We don't do any lazy restore anymore, what we have are two pieces of optimization:
- no-FPU tasks that don't save/restore the FPU context (kernel threads are such)
- cached FPU registers maintained via the fpu->last_cpu field. This means that
if an FPU task context switches to a non-FPU task then we can maintain the
FPU registers as an in-FPU copies (cache), and skip the restoration of them
once we switch back to the original FPU-using task.
Update all the comments that still referred to old 'lazy' and 'unlazy' concepts.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-31-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The x86 FPU code used to have a complex state machine where both the FPU
registers and the FPU state context could be 'active' (or inactive)
independently of each other - which enabled features like lazy FPU restore.
Much of this complexity is gone in the current code: now we basically can
have FPU-less tasks (kernel threads) that don't use (and save/restore) FPU
state at all, plus full FPU users that save/restore directly with no laziness
whatsoever.
But the fpu::fpstate_active still carries bits of the old complexity - meanwhile
this flag has become a simple flag that shows whether the FPU context saving
area in the thread struct is initialized and used, or not.
Rename it to fpu::initialized to express this simplicity in the name as well.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-30-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
fpu__activate_fpstate_read() can be called for the current task
when coredumping - or for stopped tasks when ptrace-ing.
Implement this properly in the code and update the comments.
This also fixes an incorrect (but harmless) warning introduced by
one of the earlier patches.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-28-mingo@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
During failover there is a small race window between fc_remote_port_add()
and fc_timeout_deleted_rport(); the latter drops the lock after setting the
port to NOTPRESENT, so if fc_remote_port_add() is called right at that time
it will fail to detect the existing rport and happily adding a new
structure, causing rports to get registered twice.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull compat fix from Al Viro:
"I really wish gcc warned about conversions from pointer to function
into void *..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix a typo in put_compat_shm_info()
Variable total_nr_pages is being initialized and then updated with
the same value, this latter assignment is redundant and can be
removed. Cleans up clang build warning:
Value stored to 'total_nr_pages' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In order to using discard function, it is necessary that not only xfs
is mounted with discard option, but also the discard function is
supported by the device. Current code doesn't output any message when
users mount with discard option on unsupported device, so it is
difficult to notice that it was not enabled actually.
This patch adds the warning message to notice that discard option is
not enabled due to unsupported device when the filesystem is mounted.
Changes in v2 (Suggested by Brian Foster):
- Move the unsupported device check into xfs_fs_fill_super().
- Clear the discard flag when device is unsupported.
Signed-off-by: Kenjiro Nakayama <nakayamakenjiro@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The 'did_zero' param of xfs_zero_range() was not passed to
iomap_zero_range() correctly. This was introduced by commit
7bb41db3ea ("xfs: handle 64-bit length in xfs_iozero"), and found
by code inspection.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xfs_file_aio_write_checks(), variable 'zero' is there only to
satisfy xfs_zero_eof(), the result of it is ignored. Now, with
iomap_zero_range() based xfs_zero_eof(), we can safely pass NULL as
the last param of it and kill 'zero'.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the %pS instead of the %pF printk format specifier for printing symbols
from direct addresses. This is needed for the ia64, ppc64 and parisc64
architectures.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we perform an finsert/fcollapse operation, cancel all the CoW
extents for the affected file offset range so that they don't end up
pointing to the wrong blocks.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we have speculative cow preallocations hanging around in the cow
fork, don't let a truncate operation clear the reflink flag because if
we do then there's a chance we'll forget to free those extents when we
destroy the incore inode.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
"uip" misspelled as "up"; unfortunately, the latter happens to be
a function and gcc is happy to convert it to void *...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The driver_override implementation is susceptible to a race condition when
different threads are reading vs. storing a different driver override. Add
locking to avoid the race condition.
This is in close analogy to commit 6265539776 ("driver core: platform:
fix race condition with driver_override") from Adrian Salido.
