Commit Graph

418 Commits

Author SHA1 Message Date
Linus Torvalds 1dcf58d6e6 Merge branch 'akpm' (patches from Andrew)
Merge first patchbomb from Andrew Morton:

 - arch/sh updates

 - ocfs2 updates

 - kernel/watchdog feature

 - about half of mm/

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (122 commits)
  Documentation: update arch list in the 'memtest' entry
  Kconfig: memtest: update number of test patterns up to 17
  arm: add support for memtest
  arm64: add support for memtest
  memtest: use phys_addr_t for physical addresses
  mm: move memtest under mm
  mm, hugetlb: abort __get_user_pages if current has been oom killed
  mm, mempool: do not allow atomic resizing
  memcg: print cgroup information when system panics due to panic_on_oom
  mm: numa: remove migrate_ratelimited
  mm: fold arch_randomize_brk into ARCH_HAS_ELF_RANDOMIZE
  mm: split ET_DYN ASLR from mmap ASLR
  s390: redefine randomize_et_dyn for ELF_ET_DYN_BASE
  mm: expose arch_mmap_rnd when available
  s390: standardize mmap_rnd() usage
  powerpc: standardize mmap_rnd() usage
  mips: extract logic for mmap_rnd()
  arm64: standardize mmap_rnd() usage
  x86: standardize mmap_rnd() usage
  arm: factor out mmap ASLR into mmap_rnd
  ...
2015-04-14 16:49:17 -07:00
Toshi Kani 0ddab1d2ed lib/ioremap.c: add huge I/O map capability interfaces
Add ioremap_pud_enabled() and ioremap_pmd_enabled(), which return 1 when
I/O mappings with pud/pmd are enabled on the kernel.

ioremap_huge_init() calls arch_ioremap_pud_supported() and
arch_ioremap_pmd_supported() to initialize the capabilities at boot-time.

A new kernel option "nohugeiomap" is also added, so that user can disable
the huge I/O map capabilities when necessary.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:04 -07:00
Linus Torvalds 078838d565 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
 "The main changes in this cycle were:

   - changes permitting use of call_rcu() and friends very early in
     boot, for example, before rcu_init() is invoked.

   - add in-kernel API to enable and disable expediting of normal RCU
     grace periods.

   - improve RCU's handling of (hotplug-) outgoing CPUs.

   - NO_HZ_FULL_SYSIDLE fixes.

   - tiny-RCU updates to make it more tiny.

   - documentation updates.

   - miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
  cpu: Provide smpboot_thread_init() on !CONFIG_SMP kernels as well
  cpu: Defer smpboot kthread unparking until CPU known to scheduler
  rcu: Associate quiescent-state reports with grace period
  rcu: Yet another fix for preemption and CPU hotplug
  rcu: Add diagnostics to grace-period cleanup
  rcutorture: Default to grace-period-initialization delays
  rcu: Handle outgoing CPUs on exit from idle loop
  cpu: Make CPU-offline idle-loop transition point more precise
  rcu: Eliminate ->onoff_mutex from rcu_node structure
  rcu: Process offlining and onlining only at grace-period start
  rcu: Move rcu_report_unblock_qs_rnp() to common code
  rcu: Rework preemptible expedited bitmask handling
  rcu: Remove event tracing from rcu_cpu_notify(), used by offline CPUs
  rcutorture: Enable slow grace-period initializations
  rcu: Provide diagnostic option to slow down grace-period initialization
  rcu: Detect stalls caused by failure to propagate up rcu_node tree
  rcu: Eliminate empty HOTPLUG_CPU ifdef
  rcu: Simplify sync_rcu_preempt_exp_init()
  rcu: Put all orphan-callback-related code under same comment
  rcu: Consolidate offline-CPU callback initialization
  ...
2015-04-14 13:36:04 -07:00
Linus Torvalds d0bbe0dd35 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Usual trivial tree updates.  Nothing outstanding -- mostly printk()
  and comment fixes and unused identifier removals"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  goldfish: goldfish_tty_probe() is not using 'i' any more
  powerpc: Fix comment in smu.h
  qla2xxx: Fix printks in ql_log message
  lib: correct link to the original source for div64_u64
  si2168, tda10071, m88ds3103: Fix firmware wording
  usb: storage: Fix printk in isd200_log_config()
  qla2xxx: Fix printk in qla25xx_setup_mode
  init/main: fix reset_device comment
  ipwireless: missing assignment
  goldfish: remove unreachable line of code
  coredump: Fix do_coredump() comment
  stacktrace.h: remove duplicate declaration task_struct
  smpboot.h: Remove unused function prototype
  treewide: Fix typo in printk messages
  treewide: Fix typo in printk messages
  mod_devicetable: fix comment for match_flags
2015-04-14 09:50:27 -07:00
Paul E. McKenney 00df35f991 cpu: Defer smpboot kthread unparking until CPU known to scheduler
Currently, smpboot_unpark_threads() is invoked before the incoming CPU
has been added to the scheduler's runqueue structures.  This might
potentially cause the unparked kthread to run on the wrong CPU, since the
correct CPU isn't fully set up yet.

That causes a sporadic, hard to debug boot crash triggering on some
systems, reported by Borislav Petkov, and bisected down to:

  2a442c9c64 ("x86: Use common outgoing-CPU-notification code")

This patch places smpboot_unpark_threads() in a CPU hotplug
notifier with priority set so that these kthreads are unparked just after
the CPU has been added to the runqueues.

Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-13 08:25:16 +02:00
Frans Klaver fc454fdc10 init/main: fix reset_device comment
Fix incorrect spelling of situation.

Signed-off-by: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-06 23:12:43 +01:00
Zefan Li 695df2132c cpuset: initialize cpuset a bit early
Now we call ss->bind() in cgroup_init(), so cgroup_init() will
call cpuset_bind() and then the latter will access top_cpuset's
cpumask, which is NULL, because cpuset_init() is called after
cgroup_init()

The simplest fix is to swap cgroup_init() and cpuset_init().

