Commit Graph

178 Commits

Author SHA1 Message Date
Kay Sievers e454cea20b Driver-Core: extend devnode callbacks to provide permissions
This allows subsytems to provide devtmpfs with non-default permissions
for the device node. Instead of the default mode of 0600, null, zero,
random, urandom, full, tty, ptmx now have a mode of 0666, which allows
non-privileged processes to access standard device nodes in case no
other userspace process applies the expected permissions.

This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-19 12:50:38 -07:00
Kay Sievers 2b2af54a5b Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev
Devtmpfs lets the kernel create a tmpfs instance called devtmpfs
very early at kernel initialization, before any driver-core device
is registered. Every device with a major/minor will provide a
device node in devtmpfs.

Devtmpfs can be changed and altered by userspace at any time,
and in any way needed - just like today's udev-mounted tmpfs.
Unmodified udev versions will run just fine on top of it, and will
recognize an already existing kernel-created device node and use it.
The default node permissions are root:root 0600. Proper permissions
and user/group ownership, meaningful symlinks, all other policy still
needs to be applied by userspace.

If a node is created by devtmps, devtmpfs will remove the device node
when the device goes away. If the device node was created by
userspace, or the devtmpfs created node was replaced by userspace, it
will no longer be removed by devtmpfs.

If it is requested to auto-mount it, it makes init=/bin/sh work
without any further userspace support. /dev will be fully populated
and dynamic, and always reflect the current device state of the kernel.
With the commonly used dynamic device numbers, it solves the problem
where static devices nodes may point to the wrong devices.

It is intended to make the initial bootup logic simpler and more robust,
by de-coupling the creation of the inital environment, to reliably run
userspace processes, from a complex userspace bootstrap logic to provide
a working /dev.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Tested-By: Harald Hoyer <harald@redhat.com>
Tested-By: Scott James Remnant <scott@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:49 -07:00
David Brownell a4dbd6740d driver model: constify attribute groups
Let attribute group vectors be declared "const".  We'd
like to let most attribute metadata live in read-only
sections... this is a start.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:47 -07:00
Greg Kroah-Hartman b402843787 Driver core: move dev_get/set_drvdata to drivers/base/dd.c
No one should directly access the driver_data field, so remove the field
and make it private.  We dynamically create the private field now if it
is needed, to handle drivers that call get/set before they are
registered with the driver core.

Also update the copyright notices on these files while we are there.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:47 -07:00
Alan Stern 2023c610dc Driver core: add new device to bus's list before probing
This patch (as1271) affects when new devices get linked into their
bus's list of devices.  Currently this happens after probing, and it
doesn't happen at all if probing fails.  Clearly this is wrong,
because at that point quite a few symbolic links have already been
created in sysfs.  We are committed to adding the device, so it should
be linked into the bus's list regardless.

In addition, this needs to happen before the uevent announcing the new
device gets issued.  Otherwise user programs might try to access the
device before it has been added to the bus.

To fix both these problems, the patch moves the call to
klist_add_tail() forward from bus_attach_device() to bus_add_device().
Since bus_attach_device() now does nothing but probe for drivers, it
has been renamed to bus_probe_device().  And lastly, the kerneldoc is
updated.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:46 -07:00
Kay Sievers 6fcf53accc Driver Core: add nodename callbacks
This adds the nodename callback for struct class, struct device_type and
struct device, to allow drivers to send userspace hints on the device
name and subdirectory that should be used for it.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:25 -07:00
Greg Kroah-Hartman acc0e90fbc driver core: fix gcc 4.3.3 warnings about string literals
This removes the
	warning: format not a string literal and no format arguments
warnings in the driver core that gcc 4.3.3 complains about.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:25 -07:00
Shaohua Li 401097ea4b driver core: synchronize device shutdown
A patch series to make .shutdown execute asynchronously.  Some drivers's
shutdown can take a lot of time.  The patches can help save some shutdown
time.  The patches use Arjan's async API.


This patch:

synchronize all tasks submitted by .shutdown

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:24 -07:00
Kay Sievers 5c8563d773 Driver Core: do not oops when driver_unregister() is called for unregistered drivers
We also fix a problem with cleaning up properly when initializing
drivers and devices, so checks like this will work successfully.

