Commit Graph

381 Commits

Author SHA1 Message Date
Ben Dooks dabaeff06c [ARM] 3364/1: [cleanup] warning fix - definitions for enable_hlt and disable_hlt
Patch from Ben Dooks

The enable_hlt and disable_hlt should be declared in
include/asm/setup.h. This fixes sparse errors from
arch/arm/kernel/process.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-15 23:17:26 +00:00
Russell King cdaabbd74b [ARM] iwmmxt thread state alignment
This patch removes the reliance of iwmmxt on hand coded alignments.
Since thread_info is always 8K aligned, specifying that fpstate is
8-byte aligned achieves the same effect without needing to resort
to hand coded alignments.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-12 22:36:06 +00:00
Catalin Marinas 6a0e243069 [ARM] 3352/1: DSB required for the completion of a TLB maintenance operation
Patch from Catalin Marinas

Chapter B2.7.3 in the latest ARM ARM (with v6 information) states that
the completion of a TLB maintenance operation is only guaranteed by
the execution of a DSB (Data Syncronization Barrier, formerly Data
Write Barrier or Drain Write Buffer).

Note that a DSB is only needed in the flush_tlb_kernel_* functions
since the completion is guaranteed by a mode change (i.e. switching
back to user mode) for the flush_tlb_user_* functions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-07 14:42:27 +00:00
Andrew Victor df666b9c51 [ARM] 3325/2: GPIO function to control multi-drive (open collector) capability
Patch from Andrew Victor

This patch adds the at91_set_multi_drive() function to enable/disable
the multi-drive (open collector) pin capability on the AT91RM9200
processor.

This is necessary to fix the UDC (USB Gadget) driver for the AT91RM9200
board as it will not allow the board reset line to be pulled low if the
pullup is not driven as an open collector output as the boards are wired
to the USB connector on both the DK/EK.

This version of the patch updates it to 2.6.16-rc4.
Orignal patch by Jeff Warren.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22 21:23:35 +00:00
Alessandro Zummo af898b8f60 [ARM] 3343/1: NAS100d: Fix incorrect I2C pin assignment
Patch from Alessandro Zummo

The I2C pin assignment for the Iomega NAS100d board was incorrect.  This
patch fixes it.  The correct assignment has now been tested using the
new RTC class and a new driver for the RTC on the NAS100d.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22 21:12:06 +00:00
Linus Torvalds a5222049f3 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2006-02-17 08:13:11 -08:00
Nicolas Pitre d9db950cfa [ARM] 3339/1: ARM EABI: make unmuxed syscalls visible
Patch from Nicolas Pitre

With EABI the multiplex sys_ipc and sys_socketcall syscalls are
unavailable and their support code even removed from the compiled
kernel, and the new unmuxed syscalls must be used instead.

Make those syscall numbers visible.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-16 22:36:15 +00:00
Russell King 7bbb794031 [ARM] Fix SMP initialisation oops
A change to the SMP initialisation caused the following oops:

 CPU1: Booted secondary processor
 CPU1: D VIPT write-back cache
 CPU1: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
 CPU1: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
 <7>Calibrating delay loop... 83.14 BogoMIPS (lpj=415744)
 <1>Unable to handle kernel NULL pointer dereference at virtual address 0000001c
 ...
 PC is at enqueue_task+0x1c/0x64
 LR is at activate_task+0xcc/0xe4

SMP initialisation now requires cpu_possible_map to be initialised in
setup_arch().  Move this from smp_prepare_cpus() to smp_init_cpus()
and call it from our setup_arch() if CONFIG_SMP is enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-16 11:08:09 +00:00
Michael S. Tsirkin 5f6164f309 [PATCH] add asm-generic/mman.h
Make new MADV_REMOVE, MADV_DONTFORK, MADV_DOFORK consistent across all
arches.  The idea is to make it possible to use them portably even before
distros include them in libc headers.

