Commit Graph

610 Commits

Author SHA1 Message Date
Christoph Lameter 44c5356fb4 slab common: add functions for kmem_cache_node access
The patchset provides two new functions in mm/slab.h and modifies SLAB
and SLUB to use these.  The kmem_cache_node structure is shared between
both allocators and the use of common accessors will allow us to move
more code into slab_common.c in the future.

This patch (of 3):

These functions allow to eliminate repeatedly used code in both SLAB and
SLUB and also allow for the insertion of debugging code that may be
needed in the development process.

Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:13 -07:00
Joonsoo Kim 8a5b20aeba slub: fix off by one in number of slab tests
min_partial means minimum number of slab cached in node partial list.
So, if nr_partial is less than it, we keep newly empty slab on node
partial list rather than freeing it.  But if nr_partial is equal or
greater than it, it means that we have enough partial slabs so should
free newly empty slab.  Current implementation missed the equal case so
if we set min_partial is 0, then, at least one slab could be cached.
This is critical problem to kmemcg destroying logic because it doesn't
works properly if some slabs is cached.  This patch fixes this problem.

Fixes 91cb69620284 ("slub: make dead memcg caches discard free slabs
immediately").

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 09:21:53 -07:00
Joonsoo Kim 844e4d66f4 slub: search partial list on numa_mem_id(), instead of numa_node_id()
Currently, if allocation constraint to node is NUMA_NO_NODE, we search a
partial slab on numa_node_id() node.  This doesn't work properly on a
system having memoryless nodes, since it can have no memory on that node
so there must be no partial slab on that node.

On that node, page allocation always falls back to numa_mem_id() first.
So searching a partial slab on numa_node_id() in that case is the proper
solution for the memoryless node case.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Han Pingtian <hanpt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:06 -07:00
Christoph Lameter 7c8e0181e6 mm: replace __get_cpu_var uses with this_cpu_ptr
Replace places where __get_cpu_var() is used for an address calculation
with this_cpu_ptr().

Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:03 -07:00
Vladimir Davydov c67a8a685a memcg, slab: merge memcg_{bind,release}_pages to memcg_{un}charge_slab
Currently we have two pairs of kmemcg-related functions that are called on
slab alloc/free.  The first is memcg_{bind,release}_pages that count the
total number of pages allocated on a kmem cache.  The second is
memcg_{un}charge_slab that {un}charge slab pages to kmemcg resource
counter.  Let's just merge them to keep the code clean.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:01 -07:00
Vladimir Davydov 03afc0e25f slab: get_online_mems for kmem_cache_{create,destroy,shrink}
When we create a sl[au]b cache, we allocate kmem_cache_node structures
for each online NUMA node.  To handle nodes taken online/offline, we
register memory hotplug notifier and allocate/free kmem_cache_node
corresponding to the node that changes its state for each kmem cache.

To synchronize between the two paths we hold the slab_mutex during both
the cache creationg/destruction path and while tuning per-node parts of
kmem caches in memory hotplug handler, but that's not quite right,
because it does not guarantee that a newly created cache will have all
kmem_cache_nodes initialized in case it races with memory hotplug.  For
instance, in case of slub:

    CPU0                            CPU1
    ----                            ----
    kmem_cache_create:              online_pages:
     __kmem_cache_create:            slab_memory_callback:
                                      slab_mem_going_online_callback:
                                       lock slab_mutex
                                       for each slab_caches list entry
                                           allocate kmem_cache node
                                       unlock slab_mutex
      lock slab_mutex
      init_kmem_cache_nodes:
       for_each_node_state(node, N_NORMAL_MEMORY)
           allocate kmem_cache node
      add kmem_cache to slab_caches list
      unlock slab_mutex
                                    online_pages (continued):
                                     node_states_set_node

As a result we'll get a kmem cache with not all kmem_cache_nodes
allocated.

To avoid issues like that we should hold get/put_online_mems() during
the whole kmem cache creation/destruction/shrink paths, just like we
deal with cpu hotplug.  This patch does the trick.

Note, that after it's applied, there is no need in taking the slab_mutex
for kmem_cache_shrink any more, so it is removed from there.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:59 -07:00
Vladimir Davydov bfc8c90139 mem-hotplug: implement get/put_online_mems
kmem_cache_{create,destroy,shrink} need to get a stable value of
cpu/node online mask, because they init/destroy/access per-cpu/node
kmem_cache parts, which can be allocated or destroyed on cpu/mem
hotplug.  To protect against cpu hotplug, these functions use
{get,put}_online_cpus.  However, they do nothing to synchronize with
memory hotplug - taking the slab_mutex does not eliminate the
possibility of race as described in patch 2.

What we need there is something like get_online_cpus, but for memory.
We already have lock_memory_hotplug, which serves for the purpose, but
it's a bit of a hammer right now, because it's backed by a mutex.  As a
result, it imposes some limitations to locking order, which are not
desirable, and can't be used just like get_online_cpus.  That's why in
patch 1 I substitute it with get/put_online_mems, which work exactly
like get/put_online_cpus except they block not cpu, but memory hotplug.

