Commit Graph

473 Commits

Author SHA1 Message Date
Clemens Ladisch 7f51a100bb firewire: ohci: retransmit isochronous transmit packets on cycle loss
In isochronous transmit DMA descriptors, link the skip address pointer
back to the descriptor itself.  When a cycle is lost, the controller
will send the packet in the next cycle, instead of terminating the
entire DMA program.

There are two reasons for this:

* This behaviour is compatible with the old IEEE1394 stack.  Old
  applications would not expect the DMA program to stop in this case.

* Since the OHCI driver does not report any uncompleted packets, the
  context would stop silently; clients would not have any chance to
  detect and handle this error without a watchdog timer.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Pieter Palmers notes:

"The reason I added this retry behavior to the old stack is because some
cards now and then fail to send a packet (e.g. the o2micro card in my
dell laptop).  I couldn't figure out why exactly this happens, my best
guess is that the card cannot fetch the payload data on time.  This
happens much more frequently when sending large packets, which leads me
to suspect that there are some contention issues with the DMA that fills
the transmit FIFO.

In the old stack it was a pretty critical issue as it resulted in a
freeze of the userspace application.

The omission of a packet doesn't necessarily have to be an issue.  E.g.
in IEC61883 streams the DBC field can be used to detect discontinuities
in the stream.  So as long as the other side doesn't bail when no
[packet] is present in a cycle, there is not really a problem.

I'm not convinced though that retrying is the proper solution, but it is
simple and effective for what it had to do.  And I think there are no
reasons not to do it this way.  Userspace can still detect this by
checking the cycle the descriptor was sent in."

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changelog, comment)
2010-02-14 15:10:41 +01:00
Stefan Richter 110f82d7a2 firewire: net: fix panic in fwnet_write_complete
In the transmit path of firewire-net (IPv4 over 1394), the following
race condition may occur:
  - The networking soft IRQ inserts a datagram into the 1394 async
    request transmit DMA.
  - The 1394 async transmit completion tasklet runs to finish cleaning
    up (unlink datagram from list of pending ones, release skb and
    outbound 1394 transaction object) --- before the networking soft IRQ
    had a chance to proceed and add the datagram to the list of pending
    datagrams.

This caused a panic in the 1394 async transmit completion tasklet when
it dereferenced unitialized list heads:
http://bugzilla.kernel.org/show_bug.cgi?id=15077

The fix is to add checks in the tx soft IRQ and in the tasklet to
determine which of these two is the last referrer to the transaction
object.  Then handle the cleanup of the object by the last referrer
rather than assuming that the tasklet is always the last one.

There is another similar race:  Between said tasklet and fwnet_close,
i.e. at ifdown.  However, that race is much less likely to occur in
practice and shall be fixed in a separate update.

Reported-by: Илья Басин <basinilya@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-02-01 21:51:28 +01:00
Stefan Richter 7a48143678 firewire: ohci: fix crashes with TSB43AB23 on 64bit systems
Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour
as TSB43AB22/A in dual buffer IR DMA mode:  If descriptors are located
at physical addresses above the 31 bit address range (2 GB), the
controller will overwrite random memory.  With luck, this merely
prevents video reception.  With only a little less luck, the machine
crashes.

We use the same workaround here as with TSB43AB22/A:  Switch off the
dual buffer capability flag and use packet-per-buffer IR DMA instead.
Another possible workaround would be to limit the coherent DMA mask to
31 bits.

In Linux 2.6.33, this change serves effectively only as documentation
since dual buffer mode is not used for any controller anymore.  But
somebody might want to re-enable it in the future to make use of
features of dual buffer DMA that are not available in packet-per-buffer
mode.

In Linux 2.6.32 and older, this update is vital for anyone with this
controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or
audio applications.

We have at least four reports:
http://bugzilla.kernel.org/show_bug.cgi?id=13808
http://marc.info/?l=linux1394-user&m=126154279004083
https://bugzilla.redhat.com/show_bug.cgi?id=552142
http://marc.info/?l=linux1394-user&m=126432246128386

Reported-by: Paul Johnson
Reported-by: Ronneil Camara
Reported-by: G Zornetzer
Reported-by: Mark Thompson
Cc: stable@kernel.org
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-27 18:24:53 +01:00
Stefan Richter 281e20323a firewire: core: fix use-after-free regression in FCP handler
Commit db5d247a "firewire: fix use of multiple AV/C devices, allow
multiple FCP listeners" introduced a regression into 2.6.33-rc3:
The core freed payloads of incoming requests to FCP_Request or
FCP_Response before a userspace driver accessed them.