Portions of the patch by Linus and Greg and Ingo.

Reported-by: Ozan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 14:24:07 -07:00
Kay Sievers 8a577ffc75 driver: dont update dev_name via device_add path
notice one system /proc/iomem some entries missed the name for pci_devices

it turns that dev->dev.kobj name is changed after device_add.

for pci code: via acpi_pci_root_driver.ops.add (aka acpi_pci_root_add)
==> pci_acpi_scan_root is used to scan pci bus/device, and at the same
time we read the resource for pci_dev in the pci_read_bases, we have
res->name = pci_name(pci_dev); pci_name is calling dev_name.

later via acpi_pci_root_driver.ops.start (aka acpi_pci_root_start) ==>
pci_bus_add_device to add all pci_dev in kobj tree.  pci_bus_add_device
will call device_add.

actually in device_add

        /* first, register with generic layer. */
        error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev));
        if (error)
                goto Error;

will get one new name for that kobj, old name is freed.

[Impact: fix corrupted names in /proc/iomem ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-20 08:12:58 -07:00
Greg Kroah-Hartman 014c90dbb9 driver core: prevent device_for_each_child from oopsing
David Vrabel noticed that the wireless usb stack likes to call
device_for_each_chile() with an empty bus.  This used to work fine, but
now oopses.  This patch fixes the oops and makes the code behave like it
used to.

Reported-by: David Vrabel <david.vrabel@csr.com>
Tested-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-16 16:17:11 -07:00
Cornelia Huck ffa6a7054d Driver core: Fix device_move() vs. dpm list ordering, v2
dpm_list currently relies on the fact that child devices will
be registered after their parents to get a correct suspend
order. Using device_move() however destroys this assumption, as
an already registered device may be moved under a newly registered
one.

This patch adds a new argument to device_move(), allowing callers
to specify how dpm_list should be adapted.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
Ming Lei f67f129e51 Driver core: implement uevent suppress in kobject
This patch implements uevent suppress in kobject and removes it
from struct device, based on the following ideas:

1,Uevent sending should be one attribute of kobject, so suppressing it
in kobject layer is more natural than in device layer. By this way,
we can do it for other objects embedded with kobject.

2,It may save several bytes for each instance of struct device.(On my
omap3(32bit ARM) based box, can save 8bytes per device object)

This patch also introduces dev_set|get_uevent_suppress() helpers to
set and query uevent_suppress attribute in case to help kobject
as private part of struct device in future.

[This version is against the latest driver-core patch set of Greg,please
ignore the last version.]

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
Greg Kroah-Hartman f791b8c836 driver core: move klist_children into private structure
Nothing outside of the driver core should ever touch klist_children, or
knode_parent, so move them out of the public eye.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:25 -07:00
Greg Kroah-Hartman fb069a5d13 driver core: create a private portion of struct device
This is to be used to move things out of struct device that no code
outside of the driver core should ever touch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:25 -07:00
Kay Sievers 1fa5ae857b driver core: get rid of struct device's bus_id string array
Now that all users of bus_id is gone, we can remove it from struct
device.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:23 -07:00
Randy Dunlap 7cbcf22548 driver-core: fix kernel-doc parameter name
Fix function parameter name in kernel-doc:

Warning(linux-next-20090120//drivers/base/core.c:1289): No description found for parameter 'dev'
Warning(linux-next-20090120//drivers/base/core.c:1289): Excess function parameter 'root' description in 'root_device_unregister'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-28 15:55:48 -08:00
Roland Dreier 7143f7a1a3 driver core: Convert '/' to '!' in dev_set_name()
Commit 3ada8b7e ("block: struct device - replace bus_id with dev_name(),
dev_set_name()") deleted the code in register_disk() that changed a '/'
to a '!' in the device name when registering a disk, but dev_set_name()
does not perform this conversion.

This leads to amusing problems with disks that have '/' in their names:
for example a failure to boot with the root partition on a cciss device,
even though the kernel says it knows about the root device:

    VFS: Cannot open root device "cciss/c0d0p6" or unknown-block(0,0)
    Please append a correct "root=" boot option; here are the available partitions:
    6800        71652960 cciss/c0d0 driver: cciss
      6802               1 cciss/c0d0p2
      6805         2931831 cciss/c0d0p5
      6806        34354908 cciss/c0d0p6
    6810        71652960 cciss/c0d1 driver: cciss

Fix this by adding code to change '/' to '!' in dev_set_name() to handle
this until dev_set_name() is converted to use kobject_set_name().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-20 20:52:08 -08:00
Greg Kroah-Hartman 926beadb3d Revert "driver core: create a private portion of struct device"
This reverts commit 2831fe6f9c.