Cc: Vladimir Davydov <vdavydov@parallels.com>
Fixes: 295458e672 ("cgroup: call cgroup_subsys->bind on cgroup subsys initialization")
Reported by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
2015-03-05 08:05:20 -05:00
Andy Lutomirski 5125991c9a init: remove CONFIG_INIT_FALLBACK
CONFIG_INIT_FALLBACK adds config bloat without an obvious use case that
makes it worth keeping around.  Delete it.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Landley <rob@landley.net>
Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:42 -08:00
Thomas Gleixner 30b8b0066c init: Get rid of x86isms
The UP local API support can be set up from an early initcall. No need
for horrible hackery in the init code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20150115211703.827943883@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22 15:10:56 +01:00
Linus Torvalds 603ba7e41b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile #2 from Al Viro:
 "Next pile (and there'll be one or two more).

  The large piece in this one is getting rid of /proc/*/ns/* weirdness;
  among other things, it allows to (finally) make nameidata completely
  opaque outside of fs/namei.c, making for easier further cleanups in
  there"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  coda_venus_readdir(): use file_inode()
  fs/namei.c: fold link_path_walk() call into path_init()
  path_init(): don't bother with LOOKUP_PARENT in argument
  fs/namei.c: new helper (path_cleanup())
  path_init(): store the "base" pointer to file in nameidata itself
  make default ->i_fop have ->open() fail with ENXIO
  make nameidata completely opaque outside of fs/namei.c
  kill proc_ns completely
  take the targets of /proc/*/ns/* symlinks to separate fs
  bury struct proc_ns in fs/proc
  copy address of proc_ns_ops into ns_common
  new helpers: ns_alloc_inum/ns_free_inum
  make proc_ns_operations work with struct ns_common * instead of void *
  switch the rest of proc_ns_operations to working with &...->ns
  netns: switch ->get()/->put()/->install()/->inum() to working with &net->ns
  make mntns ->get()/->put()/->install()/->inum() work with &mnt_ns->ns
  common object embedded into various struct ....ns
2014-12-16 15:53:03 -08:00
Linus Torvalds a7c180aa7e As the merge window is still open, and this code was not as complex
as I thought it might be. I'm pushing this in now.
 
 This will allow Thomas to debug his irq work for 3.20.
 
 This adds two new features:
 
 1) Allow traceopoints to be enabled right after mm_init(). By passing
 in the trace_event= kernel command line parameter, tracepoints can be
 enabled at boot up. For debugging things like the initialization of
 interrupts, it is needed to have tracepoints enabled very early. People
 have asked about this before and this has been on my todo list. As it
 can be helpful for Thomas to debug his upcoming 3.20 IRQ work, I'm
 pushing this now. This way he can add tracepoints into the IRQ set up
 and have users enable them when things go wrong.
 
 2) Have the tracepoints printed via printk() (the console) when they
 are triggered. If the irq code locks up or reboots the box, having the
 tracepoint output go into the kernel ring buffer is useless for
 debugging. But being able to add the tp_printk kernel command line
 option along with the trace_event= option will have these tracepoints
 printed as they occur, and that can be really useful for debugging
 early lock up or reboot problems.
 
 This code is not that intrusive and it passed all my tests. Thomas tried
 them out too and it works for his needs.
 
  Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUjv3kAAoJEEjnJuOKh9ldLNsIANAe5EmDCBw0WjR72n+G3qOH
 NC8calXfkjqHU0bv8Q3dRv20KH4MHOy6l4+EiV9/ovt71LOF3NEyUJ3HuShf9a8b
 sWcUhYbX3D1hViQe5sOzv9AWhBCFlKQGoNmQnydX9xa8ivRsBaTGJIGktWlHcwBE
 jF1i3fj3l3vRQSS8qZFXp3bzreunlGyPoSHcT6eWQeos+utj4sKwQWTLXTLQeM+6
 oQtFKRx7E5yX04qO1qFczS8qIEC6JH2C2jIRYEKUGepaELlnGkb8O7jQV/RaLF4/
 6P8VhZFG9YLS7fn7vWu0SnAN+Zwz5LzgjXAZt0FhGtIhLc18Oj8ouHH1UORsdQM=
 =Z4Un
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "As the merge window is still open, and this code was not as complex as
  I thought it might be.  I'm pushing this in now.

  This will allow Thomas to debug his irq work for 3.20.

  This adds two new features:

  1) Allow traceopoints to be enabled right after mm_init().

     By passing in the trace_event= kernel command line parameter,
     tracepoints can be enabled at boot up.  For debugging things like
     the initialization of interrupts, it is needed to have tracepoints
     enabled very early.  People have asked about this before and this
     has been on my todo list.  As it can be helpful for Thomas to debug
     his upcoming 3.20 IRQ work, I'm pushing this now.  This way he can
     add tracepoints into the IRQ set up and have users enable them when
     things go wrong.

  2) Have the tracepoints printed via printk() (the console) when they
     are triggered.

     If the irq code locks up or reboots the box, having the tracepoint
     output go into the kernel ring buffer is useless for debugging.
     But being able to add the tp_printk kernel command line option
     along with the trace_event= option will have these tracepoints
     printed as they occur, and that can be really useful for debugging
     early lock up or reboot problems.

  This code is not that intrusive and it passed all my tests.  Thomas
  tried them out too and it works for his needs.

   Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org"

* tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Add tp_printk cmdline to have tracepoints go to printk()
  tracing: Move enabling tracepoints to just after rcu_init()
2014-12-16 12:53:59 -08:00
Steven Rostedt (Red Hat) 5f893b2639 tracing: Move enabling tracepoints to just after rcu_init()
Enabling tracepoints at boot up can be very useful. The tracepoint
can be initialized right after RCU has been. There's no need to
wait for the early_initcall() to be called. That's too late for some
things that can use tracepoints for debugging. Move the logic to
enable tracepoints out of the initcalls and into init/main.c to
right after rcu_init().

This also allows trace_printk() to be used early too.

Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos
Link: http://lkml.kernel.org/r/20141214164104.307127356@goodmis.org

Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-12-15 10:16:50 -05:00
Linus Torvalds 67e2c38838 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
 "In terms of changes, there's general maintenance to the Smack,
  SELinux, and integrity code.