Fixes: 782a985d7a ("PCI: Introduce new device binding path using pci_dev.driver_override")
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.16+
When an rport is found in the bindings array there is no guarantee that
it had been a target port, so we need to call fc_remote_port_rolechg()
here to ensure the scsi_target_id is set correctly. Otherwise the port
will never be scanned.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull block fixes from Jens Axboe:
- Two sets of NVMe pull requests from Christoph:
- Fixes for the Fibre Channel host/target to fix spec compliance
- Allow a zero keep alive timeout
- Make the debug printk for broken SGLs work better
- Fix queue zeroing during initialization
- Set of RDMA and FC fixes
- Target div-by-zero fix
- bsg double-free fix.
- ndb unknown ioctl fix from Josef.
- Buffered vs O_DIRECT page cache inconsistency fix. Has been floating
around for a long time, well reviewed. From Lukas.
- brd overflow fix from Mikulas.
- Fix for a loop regression in this merge window, where using a union
for two members of the loop_cmd turned out to be a really bad idea.
From Omar.
- Fix for an iostat regression fix in this series, using the wrong API
to get at the block queue. From Shaohua.
- Fix for a potential blktrace delection deadlock. From Waiman.
* 'for-linus' of git://git.kernel.dk/linux-block: (30 commits)
nvme-fcloop: fix port deletes and callbacks
nvmet-fc: sync header templates with comments
nvmet-fc: ensure target queue id within range.
nvmet-fc: on port remove call put outside lock
nvme-rdma: don't fully stop the controller in error recovery
nvme-rdma: give up reconnect if state change fails
nvme-core: Use nvme_wq to queue async events and fw activation
nvme: fix sqhd reference when admin queue connect fails
block: fix a crash caused by wrong API
fs: Fix page cache inconsistency when mixing buffered and AIO DIO
nvmet: implement valid sqhd values in completions
nvme-fabrics: Allow 0 as KATO value
nvme: allow timed-out ios to retry
nvme: stop aer posting if controller state not live
nvme-pci: Print invalid SGL only once
nvme-pci: initialize queue memory before interrupts
nvmet-fc: fix failing max io queue connections
nvme-fc: use transport-specific sgl format
nvme: add transport SGL definitions
nvme.h: remove FC transport-specific error values
...
The notifier callbacks may want to call some OPP helper routines which
may try to take the same opp_table->lock again and cause a deadlock. One
such usecase was reported by Chanwoo Choi, where calling
dev_pm_opp_disable() leads us to the devfreq's OPP notifier handler,
which further calls dev_pm_opp_find_freq_floor() and it deadlocks.
We don't really need the opp_table->lock to be held across the notifier
call though, all we want to make sure is that the 'opp' doesn't get
freed while being used from within the notifier chain. We can do it with
help of dev_pm_opp_get/put() as well. Let's do it.
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Fixes: 5b650b3888 "PM / OPP: Take kref from _find_opp_table()"
Reported-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This tag is meant for pulling a patch called "gfs2: Fix
debugfs glocks dump" which fixes a regression introduced
by commit 88ffbf3e03. The regression caused the glock
dump in debugfs to not report all the glocks, which makes
debugging extremely difficult.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZyUI8AAoJENeLYdPf93o7iq4IAKhb9wJ8kmpu7LZ5k6Fl8BCy
GFztPe2bKsFG8cul1o1gZx8c/GWORaCHe3ZDI6pxl16/E+AvWoA1pKbBLYB1GSvD
90a7/m6+hx02ZXR/MHxBUQLWYXBtBrVMVcZDCmFMHWYCRUIiX2etPZL8wOXeJLTl
lNCSGdd1+3y6IJbthaIKTt1ctzsR8ZqV4QN786d2C3L9dxZ63FnAV43p3rUBzBLX
B5uT5LTmdWSLRqe0A9rnrPga/BfEnA8GDtIYUMic9Yz0Hq2a3vEnCC3P3Myp0DJZ
PGposwqL/emRhXkC4+ICrGsTOIy1BzwMXLF47GQaB/k+2Rd3/l9r/hU5ESjQOgA=
=taQL
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Bob Peterson:
"GFS2: Fix an old regression in GFS2's debugfs interface
This fixes a regression introduced by commit 88ffbf3e03 ("GFS2: Use
resizable hash table for glocks"). The regression caused the glock dump
in debugfs to not report all the glocks, which makes debugging
extremely difficult"
* tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix debugfs glocks dump
This started out as just replacing the use of crypto/rng with
get_random_bytes_wait, so that we wouldn't use bad randomness at boot
time. But, upon looking further, it appears that there were even deeper
underlying cryptographic problems, and that this seems to have been
committed with very little crypto review. So, I rewrote the whole thing,
trying to keep to the conventions introduced by the previous author, to
fix these cryptographic flaws.