Turns out that device_initialize shouldn't fail silently.
This series needs to be reworked in order to get into proper
shape.

Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-09 15:06:12 -08:00
Greg Kroah-Hartman e2d4077678 Revert "driver core: move klist_children into private structure"
This reverts commit 11c3b5c3e0.

Turns out that device_initialize shouldn't fail silently.
This series needs to be reworked in order to get into proper
shape.

Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-09 14:55:37 -08:00
Mark McLoughlin 0aa0dc41bf driver core: add root_device_register()
Add support for allocating root device objects which group
device objects under /sys/devices directories.

Also add a sysfs 'module' symlink which points to the owner
of the root device object. This symlink will be used in virtio
to allow userspace to determine which virtio bus implementation
a given device is associated with.

[Includes suggestions from Cornelia Huck]

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:33 -08:00
Alan Stern ec0676ee28 Driver core: move the bus notifier call points
This patch (as1184) changes the location of the notifications in
device_add() and device_del().  Now the BUS_NOTIFY_ADD_DEVICE message
is sent after dpm_sysfs_add(), which is necessary for clients that
want to add attributes to the power/ subdirectory.  The
BUS_NOTIFY_DEL_DEVICE message is correspondingly moved before
dpm_sysfs_remove().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:33 -08:00
Greg Kroah-Hartman 11c3b5c3e0 driver core: move klist_children into private structure
Nothing outside of the driver core should ever touch klist_children, or
knode_parent, so move them out of the public eye.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:32 -08:00
Greg Kroah-Hartman 2831fe6f9c driver core: create a private portion of struct device
This is to be used to move things out of struct device that no code
outside of the driver core should ever touch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:32 -08:00
Kay Sievers 1e0b2cf933 driver core: struct device - replace bus_id with dev_name(), dev_set_name()
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:31 -08:00
Eric W. Biederman 030c1d2bfc kobject: Fix kobject_rename and !CONFIG_SYSFS
When looking at kobject_rename I found two bugs with
that exist when sysfs support is disabled in the kernel.

kobject_rename does not change the name on the kobject when
sysfs support is not compiled in.

kobject_rename without locking attempts to check the
validity of a rename operation, which the kobject layer
simply does not have the infrastructure to do.

This patch documents the previously unstated requirement of
kobject_rename that is the responsibility of the caller to
provide mutual exclusion and to be certain that the new_name
for the kobject is valid.

This patch modifies sysfs_rename_dir in !CONFIG_SYSFS case
to call kobject_set_name to actually change the kobject_name.

This patch removes the bogus and misleading check in kobject_rename
that attempts to see if a rename is valid.  The check is bogus
because we do not have the proper locking.  The check is misleading
because it looks like we can and do perform checking at the kobject
level that we don't.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:52 -07:00
Cornelia Huck 286661b377 Driver core: Fix cleanup in device_create_vargs().
If device_register() in device_create_vargs() fails, the device
must be cleaned up with put_device() (which is also fine on NULL)
instead of kfree().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:49 -07:00
Cornelia Huck 5739411acb Driver core: Clarify device cleanup.
Make the comments on how to use device_initialize(), device_add()
and device_register() a bit clearer - in particular, explicitly
note that put_device() must be used once we tried to add the device
to the hierarchy.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:48 -07:00
Tejun Heo 5a3ceb8616 driver-core: use klist for class device list and implement iterator
Iterating over entries using callback usually isn't too fun especially
when the entry being iterated over can't be manipulated freely.  This
patch converts class->p->class_devices to klist and implements class
device iterator so that the users can freely build their own control
structure.  The users are also free to call back into class code
without worrying about locking.

class_for_each_device() and class_find_device() are converted to use
the new iterators, so their users don't have to worry about locking
anymore either.

