Commit Graph

472 Commits

Author SHA1 Message Date
Manfred Spraul 3dafccf227 [PATCH] slab: distinguish between object and buffer size
An object cache has two different object lengths:

  - the amount of memory available for the user (object size)
  - the amount of memory allocated internally (buffer size)

This patch does some renames to make the code reflect that better.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:17 -08:00
Christoph Lameter e965f9630c [PATCH] Direct Migration V9: Avoid writeback / page_migrate() method
Migrate a page with buffers without requiring writeback

This introduces a new address space operation migratepage() that may be used
by a filesystem to implement its own version of page migration.

A version is provided that migrates buffers attached to pages.  Some
filesystems (ext2, ext3, xfs) are modified to utilize this feature.

The swapper address space operation are modified so that a regular
migrate_page() will occur for anonymous pages without writeback (migrate_pages
forces every anonymous page to have a swap entry).

Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:17 -08:00
Christoph Lameter 7e2ab150d1 [PATCH] Direct Migration V9: upgrade MPOL_MF_MOVE and sys_migrate_pages()
Modify policy layer to support direct page migration

- Add migrate_pages_to() allowing the migration of a list of pages to a a
  specified node or to vma with a specific allocation policy in sets of
  MIGRATE_CHUNK_SIZE pages

- Modify do_migrate_pages() to do a staged move of pages from the source
  nodes to the target nodes.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter a3351e525e [PATCH] Direct Migration V9: remove_from_swap() to remove swap ptes
Add remove_from_swap

remove_from_swap() allows the restoration of the pte entries that existed
before page migration occurred for anonymous pages by walking the reverse
maps.  This reduces swap use and establishes regular pte's without the need
for page faults.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter a48d07afdf [PATCH] Direct Migration V9: migrate_pages() extension
Add direct migration support with fall back to swap.

Direct migration support on top of the swap based page migration facility.

This allows the direct migration of anonymous pages and the migration of file
backed pages by dropping the associated buffers (requires writeout).

Fall back to swap out if necessary.

The patch is based on lots of patches from the hotplug project but the code
was restructured, documented and simplified as much as possible.

Note that an additional patch that defines the migrate_page() method for
filesystems is necessary in order to avoid writeback for anonymous and file
backed pages.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Mike Kravetz <kravetz@us.ibm.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter b16664e44c [PATCH] Direct Migration V9: PageSwapCache checks
Check for PageSwapCache after looking up and locking a swap page.

The page migration code may change a swap pte to point to a different page
under lock_page().

If that happens then the vm must retry the lookup operation in the swap space
to find the correct page number.  There are a couple of locations in the VM
where a lock_page() is done on a swap page.  In these locations we need to
check afterwards if the page was migrated.  If the page was migrated then the
old page that was looked up before was freed and no longer has the
PageSwapCache bit set.

Signed-off-by: Hirokazu Takahashi <taka@valinux.co.jp>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Christoph Lameter <clameter@@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter 2a16e3f4b0 [PATCH] Reclaim slab during zone reclaim
If large amounts of zone memory are used by empty slabs then zone_reclaim
becomes uneffective.  This patch shakes the slab a bit.

The problem with this patch is that the slab reclaim is not containable to a
zone.  Thus slab reclaim may affect the whole system and be extremely slow.
This also means that we cannot determine how many pages were freed in this
zone.  Thus we need to go off node for at least one allocation.

The functionality is disabled by default.

We could modify the shrinkers to take a zone parameter but that would be quite
invasive.  Better ideas are welcome.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter 1b2ffb7896 [PATCH] Zone reclaim: Allow modification of zone reclaim behavior
In some situations one may want zone_reclaim to behave differently.  For
example a process writing large amounts of memory will spew unto other nodes
to cache the writes if many pages in a zone become dirty.  This may impact the
performance of processes running on other nodes.