Move common flags to asm-generic/mman.h

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15 15:32:22 -08:00
Michael S. Tsirkin f822566165 [PATCH] madvise MADV_DONTFORK/MADV_DOFORK
Currently, copy-on-write may change the physical address of a page even if the
user requested that the page is pinned in memory (either by mlock or by
get_user_pages).  This happens if the process forks meanwhile, and the parent
writes to that page.  As a result, the page is orphaned: in case of
get_user_pages, the application will never see any data hardware DMA's into
this page after the COW.  In case of mlock'd memory, the parent is not getting
the realtime/security benefits of mlock.

In particular, this affects the Infiniband modules which do DMA from and into
user pages all the time.

This patch adds madvise options to control whether memory range is inherited
across fork.  Useful e.g.  for when hardware is doing DMA from/into these
pages.  Could also be useful to an application wanting to speed up its forks
by cutting large areas out of consideration.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14 16:09:34 -08:00
Ben Dooks e198168083 [ARM] 3326/1: H1940 - Control latches
Patch from Ben Dooks

Define the bits for the two board control latches
that control various items on the H1940 iPAQ.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-10 22:40:51 +00:00
Tony Lindgren 53d9cc7395 [ARM] 3279/1: OMAP: 1/3 Fix low-level io init
Patch from Tony Lindgren

This patch adds the missing cache flushes to common low-level
init that are needed to access the IO region. These flushes
are normally done at the end of devicemaps_init(), but we
need to detect the OMAP core type early.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08 22:06:45 +00:00
Nicolas Pitre 365bf8ac6f [ARM] 3311/1: clean up include/asm-arm/mutex.h
Patch from Nicolas Pitre

Since:

	if (unlikely(__res || __ex_flag))

produces worse code on ARM than:

	if (unlikely(__res | __ex_flag))

I therefore made it more explicit:

	__res |= __ex_flag;
	if (unlikely(__res != 0))

so it is not seen as a typo again.

Also made everything static inline rather than macros for better readability
(both produce the same code after all).

And finally added missing \t from multi-line assembly code.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08 21:19:38 +00:00
Lucas Correia Villa Real 0ca5bc3de7 [ARM] 3284/1: S3C2400 - adds support to GPIO
Patch from Lucas Correia Villa Real

This patch adds support to GPIO on the S3C2400, which is going to
be used by the GP32 machine and the SMDK2400 development board.

Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-01 21:24:23 +00:00
Richard Purdie 62500d1f8e [ARM] 3292/1: Fix memory corruption in asm-arm/checksum.h: ip_fast_csum()
Patch from Richard Purdie

ip_fast_csum() accesses memory via a pointer (iph) within an
asm function. To prevent memory corruption when the function is
inlined, it needs "memory" on the clobber list.

This fixes ip checksum errors reported by a Zaurus user.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-01 19:26:00 +00:00
George G. Davis 7efb83002b [ARM] 3269/1: Add ARMv6 MT_NONSHARED_DEVICE mem_types[] index
Patch from George G. Davis

This Freescale Semiconductor, Inc. contributed patch adds mem_types[]
support for ARMv6 non-shared device memory region attributes. This
implementation provides support for only first level section mapped
non-shared devices. Second level non-shared device mappings are not
yet supported.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-26 15:21:28 +00:00
Lucas Correia Villa Real 0367a8d37a [ARM] 3266/1: S3C2400 - adds macro S3C24XX
Patch from Lucas Correia Villa Real

This patch defines S3C2400 memory map and adds a S3C24XX macro for
common resources between S3C2400, S3C2410 and S3C2440 cpus.

Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-26 15:20:50 +00:00
Russell King 37b797b270 Merge master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-upstream 2006-01-18 22:56:29 +00:00
David Vrabel 68477d1176 [ARM] 3267/1: PXA27x SSP controller register defines
Patch from David Vrabel

PXA27x SSP controller has a few different registers, including SCR (serial clock rate) in SSCR0.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-18 22:38:44 +00:00
Tony Lindgren f07adc591e ARM: OMAP: 1/4 Fix clock framework to use clk_enable/disable
This patch fixes OMAP clock framework to use clk_enable/disable
instead of clk_use/unuse as specified in include/linux/clk.h.