[ v1 can be found at https://lkml.org/lkml/2014/4/6/68.  I NAK'ed it by
  myself, because it used an rw semaphore for get/put_online_mems,
  making them dead lock prune.  ]

This patch (of 2):

{un}lock_memory_hotplug, which is used to synchronize against memory
hotplug, is currently backed by a mutex, which makes it a bit of a
hammer - threads that only want to get a stable value of online nodes
mask won't be able to proceed concurrently.  Also, it imposes some
strong locking ordering rules on it, which narrows down the set of its
usage scenarios.

This patch introduces get/put_online_mems, which are the same as
get/put_online_cpus, but for memory hotplug, i.e.  executing a code
inside a get/put_online_mems section will guarantee a stable value of
online nodes, present pages, etc.

lock_memory_hotplug()/unlock_memory_hotplug() are removed altogether.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:59 -07:00
Vladimir Davydov 52383431b3 mm: get rid of __GFP_KMEMCG
Currently to allocate a page that should be charged to kmemcg (e.g.
threadinfo), we pass __GFP_KMEMCG flag to the page allocator.  The page
allocated is then to be freed by free_memcg_kmem_pages.  Apart from
looking asymmetrical, this also requires intrusion to the general
allocation path.  So let's introduce separate functions that will
alloc/free pages charged to kmemcg.

The new functions are called alloc_kmem_pages and free_kmem_pages.  They
should be used when the caller actually would like to use kmalloc, but
has to fall back to the page allocator for the allocation is large.
They only differ from alloc_pages and free_pages in that besides
allocating or freeing pages they also charge them to the kmem resource
counter of the current memory cgroup.

[sfr@canb.auug.org.au: export kmalloc_order() to modules]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:56 -07:00
Vladimir Davydov 5dfb417509 sl[au]b: charge slabs to kmemcg explicitly
We have only a few places where we actually want to charge kmem so
instead of intruding into the general page allocation path with
__GFP_KMEMCG it's better to explictly charge kmem there.  All kmem
charges will be easier to follow that way.

This is a step towards removing __GFP_KMEMCG.  It removes __GFP_KMEMCG
from memcg caches' allocflags.  Instead it makes slab allocation path
call memcg_charge_kmem directly getting memcg to charge from the cache's
memcg params.

This also eliminates any possibility of misaccounting an allocation
going from one memcg's cache to another memcg, because now we always
charge slabs against the memcg the cache belongs to.  That's why this
patch removes the big comment to memcg_kmem_get_cache.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:56 -07:00
Dave Hansen 8eae149267 mm: slub: fix ALLOC_SLOWPATH stat
There used to be only one path out of __slab_alloc(), and ALLOC_SLOWPATH
got bumped in that exit path.  Now there are two, and a bunch of gotos.
ALLOC_SLOWPATH can now get set more than once during a single call to
__slab_alloc() which is pretty bogus.  Here's the sequence:

1. Enter __slab_alloc(), fall through all the way to the
   stat(s, ALLOC_SLOWPATH);
2. hit 'if (!freelist)', and bump DEACTIVATE_BYPASS, jump to
   new_slab (goto #1)
3. Hit 'if (c->partial)', bump CPU_PARTIAL_ALLOC, goto redo
   (goto #2)
4. Fall through in the same path we did before all the way to
   stat(s, ALLOC_SLOWPATH)
5. bump ALLOC_REFILL stat, then return

Doing this is obviously bogus.  It keeps us from being able to
accurately compare ALLOC_SLOWPATH vs.  ALLOC_FASTPATH.  It also means
that the total number of allocs always exceeds the total number of
frees.

This patch moves stat(s, ALLOC_SLOWPATH) to be called from the same
place that __slab_alloc() is.  This makes it much less likely that
ALLOC_SLOWPATH will get botched again in the spaghetti-code inside
__slab_alloc().

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:56 -07:00
David Rientjes 9a02d69993 mm, slab: suppress out of memory warning unless debug is enabled
When the slab or slub allocators cannot allocate additional slab pages,
they emit diagnostic information to the kernel log such as current
number of slabs, number of objects, active objects, etc.  This is always
coupled with a page allocation failure warning since it is controlled by
!__GFP_NOWARN.

Suppress this out of memory warning if the allocator is configured
without debug supported.  The page allocation failure warning will
indicate it is a failed slab allocation, the order, and the gfp mask, so
this is only useful to diagnose allocator issues.

