Commit Graph

959 Commits

Author SHA1 Message Date
Ingo Molnar 47749b14e5 i2c: fix build bug in i2c-designware.c
This build error triggers on x86:

 drivers/built-in.o: In function `i2c_dw_init':
 i2c-designware.c:(.text+0x4e37ca): undefined reference to `clk_get_rate'
 drivers/built-in.o: In function `dw_i2c_probe':
 i2c-designware.c:(.devinit.text+0x51f5e): undefined reference to `clk_get'
 i2c-designware.c:(.devinit.text+0x51f76): undefined reference to `clk_enable'
 i2c-designware.c:(.devinit.text+0x520ff): undefined reference to `clk_disable'
 i2c-designware.c:(.devinit.text+0x52108): undefined reference to `clk_put'

Because this new driver uses the clk_*() facilities which is an
ARM-only thing currently.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25 11:22:12 -07:00
Baruch Siach 1ab52cf910 i2c: driver for the Synopsys DesignWare I2C controller
The i2c Linux driver for the DesignWare i2c block of Synopsys, which is meant
for AMBA Peripheral Bus. This i2c block is used on SoC chips like the ARM9
based PVG610.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-24 00:18:56 +01:00
Michael Trimarchi dc1972d027 i2c: Fix stuck transaction on cpm-i2c driver
When a process tries to read/write a disconnected i2c device, it receives a signal (e.g. ctrl-c) and the kernel gets stuck.

BUG: soft lockup - CPU#0 stuck for 61s! [I2CEEpromTest:392]
NIP: c01628f8 LR: c01628f0 CTR: c00177cc
REGS: c39abd70 TRAP: 0901   Not tainted  (2.6.25.7-alcore)
MSR: 00009032 <EE,ME,IR,DR>  CR: 42042048  XER: 20000000
TASK = c3889bd0[392] 'I2CEEpromTest' THREAD: c39aa000
GPR00: 00009000 c39abe20 c3889bd0 c39075c8 c39abe28 00000001 00000000 00000001
GPR08: c3889bd0 c39075c8 00009032 c39abe34 00002437
NIP [c01628f8] cpm_i2c_xfer+0x5fc/0x6d0
LR [c01628f0] cpm_i2c_xfer+0x5f4/0x6d0
Call Trace:
[c39abe20] [c0162924] cpm_i2c_xfer+0x628/0x6d0 (unreliable)
[c39abe90] [c015f6a0] i2c_transfer+0x88/0xb4
[c39abeb0] [c0160164] i2c_master_recv+0x48/0x6c
[c39abed0] [c01618dc] i2cdev_read+0x50/0xe4
[c39abef0] [c0068b24] vfs_read+0xc4/0x108
[c39abf10] [c0068f4c] sys_read+0x4c/0x90
[c39abf40] [c000d348] ret_from_syscall+0x0/0x38
Instruction dump:
3bc00064 92610010 3bf201c8 92810014 3b61

This happen because though the wait_event_interruptible_timeout takes the
signals into account, the driver does not handle them.
We propose to change the wait_event_interruptible_timeout with
wait_event_timeout, leaving the signals to be handled in other points
on the upper layers.

Signed-off-by: Bruno Morelli <bruno@evidence.eu.com>
Signed-off-by: Michael Trimarchi <michael@evidence.eu.com>
Acked-by: Jochen Friedrich <jochen@scram.de>
[ben-linux@fluff.org: fix title for patch]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 01:43:32 +01:00
Tony Lindgren ff0f242626 i2c-omap: Fix build breaking typo cpu_is_omap_2430
Hi Ben,

Can you please queue this fix?

Thanks,

Tony

>From ffe2b2cdf6283770b70a197e3748c6b40a1006be Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 17 Jun 2009 13:14:23 +0300
Subject: [PATCH] i2c-omap: Fix build breaking typo in cpu_is_omap_2430

Commit 84bf2c86 introduced a typo, it should be cpu_is_omap2430
instead. The typo was probably caused by a mismerge.