Instances of clk_use/unuse are renamed to clk_enable/disable,
and references clk_use/unuse are removed.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-17 15:27:09 -08:00
Russell King ef0498a7bf [ARM] Fix missing compiler.h include
asm/mach/arch.h introduced a __deprecated, but didn't include compiler.h,
causing:

In file included from arch/arm/mach-at91rm9200/devices.c:13:
include/asm/mach/arch.h:23: warning: no semicolon at end of struct or union
include/asm/mach/arch.h:23: error: syntax error before 'phys_ram'
include/asm/mach/arch.h:34: error: syntax error before ':' token
include/asm/mach/arch.h:35: error: syntax error before ':' token
include/asm/mach/arch.h:36: error: syntax error before ':' token
include/asm/mach/arch.h:37: error: syntax error before ':' token
include/asm/mach/arch.h:45: error: syntax error before '}' token

Add the necessary include.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-15 17:03:45 +00:00
Nicolas Pitre 3f471126ee [ARM] 3262/4: allow ptraced syscalls to be overriden
Patch from Nicolas Pitre

This is needed by strace to properly handle the tracing of some system
calls. It could be useful for other applications as well.

Based on an earlier patch from Daniel Jacobowitz.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Daniel Jacobowitz <dan@debian.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14 19:30:04 +00:00
Nicolas Pitre dd35afc22b [ARM] 3110/5: old ABI compat: multi-ABI syscall entry support
Patch from Nicolas Pitre

This patch adds the required code to support both user space ABIs at
the same time. A second syscall table is created to include legacy ABI
syscalls that need an ABI compat wrapper.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14 16:36:12 +00:00
Nicolas Pitre 713c481519 [ARM] 3108/2: old ABI compat: statfs64 and fstatfs64
Patch from Nicolas Pitre

struct statfs64 has extra padding with EABI growing its size from 84 to
88. This struct is now __attribute__((packed,aligned(4))) with a small
assembly wrapper to force the sz argument to 84 if it is 88 to avoid
copying the extra padding over user space memory unexpecting it.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14 16:35:03 +00:00
Nicolas Pitre c155fc95be [ARM] 3106/2: ARM EABI: some syscall adjustments
Patch from Nicolas Pitre

Fix a few syscalls for EABI requirements. They were sys_pread64 and
sys_pwrite64 where the last argument is now entirely pushed on stack,
but since commit 567bd98017 they don't
require any fixup.  Remains only the stat64 structure. Non EABI kernels
are unaffected.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14 16:32:12 +00:00
Nicolas Pitre 3f2829a315 [ARM] 3105/4: ARM EABI: new syscall entry convention
Patch from Nicolas Pitre

For a while we wanted to change the way syscalls were called on ARM.
Instead of encoding the syscall number in the swi instruction which
requires reading back the instruction from memory to extract that number
and polluting the data cache, it was decided that simply storing the
syscall number into r7 would be more efficient. Since this represents
an ABI change then making that change at the same time as EABI support
is the right thing to do.

It is now expected that EABI user space binaries put the syscall number
into r7 and use "swi 0" to call the kernel. Syscall register argument
are also expected to have "EABI arrangement" i.e. 64-bit arguments
should be put in a pair of registers from an even register number.

Example with long ftruncate64(unsigned int fd, loff_t length):

	legacy ABI:
	- put fd into r0
	- put length into r1-r2
	- use "swi #(0x900000 + 194)" to call the kernel

	new ARM EABI:
	- put fd into r0
	- put length into r2-r3 (skipping over r1)
	- put 194 into r7
	- use "swi 0" to call the kernel

Note that it is important to use 0 for the swi argument as backward
compatibility with legacy ABI user space relies on this.
The syscall macros in asm-arm/unistd.h were also updated to support
both ABIs and implement the right call method automatically.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14 16:31:29 +00:00
Nicolas Pitre 2dede2d8e9 [ARM] 3102/1: ARM EABI: stack pointer must be 64-bit aligned after a CPU exception
Patch from Nicolas Pitre

The ARM EABI says that the stack pointer has to be 64-bit aligned for
reasons already mentioned in patch #3101 when calling C functions.