We need to copy such payloads for each registered userspace client
and free the copies according to the lifetime rules of non-FCP client
request resources.

(This could possibly be optimized by reference counts instead of
copies.)

The presently only kernelspace driver which listens for FCP requests,
firedtv, was not affected because it already copies FCP frames into an
own buffer before returning to firewire-core's FCP handler dispatcher.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-26 20:54:50 +01:00
Stefan Richter e300839da4 firewire: core: add_descriptor size check
Presently, firewire-core only checks whether descriptors that are to be
added by userspace drivers to the local node's config ROM do not exceed
a size of 256 quadlets.  However, the sum of the bare minimum ROM plus
all descriptors (from firewire-core, from firewire-net, from userspace)
must not exceed 256 quadlets.

Otherwise, the bounds of a statically allocated buffer will be
overwritten.  If the kernel survives that, firewire-core will
subsequently be unable to parse the local node's config ROM.

(Note, userspace drivers can add descriptors only through device files
of local nodes.  These are usually only accessible by root, unlike
device files of remote nodes which may be accessible to lesser
privileged users.)

Therefore add a test which takes the actual present and required ROM
size into account for all descriptors of kernelspace and userspace
drivers.

Cc: stable@kernel.org
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-26 20:54:50 +01:00
Stefan Richter 5d7db0499e firewire, ieee1394: update Kconfig help
Update the Kconfig help texts of both stacks to encourage a general move
from the older to the newer drivers.  However, do not label ieee1394 as
"Obsolete" yet, as the newer drivers have not been deployed as default
stack in the majority of Linux distributions yet, and those who start
doing so now may still want to install the old drivers as fallback for
unforeseen issues.

Since Linux 2.6.32, FireWire audio devices can be driven by the newer
firewire driver stack too, hence remove an outdated comment about audio
devices.  Also remove comments about library versions since the 2nd
generation of libraw1394 and libdc1394 is now in common use; details on
library versions can be read at the wiki link from the help texts.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29 19:58:17 +01:00
Stefan Richter 090699c053 firewire: ohci: always use packet-per-buffer mode for isochronous reception
This is a minimal change meant for the short term:  Never set the
ohci->use_dualbuffer flag to true.

There are two reasons to do so:

  - Packet-per-buffer mode and dual-buffer mode do not behave the same
    under certain circumstances, notably if several packets are covered
    by a single fw_cdev_iso_packet descriptor.
    http://marc.info/?l=linux1394-devel&m=124965653718313
    Therefore the driver stack should not silently choose one or the
    other mode but should leave the choice to the high-level driver
    (regardless if kernel driver or userspace driver).  Or simply always
    only offer packet-per-buffer mode, since a considerable number of
    controllers, even current ones, does not offer dual-buffer support.

  - Even under circumstances where packet-per-buffer mode and
    dual-buffer mode behave exactly the same --- notably when used
    through libraw1394, libdc1394, as well as the current two kernel
    drivers which use isochronous reception (firewire-net and firedtv)
    --- we are still faced with the problem that several OHCI 1.1
    controllers have bugs in dual-buffer mode.  Although it looks like
    we have identified most of those buggy controllers by now, we
    cannot be quite sure about that.

So, use packet-per-buffer by default from now on.  This change should
be followed up by a more complete solution:  Either extend the
in-kernel API and the userspace ABI by a choice between the two IR modes
or remove all dual-buffer related code from firewire-ohci.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29 19:58:17 +01:00
Stefan Richter cf0e575dcc firewire: cdev: fix another memory leak in an error path
If copy_from_user in an FW_CDEV_IOC_SEND_RESPONSE ioctl failed, the
fw_request pointed to by the inbound_transaction_resource is no
longer referenced and needs to be freed.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29 19:58:16 +01:00
Clemens Ladisch db5d247ae8 firewire: fix use of multiple AV/C devices, allow multiple FCP listeners
Control of more than one AV/C device at once --- e.g. camcorders, tape
decks, audio devices, TV tuners --- failed or worked only unreliably,
depending on driver implementation.  This affected kernelspace and
userspace drivers alike and was caused by firewire-core's inability to
accept multiple registrations of FCP listeners.

