Commit Graph

161 Commits

Author SHA1 Message Date
Laszlo Attila Toth 4a19ec5800 [NET]: Introducing socket mark socket option.
A userspace program may wish to set the mark for each packets its send
without using the netfilter MARK target. Changing the mark can be used
for mark based routing without netfilter or for packet filtering.

It requires CAP_NET_ADMIN capability.

Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:19 -08:00
Bryan Wu 408dbc0da2 [Blackfin] arch: remove old I2C BF54x porting.
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27 18:38:12 +08:00
Bernd Schmidt fc97551db9 [Blackfin] arch: Add the semtimedop syscall. Upstream uClibc doesn't compile without it.
Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27 19:56:43 +08:00
Michael Hennerich a2c8cfef6a [Blackfin] arch: GPIO API cleanup and anomaly update
- Add anomaly workaround for bfin_gpio_reset_spi0_ssel1
 - Fix style
 - Update copyright
 - Remove BUG_ON checks for functions intended to be used only by arch
   support. GPIO users should only access using the generic GPIO API
 - Make all GPIO identifier unsigned int

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22 17:20:10 +08:00
Michael Hennerich acbcd26319 [Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with GENERIC_GPIO API interface
signef-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22 18:36:20 +08:00
Bernd Schmidt b97b8a9983 [Blackfin] arch: Initial checkin of the memory protection support.
Enable it with CONFIG_MPU.

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27 18:39:16 +08:00
Michael Hennerich 2047e40d72 [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-22 15:29:18 +08:00
Mike Frysinger 7cc1c4b2c4 [Blackfin] arch: update to latest anomaly sheets
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24 20:05:09 +08:00
Michael Hennerich fac3cf432e [Blackfin] arch: Fix gpio label handling
early serial init also utilizes the peripheral request api - however
at this point bfin_gpio_init didn't allocate memory for the labels.
So we always have two zombies (allocated pin functions without labels)

This happens before the initcalls - We now allocate memory statically.
Define MAX_RESOURCES individually for each cpu.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24 20:07:03 +08:00
Bernd Schmidt 3ca32c1dc6 [Blackfin] arch: fix up coding style in uaccess.h
Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24 12:40:29 +08:00
Sonic Zhang 971d5bc4e5 [Blackfin] arch: Fix bug to Enable bf548 to Re-program Clocks while Kernel boots.
Reprogram DDR EBIU register properly for bf548.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27 16:32:31 +08:00
Robin Getz b03b08ba9c [Blackfin] arch: Clean up dump_bfin_mem
Clean up dump_bfin_mem so that it will display
content from the kernel, as well as l1 instruction, when deferred
HW errors happen, print out the last frame info if it makes sense.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-23 22:57:01 +08:00
Sonic Zhang fb5f00492a [Blackfin] arch: Fix bug to Enable kernel to build for bf548 with PM.
On BF548-EZKIT, build kernel faills with power management, video and audio enabled.
This patch fix this.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-23 23:02:13 +08:00
Cliff Cai a5bb85dfff [Blackfin] arch: fix bug SDIO driver fails to build for BF542/BF548
modified CMD_TIMEOUT and DAT_TIMEOUT to CMD_TIME_OUT and DAT_TIME_OUT

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21 21:04:40 +08:00
Robin Getz 13fe24f37d [Blackfin] arch: fix bug - trap_tests fails to recover on some tests.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3719

When the CPLBs get a miss, we do:
  - find a victim in the HW table
  - remove the victim
  - find the replacement in the software table
  - put it into the HW table.

If we can't find a replacement in the software table, we accidently
leave a duplicate in the HW table. This patch ensures that duplicate
is marked as not valid.

What we should do is find the replacement in the software table, before
we find a victim in the HW table - but its too late in the release cycle
to do that much restructuring of this code.

Rather that duplicate code, connect Hardware Errors (irq5) into trap_c,
so user space processes get killed properly.

The rest of irq_panic() can be moved into traps.c (later)

There is still a small corner case that causes problems when a
pheriperal interrupt goes off a single cycle before a user space
hardware error. This causes a kernel panic, rather than the user
space process being killed.

But, this checkin makes things work in 99.9% of the cases, and is a vast
improvement from what is there today (which fails 100% of the time).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27 15:38:56 +08:00
Bryan Wu 003d922618 Blackfin SPI driver: move hard coded pin_req to board file
Remove some sort of bloaty code, try to get these pin_req arrays built at compile-time

 - move this static things to the blackfin board file
 - add pin_req array to struct bfin5xx_spi_master
 - tested on BF537/BF548 with SPI flash

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:20 -08:00
Bryan Wu 62310e51ac spi: spi_bfin: update handling of delay-after-deselect
Move cs_chg_udelay handling (specific to this driver) to cs_deactive(), fixing
a bug when some SPI LCD driver needs delay after cs_deactive.

