Commit Graph

374 Commits

Author SHA1 Message Date
Hugh Dickins 267a4c76bb tmpfs: fix shmem_evict_inode() warnings on i_blocks
Dmitry Vyukov provides a little program, autogenerated by syzkaller,
which races a fault on a mapping of a sparse memfd object, against
truncation of that object below the fault address: run repeatedly for a
few minutes, it reliably generates shmem_evict_inode()'s
WARN_ON(inode->i_blocks).

(But there's nothing specific to memfd here, nor to the fstat which it
happened to use to generate the fault: though that looked suspicious,
since a shmem_recalc_inode() had been added there recently.  The same
problem can be reproduced with open+unlink in place of memfd_create, and
with fstatfs in place of fstat.)

v3.7 commit 0f3c42f522 ("tmpfs: change final i_blocks BUG to WARNING")
explains one cause of such a warning (a race with shmem_writepage to
swap), and possible solutions; but we never took it further, and this
syzkaller incident turns out to have a different cause.

shmem_getpage_gfp()'s error recovery, when a freshly allocated page is
then found to be beyond eof, looks plausible - decrementing the alloced
count that was just before incremented - but in fact can go wrong, if a
racing thread (the truncator, for example) gets its shmem_recalc_inode()
in just after our delete_from_page_cache().  delete_from_page_cache()
decrements nrpages, that shmem_recalc_inode() will balance the books by
decrementing alloced itself, then our decrement of alloced take it one
too low: leading to the WARNING when the object is finally evicted.

Once the new page has been exposed in the page cache,
shmem_getpage_gfp() must leave it to shmem_recalc_inode() itself to get
the accounting right in all cases (and not fall through from "trunc:" to
"decused:").  Adjust that error recovery block; and the reinitialization
of info and sbinfo can be removed too.

While we're here, fix shmem_writepage() to avoid the original issue: it
will be safe against a racing shmem_recalc_inode(), if it merely
increments swapped before the shmem_delete_from_page_cache() which
decrements nrpages (but it must then do its own shmem_recalc_inode()
before that, while still in balance, instead of after).  (Aside: why do
we shmem_recalc_inode() here in the swap path? Because its raison d'etre
is to cope with clean sparse shmem pages being reclaimed behind our
back: so here when swapping is a good place to look for that case.) But
I've not now managed to reproduce this bug, even without the patch.

I don't see why I didn't do that earlier: perhaps inhibited by the
preference to eliminate shmem_recalc_inode() altogether.  Driven by this
incident, I do now have a patch to do so at last; but still want to sit
on it for a bit, there's a couple of questions yet to be resolved.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-12 10:15:34 -08:00
Mel Gorman dd56b04642 mm: page_alloc: hide some GFP internals and document the bits and flag combinations
Andrew stated the following

	We have quite a history of remote parts of the kernel using
	weird/wrong/inexplicable combinations of __GFP_ flags.	I tend
	to think that this is because we didn't adequately explain the
	interface.

	And I don't think that gfp.h really improved much in this area as
	a result of this patchset.  Could you go through it some time and
	decide if we've adequately documented all this stuff?

This patches first moves some GFP flag combinations that are part of the MM
internals to mm/internal.h. The rest of the patch documents the __GFP_FOO
bits under various headings and then documents the flag combinations. It
will not help callers that are brain damaged but the clarity might motivate
some fixes and avoid future mistakes.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Hugh Dickins d0424c429f tmpfs: avoid a little creat and stat slowdown
LKP reports that v4.2 commit afa2db2fb6 ("tmpfs: truncate prealloc
blocks past i_size") causes a 14.5% slowdown in the AIM9 creat-clo
benchmark.

creat-clo does just what you'd expect from the name, and creat's O_TRUNC
on 0-length file does indeed get into more overhead now shmem_setattr()
tests "0 <= 0" instead of "0 < 0".

I'm not sure how much we care, but I think it would not be too VW-like to
add in a check for whether any pages (or swap) are allocated: if none are
allocated, there's none to remove from the radix_tree.  At first I thought
that check would be good enough for the unmaps too, but no: we should not
skip the unlikely case of unmapping pages beyond the new EOF, which were
COWed from holes which have now been reclaimed, leaving none.

This gives me an 8.5% speedup: on Haswell instead of LKP's Westmere, and
running a debug config before and after: I hope those account for the
lesser speedup.

And probably someone has a benchmark where a thousand threads keep on
stat'ing the same file repeatedly: forestall that report by adjusting v4.3
commit 44a30220bc ("shmem: recalculate file inode when fstat") not to
take the spinlock in shmem_getattr() when there's no work to do.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Ying Huang <ying.huang@linux.intel.com>
Tested-by: Ying Huang <ying.huang@linux.intel.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Hugh Dickins 45637bab30 mm: rename mem_cgroup_migrate to mem_cgroup_replace_page
After v4.3's commit 0610c25daa ("memcg: fix dirty page migration")
mem_cgroup_migrate() doesn't have much to offer in page migration: convert
migrate_misplaced_transhuge_page() to set_page_memcg() instead.

Then rename mem_cgroup_migrate() to mem_cgroup_replace_page(), since its
remaining callers are replace_page_cache_page() and shmem_replace_page():
both of whom passed lrucare true, so just eliminate that argument.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Yu Zhao 44a30220bc shmem: recalculate file inode when fstat
Shmem uses shmem_recalc_inode to update i_blocks when it allocates page,
undoes range or swaps.  But mm can drop clean page without notifying
shmem.  This makes fstat sometimes return out-of-date block size.

The problem can be partially solved when we add
inode_operations->getattr which calls shmem_recalc_inode to update
i_blocks for fstat.

shmem_recalc_inode also updates counter used by statfs and
vm_committed_as.  For them the situation is not changed.  They still
suffer from the discrepancy after dropping clean page and before the
function is called by aforementioned triggers.

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 15:35:28 -07:00
Stephen Smalley e1832f2923 ipc: use private shmem or hugetlbfs inodes for shm segments.
The shm implementation internally uses shmem or hugetlbfs inodes for shm
segments.  As these inodes are never directly exposed to userspace and
only accessed through the shm operations which are already hooked by
security modules, mark the inodes with the S_PRIVATE flag so that inode
security initialization and permission checking is skipped.

