Commit Graph

73 Commits

Author SHA1 Message Date
Hannes Frederic Sowa 1bbdceef1e inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once
Initialize the ehash and ipv6_hash_secrets with net_get_random_once.

Each compilation unit gets its own secret now:
  ipv4/inet_hashtables.o
  ipv4/udp.o
  ipv6/inet6_hashtables.o
  ipv6/udp.o
  rds/connection.o

The functions still get inlined into the hashing functions. In the fast
path we have at most two (needed in ipv6) if (unlikely(...)).

Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:45:35 -04:00
Hannes Frederic Sowa 65cd8033ff ipv4: split inet_ehashfn to hash functions per compilation unit
This duplicates a bit of code but let's us easily introduce
separate secret keys later. The separate compilation units are
ipv4/inet_hashtabbles.o, ipv4/udp.o and rds/connection.o.

Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:45:34 -04:00
Eric Dumazet 05dbc7b594 tcp/dccp: remove twchain
TCP listener refactoring, part 3 :

Our goal is to hash SYN_RECV sockets into main ehash for fast lookup,
and parallel SYN processing.

Current inet_ehash_bucket contains two chains, one for ESTABLISH (and
friend states) sockets, another for TIME_WAIT sockets only.

As the hash table is sized to get at most one socket per bucket, it
makes little sense to have separate twchain, as it makes the lookup
slightly more complicated, and doubles hash table memory usage.

If we make sure all socket types have the lookup keys at the same
offsets, we can use a generic and faster lookup. It turns out TIME_WAIT
and ESTABLISHED sockets already have common lookup fields for IPv4.

[ INET_TW_MATCH() is no longer needed ]

I'll provide a follow-up to factorize IPv6 lookup as well, to remove
INET6_TW_MATCH()

This way, SYN_RECV pseudo sockets will be supported the same.

A new sock_gen_put() helper is added, doing either a sock_put() or
inet_twsk_put() [ and will support SYN_RECV later ].

Note this helper should only be called in real slow path, when rcu
lookup found a socket that was moved to another identity (freed/reused
immediately), but could eventually be used in other contexts, like
sock_edemux()

Before patch :

dmesg | grep "TCP established"

TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

After patch :

TCP established hash table entries: 524288 (order: 10, 4194304 bytes)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08 23:19:24 -04:00
David S. Miller 53af53ae83 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	include/linux/netdevice.h
	net/core/sock.c

Trivial merge issues.

Removal of "extern" for functions declaration in netdevice.h
at the same time "const" was added to an argument.

Two parallel line additions in net/core/sock.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08 23:07:53 -04:00
Eric Dumazet 80ad1d61e7 net: do not call sock_put() on TIMEWAIT sockets
commit 3ab5aee7fe ("net: Convert TCP & DCCP hash tables to use RCU /
hlist_nulls") incorrectly used sock_put() on TIMEWAIT sockets.

We should instead use inet_twsk_put()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 17:05:54 -04:00
Eric W. Biederman 0bbf87d852 net ipv4: Convert ipv4.ip_local_port_range to be per netns v3
- Move sysctl_local_ports from a global variable into struct netns_ipv4.
- Modify inet_get_local_port_range to take a struct net, and update all
  of the callers.
- Move the initialization of sysctl_local_ports into
   sysctl_net_ipv4.c:ipv4_sysctl_init_net from inet_connection_sock.c

v2:
- Ensure indentation used tabs
- Fixed ip.h so it applies cleanly to todays net-next

v3:
- Compile fixes of strange callers of inet_get_local_port_range.
  This patch now successfully passes an allmodconfig build.
  Removed manual inlining of inet_get_local_port_range in ipv4_local_port_range

Originally-by: Samya <samya@twitter.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-30 21:59:38 -07:00
Camelia Groza 3b8ccd4473 inet: fix spacing in assignment
Found using checkpatch.pl

Signed-off-by: Camelia Groza <camelia.groza@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11 12:02:39 -07:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Tom Herbert da5e36308d soreuseport: TCP/IPv4 implementation
Allow multiple listener sockets to bind to the same port.

