Commit Graph

587 Commits

Author SHA1 Message Date
Kirill A. Shutemov 4595ef88d1 shmem: make shmem_inode_info::lock irq-safe
We are going to need to call shmem_charge() under tree_lock to get
accoutning right on collapse of small tmpfs pages into a huge one.

The problem is that tree_lock is irq-safe and lockdep is not happy, that
we take irq-unsafe lock under irq-safe[1].

Let's convert the lock to irq-safe.

[1] https://gist.github.com/kiryl/80c0149e03ed35dfaf26628b8e03cdbc

Link: http://lkml.kernel.org/r/1466021202-61880-34-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 16:19:19 -07:00
Hugh Dickins c01d5b3007 shmem: get_unmapped_area align huge page
Provide a shmem_get_unmapped_area method in file_operations, called at
mmap time to decide the mapping address.  It could be conditional on
CONFIG_TRANSPARENT_HUGEPAGE, but save #ifdefs in other places by making
it unconditional.

shmem_get_unmapped_area() first calls the usual mm->get_unmapped_area
(which we treat as a black box, highly dependent on architecture and
config and executable layout).  Lots of conditions, and in most cases it
just goes with the address that chose; but when our huge stars are
rightly aligned, yet that did not provide a suitable address, go back to
ask for a larger arena, within which to align the mapping suitably.

There have to be some direct calls to shmem_get_unmapped_area(), not via
the file_operations: because of the way shmem_zero_setup() is called to
create a shmem object late in the mmap sequence, when MAP_SHARED is
requested with MAP_ANONYMOUS or /dev/zero.  Though this only matters
when /proc/sys/vm/shmem_huge has been set.

Link: http://lkml.kernel.org/r/1466021202-61880-29-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 16:19:19 -07:00
Peter Zijlstra be3e784498 locking/spinlock: Update spin_unlock_wait() users
With the modified semantics of spin_unlock_wait() a number of
explicit barriers can be removed. Also update the comment for the
do_exit() usecase, as that was somewhat stale/obscure.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-14 11:55:15 +02:00
Peter Zijlstra 33ac279677 locking/barriers: Introduce smp_acquire__after_ctrl_dep()
Introduce smp_acquire__after_ctrl_dep(), this construct is not
uncommon, but the lack of this barrier is.

Use it to better express smp_rmb() uses in WRITE_ONCE(), the IPC
semaphore code and the qspinlock code.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-14 11:55:14 +02:00
Michal Hocko 91f4f94ea3 ipc, shm: make shmem attach/detach wait for mmap_sem killable
shmat and shmdt rely on mmap_sem for write.  If the waiting task gets
killed by the oom killer it would block oom_reaper from asynchronous
address space reclaim and reduce the chances of timely OOM resolving.
Wait for the lock in the killable mode and return with EINTR if the task
got killed while waiting.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Davidlohr Bueso a5f4db8771 ipc/sem: make semctl setting sempid consistent
As indicated by bug#112271, Linux sets the sempid value upon semctl, and
not only for semop calls.  However, within semctl we only do this for
SETVAL, leaving SETALL without updating the field, and therefore rather
inconsistent behavior when compared to other Unices.

There is really no documentation regarding this and therefore users
should not make assumptions.  With this patch, along with updating
semctl.2 manpages, this scenario should become less ambiguous As such,
set sempid on SETALL cmd.

Also update some in-code documentation, specifying where the sempid is
set.

Passes ltp and custom testcase where a child (fork) does SETALL to the
set.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Philip Semanchuk <linux_kernel.20.ick@spamgourmet.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Herton R. Krzesinski <herton@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Kirill A. Shutemov 1ac0b6dec6 ipc/shm: handle removed segments gracefully in shm_mmap()
remap_file_pages(2) emulation can reach file which represents removed
IPC ID as long as a memory segment is mapped.  It breaks expectations of
IPC subsystem.

Test case (rewritten to be more human readable, originally autogenerated
by syzkaller[1]):

	#define _GNU_SOURCE
	#include <stdlib.h>
	#include <sys/ipc.h>
	#include <sys/mman.h>
	#include <sys/shm.h>

	#define PAGE_SIZE 4096

	int main()
	{
		int id;
		void *p;

		id = shmget(IPC_PRIVATE, 3 * PAGE_SIZE, 0);
		p = shmat(id, NULL, 0);
		shmctl(id, IPC_RMID, NULL);
		remap_file_pages(p, 3 * PAGE_SIZE, 0, 7, 0);

	        return 0;
	}

The patch changes shm_mmap() and code around shm_lock() to propagate
locking error back to caller of shm_mmap().