It makes no sense to seed crypto/rng at boot time and then keep
using it like this, when in fact there's already get_random_bytes_wait,
which can ensure there's enough entropy and be a much more standard way
of generating keys. Since this sensitive material is being stored
untrusted, using ECB and no authentication is simply not okay at all. I
find it surprising and a bit horrifying that this code even made it past
basic crypto review, which perhaps points to some larger issues. This
patch moves from using AES-ECB to using AES-GCM. Since keys are uniquely
generated each time, we can set the nonce to zero. There was also a race
condition in which the same key would be reused at the same time in
different threads. A mutex fixes this issue now.
So, to summarize, this commit fixes the following vulnerabilities:
* Low entropy key generation, allowing an attacker to potentially
guess or predict keys.
* Unauthenticated encryption, allowing an attacker to modify the
cipher text in particular ways in order to manipulate the plaintext,
which is is even more frightening considering the next point.
* Use of ECB mode, allowing an attacker to trivially swap blocks or
compare identical plaintext blocks.
* Key re-use.
* Faulty memory zeroing.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: security@kernel.org
Cc: stable@vger.kernel.org
Error paths forgot to zero out sensitive material, so this patch changes
some kfrees into a kzfrees.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers3@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: security@kernel.org
Cc: stable@vger.kernel.org
has been pointing out constant problems. The changes have been going into
the stack tracer, but it has been discovered that the problem isn't
with the stack tracer itself, but it is with calling save_stack_trace()
from within the internals of RCU. The stack tracer is the one that
can trigger the issue the easiest, but examining the problem further,
it could also happen from a WARN() in the wrong place, or even if
an NMI happened in this area and it did an rcu_read_lock().
The critical area is where RCU is not watching. Which can happen while
going to and from idle, or bringing up or taking down a CPU.
The final fix was to put the protection in kernel_text_address() as it
is the one that requires RCU to be watching while doing the stack trace.
To make this work properly, Paul had to allow rcu_irq_enter() happen after
rcu_nmi_enter(). This should have been done anyway, since an NMI can
page fault (reading vmalloc area), and a page fault triggers rcu_irq_enter().
One patch is just a consolidation of code so that the fix only needed
to be done in one location.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEQEw9Eu0DdyUUkuUUybkF8mrZjcsFAlnGyXoUHHJvc3RlZHRA
Z29vZG1pcy5vcmcACgkQybkF8mrZjctKtwf8CeKGqOdlqkZEafIpWaIASXmAVMO/
WE+hQK+rCydWFvzADgb/rOmsR0ou8WGEXcuUPxVxmvMyqhKhZ6AU1hE/7Y8P0pMq
F4bev+j3lAJC65ezFAh+ZQcIjaRIH4MFVPsUTaibSPSN7xziMNIpbf9VOVfpUm8A
jf9p6YAmyhFVi6DstCc29SWnywEVwC2ZWRVKRPXKry8/dPxjfVcLclGX680Eqi9I
EnYaOdC/mGbtvHPOUSs/P0cfxExHmyEErQHeOV8FPymj6KJ6+KoYIiELNlTHUBj/
eeKzrHc/b3j+lz0RPlA8WxYmpmEm4SE5cV3vRebdBNUBrABSN1RxeOozyQ==
=1KkS
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Stack tracing and RCU has been having issues with each other and
lockdep has been pointing out constant problems.
The changes have been going into the stack tracer, but it has been
discovered that the problem isn't with the stack tracer itself, but it
is with calling save_stack_trace() from within the internals of RCU.
The stack tracer is the one that can trigger the issue the easiest,
but examining the problem further, it could also happen from a WARN()
in the wrong place, or even if an NMI happened in this area and it did
an rcu_read_lock().
The critical area is where RCU is not watching. Which can happen while
going to and from idle, or bringing up or taking down a CPU.
