Commit Graph

694 Commits

Author SHA1 Message Date
Linus Torvalds b419148e56 Linux 2.6.32-rc6 2009-11-03 11:37:49 -08:00
Linus Torvalds 012abeea66 Linux 2.6.32-rc5 2009-10-15 17:41:50 -07:00
Linus Torvalds 25d591587d Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: revert "save ARCH & CROSS_COMPILE ..."
  warn about use of uninstalled kernel headers
  kbuild: mkcompile_h: trivial cleanups
  kbuild: fix warning when domainname is not available
  kbuild: Fix size_append issue for bzip2/lzma kernel
  kbuild,scripts: use non-builtin echo for '-e'
  kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT set
2009-10-13 10:20:53 -07:00
Linus Torvalds 161291396e Linux 2.6.32-rc4 2009-10-11 14:43:56 -07:00
Sam Ravnborg 2331d1a6cd kbuild: revert "save ARCH & CROSS_COMPILE ..."
Revert commit 575543347b

It caused following issues:

- On architectures where ARCH= setting is used to select between
  32 and 64 bit this was no longer possible without "make mrproper"
- If ARCH was changed then kbuild refused to run "make mrproper"
  because ARCH had changed
- When CROSS_COMPILE was changed people were asked to run "make mrproper"
  but kbuild refused to run "make mrproper" because CROSS_COMPILE changed.
- Spaces in CROSS_COMPILE was not 'supported'
- If an non-existing ARCH= was used kbuild could get stuck

Lessons learned:
. Despite being simple and straghtforward people uses very different
  approaches when building the kernel.

. CROSS_COMPILE is sometimes used for ccache despite cache being
  only a CC frontend so one would have expected CC to be
  used for this purpose.

. And obviously this was not tested widely enough.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
2009-10-11 23:22:58 +02:00
Linus Torvalds 374576a8b6 Linux 2.6.32-rc3
I'm skipping -rc2 because the -rc1 Makefile mistakenly said -rc2, so in
order to avoid confusion, I'm jumping from -rc1 to -rc3.  That way, when
'uname' (or an oops report) says 2.6.32-rc2, there's no confusion about
whether people perhaps meant -rc1 or -rc2.
2009-10-04 17:12:30 -07:00
Linus Torvalds 17d857be64 Linux 2.6.32-rc1 2009-09-27 14:57:48 -07:00
Sam Ravnborg 51b563fc93 arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0
Albin Tonnerre <albin.tonnerre@free-electrons.com> reported:

    Bash 4 filters out variables which contain a dot in them.
    This happends to be the case of CPPFLAGS_vmlinux.lds.
    This is rather unfortunate, as it now causes
    build failures when using SHELL=/bin/bash to compile,
    or when bash happens to be used by make (eg when it's /bin/sh)

Remove the common definition of CPPFLAGS_vmlinux.lds by
pushing relevant stuff to either Makefile.build or the
arch specific kernel/Makefile where we build the linker script.

This is also nice cleanup as we move the information out where
it is used.

Notes for the different architectures touched:

arm - we use an already exported symbol
cris - we use a config symbol aleady available
       [Not build tested]
mips - the jiffies complexity has moved to vmlinux.lds.S where we need it.
       Added a few variables to CPPFLAGS - they are only used by
       the linker script.
       [Not build tested]
powerpc - removed assignment that is not needed
          [not build tested]
sparc - simplified it using $(BITS)
um - introduced a few new exported variables to deal with this
xtensa - added options to CPP invocation
         [not build tested]

Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:28:22 +02:00
Andi Kleen 8f7f5c9fc2 kbuild: set -fconserve-stack option for gcc 4.5
The upcomming gcc 4.5 has a new -fconserve-stack option that tells the
inliner to take stack frame size in account.  Set it if the compiler
supports it.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:44 +02:00
Andi Kleen d79a27195a kbuild: Check if linker supports the -X option
The new alternative `gold' linker in recent binutils doesn't support
the -X option. This breaks allyesconfig builds that have
CONFIG_STRIP_ASM_SYMS enabled. Check if the linker really supports
the option using ld-option.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:42 +02:00
Sam Ravnborg f86fd30660 kbuild: rename ld-option to cc-ldoption
ld-option is misnamed as it test options to gcc, not to ld.
Renamed it to reflect this.