The fix allows multiple address handlers to be registered for the FCP
command and response registers.  When a request for these registers is
received, all handlers are invoked, and the Firewire response is
generated by the core and not by any handler.

The cdev API does not change, i.e., userspace is still expected to send
a response for FCP requests; this response is silently ignored.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changelog, rebased, whitespace)
2009-12-29 19:58:16 +01:00
Linus Torvalds 5f1141eb35 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: handle receive packets with a data length of zero
2009-12-11 15:22:27 -08:00
Jay Fenlason 8c0c0cc2d9 firewire: ohci: handle receive packets with a data length of zero
Queueing to receive an ISO packet with a payload length of zero
silently does nothing in dualbuffer mode, and crashes the kernel in
packet-per-buffer mode.  Return an error in dualbuffer mode, because
the DMA controller won't let us do what we want, and work correctly in
packet-per-buffer mode.

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: stable@kernel.org
2009-12-11 21:43:45 +01:00
Linus Torvalds 4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Linus Torvalds bb592cf474 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: Use hweight32
  firewire: cdev: reduce stack usage by ioctl_dispatch
  firewire: ohci: 0 may be a valid DMA address
  firewire: core: WARN on wrong usage of core transaction functions
  firewire: core: optimize Topology Map creation
  firewire: core: clarify generate_config_rom usage
  firewire: optimize config ROM creation
  firewire: cdev: normalize variable names
  firewire: normalize style of queue_work wrappers
  firewire: cdev: fix memory leak in an error path
2009-12-08 08:13:10 -08:00
Jiri Kosina d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Linus Torvalds f8a2cee091 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: pass correct iso xmit timestamps to core
  firewire: ohci: Make cycleMatch ISO transmission work
2009-11-30 13:58:23 -08:00
Jay Fenlason 31769cef2e firewire: ohci: pass correct iso xmit timestamps to core
Here is the final set of patches I used to get ffado to work with the
new firewire stack.  With these patches, I was able to start ardour
and record from and playback to my PreSonus Inspire1394 from a
(mostly) Fedora 12 system.

Signed-off-by: Jay Fenlason <fenlason@redhat.com>

Until now, firewire-ohci exposed only the transmit cycle of the last
transmitted packet at each isochronous transmit complete event.  This
made it impossible for FFADO (FireWire audio drivers in userspace) to
synchronize audio-out streams.  The fix is to store the timestamp of
each packet in the iso xmit event.  As a bonus, the transfer status is
stored too.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-11-21 00:56:47 +01:00
Jay Fenlason 5ed1f321a7 firewire: ohci: Make cycleMatch ISO transmission work
Calling the START_ISO ioctl with a nonnegative cycle paramater has
never worked.  Last night I got around to figuring out why.  Most of
this patch is a big comment explaining why we enable an interrupt
source then don't actually do anything when we get one.  As the
comment says, we should do more, but we don't have a way to tell
userspace what happened. . .

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited comment)
2009-11-18 20:31:17 +01:00
Stefan Richter b2c0a2ac3e firewire: cdev: reduce stack usage by ioctl_dispatch
Replace a hardcoded buffer size by a sizeof union {}.  This shrinks the
stack-allocated ioctl argument buffer from 256 to 40 bytes.  (This is
not much, but subsequent stack usage particularly by the queue_iso ioctl
handler adds up.)

The new form is also easier to keep up to date than a hardcoded size if
more ioctls are added.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-31 11:40:52 +01:00
Stefan Richter 19593ffdb6 firewire: ohci: 0 may be a valid DMA address
I was told that there are obscure architectures with non-coherent DMA
which may DMA-map to bus address 0.  We shall not use 0 as a magic
number of uninitialized bus address variables.

The packet->payload_length > 0 test cannot be used either (except in
at_context_queue_packet) because local requests are not DMA-mapped
regardless of payload_length.  Hence add a state flag to struct
fw_packet.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-31 11:40:51 +01:00
Stefan Richter 5b189bf363 firewire: core: WARN on wrong usage of core transaction functions
In the code path which creates request packets, clearly mark a switch
branch which must never be reached with a WARN.