Allowing writes during reclaim puts a stop to that behavior and throttles the
process by restricting the pages to the local zone.

Similarly one may want to contain processes to local memory by enabling
regular swap behavior during zone_reclaim.  Off node memory allocation can
then be controlled through memory policies and cpusets.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter 2a11ff06d7 [PATCH] zone_reclaim: configurable off node allocation period.
Currently the zone_reclaim code has a fixed window of 30 seconds of off node
allocations should a local zone have no unused pagecache pages left.  Reclaim
will be attempted again after this timeout period to avoid repeated useless
scans for memory.  This is also useful to established sufficiently large off
node allocation chunks to relieve the local node.

It may be beneficial to adjust that time period for some special situations.
For example if memory use was exceeding node capacity one may want to give up
for longer periods of time.  If memory spikes intermittendly then one may want
to shorten the time period to reduce the number of off node allocations.

This patch allows just that....

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter a92f71263a [PATCH] zone_reclaim: partial scans instead of full scan
Instead of scanning all the pages in a zone, imitate real swap and scan
only a portion of the pages and gradually scan more if we do not free up
enough pages.  This avoids a zone suddenly loosing all unused pagecache
pages (we may after all access some of these again so they deserve another
chance) but it still frees up large chunks of memory if a zone only
contains unused pagecache pages.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:16 -08:00
Christoph Lameter aa3f18b339 [PATCH] zone_reclaim: do not unmap file backed pages
zone_reclaim should leave that to the real swapper.  We are only interested
in evicting unmapped pages.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:15 -08:00
Benjamin LaHaise 9884fd8df1 [PATCH] Use 32 bit division in slab_put_obj()
Improve the performance of slab_put_obj().  Without the cast, gcc considers
ptrdiff_t a 64 bit signed integer and ends up emitting code to use a full
signed 128 bit divide on EM64T, which is substantially slower than a 32 bit
unsigned divide.

I noticed this when looking at the profile of a case where the slab balance
is just on edge and thrashes back and forth freeing a block.

Signed-off-by: Benjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:15 -08:00
Christoph Lameter c84db23c6e [PATCH] zone_reclaim: minor fixes
- If we only reclaim nr_pages then its okay to stay on node.
  Switch from > to >= for the comparison.

- vm_table[] entry for zone_reclaim_mode is a bit screwed up.

- Add empty lines around shrink_zone to show that this is the
  central function to be called.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:15 -08:00
Christoph Lameter 52a8363eae [PATCH] mm: improve function of sc->may_writepage
Make sc->may_writepage control the writeout behavior of shrink_list.

Remove the laptop_mode trick from shrink_list and instead set may_writepage
in try_to_free_pages properly.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:15 -08:00
Christoph Lameter 42c722d4cb [PATCH] zone_reclaim: reclaim on memory only node support
Zone reclaim is usually only run on the local node.  Headless nodes do not
have any local processors.  This patch checks for headless nodes and
performs zone reclaim on them.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:14 -08:00
Christoph Lameter 8928862398 [PATCH] Optimize off-node performance of zone reclaim
Ensure that the performance of off node pages stays the same as before.
Off node pagefault tests showed an 18% drop in performance without this
patch.

- Increase the timeout to 30 seconds to reduce the overhead.

- Move all code possible out of the off node hot path for zone reclaim
  (Sorry Andrew, the struct initialization had to be sacrificed).
  The read_page_state() bit us there.

- Check first for the timeout before any other checks.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:14 -08:00
Ashok Raj 6292d9aaf3 [PATCH] __cpuinit functions wrongly marked __meminit
__meminit has overzelously been modified and crept its way into marking
cpuup callbacks as __meminit.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:09 -08:00
Christoph Lameter 86c562a9d6 [PATCH] mm: optimize numa policy handling in slab allocator
Move the interrupt check from slab_node into ___cache_alloc and adds an
"unlikely()" to avoid pipeline stalls on some architectures.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:18 -08:00
Christoph Lameter dc85da15d4 [PATCH] NUMA policies in the slab allocator V2
This patch fixes a regression in 2.6.14 against 2.6.13 that causes an
imbalance in memory allocation during bootup.