[1] http://github.com/google/syzkaller

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-18 16:23:24 -08:00
Linus Torvalds cc673757e2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull final vfs updates from Al Viro:

 - The ->i_mutex wrappers (with small prereq in lustre)

 - a fix for too early freeing of symlink bodies on shmem (they need to
   be RCU-delayed) (-stable fodder)

 - followup to dedupe stuff merged this cycle

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: abort dedupe loop if fatal signals are pending
  make sure that freeing shmem fast symlinks is RCU-delayed
  wrappers for ->i_mutex access
  lustre: remove unused declaration
2016-01-23 12:24:56 -08:00
Tetsuo Handa 1d5cfdb076 tree wide: use kvfree() than conditional kfree()/vfree()
There are many locations that do

  if (memory_was_allocated_by_vmalloc)
    vfree(ptr);
  else
    kfree(ptr);

but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr().  Unless callers have special reasons, we can
replace this branch with kvfree().  Please check and reply if you found
problems.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-22 17:02:18 -08:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Yaowei Bai 2954e440be ipc/shm.c: is_file_shm_hugepages() can be boolean
Make is_file_shm_hugepages() return bool to improve readability due to
this particular function only using either one or zero as its return
value.

No functional change.

Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Vladimir Davydov 5d097056c9 kmemcg: account certain kmem allocations to memcg
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg.  For the list, see below:

 - threadinfo
 - task_struct
 - task_delay_info
 - pid
 - cred
 - mm_struct
 - vm_area_struct and vm_region (nommu)
 - anon_vma and anon_vma_chain
 - signal_struct
 - sighand_struct
 - fs_struct
 - files_struct
 - fdtable and fdtable->full_fds_bits
 - dentry and external_name
 - inode for all filesystems. This is the most tedious part, because
   most filesystems overwrite the alloc_inode method.

The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds.  Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14 16:00:49 -08:00
Davidlohr Bueso 5f2a2d5d42 ipc,msg: drop dst nil validation in copy_msg
d0edd85283 ("ipc: convert invalid scenarios to use WARN_ON") relaxed the
nil dst parameter check, originally being a full BUG_ON.  However, this
check seems quite unnecessary when the only purpose is for
ceckpoint/restore (MSG_COPY flag):

o The copy variable is set initially to nil, apparently as a way of
  ensuring that prepare_copy is previously called.  Which is in fact done,
  unconditionally at the beginning of do_msgrcv.

o There is no concurrency with 'copy' (stack allocated in do_msgrcv).

Furthermore, any errors in 'copy' (and thus prepare_copy/copy_msg) should
always handled by IS_ERR() family.  Therefore remove this check altogether
as it can never occur with the current users.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Linus Torvalds b9a5322779 Initialize msg/shm IPC objects before doing ipc_addid()
As reported by Dmitry Vyukov, we really shouldn't do ipc_addid() before
having initialized the IPC object state.  Yes, we initialize the IPC
object in a locked state, but with all the lockless RCU lookup work,
that IPC object lock no longer means that the state cannot be seen.

We already did this for the IPC semaphore code (see commit e8577d1f0329:
"ipc/sem.c: fully initialize sem_array before making it visible") but we
clearly forgot about msg and shm.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-30 12:48:40 -04:00
Davidlohr Bueso d0edd85283 ipc: convert invalid scenarios to use WARN_ON
Considering Linus' past rants about the (ab)use of BUG in the kernel, I
took a look at how we deal with such calls in ipc.  Given that any errors
or corruption in ipc code are most likely contained within the set of
processes participating in the broken mechanisms, there aren't really many
strong fatal system failure scenarios that would require a BUG call.
Also, if something is seriously wrong, ipc might not be the place for such
a BUG either.

1. For example, recently, a customer hit one of these BUG_ONs in shm
   after failing shm_lock().  A busted ID imho does not merit a BUG_ON,
   and WARN would have been better.

2. MSG_COPY functionality of posix msgrcv(2) for checkpoint/restore.
   I don't see how we can hit this anyway -- at least it should be IS_ERR.
    The 'copy' arg from do_msgrcv is always set by calling prepare_copy()
   first and foremost.  We could also probably drop this check altogether.
    Either way, it does not merit a BUG_ON.

3. No ->fault() callback for the fs getting the corresponding page --
   seems selfish to make the system unusable.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10 13:29:01 -07:00
Manfred Spraul 3ed1f8a99d ipc/sem.c: update/correct memory barriers
sem_lock() did not properly pair memory barriers:

!spin_is_locked() and spin_unlock_wait() are both only control barriers.
The code needs an acquire barrier, otherwise the cpu might perform read
operations before the lock test.

As no primitive exists inside <include/spinlock.h> and since it seems
noone wants another primitive, the code creates a local primitive within
ipc/sem.c.