Since CONFIG_SLUB_DEBUG is already enabled by default for the slub
allocator, there is no functional change with this patch.  If debug is
disabled, however, the warnings are now suppressed.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:56 -07:00
Fabian Frederick ecc42fbe95 mm/slub.c: convert vnsprintf-static to va_format
Inspired by Joe Perches suggestion in ntfs logging clean-up.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Joe Perches <joe@perches.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:55 -07:00
Fabian Frederick f9f5828594 mm/slub.c: convert printk to pr_foo()
All printk(KERN_foo converted to pr_foo()

Default printk converted to pr_warn()

Coalesce format fragments

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Joe Perches <joe@perches.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:55 -07:00
Christoph Lameter 41a212859a slub: use sysfs'es release mechanism for kmem_cache
debugobjects warning during netfilter exit:

    ------------[ cut here ]------------
    WARNING: CPU: 6 PID: 4178 at lib/debugobjects.c:260 debug_print_object+0x8d/0xb0()
    ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20
    Modules linked in:
    CPU: 6 PID: 4178 Comm: kworker/u16:2 Tainted: G        W 3.11.0-next-20130906-sasha #3984
    Workqueue: netns cleanup_net
    Call Trace:
      dump_stack+0x52/0x87
      warn_slowpath_common+0x8c/0xc0
      warn_slowpath_fmt+0x46/0x50
      debug_print_object+0x8d/0xb0
      __debug_check_no_obj_freed+0xa5/0x220
      debug_check_no_obj_freed+0x15/0x20
      kmem_cache_free+0x197/0x340
      kmem_cache_destroy+0x86/0xe0
      nf_conntrack_cleanup_net_list+0x131/0x170
      nf_conntrack_pernet_exit+0x5d/0x70
      ops_exit_list+0x5e/0x70
      cleanup_net+0xfb/0x1c0
      process_one_work+0x338/0x550
      worker_thread+0x215/0x350
      kthread+0xe7/0xf0
      ret_from_fork+0x7c/0xb0

Also during dcookie cleanup:

    WARNING: CPU: 12 PID: 9725 at lib/debugobjects.c:260 debug_print_object+0x8c/0xb0()
    ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x20
    Modules linked in:
    CPU: 12 PID: 9725 Comm: trinity-c141 Not tainted 3.15.0-rc2-next-20140423-sasha-00018-gc4ff6c4 #408
    Call Trace:
      dump_stack (lib/dump_stack.c:52)
      warn_slowpath_common (kernel/panic.c:430)
      warn_slowpath_fmt (kernel/panic.c:445)
      debug_print_object (lib/debugobjects.c:262)
      __debug_check_no_obj_freed (lib/debugobjects.c:697)
      debug_check_no_obj_freed (lib/debugobjects.c:726)
      kmem_cache_free (mm/slub.c:2689 mm/slub.c:2717)
      kmem_cache_destroy (mm/slab_common.c:363)
      dcookie_unregister (fs/dcookies.c:302 fs/dcookies.c:343)
      event_buffer_release (arch/x86/oprofile/../../../drivers/oprofile/event_buffer.c:153)
      __fput (fs/file_table.c:217)
      ____fput (fs/file_table.c:253)
      task_work_run (kernel/task_work.c:125 (discriminator 1))
      do_notify_resume (include/linux/tracehook.h:196 arch/x86/kernel/signal.c:751)
      int_signal (arch/x86/kernel/entry_64.S:807)

Sysfs has a release mechanism.  Use that to release the kmem_cache
structure if CONFIG_SYSFS is enabled.

Only slub is changed - slab currently only supports /proc/slabinfo and
not /sys/kernel/slab/*.  We talked about adding that and someone was
working on it.

[akpm@linux-foundation.org: fix CONFIG_SYSFS=n build]
[akpm@linux-foundation.org: fix CONFIG_SYSFS=n build even more]
Signed-off-by: Christoph Lameter <cl@linux.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Greg KH <greg@kroah.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 13:04:59 -07:00
Vladimir Davydov 93030d83b9 slub: fix memcg_propagate_slab_attrs
After creating a cache for a memcg we should initialize its sysfs attrs
with the values from its parent.  That's what memcg_propagate_slab_attrs
is for.  Currently it's broken - we clearly muddled root-vs-memcg caches
there.  Let's fix it up.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-06 13:04:58 -07:00
Linus Torvalds bf3a340738 Merge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull slab changes from Pekka Enberg:
 "The biggest change is byte-sized freelist indices which reduces slab
  freelist memory usage:

    https://lkml.org/lkml/2013/12/2/64"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  mm: slab/slub: use page->list consistently instead of page->lru
  mm/slab.c: cleanup outdated comments and unify variables naming
  slab: fix wrongly used macro
  slub: fix high order page allocation problem with __GFP_NOFAIL
  slab: Make allocations with GFP_ZERO slightly more efficient
  slab: make more slab management structure off the slab
  slab: introduce byte sized index for the freelist of a slab
  slab: restrict the number of objects in a slab
  slab: introduce helper functions to get/set free object
  slab: factor out calculate nr objects in cache_estimate
2014-04-13 13:28:13 -07:00
Christoph Lameter 88da03a676 slub: use raw_cpu_inc for incrementing statistics
Statistics are not critical to the operation of the allocation but
should also not cause too much overhead.

When __this_cpu_inc is altered to check if preemption is disabled this
triggers.  Use raw_cpu_inc to avoid the checks.  Using this_cpu_ops may
cause interrupt disable/enable sequences on various arches which may
significantly impact allocator performance.