Cc: Andi Kleen <andi@firstfloor.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:42 +02:00
Sam Ravnborg 575543347b kbuild: save ARCH & CROSS_COMPILE when building a kernel
When building a kernel for a different architecture
kbuild requires the user always to specify ARCH and
CROSS_COMPILE on the command-line.

We use the asm symlink to detect if user forgets to
specify the correct ARCH value - but that symlink
is about to die. And we do now want to loose this check.

This patch save the settings of ARCH and CROSS_COMPILE
in two files named:

    include/generated/kernel.arch
    include/generated/kernel.cross

The settings are saved during "make *config" time
and always read.

If user try to change the settings we error out.

This works both for plain builds and for O=...
builds.

So now you can do:
$ mkdir sparc64
$ make O=sparc64 ARCH=sparc64 CROSS_COMPILE=sparc64-linux- defconfig
$ cd sparc64
$ make

Notice that you no longer need to tell kbuild
the settings of ARCH and CROSS_COMPILE when you type make
in the output directory.

Likewise for plain builds where you do not use O=...

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roland McGrath <roland@redhat.com>
2009-09-20 12:24:55 +02:00
Sam Ravnborg caa27b66bd kbuild: use INSTALLKERNEL to select customized installkernel script
Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:

    make INSTALLKERNEL=arm-installkernel install

With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.

The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.

The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]

This patch undos what Ian did in commit:

  0f8e2d62fa
  ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")

The patch has been lightly tested on x86 only - but all changes
looks obvious.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:18:14 +02:00
Linus Torvalds ada3fa1505 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
  powerpc64: convert to dynamic percpu allocator
  sparc64: use embedding percpu first chunk allocator
  percpu: kill lpage first chunk allocator
  x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
  percpu: update embedding first chunk allocator to handle sparse units
  percpu: use group information to allocate vmap areas sparsely
  vmalloc: implement pcpu_get_vm_areas()
  vmalloc: separate out insert_vmalloc_vm()
  percpu: add chunk->base_addr
  percpu: add pcpu_unit_offsets[]
  percpu: introduce pcpu_alloc_info and pcpu_group_info
  percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
  percpu: add @align to pcpu_fc_alloc_fn_t
  percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
  percpu: drop @static_size from first chunk allocators
  percpu: generalize first chunk allocator selection
  percpu: build first chunk allocators selectively
  percpu: rename 4k first chunk allocator to page
  percpu: improve boot messages
  percpu: fix pcpu_reclaim() locking
  ...

Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-15 09:39:44 -07:00
Linus Torvalds 74fca6a428 Linux 2.6.31 2009-09-09 15:13:59 -07:00
Linus Torvalds e07cccf404 Linux 2.6.31-rc9 2009-09-05 16:38:12 -07:00
Linus Torvalds 326ba5010a Linux 2.6.31-rc8 2009-08-27 17:59:04 -07:00
Linus Torvalds 422bef879e Linux 2.6.31-rc7 2009-08-21 18:00:46 -07:00
Tejun Heo 384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Linus Torvalds 64f1607ffb Linux 2.6.31-rc6 2009-08-13 15:43:34 -07:00
Linus Torvalds ed680c4ad4 Linux 2.6.31-rc5 2009-07-31 17:40:45 -07:00
Linus Torvalds 4be3bd7849 Linux 2.6.31-rc4 2009-07-22 19:32:59 -07:00
Eugene Teo a3ca86aea5 Add '-fno-delete-null-pointer-checks' to gcc CFLAGS
Turning on this flag could prevent the compiler from optimising away
some "useless" checks for null pointers.  Such bugs can sometimes become
exploitable at compile time because of the -O2 optimisation.

See http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Optimize-Options.html

An example that clearly shows this 'problem' is commit 6bf67672.

 static void __devexit agnx_pci_remove(struct pci_dev *pdev)
 {
     struct ieee80211_hw *dev = pci_get_drvdata(pdev);
-    struct agnx_priv *priv = dev->priv;
+    struct agnx_priv *priv;
     AGNX_TRACE;

     if (!dev)
         return;
+    priv = dev->priv;

By reverting this patch, and compile it with and without
-fno-delete-null-pointer-checks flag, we can see that the check for dev
is compiled away.

    call    printk  #
-   testq   %r12, %r12  # dev
-   je  .L94    #,
    movq    %r12, %rdi  # dev,

Clearly the 'fix' is to stop using dev before it is tested, but building
with -fno-delete-null-pointer-checks flag at least makes it harder to
abuse.

Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: Wang Cong <amwang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-16 09:19:16 -07:00
Linus Torvalds 6847e154e3 Linux 2.6.31-rc3 2009-07-13 18:18:52 -07:00
Linus Torvalds a137802ee8 Don't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x
This causes kernel images that don't run init to completion with certain
broken gcc versions.

This fixes kernel bugzilla entry:
	http://bugzilla.kernel.org/show_bug.cgi?id=13012

I suspect the gcc problem is this:
	http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230

Fix the problem by using the -fno-strict-overflow flag instead, which
not only does not exist in the known-to-be-broken versions of gcc (it
was introduced later than fwrapv), but seems to be much less disturbing
to gcc too: the difference in the generated code by -fno-strict-overflow
are smaller (compared to using neither flag) than when using -fwrapv.

Reported-by: Barry K. Nathan <barryn@pobox.com>
Pushed-by: Frans Pop <elendil@planet.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 11:25:04 -07:00
Linus Torvalds 8e4a718ff3 Linux 2.6.31-rc2 2009-07-04 10:58:48 -07:00
Tejun Heo c43768cbb7 Merge branch 'master' into for-next
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h
2009-07-04 07:13:18 +09:00
Amerigo Wang 1129423539 kbuild: finally remove the obsolete variable $TOPDIR
TOPDIR is obsolete, it can be finally removed now.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-27 00:27:17 +02:00
Floris Kraak a8735821d1 Kbuild: Disable the -Wformat-security gcc flag
Some distributions have enabled the gcc flag -Wformat-security by default.
This results in a number of warnings about format arguments to functions,
sometimes in cases where fixing the warning is not likely to actually fix a
bug.  Instead of hand patching a dozens of places (possibly more) that produce
warnings that get ignored anyway we just turn off the flag in the Makefile.

Signed-off-by: Floris Kraak <randakar@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-27 00:15:27 +02:00
Linus Torvalds 28d0325ce6 Linux 2.6.31-rc1 2009-06-24 16:25:37 -07:00
Tejun Heo 405d967dc7 linker script: throw away .discard section
x86 throws away .discard section but no other archs do.  Also,
.discard is not thrown away while linking modules.  Make every arch
and module linking throw it away.  This will be used to define dummy
variables for percpu declarations and definitions.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: always throw away everything in .discard ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-24 15:13:38 +09:00
Peter Oberparleiter 2521f2c228 gcov: add gcov profiling infrastructure
Enable the use of GCC's coverage testing tool gcov [1] with the Linux
kernel.  gcov may be useful for:

 * debugging (has this code been reached at all?)
 * test improvement (how do I change my test to cover these lines?)
 * minimizing kernel configurations (do I need this option if the
   associated code is never run?)

The profiling patch incorporates the following changes:

 * change kbuild to include profiling flags
 * provide functions needed by profiling code
 * present profiling data as files in debugfs

Note that on some architectures, enabling gcc's profiling option
"-fprofile-arcs" for the entire kernel may trigger compile/link/
run-time problems, some of which are caused by toolchain bugs and
others which require adjustment of architecture code.

For this reason profiling the entire kernel is initially restricted
to those architectures for which it is known to work without changes.
This restriction can be lifted once an architecture has been tested
and found compatible with gcc's profiling. Profiling of single files
or directories is still available on all platforms (see config help
text).