With regards to -stable:

The change of sem_wait_array() is a bugfix, the change to sem_lock() is a
nop (just a preprocessor redefinition to improve the readability).  The
bugfix is necessary for all kernels that use sem_wait_array() (i.e.:
starting from 3.10).

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>	[3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-14 15:56:32 -07:00
Herton R. Krzesinski a979558448 ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()
After we acquire the sma->sem_perm lock in exit_sem(), we are protected
against a racing IPC_RMID operation.  Also at that point, we are the last
user of sem_undo_list.  Therefore it isn't required that we acquire or use
ulp->lock.

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rafael Aquini <aquini@redhat.com>
CC: Aristeu Rozanski <aris@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-14 15:56:32 -07:00
Herton R. Krzesinski 602b8593d2 ipc,sem: fix use after free on IPC_RMID after a task using same semaphore set exits
The current semaphore code allows a potential use after free: in
exit_sem we may free the task's sem_undo_list while there is still
another task looping through the same semaphore set and cleaning the
sem_undo list at freeary function (the task called IPC_RMID for the same
semaphore set).

For example, with a test program [1] running which keeps forking a lot
of processes (which then do a semop call with SEM_UNDO flag), and with
the parent right after removing the semaphore set with IPC_RMID, and a
kernel built with CONFIG_SLAB, CONFIG_SLAB_DEBUG and
CONFIG_DEBUG_SPINLOCK, you can easily see something like the following
in the kernel log:

   Slab corruption (Not tainted): kmalloc-64 start=ffff88003b45c1c0, len=64
   000: 6b 6b 6b 6b 6b 6b 6b 6b 00 6b 6b 6b 6b 6b 6b 6b  kkkkkkkk.kkkkkkk
   010: ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff  ....kkkk........
   Prev obj: start=ffff88003b45c180, len=64
   000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
   010: ff ff ff ff ff ff ff ff c0 fb 01 37 00 88 ff ff  ...........7....
   Next obj: start=ffff88003b45c200, len=64
   000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
   010: ff ff ff ff ff ff ff ff 68 29 a7 3c 00 88 ff ff  ........h).<....
   BUG: spinlock wrong CPU on CPU#2, test/18028
   general protection fault: 0000 [#1] SMP
   Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib]
   CPU: 2 PID: 18028 Comm: test Not tainted 4.2.0-rc5+ #1
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
   RIP: spin_dump+0x53/0xc0
   Call Trace:
     spin_bug+0x30/0x40
     do_raw_spin_unlock+0x71/0xa0
     _raw_spin_unlock+0xe/0x10
     freeary+0x82/0x2a0
     ? _raw_spin_lock+0xe/0x10
     semctl_down.clone.0+0xce/0x160
     ? __do_page_fault+0x19a/0x430
     ? __audit_syscall_entry+0xa8/0x100
     SyS_semctl+0x236/0x2c0
     ? syscall_trace_leave+0xde/0x130
     entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 8b 80 88 03 00 00 48 8d 88 60 05 00 00 48 c7 c7 a0 2c a4 81 31 c0 65 8b 15 eb 40 f3 7e e8 08 31 68 00 4d 85 e4 44 8b 4b 08 74 5e <45> 8b 84 24 88 03 00 00 49 8d 8c 24 60 05 00 00 8b 53 04 48 89
   RIP  [<ffffffff810d6053>] spin_dump+0x53/0xc0
    RSP <ffff88003750fd68>
   ---[ end trace 783ebb76612867a0 ]---
   NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [test:18053]
   Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib]
   CPU: 3 PID: 18053 Comm: test Tainted: G      D         4.2.0-rc5+ #1
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
   RIP: native_read_tsc+0x0/0x20
   Call Trace:
     ? delay_tsc+0x40/0x70
     __delay+0xf/0x20
     do_raw_spin_lock+0x96/0x140
     _raw_spin_lock+0xe/0x10
     sem_lock_and_putref+0x11/0x70
     SYSC_semtimedop+0x7bf/0x960
     ? handle_mm_fault+0xbf6/0x1880
     ? dequeue_task_fair+0x79/0x4a0
     ? __do_page_fault+0x19a/0x430
     ? kfree_debugcheck+0x16/0x40
     ? __do_page_fault+0x19a/0x430
     ? __audit_syscall_entry+0xa8/0x100
     ? do_audit_syscall_entry+0x66/0x70
     ? syscall_trace_enter_phase1+0x139/0x160
     SyS_semtimedop+0xe/0x10
     SyS_semop+0x10/0x20
     entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 47 10 83 e8 01 85 c0 89 47 10 75 08 65 48 89 3d 1f 74 ff 7e c9 c3 0f 1f 44 00 00 55 48 89 e5 e8 87 17 04 00 66 90 c9 c3 0f 1f 00 <55> 48 89 e5 0f 31 89 c1 48 89 d0 48 c1 e0 20 89 c9 48 09 c8 c9
   Kernel panic - not syncing: softlockup: hung tasks

I wasn't able to trigger any badness on a recent kernel without the
proper config debugs enabled, however I have softlockup reports on some
kernel versions, in the semaphore code, which are similar as above (the
scenario is seen on some servers running IBM DB2 which uses semaphore
syscalls).

