
PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using
pci_bus_{read,write}_config_dword().  A recent audit of drivers/ turned up
several cases of byte- and word-sized accesses.  The harmful ones were fixed
by Linus directly.  This patches up one of the remaining
harmless-but-still-wrong cases caught in the dragnet.

Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Cc: <kristen.c.accardi@intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:03 -07:00
Adam Kropelin c2fa4f4ad8 [PATCH] pciehp: Use dword accessors for PCI_ROM_ADDRESS
PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed
using pci_bus_{read,write}_config_dword(). A recent audit of drivers/
turned up several cases of byte- and word-sized accesses. The harmful
ones were fixed by Linus directly. This patches up one of the remaining
harmless-but-still-wrong cases caught in the dragnet.

Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Cc: <kristen.c.accardi@intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:03 -07:00
Adam Kropelin d648daca11 [PATCH] ibmphp: Use dword accessors for PCI_ROM_ADDRESS
PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using
pci_bus_{read,write}_config_dword().  A recent audit of drivers/ turned up
several cases of byte- and word-sized accesses.  The harmful ones were fixed
by Linus directly.  This patches up one of the remaining
harmless-but-still-wrong cases caught in the dragnet.

Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:03 -07:00
John W. Linville 32a3658533 [PATCH] pci: only call pci_restore_bars at boot
Certain (SGI?) ia64 boxes object to having their PCI BARs
restored unless absolutely necessary. This patch restricts calling
pci_restore_bars from pci_set_power_state unless the current state
is PCI_UNKNOWN, the actual (i.e. physical) state of the device is
PCI_D3hot, and the device indicates that it will lose its configuration
when transitioning to PCI_D0.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-14 09:37:17 -07:00
Alan Cox 4327edf6b8 [PATCH] Subject: PATCH: fix numa caused compile warnings
pcibus_to_cpumask expands into more than just an initialiser so gcc
moans about code before variable declarations.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:21 -07:00
Linus Torvalds 41d0ab2a7d Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 2005-09-09 15:17:00 -07:00
Paul Mackerras cdb9b9f730 [PATCH] PCI: Small rearrangement of PCI probing code
This patch makes some small rearrangements of the PCI probing code in
order to make it possible for arch code to set up the PCI tree
without needing to duplicate code from the PCI layer unnecessarily.
PPC64 will use this to set up the PCI tree from the Open Firmware
device tree, which we need to do on logically-partitioned pSeries
systems.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-09 13:58:45 -07:00
Rumen Ivanov Zarev c87f883edb [PATCH] PCI: Unhide SMBus on Compaq Evo N620c
Trivial patch against 2.6.13 to unhide SMBus on Compaq Evo N620c laptop using
Intel 82855PM chipset.

Signed-off-by: Rumen Zarev <rzarev@caltech.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-09 13:58:41 -07:00
Rajesh Shah 7c56075e60 [PATCH] PCI: Fix PCI bus mastering enable problem in pciehp
Martin Franc reported that the pciehp driver was not enabling bus
master capability on his hot-plugged card. pciehprm_enable_card()
was updating the PCI command register only if _HPP indicated a
value for SERR or PERR that was different from the current setting.
I don't have hardware that reproduces this problem, but Martin
reports that this patch fixes the problem for him.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
From rzarev@its.caltech.edu Tue Sep  6 18:29:50 2005
Date: Tue, 6 Sep 2005 13:39:32 -0700 (PDT)
From: Rumen Ivanov Zarev <rzarev@its.caltech.edu>
Message-Id: <200509062039.j86KdWMr014934@inky.its.caltech.edu>
To: gregkh@suse.de
Subject: PCI: Unhide SMBus on Compaq Evo N620c
Cc: linux-kernel@vger.kernel.org

Trivial patch against 2.6.13 to unhide SMBus on Compaq Evo N620c laptop using
Intel 82855PM chipset.