  The IMA code adds a new kconfig option, IMA_APPRAISE_SIGNED_INIT,
  which allows IMA appraisal to require signatures.  Support for reading
  keys from rootfs before init is call is also added"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
  selinux: Remove security_ops extern
  security: smack: fix out-of-bounds access in smk_parse_smack()
  VFS: refactor vfs_read()
  ima: require signature based appraisal
  integrity: provide a hook to load keys when rootfs is ready
  ima: load x509 certificate from the kernel
  integrity: provide a function to load x509 certificate from the kernel
  integrity: define a new function integrity_read_file()
  Security: smack: replace kzalloc with kmem_cache for inode_smack
  Smack: Lock mode for the floor and hat labels
  ima: added support for new kernel cmdline parameter ima_template_fmt
  ima: allocate field pointers array on demand in template_desc_init_fields()
  ima: don't allocate a copy of template_fmt in template_desc_init_fields()
  ima: display template format in meas. list if template name length is zero
  ima: added error messages to template-related functions
  ima: use atomic bit operations to protect policy update interface
  ima: ignore empty and with whitespaces policy lines
  ima: no need to allocate entry for comment
  ima: report policy load status
  ima: use path names cache
  ...
2014-12-14 20:36:37 -08:00
Joonsoo Kim eefa864b70 mm/page_ext: resurrect struct page extending code for debugging
When we debug something, we'd like to insert some information to every
page.  For this purpose, we sometimes modify struct page itself.  But,
this has drawbacks.  First, it requires re-compile.  This makes us
hesitate to use the powerful debug feature so development process is
slowed down.  And, second, sometimes it is impossible to rebuild the
kernel due to third party module dependency.  At third, system behaviour
would be largely different after re-compile, because it changes size of
struct page greatly and this structure is accessed by every part of
kernel.  Keeping this as it is would be better to reproduce errornous
situation.

This feature is intended to overcome above mentioned problems.  This
feature allocates memory for extended data per page in certain place
rather than the struct page itself.  This memory can be accessed by the
accessor functions provided by this code.  During the boot process, it
checks whether allocation of huge chunk of memory is needed or not.  If
not, it avoids allocating memory at all.  With this advantage, we can
include this feature into the kernel in default and can avoid rebuild and
solve related problems.

Until now, memcg uses this technique.  But, now, memcg decides to embed
their variable to struct page itself and it's code to extend struct page
has been removed.  I'd like to use this code to develop debug feature, so
this patch resurrect it.

To help these things to work well, this patch introduces two callbacks for
clients.  One is the need callback which is mandatory if user wants to
avoid useless memory allocation at boot-time.  The other is optional, init
callback, which is used to do proper initialization after memory is
allocated.  Detailed explanation about purpose of these functions is in
code comment.  Please refer it.

Others are completely same with previous extension code in memcg.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Jungsoo Son <jungsoo.son@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:48 -08:00
Al Viro 707c5960f1 Merge branch 'nsfs' into for-next 2014-12-10 21:31:59 -05:00
Al Viro e149ed2b80 take the targets of /proc/*/ns/* symlinks to separate fs
New pseudo-filesystem: nsfs.  Targets of /proc/*/ns/* live there now.
It's not mountable (not even registered, so it's not in /proc/filesystems,
etc.).  Files on it *are* bindable - we explicitly permit that in do_loopback().

This stuff lives in fs/nsfs.c now; proc_ns_fget() moved there as well.
get_proc_ns() is a macro now (it's simply returning ->i_private; would
have been an inline, if not for header ordering headache).
proc_ns_inode() is an ex-parrot.  The interface used in procfs is
ns_get_path(path, task, ops) and ns_get_name(buf, size, task, ops).

Dentries and inodes are never hashed; a non-counting reference to dentry
is stashed in ns_common (removed by ->d_prune()) and reused by ns_get_path()
if present.  See ns_get_path()/ns_prune_dentry/nsfs_evict() for details
of that mechanism.

As the result, proc_ns_follow_link() has stopped poking in nd->path.mnt;
it does nd_jump_link() on a consistent <vfsmount,dentry> pair it gets
from ns_get_path().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-10 21:30:20 -05:00
Andy Lutomirski 6ef4536e2f init: allow CONFIG_INIT_FALLBACK=n to disable defaults if init= fails
If a user puts init=/whatever on the command line and /whatever can't be
run, then the kernel will try a few default options before giving up.  If
init=/whatever came from a bootloader prompt, then this is unexpected but
probably harmless.  On the other hand, if it comes from a script (e.g.  a
tool like virtme or perhaps a future kselftest script), then the fallbacks
are likely to exist, but they'll do the wrong thing.  For example, they
might unexpectedly invoke systemd.

This adds a config option CONFIG_INIT_FALLBACK.  If unset, then a failure
to run the specified init= process be fatal.

The tentative plan is to remove CONFIG_INIT_FALLBACK for 3.20.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Rob Landley <rob@landley.net>
Cc: Chuck Ebbert <cebbert.lkml@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:12 -08:00
Johannes Weiner 1306a85aed mm: embed the memcg pointer directly into struct page
Memory cgroups used to have 5 per-page pointers.  To allow users to
disable that amount of overhead during runtime, those pointers were
allocated in a separate array, with a translation layer between them and
struct page.

There is now only one page pointer remaining: the memcg pointer, that
indicates which cgroup the page is associated with when charged.  The
complexity of runtime allocation and the runtime translation overhead is
no longer justified to save that *potential* 0.19% of memory.  With
CONFIG_SLUB, page->mem_cgroup actually sits in the doubleword padding
after the page->private member and doesn't even increase struct page,
and then this patch actually saves space.  Remaining users that care can
still compile their kernels without CONFIG_MEMCG.

     text    data     bss     dec     hex     filename
  8828345 1725264  983040 11536649 b00909  vmlinux.old
  8827425 1725264  966656 11519345 afc571  vmlinux.new

[mhocko@suse.cz: update Documentation/cgroups/memory.txt]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:09 -08:00
James Morris a6aacbde40 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next 2014-11-19 21:36:07 +11:00
Dmitry Kasatkin c9cd2ce2bc integrity: provide a hook to load keys when rootfs is ready
Keys can only be loaded once the rootfs is mounted. Initcalls
are not suitable for that. This patch defines a special hook
to load the x509 public keys onto the IMA keyring, before
attempting to access any file. The keys are required for
verifying the file's signature. The hook is called after the
root filesystem is mounted and before the kernel calls 'init'.

