Commit Graph

134 Commits

Author SHA1 Message Date
Hans de Goede faf9b61632 [PATCH] hwmon: abituguru timeout fixes
This patch contains 2 sets of fixes for the abituguru:
 1) Much improved timeout handling, drasticly reducing the amount of
    timeout errors on some motherboards
 2) Fix the exit paths in the bank1 sensor type detect code to always
    restore the original settings even on an error. Without this our
    special test settings could remain seriously confusing the system
    BIOS's setup menu.

Both are very much related and are must haves, to avoid messing up the
uguru CMOS settings.

Detailed changes:
- Much improved timeout / wait for status handling. Many thanks to Sunil
  Kumar, for all his testing, ideas and patches! The code now first busy
  waits, polling the uguru for the expected status as this usually
  succeeds pretty quickly (within 90 reads). To avoid unnecessary CPU burn
  in timeout conditions, the amount of busy waiting has been halved from
  previous versions (120 tries instead of 250). This is not a problem,
  because this version goes to sleep after 120 attemps for 1 jiffy and
  then tries again, it does this sleep and try again 5 times before
  finally giving up. This (almost?) completly removes the timeout errors
  some people have seen regulary. Apparently some older uguru versions
  sometimes are distracted for a (relatively) long time. This solves this.
- These timeout errors not only occur in the sending address part of
  reading the uguru but also in the wait for read state, so errors in
  this state are now handled as retryable just like send address state
  errors and are only logged and reported to userspace if 3 executive
  tries fail.
- Fix a very nasty bug in the bank1 sensor type detection code, where it
  would not restore the original settings in any of the error paths!
- Since not successfully restoring the original settings can seriously
  confuse the system BIOS (hang when entering the relevant setup menu),
  we now try restoring them 3 times before giving up.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-26 13:05:19 -07:00
Hans de Goede 9b2ad12982 [PATCH] hwmon: Fix for first generation Abit uGuru chips
Now that the abituguru driver is seeing some more widespread testing
it has turned out that one the first generation of Abit uGuru
motherboards, with uGuru revision 1, the autodetect bank1 sensor type
code doesn't (always) work. This patch adds a module param to override
the autodetect, and it adds validity checks for the value of the 2
other autodetection override module params. An example of howto use
the new param can be found here:
http://lm-sensors.org/wiki/Configurations/Abit/AN7

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12 15:43:07 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Andreas Mohr d6e05edc59 spelling fixes
acquired (aquired)
contiguous (contigious)
successful (succesful, succesfull)
surprise (suprise)
whether (weather)
some other misspellings

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26 18:35:02 +02:00
Rudolf Marek 6af586dc58 [PATCH] hwmon-vid: Add support for Intel Core and Conroe
This patch adds support for two new VID codes, supporting Intel mobile Core
processors and new Conroe based platforms.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:36 -07:00
Kaiwan N Billimoria e1a8e913f9 [PATCH] lm70: New hardware monitoring driver
This driver implements support for the National Semiconductor LM70
temperature sensor.

The LM70 temperature sensor chip supports a single temperature sensor.
It communicates with a host processor (or microcontroller) via an
SPI/Microwire Bus interface.

Communication with the LM70 is simple: when the temperature is to be sensed,
the driver accesses the LM70 using SPI communication: 16 SCLK cycles
comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's
complement digital temperature (sent via the SIO line), is available in the
driver for interpretation. This driver makes use of the kernel's in-core
SPI support.

Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:35 -07:00
Jean Delvare 060b2f5584 [PATCH] hwmon: Fix the Kconfig header
Hardware monitoring chips don't have to be on the I2C bus.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:35 -07:00
Hans de Goede b7c066044f [PATCH] abituguru: Fix fan detection
One of my testers had a problem where the driver only saw 2 of the 4 fan
sensors his uGuru has, this fixes this.
 -accept 0x40 (bit 6) being high as a valid fan sensor setting for all fans
  not just fan 1, I have a feeling this bit indicates whether or not a fan is
  actually connected .