The slab allocator in 2.6.13 is not numa aware and simply calls
alloc_pages().  This means that memory policies may control the behavior of
alloc_pages().  During bootup the memory policy is set to MPOL_INTERLEAVE
resulting in the spreading out of allocations during bootup over all
available nodes.  The slab allocator in 2.6.13 has only a single list of
slab pages.  As a result the per cpu slab cache and the spinlock controlled
page lists may contain slab entries from off node memory.  The slab
allocator in 2.6.13 makes no effort to discern the locality of an entry on
its lists.

The NUMA aware slab allocator in 2.6.14 controls locality of the slab pages
explicitly by calling alloc_pages_node().  The NUMA slab allocator manages
slab entries by having lists of available slab pages for each node.  The
per cpu slab cache can only contain slab entries associated with the node
local to the processor.  This guarantees that the default allocation mode
of the slab allocator always assigns local memory if available.

Setting MPOL_INTERLEAVE as a default policy during bootup has no effect
anymore.  In 2.6.14 all node unspecific slab allocations are performed on
the boot processor.  This means that most of key data structures are
allocated on one node.  Most processors will have to refer to these
structures making the boot node a potential bottleneck.  This may reduce
performance and cause unnecessary memory pressure on the boot node.

This patch implements NUMA policies in the slab layer.  There is the need
of explicit application of NUMA memory policies by the slab allcator itself
since the NUMA slab allocator does no longer let the page_allocator control
locality.

The check for policies is made directly at the beginning of __cache_alloc
using current->mempolicy.  The memory policy is already frequently checked
by the page allocator (alloc_page_vma() and alloc_page_current()).  So it
is highly likely that the cacheline is present.  For MPOL_INTERLEAVE
kmalloc() will spread out each request to one node after another so that an
equal distribution of allocations can be obtained during bootup.

It is not possible to push the policy check to lower layers of the NUMA
slab allocator since the per cpu caches are now only containing slab
entries from the current node.  If the policy says that the local node is
not to be preferred or forbidden then there is no point in checking the
slab cache or local list of slab pages.  The allocation better be directed
immediately to the lists containing slab entries for the allowed set of
nodes.

This way of applying policy also fixes another strange behavior in 2.6.13.
alloc_pages() is controlled by the memory allocation policy of the current
process.  It could therefore be that one process is running with
MPOL_INTERLEAVE and would f.e.  obtain a new page following that policy
since no slab entries are in the lists anymore.  A page can typically be
used for multiple slab entries but lets say that the current process is
only using one.  The other entries are then added to the slab lists.  These
are now non local entries in the slab lists despite of the possible
availability of local pages that would provide faster access and increase
the performance of the application.

Another process without MPOL_INTERLEAVE may now run and expect a local slab
entry from kmalloc().  However, there are still these free slab entries
from the off node page obtained from the other process via MPOL_INTERLEAVE
in the cache.  The process will then get an off node slab entry although
other slab entries may be available that are local to that process.  This
means that the policy if one process may contaminate the locality of the
slab caches for other processes.

This patch in effect insures that a per process policy is followed for the
allocation of slab entries and that there cannot be a memory policy
influence from one process to another.  A process with default policy will
always get a local slab entry if one is available.  And the process using
memory policies will get its memory arranged as requested.  Off-node slab
allocation will require the use of spinlocks and will make the use of per
cpu caches not possible.  A process using memory policies to redirect
allocations offnode will have to cope with additional lock overhead in
addition to the latency added by the need to access a remote slab entry.

Changes V1->V2
- Remove #ifdef CONFIG_NUMA by moving forward declaration into
  prior #ifdef CONFIG_NUMA section.