Motivation for soresuseport would be something like a web server
binding to port 80 running with multiple threads, where each thread
might have it's own listener socket.  This could be done as an
alternative to other models: 1) have one listener thread which
dispatches completed connections to workers. 2) accept on a single
listener socket from multiple threads.  In case #1 the listener thread
can easily become the bottleneck with high connection turn-over rate.
In case #2, the proportion of connections accepted per thread tends
to be uneven under high connection load (assuming simple event loop:
while (1) { accept(); process() }, wakeup does not promote fairness
among the sockets.  We have seen the  disproportion to be as high
as 3:1 ratio between thread accepting most connections and the one
accepting the fewest.  With so_reusport the distribution is
uniform.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-23 13:44:01 -05:00
Eric Dumazet ce43b03e88 net: move inet_dport/inet_num in sock_common
commit 68835aba4d (net: optimize INET input path further)
moved some fields used for tcp/udp sockets lookup in the first cache
line of struct sock_common.

This patch moves inet_dport/inet_num as well, filling a 32bit hole
on 64 bit arches and reducing number of cache line misses in lookups.

Also change INET_MATCH()/INET_TW_MATCH() to perform the ports match
before addresses match, as this check is more discriminant.

Remove the hash check from MATCH() macros because we dont need to
re validate the hash value after taking a refcount on socket, and
use likely/unlikely compiler hints, as the sk_hash/hash check
makes the following conditional tests 100% predicted by cpu.

Introduce skc_addrpair/skc_portpair pair values to better
document the alignment requirements of the port/addr pairs
used in the various MATCH() macros, and remove some casts.

The namespace check can also be done at last.

This slightly improves TCP/UDP lookup times.

IP/TCP early demux needs inet->rx_dst_ifindex and
TCP needs inet->min_ttl, lets group them together in same cache line.

With help from Ben Hutchings & Joe Perches.

Idea of this patch came after Ling Ma proposal to move skc_hash
to the beginning of struct sock_common, and should allow him
to submit a final version of his patch. My tests show an improvement
doing so.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Joe Perches <joe@perches.com>
Cc: Ling Ma <ling.ma.program@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30 15:02:56 -05:00
Daniel Baluta 5e73ea1a31 ipv4: fix checkpatch errors
Fix checkpatch errors of the following type:
	* ERROR: "foo * bar" should be "foo *bar"
	* ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 12:37:19 -04:00
David S. Miller 6e5714eaf7 net: Compute protocol sequence numbers and fragment IDs using MD5.
Computers have become a lot faster since we compromised on the
partial MD4 hash which we use currently for performance reasons.

MD5 is a much safer choice, and is inline with both RFC1948 and
other ISS generators (OpenBSD, Solaris, etc.)

Furthermore, only having 24-bits of the sequence number be truly
unpredictable is a very serious limitation.  So the periodic
regeneration and 8-bit counter have been removed.  We compute and
use a full 32-bit sequence number.

For ipv6, DCCP was found to use a 32-bit truncated initial sequence
number (it needs 43-bits) and that is fixed here as well.

Reported-by: Dan Kaminsky <dan@doxpara.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-06 18:33:19 -07:00
Nagendra Tomar b4ff3c90e6 inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners
inet sockets corresponding to passive connections are added to the bind hash
using ___inet_inherit_port(). These sockets are later removed from the bind
hash using __inet_put_port(). These two functions are not exactly symmetrical.
__inet_put_port() decrements hashinfo->bsockets and tb->num_owners, whereas
___inet_inherit_port() does not increment them. This results in both of these
going to -ve values.

This patch fixes this by calling inet_bind_hash() from ___inet_inherit_port(),
which does the right thing.