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:34 -07:00
Hans de Goede a2392e0b90 [PATCH] abituguru: Review fixes
Fixes to the Abit uGuru driver as requested in review by Jean Delvare:
 - exactly calculate the sysfs_names array length using macro
 - use snprintf when generating names to double check that the sysfs_names
   array does not overflow.
 - use ARRAY_SIZE and / or defines to determine number of loops in for loops
   instead of using hardcoded values.
 - In abituguru_probe(), refactor the error path leaving a single call to kfree

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:34 -07:00
Hans de Goede f2b84bbceb [PATCH] abituguru: New hardware monitoring driver
New hardware monitoring driver for the Abit uGuru

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:34 -07:00
Yuan Mu bed730821b [PATCH] w83792d: Add missing data access locks
Add missing data lock in w83792d driver to avoid unexpected
data change.

Signed-off-by: Yuan Mu <ymu@winbond.com.tw>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:34 -07:00
Yuan Mu 53e2761bb2 [PATCH] w83792d: Fix setting the PWM value
W83792D use pwm register low 4 bits to store PWM/DC value, bit 7
is used to store fan PWM/DC mode. The store_pwm function did not
convert the pwm input correctly, so it may change the fan mode
when new value is set.

This fix the problem. Change the "index" value of pwm*_mode
and pwm* SENSOR_ATTR to simplify code.

Signed-off-by: Yuan Mu <ymu@winbond.com.tw>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:34 -07:00
Jean Delvare 0a704681f3 [PATCH] hwmon: Fix a typo in the hdaps driver
Fix a typo in the hdaps driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Robert Love <rml@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:34 -07:00
Rudolf Marek 177d165d7c [PATCH] HWMON: Trim VID values to correct number of bits
Following patch trims the VID value to correct number of bits
for each VRM.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:33 -07:00
Jean Delvare 0d0001dd95 [PATCH] HWMON: Improve the help text for CONFIG_HWMON
Improve the help text for CONFIG_HWMON to let the users know how they
pick the right hardware monitoring driver(s) for their system.

Also fix a couple typos in the related documentation file and improve
some parts a bit.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:33 -07:00
Charles Spirakis 9873964d6e [PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791D
Add support for the w83791d sensor chip. The w83791d hardware is
somewhere between the w83781d and the w83792d and this driver code
is derived from the code that supports those chips.

Signed-off-by: Charles Spirakis <bezaur@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:33 -07:00
Jean Delvare 4f507ea156 [PATCH] HWMON: hdaps: Update the list of supported systems
Update the list of systems supported by the hdaps driver:
* Add the "ThinkPad Z60m" entry, reported by Arkadiusz Miskiewicz.
* Add the "ThinkPad H" entry, reported by Frank Gevaerts for some
  ThinkPad R52 models (1846AQG).
* Drop the "ThinkPad X41 Tablet" entry, which looks redundant to me.
And a comment update for good measure.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: Frank Gevaerts <frank@gevaerts.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:33 -07:00
Jean Delvare 568825c8ed [PATCH] f71805f: Resource needs not be global
The F71805F I/O resource structure needs not be a global variable,
as the platform core allocs its own copy of it anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:32 -07:00
Hartmut Rick 59ac83677f [PATCH] smsc47m192: New hwmon driver for SMSC LPC47M192/997
New driver (smsc47m192) which supports voltage and temperature
measurement features of SMSC LPC47M192 and LPC47M997 chips.

Signed-off-by: Hartmut Rick <linux@rick.claranet.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:32 -07:00
Jean Delvare a4589dbb4e [PATCH] w83627ehf: Add alarms support
Add alarms support for the W83627EHF/EHG hardware monitoring chip.

This is based on an earlier patch from Rudolf Marek.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:32 -07:00
Rudolf Marek cf0676fe42 [PATCH] w83627ehf: Add voltage inputs support
Add the voltage measuring support to W83627EHF. The code is based
on the patch provided by Yuan Mu from Winbond.

Signed-off-by: Yuan Mu <Ymu@winbond.com.tw>
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:31 -07:00
Jordan Crouse 43cb7ebee2 [PATCH] lm83: Add LM82 support
Add LM82 temperature sensor support (similar to the LM83,
but less featureful).