The patch here fixes the race against freeary, by acquiring or waiting
on the sem_undo_list lock as necessary (exit_sem can race with freeary,
while freeary sets un->semid to -1 and removes the same sem_undo from
list_proc or when it removes the last sem_undo).

After the patch I'm unable to reproduce the problem using the test case
[1].

[1] Test case used below:

    #include <stdio.h>
    #include <sys/types.h>
    #include <sys/ipc.h>
    #include <sys/sem.h>
    #include <sys/wait.h>
    #include <stdlib.h>
    #include <time.h>
    #include <unistd.h>
    #include <errno.h>

    #define NSEM 1
    #define NSET 5

    int sid[NSET];

    void thread()
    {
            struct sembuf op;
            int s;
            uid_t pid = getuid();

            s = rand() % NSET;
            op.sem_num = pid % NSEM;
            op.sem_op = 1;
            op.sem_flg = SEM_UNDO;

            semop(sid[s], &op, 1);
            exit(EXIT_SUCCESS);
    }

    void create_set()
    {
            int i, j;
            pid_t p;
            union {
                    int val;
                    struct semid_ds *buf;
                    unsigned short int *array;
                    struct seminfo *__buf;
            } un;

            /* Create and initialize semaphore set */
            for (i = 0; i < NSET; i++) {
                    sid[i] = semget(IPC_PRIVATE , NSEM, 0644 | IPC_CREAT);
                    if (sid[i] < 0) {
                            perror("semget");
                            exit(EXIT_FAILURE);
                    }
            }
            un.val = 0;
            for (i = 0; i < NSET; i++) {
                    for (j = 0; j < NSEM; j++) {
                            if (semctl(sid[i], j, SETVAL, un) < 0)
                                    perror("semctl");
                    }
            }

            /* Launch threads that operate on semaphore set */
            for (i = 0; i < NSEM * NSET * NSET; i++) {
                    p = fork();
                    if (p < 0)
                            perror("fork");
                    if (p == 0)
                            thread();
            }

            /* Free semaphore set */
            for (i = 0; i < NSET; i++) {
                    if (semctl(sid[i], NSEM, IPC_RMID))
                            perror("IPC_RMID");
            }

            /* Wait for forked processes to exit */
            while (wait(NULL)) {
                    if (errno == ECHILD)
                            break;
            };
    }

    int main(int argc, char **argv)
    {
            pid_t p;

            srand(time(NULL));

            while (1) {
                    p = fork();
                    if (p < 0) {
                            perror("fork");
                            exit(EXIT_FAILURE);
                    }
                    if (p == 0) {
                            create_set();
                            goto end;
                    }

                    /* Wait for forked processes to exit */
                    while (wait(NULL)) {
                            if (errno == ECHILD)
                                    break;
                    };
            }
    end:
            return 0;
    }

[akpm@linux-foundation.org: use normal comment layout]
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rafael Aquini <aquini@redhat.com>
CC: Aristeu Rozanski <aris@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-14 15:56:32 -07:00
Stephen Smalley e1832f2923 ipc: use private shmem or hugetlbfs inodes for shm segments.
The shm implementation internally uses shmem or hugetlbfs inodes for shm
segments.  As these inodes are never directly exposed to userspace and
only accessed through the shm operations which are already hooked by
security modules, mark the inodes with the S_PRIVATE flag so that inode
security initialization and permission checking is skipped.

This was motivated by the following lockdep warning:

  ======================================================
   [ INFO: possible circular locking dependency detected ]
   4.2.0-0.rc3.git0.1.fc24.x86_64+debug #1 Tainted: G        W
  -------------------------------------------------------
   httpd/1597 is trying to acquire lock:
   (&ids->rwsem){+++++.}, at: shm_close+0x34/0x130
   but task is already holding lock:
   (&mm->mmap_sem){++++++}, at: SyS_shmdt+0x4b/0x180
   which lock already depends on the new lock.
   the existing dependency chain (in reverse order) is:
   -> #3 (&mm->mmap_sem){++++++}:
        lock_acquire+0xc7/0x270
        __might_fault+0x7a/0xa0
        filldir+0x9e/0x130
        xfs_dir2_block_getdents.isra.12+0x198/0x1c0 [xfs]
        xfs_readdir+0x1b4/0x330 [xfs]
        xfs_file_readdir+0x2b/0x30 [xfs]
        iterate_dir+0x97/0x130
        SyS_getdents+0x91/0x120
        entry_SYSCALL_64_fastpath+0x12/0x76
   -> #2 (&xfs_dir_ilock_class){++++.+}:
        lock_acquire+0xc7/0x270
        down_read_nested+0x57/0xa0
        xfs_ilock+0x167/0x350 [xfs]
        xfs_ilock_attr_map_shared+0x38/0x50 [xfs]
        xfs_attr_get+0xbd/0x190 [xfs]
        xfs_xattr_get+0x3d/0x70 [xfs]
        generic_getxattr+0x4f/0x70
        inode_doinit_with_dentry+0x162/0x670
        sb_finish_set_opts+0xd9/0x230
        selinux_set_mnt_opts+0x35c/0x660
        superblock_doinit+0x77/0xf0
        delayed_superblock_init+0x10/0x20
        iterate_supers+0xb3/0x110
        selinux_complete_init+0x2f/0x40
        security_load_policy+0x103/0x600
        sel_write_load+0xc1/0x750
        __vfs_write+0x37/0x100
        vfs_write+0xa9/0x1a0
        SyS_write+0x58/0xd0
        entry_SYSCALL_64_fastpath+0x12/0x76
  ...

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Reported-by: Morten Stevens <mstevens@fedoraproject.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-07 04:39:41 +03:00
Marcus Gelderie de54b9ac25 ipc: modify message queue accounting to not take kernel data structures into account
A while back, the message queue implementation in the kernel was
improved to use btrees to speed up retrieval of messages, in commit
d6629859b3 ("ipc/mqueue: improve performance of send/recv").

That patch introducing the improved kernel handling of message queues
(using btrees) has, as a by-product, changed the meaning of the QSIZE
field in the pseudo-file created for the queue.  Before, this field
reflected the size of the user-data in the queue.  Since, it also takes
kernel data structures into account.  For example, if 13 bytes of user
data are in the queue, on my machine the file reports a size of 61
bytes.

There was some discussion on this topic before (for example
https://lkml.org/lkml/2014/10/1/115).  Commenting on a th lkml, Michael
Kerrisk gave the following background
(https://lkml.org/lkml/2015/6/16/74):

    The pseudofiles in the mqueue filesystem (usually mounted at
    /dev/mqueue) expose fields with metadata describing a message
    queue. One of these fields, QSIZE, as originally implemented,
    showed the total number of bytes of user data in all messages in
    the message queue, and this feature was documented from the
    beginning in the mq_overview(7) page. In 3.5, some other (useful)
    work happened to break the user-space API in a couple of places,
    including the value exposed via QSIZE, which now includes a measure
    of kernel overhead bytes for the queue, a figure that renders QSIZE
    useless for its original purpose, since there's no way to deduce
    the number of overhead bytes consumed by the implementation.
    (The other user-space breakage was subsequently fixed.)

This patch removes the accounting of kernel data structures in the
queue.  Reporting the size of these data-structures in the QSIZE field
was a breaking change (see Michael's comment above).  Without the QSIZE
field reporting the total size of user-data in the queue, there is no
way to deduce this number.

It should be noted that the resource limit RLIMIT_MSGQUEUE is counted
against the worst-case size of the queue (in both the old and the new
implementation).  Therefore, the kernel overhead accounting in QSIZE is
not necessary to help the user understand the limitations RLIMIT imposes
on the processes.

Signed-off-by: Marcus Gelderie <redmnic@gmail.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: John Duffy <jb_duffy@btinternet.com>
Cc: Arto Bendiken <arto@bendiken.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-07 04:39:39 +03:00
Davidlohr Bueso 6157dbbfbf ipc,sysv: return -EINVAL upon incorrect id/seqnum
In ipc_obtain_object_check we return -EIDRM when a bogus sequence number
is detected via ipc_checkid, while the ipc manpages state the following
return codes for such errors:

   EIDRM  <ID> points to a removed identifier.
   EINVAL Invalid <ID> value, or unaligned, etc.

EIDRM should only be returned upon a RMID call (->deleted check), and thus
return EINVAL for wrong seq.  This difference in semantics has also caused
real bugs, ie: https://bugzilla.redhat.com/show_bug.cgi?id=246509

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:59 -07:00
Davidlohr Bueso f8b5918495 ipc,sysv: make return -EIDRM when racing with RMID consistent
The ipc_lock helper is used by all forms of sysv ipc to acquire the ipc
object's spinlock.  Upon error (bogus identifier), we always return
-EINVAL, whether the problem be in the idr path or because we raced with a
task performing RMID.  For the later, however, all ipc related manpages,
state the that for:

       EIDRM  <ID> points to a removed identifier.