In the code path which creates response packets, replace a BUG by a
friendlier to debug WARN.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-31 11:40:51 +01:00
Linus Torvalds a3ccf63ee6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: provide fallback if mgt_ORB_timeout is missing
  ieee1394: add documentation entry to MAINTAINERS
  ieee1394: update URLs in debugging-via-ohci1394.txt
2009-10-14 15:36:19 -07:00
Stefan Richter cb7c96da36 firewire: core: optimize Topology Map creation
The Topology Map of the local node was created in CPU byte order,
then a temporary big endian copy was created to compute the CRC,
and when a read request to the Topology Map arrived it had to be
converted to big endian byte order again.

We now generate it in big endian byte order in the first place.
This also rids us of 1000 bytes stack usage in tasklet context.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter fe242579e9 firewire: core: clarify generate_config_rom usage
Move the static config ROM buffer into the scope of the two callers of
generate_config_rom().  That way the ROM length can be passed over as
return value rather than through a pointer argument.

It also becomes more obvious that accesses to the config ROM buffer have
to be serialized and how this is accomplished.  And firewire-core.ko
shrinks a bit as well.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter 8e85973efc firewire: optimize config ROM creation
The config ROM image of the local node was created in CPU byte order,
then a temporary big endian copy was created to compute the CRC, and
finally the card driver created its own big endian copy.

We now generate it in big endian byte order in the first place to avoid
one byte order conversion and the temporary on-stack copy of the ROM
image (1000 bytes stack usage in process context).  Furthermore, two
1000 bytes memset()s are replaced by one 1000 bytes - ROM length sized
memset.

The trivial fw_memcpy_{from,to}_be32() helpers are now superfluous and
removed.  The newly added __compute_block_crc() function will be folded
into fw_compute_block_crc() in a subsequent change.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter e21fcf798e firewire: cdev: normalize variable names
Unify some names:
  - "e" for pointers to subtypes of struct event,
  - "event" for struct members and pointers to struct event,
  - "r" for pointers to subtypes of struct client_resource,
  - "resource" for struct members and pointers to struct client_resource,
  - other names for struct members and pointers to other types.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter 9fb551bf72 firewire: normalize style of queue_work wrappers
A few stylistic changes to unify some code patterns in the subsystem:

  - The similar queue_delayed_work helpers fw_schedule_bm_work,
    schedule_iso_resource, and sbp2_queue_work now have the same call
    convention.
  - Two conditional calls of schedule_iso_resource are factored into
    another small helper.
  - An sbp2_target_get helper is added as counterpart to
    sbp2_target_put.

Object size of firewire-core is decreased a little bit, object size of
firewire-sbp2 remains unchanged.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 23:10:48 +02:00
Stefan Richter eaf76e0d02 firewire: sbp2: provide fallback if mgt_ORB_timeout is missing
The Unit_Characteristics entry of an SBP-2 unit directory is not
mandatory as far as I can tell.  If it is missing, we would probably
fail to log in into the target because firewire-sbp2 would not wait for
status after it sent the login request.

The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it
is executed exactly once before login, rather than 0..n times depending
on the target's config ROM.  With targets with one or more
Unit_Characteristics entries, the result is the same as before.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 21:55:19 +02:00
Stefan Richter 7e44c0b56b firewire: cdev: fix memory leak in an error path
If copy_from_user in an FW_CDEV_IOC_SEND_RESPONSE ioctl failed, an
inbound_transaction_resource instance is no longer referenced and needs
to be freed.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14 21:55:19 +02:00
Alexey Dobriyan a99bbaf5ee headers: remove sched.h from poll.h
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-04 15:05:10 -07:00
Linus Torvalds ff830b8e5f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: remove a workaround for Momobay FX-3A
  firewire: sbp2: remove a workaround for Momobay FX-3A
  firewire: sbp2: fix status reception
  firewire: core: fix topology map response handler
  firewire: core: fix race with parallel PCI device probe
  firewire: core: header file cleanup
  firewire: ohci: fix Self ID Count register mask (safeguard against buffer overflow)
  ieee1394: raw1394: Do not leak memory on failed trylock.
2009-09-23 09:43:22 -07:00
David Brownell a4dbd6740d driver model: constify attribute groups
Let attribute group vectors be declared "const".  We'd
like to let most attribute metadata live in read-only
sections... this is a start.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:47 -07:00
Linus Torvalds d7e9660ad9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
  netxen: update copyright
  netxen: fix tx timeout recovery
  netxen: fix file firmware leak
  netxen: improve pci memory access
  netxen: change firmware write size
  tg3: Fix return ring size breakage
  netxen: build fix for INET=n
  cdc-phonet: autoconfigure Phonet address
  Phonet: back-end for autoconfigured addresses
  Phonet: fix netlink address dump error handling
  ipv6: Add IFA_F_DADFAILED flag
  net: Add DEVTYPE support for Ethernet based devices
  mv643xx_eth.c: remove unused txq_set_wrr()
  ucc_geth: Fix hangs after switching from full to half duplex
  ucc_geth: Rearrange some code to avoid forward declarations
  phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
  drivers/net/phy: introduce missing kfree
  drivers/net/wan: introduce missing kfree
  net: force bridge module(s) to be GPL
  Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
  ...

