Replacing mistyped "buad" with "baud" where applicable.
Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Both csum_partial() and the csum_partial_copy*() family of routines
forget to do a final fold on the computed checksum value on sparc64.
So do the standard Sparc "add + set condition codes, add carry"
sequence, then make sure the high 32-bits of the return value are
clear.
Based upon some excellent detective work and debugging done by
Richard Braun and Samuel Thibault.
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver is selectable on other than Au1200 Alchemy systems but won't
build nor work - there is no MMC hw.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] scsi_lib.c: properly count the number of pages in scsi_req_map_sg()
[SCSI] scsi_transport_sas: make write attrs writeable
[SCSI] scsi_transport_sas; fix user_scan
[SCSI] ppa: fix for machines with highmem
[SCSI] mptspi: reset handler shouldn't be called for other bus protocols
[SCSI] Blacklist entry for HP dat changer
When snd_cwnd is smaller than 38 and the connection is in
congestion avoidance phase (snd_cwnd > snd_ssthresh), the snd_cwnd
seems to stop growing.
The additive increase was confused because C array's are 0 based.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 3540/1: ixp23xx: deal with gap in interrupt bitmasks
[ARM] 3539/1: ixp23xx: fix __arch_ixp23xx_is_coherent() for A1 stepping
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Fix D-cache corruption in mremap
[SPARC64]: Make smp_processor_id() functional before start_kernel()
Patch from Lennert Buytenhek
On the ixp23xx, the microengine thread interrupt sources are numbered
56..119, but their mask/status bits are located in bit positions 64..127
in the various registers in the interrupt controller (bit positions
56..63 are unused.)
We don't deal with this, so currently, when asked to enable IRQ 64, we
will enable IRQ 56 instead.
The only interrupts >= 64 are the thread interrupt sources, and there
are no in-tree users of those yet, so this is fortunately not a big
problem, but this needs fixing anyway.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Lennert Buytenhek
The current __ixp23xx_arch_is_coherent() check assumes that the
lower byte of IXP23XX_PRODUCT_ID is identical to the lower byte of
processor_id, but this is not the case, and because of this we were
incorrectly enabling coherency on A1 stepping CPUs.
Stepping A1 of the ixp2350, which has a PRODUCT_ID of 0x401, has '02'
in the lower byte of processor_id, while A2, with a PRODUCT_ID of
0x402, has '04' in the lower byte of processor_id.
So, to check for >= A2, we really need to check the lower byte of
processor_id against >= 4.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
mm/slab.c's offlab_limit logic is totally broken.
Firstly, "offslab_limit" is a global variable while it should either be
calculated in situ or should be passed in as a parameter.
Secondly, the more serious problem with it is that the condition for
calculating it:
if (!(OFF_SLAB(sizes->cs_cachep))) {
offslab_limit = sizes->cs_size - sizeof(struct slab);
offslab_limit /= sizeof(kmem_bufctl_t);
is in total disconnect with the condition that makes use of it:
/* More than offslab_limit objects will cause problems */
if ((flags & CFLGS_OFF_SLAB) && num > offslab_limit)
break;
but due to offslab_limit being a global variable this breakage was
hidden.
Up until lockdep came along and perturbed the slab sizes sufficiently so
that the first off-slab cache would still see a (non-calculated) zero
value for offslab_limit and would panic with:
kmem_cache_create: couldn't create cache size-512.
Call Trace:
[<ffffffff8020a5b9>] show_trace+0x96/0x1c8
[<ffffffff8020a8f0>] dump_stack+0x13/0x15
[<ffffffff8022994f>] panic+0x39/0x21a
[<ffffffff80270814>] kmem_cache_create+0x5a0/0x5d0
[<ffffffff80aced62>] kmem_cache_init+0x193/0x379
[<ffffffff80abf779>] start_kernel+0x17f/0x218
[<ffffffff80abf263>] _sinittext+0x263/0x26a
Kernel panic - not syncing: kmem_cache_create(): failed to create slab `size-512'
Paolo Ornati's config on x86_64 managed to trigger it.
The fix is to move the calculation to the place that makes use of it.
This also makes slab.o 54 bytes smaller.
Btw., the check itself is quite silly. Its intention is to test whether
the number of objects per slab would be higher than the number of slab
control pointers possible. In theory it could be triggered: if someone
tried to allocate 4-byte objects cache and explicitly requested with
CFLGS_OFF_SLAB. So i kept the check.
Out of historic interest i checked how old this bug was and it's
ancient, 10 years old! It is the oldest hidden and then truly triggering
bugs i ever saw being fixed in the kernel!
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update documentation to match reality. INPCK controls whether input
parity checking is enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
If we move a mapping from one virtual address to another,
and this changes the virtual color of the mapping to those
pages, we can see corrupt data due to D-cache aliasing.
Check for and deal with this by overriding the move_pte()
macro. Set things up so that other platforms can cleanly
override the move_pte() macro too.