- Give the function determining the node number to use a saner
  name.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:18 -08:00
Ingo Molnar fc0abb1451 [PATCH] sem2mutex: mm/slab.c
Convert mm/swapfile.c's swapon_sem to swapon_mutex.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:18 -08:00
Christoph Lameter 9eeff2395e [PATCH] Zone reclaim: Reclaim logic
Some bits for zone reclaim exists in 2.6.15 but they are not usable.  This
patch fixes them up, removes unused code and makes zone reclaim usable.

Zone reclaim allows the reclaiming of pages from a zone if the number of
free pages falls below the watermarks even if other zones still have enough
pages available.  Zone reclaim is of particular importance for NUMA
machines.  It can be more beneficial to reclaim a page than taking the
performance penalties that come with allocating a page on a remote zone.

Zone reclaim is enabled if the maximum distance to another node is higher
than RECLAIM_DISTANCE, which may be defined by an arch.  By default
RECLAIM_DISTANCE is 20.  20 is the distance to another node in the same
component (enclosure or motherboard) on IA64.  The meaning of the NUMA
distance information seems to vary by arch.

If zone reclaim is not successful then no further reclaim attempts will
occur for a certain time period (ZONE_RECLAIM_INTERVAL).

This patch was discussed before. See

http://marc.theaimsgroup.com/?l=linux-kernel&m=113519961504207&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113408418232531&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113389027420032&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=113380938612205&w=2

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:17 -08:00
Christoph Lameter f1fd1067ec [PATCH] Zone reclaim: resurrect may_swap
Zone reclaim has a huge impact on NUMA performance (f.e.  our maximum
throughput with XFS is raised from 4GB to 6GB/sec / page cache contamination
of numa nodes destroys locality if one just does a large copy operation which
results in performance dropping for good until reboot).

This patch:

Resurrect may_swap in struct scan_control

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:17 -08:00
Christoph Lameter fc30128963 [PATCH] Simplify migrate_page_add
Simplify migrate_page_add after feedback from Hugh.  This also allows us to
drop one parameter from migrate_page_add.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:17 -08:00
Nick Piggin 053837fce7 [PATCH] mm: migration page refcounting fix
Migration code currently does not take a reference to target page
properly, so between unlocking the pte and trying to take a new
reference to the page with isolate_lru_page, anything could happen to
it.

Fix this by holding the pte lock until we get a chance to elevate the
refcount.

Other small cleanups while we're here.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:17 -08:00
Andrew Morton e236a166b2 [PATCH] mm: dirty_exceeded speedup
Ravikiran reports that this variable is bouncing all around nodes on NUMA
machines, causing measurable performance problems.  Fix that up by only
writing to it when it actually changed.

And put it in a new cacheline to prevent it sharing with other things (this
happened).

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:17 -08:00
Matt Tolentino c09b42404d [PATCH] x86_64: add __meminit for memory hotplug
Add __meminit to the __init lineup to ensure functions default
to __init when memory hotplug is not enabled.  Replace __devinit
with __meminit on functions that were changed when the memory
hotplug code was introduced.

Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:18:35 -08:00
Paul Jackson 505970b96e [PATCH] cpuset oom lock fix
The problem, reported in:

  http://bugzilla.kernel.org/show_bug.cgi?id=5859

and by various other email messages and lkml posts is that the cpuset hook
in the oom (out of memory) code can try to take a cpuset semaphore while
holding the tasklist_lock (a spinlock).

One must not sleep while holding a spinlock.

The fix seems easy enough - move the cpuset semaphore region outside the
tasklist_lock region.

This required a few lines of mechanism to implement.  The oom code where
the locking needs to be changed does not have access to the cpuset locks,
which are internal to kernel/cpuset.c only.  So I provided a couple more
cpuset interface routines, available to the rest of the kernel, which
simple take and drop the lock needed here (cpusets callback_sem).