Without this patch all omaps fail to build with:
error: implicit declaration of function 'cpu_is_omap_2430'

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-22 01:43:32 +01:00
Linus Torvalds 5c6fb0059c Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: New macro to initialize i2c address lists on the fly
  i2c: Don't advertise i2c functions when not available
  i2c: Use rwsem instead of mutex for board info
  i2c: Add a sysfs interface to instantiate devices
  i2c: Limit core locking to the necessary sections
  i2c: Kill the redundant client list
  i2c: Kill is_newstyle_driver
  i2c: Merge i2c_attach_client into i2c_new_device
  i2c: Drop i2c_probe function
  i2c: Get rid of the legacy binding model
  i2c: Kill client_register and client_unregister methods
2009-06-19 17:45:51 -07:00
Rodolfo Giometti f18c41daea i2c: Use rwsem instead of mutex for board info
By using rwsem we can easily manage recursive calls of
i2c_scan_static_board_info() function without breaking the locking.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-19 16:58:20 +02:00
Jean Delvare 99cd8e2587 i2c: Add a sysfs interface to instantiate devices
Add a sysfs interface to instantiate and delete I2C devices. This is
primarily a replacement of the force_* module parameters implemented
by some i2c drivers. These module parameters were implemented
internally by the I2C_CLIENT_INSMOD* macros, which don't scale well.

This can also be used when developing a driver on a self-soldered
board which doesn't yet have proper I2C device declaration at the
platform level, and presumably for various debugging situations.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-06-19 16:58:20 +02:00
Jean Delvare 35fc37f818 i2c: Limit core locking to the necessary sections
The i2c-core code tends to hold the core lock for longer than it
should. Limit locking to the necessary sections for both performance
and clarity. This is also a requirement to support I2C multiplexers in
the future.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-06-19 16:58:19 +02:00
Jean Delvare e549c2b54d i2c: Kill the redundant client list
We used to maintain our own per-adapter list of i2c clients, but this
is redundant with what the driver core does, and no longer needed.
Just drop the redundant list.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-06-19 16:58:19 +02:00
Jean Delvare 1e40ac12da i2c: Kill is_newstyle_driver
Legacy i2c drivers are gone, all drivers are new-style now, so there
is no point to check.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-06-19 16:58:19 +02:00
Jean Delvare f8a227e8ac i2c: Merge i2c_attach_client into i2c_new_device
Now that i2c_attach_client is no longer exported, it doesn't need to
be a separate function. Merge it into its only user, i2c_new_device.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-06-19 16:58:18 +02:00
Jean Delvare 36789b5ea5 i2c: Drop i2c_probe function
The legacy i2c_probe() function has no users left, get rid of it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-06-19 16:58:18 +02:00
Jean Delvare 729d6dd571 i2c: Get rid of the legacy binding model
We converted all the legacy i2c drivers so we can finally get rid of
the legacy binding model. Hooray!

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-06-19 16:58:18 +02:00
Jean Delvare 352da9820e i2c: Kill client_register and client_unregister methods
These methods were useful in the legacy binding model but no longer in
the new (standard) binding model. There are no users left so we can
drop them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-06-19 16:58:17 +02:00
Benjamin Herrenschmidt b71a107c66 Merge commit 'gcl/merge' into next
Manual merge of:
	drivers/net/fec_mpc52xx.c
2009-06-18 11:22:08 +10:00
Wolfgang Denk 87c441e54d powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency,
while MPC52xx used mpc52xx_find_ipb_freq().  Despite the different
clock names (IPS vs. IPB) the code was identical.

Use common code for both processor families.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-17 00:30:22 -06:00
Linus Walleij 4eaad8ad29 i2c-stu300: Make driver depend on MACH_U300
This makes the stu300 driver for the ST Micro ST DDC I2C bus
driver depend on MACH_U300, new platforms reusing this I2C
driver will need to add in a similar dependency.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
[ben-linux@fluff.org: re-aranged subject line]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 22:42:17 +01:00
Ben Dooks 933a2aec8d i2c-s3c2410: use resource_size()
Change the usage of res->end-res->start to resource_size(), missed
by the last patch to change this.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 22:42:16 +01:00
Linus Walleij c6ffddea36 i2c: Use resource_size macro
This replace all instances in the i2c busses tree of
res->end - res->start + 1 with the handy macro resource_size(res)
from ioport.h (coming in from platform_device.h).