This was motivated by the following lockdep warning:

  ======================================================
   [ INFO: possible circular locking dependency detected ]
   4.2.0-0.rc3.git0.1.fc24.x86_64+debug #1 Tainted: G        W
  -------------------------------------------------------
   httpd/1597 is trying to acquire lock:
   (&ids->rwsem){+++++.}, at: shm_close+0x34/0x130
   but task is already holding lock:
   (&mm->mmap_sem){++++++}, at: SyS_shmdt+0x4b/0x180
   which lock already depends on the new lock.
   the existing dependency chain (in reverse order) is:
   -> #3 (&mm->mmap_sem){++++++}:
        lock_acquire+0xc7/0x270
        __might_fault+0x7a/0xa0
        filldir+0x9e/0x130
        xfs_dir2_block_getdents.isra.12+0x198/0x1c0 [xfs]
        xfs_readdir+0x1b4/0x330 [xfs]
        xfs_file_readdir+0x2b/0x30 [xfs]
        iterate_dir+0x97/0x130
        SyS_getdents+0x91/0x120
        entry_SYSCALL_64_fastpath+0x12/0x76
   -> #2 (&xfs_dir_ilock_class){++++.+}:
        lock_acquire+0xc7/0x270
        down_read_nested+0x57/0xa0
        xfs_ilock+0x167/0x350 [xfs]
        xfs_ilock_attr_map_shared+0x38/0x50 [xfs]
        xfs_attr_get+0xbd/0x190 [xfs]
        xfs_xattr_get+0x3d/0x70 [xfs]
        generic_getxattr+0x4f/0x70
        inode_doinit_with_dentry+0x162/0x670
        sb_finish_set_opts+0xd9/0x230
        selinux_set_mnt_opts+0x35c/0x660
        superblock_doinit+0x77/0xf0
        delayed_superblock_init+0x10/0x20
        iterate_supers+0xb3/0x110
        selinux_complete_init+0x2f/0x40
        security_load_policy+0x103/0x600
        sel_write_load+0xc1/0x750
        __vfs_write+0x37/0x100
        vfs_write+0xa9/0x1a0
        SyS_write+0x58/0xd0
        entry_SYSCALL_64_fastpath+0x12/0x76
  ...

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Reported-by: Morten Stevens <mstevens@fedoraproject.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-07 04:39:41 +03:00
Josef Bacik afa2db2fb6 tmpfs: truncate prealloc blocks past i_size
One of the rocksdb people noticed that when you do something like this

    fallocate(fd, FALLOC_FL_KEEP_SIZE, 0, 10M)
    pwrite(fd, buf, 5M, 0)
    ftruncate(5M)

on tmpfs, the file would still take up 10M: which led to super fun
issues because we were getting ENOSPC before we thought we should be
getting ENOSPC.  This patch fixes the problem, and mirrors what all the
other fs'es do (and was agreed to be the correct behaviour at LSF).

I tested it locally to make sure it worked properly with the following

    xfs_io -f -c "falloc -k 0 10M" -c "pwrite 0 5M" -c "truncate 5M" file

Without the patch we have "Blocks: 20480", with the patch we have the
correct value of "Blocks: 10240".

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 17:49:45 -07:00
Linus Torvalds 052b398a43 Merge branch 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "In this pile: pathname resolution rewrite.

   - recursion in link_path_walk() is gone.

   - nesting limits on symlinks are gone (the only limit remaining is
     that the total amount of symlinks is no more than 40, no matter how
     nested).

   - "fast" (inline) symlinks are handled without leaving rcuwalk mode.

   - stack footprint (independent of the nesting) is below kilobyte now,
     about on par with what it used to be with one level of nested
     symlinks and ~2.8 times lower than it used to be in the worst case.

   - struct nameidata is entirely private to fs/namei.c now (not even
     opaque pointers are being passed around).

   - ->follow_link() and ->put_link() calling conventions had been
     changed; all in-tree filesystems converted, out-of-tree should be
     able to follow reasonably easily.

     For out-of-tree conversions, see Documentation/filesystems/porting
     for details (and in-tree filesystems for examples of conversion).

  That has sat in -next since mid-May, seems to survive all testing
  without regressions and merges clean with v4.1"

* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (131 commits)
  turn user_{path_at,path,lpath,path_dir}() into static inlines
  namei: move saved_nd pointer into struct nameidata
  inline user_path_create()
  inline user_path_parent()
  namei: trim do_last() arguments
  namei: stash dfd and name into nameidata
  namei: fold path_cleanup() into terminate_walk()
  namei: saner calling conventions for filename_parentat()
  namei: saner calling conventions for filename_create()
  namei: shift nameidata down into filename_parentat()
  namei: make filename_lookup() reject ERR_PTR() passed as name
  namei: shift nameidata inside filename_lookup()
  namei: move putname() call into filename_lookup()
  namei: pass the struct path to store the result down into path_lookupat()
  namei: uninline set_root{,_rcu}()
  namei: be careful with mountpoint crossings in follow_dotdot_rcu()
  Documentation: remove outdated information from automount-support.txt
  get rid of assorted nameidata-related debris
  lustre: kill unused helper
  lustre: kill unused macro (LOOKUP_CONTINUE)
  ...
2015-06-22 12:51:21 -07:00
Hugh Dickins 66fc130394 mm: shmem_zero_setup skip security check and lockdep conflict with XFS
It appears that, at some point last year, XFS made directory handling
changes which bring it into lockdep conflict with shmem_zero_setup():
it is surprising that mmap() can clone an inode while holding mmap_sem,
but that has been so for many years.

Since those few lockdep traces that I've seen all implicated selinux,
I'm hoping that we can use the __shmem_file_setup(,,,S_PRIVATE) which
v3.13's commit c727709092 ("security: shmem: implement kernel private
shmem inodes") introduced to avoid LSM checks on kernel-internal inodes:
the mmap("/dev/zero") cloned inode is indeed a kernel-internal detail.

This also covers the !CONFIG_SHMEM use of ramfs to support /dev/zero
(and MAP_SHARED|MAP_ANONYMOUS).  I thought there were also drivers
which cloned inode in mmap(), but if so, I cannot locate them now.

Reported-and-tested-by: Prarit Bhargava <prarit@redhat.com>
Reported-and-tested-by: Daniel Wagner <wagi@monom.org>
Reported-and-tested-by: Morten Stevens <mstevens@fedoraproject.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-17 20:40:19 -10:00
Al Viro 5f2c4179e1 switch ->put_link() from dentry to inode
only one instance looks at that argument at all; that sole
exception wants inode rather than dentry.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-11 08:13:12 -04:00
Al Viro 6e77137b36 don't pass nameidata to ->follow_link()
its only use is getting passed to nd_jump_link(), which can obtain
it from current->nameidata

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:20:15 -04:00
Al Viro 680baacbca new ->follow_link() and ->put_link() calling conventions
a) instead of storing the symlink body (via nd_set_link()) and returning
an opaque pointer later passed to ->put_link(), ->follow_link() _stores_
that opaque pointer (into void * passed by address by caller) and returns
the symlink body.  Returning ERR_PTR() on error, NULL on jump (procfs magic
symlinks) and pointer to symlink body for normal symlinks.  Stored pointer
is ignored in all cases except the last one.