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:10 -08:00
Robin Holt 7339ff8302 [PATCH] Add tmpfs options for memory placement policies
Anything that writes into a tmpfs filesystem is liable to disproportionately
decrease the available memory on a particular node.  Since there's no telling
what sort of application (e.g.  dd/cp/cat) might be dropping large files
there, this lets the admin choose the appropriate default behavior for their
site's situation.

Introduce a tmpfs mount option which allows specifying a memory policy and
a second option to specify the nodelist for that policy.  With the default
policy, tmpfs will behave as it does today.  This patch adds support for
preferred, bind, and interleave policies.

The default policy will cause pages to be added to tmpfs files on the node
which is doing the writing.  Some jobs expect a single process to create
and manage the tmpfs files.  This results in a node which has a
significantly reduced number of free pages.

With this patch, the administrator can specify the policy and nodes for
that policy where they would prefer allocations.

This patch was originally written by Brent Casavant and Hugh Dickins.  I
added support for the bind and preferred policies and the mpol_nodelist
mount option.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:07 -08:00
Linus Torvalds 9f5974c873 Merge git://oss.sgi.com:8090/oss/git/xfs-2.6 2006-01-12 09:10:34 -08:00
Greg Ungerer cbe8dd4af2 [PATCH] memmap_init_zone(): remove uneccesary page++
Remove unecessary page++ from memmap_init_zone loop.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:49 -08:00
Catalin Marinas 2a7e2f7dcb [PATCH] do_truncate() call fix in tiny-shmem.c
Adapt tiny-shmem.c to the new do_truncate() prototype.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:49 -08:00
Christoph Lameter f4598c8b36 [PATCH] migration: make sure there is no attempt to migrate reserved pages.
This ensures that reserved pages are not migrated.  Reserved pages
currently cause the WARN_ON to trigger in migrate_page_add()

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:48 -08:00
Randy.Dunlap c59ede7b78 [PATCH] move capable() to capability.h
- Move capable() from sched.h to capability.h;

- Use <linux/capability.h> where capable() is used
	(in include/, block/, ipc/, kernel/, a few drivers/,
	mm/, security/, & sound/;
	many more drivers/ to go)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00
Paul Jackson 4eac915d02 [PATCH] mm: gfp_atomic comments
Clarify in comments that GFP_ATOMIC means both "don't sleep" and "use
emergency pools", hence both ALLOC_HARDER and ALLOC_HIGH.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:09 -08:00
Hugh Dickins 7365f3d169 [PATCH] Restore KERN_EMERG to each line printed by bad_page
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:08 -08:00
Nathan Scott ddae9c2ea7 Merge HEAD from oss.sgi.com:/oss/git/linux-2.6.git 2006-01-12 13:34:47 +11:00
David Woodhouse a4fc7ab1d0 [PATCH] fix/simplify mutex debugging code
Let's switch mutex_debug_check_no_locks_freed() to take (addr, len) as
arguments instead, since all its callers were just calculating the 'to'
address for themselves anyway... (and sometimes doing so badly).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 08:14:16 -08:00
Christoph Hellwig 78539fdfa4 [XFS] Export pagevec_lookup for use on the XFS page writeout path,
for dealing with delayed allocate and unwritten extents (as well).

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-01-11 20:47:41 +11:00
Jesper Juhl e97a31117c add missing printk loglevel in mm/swapfile.c
in mm/swapfile.c a printk() is missing a loglevel. I believe the proper
loglevel for this situation is KERN_ERR, so that's what the patch below
sets -if you agree, please apply.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-11 01:50:28 +01:00
Christoph Hellwig 870f481793 [PATCH] replace inode_update_time with file_update_time
To allow various options to work per-mount instead of per-sb we need a
struct vfsmount when updating ctime and mtime.  This preparation patch
replaces the inode_update_time routine with a file_update_atime routine so
we can easily get at the vfsmount.  (and the file makes more sense in this
context anyway).  Also get rid of the unused second argument - we always
want to update the ctime when calling this routine.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:30 -08:00
Jes Sorensen 1b1dcc1b57 [PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_sem
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.