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the incorrect calculation of how much to zero out in struct cm4000_dev
on device initialization.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
The result of pcmcia_get_socket() may be NULL but ds_event() uses it
without checking.
Coverity CID: 436.
Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Now that we select busy_rr for possible service, insert entries at the
back of that list instead of at the front.
Signed-off-by: Jens Axboe <axboe@suse.de>
The calculation of nr_pages in scsi_req_map_sg() doesn't account for
the fact that the first page could have an offset that pushes the end
of the buffer onto a new page.
Signed-off-by: Bryan Holty <lgeek@frontiernet.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
There's a small window from when the timer is entered and we grab
the queue lock, where cfq_set_active_queue() could be rearming the
timer for us. Seen in the wild on a 12-way ppc box. Fix this by
just using mod_timer(), which will do the right thing for us.
Signed-off-by: Jens Axboe <axboe@suse.de>
If the hardware is doing real queueing, decide that it's worthless to
idle the hardware. It does reasonable simultaneous io in that case
anyways, and the idling hurts some work loads.
Signed-off-by: Jens Axboe <axboe@suse.de>
If we are anticipating a sync request from this process and we are
waiting for that and see an async request come in, expire that slice
and move on.
Signed-off-by: Jens Axboe <axboe@suse.de>
For just one busy queue (like async write out), we often overlooked
that we could queue more io and decided we were idle instead. This causes
us quite a bit of performance loss.
Signed-off-by: Jens Axboe <axboe@suse.de>
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
[MIPS] Treat R14000 like R10000.
[MIPS] Remove EXPERIMENTAL from PAGE_SIZE_16KB
[MIPS] Update/Fix instruction definitions
[MIPS] DSP and MDMX share the same config flag bit.
[MIPS] Fix deadlock on MP with cache aliases.
[MIPS] Use generic STABS_DEBUG macro.
[MIPS] Create consistency in "system type" selection.
[MIPS] Use generic DWARF_DEBUG
[MIPS] Fix kgdb exception handler from user mode.
[MIPS] Update struct sigcontext member names
[MIPS] Update/fix futex assembly
[MIPS] Remove support for sysmips(2) SETNAME and MIPS_RDNVRAM operations.
[MIPS] Fix detection and handling of the 74K processor.
[MIPS] Add missing 34K processor IDs
[MIPS] Fix marking buddy of pte global for MIPS32 w/36-bit physical address
[MIPS] AU1xxx mips_timer_interrupt() fixes
[MIPS] Fix typo
A small bugfix for up to now unused instruction definitions, and a
somewhat larger update to cover MIPS32R2 instructions.
Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
A proper fix would involve introducing the notion of shared caches but
at this stage of 2.6.17 that's going to be too intrusive and not needed
for current hardware; aside I think some discussion will be needed.
So for now on the affected SMP configurations which happen to suffer from
cache aliases we make use of the fact that a single cache will be shared
by all processors. This solves the deadlock issue and will improve
performance by getting rid of the smp_call_function overhead.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The "system type" Kconfig options on MIPS are not consistent. For
some platforms, only the name is listed while other entries are
prepended with "Support for". Remove this as it doesn't make sense
when describing the "system type".
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When debugging a kernel compiled by gcc 4.1 with gdb 6.4, gdb could
not show filename, linenumber, etc. It seems fixed if I used generic
DWARF_DEBUG macro. Although gcc 3.x seems work without this change,
it would be better to use the generic macro unless there were
something MIPS specific.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Rename the 64-bit sc_hi and sc_lo arrays to use the same names
as the 32-bit struct sigcontext (sc_mdhi, sc_hi1, et cetera).
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
o Implement futex_atomic_op_inuser() operation
o Don't use the R10000-ll/sc bug workaround version for every processor.
branch likely is deprecated and some historic ll/sc processors don't
implement it. In any case it's slow.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
SETNAME only had a minor defect but probably never had a user and
MIPS_RDNVRAM was unimplemented anyway.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Nothing exciting; Linux just didn't know it yet so this is most adding
a value to a case statement.
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In case of CONFIG_64BIT_PHYS_ADDR, set_pte() and pte_clear() functions
only set _PAGE_GLOBAL bit in the pte_low field of the buddy PTEs,
forgetting to propagate ito to pte_high. Thus, the both pages might not
really be made global for the CPU (since it AND's the G-bit of the
odd / even PTEs together to decide whether they're global or not). Thus,
if only a single page is allocated via vmalloc() or ioremap(), it's not
really global for CPU (and it must be, since this is kernel mapping),
and thus its ASID is compared against the current process' one -- so,
we'll get into trouble sooner or later... Also, pte_none() will fail
on global pages because _PAGE_GLOBAL bit is set in both pte_low and
pte_high, and pte_val() will return u64 value consisting of those fields
concateneted.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
common/au1000/irq.c was missing a mips_timer_interrupt() prototype,
whereas in common/au1000/time.c the actual mips_timer_interrupt()
implementation was missing an irq_exit() invocation, causing a
preempt_count() leak.
