Commit Graph

11 Commits

Author SHA1 Message Date
H. Peter Anvin 1359096eac bzip2/lzma: quiet Kconfig warning for INITRAMFS_COMPRESSION_NONE
Impact: quiet Kconfig warning

It appears that Kconfig simply has no way to provide defaults for
entries that exist inside a conditionalized choice block.
Fortunately, it turns out we don't actually ever use
CONFIG_INITRAMFS_COMPRESSION_NONE, so we can just drop it for
everything outside the choice block.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-31 23:51:56 -07:00
Alain Knaff ab76f3d771 bzip2/lzma: make internal initramfs compression configurable
Impact: Avoids silent environment dependency

Make builtin initramfs compression an explicit configurable.  The
previous version would pick a compression based on the binaries which
were installed on the system, which could lead to unexpected results.
It is now explicitly configured, and not having the appropriate
binaries installed on the build host is simply an error.

Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2009-02-19 13:43:51 -08:00
Alain Knaff a26ee60f90 bzip2/lzma: fix built-in initramfs vs CONFIG_RD_GZIP
Impact: Resolves build failures in some configurations

Makes it possible to disable CONFIG_RD_GZIP . In that case, the
built-in initramfs will be compressed by whatever compressor is
available (bzip2 or lzma) or left uncompressed if none is available.

It also removes a couple of warnings which occur when no ramdisk
compression at all is chosen.

It also restores the select ZLIB_INFLATE in drivers/block/Kconfig
which somehow came missing. This is needed to activate compilation of
the stuff in zlib_deflate.

Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-01-07 00:10:27 -08:00
Jean-Paul Saman c33df4eaaf [PATCH] disable init/initramfs.c
The file init/initramfs.c is always compiled and linked in the kernel
vmlinux even when BLK_DEV_RAM and BLK_DEV_INITRD are disabled and the
system isn't using any form of an initramfs or initrd.  In this situation
the code is only used to unpack a (static) default initial rootfilesystem.
The current init/initramfs.c code.  usr/initramfs_data.o compiles to a size
of ~15 kbytes.  Disabling BLK_DEV_RAM and BLK_DEV_INTRD shrinks the kernel
code size with ~60 Kbytes.

This patch avoids compiling in the code and data for initramfs support if
CONFIG_BLK_DEV_INITRD is not defined.  Instead of the initramfs code and
data it uses a small routine in init/noinitramfs.c to setup an initial
static default environment for mounting a rootfilesystem later on in the
kernel initialisation process.  The new code is: 164 bytes of size.

The patch is separated in two parts:
1) doesn't compile initramfs code when CONFIG_BLK_DEV_INITRD is not set
2) changing all plaforms vmlinux.lds.S files to not reserve an area of
PAGE_SIZE when CONFIG_BLK_DEV_INITRD is not set.

[deweerdt@free.fr: warning fix]
Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:25 -08:00
Thomas Chou a26d79ca81 [PATCH] initramfs: handle more than one source dir or file list
Fix bug 7401.

Handle more than one source dir or file list to the initramfs gen scripts.

The Kconfig help for INITRAMFS_SOURCE claims that you can specify multiple
space-separated sources in order to allow unprivileged users to build an
image.  There are two bugs in the current implementation that prevent this
from working.

First, we pass "file1 dir2" to the gen_initramfs_list.sh script, which it
obviously can't open.

Second, gen_initramfs_list.sh -l outputs multiple definitions for
deps_initramfs -- one for each argument.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-25 13:28:33 -08:00
Sam Ravnborg 48f1f0589d kbuild: consistently decide when to rebuild a target
Consistently decide when to rebuild a target across all of
if_changed, if_changed_dep, if_changed_rule.
PHONY targets are now treated alike (ignored) for all targets

While add it make Kbuild.include almost readable by factoring out a few
bits to some common variables and reuse this in Makefile.build.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-09-25 09:00:00 +02:00
Sam Ravnborg 58a2f7d85a kbuild: do not try to build content of initramfs
When a file supplied via CONFIG_INITRAMFS pointed to a file
for which kbuild had a rule to compile it (foo.c => foo.o)
then kbuild would compile the file before adding the
file to the initramfs.

Teach make that files included in initramfs shall not be updated by adding
an 'empty command'. (See "Using Empty Commands" in info make).

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-08-07 20:58:28 +02:00
Nickolay ff5417107b kbuild: bugfix with initramfs
This patch fix double inclusion of ramfs-input.

Signed-off-by: Nickolay Vinogradov <nickolay@protei.ru>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-10 09:07:04 +02:00
Sam Ravnborg d39a206bc3 kbuild: rebuild initramfs if content of initramfs changes
initramfs.cpio.gz being build in usr/ and included in the
kernel was not rebuild when the included files changed.

To fix this the following was done:
- let gen_initramfs.sh generate a list of files and directories included
  in the initramfs
- gen_initramfs generate the gzipped cpio archive so we could simplify
  the kbuild file (Makefile)
- utilising the kbuild infrastructure so when uid/gid root mapping changes
  the initramfs will be rebuild

With this change we have a much more robust initramfs generation.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-04-11 13:24:32 +02:00
Sam Ravnborg 8ec4b4ff1c kbuild: introduce Kbuild.include
Kbuild.include is a placeholder for definitions originally present in
both the top-level Makefile and scripts/Makefile.build.
There were a slight difference in the filechk definition, so the most videly
used version was kept and usr/Makefile was adopted for this syntax.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
2005-07-25 20:10:36 +00:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00