Fix bug reported by Cameron Barfield <cbarfield@cyberdata.net>
https://blackfin.uclinux.org/gf/project/uclinux-dist/forum/?action=ForumBrowse&forum_id=39&_forum_action=ForumMessageBrowse&thread_id=23630&feedback=Message%20replied.

Cc: Cameron Barfield <cbarfield@cyberdata.net>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:20 -08:00
Michael Hennerich cc2f81a695 spi: bfin spi uses portmux calls
Use new Blackfin portmux interface, add error handling.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:19 -08:00
Bryan Wu 131b17d42d spi: initial BF54x SPI support
Initial BF54x SPI support

 - support BF54x SPI0
 - clean up some code (whitespace etc)
 - will support multiports in the future
 - start using portmux calls

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-05 09:21:19 -08:00
Mike Frysinger 49dce9124b Blackfin arch: split apart dump_bfin_regs and merge/remove show_regs from process.c, which was largely duplicated
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:46:49 +08:00
Robin Getz 569a50ca3f Blackfin arch: Ensure we printk out strings with the proper loglevel
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:35:57 +08:00
Mike Frysinger f26825de49 Blackfin arch: convert READY to DMA_READY as it causes build errors in common sound code otherwise
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:17:11 +08:00
Mike Frysinger b0187854d9 Blackfin arch: add defines for the on-chip L1 ROM of BF54x
Should not need separate cplb entry though as we cover L1 with a 4 meg page

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:14:03 +08:00
Mike Frysinger c3a9f435ae Blackfin arch: cplb and map header file cleanup
- remove duplicated defines for the BF561
 - generalize L2 support (so that it works for BF54x) and mark it executable
 - add support for reading/executing the Boot ROM sections
   (since it has data/functions we may need at runtime)
 - and fixup names for each map

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:12:12 +08:00
Mike Frysinger 81a487a59f Blackfin arch: cleanup the cplb declares
- no need to declare their sizes in the common header
 - no need to tack on the section attribute as only the definition matters, not references

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 15:55:45 +08:00
Mike Frysinger 9f2ff54d72 Blackfin arch: fix broken on BF52x, remove silly checks on processors for L1_SCRATCH defines
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 15:57:53 +08:00
Mike Frysinger 9e83b98a79 Blackfin arch: add support for working around anomaly 05000312
Anomaly 05000312 - Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted:

DESCRIPTION:
When instruction cache is enabled, erroneous behavior may occur when any of the following instructions are interrupted:

. CSYNC
• SSYNC
• LCx =
• LTx = (only when LCx is non-zero)
• LBx = (only when LCx is non-zero)

When this problem occurs, a variety of incorrect things could happen, including an illegal instruction exception. Additional errors could
show up as an exception, a hardware error, or an instruction that is valid but different than the one that was expected.

WORKAROUND:
Place a cli before all SSYNC, CSYNC, "LCx =", "LTx =", and "LBx =" instructions to disable interrupts, and place an sti after each of these
instructions to re-enable interrupts. When these instructions are executed in code that is already non-interruptible, the problem will not
occur.

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:08:58 +08:00
Mike Frysinger b5f87aa41d Blackfin arch: cleanup BF54x header file and add BF547 definition
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 16:04:49 +08:00
Mike Frysinger 8d6c242062 Blackfin arch: rename _return_from_exception to _bfin_return_from_exception and export it
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 15:53:49 +08:00
Mike Frysinger d0025e5edf Blackfin arch: move EXPORT_SYMBOL() to C files where the symbol is actually defined
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21 15:34:51 +08:00
Jie Zhang a961d65963 Blackfin arch: More explicitly describe what the instructions do in inline assembly.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18 00:00:10 +08:00
Michael Hennerich 5c91fb902d Blackfin arch: Add assembly function insl_16
/*
 * CPUs often take a performance hit when accessing unaligned memory
 * locations. The actual performance hit varies, it can be small if the
 * hardware handles it or large if we have to take an exception and fix
 * it
 * in software.
 *
 * Since an ethernet header is 14 bytes network drivers often end up
 * with
 * the IP header at an unaligned offset. The IP header can be aligned by
 * shifting the start of the packet by 2 bytes. Drivers should do this
 * with:
 *
 * skb_reserve(NET_IP_ALIGN);
 *
 * The downside to this alignment of the IP header is that the DMA is
 * now
 * unaligned. On some architectures the cost of an unaligned DMA is high
 * and this cost outweighs the gains made by aligning the IP header.
 *
 * Since this trade off varies between architectures, we allow
 * NET_IP_ALIGN
 * to be overridden.
 */