'bsockets' and 'num_owners' were introduced by commit a9d8f9110d
(inet: Allowing more than 64k connections and heavily optimize bind(0))

Signed-off-by: Nagendra Singh Tomar <tomer_iisc@yahoo.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 18:18:44 -08:00
Balazs Scheidler 093d282321 tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()
When __inet_inherit_port() is called on a tproxy connection the wrong locks are
held for the inet_bind_bucket it is added to. __inet_inherit_port() made an
implicit assumption that the listener's port number (and thus its bind bucket).
Unfortunately, if you're using the TPROXY target to redirect skbs to a
transparent proxy that assumption is not true anymore and things break.

This patch adds code to __inet_inherit_port() so that it can handle this case
by looking up or creating a new bind bucket for the child socket and updates
callers of __inet_inherit_port() to gracefully handle __inet_inherit_port()
failing.

Reported by and original patch from Stephen Buck <stephen.buck@exinda.com>.
See http://marc.info/?t=128169268200001&r=1&w=2 for the original discussion.

Signed-off-by: KOVACS Krisztian <hidden@balabit.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 13:06:43 +02:00
Eric Dumazet 4bc2f18ba4 net/ipv4: EXPORT_SYMBOL cleanups
CodingStyle cleanups

EXPORT_SYMBOL should immediately follow the symbol declaration.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-12 12:57:54 -07:00
Amerigo Wang e3826f1e94 net: reserve ports for applications using fixed port numbers
(Dropped the infiniband part, because Tetsuo modified the related code,
I will send a separate patch for it once this is accepted.)

This patch introduces /proc/sys/net/ipv4/ip_local_reserved_ports which
allows users to reserve ports for third-party applications.

The reserved ports will not be used by automatic port assignments
(e.g. when calling connect() or bind() with port number 0). Explicit
port allocation behavior is unchanged.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 23:28:40 -07:00
Eric Dumazet 3cdaedae63 tcp: Fix a connect() race with timewait sockets
When we find a timewait connection in __inet_hash_connect() and reuse
it for a new connection request, we have a race window, releasing bind
list lock and reacquiring it in __inet_twsk_kill() to remove timewait
socket from list.

Another thread might find the timewait socket we already chose, leading to
list corruption and crashes.

Fix is to remove timewait socket from bind list before releasing the bind lock.

Note: This problem happens if sysctl_tcp_tw_reuse is set.

Reported-by: kapil dakhane <kdakhane@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-08 20:17:51 -08:00
Eric Dumazet 9327f7053e tcp: Fix a connect() race with timewait sockets
First patch changes __inet_hash_nolisten() and __inet6_hash()
to get a timewait parameter to be able to unhash it from ehash
at same time the new socket is inserted in hash.

This makes sure timewait socket wont be found by a concurrent
writer in __inet_check_established()

Reported-by: kapil dakhane <kdakhane@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-08 20:17:51 -08:00
Eric Dumazet 13475a30b6 tcp: connect() race with timewait reuse
Its currently possible that several threads issuing a connect() find
the same timewait socket and try to reuse it, leading to list
corruptions.

Condition for bug is that these threads bound their socket on same
address/port of to-be-find timewait socket, and connected to same
target. (SO_REUSEADDR needed)

To fix this problem, we could unhash timewait socket while holding
ehash lock, to make sure lookups/changes will be serialized. Only
first thread finds the timewait socket, other ones find the
established socket and return an EADDRNOTAVAIL error.

This second version takes into account Evgeniy's review and makes sure
inet_twsk_put() is called outside of locked sections.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 16:17:43 -08:00
Octavian Purdila 09ad9bc752 net: use net_eq to compare nets
Generated with the following semantic patch

@@
struct net *n1;
struct net *n2;
@@
- n1 == n2
+ net_eq(n1, n2)

@@
struct net *n1;
struct net *n2;
@@
- n1 != n2
+ !net_eq(n1, n2)

applied over {include,net,drivers/net}.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:14:13 -08:00
Eric Dumazet c720c7e838 inet: rename some inet_sock fields
In order to have better cache layouts of struct sock (separate zones
for rx/tx paths), we need this preliminary patch.

