Commit Graph

118 Commits

Author SHA1 Message Date
Steven Rostedt (Red Hat) 9d9add34ec tracing: Have function_graph use trace_seq_has_overflowed()
Instead of doing individual checks all over the place that makes the code
very messy. Just check trace_seq_has_overflowed() at the end or in
strategic places.

This makes the code much cleaner and also helps with getting closer
to removing the return values of trace_seq_printf() and friends.

Link: http://lkml.kernel.org/r/20141114011410.987913836@goodmis.org

Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-19 15:25:42 -05:00
Byungchul Park 4526d0676a function_graph: Fix micro seconds notations
Usually, "msecs" notation means milli-seconds, and "usecs" notation
means micro-seconds. Since the unit used in the code is micro-seconds,
the notation should be replaced from msecs to usecs.

Link: http://lkml.kernel.org/r/1415171926-9782-2-git-send-email-byungchul.park@lge.com

Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-14 07:56:03 -05:00
Daniel Bristot de Oliveira 678f845ed0 ftrace-graph: show latency-format on print_graph_irq()
On the function_graph tracer, the print_graph_irq() function prints a
trace line with the flag ==========> on an irq handler entry, and the
flag <========== on an irq handler return.

But when the latency-format is enable, it is not printing the
latency-format flags, causing the following error in the trace output:

 0)   ==========> |
 0)  d...              |  smp_apic_timer_interrupt() {

This patch fixes this issue by printing the latency-format flags when
it is enable.

Link: http://lkml.kernel.org/r/7c2e226dac20c940b6242178fab7f0e3c9b5ce58.1415233316.git.bristot@redhat.com

Reviewed-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-14 07:56:02 -05:00
Rasmus Villemoes 1177e43641 trace: Replace single-character seq_puts with seq_putc
Printing a single character to a seqfile might as well be done with
seq_putc instead of seq_puts; this avoids a strlen() call and a memory
access. It also shaves another few bytes off the generated code.

Link: http://lkml.kernel.org/r/1415479332-25944-4-git-send-email-linux@rasmusvillemoes.dk

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-14 07:55:55 -05:00
Rasmus Villemoes fa6f0cc751 tracing: Replace seq_printf by simpler equivalents
Using seq_printf to print a simple string or a single character is a
lot more expensive than it needs to be, since seq_puts and seq_putc
exist.

These patches do

  seq_printf(m, s) -> seq_puts(m, s)
  seq_printf(m, "%s", s) -> seq_puts(m, s)
  seq_printf(m, "%c", c) -> seq_putc(m, c)

Subsequent patches will simplify further.

Link: http://lkml.kernel.org/r/1415479332-25944-2-git-send-email-linux@rasmusvillemoes.dk

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-13 21:32:19 -05:00
Steven Rostedt (Red Hat) ba1afef6a4 tracing: Convert local function_graph functions to static
Local functions should be static.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-18 21:16:06 -04:00
Stanislav Fomichev 6508fa761c tracing: let user specify tracing_thresh after selecting function_graph
Currently, tracing_thresh works only if we specify it before selecting
function_graph tracer. If we do the opposite, tracing_thresh will change
it's value, but it will not be applied.
To fix it, we add update_thresh callback which is called whenever
tracing_thresh is updated and for function_graph tracer we register
handler which reinitializes tracer depending on tracing_thresh.

Link: http://lkml.kernel.org/p/20140718111727.GA3206@stfomichev-desktop.yandex.net

Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-18 15:48:52 -04:00
Steven Rostedt (Red Hat) 545d47b8f3 ftrace-graph: Remove usage of ftrace_stop() in ftrace_graph_stop()
All archs now use ftrace_graph_is_dead() to stop function graph
tracing. Remove the usage of ftrace_stop() as that is no longer
needed.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-18 13:56:58 -04:00
Steven Rostedt (Red Hat) 1b2f121c14 ftrace-graph: Remove dependency of ftrace_stop() from ftrace_graph_stop()
ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing.