Storing NULL for opaque pointer (or not storing it at all) means no call
of ->put_link().

b) the body used to be passed to ->put_link() implicitly (via nameidata).
Now only the opaque pointer is.  In the cases when we used the symlink body
to free stuff, ->follow_link() now should store it as opaque pointer in addition
to returning it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:19:45 -04:00
Al Viro 60380f193e shmem: switch to simple_follow_link()
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:18:24 -04:00
David Howells 75c3cfa855 VFS: assorted weird filesystems: d_inode() annotations
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:58 -04:00
Al Viro 5d5d568975 make new_sync_{read,write}() static
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:40 -04:00
Al Viro c0fec3a98b Merge branch 'iocb' into for-next 2015-04-11 22:24:41 -04:00
Christoph Hellwig e2e40f2c1e fs: move struct kiocb to fs.h
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25 20:28:11 -04:00
Sasha Levin f0774d884b mm: shmem: check for mapping owner before dereferencing
mapping->host can be NULL and shouldn't be dereferenced before being checked.

[ 1295.741844] GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP KASAN
[ 1295.746387] Dumping ftrace buffer:
[ 1295.748217]    (ftrace buffer empty)
[ 1295.749527] Modules linked in:
[ 1295.750268] CPU: 62 PID: 23410 Comm: trinity-c70 Not tainted 3.19.0-next-20150219-sasha-00045-g9130270f #1939
[ 1295.750268] task: ffff8803a49db000 ti: ffff8803a4dc8000 task.ti: ffff8803a4dc8000
[ 1295.750268] RIP: shmem_mapping (mm/shmem.c:1458)
[ 1295.750268] RSP: 0000:ffff8803a4dcfbf8  EFLAGS: 00010206
[ 1295.750268] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 00000000000f2804
[ 1295.750268] RDX: 0000000000000005 RSI: 0400000000000794 RDI: 0000000000000028
[ 1295.750268] RBP: ffff8803a4dcfc08 R08: 0000000000000000 R09: 00000000031de000
[ 1295.750268] R10: dffffc0000000000 R11: 00000000031c1000 R12: 0400000000000794
[ 1295.750268] R13: 00000000031c2000 R14: 00000000031de000 R15: ffff880e3bdc1000
[ 1295.750268] FS:  00007f8703c7e700(0000) GS:ffff881164800000(0000) knlGS:0000000000000000
[ 1295.750268] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1295.750268] CR2: 0000000004e58000 CR3: 00000003a9f3c000 CR4: 00000000000007a0
[ 1295.750268] DR0: ffffffff81000000 DR1: 0000009494949494 DR2: 0000000000000000
[ 1295.750268] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000d0602
[ 1295.750268] Stack:
[ 1295.750268]  ffff8803a4dcfec8 ffffffffbb1dc770 ffff8803a4dcfc38 ffffffffad6f230b
[ 1295.750268]  ffffffffad6f2b0d 0000014100000000 ffff88001e17c08b ffff880d9453fe08
[ 1295.750268]  ffff8803a4dcfd18 ffffffffad6f2ce2 ffff8803a49dbcd8 ffff8803a49dbce0
[ 1295.750268] Call Trace:
[ 1295.750268] mincore_page (mm/mincore.c:61)
[ 1295.750268] ? mincore_pte_range (include/linux/spinlock.h:312 mm/mincore.c:131)
[ 1295.750268] mincore_pte_range (mm/mincore.c:151)
[ 1295.750268] ? mincore_unmapped_range (mm/mincore.c:113)
[ 1295.750268] __walk_page_range (mm/pagewalk.c:51 mm/pagewalk.c:90 mm/pagewalk.c:116 mm/pagewalk.c:204)
[ 1295.750268] walk_page_range (mm/pagewalk.c:275)
[ 1295.750268] SyS_mincore (mm/mincore.c:191 mm/mincore.c:253 mm/mincore.c:220)
[ 1295.750268] ? mincore_pte_range (mm/mincore.c:220)
[ 1295.750268] ? mincore_unmapped_range (mm/mincore.c:113)
[ 1295.750268] ? __mincore_unmapped_range (mm/mincore.c:105)
[ 1295.750268] ? ptlock_free (mm/mincore.c:24)
[ 1295.750268] ? syscall_trace_enter (arch/x86/kernel/ptrace.c:1610)
[ 1295.750268] ia32_do_call (arch/x86/ia32/ia32entry.S:446)
[ 1295.750268] Code: e5 48 c1 ea 03 53 48 89 fb 48 83 ec 08 80 3c 02 00 75 4f 48 b8 00 00 00 00 00 fc ff df 48 8b 1b 48 8d 7b 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 3f 48 b8 00 00 00 00 00 fc ff df 48 8b 5b 28 48

All code
========
   0:	e5 48                	in     $0x48,%eax
   2:	c1 ea 03             	shr    $0x3,%edx
   5:	53                   	push   %rbx
   6:	48 89 fb             	mov    %rdi,%rbx
   9:	48 83 ec 08          	sub    $0x8,%rsp
   d:	80 3c 02 00          	cmpb   $0x0,(%rdx,%rax,1)
  11:	75 4f                	jne    0x62
  13:	48 b8 00 00 00 00 00 	movabs $0xdffffc0000000000,%rax
  1a:	fc ff df
  1d:	48 8b 1b             	mov    (%rbx),%rbx
  20:	48 8d 7b 28          	lea    0x28(%rbx),%rdi
  24:	48 89 fa             	mov    %rdi,%rdx
  27:	48 c1 ea 03          	shr    $0x3,%rdx
  2b:*	80 3c 02 00          	cmpb   $0x0,(%rdx,%rax,1)		<-- trapping instruction
  2f:	75 3f                	jne    0x70
  31:	48 b8 00 00 00 00 00 	movabs $0xdffffc0000000000,%rax
  38:	fc ff df
  3b:	48 8b 5b 28          	mov    0x28(%rbx),%rbx
  3f:	48                   	rex.W
	...

Code starting with the faulting instruction
===========================================
   0:	80 3c 02 00          	cmpb   $0x0,(%rdx,%rax,1)
   4:	75 3f                	jne    0x45
   6:	48 b8 00 00 00 00 00 	movabs $0xdffffc0000000000,%rax
   d:	fc ff df
  10:	48 8b 5b 28          	mov    0x28(%rbx),%rbx
  14:	48                   	rex.W
	...
[ 1295.750268] RIP shmem_mapping (mm/shmem.c:1458)
[ 1295.750268]  RSP <ffff8803a4dcfbf8>

Fixes: 97b713ba3e ("fs: kill BDI_CAP_SWAP_BACKED")
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-23 10:00:11 -08:00
David Howells e36cb0b89c VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
Convert the following where appropriate:

 (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).