Note: This depends on klist-dont-iterate-over-deleted-entries patch
because class_intf->add/remove_dev() depends on proper synchronization
with device removal.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:04 +02:00
Greg Kroah-Hartman c906a48adc driver core: add init_name to struct device
This gives us a way to handle both the bus_id and init_name values being
used for a while during the transition period.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21 10:15:37 -07:00
Alan Stern 3b98aeaf3a PM: don't skip device PM init when CONFIG_PM_SLEEP isn't set and CONFIG_PM is set
This patch (as1124) fixes a couple of bugs in the PM core.  The new
dev->power.status field should be initialized regardless of whether
CONFIG_PM_SLEEP is enabled, and similarly dpm_sysfs_add() should be
called whenever CONFIG_PM is enabled.

The patch separates out the call to dpm_sysfs_add() from the call to
device_pm_add().  As a result device_pm_add() can no longer return an
error, so its return type is changed to void.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Romit Dasgupta <romit@ti.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21 10:15:36 -07:00
Jean Delvare bf9ca69fc8 dev_printk(): constify the `dev' argument
Add const markings to dev_name and dev_driver_string to make it clear that
dev_printk doesn't modify dev.  This is a prerequisite to adding more
const markings to other functions make it clearer, which functions can
modify dev and which can't.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21 10:15:36 -07:00
Arjan van de Ven f810a5cf28 Use WARN() in drivers/base/
Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Cornelia Huck 36ce6dad6e driver core: Suppress sysfs warnings for device_rename().
driver core: Suppress sysfs warnings for device_rename().

Renaming network devices to an already existing name is not
something we want sysfs to print a scary warning for, since the
callers can deal with this correctly. So let's introduce
sysfs_create_link_nowarn() which gets rid of the common warning.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:55:01 -07:00
Dave Young f75b1c60fc class: change internal semaphore to a mutex
Now that the lockdep infrastructure in the class core is in place, we
should be able to properly change the internal class semaphore to be a
mutex.

David wrote the original patch, and Greg fixed it up to apply properly
due to all of the recent changes in this area.

From: Dave Young <hidave.darkstar@gmail.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:52 -07:00
Greg Kroah-Hartman d9a0157328 class: rename "sem" to "class_sem" in internal class structure
This renames the struct class "sem" field to be "class_sem" to make
things easier when struct bus_type and struct class merge in the future.
It also makes grepping for fields easier as well.

Based on an idea from Kay.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:52 -07:00
Greg Kroah-Hartman 1fbfee6c6d class: rename "subsys" to "class_subsys" in internal class structure
This renames the struct class "subsys" field to be "class_subsys" to
make things easier when struct bus_type and struct class merge in the
future.  It also makes grepping for fields easier as well.

Based on an idea from Kay.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:52 -07:00
Greg Kroah-Hartman 184f1f779d class: rename "interfaces" to "class_interfaces" in internal class structure
This renames the struct class "interfaces" field to be
"class_interfaces" to make things easier when struct bus_type and struct
class merge in the future.  It also makes grepping for fields easier as
well.

Based on an idea from Kay.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:51 -07:00
Greg Kroah-Hartman 97ae69fdba class: rename "devices" to "class_devices" in internal class structure
This renames the struct class "devices" field to be "class_devices" to
make things easier when struct bus_type and struct class merge in the
future.  It also makes grepping for fields easier as well.

Based on an idea from Kay.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:51 -07:00
Greg Kroah-Hartman 7c71448b8a class: move driver core specific parts to a private structure
This moves the portions of struct class that are dynamic (kobject and
lock and lists) out of the main structure and into a dynamic, private,
structure.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:51 -07:00
Greg Kroah-Hartman 695794ae0c Driver Core: add ability for class_find_device to start in middle of list
This mirrors the functionality that driver_find_device has as well.

We add a start variable, and all callers of the function are fixed up at
the same time.

The block layer will be using this new functionality in a follow-on
patch.