Modified-by: Ingo Molnar <mingo@elte.hu>

(finished the conversion)

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09 15:59:24 -08:00
Ingo Molnar de5097c2e7 [PATCH] mutex subsystem, more debugging code
more mutex debugging: check for held locks during memory freeing,
task exit, enable sysrq printouts, etc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
2006-01-09 15:59:21 -08:00
Linus Torvalds 6150c32589 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge 2006-01-09 10:03:44 -08:00
Valentine Barshak 87ba81dba4 [PATCH] fadvise: return ESPIPE on FIFO/pipe
The patch makes posix_fadvise return ESPIPE on FIFO/pipe in order to be
fully POSIX-compliant.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:00 -08:00
OGAWA Hirofumi 28fd129827 [PATCH] Fix and add EXPORT_SYMBOL(filemap_write_and_wait)
This patch add EXPORT_SYMBOL(filemap_write_and_wait) and use it.

See mm/filemap.c:

And changes the filemap_write_and_wait() and filemap_write_and_wait_range().

Current filemap_write_and_wait() doesn't wait if filemap_fdatawrite()
returns error.  However, even if filemap_fdatawrite() returned an
error, it may have submitted the partially data pages to the device.
(e.g. in the case of -ENOSPC)

<quotation>
Andrew Morton writes,

If filemap_fdatawrite() returns an error, this might be due to some
I/O problem: dead disk, unplugged cable, etc.  Given the generally
crappy quality of the kernel's handling of such exceptions, there's a
good chance that the filemap_fdatawait() will get stuck in D state
forever.
</quotation>

So, this patch doesn't wait if filemap_fdatawrite() returns the -EIO.

Trond, could you please review the nfs part?  Especially I'm not sure,
nfs must use the "filemap_fdatawrite(inode->i_mapping) == 0", or not.

Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:47 -08:00
OGAWA Hirofumi 268fc16e34 [PATCH] export/change sync_page_range/_nolock()
This exports/changes the sync_page_range/_nolock().  The fatfs needs
sync_page_range/_nolock() for expanding truncate, and changes "size_t count"
to "loff_t count".

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:47 -08:00
Paul Jackson 4225399a66 [PATCH] cpuset: rebind vma mempolicies fix
Fix more of longstanding bug in cpuset/mempolicy interaction.

NUMA mempolicies (mm/mempolicy.c) are constrained by the current tasks cpuset
to just the Memory Nodes allowed by that cpuset.  The kernel maintains
internal state for each mempolicy, tracking what nodes are used for the
MPOL_INTERLEAVE, MPOL_BIND or MPOL_PREFERRED policies.

When a tasks cpuset memory placement changes, whether because the cpuset
changed, or because the task was attached to a different cpuset, then the
tasks mempolicies have to be rebound to the new cpuset placement, so as to
preserve the cpuset-relative numbering of the nodes in that policy.

An earlier fix handled such mempolicy rebinding for mempolicies attached to a
task.

This fix rebinds mempolicies attached to vma's (address ranges in a tasks
address space.) Due to the need to hold the task->mm->mmap_sem semaphore while
updating vma's, the rebinding of vma mempolicies has to be done when the
cpuset memory placement is changed, at which time mmap_sem can be safely
acquired.  The tasks mempolicy is rebound later, when the task next attempts
to allocate memory and notices that its task->cpuset_mems_generation is
out-of-date with its cpusets mems_generation.

Because walking the tasklist to find all tasks attached to a changing cpuset
requires holding tasklist_lock, a spinlock, one cannot update the vma's of the
affected tasks while doing the tasklist scan.  In general, one cannot acquire
a semaphore (which can sleep) while already holding a spinlock (such as
tasklist_lock).  So a list of mm references has to be built up during the
tasklist scan, then the tasklist lock dropped, then for each mm, its mmap_sem
acquired, and the vma's in that mm rebound.