 (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).

 (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry).  This is actually more
     complicated than it appears as some calls should be converted to
     d_can_lookup() instead.  The difference is whether the directory in
     question is a real dir with a ->lookup op or whether it's a fake dir with
     a ->d_automount op.

In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).

Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer.  In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.

However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.

There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE.  Strictly, this was
intended for special directory entry types that don't have attached inodes.

The following perl+coccinelle script was used:

use strict;

my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
    die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
    print "No matches\n";
    exit(0);
}

my @cocci = (
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISLNK(E->d_inode->i_mode)',
    '+ d_is_symlink(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISDIR(E->d_inode->i_mode)',
    '+ d_is_dir(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISREG(E->d_inode->i_mode)',
    '+ d_is_reg(E)' );

my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);

foreach my $file (@callers) {
    chomp $file;
    print "Processing ", $file, "\n";
    system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
	die "spatch failed";
}

[AV: overlayfs parts skipped]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-22 11:38:41 -05:00
Linus Torvalds 6bec003528 Merge branch 'for-3.20/bdi' of git://git.kernel.dk/linux-block
Pull backing device changes from Jens Axboe:
 "This contains a cleanup of how the backing device is handled, in
  preparation for a rework of the life time rules.  In this part, the
  most important change is to split the unrelated nommu mmap flags from
  it, but also removing a backing_dev_info pointer from the
  address_space (and inode), and a cleanup of other various minor bits.

  Christoph did all the work here, I just fixed an oops with pages that
  have a swap backing.  Arnd fixed a missing export, and Oleg killed the
  lustre backing_dev_info from staging.  Last patch was from Al,
  unexporting parts that are now no longer needed outside"

* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
  Make super_blocks and sb_lock static
  mtd: export new mtd_mmap_capabilities
  fs: make inode_to_bdi() handle NULL inode
  staging/lustre/llite: get rid of backing_dev_info
  fs: remove default_backing_dev_info
  fs: don't reassign dirty inodes to default_backing_dev_info
  nfs: don't call bdi_unregister
  ceph: remove call to bdi_unregister
  fs: remove mapping->backing_dev_info
  fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
  nilfs2: set up s_bdi like the generic mount_bdev code
  block_dev: get bdev inode bdi directly from the block device
  block_dev: only write bdev inode on close
  fs: introduce f_op->mmap_capabilities for nommu mmap support
  fs: kill BDI_CAP_SWAP_BACKED
  fs: deduplicate noop_backing_dev_info
2015-02-12 13:50:21 -08:00
Vladimir Davydov 93aa7d9524 swap: remove unused mem_cgroup_uncharge_swapcache declaration
The body of this function was removed by commit 0a31bc97c8 ("mm:
memcontrol: rewrite uncharge API").

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:00 -08:00
Kirill A. Shutemov d83a08db5b mm: drop vm_ops->remap_pages and generic_file_remap_pages() stub
Nobody uses it anymore.

[akpm@linux-foundation.org: fix filemap_xip.c]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10 14:30:30 -08:00
Michal Hocko f5e03a4989 memcg, shmem: fix shmem migration to use lrucare
It has been reported that 965GM might trigger

  VM_BUG_ON_PAGE(!lrucare && PageLRU(oldpage), oldpage)

in mem_cgroup_migrate when shmem wants to replace a swap cache page
because of shmem_should_replace_page (the page is allocated from an
inappropriate zone).  shmem_replace_page expects that the oldpage is not
on LRU list and calls mem_cgroup_migrate without lrucare.  This is
obviously incorrect because swapcache pages might be on the LRU list
(e.g. swapin readahead page).

Fix this by enabling lrucare for the migration in shmem_replace_page.
Also clarify that lrucare should be used even if one of the pages might
be on LRU list.

The BUG_ON will trigger only when CONFIG_DEBUG_VM is enabled but even
without that the migration code might leave the old page on an
inappropriate memcg' LRU which is not that critical because the page
would get removed with its last reference but it is still confusing.

Fixes: 0a31bc97c8 ("mm: memcontrol: rewrite uncharge API")
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Dave Airlie <airlied@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>	[3.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-05 13:35:29 -08:00
Christoph Hellwig b83ae6d421 fs: remove mapping->backing_dev_info
Now that we never use the backing_dev_info pointer in struct address_space
we can simply remove it and save 4 to 8 bytes in every inode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20 14:03:05 -07:00
Christoph Hellwig 97b713ba3e fs: kill BDI_CAP_SWAP_BACKED
This bdi flag isn't too useful - we can determine that a vma is backed by
either swap or shmem trivially in the caller.

This also allows removing the backing_dev_info instaces for swap and shmem
in favor of noop_backing_dev_info.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20 14:02:56 -07:00
Al Viro 777eda2c5b new helper: iter_is_iovec()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-17 06:43:56 -05:00
Miklos Szeredi 46fdb794e3 shmem: support RENAME_WHITEOUT
Allocate a dentry, initialize it with a whiteout and hash it in the place
of the old dentry.  Later the old dentry will be moved away and the
whiteout will remain.

i_mutex protects agains concurrent readdir.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
2014-10-24 00:14:37 +02:00
Linus Torvalds c798360cd1 Merge branch 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
 "A lot of activities on percpu front.  Notable changes are...

   - percpu allocator now can take @gfp.  If @gfp doesn't contain
     GFP_KERNEL, it tries to allocate from what's already available to
     the allocator and a work item tries to keep the reserve around
     certain level so that these atomic allocations usually succeed.

     This will replace the ad-hoc percpu memory pool used by
     blk-throttle and also be used by the planned blkcg support for
     writeback IOs.

     Please note that I noticed a bug in how @gfp is interpreted while
     preparing this pull request and applied the fix 6ae833c7fe
     ("percpu: fix how @gfp is interpreted by the percpu allocator")
     just now.

   - percpu_ref now uses longs for percpu and global counters instead of
     ints.  It leads to more sparse packing of the percpu counters on
     64bit machines but the overhead should be negligible and this
     allows using percpu_ref for refcnting pages and in-memory objects
     directly.

   - The switching between percpu and single counter modes of a
     percpu_ref is made independent of putting the base ref and a
     percpu_ref can now optionally be initialized in single or killed
     mode.  This allows avoiding percpu shutdown latency for cases where
     the refcounted objects may be synchronously created and destroyed
     in rapid succession with only a fraction of them reaching fully
     operational status (SCSI probing does this when combined with
     blk-mq support).  It's also planned to be used to implement forced
     single mode to detect underflow more timely for debugging.