A new function is created called ftrace_graph_is_dead(). This is called
in strategic paths to prevent function graph from doing more harm and
allowing at least a warning to be printed before the system crashes.

NOTE: ftrace_stop() is still used until all the archs are converted over
to use ftrace_graph_is_dead(). After that, ftrace_stop() will be removed.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-17 09:45:07 -04:00
Robert Elliott 607e3a2920 tracing: Add funcgraph_tail option to print function name after closing braces
In the function-graph tracer, add a funcgraph_tail option
to print the function name on all } lines, not just
functions whose first line is no longer in the trace
buffer.

If a function calls other traced functions, its total
time appears on its } line.  This change allows grep
to be used to determine the function for which the
line corresponds.

Update Documentation/trace/ftrace.txt to describe
this new option.

Link: http://lkml.kernel.org/p/20140520221041.8359.6782.stgit@beardog.cce.hp.com

Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-20 23:29:32 -04:00
Robert Elliott ccdb594653 tracing: Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
in trace_functions_graph.c that are already in
trace.h.

Add TRACE_GRAPH_PRINT_IRQS to trace.h, which is
the only one that is missing.

Link: http://lkml.kernel.org/p/20140520221031.8359.24733.stgit@beardog.cce.hp.com

Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-20 23:28:34 -04:00
Steven Rostedt (Red Hat) b1169cc69b tracing: Remove mock up poll wait function
Now that the ring buffer has a built in way to wake up readers
when there's data, using irq_work such that it is safe to do it
in any context. But it was still using the old "poor man's"
wait polling that checks every 1/10 of a second to see if it
should wake up a waiter. This makes the latency for a wake up
excruciatingly long. No need to do that anymore.

Completely remove the different wait_poll types from the tracers
and have them all use the default one now.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-30 08:40:05 -04:00
Steven Rostedt (Red Hat) 8c1a49aedb tracing: Pass trace_array to set_flag callback
As options (flags) may affect instances instead of being global
the set_flag() callbacks need to receive the trace_array descriptor
of the instance they will be modifying.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-02-20 12:13:07 -05:00
Steven Rostedt (Red Hat) 6fc84ea70e tracing: Do not use signed enums with unsigned long long in fgragh output
The duration field of print_graph_duration() can also be used
to do the space filling by passing an enum in it:

  DURATION_FILL_FULL
  DURATION_FILL_START
  DURATION_FILL_END

The problem is that these are enums and defined as negative,
but the duration field is unsigned long long. Most archs are
fine with this but blackfin fails to compile because of it:

kernel/built-in.o: In function `print_graph_duration':
kernel/trace/trace_functions_graph.c:782: undefined reference to `__ucmpdi2'

Overloading a unsigned long long with an signed enum is just
bad in principle. We can accomplish the same thing by using
part of the flags field instead.

Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-11-06 15:26:56 -05:00
Tom Zanussi f306cc82a9 tracing: Update event filters for multibuffer
The trace event filters are still tied to event calls rather than
event files, which means you don't get what you'd expect when using
filters in the multibuffer case:

Before:

  # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # mkdir /sys/kernel/debug/tracing/instances/test1
  # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 2048
  # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  bytes_alloc > 2048

Setting the filter in tracing/instances/test1/events shouldn't affect
the same event in tracing/events as it does above.

After:

  # echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # mkdir /sys/kernel/debug/tracing/instances/test1
  # echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  # cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
  bytes_alloc > 8192
  # cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
  bytes_alloc > 2048

We'd like to just move the filter directly from ftrace_event_call to
ftrace_event_file, but there are a couple cases that don't yet have
multibuffer support and therefore have to continue using the current
event_call-based filters.  For those cases, a new USE_CALL_FILTER bit
is added to the event_call flags, whose main purpose is to keep the
old behavior for those cases until they can be updated with
multibuffer support; at that point, the USE_CALL_FILTER flag (and the
new associated call_filter_check_discard() function) can go away.