Goal is to transfert fields used at lookup time in the first
read-mostly cache line (inside struct sock_common) and move sk_refcnt
to a separate cache line (only written by rx path)

This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr,
sport and id fields. This allows a future patch to define these
fields as macros, like sk_refcnt, without name clashes.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-18 18:52:53 -07:00
Eric Dumazet f373b53b5f tcp: replace ehash_size by ehash_mask
Storing the mask (size - 1) instead of the size allows fast path to be
a bit faster.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 03:44:02 -07:00
Eric Dumazet 24dd1fa184 net: move bsockets outside of read only beginning of struct inet_hashinfo
And switch bsockets to atomic_t since it might be changed in parallel.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-01 12:31:33 -08:00
Evgeniy Polyakov a9d8f9110d inet: Allowing more than 64k connections and heavily optimize bind(0) time.
With simple extension to the binding mechanism, which allows to bind more
than 64k sockets (or smaller amount, depending on sysctl parameters),
we have to traverse the whole bind hash table to find out empty bucket.
And while it is not a problem for example for 32k connections, bind()
completion time grows exponentially (since after each successful binding
we have to traverse one bucket more to find empty one) even if we start
each time from random offset inside the hash table.

So, when hash table is full, and we want to add another socket, we have
to traverse the whole table no matter what, so effectivelly this will be
the worst case performance and it will be constant.

Attached picture shows bind() time depending on number of already bound
sockets.

Green area corresponds to the usual binding to zero port process, which
turns on kernel port selection as described above. Red area is the bind
process, when number of reuse-bound sockets is not limited by 64k (or
sysctl parameters). The same exponential growth (hidden by the green
area) before number of ports reaches sysctl limit.

At this time bind hash table has exactly one reuse-enbaled socket in a
bucket, but it is possible that they have different addresses. Actually
kernel selects the first port to try randomly, so at the beginning bind
will take roughly constant time, but with time number of port to check
after random start will increase. And that will have exponential growth,
but because of above random selection, not every next port selection
will necessary take longer time than previous. So we have to consider
the area below in the graph (if you could zoom it, you could find, that
there are many different times placed there), so area can hide another.

Blue area corresponds to the port selection optimization.

This is rather simple design approach: hashtable now maintains (unprecise
and racely updated) number of currently bound sockets, and when number
of such sockets becomes greater than predefined value (I use maximum
port range defined by sysctls), we stop traversing the whole bind hash
table and just stop at first matching bucket after random start. Above
limit roughly corresponds to the case, when bind hash table is full and
we turned on mechanism of allowing to bind more reuse-enabled sockets,
so it does not change behaviour of other sockets.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:34:31 -08:00
Eric Dumazet 920de804bc net: Make sure BHs are disabled in sock_prot_inuse_add()
The rule of calling sock_prot_inuse_add() is that BHs must
be disabled.  Some new calls were added where this was not
true and this tiggers warnings as reported by Ilpo.

Fix this by adding explicit BH disabling around those call sites,
or moving sock_prot_inuse_add() call inside an existing BH disabled
section.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-24 00:09:29 -08:00
Eric Dumazet c25eb3bfb9 net: Convert TCP/DCCP listening hash tables to use RCU
This is the last step to be able to perform full RCU lookups
in __inet_lookup() : After established/timewait tables, we
add RCU lookups to listening hash table.

The only trick here is that a socket of a given type (TCP ipv4,
TCP ipv6, ...) can now flight between two different tables
(established and listening) during a RCU grace period, so we
must use different 'nulls' end-of-chain values for two tables.

We define a large value :

#define LISTENING_NULLS_BASE (1U << 29)

So that slots in listening table are guaranteed to have different
end-of-chain values than slots in established table. A reader can
still detect it finished its lookup in the right chain.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-23 17:22:55 -08:00
Eric Dumazet 9db66bdcc8 net: convert TCP/DCCP ehash rwlocks to spinlocks
Now TCP & DCCP use RCU lookups, we can convert ehash rwlocks to spinlocks.