Fixed up trivial conflicts:

 - arch/x86/include/asm/socket.h

   converted to <asm-generic/socket.h> in the x86 tree.  The generic
   header has the same new #define's, so that works out fine.

 - drivers/net/tun.c

   fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
   switched over to using 'tun->socket.sk' instead of the redundantly
   available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
   to the TUN driver") which added a new 'tun->sk' use.

   Noted in 'next' by Stephen Rothwell.
2009-09-14 10:37:28 -07:00
Stefan Richter 3c5f80357c firewire: sbp2: remove a workaround for Momobay FX-3A
The inquiry delay does more harm than good in tests on a recent kernel.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12 14:48:40 +02:00
Stefan Richter 094614fc14 firewire: sbp2: fix status reception
Per SBP-2 clause 5.3, a target shall store 8...32 bytes of status
information.  Trailing zeros after the first 8 bytes don't need to be
stored, they are implicit.  Fix the status write handler to clear all
unwritten status data.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12 14:48:40 +02:00
Stefan Richter 85cb9b6864 firewire: core: fix topology map response handler
This register is 1 kBytes large.  Adjust topology_map.length to prevent
registration of other response handlers in this region and to make sure
that we respond to requests to the upper half of the register.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12 14:48:40 +02:00
Stefan Richter b171e204b3 firewire: core: fix race with parallel PCI device probe
The config ROM buffer received from generate_config_rom is a globally
shared static buffer.  Extend the card_mutex protection in fw_add_card
until after the config ROM was copied into the card driver's buffer.
Otherwise, parallelized card driver probes may end up with ROM contents
that were meant for a different card.

firewire-ohci's card->driver->enable hook is safe to be called within
the card_mutex.  Furthermore, it is safe to reorder card_list update
versus card enable, which simplifies the code a little.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12 14:48:40 +02:00
Stefan Richter 18668ff9a3 firewire: core: header file cleanup
fw_card_get, fw_card_put, fw_card_release are currently not exported for
use outside the firewire-core.  Move their definitions/ declarations
from the subsystem header file to the core header file.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12 14:48:40 +02:00
Stefan Richter 928ec5f148 firewire: ohci: fix Self ID Count register mask (safeguard against buffer overflow)
The selfIDSize field of Self ID Count is 9 bits wide, and we are only
interested in the high 8 bits.  Fix the mask accordingly.  The
previously too large mask didn't do damage though because the next few
bits in the register are reserved and therefore zero with presently
existing hardware.

Also, check for the maximum possible self ID count of 252 (according to
OHCI 1.1 clause 11.2 and IEEE 1394a-2000 clause 4.3.4.1, i.e. up to four
self IDs of up to 63 nodes, even though IEEE 1394 up to edition 2008
defines only up to three self IDs per node).  More than 252 self IDs
would only happen if the self ID receive DMA unit malfunctioned, which
would likely be caught by other self ID buffer checks.  However, check
it early to be sure.  More than 253 quadlets would overflow the Topology
Map CSR.