The multibuffer support also made filter_current_check_discard()
redundant, so this change removes that function as well and replaces
it with filter_check_discard() (or call_filter_check_discard() as
appropriate).

Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-11-05 16:50:20 -05:00
Namhyung Kim 29ad23b004 ftrace: Add set_graph_notrace filter
The set_graph_notrace filter is analogous to set_ftrace_notrace and
can be used for eliminating uninteresting part of function graph trace
output.  It also works with set_graph_function nicely.

  # cd /sys/kernel/debug/tracing/
  # echo do_page_fault > set_graph_function
  # perf ftrace live true
   2)               |  do_page_fault() {
   2)               |    __do_page_fault() {
   2)   0.381 us    |      down_read_trylock();
   2)   0.055 us    |      __might_sleep();
   2)   0.696 us    |      find_vma();
   2)               |      handle_mm_fault() {
   2)               |        handle_pte_fault() {
   2)               |          __do_fault() {
   2)               |            filemap_fault() {
   2)               |              find_get_page() {
   2)   0.033 us    |                __rcu_read_lock();
   2)   0.035 us    |                __rcu_read_unlock();
   2)   1.696 us    |              }
   2)   0.031 us    |              __might_sleep();
   2)   2.831 us    |            }
   2)               |            _raw_spin_lock() {
   2)   0.046 us    |              add_preempt_count();
   2)   0.841 us    |            }
   2)   0.033 us    |            page_add_file_rmap();
   2)               |            _raw_spin_unlock() {
   2)   0.057 us    |              sub_preempt_count();
   2)   0.568 us    |            }
   2)               |            unlock_page() {
   2)   0.084 us    |              page_waitqueue();
   2)   0.126 us    |              __wake_up_bit();
   2)   1.117 us    |            }
   2)   7.729 us    |          }
   2)   8.397 us    |        }
   2)   8.956 us    |      }
   2)   0.085 us    |      up_read();
   2) + 12.745 us   |    }
   2) + 13.401 us   |  }
  ...

  # echo handle_mm_fault > set_graph_notrace
  # perf ftrace live true
   1)               |  do_page_fault() {
   1)               |    __do_page_fault() {
   1)   0.205 us    |      down_read_trylock();
   1)   0.041 us    |      __might_sleep();
   1)   0.344 us    |      find_vma();
   1)   0.069 us    |      up_read();
   1)   4.692 us    |    }
   1)   5.311 us    |  }
  ...

Link: http://lkml.kernel.org/r/1381739066-7531-5-git-send-email-namhyung@kernel.org

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-10-18 22:23:16 -04:00
Steven Rostedt (Red Hat) 8f76899339 tracing: Add ref_data to function and fgraph tracer structs
The selftest for function and function graph tracers are defined as
__init, as they are only executed at boot up. The "tracer" structs
that are associated to those tracers are not setup as __init as they
are used after boot. To stop mismatch warnings, those structures
need to be annotated with __ref_data.

Currently, the tracer structures are defined to __read_mostly, as they
do not really change. But in the future they should be converted to
consts, but that will take a little work because they have a "next"
pointer that gets updated when they are registered. That will have to
wait till the next major release.

Link: http://lkml.kernel.org/r/1373596735.17876.84.camel@gandalf.local.home

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-18 21:31:31 -04:00
zhangwei(Jovi) 146c3442f2 tracing: Use trace_seq_puts()/trace_seq_putc() where possible
For string without format specifiers, use trace_seq_puts()
or trace_seq_putc().

Link: http://lkml.kernel.org/r/51E3B3AC.1000605@huawei.com

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ fixed a trace_seq_putc(s, " ") to trace_seq_putc(s, ' ') ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-18 21:30:36 -04:00
Steven Rostedt (Red Hat) 12883efb67 tracing: Consolidate max_tr into main trace_array structure
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.

The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.

This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.