Signed-off-by: Rumen Zarev <rzarev@caltech.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/pci/quirks.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- gregkh-2.6.orig/drivers/pci/quirks.c	2005-09-09 10:28:55.000000000 -0700
+++ gregkh-2.6/drivers/pci/quirks.c	2005-09-09 13:51:44.000000000 -0700
@@ -876,6 +876,12 @@ static void __init asus_hides_smbus_host
                        case 0xC00C: /* Samsung P35 notebook */
                                asus_hides_smbus = 1;
                        }
+	} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) {
+		if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+			switch(dev->subsystem_device) {
+			case 0x0058: /* Compaq Evo N620c */
+				asus_hides_smbus = 1;
+			}
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82845_HB,	asus_hides_smbus_hostbridge );
2005-09-09 13:58:18 -07:00
Dominik Brodowski b3743fa444 [PATCH] yenta: share code with PCI core
Share code between setup-bus.c and yenta_socket.c: use the write-out code of
resources to the bridge also in yenta_socket.c, as it provides useful debug
output.  In addition, it fixes the bug that the CPU-centric resource view
might need to be transferred to the PCI-centric view: setup-bus.c does that,
while yenta-socket.c did not.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:57:47 -07:00
Greg Kroah-Hartman 7bcf5c0e7f [PATCH] PCI: move pci core to use add_hotplug_env_var()
This fixes a bug in the environment variables for all PCI device hotplug calls.

Thanks to Kay Sievers for pointing out the problem.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-09 11:24:19 -07:00
Linus Torvalds 3aed77bc84 Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6 2005-09-09 10:38:02 -07:00
Brett M Russ 2fd9d74b35 [PATCH] PCI: PCI/libata INTx bug fix
Previous INTx cleanup patch had a bug that was not caught.  I found
this last night during testing and can confirm that it is now 100%
working.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 10:27:23 -07:00
Paul Mackerras 1635317fac [PATCH] Separate pci bits out of struct device_node
This patch pulls the PCI-related junk out of struct device_node and
puts it in a separate structure, struct pci_dn.  The device_node now
just has a void * pointer in it, which points to a struct pci_dn for
nodes that represent PCI devices.  It could potentially be used in
future for device-specific data for other sorts of devices, such as
virtual I/O devices.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09 22:11:38 +10:00
Brett M Russ a04ce0ffca [PATCH] PCI/libata INTx cleanup
Simple cleanup to eliminate X copies of the pci_enable_intx() function
in libata.  Moved ahci.c's pci_intx() to pci.c and use it throughout
libata and msi.c.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 15:07:08 -07:00
Daniel Ritz 3fe9d19f9e [PATCH] PCI: Support PCM PM CAP version 3
- support PCI PM CAP version 3 (as defined in PCI PM Interface Spec v1.2)

- pci/probe.c sets the PM state initially to 4 which is D3cold.  add a
  PCI_UNKNOWN

- minor cleanups

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 15:04:30 -07:00
Paul Mackerras cecf4864cf [PATCH] PCI: Add pci_walk_bus function to PCI core (nonrecursive)
The PCI error recovery infrastructure needs to be able to contact all
the drivers affected by a PCI error event, which may mean traversing
all the devices under a given PCI-PCI bridge.  This patch adds a
function to the PCI core that traverses all the PCI devices on a PCI
bus and under any PCI-PCI bridges on that bus (and so on), calling a
given function for each device.  This provides a way for the error
recovery code to iterate through all devices that are affected by an
error event.

This version is not implemented as a recursive function.  Instead,
when we reach a PCI-PCI bridge, we set the pointers to start doing the
devices on the bus under the bridge, and when we reach the end of a
bus's devices, we use the bus->self pointer to go back up to the next
higher bus and continue doing its devices.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 15:04:30 -07:00
Prarit Bhargava 1d2450a4a6 [PATCH] PCI Hotplug: SGI hotplug driver fixes
These fixes were suggested by pcihpd-discuss, but were dropped in the
initial checkin of the code.  These fixes include cleaning up the
hotplug driver sysfs filename, and some minor code cleanups.  The driver
also requires at least PROM 4.30, not 4.20.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:25 -07:00
Alan Stern 11f3859b1e [PATCH] PCI: Fix regression in pci_enable_device_bars
This patch (as552) fixes yet another small problem recently added.  If an
attempt to put a PCI device back into D0 fails because the device doesn't
support PCI PM, it shouldn't count as error.  Without this patch the UHCI
controllers on my Intel motherboard don't work.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:25 -07:00
Greg Kroah-Hartman 95a629657d [PATCH] PCI: start paying attention to a lot of pci function return values
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:25 -07:00
David S. Miller 085ae41f66 [PATCH] Make sparc64 use setup-res.c
There were three changes necessary in order to allow
sparc64 to use setup-res.c:

1) Sparc64 roots the PCI I/O and MEM address space using
   parent resources contained in the PCI controller structure.
   I'm actually surprised no other platforms do this, especially
   ones like Alpha and PPC{,64}.  These resources get linked into the
   iomem/ioport tree when PCI controllers are probed.

   So the hierarchy looks like this:

   iomem --|
	   PCI controller 1 MEM space --|
				        device 1
					device 2
					etc.
	   PCI controller 2 MEM space --|
				        ...
   ioport --|
            PCI controller 1 IO space --|
					...
            PCI controller 2 IO space --|
					...

   You get the idea.  The drivers/pci/setup-res.c code allocates
   using plain iomem_space and ioport_space as the root, so that
   wouldn't work with the above setup.

   So I added a pcibios_select_root() that is used to handle this.
   It uses the PCI controller struct's io_space and mem_space on
   sparc64, and io{port,mem}_resource on every other platform to
   keep current behavior.

2) quirk_io_region() is buggy.  It takes in raw BUS view addresses
   and tries to use them as a PCI resource.

   pci_claim_resource() expects the resource to be fully formed when
   it gets called.  The sparc64 implementation would do the translation
   but that's absolutely wrong, because if the same resource gets
   released then re-claimed we'll adjust things twice.

   So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource()
   conversion before passing it on to pci_claim_resource().

3) I was mistakedly __init'ing the function methods the PCI controller
   drivers provide on sparc64 to implement some parts of these
   routines.  This was, of course, easy to fix.

So we end up with the following, and that nasty SPARC64 makefile
ifdef in drivers/pci/Makefile is finally zapped.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:25 -07:00
John W. Linville 064b53dbcc [PATCH] PCI: restore BAR values after D3hot->D0 for devices that need it
Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration
(including BARs) when transitioning from D3hot->D0.  This leaves such
a device in an inaccessible state.  The patch below causes the BARs
to be restored when enabling such a device, so that its driver will
be able to access it.

The patch also adds pci_restore_bars as a new global symbol, and adds a
correpsonding EXPORT_SYMBOL_GPL for that.

Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a
(re)boot.  Most drivers call pci_enable_device very early, so devices
left in D3hot that lose configuration during the D3hot->D0 transition
will be inaccessible to their drivers.

Drivers could be modified to account for this, but it would
be difficult to know which drivers need modification.  This is
especially true since often many devices are covered by the same
driver.  It likely would be necessary to replicate code across dozens
of drivers.

The patch below should trigger only when transitioning from D3hot->D0
(or at boot), and only for devices that have the "no soft reset" bit
cleared in the PM control register.  I believe it is safe to include
this patch as part of the PCI infrastructure.

The cleanest implementation of pci_restore_bars was to call
pci_update_resource.  Unfortunately, that does not currently exist
for the sparc64 architecture.  The patch below includes a null
implemenation of pci_update_resource for sparc64.

Some have expressed interest in making general use of the the
pci_restore_bars function, so that has been exported to GPL licensed
modules.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:24 -07:00
Kristen Accardi 1248d63612 [PATCH] PCI Hotplug: use bus_slot number for name
For systems with multiple hotplug controllers, you need to use more than
just the slot number to uniquely name the slot.  Without a unique slot
name, the pci_hp_register() will fail.  This patch adds the bus number
to the name.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:24 -07:00
Adrian Bunk 982245f017 [PATCH] PCI: remove CONFIG_PCI_NAMES
This patch removes CONFIG_PCI_NAMES.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
Andi Kleen d42c69972b [PATCH] PCI: Run PCI driver initialization on local node
Run PCI driver initialization on local node

Instead of adding messy kmalloc_node()s everywhere run the
PCI driver probe on the node local to the device.