Reported-By: PaX Team
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12 14:48:40 +02:00
Linus Torvalds f815c335d2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: fix freeing of unallocated memory
  firewire: ohci: fix Ricoh R5C832, video reception
  firewire: ohci: fix Agere FW643 and multiple cameras
  firewire: core: fix crash in iso resource management
2009-09-05 14:59:00 -07:00
Stefan Richter baed6b82d9 firewire: sbp2: fix freeing of unallocated memory
If a target writes invalid status (typically status of a command that
already timed out), firewire-sbp2 attempts to put away an ORB that
doesn't exist.  https://bugzilla.redhat.com/show_bug.cgi?id=519772

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05 15:59:34 +02:00
Stefan Richter 4fe0badd58 firewire: ohci: fix Ricoh R5C832, video reception
In dual-buffer DMA mode, no video frames are ever received from R5C832
by libdc1394.  Fallback to packet-per-buffer DMA works reliably.
http://thread.gmane.org/gmane.linux.kernel.firewire.devel/13393/focus=13476

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05 15:59:34 +02:00
Stefan Richter fc383796a8 firewire: ohci: fix Agere FW643 and multiple cameras
An Agere FW643 OHCI 1.1 card works fine for video reception from one
camera but fails early if receiving from two cameras.  After a short
while, no IR IRQ events occur and the context control register does not
react anymore.  This happens regardless whether both IR DMA contexts are
dual-buffer or one is dual-buffer and the other packet-per-buffer.

This can be worked around by disabling dual buffer DMA mode entirely.
http://sourceforge.net/mailarchive/message.php?msg_name=4A7C0594.2020208%40gmail.com
(Reported by Samuel Audet.)

In another report (by Jonathan Cameron), an FW643 works OK with two
cameras in dual buffer mode.  Whether this is due to different chip
revisions or different usage patterns (different video formats) is not
yet clear.  However, as far as the current capabilities of
firewire-core's isochronous I/O interface are concerned, simply
switching off dual-buffer on non-working and working FW643s alike is not
a problem in practice.  We only need to revisit this issue if we are
going to enhance the interface, e.g. so that applications can explicitly
choose modes.

Reported-by: Samuel Audet <samuel.audet@gmail.com>
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05 15:59:34 +02:00
Stefan Richter 1821bc19d5 firewire: core: fix crash in iso resource management
This fixes a regression due to post 2.6.30 commit "firewire: core: do
not DMA-map stack addresses" 6fdc037094.

As David Moore noted, a previously correct sizeof() expression became
wrong since the commit changed its argument from an array to a pointer.
This resulted in an oops in ohci_cancel_packet in the shared workqueue
thread's context when an isochronous resource was to be freed.

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05 15:59:34 +02:00
Eric Dumazet 451f144398 drivers: Kill now superfluous ->last_rx stores
The generic packet receive code takes care of setting
netdev->last_rx when necessary, for the sake of the
bonding ARP monitor.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Neil Horman <nhorman@txudriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02 23:07:36 -07:00
Stephen Hemminger 0fc0b732ea netdev: drivers should make ethtool_ops const
No need to put ethtool_ops in data, they should be const.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02 01:03:33 -07:00
Stephen Hemminger 424efe9caf netdev: convert pseudo drivers to netdev_tx_t
These are all drivers that don't touch real hardware.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:13:40 -07:00
Linus Torvalds f63bafe556 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)
  firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)
  firewire: core: do not DMA-map stack addresses
2009-07-06 14:03:44 -07:00
Stefan Richter af2719415a firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)
Increase the command ORB data structure to transport up to 16 bytes long
CDBs (instead of 12 bytes), and tell the SCSI mid layer about it.  This
is notably necessary for READ CAPACITY(16) and friends, i.e. support of
large disks.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-07-02 21:27:01 +02:00
Stefan Richter 6fdc037094 firewire: core: do not DMA-map stack addresses
The DMA mapping API cannot map on-stack addresses, as explained in
Documentation/DMA-mapping.txt.  Convert the two cases of on-stack packet
payload buffers in firewire-core (payload of lock requests in the bus
manager work and in iso resource management) to slab-allocated memory.

There are a number on-stack buffers for quadlet write or quadlet read
requests in firewire-core and firewire-sbp2.  These are harmless; they
are copied to/ from card driver internal DMA buffers since quadlet
payloads are inlined with packet headers.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-25 19:42:36 +02:00