The timeout variant of the list:set type must reference the member sets.
However, its garbage collector runs at timer interrupt so the mutex protection
of the references is a no go. Therefore the reference protection
is converted to rwlock.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
- the timeout value was actually not set
- the garbage collector was broken
The variant is fixed, the tests to the ipset testsuite are added.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The revision of the set type was not checked at the create command: if the
userspace sent a valid set type but with not supported revision number,
it'd create a loop.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The hash:*port* types with IPv4 silently ignored when address ranges
with non TCP/UDP were added/deleted from the set and used the first
address from the range only.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
net/netfilter/ipset/ip_set_core.c:615: warning: ‘clash’ may be used uninitialized in this function
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
When SYSCTL and PROC_FS and NETFILTER_NETLINK are not enabled:
net/built-in.o: In function `try_to_load_type':
ip_set_core.c:(.text+0x3ab49): undefined reference to `nfnl_unlock'
ip_set_core.c:(.text+0x3ab4e): undefined reference to `nfnl_lock'
...
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
When a message carries multiple commands and one of them triggers
an error, we have to report to the userspace which one was that.
The line number of the command plays this role and there's an attribute
reserved in the header part of the message to be filled out with the error
line number. In order not to modify the original message received from
the userspace, we construct a new, complete netlink error message and
modifies the attribute there, then send it.
Netlink is notified not to send its ACK/error message.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu
Signed-off-by: Patrick McHardy <kaber@trash.net>
Add a dummy ip_set_get_ip6_port function that unconditionally
returns false for CONFIG_IPV6=n and convert the real function
to ipv6_skip_exthdr() to avoid pulling in the ip6_tables module
when loading ipset.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Don't fall through in the switch statement, otherwise IPv4 headers
are incorrectly parsed again as IPv6 and the return value will always
be 'false'.
Signed-off-by: Patrick McHardy <kaber@trash.net>
None of the set types need uaccess.h since this is handled centrally
in ip_set_core. Most set types additionally don't need bitops.h and
spinlock.h since they use neither. tcp.h is only needed by those
using before(), udp.h is not needed at all.
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the list:set type support in two flavours:
without and with timeout. The sets has two sides: for the userspace,
they store the names of other (non list:set type of) sets: one can add,
delete and test set names. For the kernel, it forms an ordered union of
the member sets: the members sets are tried in order when elements are
added, deleted and tested and the process stops at the first success.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:net,port type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are two dimensional: IPv4/IPv6 network address/prefix and protocol/port
pairs.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:net type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are one dimensional: IPv4/IPv6 network address/prefixes.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip,port,net type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are three dimensional: IPv4/IPv6 address, protocol/port and IPv4/IPv6
network address/prefix triples. The different prefixes are searched/matched
from the longest prefix to the shortes one (most specific to least).
In other words the processing time linearly grows with the number of
different prefixes in the set.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip,port,ip type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are three dimensional: IPv4/IPv6 address, protocol/port and IPv4/IPv6
address triples.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip,port type support in four flavours:
for IPv4 and IPv6, both without and with timeout support. The elements
are two dimensional: IPv4/IPv6 address and protocol/port pairs. The port
is interpeted for TCP, UPD, ICMP and ICMPv6 (at the latters as type/code
of course).
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the hash:ip type support in four flavours:
for IPv4 or IPv6, both without and with timeout support.
All the hash types are based on the "array hash" or ahash structure
and functions as a good compromise between minimal memory footprint
and speed. The hashing uses arrays to resolve clashes. The hash table
is resized (doubled) when searching becomes too long. Resizing can be
triggered by userspace add commands only and those are serialized by
the nfnl mutex. During resizing the set is read-locked, so the only
possible concurrent operations are the kernel side readers. Those are
protected by RCU locking.
Because of the four flavours and the other hash types, the functions
are implemented in general forms in the ip_set_ahash.h header file
and the real functions are generated before compiling by macro expansion.
Thus the dereferencing of low-level functions and void pointer arguments
could be avoided: the low-level functions are inlined, the function
arguments are pointers of type-specific structures.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the bitmap:port type in two flavours, without
and with timeout support to store TCP/UDP ports from a range.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the bitmap:ip,mac set type in two flavours,
without and with timeout support. In this kind of set one can store
IPv4 address and (source) MAC address pairs. The type supports elements
added without the MAC part filled out: when the first matching from kernel
happens, the MAC part is automatically filled out. The timing out of the
elements stars when an element is complete in the IP,MAC pair.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The module implements the bitmap:ip set type in two flavours, without
and with timeout support. In this kind of set one can store IPv4
addresses (or network addresses) from a given range.
In order not to waste memory, the timeout version does not rely on
the kernel timer for every element to be timed out but on garbage
collection. All set types use this mechanism.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The patch adds the IP set core support to the kernel.
The IP set core implements a netlink (nfnetlink) based protocol by which
one can create, destroy, flush, rename, swap, list, save, restore sets,
and add, delete, test elements from userspace. For simplicity (and backward
compatibilty and for not to force ip(6)tables to be linked with a netlink
library) reasons a small getsockopt-based protocol is also kept in order
to communicate with the ip(6)tables match and target.
The netlink protocol passes all u16, etc values in network order with
NLA_F_NET_BYTEORDER flag. The protocol enforces the proper use of the
NLA_F_NESTED and NLA_F_NET_BYTEORDER flags.
For other kernel subsystems (netfilter match and target) the API contains
the functions to add, delete and test elements in sets and the required calls
to get/put refereces to the sets before those operations can be performed.
The set types (which are implemented in independent modules) are stored
in a simple RCU protected list. A set type may have variants: for example
without timeout or with timeout support, for IPv4 or for IPv6. The sets
(i.e. the pointers to the sets) are stored in an array. The sets are
identified by their index in the array, which makes possible easy and
fast swapping of sets. The array is protected indirectly by the nfnl
mutex from nfnetlink. The content of the sets are protected by the rwlock
of the set.
There are functional differences between the add/del/test functions
for the kernel and userspace:
- kernel add/del/test: works on the current packet (i.e. one element)
- kernel test: may trigger an "add" operation in order to fill
out unspecified parts of the element from the packet (like MAC address)
- userspace add/del: works on the netlink message and thus possibly
on multiple elements from the IPSET_ATTR_ADT container attribute.
- userspace add: may trigger resizing of a set
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Jozsef Kadlecsik
Shan Wei
Patrick McHardy