This would not have helped for IDE, but should for
other more clean drivers that do more initialization in probe().
It won't help for drivers that do most of the work
on first open (like many network drivers)

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
John Rose 56d8456b06 [PATCH] PCI Hotplug: rpaphp: Purify hotplug
Currently rpaphp registers the following bus types as hotplug slots:
1) Actual PCI Hotplug slots
2) Embedded/Internal PCI slots
3) PCI Host Bridges

The second and third bus types are not actually direct parents of
removable adapters.  As such, the rpaphp has special case code to fake
results for attributes like power, adapter status, etc.  This patch
removes types 2 and 3 from the rpaphp module.

This patch also changes the DLPAR module so that slots can be
DLPAR-added/removed without having been designated as hotplug-capable.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
John Rose 940903c5a5 [PATCH] PCI Hotplug: rpaphp: Export slot enable
This patch exports rpaphp_config_pci_adapter() for use by the rpadlpar
module.  It also changes this function by removing any dependencies on
struct slot.  The patch also changes the RPA DLPAR-add path to enable
newly-added slots in a separate step from that which registers them as
hotplug slots.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
John Rose 0945cd5f90 [PATCH] PCI Hotplug: rpaphp: Remove rpaphp_find_pci
The rpaphp module currently uses a fragile method to find a pci device
by its device node.  This function is unnecessary, so this patch scraps
it.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:23 -07:00
John Rose 9c209c919d [PATCH] PCI Hotplug: rpaphp: Change slot pci reference
The slot structure in the rpaphp module currently references the PCI
contents of the slot using the PCI device of the parent bridge.  This
is unnecessary, since the module is actually interested in the
subordinate bus of the bridge.  The dependency on a PCI bridge device
also prohibits the module from registering hotplug slots that have a
root bridge as a parent, since root bridges on PPC64 don't have PCI
devices.

This patch changes struct slot to reference the PCI subsystem using a
pci_bus rather than a pci_dev.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:22 -07:00
John Rose 5eeb8c63a3 [PATCH] PCI Hotplug: rpaphp: Move VIO registration
Currently, rpaphp registers Virtual I/O slots as hotplug slots.  The
only purpose of this registration is to ensure that the VIO subsystem
is notified of new VIO buses during DLPAR adds.  Similarly, rpaphp
notifies the VIO subsystem when a VIO bus is DLPAR-removed.  The rpaphp
module has special case code to fake results for attributes like power,
adapter status, etc.

The VIO register/unregister functions could just as easily be made from
the DLPAR module.  This patch moves the VIO registration calls to the
DLPAR module, and removes the VIO fluff from rpaphp altogether.

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:22 -07:00
John Rose bde1684124 [PATCH] PCI Hotplug: rpaphp: Remove unused stuff
Subject line says it all :)

Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:22 -07:00
Len Brown 64e47488c9 Merge linux-2.6 with linux-acpi-2.6 2005-09-08 01:45:47 -04:00
Ashok Raj 54d5d42404 [PATCH] x86/x86_64: deferred handling of writes to /proc/irqxx/smp_affinity
When handling writes to /proc/irq, current code is re-programming rte
entries directly. This is not recommended and could potentially cause
chipset's to lockup, or cause missing interrupts.

CONFIG_IRQ_BALANCE does this correctly, where it re-programs only when the
interrupt is pending. The same needs to be done for /proc/irq handling as well.
Otherwise user space irq balancers are really not doing the right thing.