Changes in v3:
* added more explanation to the patch description (Mimi)

Changes in v2:
* Hook renamed as 'integrity_load_keys()' to handle both IMA and EVM
  keys by integrity subsystem.
* Hook patch moved after defining loading functions

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-11-17 23:12:01 -05:00
Daniel Thompson 3438cf549d param: fix crash on bad kernel arguments
Currently if the user passes an invalid value on the kernel command line
then the kernel will crash during argument parsing. On most systems this
is very hard to debug because the console hasn't been initialized yet.

This is a regression due to commit 51e158c12a ("param: hand arguments
after -- straight to init") which, in response to the systemd debug
controversy, made it possible to explicitly pass arguments to init. To
achieve this parse_args() was extended from simply returning an error
code to returning a pointer. Regretably the new init args logic does not
perform a proper validity check on the pointer resulting in a crash.

This patch fixes the validity check. Should the check fail then no arguments
will be passed to init. This is reasonable and matches how the kernel treats
its own arguments (i.e. no error recovery).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-11-11 17:03:19 +10:30
Geert Uytterhoeven 63a12d9d01 kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h>
Consolidate the various external const and non-const declarations of
__start___param[] and __stop___param in <linux/moduleparam.h>.  This
requires making a few struct kernel_param pointers in kernel/params.c
const.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:28 +02:00
Linus Torvalds faafcba3b5 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
     Hansen)

   - Various sched/idle refinements for better idle handling (Nicolas
     Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)

   - sched/numa updates and optimizations (Rik van Riel)

   - sysbench speedup (Vincent Guittot)

   - capacity calculation cleanups/refactoring (Vincent Guittot)

   - Various cleanups to thread group iteration (Oleg Nesterov)

   - Double-rq-lock removal optimization and various refactorings
     (Kirill Tkhai)

   - various sched/deadline fixes

  ... and lots of other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
  sched/fair: Delete resched_cpu() from idle_balance()
  sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
  sched: Improve sysbench performance by fixing spurious active migration
  sched/x86: Fix up typo in topology detection
  x86, sched: Add new topology for multi-NUMA-node CPUs
  sched/rt: Use resched_curr() in task_tick_rt()
  sched: Use rq->rd in sched_setaffinity() under RCU read lock
  sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
  sched: Use dl_bw_of() under RCU read lock
  sched/fair: Remove duplicate code from can_migrate_task()
  sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
  sched: print_rq(): Don't use tasklist_lock
  sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
  sched: Fix the task-group check in tg_has_rt_tasks()
  sched/fair: Leverage the idle state info when choosing the "idlest" cpu
  sched: Let the scheduler see CPU idle states
  sched/deadline: Fix inter- exclusive cpusets migrations
  sched/deadline: Clear dl_entity params when setscheduling to different class
  sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
  ...
2014-10-13 16:23:15 +02:00
Linus Torvalds d6dd50e07c Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - changes related to No-CBs CPUs and NO_HZ_FULL

   - RCU-tasks implementation

   - torture-test updates

   - miscellaneous fixes

   - locktorture updates

   - RCU documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
  workqueue: Use cond_resched_rcu_qs macro
  workqueue: Add quiescent state between work items
  locktorture: Cleanup header usage
  locktorture: Cannot hold read and write lock
  locktorture: Fix __acquire annotation for spinlock irq
  locktorture: Support rwlocks
  rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
  locktorture: Document boot/module parameters
  rcutorture: Rename rcutorture_runnable parameter
  locktorture: Add test scenario for rwsem_lock
  locktorture: Add test scenario for mutex_lock
  locktorture: Make torture scripting account for new _runnable name
  locktorture: Introduce torture context
  locktorture: Support rwsems
  locktorture: Add infrastructure for torturing read locks
  torture: Address race in module cleanup
  locktorture: Make statistics generic
  locktorture: Teach about lock debugging
  locktorture: Support mutexes
  locktorture: Add documentation
  ...
2014-10-13 15:44:12 +02:00
Aaron Tomlin d4311ff1a8 init/main.c: Give init_task a canary
Tasks get their end of stack set to STACK_END_MAGIC with the
aim to catch stack overruns. Currently this feature does not
apply to init_task. This patch removes this restriction.

Note that a similar patch was posted by Prarit Bhargava
some time ago but was never merged:

  http://marc.info/?l=linux-kernel&m=127144305403241&w=2

Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: aneesh.kumar@linux.vnet.ibm.com
Cc: dzickus@redhat.com
Cc: bmr@redhat.com
Cc: jcastillo@redhat.com
Cc: jgh@redhat.com
Cc: minchan@kernel.org
Cc: tglx@linutronix.de
Cc: hannes@cmpxchg.org
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Daeseok Youn <daeseok.youn@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1410527779-8133-2-git-send-email-atomlin@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-19 12:35:22 +02:00
Paul E. McKenney f4579fc57c rcu: Fix attempt to avoid unsolicited offloading of callbacks
Commit b58cc46c5f (rcu: Don't offload callbacks unless specifically
requested) failed to adjust the callback lists of the CPUs that are
known to be no-CBs CPUs only because they are also nohz_full= CPUs.
This failure can result in callbacks that are posted during early boot
getting stranded on nxtlist for CPUs whose no-CBs property becomes
apparent late, and there can also be spurious warnings about offline
CPUs posting callbacks.

This commit fixes these problems by adding an early-boot rcu_init_nohz()
that properly initializes the no-CBs CPUs.

Note that kernels built with CONFIG_RCU_NOCB_CPU_ALL=y or with
CONFIG_RCU_NOCB_CPU=n do not exhibit this bug.  Neither do kernels
booted without the nohz_full= boot parameter.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2014-09-16 10:07:59 -07:00
Frederic Weisbecker a80e49e2cc nohz: Move nohz full init call to tick init
This way we unbloat a bit main.c and more importantly we initialize
nohz full after init_IRQ(). This dependency will be needed in further
patches because nohz full needs irq work to raise its own IRQ.
Information about the support for this ability on ARM64 is obtained on
init_IRQ() which initialize the pointer to __smp_call_function.