[akpm@linux-foundation.org: add comment]
Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:14 -07:00
Dave Jones 54b6a73102 slub: fix leak of 'name' in sysfs_slab_add
The failure paths of sysfs_slab_add don't release the allocation of
'name' made by create_unique_id() a few lines above the context of the
diff below.  Create a common exit path to make it more obvious what
needs freeing.

[vdavydov@parallels.com: free the name only if !unmergeable]
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:13 -07:00
Vladimir Davydov 9a41707bd3 slub: rework sysfs layout for memcg caches
Currently, we try to arrange sysfs entries for memcg caches in the same
manner as for global caches.  Apart from turning /sys/kernel/slab into a
mess when there are a lot of kmem-active memcgs created, it actually
does not work properly - we won't create more than one link to a memcg
cache in case its parent is merged with another cache.  For instance, if
A is a root cache merged with another root cache B, we will have the
following sysfs setup:

  X
  A -> X
  B -> X

where X is some unique id (see create_unique_id()).  Now if memcgs M and
N start to allocate from cache A (or B, which is the same), we will get:

  X
  X:M
  X:N
  A -> X
  B -> X
  A:M -> X:M
  A:N -> X:N

Since B is an alias for A, we won't get entries B:M and B:N, which is
confusing.

It is more logical to have entries for memcg caches under the
corresponding root cache's sysfs directory.  This would allow us to keep
sysfs layout clean, and avoid such inconsistencies like one described
above.

This patch does the trick.  It creates a "cgroup" kset in each root
cache kobject to keep its children caches there.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:13 -07:00
Vladimir Davydov 84d0ddd6b0 slub: adjust memcg caches when creating cache alias
Otherwise, kzalloc() called from a memcg won't clear the whole object.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:13 -07:00
Vladimir Davydov a44cb94491 memcg, slab: never try to merge memcg caches
When a kmem cache is created (kmem_cache_create_memcg()), we first try to
find a compatible cache that already exists and can handle requests from
the new cache, i.e.  has the same object size, alignment, ctor, etc.  If
there is such a cache, we do not create any new caches, instead we simply
increment the refcount of the cache found and return it.

Currently we do this procedure not only when creating root caches, but
also for memcg caches.  However, there is no point in that, because, as
every memcg cache has exactly the same parameters as its parent and cache
merging cannot be turned off in runtime (only on boot by passing
"slub_nomerge"), the root caches of any two potentially mergeable memcg
caches should be merged already, i.e.  it must be the same root cache, and
therefore we couldn't even get to the memcg cache creation, because it
already exists.

The only exception is boot caches - they are explicitly forbidden to be
merged by setting their refcount to -1.  There are currently only two of
them - kmem_cache and kmem_cache_node, which are used in slab internals (I
do not count kmalloc caches as their refcount is set to 1 immediately
after creation).  Since they are prevented from merging preliminary I
guess we should avoid to merge their children too.

So let's remove the useless code responsible for merging memcg caches.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:12 -07:00
David Rientjes 2a389610a7 mm, mempolicy: rename slab_node for clarity
slab_node() is actually a mempolicy function, so rename it to
mempolicy_slab_node() to make it clearer that it used for processes with
mempolicies.

At the same time, cleanup its code by saving numa_mem_id() in a local
variable (since we require a node with memory, not just any node) and
remove an obsolete comment that assumes the mempolicy is actually passed
into the function.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Tim Hockin <thockin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:54 -07:00
Vladimir Davydov 421af243b1 slub: do not drop slab_mutex for sysfs_slab_add
We release the slab_mutex while calling sysfs_slab_add from
__kmem_cache_create since commit 66c4c35c6b ("slub: Do not hold
slub_lock when calling sysfs_slab_add()"), because kobject_uevent called
by sysfs_slab_add might block waiting for the usermode helper to exec,
which would result in a deadlock if we took the slab_mutex while
executing it.

However, apart from complicating synchronization rules, releasing the
slab_mutex on kmem cache creation can result in a kmemcg-related race.
The point is that we check if the memcg cache exists before going to
__kmem_cache_create, but register the new cache in memcg subsys after
it.  Since we can drop the mutex there, several threads can see that the
memcg cache does not exist and proceed to creating it, which is wrong.

Fortunately, recently kobject_uevent was patched to call the usermode
helper with the UMH_NO_WAIT flag, making the deadlock impossible.
Therefore there is no point in releasing the slab_mutex while calling
sysfs_slab_add, so let's simplify kmem_cache_create synchronization and
fix the kmemcg-race mentioned above by holding the slab_mutex during the
whole cache creation path.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Greg KH <greg@kroah.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:05 -07:00
Mel Gorman d26914d117 mm: optimize put_mems_allowed() usage
Since put_mems_allowed() is strictly optional, its a seqcount retry, we
don't need to evaluate the function if the allocation was in fact
successful, saving a smp_rmb some loads and comparisons on some relative
fast-paths.

Since the naming, get/put_mems_allowed() does suggest a mandatory
pairing, rename the interface, as suggested by Mel, to resemble the
seqcount interface.