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22 11:10:31 -07:00
Jean Delvare ac987c1f65 [PATCH] w83792d: Be quiet on misdetection
Make the w83792d driver keep quiet when misdetecting a chip. This can
happen, and the user doesn't need to know.

Also renumber the messages, and add one, for consistency.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:18:33 -07:00
Andrew Morton b3f28a9a26 [PATCH] hdaps: use ENODEV
Use ENODEV when the hdaps hardware isn't there, not ENXIO.

Cc: Jean Delvare <khali@linux-fr.org>
Cc: Robert Love <rml@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:45 -07:00
Robert Love 0f6c840d77 [PATCH] hdaps: support new Lenovo machines
Add support for forthcoming Lenovo-branded machines to the HDAPS driver.

Signed-off-by: Robert Love <rml@novell.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:42 -07:00
Frank Gevaerts 653edba1a8 [PATCH] hdaps: add support for Thinkpad R52
This adds support for my Thinkpad R52, which for some reason is not matched
by the "ThinkPad R52" line.

Signed-off-by: Frank Gevaerts <frank@gevaerts.be>
Cc: Robert Love <rml@novell.com>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:39 -07:00
Arjan van de Ven 597a7679dd [PATCH] revert incorrect mutex conversion in hdaps driver
This reverts the mutex conversion that was recently done to the hdaps
driver; this coversion was buggy because the hdaps driver started using
this semaphore in IRQ context, which mutexes do not allow.  Easiest
solution for now is to just revert the patch (the patch was part of a
bigger GIT commit, 9a61bf6300 but this
only reverts this one file)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-02 13:02:05 -07:00
Alexey Dobriyan 53b3531bbb [PATCH] s/;;/;/g
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:24 -08:00
Mark M. Hoffman ded2b66615 [PATCH] hwmon: add required idr locking
Add required locking around idr_ routines, retry the idr_pre_get/idr_get_new
pair properly, and sprinkle in some likely/unlikely for good measure.

(Lack of idr locking didn't hurt when all callers were I2C clients, as the
i2c-core serialized for us anyway.  Now that we have non I2C hwmon drivers,
this is truly necessary.)

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:55 -08:00
Darren Jenkins f6c27fc17c [PATCH] I2C: hwmon: Rename register parameters
"register" is a reserved keyword so using it as a parameter name
can confuse some compilers, most notably ICC.

The patch below just renames all occurences to reg which fits the actual
function declarations.

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:55 -08:00
Jean Delvare fabddcd49d [PATCH] w83781d: Don't reset the chip by default
Stop resetting the chip on load by default, so as to preserve the BIOS
initializations. Same was done in the w83627hf driver some times ago
for the same reasons.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:53 -08:00
Yuan Mu 412fec8216 [PATCH] w83627ehf: Refactor the sysfs interface
Use dynamic sysfs callbacks and array of attributes to reduce the
w83627ehf driver size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:53 -08:00
Jean Delvare 4c537fb287 [PATCH] hwmon: Support the Pentium M VID code
Add support for the Intel Pentium M series to the hwmon-vid driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:52 -08:00
Jean Delvare c2db6ce14a [PATCH] hwmon: Add support for the Winbond W83687THF
Add support for the Winbond W83687THF chip to the w83627hf hardware
monitoring driver. This new chip is almost similar to the already
supported W83627THF chip, except for VID and a few other minor
changes.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:52 -08:00
Jean Delvare f08191849e [PATCH] hwmon: f71805f semaphore to mutex conversions
Convert the new f71805f hardware monitoring driver to use mutexes
instead of semaphores.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:52 -08:00
Ingo Molnar 9a61bf6300 [PATCH] hwmon: Semaphore to mutex conversions
convert drivers/hwmon/*.c semaphore use to mutexes.

the conversion was generated via scripts, and the result was validated
automatically via a script as well.

all affected hwmon drivers were build-tested.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:52 -08:00
Jean Delvare 93766d2de6 [PATCH] hwmon: w83792d drop useless macros
Drop 3 useless macros in the w83792d hardware monitoring driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:51 -08:00
Yuan Mu 1f8dae31fe [PATCH] hwmon: w83792d use arrays of attributes
Use arrays of attributes in the w83792d driver.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Yuan Mu <ymu@winbond.com.tw>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:51 -08:00
Jean Delvare 2488a39d23 [PATCH] hwmon: Use attribute arrays in f71805f
Convert the f71805f driver to use arrays of attributes. This shrinks the
compiled module from 12.0 kB to 9.6 kB. We certainly should do the same
for as many hardware monitoring drivers as possible.