  There's a separate branch percpu/for-3.18-consistent-ops which cleans
  up the duplicate percpu accessors.  That branch causes a number of
  conflicts with s390 and other trees.  I'll send a separate pull
  request w/ resolutions once other branches are merged"

* 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (33 commits)
  percpu: fix how @gfp is interpreted by the percpu allocator
  blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode
  percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky
  percpu_ref: add PERCPU_REF_INIT_* flags
  percpu_ref: decouple switching to percpu mode and reinit
  percpu_ref: decouple switching to atomic mode and killing
  percpu_ref: add PCPU_REF_DEAD
  percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch
  percpu_ref: replace pcpu_ prefix with percpu_
  percpu_ref: minor code and comment updates
  percpu_ref: relocate percpu_ref_reinit()
  Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe"
  Revert "percpu: free percpu allocation info for uniprocessor system"
  percpu-refcount: make percpu_ref based on longs instead of ints
  percpu-refcount: improve WARN messages
  percpu: fix locking regression in the failure path of pcpu_alloc()
  percpu-refcount: add @gfp to percpu_ref_init()
  proportions: add @gfp to init functions
  percpu_counter: add @gfp to percpu_counter_init()
  percpu_counter: make percpu_counters_lock irq-safe
  ...
2014-10-10 07:26:02 -04:00
Andrew Morton 1c93923cc2 include/linux/migrate.h: remove migrate_page #define
This is designed to avoid a few ifdefs in .c files but it's obnoxious
because it can cause unsuspecting "migrate_page" symbols to get turned into
"NULL".

Just nuke it and use the ifdefs.

Cc: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 22:25:56 -04:00
Miklos Szeredi b928095b0a shmem: fix nlink for rename overwrite directory
If overwriting an empty directory with rename, then need to drop the extra
nlink.

Test prog:

#include <stdio.h>
#include <fcntl.h>
#include <err.h>
#include <sys/stat.h>

int main(void)
{
	const char *test_dir1 = "test-dir1";
	const char *test_dir2 = "test-dir2";
	int res;
	int fd;
	struct stat statbuf;

	res = mkdir(test_dir1, 0777);
	if (res == -1)
		err(1, "mkdir(\"%s\")", test_dir1);

	res = mkdir(test_dir2, 0777);
	if (res == -1)
		err(1, "mkdir(\"%s\")", test_dir2);

	fd = open(test_dir2, O_RDONLY);
	if (fd == -1)
		err(1, "open(\"%s\")", test_dir2);

	res = rename(test_dir1, test_dir2);
	if (res == -1)
		err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2);

	res = fstat(fd, &statbuf);
	if (res == -1)
		err(1, "fstat(%i)", fd);

	if (statbuf.st_nlink != 0) {
		fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink);
		return 1;
	}

	return 0;
}

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-26 21:16:42 -04:00
Tejun Heo 908c7f1949 percpu_counter: add @gfp to percpu_counter_init()
Percpu allocator now supports allocation mask.  Add @gfp to
percpu_counter_init() so that !GFP_KERNEL allocation masks can be used
with percpu_counters too.

We could have left percpu_counter_init() alone and added
percpu_counter_init_gfp(); however, the number of users isn't that
high and introducing _gfp variants to all percpu data structures would
be quite ugly, so let's just do the conversion.  This is the one with
the most users.  Other percpu data structures are a lot easier to
convert.

This patch doesn't make any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
2014-09-08 09:51:29 +09:00
Linus Torvalds f6f993328b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "Stuff in here:

   - acct.c fixes and general rework of mnt_pin mechanism.  That allows
     to go for delayed-mntput stuff, which will permit mntput() on deep
     stack without worrying about stack overflows - fs shutdown will
     happen on shallow stack.  IOW, we can do Eric's umount-on-rmdir
     series without introducing tons of stack overflows on new mntput()
     call chains it introduces.
   - Bruce's d_splice_alias() patches
   - more Miklos' rename() stuff.
   - a couple of regression fixes (stable fodder, in the end of branch)
     and a fix for API idiocy in iov_iter.c.

  There definitely will be another pile, maybe even two.  I'd like to
  get Eric's series in this time, but even if we miss it, it'll go right
  in the beginning of for-next in the next cycle - the tricky part of
  prereqs is in this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
  fix copy_tree() regression
  __generic_file_write_iter(): fix handling of sync error after DIO
  switch iov_iter_get_pages() to passing maximal number of pages
  fs: mark __d_obtain_alias static
  dcache: d_splice_alias should detect loops
  exportfs: update Exporting documentation
  dcache: d_find_alias needn't recheck IS_ROOT && DCACHE_DISCONNECTED
  dcache: remove unused d_find_alias parameter
  dcache: d_obtain_alias callers don't all want DISCONNECTED
  dcache: d_splice_alias should ignore DCACHE_DISCONNECTED
  dcache: d_splice_alias mustn't create directory aliases
  dcache: close d_move race in d_splice_alias
  dcache: move d_splice_alias
  namei: trivial fix to vfs_rename_dir comment
  VFS: allow ->d_manage() to declare -EISDIR in rcu_walk mode.
  cifs: support RENAME_NOREPLACE
  hostfs: support rename flags
  shmem: support RENAME_EXCHANGE
  shmem: support RENAME_NOREPLACE
  btrfs: add RENAME_NOREPLACE
  ...
2014-08-11 11:44:11 -07:00
David Herrmann 05f65b5c70 shm: wait for pins to be released when sealing
If we set SEAL_WRITE on a file, we must make sure there cannot be any
ongoing write-operations on the file.  For write() calls, we simply lock
the inode mutex, for mmap() we simply verify there're no writable
mappings.  However, there might be pages pinned by AIO, Direct-IO and
similar operations via GUP.  We must make sure those do not write to the
memfd file after we set SEAL_WRITE.

As there is no way to notify GUP users to drop pages or to wait for them
to be done, we implement the wait ourself: When setting SEAL_WRITE, we
check all pages for their ref-count.  If it's bigger than 1, we know
there's some user of the page.  We then mark the page and wait for up to
150ms for those ref-counts to be dropped.  If the ref-counts are not
dropped in time, we refuse the seal operation.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:31 -07:00
David Herrmann 9183df25fe shm: add memfd_create() syscall
memfd_create() is similar to mmap(MAP_ANON), but returns a file-descriptor
that you can pass to mmap().  It can support sealing and avoids any
connection to user-visible mount-points.  Thus, it's not subject to quotas
on mounted file-systems, but can be used like malloc()'ed memory, but with
a file-descriptor to it.

memfd_create() returns the raw shmem file, so calls like ftruncate() can
be used to modify the underlying inode.  Also calls like fstat() will
return proper information and mark the file as regular file.  If you want
sealing, you can specify MFD_ALLOW_SEALING.  Otherwise, sealing is not
supported (like on all other regular files).