The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:35:40 -04:00
Steven Rostedt a7603ff4b5 tracing: Replace the static global per_cpu arrays with allocated per_cpu
The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 00:34:43 -04:00
Steven Rostedt (Red Hat) 03274a3ffb tracing/fgraph: Adjust fgraph depth before calling trace return callback
While debugging the virtual cputime with the function graph tracer
with a max_depth of 1 (most common use of the max_depth so far),
I found that I was missing kernel execution because of a race condition.

The code for the return side of the function has a slight race:

	ftrace_pop_return_trace(&trace, &ret, frame_pointer);
	trace.rettime = trace_clock_local();
	ftrace_graph_return(&trace);
	barrier();
	current->curr_ret_stack--;

The ftrace_pop_return_trace() initializes the trace structure for
the callback. The ftrace_graph_return() uses the trace structure
for its own use as that structure is on the stack and is local
to this function. Then the curr_ret_stack is decremented which
is what the trace.depth is set to.

If an interrupt comes in after the ftrace_graph_return() but
before the curr_ret_stack, then the called function will get
a depth of 2. If max_depth is set to 1 this function will be
ignored.

The problem is that the trace has already been called, and the
timestamp for that trace will not reflect the time the function
was about to re-enter userspace. Calls to the interrupt will not
be traced because the max_depth has prevented this.

To solve this issue, the ftrace_graph_return() can safely be
moved after the current->curr_ret_stack has been updated.
This way the timestamp for the return callback will reflect
the actual time.

If an interrupt comes in after the curr_ret_stack update and
ftrace_graph_return(), it will be traced. It may look a little
confusing to see it within the other function, but at least
it will not be lost.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-29 17:30:31 -05:00
Steven Rostedt 8741db532e tracing/fgraph: Add max_graph_depth to limit function_graph depth
Add the file max_graph_depth to the debug tracing directory that lets
the user define the depth of the function graph.

A very useful operation is to set the depth to 1. Then it traces only
the first function that is called when entering the kernel. This can
be used to determine what system operations interrupt a process.

For example, to work on NOHZ processes (single tasks running without
a timer tick), if any interrupt goes off and preempts that task, this
code will show it happening.

  # cd /sys/kernel/debug/tracing
  # echo 1 > max_graph_depth
  # echo function_graph > current_tracer
  # cat per_cpu/cpu/<cpu-of-process>/trace

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-21 13:22:34 -05:00
Steven Rostedt 7ffbd48d5c tracing: Cache comms only after an event occurred
Whenever an event is registered, the comm of tasks are saved at
every task switch instead of saving them at every event. But if
an event isn't executed much, the comm cache will be filled up
by tasks that did not record the event and you lose out on the comms
that did.

Here's an example, if you enable the following events:

echo 1 > /debug/tracing/events/kvm/kvm_cr/enable
echo 1 > /debug/tracing/events/net/net_dev_xmit/enable

Note, there's no kvm running on this machine so the first event will
never be triggered, but because it is enabled, the storing of comms
will continue. If we now disable the network event:

echo 0 > /debug/tracing/events/net/net_dev_xmit/enable

and look at the trace:

cat /debug/tracing/trace
            sshd-2672  [001] ..s2   375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
            sshd-2672  [001] ..s1   377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
            sshd-2672  [001] ..s2   377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
            sshd-2672  [001] ..s1   377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0

We see that process 2672 which triggered the events has the comm "sshd".
But if we run hackbench for a bit and look again:

cat /debug/tracing/trace
           <...>-2672  [001] ..s2   375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
           <...>-2672  [001] ..s1   377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
           <...>-2672  [001] ..s2   377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
           <...>-2672  [001] ..s1   377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0

The stored "sshd" comm has been flushed out and we get a useless "<...>".

But by only storing comms after a trace event occurred, we can run
hackbench all day and still get the same output.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-31 16:45:31 -04:00
Steven Rostedt 6f4156723c tracing: Allow tracers to start at core initcall
There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().