We therefore must verify and adjust sp accordingly when taking an
exception from kernel mode since sp might not necessarily be 64-bit
aligned if the exception occurs in the middle of a kernel function.

If the exception occurs while in user mode then no sp fixup is needed as
long as sizeof(struct pt_regs) as well as any additional syscall data
stack space remain multiples of 8.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14 16:18:08 +00:00
Nicolas Pitre da2b1cd619 [ARM] 3101/1: ARM EABI: slab memory must be 64-bit aligned
Patch from Nicolas Pitre

Although ARM is still using 32-bit pointers, version 5 and later
versions of the ARM architecture introduced the ldrd and strd
instructions to move 64-bit data which must be 64-bit aligned in memory,
and the EABI includes new constraints on structure data alignment to
allow for the compiler to use those instructions. This means that any
slab allocation must start on a 64-bit boundary which is not equivalent
to BYTES_PER_WORD, especially on those architecture versions that
implements the ldrd/strd instructions.

Overriding the default alignment disables some slab debug features. If
those debug features are really needed then the kernel will have to be
compiled for version 4 of the ARM architecture.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14 16:18:07 +00:00
Russell King fa0fe48fcc [ARM] Separate VIC (vectored interrupt controller) support from Versatile
Other machines may wish to make use of the VIC support code, so
move it to arch/arm/common.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 21:30:48 +00:00
Hyok S. Choi e72b04756f [ARM] start_thread fixup for nommu mode
This patch supports start_thread in nommu mode which requires the
base index register.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 21:04:17 +00:00
Nicolas Pitre 946d4935fc [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)
Patch from Nicolas Pitre

This field is redundent since it must be equal to PHYS_OFFSET anyway.

Now that no code uses it anymore, mark it deprecated and remove all
initializations from the tree.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 20:51:52 +00:00
Lennert Buytenhek dd29c72771 [ARM] 3257/1: ixp2000: map in scratch and sram
Patch from Lennert Buytenhek

For the ixp2000 netdev driver, we need to map in a chunk of SRAM (to
store the transmit and receive descriptors) and the scratch get/put
area (so that we can use the scratchpad rings in the cpu for managing
the descriptors.)  These are the final two mappings needed for the
netdev driver and the last missing piece for the driver in mainline
to work.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 20:51:43 +00:00
Linus Torvalds bf785ee0ae Merge master.kernel.org:/home/rmk/linux-2.6-arm 2006-01-12 12:23:49 -08:00
Al Viro f5a61d0c13 [PATCH] death of get_thread_info/put_thread_info
{get,put}_thread_info() were introduced in 2.5.4 and never
had been called by anything in the tree.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:59 -08:00
Al Viro 32d39a9355 [PATCH] arm: task_stack_page()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:56 -08:00
Al Viro 815d5ec86e [PATCH] arm: task_pt_regs()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:55 -08:00
Al Viro e7c1b32fd3 [PATCH] arm: task_thread_info()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:55 -08:00
Ingo Molnar 4dc7a0bbeb [PATCH] sched: add cacheflush() asm
Add per-arch sched_cacheflush() which is a write-back cacheflush used by
the migration-cost calibration code at bootup time.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:49 -08:00
Kevin Hilman 37134cd55d [ARM] 3209/1: Configurable DMA-consistent memory region
Patch from Kevin Hilman

This patch increase available DMA-consistent memory allocated by dma_coherent_alloc(). The default remains at 2M (defined in asm/memory.h) and each platform has the ability to override in asm/arch-foo/memory.h.