This gives us: read_mems_allowed_begin() and read_mems_allowed_retry(),
where it is important to note that the return value of the latter call
is inverted from its previous incarnation.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:58 -07:00
Joonsoo Kim 80c3a9981a slub: fix high order page allocation problem with __GFP_NOFAIL
SLUB already try to allocate high order page with clearing __GFP_NOFAIL.
But, when allocating shadow page for kmemcheck, it missed clearing
the flag. This trigger WARN_ON_ONCE() reported by Christian Casteyde.

https://bugzilla.kernel.org/show_bug.cgi?id=65991
https://lkml.org/lkml/2013/12/3/764

This patch fix this situation by using same allocation flag as original
allocation.

Reported-by: Christian Casteyde <casteyde.christian@free.fr>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2014-03-27 14:27:34 +02:00
Steven Rostedt 1e4dd9461f slub: do not assert not having lock in removing freed partial
Vladimir reported the following issue:

Commit c65c1877bd ("slub: use lockdep_assert_held") requires
remove_partial() to be called with n->list_lock held, but free_partial()
called from kmem_cache_close() on cache destruction does not follow this
rule, leading to a warning:

  WARNING: CPU: 0 PID: 2787 at mm/slub.c:1536 __kmem_cache_shutdown+0x1b2/0x1f0()
  Modules linked in:
  CPU: 0 PID: 2787 Comm: modprobe Tainted: G        W    3.14.0-rc1-mm1+ #1
  Hardware name:
   0000000000000600 ffff88003ae1dde8 ffffffff816d9583 0000000000000600
   0000000000000000 ffff88003ae1de28 ffffffff8107c107 0000000000000000
   ffff880037ab2b00 ffff88007c240d30 ffffea0001ee5280 ffffea0001ee52a0
  Call Trace:
    __kmem_cache_shutdown+0x1b2/0x1f0
    kmem_cache_destroy+0x43/0xf0
    xfs_destroy_zones+0x103/0x110 [xfs]
    exit_xfs_fs+0x38/0x4e4 [xfs]
    SyS_delete_module+0x19a/0x1f0
    system_call_fastpath+0x16/0x1b

His solution was to add a spinlock in order to quiet lockdep.  Although
there would be no contention to adding the lock, that lock also requires
disabling of interrupts which will have a larger impact on the system.

Instead of adding a spinlock to a location where it is not needed for
lockdep, make a __remove_partial() function that does not test if the
list_lock is held, as no one should have it due to it being freed.

Also added a __add_partial() function that does not do the lock
validation either, as it is not needed for the creation of the cache.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10 16:01:42 -08:00
David Rientjes 255d0884f5 mm/slub.c: list_lock may not be held in some circumstances
Commit c65c1877bd ("slub: use lockdep_assert_held") incorrectly
required that add_full() and remove_full() hold n->list_lock.  The lock
is only taken when kmem_cache_debug(s), since that's the only time it
actually does anything.

Require that the lock only be taken under such a condition.

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-10 16:01:41 -08:00
Linus Torvalds 7b383bef25 Merge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull SLAB changes from Pekka Enberg:
 "Random bug fixes that have accumulated in my inbox over the past few
  months"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  mm: Fix warning on make htmldocs caused by slab.c
  mm: slub: work around unneeded lockdep warning
  mm: sl[uo]b: fix misleading comments
  slub: Fix possible format string bug.
  slub: use lockdep_assert_held
  slub: Fix calculation of cpu slabs
  slab.h: remove duplicate kmalloc declaration and fix kernel-doc warnings
2014-02-02 11:30:08 -08:00
Dave Hansen 67b6c900dc mm: slub: work around unneeded lockdep warning
The slub code does some setup during early boot in
early_kmem_cache_node_alloc() with some local data.  There is no
possible way that another CPU can see this data, so the slub code
doesn't unnecessarily lock it.  However, some new lockdep asserts
check to make sure that add_partial() _always_ has the list_lock
held.

Just add the locking, even though it is technically unnecessary.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2014-01-31 13:41:26 +02:00
Dave Hansen a03208652d mm/slub.c: fix page->_count corruption (again)
Commit abca7c4965 ("mm: fix slab->page _count corruption when using
slub") notes that we can not _set_ a page->counters directly, except
when using a real double-cmpxchg.  Doing so can lose updates to
->_count.

That is an absolute rule:

        You may not *set* page->counters except via a cmpxchg.

Commit abca7c4965 fixed this for the folks who have the slub
cmpxchg_double code turned off at compile time, but it left the bad case
alone.  It can still be reached, and the same bug triggered in two
cases:

1. Turning on slub debugging at runtime, which is available on
   the distro kernels that I looked at.
2. On 64-bit CPUs with no CMPXCHG16B (some early AMD x86-64
   cpus, evidently)

There are at least 3 ways we could fix this:

1. Take all of the exising calls to cmpxchg_double_slab() and
   __cmpxchg_double_slab() and convert them to take an old, new
   and target 'struct page'.
2. Do (1), but with the newly-introduced 'slub_data'.
3. Do some magic inside the two cmpxchg...slab() functions to
   pull the counters out of new_counters and only set those
   fields in page->{inuse,frozen,objects}.