Since tick_init() is called right after init_IRQ(), this is a good place
to call tick_nohz_init() and prepare for that dependency.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-09-13 18:34:44 +02:00
Fabian Frederick dd4d9fecbe init/main.c: code clean-up
Fixing some checkpatch warnings(remove global initialization, move
__initdata, coalesce formats ...)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:27 -07:00
Linus Torvalds 4251c2a670 Most of this is cleaning up various driver sysfs permissions so we can
re-add the perm check (we unified the module param and sysfs checks, but
 the module ones were stronger so we weakened them temporarily).
 
 Param parsing gets documented, and also "--" now forces args to be
 handed to init (and ignored by the kernel).
 
 Module NX/RO protections get tightened: we now set them before calling
 parse_args().
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTl+oJAAoJENkgDmzRrbjxtUEP/jIXml01jE2HquOJ/DfrCJOt
 ry5L5Iy8wVBRotTszrXqlD6+W8fLYsEdhM65Wof1H7X1qjaulqYZmrL7bQn4rIGN
 YPUmO5rOzECeAPNW5+e2JLnR4bmS99gVcWzJFCHUBd7Z8ceKaoIk7/XvUg6Mdjg7
 v0kJ5X+U9da2sVYYcZ71euth4ADLFDRNRexA1mPI6mKzJLOBgfvCBWZnkFVdBcjd
 VmL6ceFo/yP9Ed4pgG/4uXq1dZ4ZttpjPusDmNcjq+snOzsQb4tW+KB2Pr6iTwQy
 TDt7lQm5+xfUXgUG/S5L6PYn10P44Voo7AEJa+QK5YPSOY/eRVA0h4/ayP0vqDaJ
 LpZjqXbW77G4yOgEV9KRFLLXiFXykTh2TyCPYL5G2XVXQp1OmViu2f21JWJLFLgL
 mqOXYWdowOGVOOoTgwxIdxczCFCATJUaU5Ig6ay8C02E2mCwIV+IaGSdpsCiyjz/
 dNNumMxWg0NMo/c0YG4K3Ake6ZaGrwbnuJYijaEj6mgpifhh7k4yhFciXGLpkLnS
 Yuo4ORO0GX34z1+bX0iwrgMGPdy7+BnbXsDdWJsbsnwnKKes/Sp44fNl4lPwdM3n
 siaPsxmfAtl9EGqbkU1Fk+x5+X/Lv2I/7/nX5n53520RLkJJpbeMDfHUqpbrqeUN
 JNUTOZ9o72EqDVKnn175
 =IxSN
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Most of this is cleaning up various driver sysfs permissions so we can
  re-add the perm check (we unified the module param and sysfs checks,
  but the module ones were stronger so we weakened them temporarily).

  Param parsing gets documented, and also "--" now forces args to be
  handed to init (and ignored by the kernel).

  Module NX/RO protections get tightened: we now set them before calling
  parse_args()"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: set nx before marking module MODULE_STATE_COMING.
  samples/kobject/: avoid world-writable sysfs files.
  drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files.
  drivers/staging/speakup/: avoid world-writable sysfs files.
  drivers/regulator/virtual: avoid world-writable sysfs files.
  drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files.
  drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files.
  drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files.
  drivers/mtd/devices/docg3.c: avoid world-writable sysfs files.
  speakup: fix incorrect perms on speakup_acntsa.c
  cpumask.h: silence warning with -Wsign-compare
  Documentation: Update kernel-parameters.tx
  param: hand arguments after -- straight to init
  modpost: Fix resource leak in read_dump()
2014-06-11 16:09:14 -07:00
Linus Torvalds 2071b3e34f Merge branch 'x86/espfix' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull x86-64 espfix changes from Peter Anvin:
 "This is the espfix64 code, which fixes the IRET information leak as
  well as the associated functionality problem.  With this code applied,
  16-bit stack segments finally work as intended even on a 64-bit
  kernel.

  Consequently, this patchset also removes the runtime option that we
  added as an interim measure.

  To help the people working on Linux kernels for very small systems,
  this patchset also makes these compile-time configurable features"

* 'x86/espfix' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "x86-64, modify_ldt: Make support for 16-bit segments a runtime option"
  x86, espfix: Make it possible to disable 16-bit support
  x86, espfix: Make espfix64 a Kconfig option, fix UML
  x86, espfix: Fix broken header guard
  x86, espfix: Move espfix definitions into a separate header file
  x86-32, espfix: Remove filter for espfix32 due to race
  x86-64, espfix: Don't leak bits 31:16 of %esp returning to 16-bit stack
2014-06-05 07:46:15 -07:00
Andrew Morton 647f010bff init/main.c: remove an ifdef
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:21 -07:00
Oleg Nesterov 34a1b7236a kthreads: kill CLONE_KERNEL, change kernel_thread(kernel_init) to avoid CLONE_SIGHAND
1. Remove CLONE_KERNEL, it has no users and it is dangerous.

   The (old) comment says "List of flags we want to share for kernel
   threads" but this is not true, we do not want to share ->sighand by
   default. This flag can only be used if the caller is sure that both
   parent/child will never play with signals (say, allow_signal/etc).

2. Change rest_init() to clone kernel_init() without CLONE_SIGHAND.

   In this case CLONE_SIGHAND does not really hurt, and it looks like
   optimization because copy_sighand() can avoid kmem_cache_alloc().

   But in fact this only adds the minor pessimization. kernel_init()
   is going to exec the init process, and de_thread() will need to
   unshare ->sighand and do kmem_cache_alloc(sighand_cachep) anyway,
   but it needs to do more work and take tasklist_lock and siglock.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:21 -07:00
Prarit Bhargava 7b0b73d766 init/main.c: add initcall_blacklist kernel parameter
When a module is built into the kernel the module_init() function
becomes an initcall.  Sometimes debugging through dynamic debug can
help, however, debugging built in kernel modules is typically done by
changing the .config, recompiling, and booting the new kernel in an
effort to determine exactly which module caused a problem.

This patchset can be useful stand-alone or combined with initcall_debug.
There are cases where some initcalls can hang the machine before the
console can be flushed, which can make initcall_debug output inaccurate.
Having the ability to skip initcalls can help further debugging of these
scenarios.