Compared to O_TMPFILE, it does not require a tmpfs mount-point and is not
subject to a filesystem size limit.  It is still properly accounted to
memcg limits, though, and to the same overcommit or no-overcommit
accounting as all user memory.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:31 -07:00
David Herrmann 40e041a2c8 shm: add sealing API
If two processes share a common memory region, they usually want some
guarantees to allow safe access. This often includes:
  - one side cannot overwrite data while the other reads it
  - one side cannot shrink the buffer while the other accesses it
  - one side cannot grow the buffer beyond previously set boundaries

If there is a trust-relationship between both parties, there is no need
for policy enforcement.  However, if there's no trust relationship (eg.,
for general-purpose IPC) sharing memory-regions is highly fragile and
often not possible without local copies.  Look at the following two
use-cases:

  1) A graphics client wants to share its rendering-buffer with a
     graphics-server. The memory-region is allocated by the client for
     read/write access and a second FD is passed to the server. While
     scanning out from the memory region, the server has no guarantee that
     the client doesn't shrink the buffer at any time, requiring rather
     cumbersome SIGBUS handling.
  2) A process wants to perform an RPC on another process. To avoid huge
     bandwidth consumption, zero-copy is preferred. After a message is
     assembled in-memory and a FD is passed to the remote side, both sides
     want to be sure that neither modifies this shared copy, anymore. The
     source may have put sensible data into the message without a separate
     copy and the target may want to parse the message inline, to avoid a
     local copy.

While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide
ways to achieve most of this, the first one is unproportionally ugly to
use in libraries and the latter two are broken/racy or even disabled due
to denial of service attacks.

This patch introduces the concept of SEALING.  If you seal a file, a
specific set of operations is blocked on that file forever.  Unlike locks,
seals can only be set, never removed.  Hence, once you verified a specific
set of seals is set, you're guaranteed that no-one can perform the blocked
operations on this file, anymore.

An initial set of SEALS is introduced by this patch:
  - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced
            in size. This affects ftruncate() and open(O_TRUNC).
  - GROW: If SEAL_GROW is set, the file in question cannot be increased
          in size. This affects ftruncate(), fallocate() and write().
  - WRITE: If SEAL_WRITE is set, no write operations (besides resizing)
           are possible. This affects fallocate(PUNCH_HOLE), mmap() and
           write().
  - SEAL: If SEAL_SEAL is set, no further seals can be added to a file.
          This basically prevents the F_ADD_SEAL operation on a file and
          can be set to prevent others from adding further seals that you
          don't want.

The described use-cases can easily use these seals to provide safe use
without any trust-relationship:

  1) The graphics server can verify that a passed file-descriptor has
     SEAL_SHRINK set. This allows safe scanout, while the client is
     allowed to increase buffer size for window-resizing on-the-fly.
     Concurrent writes are explicitly allowed.
  2) For general-purpose IPC, both processes can verify that SEAL_SHRINK,
     SEAL_GROW and SEAL_WRITE are set. This guarantees that neither
     process can modify the data while the other side parses it.
     Furthermore, it guarantees that even with writable FDs passed to the
     peer, it cannot increase the size to hit memory-limits of the source
     process (in case the file-storage is accounted to the source).

The new API is an extension to fcntl(), adding two new commands:
  F_GET_SEALS: Return a bitset describing the seals on the file. This
               can be called on any FD if the underlying file supports
               sealing.
  F_ADD_SEALS: Change the seals of a given file. This requires WRITE
               access to the file and F_SEAL_SEAL may not already be set.
               Furthermore, the underlying file must support sealing and
               there may not be any existing shared mapping of that file.
               Otherwise, EBADF/EPERM is returned.
               The given seals are _added_ to the existing set of seals
               on the file. You cannot remove seals again.

The fcntl() handler is currently specific to shmem and disabled on all
files. A file needs to explicitly support sealing for this interface to
work. A separate syscall is added in a follow-up, which creates files that
support sealing. There is no intention to support this on other
file-systems. Semantics are unclear for non-volatile files and we lack any
use-case right now. Therefore, the implementation is specific to shmem.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:31 -07:00
Johannes Weiner 0a31bc97c8 mm: memcontrol: rewrite uncharge API
The memcg uncharging code that is involved towards the end of a page's
lifetime - truncation, reclaim, swapout, migration - is impressively
complicated and fragile.

Because anonymous and file pages were always charged before they had their
page->mapping established, uncharges had to happen when the page type
could still be known from the context; as in unmap for anonymous, page
cache removal for file and shmem pages, and swap cache truncation for swap
pages.  However, these operations happen well before the page is actually
freed, and so a lot of synchronization is necessary:

- Charging, uncharging, page migration, and charge migration all need
  to take a per-page bit spinlock as they could race with uncharging.

- Swap cache truncation happens during both swap-in and swap-out, and
  possibly repeatedly before the page is actually freed.  This means
  that the memcg swapout code is called from many contexts that make
  no sense and it has to figure out the direction from page state to
  make sure memory and memory+swap are always correctly charged.

- On page migration, the old page might be unmapped but then reused,
  so memcg code has to prevent untimely uncharging in that case.
  Because this code - which should be a simple charge transfer - is so
  special-cased, it is not reusable for replace_page_cache().

But now that charged pages always have a page->mapping, introduce
mem_cgroup_uncharge(), which is called after the final put_page(), when we
know for sure that nobody is looking at the page anymore.

For page migration, introduce mem_cgroup_migrate(), which is called after
the migration is successful and the new page is fully rmapped.  Because
the old page is no longer uncharged after migration, prevent double
charges by decoupling the page's memcg association (PCG_USED and
pc->mem_cgroup) from the page holding an actual charge.  The new bits
PCG_MEM and PCG_MEMSW represent the respective charges and are transferred
to the new page during migration.

mem_cgroup_migrate() is suitable for replace_page_cache() as well,
which gets rid of mem_cgroup_replace_page_cache().  However, care
needs to be taken because both the source and the target page can
already be charged and on the LRU when fuse is splicing: grab the page
lock on the charge moving side to prevent changing pc->mem_cgroup of a
page under migration.  Also, the lruvecs of both pages change as we
uncharge the old and charge the new during migration, and putback may
race with us, so grab the lru lock and isolate the pages iff on LRU to
prevent races and ensure the pages are on the right lruvec afterward.

Swap accounting is massively simplified: because the page is no longer
uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can
transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry
before the final put_page() in page reclaim.

Finally, page_cgroup changes are now protected by whatever protection the
page itself offers: anonymous pages are charged under the page table lock,
whereas page cache insertions, swapin, and migration hold the page lock.
Uncharging happens under full exclusion with no outstanding references.
Charging and uncharging also ensure that the page is off-LRU, which
serializes against charge migration.  Remove the very costly page_cgroup
lock and set pc->flags non-atomically.

[mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable]
[vdavydov@parallels.com: fix flags definition]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Tested-by: Jet Chen <jet.chen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:17 -07:00
Johannes Weiner 00501b531c mm: memcontrol: rewrite charge API
These patches rework memcg charge lifetime to integrate more naturally
with the lifetime of user pages.  This drastically simplifies the code and
reduces charging and uncharging overhead.  The most expensive part of
charging and uncharging is the page_cgroup bit spinlock, which is removed
entirely after this series.

Here are the top-10 profile entries of a stress test that reads a 128G
sparse file on a freshly booted box, without even a dedicated cgroup (i.e.
 executing in the root memcg).  Before:

    15.36%              cat  [kernel.kallsyms]   [k] copy_user_generic_string
    13.31%              cat  [kernel.kallsyms]   [k] memset
    11.48%              cat  [kernel.kallsyms]   [k] do_mpage_readpage
     4.23%              cat  [kernel.kallsyms]   [k] get_page_from_freelist
     2.38%              cat  [kernel.kallsyms]   [k] put_page
     2.32%              cat  [kernel.kallsyms]   [k] __mem_cgroup_commit_charge
     2.18%          kswapd0  [kernel.kallsyms]   [k] __mem_cgroup_uncharge_common
     1.92%          kswapd0  [kernel.kallsyms]   [k] shrink_page_list
     1.86%              cat  [kernel.kallsyms]   [k] __radix_tree_lookup
     1.62%              cat  [kernel.kallsyms]   [k] __pagevec_lru_add_fn

After:

    15.67%           cat  [kernel.kallsyms]   [k] copy_user_generic_string
    13.48%           cat  [kernel.kallsyms]   [k] memset
    11.42%           cat  [kernel.kallsyms]   [k] do_mpage_readpage
     3.98%           cat  [kernel.kallsyms]   [k] get_page_from_freelist
     2.46%           cat  [kernel.kallsyms]   [k] put_page
     2.13%       kswapd0  [kernel.kallsyms]   [k] shrink_page_list
     1.88%           cat  [kernel.kallsyms]   [k] __radix_tree_lookup
     1.67%           cat  [kernel.kallsyms]   [k] __pagevec_lru_add_fn
     1.39%       kswapd0  [kernel.kallsyms]   [k] free_pcppages_bulk
     1.30%           cat  [kernel.kallsyms]   [k] kfree

As you can see, the memcg footprint has shrunk quite a bit.

   text    data     bss     dec     hex filename
  37970    9892     400   48262    bc86 mm/memcontrol.o.old
  35239    9892     400   45531    b1db mm/memcontrol.o

This patch (of 4):

The memcg charge API charges pages before they are rmapped - i.e.  have an
actual "type" - and so every callsite needs its own set of charge and
uncharge functions to know what type is being operated on.  Worse,
uncharge has to happen from a context that is still type-specific, rather
than at the end of the page's lifetime with exclusive access, and so
requires a lot of synchronization.

Rewrite the charge API to provide a generic set of try_charge(),
commit_charge() and cancel_charge() transaction operations, much like
what's currently done for swap-in:

  mem_cgroup_try_charge() attempts to reserve a charge, reclaiming
  pages from the memcg if necessary.

  mem_cgroup_commit_charge() commits the page to the charge once it
  has a valid page->mapping and PageAnon() reliably tells the type.

  mem_cgroup_cancel_charge() aborts the transaction.

This reduces the charge API and enables subsequent patches to
drastically simplify uncharging.

As pages need to be committed after rmap is established but before they
are added to the LRU, page_add_new_anon_rmap() must stop doing LRU
additions again.  Revive lru_cache_add_active_or_unevictable().

[hughd@google.com: fix shmem_unuse]
[hughd@google.com: Add comments on the private use of -EAGAIN]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:17 -07:00
Miklos Szeredi 37456771c5 shmem: support RENAME_EXCHANGE
This is really simple in tmpfs since the VFS already takes care of
shuffling the dentries.  Just adjust nlink on parent directories and touch
c & mtimes.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07 14:40:09 -04:00
Miklos Szeredi 3b69ff51d0 shmem: support RENAME_NOREPLACE
Implement ->rename2 instead of ->rename.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07 14:40:09 -04:00
Wang Sheng-Hui fed400a181 mm/shmem.c: remove the unused gfp arg to shmem_add_to_page_cache()
The gfp arg is not used in shmem_add_to_page_cache.  Remove this unused
arg.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:20 -07:00
Hugh Dickins eb39d618f9 mm: replace init_page_accessed by __SetPageReferenced
Do we really need an exported alias for __SetPageReferenced()? Its
callers better know what they're doing, in which case the page would not
be already marked referenced.  Kill init_page_accessed(), just
__SetPageReferenced() inline.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:19 -07:00
Konstantin Khlebnikov 7714251799 shmem: update memory reservation on truncate
A shared anonymous mapping created without MAP_NORESERVE holds memory
reservation for whole range of shmem segment.  Usually there is no way
to change its size, but /proc/<pid>/map_files/...  (available if
CONFIG_CHECKPOINT_RESTORE=y) allows that.

This patch adjusts the memory reservation in shmem_setattr().

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:19 -07:00
Konstantin Khlebnikov 66ee4b8887 shmem: fix double uncharge in __shmem_file_setup()
If __shmem_file_setup() fails on struct file allocation it uncharges
memory commitment twice: first by shmem_unacct_size() and second time
implicitly in shmem_evict_inode() when it kills the newly created inode.

This patch removes shmem_unacct_size() from error path if the inode was
already there.

Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:18 -07:00
Hugh Dickins b1a366500b shmem: fix splicing from a hole while it's punched
shmem_fault() is the actual culprit in trinity's hole-punch starvation,
and the most significant cause of such problems: since a page faulted is
one that then appears page_mapped(), needing unmap_mapping_range() and
i_mmap_mutex to be unmapped again.

But it is not the only way in which a page can be brought into a hole in
the radix_tree while that hole is being punched; and Vlastimil's testing
implies that if enough other processors are busy filling in the hole,
then shmem_undo_range() can be kept from completing indefinitely.

shmem_file_splice_read() is the main other user of SGP_CACHE, which can
instantiate shmem pagecache pages in the read-only case (without holding
i_mutex, so perhaps concurrently with a hole-punch).  Probably it's
silly not to use SGP_READ already (using the ZERO_PAGE for holes): which
ought to be safe, but might bring surprises - not a change to be rushed.

shmem_read_mapping_page_gfp() is an internal interface used by
drivers/gpu/drm GEM (and next by uprobes): it should be okay.  And
shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when
called internally by the kernel (perhaps for a stacking filesystem,
which might rely on holes to be reserved): it's unclear whether it could
be provoked to keep hole-punch busy or not.