There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-31 16:45:24 -04:00
Steven Rostedt 781d062482 ftrace: Do not test frame pointers if -mfentry is used
The function graph has a test to check if the frame pointer is
corrupted, which can happen with various options of gcc with mcount.
But this is not an issue with -mfentry as -mfentry does not need nor use
frame pointers for function graph tracing.

Link: http://lkml.kernel.org/r/20120807194059.773895870@goodmis.org

Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-08-23 11:25:29 -04:00
Steven Rostedt 6d158a813e tracing: Remove NR_CPUS array from trace_iterator
Replace the NR_CPUS array of buffer_iter from the trace_iterator
with an allocated array. This will just create an array of
possible CPUS instead of the max number specified.

The use of NR_CPUS in that array caused allocation failures for
machines that were tight on memory. This did not cause any failures
to the system itself (no crashes), but caused unnecessary failures
for reading the trace files.

Added a helper function called 'trace_buffer_iter()' that returns
the buffer_iter item or NULL if it is not defined or the array was
not allocated. Some routines do not require the array
(tracing_open_pipe() for one).

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-28 13:52:15 -04:00
Steven Rostedt e4a3f541f0 tracing: Still trace filtered irq functions when irq trace is disabled
If a function is set to be traced by the set_graph_function, but the
option funcgraph-irqs is zero, and the traced function happens to be
called from a interrupt, it will not be traced.

The point of funcgraph-irqs is to not trace interrupts when we are
preempted by an irq, not to not trace functions we want to trace that
happen to be *in* a irq.

Luckily the current->trace_recursion element is perfect to add a flag
to help us be able to trace functions within an interrupt even when
we are not tracing interrupts that preempt the trace.

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-07 22:26:27 -04:00
Jiri Olsa 749230b06a tracing, function_graph: Add context-info support for function_graph tracer
The function_graph tracer does not follow global context-info option.
Adding TRACE_ITER_CONTEXT_INFO trace_flags check to enable it.

With following commands:
	# echo function_graph > ./current_tracer
	# echo 0 > options/context-info
	# cat trace

This is what it looked like before:
# tracer: function_graph
#
#     TIME        CPU  DURATION                  FUNCTION CALLS
#      |          |     |   |                     |   |   |   |
 1)   0.079 us    |          } /* __vma_link_rb */
 1)   0.056 us    |          copy_page_range();
 1)               |          security_vm_enough_memory() {
...

This is what it looks like now:
# tracer: function_graph
#
  } /* update_ts_time_stats */
  timekeeping_max_deferment();
...

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-6-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 22:48:49 -04:00
Jiri Olsa 199abfab40 tracing, function_graph: Remove lock-depth from latency trace
The lock_depth was removed in commit
e6e1e25 tracing: Remove lock_depth from event entry

Removing the lock_depth info from function_graph latency header.

With following commands:
	# echo function_graph > ./current_tracer
	# echo 1 > options/latency-format
	# cat trace

This is what it looked like before:
# tracer: function_graph
#
# function_graph latency trace v1.1.5 on 3.0.0-rc1-tip+
# --------------------------------------------------------------------
# latency: 0 us, #59756/311298, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
#    -----------------
#    | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
#    -----------------
#
#      _-----=> irqs-off
#     / _----=> need-resched
#    | / _---=> hardirq/softirq
#    || / _--=> preempt-depth
#    ||| / _-=> lock-depth
#    |||| /
# CPU|||||  DURATION                  FUNCTION CALLS
# |  |||||   |   |                     |   |   |   |
 0)  ....  0.068 us    |    } /* __rcu_read_unlock */
...

This is what it looks like now:
# tracer: function_graph
#
# function_graph latency trace v1.1.5 on 3.0.0-rc1-tip+
# --------------------------------------------------------------------
# latency: 0 us, #59747/1744610, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
#    -----------------
#    | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
#    -----------------
#
#      _-----=> irqs-off
#     / _----=> need-resched
#    | / _---=> hardirq/softirq
#    || / _--=> preempt-depth
#    ||| /
# CPU||||  DURATION                  FUNCTION CALLS
# |  ||||   |   |                     |   |   |   |
 0)  ..s.  1.641 us    |  } /* __rcu_process_callbacks */
...