Usage: initcall_blacklist=<list of comma separated initcalls>

ex) added "initcall_blacklist=sgi_uv_sysfs_init" as a kernel parameter and
the log contains:

	blacklisting initcall sgi_uv_sysfs_init
	...
	...
	initcall sgi_uv_sysfs_init blacklisted

ex) added "initcall_blacklist=foo_bar,sgi_uv_sysfs_init" as a kernel parameter
and the log contains:

	blacklisting initcall foo_bar
	blacklisting initcall sgi_uv_sysfs_init
	...
	...
	initcall sgi_uv_sysfs_init blacklisted

[akpm@linux-foundation.org: tweak printk text]
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Rob Landley <rob@landley.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:21 -07:00
Andrew Morton d62cf81524 init/main.c: don't use pr_debug()
Pertially revert commit ea676e846a ("init/main.c: convert to
pr_foo()").

Unbeknownst to me, pr_debug() is different from the other pr_foo()
levels: pr_debug() is a no-op when DEBUG is not defined.

Happily, init/main.c does have a #define DEBUG so we didn't break
initcall_debug.  But the functioning of initcall_debug should not be
dependent upon the presence of that #define DEBUG.

Reported-by: Russell King <rmk@arm.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:21 -07:00
Borislav Petkov a8fe19ebfb kernel/printk: use symbolic defines for console loglevels
... instead of naked numbers.

Stuff in sysrq.c used to set it to 8 which is supposed to mean above
default level so set it to DEBUG instead as we're terminating/killing all
tasks and we want to be verbose there.

Also, correct the check in x86_64_start_kernel which should be >= as
we're clearly issuing the string there for all debug levels, not only
the magical 10.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:17 -07:00
Oleg Nesterov dc6f6c97f1 memcg: kill start_kernel()->mm_init_owner(&init_mm)
Remove start_kernel()->mm_init_owner(&init_mm, &init_task).

This doesn't really hurt but unnecessary and misleading.  init_task is the
"swapper" thread == current, its ->mm is always NULL.  And init_mm can
only be used as ->active_mm, not as ->mm.

mm_init_owner() has a single caller with this patch, perhaps it should
die.  mm_init() can initialize ->owner under #ifdef.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Peter Chiang <pchiang@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:03 -07:00
H. Peter Anvin e6ab9a20e7 Merge commit '7ed6fb9b5a5510e4ef78ab27419184741169978a' into x86/espfix
Merge in Linus' tree with:

fa81511bb0 x86-64, modify_ldt: Make support for 16-bit segments a runtime option

... reverted, to avoid a conflict.  This commit is no longer necessary
with the proper fix in place.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-21 15:23:19 -07:00
Andi Kleen 722a9f9299 asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
As requested by Linus add explicit __visible to the asmlinkage users.
This marks functions visible to assembler.

Tree sweep for rest of tree.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-4-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-05 16:07:46 -07:00
H. Peter Anvin 197725de65 x86, espfix: Make espfix64 a Kconfig option, fix UML
Make espfix64 a hidden Kconfig option.  This fixes the x86-64 UML
build which had broken due to the non-existence of init_espfix_bsp()
in UML: since UML uses its own Kconfig, this option does not appear in
the UML build.

This also makes it possible to make support for 16-bit segments a
configuration option, for the people who want to minimize the size of
the kernel.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
2014-05-04 10:00:49 -07:00
H. Peter Anvin 3891a04aaf x86-64, espfix: Don't leak bits 31:16 of %esp returning to 16-bit stack
The IRET instruction, when returning to a 16-bit segment, only
restores the bottom 16 bits of the user space stack pointer.  This
causes some 16-bit software to break, but it also leaks kernel state
to user space.  We have a software workaround for that ("espfix") for
the 32-bit kernel, but it relies on a nonzero stack segment base which
is not available in 64-bit mode.

In checkin:

    b3b42ac2cb x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels

we "solved" this by forbidding 16-bit segments on 64-bit kernels, with
the logic that 16-bit support is crippled on 64-bit kernels anyway (no
V86 support), but it turns out that people are doing stuff like
running old Win16 binaries under Wine and expect it to work.

This works around this by creating percpu "ministacks", each of which
is mapped 2^16 times 64K apart.  When we detect that the return SS is
on the LDT, we copy the IRET frame to the ministack and use the
relevant alias to return to userspace.  The ministacks are mapped
readonly, so if IRET faults we promote #GP to #DF which is an IST
vector and thus has its own stack; we then do the fixup in the #DF
handler.

(Making #GP an IST exception would make the msr_safe functions unsafe
in NMI/MC context, and quite possibly have other effects.)

Special thanks to:

- Andy Lutomirski, for the suggestion of using very small stack slots
  and copy (as opposed to map) the IRET frame there, and for the
  suggestion to mark them readonly and let the fault promote to #DF.
- Konrad Wilk for paravirt fixup and testing.
- Borislav Petkov for testing help and useful comments.

Reported-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.com
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Lutomriski <amluto@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dirk Hohndel <dirk@hohndel.org>
Cc: Arjan van de Ven <arjan.van.de.ven@intel.com>
Cc: comex <comexk@gmail.com>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # consider after upstream merge
2014-04-30 14:14:28 -07:00
Rusty Russell 51e158c12a param: hand arguments after -- straight to init
The kernel passes any args it doesn't need through to init, except it
assumes anything containing '.' belongs to the kernel (for a module).
This change means all users can clearly distinguish which arguments
are for init.

For example, the kernel uses debug ("dee-bug") to mean log everything to
the console, where systemd uses the debug from the Scandinavian "day-boog"
meaning "fail to boot".  If a future versions uses argv[] instead of
reading /proc/cmdline, this confusion will be avoided.

eg: test 'FOO="this is --foo"' -- 'systemd.debug="true true true"'

Gives:
argv[0] = '/debug-init'
argv[1] = 'test'
argv[2] = 'systemd.debug=true true true'
envp[0] = 'HOME=/'
envp[1] = 'TERM=linux'
envp[2] = 'FOO=this is --foo'

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-04-28 11:48:34 +09:30
Rafael J. Wysocki c4e1acbb35 ACPI / init: Invoke early ACPI initialization later
Commit 73f7d1ca32 (ACPI / init: Run acpi_early_init() before
timekeeping_init()) optimistically moved the early ACPI initialization
before timekeeping_init(), but that didn't work, because it broke fast
TSC calibration for Julian Wollrath on Thinkpad x121e (and most likely
for others too).  The reason is that acpi_early_init() enables the SCI
and that interferes with the fast TSC calibration mechanism.