And return:

       EINVAL Invalid <ID> value, or unaligned, etc.

Which (EINVAL) should only return once the ipc resource is deleted.  For
all types of ipc this is done immediately upon a RMID command.  However,
shared memory behaves slightly different as it can merely mark a segment
for deletion, and delay the actual freeing until there are no more active
consumers.  Per shmctl(IPC_RMID) manpage:

""
Mark  the  segment to be destroyed.  The segment will only actually
be destroyed after the last process detaches it (i.e., when the
shm_nattch member of the associated structure shmid_ds is zero).
""

Unlike ipc_lock, paths that behave "correctly", at least per the manpage,
involve controlling the ipc resource via *ctl(), doing the exact same
validity check as ipc_lock after right acquiring the spinlock:

	if (!ipc_valid_object()) {
		err = -EIDRM;
		goto out_unlock;
	}

Thus make ipc_lock consistent with the rest of ipc code and return -EIDRM
in ipc_lock when !ipc_valid_object().

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:59 -07:00
Davidlohr Bueso 55b7ae5016 ipc: rename ipc_obtain_object
...  to ipc_obtain_object_idr, which is more meaningful and makes the code
slightly easier to follow.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:58 -07:00
Davidlohr Bueso ff35e5ef86 ipc,msg: provide barrier pairings for lockless receive
We currently use a full barrier on the sender side to to avoid receiver
tasks disappearing on us while still performing on the sender side wakeup.
 We lack however, the proper CPU-CPU interactions pairing on the receiver
side which busy-waits for the message.  Similarly, we do not need a full
smp_mb, and can relax the semantics for the writer and reader sides of the
message.  This is safe as we are only ordering loads and stores to r_msg.
And in both smp_wmb and smp_rmb, there are no stores after the calls
_anyway_.

This obviously applies for pipelined_send and expunge_all, for EIRDM when
destroying a queue.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:58 -07:00
Davidlohr Bueso c5c8975b2e ipc,shm: move BUG_ON check into shm_lock
Upon every shm_lock call, we BUG_ON if an error was returned, indicating
racing either in idr or in shm_destroy.  Move this logic into the locking.

[akpm@linux-foundation.org: simplify code]
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:58 -07:00
Pekka Enberg c859aa8311 ipc/util.c: use kvfree() in ipc_rcu_free()
Use kvfree() instead of open-coding it.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:58 -07:00
Davidlohr Bueso fa6004ad45 ipc/mqueue: Implement lockless pipelined wakeups
This patch moves the wakeup_process() invocation so it is not done under
the info->lock by making use of a lockless wake_q. With this change, the
waiter is woken up once it is STATE_READY and it does not need to loop
on SMP if it is still in STATE_PENDING. In the timeout case we still need
to grab the info->lock to verify the state.

This change should also avoid the introduction of preempt_disable() in -rt
which avoids a busy-loop which pools for the STATE_PENDING -> STATE_READY
change if the waiter has a higher priority compared to the waker.

Additionally, this patch micro-optimizes wq_sleep by using the cheaper
cousin of set_current_state(TASK_INTERRUPTABLE) as we will block no
matter what, thus get rid of the implied barrier.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: George Spelvin <linux@horizon.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Mason <clm@fb.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: dave@stgolabs.net
Link: http://lkml.kernel.org/r/1430748166.1940.17.camel@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-08 12:23:07 +02:00
Linus Torvalds 9ec3a646fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26 17:22:07 -07:00
Joe Perches 7f032d6ef6 ipc: remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:24 -07:00
David Howells 75c3cfa855 VFS: assorted weird filesystems: d_inode() annotations
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:58 -04:00
Davidlohr Bueso 52644c9ab3 ipc,sem: use current->state helpers
Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping
track of who changed the state.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17 14:34:55 -08:00
Linus Torvalds 603ba7e41b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile #2 from Al Viro:
 "Next pile (and there'll be one or two more).