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-5-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 22:48:49 -04:00
Jiri Olsa ffeb80fc30 tracing, function_graph: Merge overhead and duration display functions
Functions print_graph_overhead() and print_graph_duration() displays
data for one field - DURATION.

I merged them into single function print_graph_duration(),
and added a way to display the empty parts of the field.

This way the print_graph_irq() function can use this column to display
the IRQ signs if needed and the DURATION field details stays inside
the print_graph_duration() function.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-3-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 22:48:47 -04:00
Jiri Olsa 321e68b095 tracing, function_graph: Remove dependency of abstime and duration fields on latency
The display of absolute time and duration fields is based on the
latency field. This was added during the irqsoff/wakeup tracers
graph support changes.

It's causing confusion in what fields will be displayed for the
function_graph tracer itself. So I'm removing this depency, and
adding absolute time and duration fields to the preemptirqsoff
preemptoff irqsoff wakeup tracers.

With following commands:
	# echo function_graph > ./current_tracer
	# cat trace

This is what it looked like before:
# tracer: function_graph
#
#     TIME        CPU  DURATION                  FUNCTION CALLS
#      |          |     |   |                     |   |   |   |
 0)   0.068 us    |          } /* page_add_file_rmap */
 0)               |          _raw_spin_unlock() {
...

This is what it looks like now:
# tracer: function_graph
#
# CPU  DURATION                  FUNCTION CALLS
# |     |   |                     |   |   |   |
 0)   0.068 us    |                } /* add_preempt_count */
 0)   0.993 us    |              } /* vfsmount_lock_local_lock */
...

For preemptirqsoff preemptoff irqsoff wakeup tracers,
this is what it looked like before:
SNIP
#                       _-----=> irqs-off
#                      / _----=> need-resched
#                     | / _---=> hardirq/softirq
#                     || / _--=> preempt-depth
#                     ||| / _-=> lock-depth
#                     |||| /
# CPU  TASK/PID       |||||  DURATION                  FUNCTION CALLS
# |     |    |        |||||   |   |                     |   |   |   |
 1)    <idle>-0    |  d..1  0.000 us    |  acpi_idle_enter_simple();
...

This is what it looks like now:
SNIP
#
#                                       _-----=> irqs-off
#                                      / _----=> need-resched
#                                     | / _---=> hardirq/softirq
#                                     || / _--=> preempt-depth
#                                     ||| /
#     TIME        CPU  TASK/PID       ||||  DURATION                  FUNCTION CALLS
#      |          |     |    |        ||||   |   |                     |   |   |   |
   19.847735 |   1)    <idle>-0    |  d..1  0.000 us    |  acpi_idle_enter_simple();
...

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-2-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-14 22:48:47 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Steven Rostedt 78c89ba121 tracing: Remove parent recording in latency tracer graph options
Even though the parent is recorded with the normal function tracing
of the latency tracers (irqsoff and wakeup), the function graph
recording is bogus.

This is due to the function graph messing with the return stack.
The latency tracers pass in as the parent CALLER_ADDR0, which
works fine for plain function tracing. But this causes bogus output
with the graph tracer:

 3)    <idle>-0    |  d.s3.  0.000 us    |  return_to_handler();
 3)    <idle>-0    |  d.s3.  0.000 us    |  _raw_spin_unlock_irqrestore();
 3)    <idle>-0    |  d.s3.  0.000 us    |  return_to_handler();
 3)    <idle>-0    |  d.s3.  0.000 us    |  trace_hardirqs_on();

The "return_to_handle()" call is the trampoline of the
function graph tracer, and is meaningless in this context.

Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18 10:53:38 -04:00
Jiri Olsa 0a772620a2 tracing: Make graph related irqs/preemptsoff functions global
Move trace_graph_function() and print_graph_headers_flags() functions
to the trace_function_graph.c to be globaly available.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18 10:53:28 -04:00
Jiri Olsa a9d61173dc tracing: Add proper check for irq_depth routines
The check_irq_entry and check_irq_return could be called
from graph event context. In such case there's no graph
private data allocated. Adding checks to handle this case.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20100924154102.GB1818@jolsa.brq.redhat.com>

[ Fixed some grammar in the comments ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-18 10:53:25 -04:00
Borislav Petkov 14cae9bd2f tracing: Fix function-graph build warning on 32-bit
Fix

kernel/trace/trace_functions_graph.c: In function ‘trace_print_graph_duration’:
kernel/trace/trace_functions_graph.c:652: warning: comparison of distinct pointer types lacks a cast

when building 36-rc6 on a 32-bit due to the strict type check failing
in the min() macro.

Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100929080823.GA13595@liondog.tnic>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-10-13 17:47:53 +02:00
Steven Rostedt b304d0441a tracing: Do not trace in irq when funcgraph-irq option is zero
When the function graph tracer funcgraph-irq option is zero, disable
tracing in IRQs. This makes the option have two effects.

1) When reading the trace file, do not display the functions that
   happen in interrupt context (when detected)

2) [*new*] When recording a trace, skip those that are detected
   to be in interrupt by the 'in_irq()' function

Note, in_irq() is updated at irq_enter() and irq_exit(). There are
still functions that are recorded by the function graph tracer that
is in interrupt context but outside the irq_enter/exit() routines.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 20:18:07 -04:00
Jiri Olsa 2bd16212b8 tracing: Add funcgraph-irq option for function graph tracer.
It's handy to be able to disable the irq related output
and not to have to jump over each irq related code, when
you have no interrest in it.

The option is by default enabled, so there's no change to
current behaviour. It affects only the final output, so all
the irq related data stay in the ring buffer.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20100907145344.GC1912@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-14 20:18:07 -04:00
Ingo Molnar c8710ad389 Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core 2010-08-19 12:48:09 +02:00
Namhyung Kim 6016ee13db perf, tracing: add missing __percpu markups
ftrace_event_call->perf_events, perf_trace_buf,
fgraph_data->cpu_data and some local variables are percpu pointers
missing __percpu markups. Add them.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1281498479-28551-1-git-send-email-namhyung@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-08-19 01:33:05 +02:00
Steven Rostedt d244b6bd41 Merge branch 'tip/perf/urgent-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into trace/tip/perf/urgent-4
Conflicts:
	kernel/trace/trace_events.c

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-08-16 11:17:30 -04:00
Shaohua Li 575570f027 tracing: Fix an unallocated memory access in function_graph
With CONFIG_DEBUG_PAGEALLOC, I observed an unallocated memory access in
function_graph trace. It appears we find a small size entry in ring buffer,
but we access it as a big size entry. The access overflows the page size
and touches an unallocated page.

Cc: <stable@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <1280217994.32400.76.camel@sli10-desk.sh.intel.com>
[ Added a comment to explain the problem - SDR ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-08-06 12:19:15 -04:00
Chase Douglas d62f85d1e2 tracing/function-graph: Use correct string size for snprintf
The nsecs_str string is a local variable defined as:

char nsecs_str[5];

It is possible for the snprintf call to use a size value larger than the
size of the string. This should not cause a buffer overrun as it is
written now due to the value for the string format "%03lu" can not be
larger than 1000. However, this change makes it correct. By making the
size correct we guard against potential future changes that could actually
cause a buffer overrun.

Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
LKML-Reference: <1276619355-18116-1-git-send-email-chase.douglas@canonical.com>

[ added 'UL' to number 8 to fix gcc warning comparing it to sizeof() ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-28 21:11:39 -04:00
Steven Rostedt a9a5776380 tracing: Allow events to share their print functions
Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.