I've done (2) as well, but it's a bunch more code.  This patch is an
attempt at (3).  This was the most straightforward and foolproof way
that I could think to do this.

This would also technically allow us to get rid of the ugly

#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
       defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)

in 'struct page', but leaving it alone has the added benefit that
'counters' stays 'unsigned' instead of 'unsigned long', so all the
copies that the slub code does stay a bit smaller.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30 16:56:56 -08:00
Dave Hansen a0132ac0f2 mm/slub.c: do not VM_BUG_ON_PAGE() for temporary on-stack pages
Commit 309381feae ("mm: dump page when hitting a VM_BUG_ON using
VM_BUG_ON_PAGE") added a bunch of VM_BUG_ON_PAGE() calls.

But, most of the ones in the slub code are for _temporary_ 'struct
page's which are declared on the stack and likely have lots of gunk in
them.  Dumping their contents out will just confuse folks looking at
bad_page() output.  Plus, if we try to page_to_pfn() on them or
soemthing, we'll probably oops anyway.

Turn them back in to VM_BUG_ON()s.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-29 16:22:40 -08:00
Sasha Levin 309381feae mm: dump page when hitting a VM_BUG_ON using VM_BUG_ON_PAGE
Most of the VM_BUG_ON assertions are performed on a page.  Usually, when
one of these assertions fails we'll get a BUG_ON with a call stack and
the registers.

I've recently noticed based on the requests to add a small piece of code
that dumps the page to various VM_BUG_ON sites that the page dump is
quite useful to people debugging issues in mm.

This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what
VM_BUG_ON() does, also dumps the page before executing the actual
BUG_ON.

[akpm@linux-foundation.org: fix up includes]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:50 -08:00
Tetsuo Handa 26e4f20575 slub: Fix possible format string bug.
The "name" is determined at runtime and is parsed as format string.

Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2014-01-13 21:36:34 +02:00
Peter Zijlstra c65c1877bd slub: use lockdep_assert_held
Instead of using comments in an attempt at getting the locking right,
use proper assertions that actively warn you if you got it wrong.

Also add extra braces in a few sites to comply with coding-style.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2014-01-13 21:34:39 +02:00
Li Zefan 8afb1474db slub: Fix calculation of cpu slabs
/sys/kernel/slab/:t-0000048 # cat cpu_slabs
  231 N0=16 N1=215
  /sys/kernel/slab/:t-0000048 # cat slabs
  145 N0=36 N1=109

See, the number of slabs is smaller than that of cpu slabs.

The bug was introduced by commit 49e2258586
("slub: per cpu cache for partial pages").

We should use page->pages instead of page->pobjects when calculating
the number of cpu partial slabs. This also fixes the mapping of slabs
and nodes.

As there's no variable storing the number of total/active objects in
cpu partial slabs, and we don't have user interfaces requiring those
statistics, I just add WARN_ON for those cases.

Cc: <stable@vger.kernel.org> # 3.2+
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-12-29 13:44:45 +02:00
Linus Torvalds 24f971abbd Merge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull SLAB changes from Pekka Enberg:
 "The patches from Joonsoo Kim switch mm/slab.c to use 'struct page' for
  slab internals similar to mm/slub.c.  This reduces memory usage and
  improves performance:

    https://lkml.org/lkml/2013/10/16/155

  Rest of the changes are bug fixes from various people"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: (21 commits)
  mm, slub: fix the typo in mm/slub.c
  mm, slub: fix the typo in include/linux/slub_def.h
  slub: Handle NULL parameter in kmem_cache_flags
  slab: replace non-existing 'struct freelist *' with 'void *'
  slab: fix to calm down kmemleak warning
  slub: proper kmemleak tracking if CONFIG_SLUB_DEBUG disabled
  slab: rename slab_bufctl to slab_freelist
  slab: remove useless statement for checking pfmemalloc
  slab: use struct page for slab management
  slab: replace free and inuse in struct slab with newly introduced active
  slab: remove SLAB_LIMIT
  slab: remove kmem_bufctl_t
  slab: change the management method of free objects of the slab
  slab: use __GFP_COMP flag for allocating slab pages
  slab: use well-defined macro, virt_to_slab()
  slab: overloading the RCU head over the LRU for RCU free
  slab: remove cachep in struct slab_rcu
  slab: remove nodeid in struct slab
  slab: remove colouroff in struct slab
  slab: change return type of kmem_getpages() to struct page
  ...
2013-11-22 08:10:34 -08:00
Linus Torvalds 9073e1a804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual earth-shaking, news-breaking, rocket science pile from
  trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
  doc: add missing files to timers/00-INDEX
  timekeeping: Fix some trivial typos in comments
  mm: Fix some trivial typos in comments
  irq: Fix some trivial typos in comments
  NUMA: fix typos in Kconfig help text
  mm: update 00-INDEX
  doc: Documentation/DMA-attributes.txt fix typo
  DRM: comment: `halve' -> `half'
  Docs: Kconfig: `devlopers' -> `developers'
  doc: typo on word accounting in kprobes.c in mutliple architectures
  treewide: fix "usefull" typo
  treewide: fix "distingush" typo
  mm/Kconfig: Grammar s/an/a/
  kexec: Typo s/the/then/
  Documentation/kvm: Update cpuid documentation for steal time and pv eoi
  treewide: Fix common typo in "identify"
  __page_to_pfn: Fix typo in comment
  Correct some typos for word frequency
  clk: fixed-factor: Fix a trivial typo
  ...
2013-11-15 16:47:22 -08:00
Qiang Huang 2ade4de871 memcg, kmem: rename cache_from_memcg to cache_from_memcg_idx
We can't see the relationship with memcg from the parameters,
so the name with memcg_idx would be more reasonable.

Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:10 +09:00
Zhi Yong Wu 721ae22ae1 mm, slub: fix the typo in mm/slub.c
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-11-11 18:19:07 +02:00
Christoph Lameter c6f58d9b36 slub: Handle NULL parameter in kmem_cache_flags
Andreas Herrmann writes:

  When I've used slub_debug kernel option (e.g.
  "slub_debug=,skbuff_fclone_cache" or similar) on a debug session I've
  seen a panic like:

    Highbank #setenv bootargs console=ttyAMA0 root=/dev/sda2 kgdboc.kgdboc=ttyAMA0,115200 slub_debug=,kmalloc-4096 earlyprintk=ttyAMA0
    ...
    Unable to handle kernel NULL pointer dereference at virtual address 00000000
    pgd = c0004000
    [00000000] *pgd=00000000
    Internal error: Oops: 5 [#1] SMP ARM
    Modules linked in:
    CPU: 0 PID: 0 Comm: swapper Tainted: G        W    3.12.0-00048-gbe408cd #314
    task: c0898360 ti: c088a000 task.ti: c088a000
    PC is at strncmp+0x1c/0x84
    LR is at kmem_cache_flags.isra.46.part.47+0x44/0x60
    pc : [<c02c6da0>]    lr : [<c0110a3c>]    psr: 200001d3
    sp : c088bea8  ip : c088beb8  fp : c088beb4
    r10: 00000000  r9 : 413fc090  r8 : 00000001
    r7 : 00000000  r6 : c2984a08  r5 : c0966e78  r4 : 00000000
    r3 : 0000006b  r2 : 0000000c  r1 : 00000000  r0 : c2984a08
    Flags: nzCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
    Control: 10c5387d  Table: 0000404a  DAC: 00000015
    Process swapper (pid: 0, stack limit = 0xc088a248)
    Stack: (0xc088bea8 to 0xc088c000)
    bea0:                   c088bed4 c088beb8 c0110a3c c02c6d90 c0966e78 00000040
    bec0: ef001f00 00000040 c088bf14 c088bed8 c0112070 c0110a04 00000005 c010fac8
    bee0: c088bf5c c088bef0 c010fac8 ef001f00 00000040 00000000 00000040 00000001
    bf00: 413fc090 00000000 c088bf34 c088bf18 c0839190 c0112040 00000000 ef001f00
    bf20: 00000000 00000000 c088bf54 c088bf38 c0839200 c083914c 00000006 c0961c4c
    bf40: c0961c28 00000000 c088bf7c c088bf58 c08392ac c08391c0 c08a2ed8 c0966e78
    bf60: c086b874 c08a3f50 c0961c28 00000001 c088bfb4 c088bf80 c083b258 c0839248
    bf80: 2f800000 0f000000 c08935b4 ffffffff c08cd400 ffffffff c08cd400 c0868408
    bfa0: c29849c0 00000000 c088bff4 c088bfb8 c0824974 c083b1e4 ffffffff ffffffff
    bfc0: c08245c0 00000000 00000000 c0868408 00000000 10c5387d c0892bcc c0868404
    bfe0: c0899440 0000406a 00000000 c088bff8 00008074 c0824824 00000000 00000000
    [<c02c6da0>] (strncmp+0x1c/0x84) from [<c0110a3c>] (kmem_cache_flags.isra.46.part.47+0x44/0x60)
    [<c0110a3c>] (kmem_cache_flags.isra.46.part.47+0x44/0x60) from [<c0112070>] (__kmem_cache_create+0x3c/0x410)
    [<c0112070>] (__kmem_cache_create+0x3c/0x410) from [<c0839190>] (create_boot_cache+0x50/0x74)
    [<c0839190>] (create_boot_cache+0x50/0x74) from [<c0839200>] (create_kmalloc_cache+0x4c/0x88)
    [<c0839200>] (create_kmalloc_cache+0x4c/0x88) from [<c08392ac>] (create_kmalloc_caches+0x70/0x114)
    [<c08392ac>] (create_kmalloc_caches+0x70/0x114) from [<c083b258>] (kmem_cache_init+0x80/0xe0)
    [<c083b258>] (kmem_cache_init+0x80/0xe0) from [<c0824974>] (start_kernel+0x15c/0x318)
    [<c0824974>] (start_kernel+0x15c/0x318) from [<00008074>] (0x8074)
    Code: e3520000 01a00002 089da800 e5d03000 (e5d1c000)
    ---[ end trace 1b75b31a2719ed1d ]---
    Kernel panic - not syncing: Fatal exception

  Problem is that slub_debug option is not parsed before
  create_boot_cache is called. Solve this by changing slub_debug to
  early_param.