  The large piece in this one is getting rid of /proc/*/ns/* weirdness;
  among other things, it allows to (finally) make nameidata completely
  opaque outside of fs/namei.c, making for easier further cleanups in
  there"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  coda_venus_readdir(): use file_inode()
  fs/namei.c: fold link_path_walk() call into path_init()
  path_init(): don't bother with LOOKUP_PARENT in argument
  fs/namei.c: new helper (path_cleanup())
  path_init(): store the "base" pointer to file in nameidata itself
  make default ->i_fop have ->open() fail with ENXIO
  make nameidata completely opaque outside of fs/namei.c
  kill proc_ns completely
  take the targets of /proc/*/ns/* symlinks to separate fs
  bury struct proc_ns in fs/proc
  copy address of proc_ns_ops into ns_common
  new helpers: ns_alloc_inum/ns_free_inum
  make proc_ns_operations work with struct ns_common * instead of void *
  switch the rest of proc_ns_operations to working with &...->ns
  netns: switch ->get()/->put()/->install()/->inum() to working with &net->ns
  make mntns ->get()/->put()/->install()/->inum() work with &mnt_ns->ns
  common object embedded into various struct ....ns
2014-12-16 15:53:03 -08:00
Dave Hansen 07a46ed27d shmdt: use i_size_read() instead of ->i_size
Andrew Morton noted

	http://lkml.kernel.org/r/20141104142027.a7a0d010772d84560b445f59@linux-foundation.org

that the shmdt uses inode->i_size outside of i_mutex being held.
There is one more case in shm.c in shm_destroy().  This converts
both users over to use i_size_read().

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:52 -08:00
Dave Hansen d3c97900b4 ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments
This is a highly-contrived scenario.  But, a single shmdt() call can be
induced in to unmapping memory from mulitple shm segments.  Example code
is here:

	http://www.sr71.net/~dave/intel/shmfun.c

The fix is pretty simple: Record the 'struct file' for the first VMA we
encounter and then stick to it.  Decline to unmap anything not from the
same file and thus the same segment.

I found this by inspection and the odds of anyone hitting this in practice
are pretty darn small.

Lightly tested, but it's a pretty small patch.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:52 -08:00
Manfred Spraul 0050ee059f ipc/msg: increase MSGMNI, remove scaling
SysV can be abused to allocate locked kernel memory.  For most systems, a
small limit doesn't make sense, see the discussion with regards to SHMMAX.

Therefore: increase MSGMNI to the maximum supported.

And: If we ignore the risk of locking too much memory, then an automatic
scaling of MSGMNI doesn't make sense.  Therefore the logic can be removed.

The code preserves auto_msgmni to avoid breaking any user space applications
that expect that the value exists.

Notes:
1) If an administrator must limit the memory allocations, then he can set
MSGMNI as necessary.

Or he can disable sysv entirely (as e.g. done by Android).

2) MSGMAX and MSGMNB are intentionally not increased, as these values are used
to control latency vs. throughput:
If MSGMNB is large, then msgsnd() just returns and more messages can be queued
before a task switch to a task that calls msgrcv() is forced.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:52 -08:00
Manfred Spraul 2e094abfd1 ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
When I fixed bugs in the sem_lock() logic, I was more conservative than
necessary.  Therefore it is safe to replace the smp_mb() with smp_rmb().
And: With smp_rmb(), semop() syscalls are up to 10% faster.

The race we must protect against is:

	sem->lock is free
	sma->complex_count = 0
	sma->sem_perm.lock held by thread B

thread A:

A: spin_lock(&sem->lock)

			B: sma->complex_count++; (now 1)
			B: spin_unlock(&sma->sem_perm.lock);

A: spin_is_locked(&sma->sem_perm.lock);
A: XXXXX memory barrier
A: if (sma->complex_count == 0)

Thread A must read the increased complex_count value, i.e. the read must
not be reordered with the read of sem_perm.lock done by spin_is_locked().

Since it's about ordering of reads, smp_rmb() is sufficient.

[akpm@linux-foundation.org: update sem_lock() comment, from Davidlohr]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:52 -08:00
Al Viro 707c5960f1 Merge branch 'nsfs' into for-next 2014-12-10 21:31:59 -05:00
Linus Torvalds cbfe0de303 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS changes from Al Viro:
 "First pile out of several (there _definitely_ will be more).  Stuff in
  this one:

   - unification of d_splice_alias()/d_materialize_unique()

   - iov_iter rewrite

   - killing a bunch of ->f_path.dentry users (and f_dentry macro).

     Getting that completed will make life much simpler for
     unionmount/overlayfs, since then we'll be able to limit the places
     sensitive to file _dentry_ to reasonably few.  Which allows to have
     file_inode(file) pointing to inode in a covered layer, with dentry
     pointing to (negative) dentry in union one.

     Still not complete, but much closer now.