We could apply the same umbrella as now used in shmem_fault() to
shmem_file_splice_read() and the others; but it looks ugly, and use over
a range raises questions - should it actually be per page? can these get
starved themselves?

The origin of this part of the problem is my v3.1 commit d0823576bf
("mm: pincer in truncate_inode_pages_range"), once it was duplicated
into shmem.c.  It seemed like a nice idea at the time, to ensure
(barring RCU lookup fuzziness) that there's an instant when the entire
hole is empty; but the indefinitely repeated scans to ensure that make
it vulnerable.

Revert that "enhancement" to hole-punch from shmem_undo_range(), but
retain the unproblematic rescanning when it's truncating; add a couple
of comments there.

Remove the "indices[0] >= end" test: that is now handled satisfactorily
by the inner loop, and mem_cgroup_uncharge_start()/end() are too light
to be worth avoiding here.

But if we do not always loop indefinitely, we do need to handle the case
of swap swizzled back to page before shmem_free_swap() gets it: add a
retry for that case, as suggested by Konstantin Khlebnikov; and for the
case of page swizzled back to swap, as suggested by Johannes Weiner.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <stable@vger.kernel.org>	[3.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-23 15:10:55 -07:00
Hugh Dickins 8e205f779d shmem: fix faulting into a hole, not taking i_mutex
Commit f00cdc6df7 ("shmem: fix faulting into a hole while it's
punched") was buggy: Sasha sent a lockdep report to remind us that
grabbing i_mutex in the fault path is a no-no (write syscall may already
hold i_mutex while faulting user buffer).

We tried a completely different approach (see following patch) but that
proved inadequate: good enough for a rational workload, but not good
enough against trinity - which forks off so many mappings of the object
that contention on i_mmap_mutex while hole-puncher holds i_mutex builds
into serious starvation when concurrent faults force the puncher to fall
back to single-page unmap_mapping_range() searches of the i_mmap tree.

So return to the original umbrella approach, but keep away from i_mutex
this time.  We really don't want to bloat every shmem inode with a new
mutex or completion, just to protect this unlikely case from trinity.
So extend the original with wait_queue_head on stack at the hole-punch
end, and wait_queue item on the stack at the fault end.

This involves further use of i_lock to guard against the races: lockdep
has been happy so far, and I see fs/inode.c:unlock_new_inode() holds
i_lock around wake_up_bit(), which is comparable to what we do here.
i_lock is more convenient, but we could switch to shmem's info->lock.

This issue has been tagged with CVE-2014-4171, which will require commit
f00cdc6df7 and this and the following patch to be backported: we
suggest to 3.1+, though in fact the trinity forkbomb effect might go
back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might
not, since much has changed, with i_mmap_mutex a spinlock before 3.0.
Anyone running trinity on 3.0 and earlier? I don't think we need care.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <stable@vger.kernel.org>	[3.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-23 15:10:54 -07:00
Hugh Dickins 66d2f4d28c shmem: fix init_page_accessed use to stop !PageLRU bug
Under shmem swapping load, I sometimes hit the VM_BUG_ON_PAGE(!PageLRU)
in isolate_lru_pages() at mm/vmscan.c:1281!

Commit 2457aec637 ("mm: non-atomically mark page accessed during page
cache allocation where possible") looks like interrupted work-in-progress.

mm/filemap.c's call to init_page_accessed() is fine, but not mm/shmem.c's
- shmem_write_begin() is clearly wrong to use it after shmem_getpage(),
when the page is always visible in radix_tree, and often already on LRU.

Revert change to shmem_write_begin(), and use init_page_accessed() or
mark_page_accessed() appropriately for SGP_WRITE in shmem_getpage_gfp().

SGP_WRITE also covers shmem_symlink(), which did not mark_page_accessed()
before; but since many other filesystems use [__]page_symlink(), which did
and does mark the page accessed, consider this as rectifying an oversight.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 09:21:54 -07:00
Hugh Dickins f00cdc6df7 shmem: fix faulting into a hole while it's punched
Trinity finds that mmap access to a hole while it's punched from shmem
can prevent the madvise(MADV_REMOVE) or fallocate(FALLOC_FL_PUNCH_HOLE)
from completing, until the reader chooses to stop; with the puncher's
hold on i_mutex locking out all other writers until it can complete.

It appears that the tmpfs fault path is too light in comparison with its
hole-punching path, lacking an i_data_sem to obstruct it; but we don't
want to slow down the common case.

Extend shmem_fallocate()'s existing range notification mechanism, so
shmem_fault() can refrain from faulting pages into the hole while it's
punched, waiting instead on i_mutex (when safe to sleep; or repeatedly
faulting when not).

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:44 -07:00
Hugh Dickins 13ace4d0d9 tmpfs: ZERO_RANGE and COLLAPSE_RANGE not currently supported
I was well aware of FALLOC_FL_ZERO_RANGE and FALLOC_FL_COLLAPSE_RANGE
support being added to fallocate(); but didn't realize until now that I
had been too stupid to future-proof shmem_fallocate() against new
additions.  -EOPNOTSUPP instead of going on to ordinary fallocation.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: <stable@vger.kernel.org>	[3.15]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:43 -07:00
Linus Torvalds 16b9057804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "This the bunch that sat in -next + lock_parent() fix.  This is the
  minimal set; there's more pending stuff.

  In particular, I really hope to get acct.c fixes merged this cycle -
  we need that to deal sanely with delayed-mntput stuff.  In the next
  pile, hopefully - that series is fairly short and localized
  (kernel/acct.c, fs/super.c and fs/namespace.c).  In this pile: more
  iov_iter work.  Most of prereqs for ->splice_write with sane locking
  order are there and Kent's dio rewrite would also fit nicely on top of
  this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
  lock_parent: don't step on stale ->d_parent of all-but-freed one
  kill generic_file_splice_write()
  ceph: switch to iter_file_splice_write()
  shmem: switch to iter_file_splice_write()
  nfs: switch to iter_splice_write_file()
  fs/splice.c: remove unneeded exports
  ocfs2: switch to iter_file_splice_write()
  ->splice_write() via ->write_iter()
  bio_vec-backed iov_iter
  optimize copy_page_{to,from}_iter()
  bury generic_file_aio_{read,write}
  lustre: get rid of messing with iovecs
  ceph: switch to ->write_iter()
  ceph_sync_direct_write: stop poking into iov_iter guts
  ceph_sync_read: stop poking into iov_iter guts
  new helper: copy_page_from_iter()
  fuse: switch to ->write_iter()
  btrfs: switch to ->write_iter()
  ocfs2: switch to ->write_iter()
  xfs: switch to ->write_iter()
  ...
2014-06-12 10:30:18 -07:00
Al Viro f6cb85d00e shmem: switch to iter_file_splice_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-06-12 00:21:12 -04:00