This was created with a simple
sed -i -e 's/\([a-z]*\)->end *- *[a-z]*->start *+ *1/resource_size(\1)/g'

Then manually replacing the PXA redefiniton of the same kind
of macro manually. Recompiled some ARM defconfigs I could find to
make a rough test so it shouldn't break anything, though I
couldn't see exactly which configs you need for all the drivers.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 22:42:16 +01:00
Linus Walleij 18904c0ecd i2c: ST DDC I2C U300 bus driver v3
This adds support for the ST Microelectronics DDC I2C bus
driver. This bus is used in the U300 architecture recently
added to RMK:s ARM tree.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Reviewed-by: Ben Dooks <ben-linux@fluff.org>
Reviewed-by: Jean Delvare <khali@linus-fr.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 22:42:16 +01:00
Mike Frysinger 6df263cf2e i2c-bfin-twi: pull in io.h for ioremap()
Rather than relying on some of the headers implicitly pulling in io.h,
pull it in explicitly our self for ioremap() and friends.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 22:42:15 +01:00
Linus Torvalds 4858704da7 Merge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  therm_windtunnel: Convert to a new-style i2c driver
  therm_adt746x: Convert to a new-style i2c driver
  windfarm: Convert to new-style i2c drivers
  therm_pm72: Convert to a new-style i2c driver
  i2c-viapro: Add new PCI device ID for VX855
  i2c/chips: Move max6875 to drivers/misc/eeprom
  i2c: Do not give adapters a default parent
  i2c: Do not probe for TV chips on Voodoo3 adapters
  i2c: Retry automatically on arbitration loss
  i2c: Remove void casts
2009-06-16 11:29:17 -07:00
Linus Torvalds 0fa213310c Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (103 commits)
  powerpc: Fix bug in move of altivec code to vector.S
  powerpc: Add support for swiotlb on 32-bit
  powerpc/spufs: Remove unused error path
  powerpc: Fix warning when printing a resource_size_t
  powerpc/xmon: Remove unused variable in xmon.c
  powerpc/pseries: Fix warnings when printing resource_size_t
  powerpc: Shield code specific to 64-bit server processors
  powerpc: Separate PACA fields for server CPUs
  powerpc: Split exception handling out of head_64.S
  powerpc: Introduce CONFIG_PPC_BOOK3S
  powerpc: Move VMX and VSX asm code to vector.S
  powerpc: Set init_bootmem_done on NUMA platforms as well
  powerpc/mm: Fix a AB->BA deadlock scenario with nohash MMU context lock
  powerpc/mm: Fix some SMP issues with MMU context handling
  powerpc: Add PTRACE_SINGLEBLOCK support
  fbdev: Add PLB support and cleanup DCR in xilinxfb driver.
  powerpc/virtex: Add ml510 reference design device tree
  powerpc/virtex: Add Xilinx ML510 reference design support
  powerpc/virtex: refactor intc driver and add support for i8259 cascading
  powerpc/virtex: Add support for Xilinx PCI host bridge
  ...
2009-06-15 09:32:52 -07:00
Harald Welte a231591f04 i2c-viapro: Add new PCI device ID for VX855
The south bridge of the VIA VX855 chipset has a different PCI Device ID
so i2c-viapro.c needs to be updated with this.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15 18:01:49 +02:00
Wolfram Sang 4b364f230a i2c/chips: Move max6875 to drivers/misc/eeprom
This driver only reads the user EEPROM of that chip, so we can move it
to the eeprom-directory in order to further clean up (and later remove)
drivers/i2c/chips.

The Kconfig text was updated to match the current functionality,
dropping the meanwhile obsoleted parts.

Defconfigs have been adapted.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Ben Gardner <gardner.ben@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15 18:01:49 +02:00
Jean Delvare c52cf01f5b i2c: Do not give adapters a default parent
We don't need to give adapters a parent if they don't have one. The
driver core will put them in the virtual device directory and all will
be fine.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15 18:01:48 +02:00
Jean Delvare fa1b2ca4fa i2c: Do not probe for TV chips on Voodoo3 adapters
There's no point in giving the I2C bus of Voodoo3 adapters a class
value, there's no video chip driver checking for it anymore. If
support is ever needed, the video device should be instantiated
explicitly rather than probed.

To the best of my knowledge the only video chip that can be found on
these boards is a BT869 video encoder, for which no support exists
currently.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
2009-06-15 18:01:48 +02:00
Clifford Wolf 66b650f045 i2c: Retry automatically on arbitration loss
Some small changes in i2c core to retry i2c xfers until either the
maximum number of retries or the timeout is hit.