This new function insl_16 allows to read form 32-bit IO and writes to
16-bit aligned memory. This is useful in above described scenario -
In particular with the AXIS AX88180 Gigabit Ethernet MAC.
Once the device is in 32-bit mode, reads from the RX FIFO always
decrements 4bytes.
While on the other side the destination address in SDRAM is always
16-bit aligned.
If we use skb_reserve(0) the receive buffer is 32-bit aligned but later
we hit a unaligned exception in the IP code.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17 23:46:58 +08:00
Adrian Bunk 05c484355f Blackfin arch: remove dump_thread()
The only user is the a.out support.

It was therefore removed prior to the blackfin merge from all
architectures not supporting a.out.

Currently, Blackfin doesn't suppport a.out.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-18 00:41:56 +08:00
Mike Frysinger b33d518777 Blackfin arch: fix double fault definition for BF561 core A and core B
VDSP has double fault on core a/b inverted for BF561 -- bit 11 is core a while bit 12 is core b

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:15:47 +08:00
Mike Frysinger a055b2b4de Blackfin arch: remove useless CONFIG_IRQCHIP_DEMUX_GPIO
since we have this always turned on now and dont want it off (and hasnt been an option in a while)

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15 21:12:32 +08:00
Mike Frysinger 529a73fbae Blackfin arch: punt CONFIG_BFIN -- we already have CONFIG_BLACKFIN
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-23 14:28:44 +08:00
Mike Frysinger fa43cd8b10 Blackfin arch: add a compatible DOUBLE_FAULT define to enable resets on double faults in either core
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-13 00:31:33 +08:00
Mike Frysinger 2ea4649b36 Blackfin arch: use a less common define name in BF549
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-30 12:04:53 +08:00
Mike Frysinger 41241c17eb Blackfin arch: Add missing definitions for BF561
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-30 12:03:47 +08:00
Michael Hennerich be0f3131a9 Blackfin arch: Do not pollute name space used in linux-2.6.x/sound
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-30 11:53:55 +08:00
Robin Getz 9f336a5326 Blackfin arch: ensure that speculative loads of bad pointers don't cause us to do bad things.
Fix/change formatting of a few more things.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29 18:23:28 +08:00
Robin Getz 15b3ad6a4b Blackfin arch: Add missing definitions of BF54x
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29 18:17:07 +08:00
Mike Frysinger 4ad1ec7154 Blackfin arch: add support for checking/clearing overruns in generic purpose Timer API
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29 18:02:09 +08:00
Michael Hennerich 64307f7db3 Blackfin arch: add NFC driver support in BF527-EZKIT board
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29 16:55:18 +08:00
Jens Axboe 26da107848 blackfin: remove sg_address()
I would have replaced it with sg_virt(), but it doesn't appear to be
used at all.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 12:42:44 +02:00
Jens Axboe d6ec084200 Add CONFIG_DEBUG_SG sg validation
Add a Kconfig entry which will toggle some sanity checks on the sg
entry and tables.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:20:03 +02:00
Jens Axboe 18dabf473e Change table chaining layout
Change the page member of the scatterlist structure to be an unsigned
long, and encode more stuff in the lower bits:

- Bits 0 and 1 zero: this is a normal sg entry. Next sg entry is located
  at sg + 1.
- Bit 0 set: this is a chain entry, the next real entry is at ->page_link
  with the two low bits masked off.
- Bit 1 set: this is the final entry in the sg entry. sg_next() will return
  NULL when passed such an entry.

It's thus important that sg table users use the proper accessors to get
and set the page member.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:20:01 +02:00
Bryan Wu 452af71f36 Blackfin arch: dma add some API and cleanup bf54x DMA definition
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-22 00:02:14 +08:00
Mike Frysinger 780431e397 Blackfin arch: cleanup and promote the general purpose timers api to a core blackfin component
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21 23:37:54 +08:00
Mike Frysinger 2f6cf7bfc6 Blackfin arch: add functions for converting between sclks and usecs
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21 22:59:49 +08:00