Thus follow the original idea to execute acpi_early_init() before
efi_enter_virtual_mode() to help the EFI people for now and we can
revisit the other problem that commit 73f7d1ca32 attempted to
address in the future (if really necessary).

Fixes: 73f7d1ca32 (ACPI / init: Run acpi_early_init() before timekeeping_init())
Reported-by: Julian Wollrath <jwollrath@web.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-13 00:53:51 +01:00
Linus Torvalds c4ad8f98be execve: use 'struct filename *' for executable name passing
This changes 'do_execve()' to get the executable name as a 'struct
filename', and to free it when it is done.  This is what the normal
users want, and it simplifies and streamlines their error handling.

The controlled lifetime of the executable name also fixes a
use-after-free problem with the trace_sched_process_exec tracepoint: the
lifetime of the passed-in string for kernel users was not at all
obvious, and the user-mode helper code used UMH_WAIT_EXEC to serialize
the pathname allocation lifetime with the execve() having finished,
which in turn meant that the trace point that happened after
mm_release() of the old process VM ended up using already free'd memory.

To solve the kernel string lifetime issue, this simply introduces
"getname_kernel()" that works like the normal user-space getname()
function, except with the source coming from kernel memory.

As Oleg points out, this also means that we could drop the tcomm[] array
from 'struct linux_binprm', since the pathname lifetime now covers
setup_new_exec().  That would be a separate cleanup.

Reported-by: Igor Zhbanov <i.zhbanov@samsung.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-05 12:54:53 -08:00
Kang Hu 729abd2ba7 init/main.c: remove unused declaractions of mca_init() and sbus_init()
mca_init() no longer exists.
sbus_init() is defined in arch/sparc/kernel/sbus.c and is a subsys_initcall.
both are not needed in main.c any more.

Signed-off-by: Kang Hu <hukangustc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:39 -08:00
Linus Torvalds 09da8dfa98 ACPI and power management updates for 3.14-rc1
- ACPI core changes to make it create a struct acpi_device object for every
    device represented in the ACPI tables during all namespace scans regardless
    of the current status of that device.  In accordance with this, ACPI hotplug
    operations will not delete those objects, unless the underlying ACPI tables
    go away.
 
  - On top of the above, new sysfs attribute for ACPI device objects allowing
    user space to check device status by triggering the execution of _STA for
    its ACPI object.  From Srinivas Pandruvada.
 
  - ACPI core hotplug changes reducing code duplication, integrating the
    PCI root hotplug with the core and reworking container hotplug.
 
  - ACPI core simplifications making it use ACPI_COMPANION() in the code
    "glueing" ACPI device objects to "physical" devices.
 
  - ACPICA update to upstream version 20131218.  This adds support for the
    DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
    facilities.  From Bob Moore, Lv Zheng and Betty Dall.
 
  - Init code change to carry out the early ACPI initialization earlier.
    That should allow us to use ACPI during the timekeeping initialization
    and possibly to simplify the EFI initialization too.  From Chun-Yi Lee.
 
  - Clenups of the inclusions of ACPI headers in many places all over from
    Lv Zheng and Rashika Kheria (work in progress).
 
  - New helper for ACPI _DSM execution and rework of the code in drivers
    that uses _DSM to execute it via the new helper.  From Jiang Liu.
 
  - New Win8 OSI blacklist entries from Takashi Iwai.
 
  - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
    Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
    Tang Chen, Zhang Rui.
 
  - intel_pstate driver updates, including proper Baytrail support, from
    Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
 
  - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
 
  - powernow-k6 cpufreq driver fixes from Mikulas Patocka.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
 
  - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
    Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
 
  - cpuidle cleanups from Bartlomiej Zolnierkiewicz.
 
  - Support for hibernation APM events from Bin Shi.
 
  - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
    during thaw transitions from Bjørn Mork.
 
  - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
 
  - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
    Rashika Kheria.
 
  - New tool for profiling system suspend from Todd E Brandt and a cpupower
    tool cleanup from One Thousand Gnomes.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJS3a1eAAoJEILEb/54YlRxnTgP/iGawvgjKWm6Qqp7WSIvd5gQ
 zZ6q75C6Pc/W2fq1+OzVGnpCF8WYFy+nFDAXOvUHjIXuoxSwFcuW5l4aMckgl/0a
 TXEWe9MJrCHHRfDApfFacCJ44U02bjJAD5vTyL/hKA+IHeinq4WCSojryYC+8jU0
 cBrUIV0aNH8r5JR2WJNAyv/U29rXsDUOu0I4qTqZ4YaZT6AignMjtLXn1e9AH1Pn
 DPZphTIo/HMnb+kgBOjt4snMk+ahVO9eCOxh/hH8ecnWExw9WynXoU5Nsna0tSZs
 ssyHC7BYexD3oYsG8D52cFUpp4FCsJ0nFQNa2kw0LY+0FBNay43LySisKYHZPXEs
 2WpESDv+/t7yhtnrvM+TtA7aBheKm2XMWGFSu/aERLE17jIidOkXKH5Y7ryYLNf/
 uyRKxNS0NcZWZ0G+/wuY02jQYNkfYz3k/nTr8BAUItRBjdporGIRNEnR9gPzgCUC
 uQhjXWMPulqubr8xbyefPWHTEzU2nvbXwTUWGjrBxSy8zkyy5arfqizUj+VG6afT
 NsboANoMHa9b+xdzigSFdA3nbVK6xBjtU6Ywntk9TIpODKF5NgfARx0H+oSH+Zrj
 32bMzgZtHw/lAbYsnQ9OnTY6AEWQYt6NMuVbTiLXrMHhM3nWwfg/XoN4nZqs6jPo
 IYvE6WhQZU6L6fptGHFC
 =dRf6
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "As far as the number of commits goes, the top spot belongs to ACPI
  this time with cpufreq in the second position and a handful of PM
  core, PNP and cpuidle updates.  They are fixes and cleanups mostly, as
  usual, with a couple of new features in the mix.

  The most visible change is probably that we will create struct
  acpi_device objects (visible in sysfs) for all devices represented in
  the ACPI tables regardless of their status and there will be a new
  sysfs attribute under those objects allowing user space to check that
  status via _STA.