- Changed pending_irq_balance_cpumask to pending_irq_migrate_cpumask for
  lack of a generic name.
- added move_irq out of IRQ_BALANCE, and added this same to X86_64
- Added new proc handler for write, so we can do deferred write at irq
  handling time.
- Display of /proc/irq/XX/smp_affinity used to display CPU_MASKALL, instead
  it now shows only active cpu masks, or exactly what was set.
- Provided a common move_irq implementation, instead of duplicating
  when using generic irq framework.

Tested on i386/x86_64 and ia64 with CONFIG_PCI_MSI turned on and off.
Tested UP builds as well.

MSI testing: tbd: I have cards, need to look for a x-over cable, although I
did test an earlier version of this patch.  Will test in a couple days.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Acked-by: Zwane Mwaikambo <zwane@holomorphy.com>
Grudgingly-acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:15 -07:00
Pavel Machek ca078bae81 [PATCH] swsusp: switch pm_message_t to struct
This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Karsten Wiese a1740913ca [PATCH] via vt8237 apic bypass deassertion quirk
The VIA VT8237's IOAPIC sends 'APIC De-Assert Messages' by default, causing
another CPU interrupt when the IRQ pin is de-asserted.  This feature is
switched off by the patch to get rid of doubled ioapic level interrupt
rates.

Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:10 -07:00
Len Brown 129521dcc9 Merge linux-2.6 into linux-acpi-2.6 test 2005-09-03 02:44:09 -04:00
Benjamin Herrenschmidt 8085ce084c [PATCH] Fix PCI ROM mapping
This fixes a problem with pci_map_rom() which doesn't properly
update the ROM BAR value with the address thas allocated for it by the
PCI code. This problem, among other, breaks boot on Mac laptops.

It'ss a new version based on Linus latest one with better error
checking.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-01 10:50:29 -07:00
Ivan Kokshaysky 81d4af1340 [PATCH] x86: pci_assign_unassigned_resources() update
I had some time to think about PCI assign issues in 2.6.13-rc series.

The major problem here is that we call pci_assign_unassigned_resources()
way too early - at subsys_initcall level. Therefore we give no chances
to ACPI and PnP routines (called at fs_initcall level) to reserve their
respective resources properly, as the comments in drivers/pnp/system.c
and drivers/acpi/motherboard.c suggest:

 /**
  * Reserve motherboard resources after PCI claim BARs,
  * but before PCI assign resources for uninitialized PCI devices
  */

So I moved the pci_assign_unassigned_resources() call to
pcibios_assign_resources() (fs_initcall), which should hopefully fix a
lot of problems and make PCIBIOS_MIN_IO tweaks unnecessary.

Other changes:
- remove resource assignment code from pcibios_assign_resources(), since
  it duplicates pci_assign_unassigned_resources() functionality and
  actually does nothing in 2.6.13;
- modify ROM assignment code as per Ben's suggestion: try to use firmware
  settings by default (if PCI_ASSIGN_ROMS is not set);
- set CARDBUS_IO_SIZE back to 4K as it's a wonderful stress test for
  various setups.

Confirmed by Tero Roponen <teanropo@cc.jyu.fi> (who had problems with
the 4kB CardBus IO size previously).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-30 11:14:48 -07:00
Len Brown 60cfff3516 Auto-update from upstream 2005-08-26 22:11:28 -04:00
Linus Torvalds 755528c860 Ignore disabled ROM resources at setup
Writing even a disabled value seems to mess up some matrox graphics
cards.  It may be a card-related issue, but we may also be writing
reserved low bits in the result.

This was a fall-out of switching x86 over to the generic PCI resource
allocation code, and needs more debugging.  In particular, the old x86
code defaulted to not doing any resource allocations at all for ROM
resources.

In the meantime, this has been reported to make X happier by Helge
Hafting <helgehaf@aitel.hist.no>.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-26 10:49:22 -07:00
Linus Torvalds 26aad69e3d Only pre-allocate 256 bytes of cardbio IO range
It may seem small, but most cards need much less, if any, and this not
only makes the code adhere to the comment, it seems to fix a boot-time
lockup on a ThinkPad 380XD laptop reported by Tero Roponen <teanropo@cc.jyu.fi>

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-26 10:40:10 -07:00