   - crapectomy in lustre (dead code removal, mostly)

   - "let's make seq_printf return nothing" preparations

   - assorted cleanups and fixes

  There _definitely_ will be more piles"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  copy_from_iter_nocache()
  new helper: iov_iter_kvec()
  csum_and_copy_..._iter()
  iov_iter.c: handle ITER_KVEC directly
  iov_iter.c: convert copy_to_iter() to iterate_and_advance
  iov_iter.c: convert copy_from_iter() to iterate_and_advance
  iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
  iov_iter.c: convert iov_iter_zero() to iterate_and_advance
  iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
  iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
  iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
  iov_iter.c: iterate_and_advance
  iov_iter.c: macros for iterating over iov_iter
  kill f_dentry macro
  dcache: fix kmemcheck warning in switch_names
  new helper: audit_file()
  nfsd_vfs_write(): use file_inode()
  ncpfs: use file_inode()
  kill f_dentry uses
  lockd: get rid of ->f_path.dentry->d_sb
  ...
2014-12-10 16:10:49 -08:00
Al Viro 33c429405a copy address of proc_ns_ops into ns_common
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:47 -05:00
Al Viro 6344c433a4 new helpers: ns_alloc_inum/ns_free_inum
take struct ns_common *, for now simply wrappers around proc_{alloc,free}_inum()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:36 -05:00
Al Viro 64964528b2 make proc_ns_operations work with struct ns_common * instead of void *
We can do that now.  And kill ->inum(), while we are at it - all instances
are identical.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:17 -05:00
Al Viro 3c04118461 switch the rest of proc_ns_operations to working with &...->ns
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:34:11 -05:00
Al Viro 435d5f4bb2 common object embedded into various struct ....ns
for now - just move corresponding ->proc_inum instances over there

Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-04 14:31:00 -05:00
Manfred Spraul e8577d1f03 ipc/sem.c: fully initialize sem_array before making it visible
ipc_addid() makes a new ipc identifier visible to everyone.  New objects
start as locked, so that the caller can complete the initialization
after the call.  Within struct sem_array, at least sma->sem_base and
sma->sem_nsems are accessed without any locks, therefore this approach
doesn't work.

Thus: Move the ipc_addid() to the end of the initialization.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Rik van Riel <riel@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-03 09:36:03 -08:00
Al Viro 9f45f5bf30 new helper: audit_file()
... for situations when we don't have any candidate in pathnames - basically,
in descriptor-based syscalls.

[Folded the build fix for !CONFIG_AUDITSYSCALL configs from Chen Gang]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-19 13:01:26 -05:00
Mark Rustad 0d5e75802c ipc: resolve shadow warnings
Resolve some shadow warnings produced in W=2 builds by changing the name
of some parameters and local variables.  Change instances of "s64"
because that clashes with the well-known typedef.  Also change a local
variable with the name "up" because that clashes with the name of of the
"up" function for semaphores.  These are hazards so eliminate the
hazards by renaming them.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:23 +02:00
Rob Jones d66a0520cb ipc/util.c: use __seq_open_private() instead of seq_open()
Using __seq_open_private() removes boilerplate code from
sysvipc_proc_open().

The resultant code is shorter and easier to follow.

However, please note that __seq_open_private() call kzalloc() rather than
kmalloc() which may affect timing due to the memory initialisation
overhead.

Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:23 +02:00
Oleg Nesterov bf77b94c99 ipc/shm: kill the historical/wrong mm->start_stack check
do_shmat() is the only user of ->start_stack (proc just reports its
value), and this check looks ugly and wrong.

The reason for this check is not clear at all, and it wrongly assumes that
the stack can only grow down.

But the main problem is that in general mm->start_stack has nothing to do
with stack_vma->vm_start.  Not only the application can switch to another
stack and even unmap this area, setup_arg_pages() expands the stack
without updating mm->start_stack during exec().  This means that in the
likely case "addr > start_stack - size - PAGE_SIZE * 5" is simply
impossible after find_vma_intersection() == F, or the stack can't grow
anyway because of RLIMIT_STACK.

Many thanks to Hugh for his explanations.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:23 +02:00
Andrey Vagin 1195d94e00 ipc: always handle a new value of auto_msgmni
proc_dointvec_minmax() returns zero if a new value has been set.  So we
don't need to check all charecters have been handled.

Below you can find two examples.  In the new value has not been handled
properly.

$ strace ./a.out
open("/proc/sys/kernel/auto_msgmni", O_WRONLY) = 3
write(3, "0\n\0", 3)                    = 2
close(3)                                = 0
exit_group(0)
$ cat /sys/kernel/debug/tracing/trace

$strace ./a.out
open("/proc/sys/kernel/auto_msgmni", O_WRONLY) = 3
write(3, "0\n", 2)                      = 2
close(3)                                = 0

$ cat /sys/kernel/debug/tracing/trace
a.out-697   [000] ....  3280.998235: unregister_ipcns_notifier <-proc_ipcauto_dointvec_minmax

Fixes: 9eefe520c8 ("ipc: do not use a negative value to re-enable msgmni automatic recomputin")
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Joe Perches <joe@perches.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:22 +02:00