/proc/net/tcp and other seq_file 'readers' can safely be converted to 'writers'.

This should speedup writers, since spin_lock()/spin_unlock()
only use one atomic operation instead of two for write_lock()/write_unlock()

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 20:39:09 -08:00
Eric Dumazet 5caea4ea70 net: listening_hash get a spinlock per bucket
This patch prepares RCU migration of listening_hash table for
TCP/DCCP protocols.

listening_hash table being small (32 slots per protocol), we add
a spinlock for each slot, instead of a single rwlock for whole table.

This should reduce hold time of readers, and writers concurrency.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 00:40:07 -08:00
Eric Dumazet 3ab5aee7fe net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls
RCU was added to UDP lookups, using a fast infrastructure :
- sockets kmem_cache use SLAB_DESTROY_BY_RCU and dont pay the
  price of call_rcu() at freeing time.
- hlist_nulls permits to use few memory barriers.

This patch uses same infrastructure for TCP/DCCP established
and timewait sockets.

Thanks to SLAB_DESTROY_BY_RCU, no slowdown for applications
using short lived TCP connections. A followup patch, converting
rwlocks to spinlocks will even speedup this case.

__inet_lookup_established() is pretty fast now we dont have to
dirty a contended cache line (read_lock/read_unlock)

Only established and timewait hashtable are converted to RCU
(bind table and listen table are still using traditional locking)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 19:40:17 -08:00
Eric Dumazet 7a9546ee35 net: ib_net pointer should depends on CONFIG_NET_NS
We can shrink size of "struct inet_bind_bucket" by 50%, using
read_pnet() and write_pnet()

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 00:54:20 -08:00
Ilpo Järvinen 547b792cac net: convert BUG_TRAP to generic WARN_ON
Removes legacy reinvent-the-wheel type thing. The generic
machinery integrates much better to automated debugging aids
such as kerneloops.org (and others), and is unambiguous due to
better naming. Non-intuively BUG_TRAP() is actually equal to
WARN_ON() rather than BUG_ON() though some might actually be
promoted to BUG_ON() but I left that to future.

I could make at least one BUILD_BUG_ON conversion.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25 21:43:18 -07:00
Pavel Emelyanov de0744af1f mib: add net to NET_INC_STATS_BH
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-16 20:31:16 -07:00
Pavel Emelyanov 9f26b3add3 inet: add struct net argument to inet_ehashfn
Although this hash takes addresses into account, the ehash chains
can also be too long when, for instance, communications via lo occur.
So, prepare the inet_hashfn to take struct net into account.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16 17:13:27 -07:00
Pavel Emelyanov 2086a65078 inet: add struct net argument to inet_lhashfn
Listening-on-one-port sockets in many namespaces produce long 
chains in the listening_hash-es, so prepare the inet_lhashfn to 
take struct net into account.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16 17:13:08 -07:00
Pavel Emelyanov 7f635ab71e inet: add struct net argument to inet_bhashfn
Binding to some port in many namespaces may create too long
chains in bhash-es, so prepare the hashfn to take struct net
into account.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-16 17:12:49 -07:00
Pavel Emelyanov 53083773dc [INET]: Uninline the __inet_inherit_port call.
This deblats ~200 bytes when ipv6 and dccp are 'y'.

Besides, this will ease compilation issues for patches
I'm working on to make inet hash tables more scalable 
wrt net namespaces.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-17 23:18:15 -07:00
Denis V. Lunev 8c5da49a63 [NETNS]: Add netns refcnt debug for inet bind buckets.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-16 02:01:11 -07:00
Pavel Emelyanov c29a0bc4df [SOCK][NETNS]: Add a struct net argument to sock_prot_inuse_add and _get.
This counter is about to become per-proto-and-per-net, so we'll need 
two arguments to determine which cell in this "table" to work with.

All the places, but proc already pass proper net to it - proc will be
tuned a bit later.