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:47 -07:00
Greg Kroah-Hartman 4e10673944 device create: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Keep the device_create_drvdata macro around to make merges easier.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:47 -07:00
Greg Kroah-Hartman ccea44fadc driver core: remove device_create()
There are no more users of this, and it is racy.  Use
device_create_drvdata() or device_create_vargs() instead.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:47 -07:00
Dan Williams e105b8bfc7 sysfs: add /sys/dev/{char,block} to lookup sysfs path by major:minor
Why?:
There are occasions where userspace would like to access sysfs
attributes for a device but it may not know how sysfs has named the
device or the path.  For example what is the sysfs path for
/dev/disk/by-id/ata-ST3160827AS_5MT004CK?  With this change a call to
stat(2) returns the major:minor then userspace can see that
/sys/dev/block/8:32 links to /sys/block/sdc.

What are the alternatives?:
1/ Add an ioctl to return the path: Doable, but sysfs is meant to reduce
   the need to proliferate ioctl interfaces into the kernel, so this
   seems counter productive.

2/ Use udev to create these symlinks: Also doable, but it adds a
   udev dependency to utilities that might be running in a limited
   environment like an initramfs.

3/ Do a full-tree search of sysfs.

[kay.sievers@vrfy.org: fix duplicate registrations]
[kay.sievers@vrfy.org: cleanup suggestions]

Cc: Neil Brown <neilb@suse.de>
Cc: Tejun Heo <htejun@gmail.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Reviewed-by: SL Baur <steve@xemacs.org>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Mark Lord <lkml@rtr.ca>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:40 -07:00
Randy Dunlap 4623236619 dev_set_name: fix missing kernel-doc
Fix kernel-doc for new dev_set_name() function:

Warning(lin2626-rc5//drivers/base/core.c:767): No description found for parameter 'fmt'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-11 16:50:40 -07:00
Stephen Rothwell 413c239fad driver-core: prepare for 2.6.27 api change by adding dev_set_name
Create the dev_set_name function now so that various subsystems can
start changing over to it before other changes in 2.6.27 will make it
compulsory.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-29 21:10:01 -07:00
Linus Torvalds e616c63033 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  pktgen: make sure that pktgen_thread_worker has been executed
  [VLAN]: Propagate selected feature bits to VLAN devices
  drivers/atm/: remove CVS keywords
  vlan: Correctly handle device notifications for layered VLAN devices
  net: Fix call to ->change_rx_flags(dev, IFF_MULTICAST) in dev_change_flags()
  net_sched: cls_api: fix return value for non-existant classifiers
  ipsec: Use the correct ip_local_out function
  ipv6 addrconf: Allow infinite prefix lifetime.
  ipv6 route: Fix lifetime in netlink.
  ipv6 addrconf: Fix route lifetime setting in corner case.
  ndisc: Add missing strategies for per-device retrans timer/reachable time settings.
  ipv6: Move <linux/in6.h> from header-y to unifdef-y.
  l2tp: avoid skb truesize bug if headroom is increased
  wireless: Create 'device' symlink in sysfs
  wireless, airo: waitbusy() won't delay
  libertas: fix command timeout after firmware failure
  mac80211: Add RTNL version of ieee80211_iterate_active_interfaces
  mac80211 : Association with 11n hidden ssid ap.
  hostap: fix "registers" registration in procfs
  isdn/capi: Return proper errnos on module init.
  ...
2008-05-20 17:23:03 -07:00
Greg Kroah-Hartman 8882b39421 Driver core: add device_create_vargs and device_create_drvdata
We want to have the drvdata field set properly when creating the device
as sysfs callbacks can assume it is present and it can race the later
setting of this field.

So, create two new functions, deviec_create_vargs() and
device_create_drvdata() that take this new field.

device_create_drvdata() will go away in 2.6.27 as the drvdata field will
just be moved to the device_create() call as it should be.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-20 13:31:53 -07:00
Stephen Hemminger 0599ad53fe sysfs: remove error messages for -EEXIST case
It is possible that the entry in sysfs already exists, one case of this is
when a network device is renamed to bonding_masters. Anyway, in this case
the proper error path is for device_rename to return an error code, not to
generate bogus backtrace and errors.

Also, to avoid possible races, the create link should be done before the
remove link. This makes a device rename atomic operation like other renames.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-14 22:34:16 -07:00
Yinghai Lu 0d358f22f6 driver core: try parent numa_node at first before using default
in the device_add, we try to use use parent numa_node.
need to make sure pci root bus's bridge device numa_node is set.
then we could use device->numa_node direclty for all device.
and don't need to call pcibus_to_node().

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26 23:41:04 +02:00