In case of error, the function anon_inode_getfile() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Format the multi-line comments in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove all the unnecessary includes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI device id is only used in the device table. Remove the
define and just open code the device id.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The (*insn_read) and (*insn_write) functions for all the subdevices
in this driver are the same except for the 'offset' that is added
to the iobase and channel to read/write a register on the board.
Pass the 'offset' in s->private so we can use the same (*insn_read)
and (*insn->write) functions for all the subdevices.
Also, fix the (*insn_read) and (*insn_write) functions so they work
correctly. The comedi core expects them to read/write insn->n data
values and then return the number of values used.
For aesthetic reasons, add some whitespace to the subdevice init.
Remove the dev_info() noise at the end of the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The low-level i/o functions in this driver simply read/write a
register based on the channel in insn->chanspec and an offset.
Create a macro, PCI8164_AXIS(), that takes the channel number as
a parameter and returns the register value.
Remove the switch() statements used to figure out the 'axis_reg'
and use the new macro instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_dbg() messages in the adl_pci8164_insn_{read,out} functions
output the 'data' that was read/write to the device. Two 'data' values
are always printed, data[0] and data[1].
The 'data' pointer points to an array of unsigned int values. The number
of values in the array is indicated by insn->n. The number of data
elements is never checked so the dev_dbg() could be trying to access
a 'data' element that is invalid.
Instead of fixing the dev_dbg() just remove them. They are really just
added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the bus specific code split out, the device id in the boardinfo
is no longer needed. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vendor/device ids in the boardinfo are not longer needed. Remove
them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver only uses the boardinfo to get the dev->board_name.
Just use the dev->driver->driver_name and remove the unnecessary
boardinfo completely.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only one board type is supported by this driver. Remove the 'interrupt'
field from the boardinfo and just call the function directly in
v_ADDI_Interrupt().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the users of the addi_common code now set the dev->board_ptr
before calling addi_auto_attach(). Remove the unnecessary function
that searches for the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE()
to PCI_VDEVICE(). This allows passing the enum as the next field.
Set the dev->board_ptr before calling addi_auto_attach(). This
removes the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary board
information from the comedi_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE()
to PCI_VDEVICE(). This allows passing the enum as the next field.
Set the dev->board_ptr before calling addi_auto_attach(). This
removes the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary board
information from the comedi_driver.
For aesthetic reasons, move the pci device table near the pci_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver only supports a single PCI device. If we set the
dev->board_ptr before calling addi_auto_attach() we remove
the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary
board information from the comedi_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver only supports a single PCI device. If we set the
dev->board_ptr before calling addi_auto_attach() we remove
the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary
board information from the comedi_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver only supports a single PCI device. If we set the
dev->board_ptr before calling addi_auto_attach() we remove
the need for the common code to search for the boardinfo.
Since the search is not done we can remove the unnecessary
board information from the comedi_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The addi_apci_035, addi_apci_1500, addi_apci_1564, and addi_apci_3xxx
drivers still use the addi_common code. Allow those drivers to set
the dev->board_ptr before calling addi_auto_attach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE()
to PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'devid' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI
device.
Cleanup some of the comments to describe the usage of the 'context'
in the (*auto_attach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the pci_driver
declaration.
Also, move the pci device table near the pci_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro is not used, remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro relies on a local variable having a specific name and
returns an object that variable points to. This object is the
boardinfo used by the driver.
The comedi core provides the comedi_board() helper to return a
const pointer to the boardinfo. Remove the 'boardtype' macro and
fix all the users of the 'boardtype' macro to use the comedi_board()
helper to get the const boardinfo pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data. A couple of the entries in the boardinfo
are #if 0'ed out due to unknown device ids. Add the enums for them
also but comment them out.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Remove the dev_info function trace noise in the attach.
Use the boardinfo 'board' pointer instead of accessing the data directly
with the 'boardtype' macro in the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro relies on a local variable having a specific name and
derives a pointer from that local variable.
It's only used in the attach and we already have the local variable
'board' that has the same information. Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This local helper function is a duplicate of the comedi core
privided comedi_board() helper. Use that function instead and
use a local variable to hold the boardinfo pointer instead of
calling the helper each time the boardinfo is accessed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since we now have a local variable in the attach that has the boardinfo
pointer, use that instead of calling the local board() helper function
each time the boardinfo is accessed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the pci_driver
declaration.
Also, move the pci device table near the pci_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'dev_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
For aesthetic reasons, add some whitespace to the boardinfo.
Remove the now unnecessary 'this_board' macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the pci_driver
declaration.
Also, move the pci device table near the pci_driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
The me-2600i needs to have firmware uploaded to the board. Add a new
field to the boardinfo, 'needs_firmware', to indicate this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well the
search function that was used to locate the boardinfo for the PCI device.
Since the PCI device ids are now only used in the id_table, remove the
defines and open code the device ids.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well
the search function that was used to locate the boardinfo for the PCI
device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well
the search function that was used to locate the boardinfo for the PCI
device.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'vendor_id' and 'device_id' data from the
boardinfo as well the search function that was used to locate the
boardinfo for the PCI device.
The pci1753 and pci1753e boards have the same vendor/device id so it
is impossible to determine which board is actually detected. The
boardinfo for the boards is quite different. Group them in the same
enum index in the boardinfo table and #if out the information with
USE_PCI1753E_BOARDINFO. Until a better solution is worked out, this
will allow the driver to be compiled to support the pci1753 (default)
or pci1752e.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create an enum to the boardinfo and pass that enum in the pci_driver
id_table as the driver_data.
Change the macro used to fill in the device table from PCI_DEVICE() to
PCI_VDEVICE(). This allows passing the enum as the next field.
This allows removing the 'device_id' data from the boardinfo as well
the search function that was used to locate the boardinfo for the
PCI device.
The pci1710 and pci1710hg boards have the same vendor/device id so
it is impossible to determine which board is actually detected. The
boardinfo for the pci1710hg is identical to the pci1710 other than
the analog input range information. Remove the pci1710hg information
and #if out the range tables for that device with the define
USE_PCI1710HG_RANGE. Modify the pci1710 boardinfo accordingly to
use the same define to determine which range table to use. Until a
better solution is worked out, this will allow the driver to be
compiled to support the pci1710 (default) or pci1710hg.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Yongjun
Masanari Iida
H Hartley Sweeten