Once the tasklist lock is dropped, affected tasks may fork new tasks, before
their mm's are rebound.  A kernel global 'cpuset_being_rebound' is set to
point to the cpuset being rebound (there can only be one; cpuset modifications
are done under a global 'manage_sem' semaphore), and the mpol_copy code that
is used to copy a tasks mempolicies during fork catches such forking tasks,
and ensures their children are also rebound.

When a task is moved to a different cpuset, it is easier, as there is only one
task involved.  It's mm->vma's are scanned, using the same
mpol_rebind_policy() as used above.

It may happen that both the mpol_copy hook and the update done via the
tasklist scan update the same mm twice.  This is ok, as the mempolicies of
each vma in an mm keep track of what mems_allowed they are relative to, and
safely no-op a second request to rebind to the same nodes.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:44 -08:00
Paul Jackson 74cb21553f [PATCH] cpuset: numa_policy_rebind cleanup
Cleanup, reorganize and make more robust the mempolicy.c code to rebind
mempolicies relative to the containing cpuset after a tasks memory placement
changes.

The real motivator for this cleanup patch is to lay more groundwork for the
upcoming patch to correctly rebind NUMA mempolicies that are attached to vma's
after the containing cpuset memory placement changes.

NUMA mempolicies are constrained by the cpuset their task is a member of.
When either (1) a task is moved to a different cpuset, or (2) the 'mems'
mems_allowed of a cpuset is changed, then the NUMA mempolicies have embedded
node numbers (for MPOL_BIND, MPOL_INTERLEAVE and MPOL_PREFERRED) that need to
be recalculated, relative to their new cpuset placement.

The old code used an unreliable method of determining what was the old
mems_allowed constraining the mempolicy.  It just looked at the tasks
mems_allowed value.  This sort of worked with the present code, that just
rebinds the -task- mempolicy, and leaves any -vma- mempolicies broken,
referring to the old nodes.  But in an upcoming patch, the vma mempolicies
will be rebound as well.  Then the order in which the various task and vma
mempolicies are updated will no longer be deterministic, and one can no longer
count on the task->mems_allowed holding the old value for as long as needed.
It's not even clear if the current code was guaranteed to work reliably for
task mempolicies.

So I added a mems_allowed field to each mempolicy, stating exactly what
mems_allowed the policy is relative to, and updated synchronously and reliably
anytime that the mempolicy is rebound.

Also removed a useless wrapper routine, numa_policy_rebind(), and had its
caller, cpuset_update_task_memory_state(), call directly to the rewritten
policy_rebind() routine, and made that rebind routine extern instead of
static, and added a "mpol_" prefix to its name, making it
mpol_rebind_policy().

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:44 -08:00
Paul Jackson 909d75a3b7 [PATCH] cpuset: implement cpuset_mems_allowed
Provide a cpuset_mems_allowed() method, which the sys_migrate_pages() code
needed, to obtain the mems_allowed vector of a cpuset, and replaced the
workaround in sys_migrate_pages() to call this new method.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:44 -08:00
Paul Jackson cf2a473c40 [PATCH] cpuset: combine refresh_mems and update_mems
The important code paths through alloc_pages_current() and alloc_page_vma(),
by which most kernel page allocations go, both called
cpuset_update_current_mems_allowed(), which in turn called refresh_mems().
-Both- of these latter two routines did a tasklock, got the tasks cpuset
pointer, and checked for out of date cpuset->mems_generation.

That was a silly duplication of code and waste of CPU cycles on an important
code path.

Consolidated those two routines into a single routine, called
cpuset_update_task_memory_state(), since it updates more than just
mems_allowed.

Changed all callers of either routine to call the new consolidated routine.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:43 -08:00