Some indentation with spaces in proc files is done to keep the file
coding style consistent.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-31 19:41:46 -07:00
YOSHIFUJI Hideaki 878628fbf2 [NET] NETNS: Omit namespace comparision without CONFIG_NET_NS.
Introduce an inline net_eq() to compare two namespaces.
Without CONFIG_NET_NS, since no namespace other than &init_net
exists, it is always 1.

We do not need to convert 1) inline vs inline and
2) inline vs &init_net comparisons.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 04:40:00 +09:00
YOSHIFUJI Hideaki 3b1e0a655f [NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.
Introduce per-sock inlines: sock_net(), sock_net_set()
and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 04:39:55 +09:00
Pavel Emelyanov 39d8cda76c [SOCK]: Add udp_hash member to struct proto.
Inspired by the commit ab1e0a13 ([SOCK] proto: Add hashinfo member to 
struct proto) from Arnaldo, I made similar thing for UDP/-Lite IPv4 
and -v6 protocols.

The result is not that exciting, but it removes some levels of
indirection in udpxxx_get_port and saves some space in code and text.

The first step is to union existing hashinfo and new udp_hash on the
struct proto and give a name to this union, since future initialization 
of tcpxxx_prot, dccp_vx_protinfo and udpxxx_protinfo will cause gcc 
warning about inability to initialize anonymous member this way.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-22 16:50:58 -07:00
Adrian Bunk 324b57619b [INET]: Unexport inet_listen_wlock
This patch removes the no longer used EXPORT_SYMBOL(inet_listen_wlock).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-13 17:40:25 -08:00
Adrian Bunk 74da4d34e4 [INET]: Unexport __inet_hash_connect
This patch removes the unused EXPORT_SYMBOL_GPL(__inet_hash_connect).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-13 17:39:34 -08:00
Pavel Emelyanov 5d8c0aa943 [INET]: Fix accidentally broken inet(6)_hash_connect's port offset calculations.
The port offset calculations depend on the protocol family, but, as
Adrian noticed, I broke this logic with the commit

	5ee31fc1ec
	[INET]: Consolidate inet(6)_hash_connect.

Return this logic back, by passing the port offset directly into the
consolidated function.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Noticed-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05 03:14:44 -08:00
Arnaldo Carvalho de Melo ab1e0a13d7 [SOCK] proto: Add hashinfo member to struct proto
This way we can remove TCP and DCCP specific versions of

sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port
sk->sk_prot->hash:     inet_hash is directly used, only v6 need
                       a specific version to deal with mapped sockets
sk->sk_prot->unhash:   both v4 and v6 use inet_hash directly

struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so
that inet_csk_get_port can find the per family routine.

Now only the lookup routines receive as a parameter a struct inet_hashtable.

With this we further reuse code, reducing the difference among INET transport
protocols.

Eventually work has to be done on UDP and SCTP to make them share this
infrastructure and get as a bonus inet_diag interfaces so that iproute can be
used with these protocols.

net-2.6/net/ipv4/inet_hashtables.c:
  struct proto			     |   +8
  struct inet_connection_sock_af_ops |   +8
 2 structs changed
  __inet_hash_nolisten               |  +18
  __inet_hash                        | -210
  inet_put_port                      |   +8
  inet_bind_bucket_create            |   +1
  __inet_hash_connect                |   -8
 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191

net-2.6/net/core/sock.c:
  proto_seq_show                     |   +3
 1 function changed, 3 bytes added, diff: +3

net-2.6/net/ipv4/inet_connection_sock.c:
  inet_csk_get_port                  |  +15
 1 function changed, 15 bytes added, diff: +15

net-2.6/net/ipv4/tcp.c:
  tcp_set_state                      |   -7
 1 function changed, 7 bytes removed, diff: -7

net-2.6/net/ipv4/tcp_ipv4.c:
  tcp_v4_get_port                    |  -31
  tcp_v4_hash                        |  -48
  tcp_v4_destroy_sock                |   -7
  tcp_v4_syn_recv_sock               |   -2
  tcp_unhash                         | -179
 5 functions changed, 267 bytes removed, diff: -267