Signed-off-by: Kevin Hilman <kevin@hilman.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-12 16:12:21 +00:00
Nicolas Pitre a3e4943686 [ARM] 3252/1: help gcc do the best with ___arch__swab32
Patch from Nicolas Pitre

Depending on your gcc version, the current C-only implementation would
produce suboptimal code, ranging from a bad register selection forcing
an additional mov instruction to a failure to merge the eor and the ror
in a single instruction.  With a little help gcc always produces the
best code.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10 19:48:02 +00:00
Andrew Victor 1e6c9c2878 [ARM] 3242/2: AT91RM9200 support for 2.6 (Serial)
Patch from Andrew Victor

This patch adds support to the 2.6 kernel series for the Atmel
AT91RM9200 processor.

This patch is the Serial driver.

This version uses the newly re-written GPL'ed hardware headers.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10 16:59:27 +00:00
Brian Gerst af4cd3fe4c [PATCH] Generic ioctl.h
Most arches copied the i386 ioctl.h.  Combine them into a generic header.

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:34 -08:00
Linus Torvalds 80c0531514 Merge master.kernel.org:/pub/scm/linux/kernel/git/mingo/mutex-2.6 2006-01-09 17:31:38 -08:00
Nicolas Pitre 823d0f4f67 [PATCH] mutex subsystem, add include/asm-arm/mutex.h
add the ARM version of mutex.h, which is optimized in assembly for
ARMv6, and uses the xchg implementation on pre-ARMv6.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09 15:59:18 -08:00
Ingo Molnar ffbf670f5c [PATCH] mutex subsystem, add atomic_xchg() to all arches
add atomic_xchg() to all the architectures. Needed by the new mutex code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
2006-01-09 15:59:17 -08:00
Deepak Saxena 9d4ae7276a [ARM] 3070/2: Add __ioremap_pfn() API
Patch from Deepak Saxena

In working on adding 36-bit addressed supersection support to ioremap(),
I came to the conclusion that it would be far simpler to do so by just
splitting __ioremap() into a main external interface and adding an
__ioremap_pfn() function that takes a pfn + offset into the page that
__ioremap() can call. This way existing callers of __ioremap() won't have
to change their code and 36-bit systems will just call __ioremap_pfn()
and we will not have to deal with unsigned long long variables.

Note that __ioremap_pfn() should _NOT_ be called directly by drivers
but is reserved for use by arch_ioremap() implementations that map
32-bit resource regions into the real 36-bit address and then call
this new function.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 19:23:11 +00:00
Russell King 0a3a98f6dd Merge Linus' tree. 2006-01-09 19:18:33 +00:00
Russell King 8ef12c9f01 [ARM] AT91RM9200 doesn't need anything in dma.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:08:11 +00:00
SAN People 73a59c1c4a [ARM] 3240/2: AT91RM9200 support for 2.6 (Core)
Patch from SAN People

Following changes were made to clock.c:

1) Replaced <asm/hardware/clock.h> with <linux/clk.h>
2) Removed old unused clk_enable & clk_disable.
3) Replaced clk_use/clk_unuse with clk_enable/clk_disable.

Otherwise it's the same as the previous patch.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
Russell King 9ded96f24c [PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to
detect various interrupt edges and/or levels.  For some platforms, this is
critical to setup correctly, particularly those which the setting is dependent
on the device.

Currently, ARM drivers do (eg) the following:

	err = request_irq(irq, ...);

	set_irq_type(irq, IRQT_RISING);

However, if the interrupt has previously been programmed to be level sensitive
(for whatever reason) then this will cause an interrupt storm.

Hence, if we combine set_irq_type() with request_irq(), we can then safely set
the type prior to unmasking the interrupt.  The unfortunate problem is that in
order to support this, these flags need to be visible outside of the ARM
architecture - drivers such as smc91x need these flags and they're
cross-architecture.

Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the
property that the device would like.  The IRQ controller code should do its
best to select the most appropriate supported mode.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:46 -08:00