  Consequently, ACPI device eject or generally hot-removal will not
  delete those objects, unless the table containing the corresponding
  namespace nodes is unloaded, which is extremely rare.  Also ACPI
  container hotplug will be handled quite a bit differently and cpufreq
  will support CPU boost ("turbo") generically and not only in the
  acpi-cpufreq driver.

  Specifics:

   - ACPI core changes to make it create a struct acpi_device object for
     every device represented in the ACPI tables during all namespace
     scans regardless of the current status of that device.  In
     accordance with this, ACPI hotplug operations will not delete those
     objects, unless the underlying ACPI tables go away.

   - On top of the above, new sysfs attribute for ACPI device objects
     allowing user space to check device status by triggering the
     execution of _STA for its ACPI object.  From Srinivas Pandruvada.

   - ACPI core hotplug changes reducing code duplication, integrating
     the PCI root hotplug with the core and reworking container hotplug.

   - ACPI core simplifications making it use ACPI_COMPANION() in the
     code "glueing" ACPI device objects to "physical" devices.

   - ACPICA update to upstream version 20131218.  This adds support for
     the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
     debug facilities.  From Bob Moore, Lv Zheng and Betty Dall.

   - Init code change to carry out the early ACPI initialization
     earlier.  That should allow us to use ACPI during the timekeeping
     initialization and possibly to simplify the EFI initialization too.
     From Chun-Yi Lee.

   - Clenups of the inclusions of ACPI headers in many places all over
     from Lv Zheng and Rashika Kheria (work in progress).

   - New helper for ACPI _DSM execution and rework of the code in
     drivers that uses _DSM to execute it via the new helper.  From
     Jiang Liu.

   - New Win8 OSI blacklist entries from Takashi Iwai.

   - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
     Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
     Rashika Kheria, Tang Chen, Zhang Rui.

   - intel_pstate driver updates, including proper Baytrail support,
     from Dirk Brandewie and intel_pstate documentation from Ramkumar
     Ramachandra.

   - Generic CPU boost ("turbo") support for cpufreq from Lukasz
     Majewski.

   - powernow-k6 cpufreq driver fixes from Mikulas Patocka.

   - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
     Brown.

   - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
     Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
     Kumar.

   - cpuidle cleanups from Bartlomiej Zolnierkiewicz.

   - Support for hibernation APM events from Bin Shi.

   - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
     disabled during thaw transitions from Bjørn Mork.

   - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
     Hansson.

   - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
     Kurusa, Rashika Kheria.

   - New tool for profiling system suspend from Todd E Brandt and a
     cpupower tool cleanup from One Thousand Gnomes"

* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
  thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
  cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
  Documentation: cpufreq / boost: Update BOOST documentation
  cpufreq: exynos: Extend Exynos cpufreq driver to support boost
  cpufreq / boost: Kconfig: Support for software-managed BOOST
  acpi-cpufreq: Adjust the code to use the common boost attribute
  cpufreq: Add boost frequency support in core
  intel_pstate: Add trace point to report internal state.
  cpufreq: introduce cpufreq_generic_get() routine
  ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
  cpufreq: stats: create sysfs entries when cpufreq_stats is a module
  cpufreq: stats: free table and remove sysfs entry in a single routine
  cpufreq: stats: remove hotplug notifiers
  cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
  cpufreq: speedstep: remove unused speedstep_get_state
  platform: introduce OF style 'modalias' support for platform bus
  PM / tools: new tool for suspend/resume performance optimization
  ACPI: fix module autoloading for ACPI enumerated devices
  ACPI: add module autoloading support for ACPI enumerated devices
  ACPI: fix create_modalias() return value handling
  ...
2014-01-24 15:51:02 -08:00
Tetsuo Handa 499a4584d7 init: fix possible format string bug
Use constant format string in case message changes.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:58 -08:00
Geert Uytterhoeven 128e3f4541 init/main.c: remove unused declaration of tc_init()
Its user was removed in v2.5.2.4.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:58 -08:00
Santosh Shilimkar 098b081b50 init/main.c: use memblock apis for early memory allocations
Switch to memblock interfaces for early memory allocator instead of
bootmem allocator.  No functional change in beahvior than what it is in
current code from bootmem users points of view.

Archs already converted to NO_BOOTMEM now directly use memblock
interfaces instead of bootmem wrappers build on top of memblock.  And
the archs which still uses bootmem, these new apis just fall back to
exiting bootmem APIs.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:46 -08:00
Kirill A. Shutemov b35f1819ac mm: create a separate slab for page->ptl allocation
If DEBUG_SPINLOCK and DEBUG_LOCK_ALLOC are enabled spinlock_t on x86_64
is 72 bytes.  For page->ptl they will be allocated from kmalloc-96 slab,
so we loose 24 on each.  An average system can easily allocate few tens
thousands of page->ptl and overhead is significant.

Let's create a separate slab for page->ptl allocation to solve this.

To make sure that it really works this time, some numbers from my test
machine (just booted, no load):

Before:
  # grep '^\(kmalloc-96\|page->ptl\)' /proc/slabinfo
  kmalloc-96         31987  32190    128   30    1 : tunables  120   60    8 : slabdata   1073   1073     92
After:
  # grep '^\(kmalloc-96\|page->ptl\)' /proc/slabinfo
  page->ptl          27516  28143     72   53    1 : tunables  120   60    8 : slabdata    531    531      9
  kmalloc-96          3853   5280    128   30    1 : tunables  120   60    8 : slabdata    176    176      0

Note that the patch is useful not only for debug case, but also for
PREEMPT_RT, where spinlock_t is always bloated.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Lee, Chun-Yi 73f7d1ca32 ACPI / init: Run acpi_early_init() before timekeeping_init()
This is a variant patch from Rafael J. Wysocki's
ACPI / init: Run acpi_early_init() before efi_enter_virtual_mode()

According to Matt Fleming, if acpi_early_init() was executed before
efi_enter_virtual_mode(), the EFI initialization could benefit from
it, so Rafael's patch makes that happen.

And, we want accessing ACPI TAD device to set system clock, so move
acpi_early_init() before timekeeping_init(). This final position is
also before efi_enter_virtual_mode().

Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-16 01:46:31 +01:00