net-2.6/net/ipv6/inet6_hashtables.c:
  __inet6_hash |   +8
 1 function changed, 8 bytes added, diff: +8

net-2.6/net/ipv4/inet_hashtables.c:
  inet_unhash                        | +190
  inet_hash                          | +242
 2 functions changed, 432 bytes added, diff: +432

vmlinux:
 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7

/home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c:
  tcp_v6_get_port                    |  -31
  tcp_v6_hash                        |   -7
  tcp_v6_syn_recv_sock               |   -9
 3 functions changed, 47 bytes removed, diff: -47

/home/acme/git/net-2.6/net/dccp/proto.c:
  dccp_destroy_sock                  |   -7
  dccp_unhash                        | -179
  dccp_hash                          |  -49
  dccp_set_state                     |   -7
  dccp_done                          |   +1
 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241

/home/acme/git/net-2.6/net/dccp/ipv4.c:
  dccp_v4_get_port                   |  -31
  dccp_v4_request_recv_sock          |   -2
 2 functions changed, 33 bytes removed, diff: -33

/home/acme/git/net-2.6/net/dccp/ipv6.c:
  dccp_v6_get_port                   |  -31
  dccp_v6_hash                       |   -7
  dccp_v6_request_recv_sock          |   +5
 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:52 -08:00
Pavel Emelyanov c67499c0e7 [NETNS]: Tcp-v4 sockets per-net lookup.
Add a net argument to inet_lookup and propagate it further
into lookup calls. Plus tune the __inet_check_established.

The dccp and inet_diag, which use that lookup functions
pass the init_net into them.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:28:19 -08:00
Pavel Emelyanov 941b1d22cc [NETNS]: Make bind buckets live in net namespaces.
This tags the inet_bind_bucket struct with net pointer,
initializes it during creation and makes a filtering
during lookup.

A better hashfn, that takes the net into account is to
be done in the future, but currently all bind buckets
with similar port will be in one hash chain.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:28:18 -08:00
Pavel Emelyanov 5ee31fc1ec [INET]: Consolidate inet(6)_hash_connect.
These two functions are the same except for what they call
to "check_established" and "hash" for a socket.

This saves half-a-kilo for ipv4 and ipv6.

 add/remove: 1/0 grow/shrink: 1/4 up/down: 582/-1128 (-546)
 function                                     old     new   delta
 __inet_hash_connect                            -     577    +577
 arp_ignore                                   108     113      +5
 static.hint                                    8       4      -4
 rt_worker_func                               376     372      -4
 inet6_hash_connect                           584      25    -559
 inet_hash_connect                            586      25    -561

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:28:17 -08:00
Eric Dumazet 65f7651788 [NET]: prot_inuse cleanups and optimizations
1) Cleanups (all functions are prefixed by sock_prot_inuse)

sock_prot_inc_use(prot) -> sock_prot_inuse_add(prot,-1)
sock_prot_dec_use(prot) -> sock_prot_inuse_add(prot,-1)
sock_prot_inuse()       -> sock_prot_inuse_get()

New functions :

sock_prot_inuse_init() and sock_prot_inuse_free() to abstract pcounter use.

2) if CONFIG_PROC_FS=n, we can zap 'inuse' member from "struct proto",
since nobody wants to read the inuse value.

This saves 1372 bytes on i386/SMP and some cpu cycles.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:36 -08:00
Eric Dumazet 9a429c4983 [NET]: Add some acquires/releases sparse annotations.
Add __acquires() and __releases() annotations to suppress some sparse
warnings.

example of warnings :

net/ipv4/udp.c:1555:14: warning: context imbalance in 'udp_seq_start' - wrong
count at exit
net/ipv4/udp.c:1571:13: warning: context imbalance in 'udp_seq_stop' -
unexpected unlock

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:31 -08:00