  Kernels 3.11, 3.10 are also affected.  I am not sure about older
  kernels.

Christoph Lameter explains:

  kmem_cache_flags may be called with NULL parameter during early boot.
  Skip the test in that case.

Cc: stable@vger.kernel.org # 3.10 and 3.11
Reported-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-11-11 18:15:45 +02:00
Roman Bobniev d56791b38e slub: proper kmemleak tracking if CONFIG_SLUB_DEBUG disabled
Move all kmemleak calls into hook functions, and make it so
that all hooks (both inside and outside of #ifdef CONFIG_SLUB_DEBUG)
call the appropriate kmemleak routines.  This allows for kmemleak
to be configured independently of slub debug features.

It also fixes a bug where kmemleak was only partially enabled in some
configurations.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Roman Bobniev <Roman.Bobniev@sonymobile.com>
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Signed-off-by: Pekka Enberg <penberg@iki.fi>
2013-10-24 20:25:10 +03:00
Xie XiuQi d175617436 mm: Fix some trivial typos in comments
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-18 14:49:53 +02:00
Linus Torvalds bff157b3ad Merge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
Pull SLAB update from Pekka Enberg:
 "Nothing terribly exciting here apart from Christoph's kmalloc
  unification patches that brings sl[aou]b implementations closer to
  each other"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slab: Use correct GFP_DMA constant
  slub: remove verify_mem_not_deleted()
  mm/sl[aou]b: Move kmallocXXX functions to common code
  mm, slab_common: add 'unlikely' to size check of kmalloc_slab()
  mm/slub.c: beautify code for removing redundancy 'break' statement.
  slub: Remove unnecessary page NULL check
  slub: don't use cpu partial pages on UP
  mm/slub: beautify code for 80 column limitation and tab alignment
  mm/slub: remove 'per_cpu' which is useless variable
2013-09-15 07:15:06 -04:00
Jingoo Han 3dbb95f789 mm: replace strict_strtoul() with kstrtoul()
The use of strict_strtoul() is not preferred, because strict_strtoul() is
obsolete.  Thus, kstrtoul() should be used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:57:11 -07:00
Christoph Lameter 76b6f3d255 slub: remove verify_mem_not_deleted()
I do not see any user for this code in the tree.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-09-04 20:53:16 +03:00
Christoph Lameter f1b6eb6e6b mm/sl[aou]b: Move kmallocXXX functions to common code
The kmalloc* functions of all slab allcoators are similar now so
lets move them into slab.h. This requires some function naming changes
in slob.

As a results of this patch there is a common set of functions for
all allocators. Also means that kmalloc_large() is now available
in general to perform large order allocations that go directly
via the page allocator. kmalloc_large() can be substituted if
kmalloc() throws warnings because of too large allocations.

kmalloc_large() has exactly the same semantics as kmalloc but
can only used for allocations > PAGE_SIZE.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-09-04 20:51:33 +03:00
Chen Gang 68f06650ea mm/slub.c: beautify code for removing redundancy 'break' statement.
Remove redundancy 'break' statement.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-08-13 09:21:46 +03:00
Libin ac6434e6b8 slub: Remove unnecessary page NULL check
In commit 4d7868e6(slub: Do not dereference NULL pointer in node_match)
had added check for page NULL in node_match.  Thus, it is not needed
to check it before node_match, remove it.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-08-13 09:21:46 +03:00
Linus Torvalds 370905069c Revert "slub: do not put a slab to cpu partial list when cpu_partial is 0"
This reverts commit 318df36e57.

This commit caused Steven Rostedt's hackbench runs to run out of memory
due to a leak.  As noted by Joonsoo Kim, it is buggy in the following
scenario:

 "I guess, you may set 0 to all kmem caches's cpu_partial via sysfs,
  doesn't it?

  In this case, memory leak is possible in following case.  Code flow of
  possible leak is follwing case.

   * in __slab_free()
   1. (!new.inuse || !prior) && !was_frozen
   2. !kmem_cache_debug && !prior
   3. new.frozen = 1
   4. after cmpxchg_double_slab, run the (!n) case with new.frozen=1
   5. with this patch, put_cpu_partial() doesn't do anything,
      because this cache's cpu_partial is 0
   6. return

  In step 5, leak occur"

And Steven does indeed have cpu_partial set to 0 due to RT testing.

Joonsoo is cooking up a patch, but everybody agrees that reverting this
for now is the right thing to do.

Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-08 09:06:37 -07:00
Chen Gang d0e0ac9772 mm/slub: beautify code for 80 column limitation and tab alignment
Be sure of 80 column limitation for both code and comments.

Correct tab alignment for 'if-else' statement.

Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2013-07-17 10:11:57 +03:00