Signed-off-by: Clifford Wolf <clifford@clifford.at>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15 18:01:46 +02:00
Jack Stone 1cf92b453a i2c: Remove void casts
Remove uneeded void casts.

Signed-off-by: Jack Stone <jwjstone@fastmail.fm>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15 18:01:46 +02:00
Benjamin Herrenschmidt 7dafd239ab Merge commit 'origin/master' into next 2009-06-15 10:36:54 +10:00
Linus Torvalds 2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Richard Röjfors dd14be4c27 i2c-ocores: Can add I2C devices to the bus
There is sometimes a need for the ocores driver to add devices to the
bus when installed.

i2c_register_board_info can not always be used, because the I2C devices
 are not known at an early state, they could for instance be connected
 on a I2C bus on a PCI device which has the Open Cores IP.

i2c_new_device can not be used in all cases either since the resulting
bus nummer might be unknown.

The solution is the pass a list of I2C devices in the platform data to
the Open Cores driver. This is useful for MFD drivers.

Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:28 +01:00
Ben Dooks 7d85ccd816 i2c-s3c2410: move to using platform idtable to match devices
Change to using platform id table to match either of the two supported
platform device names in the driver. This simplifies the driver init and
exit code

Note, log messages will now be prefixed with 's3c-i2c' instead of the
driver name, so output will be of the form of:

s3c-i2c s3c2440-i2c.0: slave address 0x10

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:26 +01:00
Aaro Koskinen 84bf2c868f i2c: OMAP3: Better noise suppression for fast/standard modes
Use longer noise filter period for fast and standard mode. Based on an
earlier patch by Eero Nurkkala.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:26 +01:00
Aaro Koskinen baf46b4e37 i2c: OMAP2/3: Fix scll/sclh calculations
Fix scll/sclh calculations for HS and fast modes. Currently the driver
uses equal (roughly) low/high times which will result in too short
low time.

OMAP3430 TRM gives the following equations:

	F/S: tLow  = (scll + 7) * internal_clk
	     tHigh = (sclh + 5) * internal_clk
	HS:  tLow  = (scll + 7) * fclk
	     tHigh = (sclh + 5) * fclk

Furthermore, the I2C specification sets the following minimum values
for HS tLow/tHigh for capacitive bus loads 100 pF (maximum speed 3400)
and 400 pF (maximum speed 1700):

	speed	tLow		tHigh
	3400	160 ns		60 ns
	1700	320 ns		120 ns

and for F/S:

	speed	tLow		tHigh
	400	1300 ns		600 ns
	100	4700 ns		4000 ns

By using duty cycles 33/66 (HS, F) and 50/50 (S) we stay above these
minimum values.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Michael Hennerich e0cd2dd5dd i2c: Blackfin TWI: implement I2C_FUNC_SMBUS_I2C_BLOCK functionality
Some drivers need i2c_smbus_read_i2c_block_data() functionality, so add
support for it to the Blackfin I2C bus driver.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[ben-linux@fluff.org: shortened subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Frank Shew 94327d009e i2c: Blackfin TWI: fix transfer errors with repeat start
We have a custom BF537 board with an I2C RTC (MAX DS3231) running
uclinux 2007R1 for some time. Recently during migration to 2008R1.5-RC3
we losted access to the RTC. The RTC driver calls 'i2c_transfer()' which
in turns calls 'bfin_twi_master_xfer()' in i2c-bfin-twi.c.

Compared with 2007R1, it looks like the 2008R1.5 version of i2c-bin-twi.c
has a new mode 'TWI_I2C-MODE_REPEAT' which corresponds to the Repeat Start
Condition described in the HRM. However, according to the HRM, at XMIT or
RECV interrupt and when the data count is 0, not only is the RESTART bit
supposed to be set, but MDIR must also be set if the next operation is a
receive sequence, and cleared if not. Currently there is no code that looks
at the I2C_M_RD bit in the flag from the next cur_msg and set/clear the MDIR
flag accordingly at the same time that the RSTART bit is set. Instead, MDIR
is set or cleared (by OR'ing with 0?) after the RESTART bit has been cleared
during handling of MCOMP interrupt.

It appears that this is causing our failure with reading the RTC, as a
quick patch to set/clear MDIR when RESTART is set seem to solve our problem.