The final fix was to put the protection in kernel_text_address() as it
is the one that requires RCU to be watching while doing the stack
trace.
To make this work properly, Paul had to allow rcu_irq_enter() happen
after rcu_nmi_enter(). This should have been done anyway, since an NMI
can page fault (reading vmalloc area), and a page fault triggers
rcu_irq_enter().
One patch is just a consolidation of code so that the fix only needed
to be done in one location"
* tag 'trace-v4.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove RCU work arounds from stack tracer
extable: Enable RCU if it is not watching in kernel_text_address()
extable: Consolidate *kernel_text_address() functions
rcu: Allow for page faults in NMI handlers
Add a sysfs file to one-time fail a specific state. This can be used
to test the state rollback code paths.
Something like this (hotplug-up.sh):
#!/bin/bash
echo 0 > /debug/sched_debug
echo 1 > /debug/tracing/events/cpuhp/enable
ALL_STATES=`cat /sys/devices/system/cpu/hotplug/states | cut -d':' -f1`
STATES=${1:-$ALL_STATES}
for state in $STATES
do
echo 0 > /sys/devices/system/cpu/cpu1/online
echo 0 > /debug/tracing/trace
echo Fail state: $state
echo $state > /sys/devices/system/cpu/cpu1/hotplug/fail
cat /sys/devices/system/cpu/cpu1/hotplug/fail
echo 1 > /sys/devices/system/cpu/cpu1/online
cat /debug/tracing/trace > hotfail-${state}.trace
sleep 1
done
Can be used to test for all possible rollback (barring multi-instance)
scenarios on CPU-up, CPU-down is a trivial modification of the above.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Cc: max.byungchul.park@gmail.com
Link: https://lkml.kernel.org/r/20170920170546.972581715@infradead.org
With lockdep-crossrelease we get deadlock reports that span cpu-up and
cpu-down chains. Such deadlocks cannot possibly happen because cpu-up
and cpu-down are globally serialized.
takedown_cpu()
irq_lock_sparse()
wait_for_completion(&st->done)
cpuhp_thread_fun
cpuhp_up_callback
cpuhp_invoke_callback
irq_affinity_online_cpu
irq_local_spare()
irq_unlock_sparse()
complete(&st->done)
Now that we have consistent AP state, we can trivially separate the
AP completion between up and down using st->bringup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: max.byungchul.park@gmail.com
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20170920170546.872472799@infradead.org
With lockdep-crossrelease we get deadlock reports that span cpu-up and
cpu-down chains. Such deadlocks cannot possibly happen because cpu-up
and cpu-down are globally serialized.
CPU0 CPU1 CPU2
cpuhp_up_callbacks: takedown_cpu: cpuhp_thread_fun:
cpuhp_state
irq_lock_sparse()
irq_lock_sparse()
wait_for_completion()
cpuhp_state
complete()
Now that we have consistent AP state, we can trivially separate the
AP-work class between up and down using st->bringup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: max.byungchul.park@gmail.com
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20170920170546.922524234@infradead.org
While the generic callback functions have an 'int' return and thus
appear to be allowed to return error, this is not true for all states.
Specifically, what used to be STARTING/DYING are ran with IRQs
disabled from critical parts of CPU bringup/teardown and are not
allowed to fail. Add WARNs to enforce this rule.
But since some callbacks are indeed allowed to fail, we have the
situation where a state-machine rollback encounters a failure, in this
case we're stuck, we can't go forward and we can't go back. Also add a
WARN for that case.
AFAICT this is a fundamental 'problem' with no real obvious solution.
We want the 'prepare' callbacks to allow failure on either up or down.
Typically on prepare-up this would be things like -ENOMEM from
resource allocations, and the typical usage in prepare-down would be
something like -EBUSY to avoid CPUs being taken away.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Cc: max.byungchul.park@gmail.com
Link: https://lkml.kernel.org/r/20170920170546.819539119@infradead.org
There is currently no explicit state change on rollback. That is,
st->bringup, st->rollback and st->target are not consistent when doing
the rollback.
Rework the AP state handling to be more coherent. This does mean we
have to do a second AP kick-and-wait for rollback, but since rollback
is the slow path of a slowpath, this really should not matter.