The event itself is now passed to the print function to let the print
function know what kind of event it should print.

This opens the door to consolidating the way several events print
their output.

   text	   data	    bss	    dec	    hex	filename
4913961	1088356	 861512	6863829	 68bbd5	vmlinux.orig
4900382	1048964	 861512	6810858	 67ecea	vmlinux.init
4900446	1049028	 861512	6810986	 67ed6a	vmlinux.preprint

This change slightly increases the size but is needed for the next change.

v3: Fix the branch tracer events to handle this change.

v2: Fix the new function graph tracer event calls to handle this change.

Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-14 14:20:32 -04:00
Jiri Olsa 62b915f106 tracing: Add graph output support for irqsoff tracer
Add function graph output to irqsoff tracer.

The graph output is enabled by setting new 'display-graph' trace option.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-27 12:36:53 -04:00
Jiri Olsa d7a8d9e907 tracing: Have graph flags passed in to ouput functions
Let the function graph tracer have custom flags passed to its
output functions.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-26 17:30:18 -04:00
Jiri Olsa 9106b69382 tracing: Add ftrace events for graph tracer
Add ftrace events for graph tracer, so the graph output could be shared
with other tracers.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-2-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-26 16:55:08 -04:00
Ingo Molnar c1ab9cab75 Merge branch 'linus' into tracing/core
Conflicts:
	include/linux/module.h
	kernel/module.c

Semantic conflict:
	include/trace/events/module.h

Merge reason: Resolve the conflict with upstream commit 5fbfb18 ("Fix up
              possibly racy module refcounting")

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-08 10:18:47 +02:00
Steven Rostedt 66a8cb95ed ring-buffer: Add place holder recording of dropped events
Currently, when the ring buffer drops events, it does not record
the fact that it did so. It does inform the writer that the event
was dropped by returning a NULL event, but it does not put in any
place holder where the event was dropped.

This is not a trivial thing to add because the ring buffer mostly
runs in overwrite (flight recorder) mode. That is, when the ring
buffer is full, new data will overwrite old data.

In a produce/consumer mode, where new data is simply dropped when
the ring buffer is full, it is trivial to add the placeholder
for dropped events. When there's more room to write new data, then
a special event can be added to notify the reader about the dropped
events.

But in overwrite mode, any new write can overwrite events. A place
holder can not be inserted into the ring buffer since there never
may be room. A reader could also come in at anytime and miss the
placeholder.

Luckily, the way the ring buffer works, the read side can find out
if events were lost or not, and how many events. Everytime a write
takes place, if it overwrites the header page (the next read) it
updates a "overrun" variable that keeps track of the number of
lost events. When a reader swaps out a page from the ring buffer,
it can record this number, perfom the swap, and then check to
see if the number changed, and take the diff if it has, which would be
the number of events dropped. This can be stored by the reader
and returned to callers of the reader.

Since the reader page swap will fail if the writer moved the head
page since the time the reader page set up the swap, this gives room
to record the overruns without worrying about races. If the reader
sets up the pages, records the overrun, than performs the swap,
if the swap succeeds, then the overrun variable has not been
updated since the setup before the swap.

For binary readers of the ring buffer, a flag is set in the header
of each sub page (sub buffer) of the ring buffer. This flag is embedded
in the size field of the data on the sub buffer, in the 31st bit (the size
can be 32 or 64 bits depending on the architecture), but only 27
bits needs to be used for the actual size (less actually).

We could add a new field in the sub buffer header to also record the
number of events dropped since the last read, but this will change the
format of the binary ring buffer a bit too much. Perhaps this change can
be made if the information on the number of events dropped is considered
important enough.

Note, the notification of dropped events is only used by consuming reads
or peeking at the ring buffer. Iterating over the ring buffer does not
keep this information because the necessary data is only available when
a page swap is made, and the iterator does not swap out pages.

Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 22:57:04 -04:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00