Signed-off-by: Frank Shew <fshew@geometrics.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
[ben-linux@fluff.org: shorted subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Sonic Zhang 57a8f32eaf i2c: Blackfin TWI: fix REPEAT START mode doesn't repeat
Avoid rewrite TWI MASTER_CTL reg when issue next message
In i2c repeat transfer mode, byte count of next message should be filled
into part of the TWI MASTER_CTL reg when interrupt MCOMP of last
message transfer is triggered. But, other bits in this reg should
not be touched.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
[ben-linux@fluff.org: shorted subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Michael Hennerich 9528d1c7a5 i2c: Blackfin TWI: make sure we don't end up with a CLKDIV=0
Make sure we don't end up with an invalid CLKDIV=0 in case someone
specifies 20kHz SCL or less (5 * 1024 / 20 = 0x100).

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
[ben-linux@fluff.org: shortened subject line]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-13 10:39:25 +01:00
Benjamin Herrenschmidt bc47ab0241 Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/kernel/asm-offsets.c
2009-06-12 16:53:38 +10:00
Eric Miao f0a8370139 [ARM] pxa: move mach/i2c.h to plat/i2c.h
Signed-off-by: Paul Shen <paul.shen@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:01 +08:00
Eric Miao f23d491131 [ARM] pxa: add platform device ID table to pxa i2c driver
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:21:42 +08:00
Sean MacLennan 9d2c0f67c8 i2c: Fix confusing i2c-ibm_iic message
The i2c-ibm_iic driver printed messages in an odd order that seemed
to list devices before the driver was probed.

Here is an example:

at24 0-0052: 512 byte 24c04 EEPROM (writable)
ibm-iic ef600700.i2c: using standard (100 kHz) mode
ad7414 0-004a: chip found

This changes the order to print the i2c driver message before scanning
for devices so that the logs show the driver, then the devices. 

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-04 08:59:24 -04:00
Paul Mundt 464c9e1037 Merge branch 'sh/clkfwk' 2009-05-26 23:50:40 +09:00
Paul Mundt af777ce42d sh: clkfwk: module_clk -> peripheral_clk rename.
For consistenct naming, and to allow us to fix up some confusion in the
SH-Mobile clock framework, amongst other places.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13 16:59:40 +09:00
Linus Torvalds 816dc3c82b Merge branch 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux
* 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL
  i2c: Enable i2c-s3c2410 for S3C64XX too
  i2c-mpc: bug fix for MPC52xx clock setting and printout
  i2c-pxa.c: timeouts off by 1
2009-05-12 11:21:51 -07:00
Mark Ware 36521c271e i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL
Recent DMA changes result in a BUG() when NULL is passed to
dma_alloc_coherent in place of a device.

Signed-off-by: Mark Ware <mware@elphinstone.net>
[ben-linux@fluff.org: fix patch moves]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12 00:36:04 +01:00
Mark Brown 89bc5d4a91 i2c: Enable i2c-s3c2410 for S3C64XX too
This controller is also present on the S3C64xx series processors so
enable the driver in Kconfig for those platforms.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12 00:36:03 +01:00
Wolfgang Grandegger 1904b03430 i2c-mpc: bug fix for MPC52xx clock setting and printout
The clock setting did not work for the MPC52xx due to a stupid bug.
Furthermore, the dev info output "clock=0" for old device trees was
misleading. This patch fixes both issues.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12 00:35:56 +01:00
Enrik Berkhan 2196d1cf4a i2c-algo-pca: Let PCA9564 recover from unacked data byte (state 0x30)
Currently, the i2c-algo-pca driver does nothing if the chip enters state
0x30 (Data byte in I2CDAT has been transmitted; NOT ACK has been
received).  Thus, the i2c bus connected to the controller gets stuck
afterwards.

I have seen this kind of error on a custom board in certain load
situations most probably caused by interference or noise.

A possible reaction is to let the controller generate a STOP condition.
This is documented in the PCA9564 data sheet (2006-09-01) and the same
is done for other NACK states as well.

Further, state 0x38 isn't handled completely, either. Try to do another
START in this case like the data sheet says. As this couldn't be tested,
I've added a comment to try to reset the chip if the START doesn't help
as suggested by Wolfram Sang.

Signed-off-by: Enrik Berkhan <Enrik.Berkhan@ge.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-05-05 08:39:25 +02:00