This, together with a nice chip design by Fintek, makes this driver
very small, both in terms of number of lines of code and memory
consumption.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:49 -08:00
Jim Cromie dedc6a7803 [PATCH] hwmon: Use attribute arrays in pc87360
Convert individual sensors to sensor-attr arrays by each sensor type,
and initialize them in loops instead of long blocks of individual calls.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:48 -08:00
Jean Delvare be79c38325 [PATCH] it87: Fix oops on removal
Fix an oops on it87 module removal when no supported hardware was
found.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-13 22:30:10 -08:00
Jean Delvare c7f5d7edd8 [PATCH] w83781d: Use real-time status registers
Use the real-time status registers of the Winbond W83782D, W83783S and
W83627HF chips, instead of the interrupt status registers. Interrupts
cannot be trusted at least for voltage inputs, as they are two-times
triggers (as opposed to comparator mode, which we want.) The w83627hf
driver was fixed in a similar way some times ago.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-13 22:30:09 -08:00
Jean Delvare e3efa5a739 [PATCH] vt8231: Fix sysfs temperature interface
The VT8231 low temperature limits are actually hysteresis temperatures
to the high limits.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Roger Lucas <roger@planbit.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-13 22:30:09 -08:00
Jean Delvare c5e3fbf22c [PATCH] hwmon: Fix reboot on it87 driver load
Only scan I2C address 0x2d. This is the default address and no IT87xxF
chip was ever seen on I2C at a different address. These chips are
better accessed through their ISA interface anyway.

This fixes bug #5889, although it doesn't address the whole class
of problems. We'd need the ability to blacklist arbitrary I2C addresses
on systems known to contain I2C devices which behave badly when probed.

Plan the I2C interface for removal as well. If nobody complains within
a year, it will confirm my impression that the I2C interface isn't
actually needed by anyone.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-06 12:02:15 -08:00
Jean Delvare e53004e20a [PATCH] hwmon: New f71805f driver
This is my f71805f hardware monitoring driver ported from lm_sensors
to Linux 2.6. This new driver differs from the other hardware monitoring
drivers in that it is implemented as a platform driver. This might not
be optimal yet (we would probably need a generic infrastructure and bus
type for Super-I/O logical devices) but it is certainly much better than
the i2c-isa solution.

Note that this driver requires lm_sensors CVS. I hope to get it
released as 2.10.0 soon.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-06 12:02:15 -08:00
Jean Delvare 0d0ab7fe4c [PATCH] hwmon: Inline w83792d register access functions
Inline w83792d_{read,write}_value for better performance.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Yuan Mu <Ymu@winbond.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-06 12:02:15 -08:00
Jean Delvare 413b645150 [PATCH] hwmon: Fix negative temperature readings in lm77 driver
Fix negative temperature readings in lm77 driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Michael Renzmann <mrenzmann@otaku42.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-06 12:02:14 -08:00
Richard Knutsson 93b47684f6 [PATCH] drivers/*rest*: Replace pci_module_init() with pci_register_driver()
Replace obsolete pci_module_init() with pci_register_driver().

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-09 12:13:23 -08:00
Jean Delvare a7be58a126 [PATCH] hwmon: it87 use u8 for vrm
VRM values fit in u8 by design now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05 22:16:26 -08:00
Rudolf Marek 734a12a366 [PATCH] hwmon: add VRM/VID support for some VIA CPUs
This patch adds the VIA CENTAUR CPUs to detection table.
Table was updated to treat future Intel x86 CPUs as VRD10.
Stepping field was added, because some VIA CPUs have
different VRM specs across stepping. I changed the vrm type
to u8 because all drivers use u8 anyway.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-05 22:16:26 -08:00