Take this opportunity to simplify the AP thread function to only run a
single callback per invocation. This unifies the three single/up/down
modes is supports. The looping it used to do for up/down are achieved
by retaining should_run and relying on the main smpboot_thread_fn()
loop.
(I have most of a patch that does the same for the BP state handling,
but that's not critical and gets a little complicated because
CPUHP_BRINGUP_CPU does the AP handoff from a callback, which gets
recursive @st usage, I still have de-fugly that.)
[ tglx: Move cpuhp_down_callbacks() et al. into the HOTPLUG_CPU section to
avoid gcc complaining about unused functions. Make the HOTPLUG_CPU
one piece instead of having two consecutive ifdef sections of the
same type. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Cc: max.byungchul.park@gmail.com
Link: https://lkml.kernel.org/r/20170920170546.769658088@infradead.org
Currently the rollback of multi-instance states is handled inside
cpuhp_invoke_callback(). The problem is that when we want to allow an
explicit state change for rollback, we need to return from the
function without doing the rollback.
Change cpuhp_invoke_callback() to optionally return the multi-instance
state, such that rollback can be done from a subsequent call.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bigeasy@linutronix.de
Cc: efault@gmx.de
Cc: rostedt@goodmis.org
Cc: max.byungchul.park@gmail.com
Link: https://lkml.kernel.org/r/20170920170546.720361181@infradead.org
Add myself as a maintainer to support existing SoCs and push forward
following MediaTek PMICs with LEDs to reuse the driver.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
ChunYu found a kernel crash by syzkaller:
[ 651.617875] kasan: CONFIG_KASAN_INLINE enabled
[ 651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access
[ 651.618731] general protection fault: 0000 [#1] SMP KASAN
[ 651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32
[ 651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 651.622309] task: ffff880117780000 task.stack: ffff8800a3188000
[ 651.622762] RIP: 0010:skb_release_data+0x26c/0x590
[...]
[ 651.627260] Call Trace:
[ 651.629156] skb_release_all+0x4f/0x60
[ 651.629450] consume_skb+0x1a5/0x600
[ 651.630705] netlink_unicast+0x505/0x720
[ 651.632345] netlink_sendmsg+0xab2/0xe70
[ 651.633704] sock_sendmsg+0xcf/0x110
[ 651.633942] ___sys_sendmsg+0x833/0x980
[ 651.637117] __sys_sendmsg+0xf3/0x240
[ 651.638820] SyS_sendmsg+0x32/0x50
[ 651.639048] entry_SYSCALL_64_fastpath+0x1f/0xc2
It's caused by skb_shared_info at the end of sk_buff was overwritten by
ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx.
During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh),
ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a
new value to skb_shinfo(SKB)->nr_frags by ev->type.
This patch is to fix it by checking nlh->nlmsg_len properly there to
avoid over accessing sk_buff.
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 7778c4b27c ("irqchip: mips-gic: Use pcpu_masks to avoid reading
GIC_SH_MASK*") adjusted the way we handle masking interrupts to set &
clear the interrupt's bit in each pcpu_mask. This allows us to avoid
needing to read the GIC mask registers and perform a bitwise and of
their values with the pending & pcpu_masks.
Unfortunately this didn't quite work for IPIs, which were mapped to a
particular CPU/VP during initialisation but never set the affinity or
effective_affinity fields of their struct irq_desc. This led to them
losing their affinity when gic_unmask_irq() was called for them, and
they'd all become affine to cpu0.
Fix this by:
1) Setting the effective affinity of interrupts in
gic_shared_irq_domain_map(), which is where we actually map an
interrupt to a CPU/VP. This ensures that the effective affinity mask
is always valid, not just after explicitly setting affinity.
2) Using an interrupt's effective affinity when unmasking it, which
prevents gic_unmask_irq() from unintentionally changing which
pcpu_mask includes an interrupt.
Fixes: 7778c4b27c ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: https://lkml.kernel.org/r/20170922062440.23701-3-paul.burton@imgtec.com
The MIPS GIC driver is incorrectly using __fls to shift registers,
intending to shift to the least significant bit of a value based upon
its mask but instead shifting off all but the value's top bit. It should
actually be using __ffs to shift to the first, not last, bit of the
value.