Signed-off-by: Herbert Valerio Riedel <hvr@hvrlab.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The ARM Architecture Reference Manual lists bit 4 of the PMD as "implementation
defined" and it must be set to zero on Intel XScale CPUs or the cache does
not behave properly. Found by Mike Rapoport while debugging a flash issue
on the PXA255:
http://marc.10east.com/?l=linux-arm-kernel&m=114845287600782&w=1
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
From: Andrew Morton <akpm@osdl.org>
Move the forward decl outside the ifdef, since we use it in both legs.
Should fix the spacr64 build error reported in
http://bugzilla.kernel.org/show_bug.cgi?id=6625
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: Cedric Pellerin <cedric@bidouillesoft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
From: NeilBrown <neilb@suse.de>
If an error is reported by a drive in a RAID array (which is done via
bi_end_io - in interrupt context), we call md_error and md_new_event which
calls sysfs_notify. However sysfs_notify grabs a mutex and so cannot be
called in interrupt context.
This patch just creates a variant of md_new_event which avoids the sysfs
call, and uses that. A better fix for later is to arrange for the event to
be called from user-context.
Note: avoiding the sysfs call isn't a problem as an error will not, by
itself, modify the sync_action attribute. (We do still need to
wake_up(&md_event_waiters) as an error by itself will modify /proc/mdstat).
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
From: Jeremy Higdon <jeremy@sgi.com>
This patch fixes a bug in sgiioc4 where it was using the default IDE port
I/O operations instead of MMIO.
The IDE part of the IOC4 chip uses MMIO to map the chip registers.
Unfortunately, the sgiioc4 driver uses the default port IO operations,
which happens to have worked for the past few years. That's about to
change, however, thus this change from inX/outX to readX/writeX.
Signed-off-by: Jeremy Higdon <jeremy@sgi.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
From: Martin Michlmayr <tbm@cyrius.com>
Fix the following compilation error:
CC drivers/video/maxinefb.o
drivers/video/maxinefb.c:58: warning: initializer-string for array of chars is too long
drivers/video/maxinefb.c:58: warning: (near initialization for \u2018maxinefb_fix.id\u2019)
drivers/video/maxinefb.c:110: error: unknown field \u2018fb_get_fix\u2019 specified in initializer
drivers/video/maxinefb.c:110: error: \u2018gen_get_fix\u2019 undeclared here (not in a function)
drivers/video/maxinefb.c:111: error: unknown field \u2018fb_get_var\u2019 specified in initializer
drivers/video/maxinefb.c:111: error: \u2018gen_get_var\u2019 undeclared here (not in a function)
make[2]: *** [drivers/video/maxinefb.o] Error 1
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
From: Rodolfo Giometti <giometti@linux.it>
Fix the following warning on compilation:
drivers/video/au1100fb.c: In function `au1100fb_fb_setcolreg':
drivers/video/au1100fb.c:219: warning: ISO C90 forbids mixed declarations and code
drivers/video/au1100fb.c: In function `au1100fb_fb_pan_display':
drivers/video/au1100fb.c:321: warning: ISO C90 forbids mixed declarations and code
drivers/video/au1100fb.c: In function `au1100fb_fb_mmap':
drivers/video/au1100fb.c:387: warning: ISO C90 forbids mixed declarations and code
drivers/video/au1100fb.c: In function `au1100fb_drv_probe':
drivers/video/au1100fb.c:471: warning: unsigned int format, long unsigned int arg (arg 2)
drivers/video/au1100fb.c: At top level:
drivers/video/au1100fb.c:617: warning: initialization from incompatible pointer type
drivers/video/au1100fb.c:618: warning: initialization from incompatible pointer type
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Prevent calling of some platform functions on the clock chips of the eMac
as it seems to cause it to lockup at boot. For now, add a quirk to prevent
that from happening. Later, I might find out what's wrong and fix it but
that doesn't seem to be important as the machine appear to work fine
without running those. It's possible that Darwin doesn't run them.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Nathan Pilatzke <nathanpilatzke@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
From: Stephen Hemminger <shemminger@osdl.org>
I want to use the hrtimer's in the netem (Network Emulator) qdisc. But the
necessary symbols aren't exported for module use.
Also needed by SystemTap.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Stone, Joshua I" <joshua.i.stone@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
From: Andrew Morton <akpm@osdl.org>
Revert commit ff4da2e262.
It broke APM suspend, probably because APM doesn't switch back to a VT
when suspending.
Tracked down by Matt Mackall <mpm@selenic.com>
Rafael sayeth:
"It only fixed the theoretical issue that a quick-handed user could
switch to X after processes have been frozen and before the devices
are suspended.
With the current userland suspend tools it shouldn't be necessary."
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Horst Schirmeier