Apparently the system I used when testing commit 3680746abd
("irqchip: mips-gic: Convert remaining shared reg access to new
accessors") and commit b2b2e584ce ("irqchip: mips-gic: Clean up mti,
reserved-cpu-vectors handling") managed to work correctly despite this
issue, but not all systems do...
Fixes: 3680746abd ("irqchip: mips-gic: Convert remaining shared reg access to new accessors")
Fixes: b2b2e584ce ("irqchip: mips-gic: Clean up mti, reserved-cpu-vectors handling")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: https://lkml.kernel.org/r/20170922062440.23701-2-paul.burton@imgtec.com
Now that there are potentially long delays between when a remoteport or
targetport delete calls is made and when the callback occurs (dev_loss_tmo
timeout), no longer block in the delete routines and move the final nport
puts to the callbacks.
Moved the fcloop_nport_get/put/free routines to avoid forward declarations.
Ensure port_info structs used in registrations are nulled in case fields
are not set (ex: devloss_tmo values).
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Comments were incorrect:
- defer_rcv was in host port template. moved to target port template
- Added Mandatory statements for target port template items
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When searching for queue id's ensure they are within the expected range.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid calling the put routine, as it may traverse to free routines while
holding the target lock.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By calling nvme_stop_ctrl on a already failed controller will wait for the
scan work to complete (only by identify timeout expiration which is 60
seconds). This is unnecessary when we already know that the controller has
failed.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we failed to transition to state LIVE after a successful reconnect,
then controller deletion already started. In this case there is no
point moving forward with reconnect.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
async_event_work might race as it is executed from two different
workqueues at the moment.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix bug in sqhd patch.
It wasn't the sq that was at risk. In the case where the admin queue
connect command fails, the sq->size field is not set. Therefore, this
becomes a divide by zero error.
Add a quick check to bypass under this failure condition.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The switch to rhashtables (commit 88ffbf3e03) broke the debugfs glock
dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a
single buffer: the right function for restarting an rhashtable iteration
from the beginning of the hash table is rhashtable_walk_enter;
rhashtable_walk_stop + rhashtable_walk_start will just resume from the
current position.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
When timer_create() fails on a bootime or realtime clock, setup_timer()
returns 0 as if timer has been set. Callers wait forever for the timer
to expire.
This hang is seen on a system that doesn't have support for:
CLOCK_REALTIME_ALARM ABSTIME missing CAP_WAKE_ALARM? : [UNSUPPORTED]
Test hangs waiting for a timer that hasn't been set to expire. Fix
setup_timer() to return 1, add handling in callers to detect the
unsupported case and return 0 without waiting to not fail the test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
do_timer_oneshot() uses select() as a timer with FD_SETSIZE and readfs
is cleared with FD_ZERO without FD_SET.
When stdout and stderr are redirected, the test hangs in select forever.
Fix the problem calling select() with readfds empty and nfds zero. This
is sufficient for using select() for timer.
With this fix "./set-timer-lat > /dev/null 2>&1" no longer hangs.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
to fix the following issue:
------------------
TAP version 13
selftests: run_tests.sh
========================================
selftests: Warning: file run_tests.sh is not executable, correct this.
not ok 1..1 selftests: run_tests.sh [FAIL]
------------------
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The 2.26 release of glibc changed how siginfo_t is defined, and the earlier
work-around to using the kernel definition are no longer needed. The old
way needs to stay around for a while, though.
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets:
for DIR in functional; do \
BUILD_TARGET=./tools/testing/selftests/futex/$DIR; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $DIR all;\
done
./tools/testing/selftests/futex/run.sh
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Ingo Molnar
Hannes Reinecke
Linus Torvalds
Colin Ian King
Kenjiro Nakayama
Eryu Guan
Helge Deller
Darrick J. Wong
Al Viro
Nicolai Stange
Suniel Mahesh
Hannes Reinecke
Viresh Kumar
Jason A. Donenfeld
Peter Zijlstra
Sean Wang
Xin Long
Masahiro Yamada
Paul Burton
James Smart
Sagi Grimberg
Andreas Gruenbacher
Shuah Khan
Li Zhijian
Kees Cook