[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:57 -07:00
Linus Torvalds 45e3e1935e Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (53 commits)
  .gitignore: ignore *.lzma files
  kbuild: add generic --set-str option to scripts/config
  kbuild: simplify argument loop in scripts/config
  kbuild: handle non-existing options in scripts/config
  kallsyms: generalize text region handling
  kallsyms: support kernel symbols in Blackfin on-chip memory
  documentation: make version fix
  kbuild: fix a compile warning
  gitignore: Add GNU GLOBAL files to top .gitignore
  kbuild: fix delay in setlocalversion on readonly source
  README: fix misleading pointer to the defconf directory
  vmlinux.lds.h update
  kernel-doc: cleanup perl script
  Improve vmlinux.lds.h support for arch specific linker scripts
  kbuild: fix headers_exports with boolean expression
  kbuild/headers_check: refine extern check
  kbuild: fix "Argument list too long" error for "make headers_check",
  ignore *.patch files
  Remove bashisms from scripts
  menu: fix embedded menu presentation
  ...
2009-06-14 14:12:18 -07:00
Linus Torvalds 07a2039b8e Linux 2.6.30 2009-06-09 20:05:27 -07:00
Cheng Renquan b8b0618cf6 kbuild: remove extra ifdef/endif of top Makefile
The GNU make's origin function know undefined variable well,
so the outer ifdef/endif conditional checking is unneeded.

From `info make` documentation, origin will return

  `undefined'
     if VARIABLE was never defined.
  `command line'
     if VARIABLE was defined on the command line.
   ...

Therefore, $(origin V) will get a value anyway, killing ifdef/endif is
viable and safe.

Furthermore, I've checked the minimal requirements from
Documentation/Changes is GNU make 3.79.1, and that version of GNU make
has support of origin function well already, so now it's safe to kill
the outer conditional checking, without upgrading the minimal
requirements.

Signed-off-by: Cheng Renquan <crq@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:45 +02:00
Mike Frysinger 08f67461c6 kbuild: fix detection of CONFIG_FRAME_WARN=0
The checking of CONFIG_FRAME_WARN in the top level Makefile forgot to
actually derefence the variable thus leading to an always true check.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04 18:07:40 -07:00
Linus Torvalds 9fa7eb283c Linux 2.6.30-rc8 2009-06-02 20:07:25 -07:00
Linus Torvalds 59a3759d0f Linux 2.6.30-rc7 2009-05-23 14:47:00 -07:00
Linus Torvalds 1406de8e11 Linux 2.6.30-rc6 2009-05-15 21:12:57 -07:00
Linus Torvalds 091bf7624d Linux 2.6.30-rc5 2009-05-08 17:14:14 -07:00
Robert P. J. Day c4d5ee67ce kbuild: "make prepare" should be "make modules_prepare"
Correct the Makefile help text to read "make modules_prepare".

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-05-01 10:54:01 +02:00
Frédéric Brière 0c56042adc kbuild: clean Module.markers and modules.order for out-of-tree modules
Signed-off-by: Frédéric Brière <fbriere@fbriere.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-05-01 10:54:01 +02:00
Linus Torvalds 091438dd56 Linux 2.6.30-rc4 2009-04-29 21:48:16 -07:00
Linus Torvalds 0910697403 Linux 2.6.30-rc3 2009-04-21 20:07:00 -07:00
Sam Ravnborg f14875a3e0 kbuild: support include/generated
We need a location for generated files.
Today they are spread over several places and bringing them
together to a common place makes it obvious hat is generated
and what isreal files.

Al Viro originally suggested: include/gen
Linus suggested to spell it out.

This patch implement support for

    include/generated

All files in include/generated are ignored by git.
include/generated is removed during "make mrproper".

With this we are ready to implement support for include/generated
in the various architctures and in the base kernel.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-19 11:12:06 +02:00
Linus Torvalds 0882e8dd3a Linux 2.6.30-rc2 2009-04-14 13:51:48 -07:00
Paul Mundt f499cae1e5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-04-14 06:29:07 +09:00
David Howells 5d7d18f5bc kbuild: make it possible for the linker to discard local symbols from vmlinux
Make it possible for the linker to discard local symbols from vmlinux as
they cause vmlinux to balloon when CONFIG_KALLSYMS=y and they cause
dump_stack() and get_wchan() to produce useless information under some
circumstances.

With this we add a config option (CONFIG_STRIP_ASM_SYMS) that will cause
the build to supply -X to the linker to tell it to strip temporary local
symbols.

This doesn't seem to cause gdb any problems.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:10 +02:00
Kirill Smelkov fe8d0a4108 kbuild: fix a few typos in top-level Makefile
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Dmitry Gryazin <gdu@mns.spb.ru>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:09 +02:00
Paul Mundt 3cc000b583 sh: Plug in support for ARCH=sh64 using sh SRCARCH.
This adds in support for building with ARCH=sh64 using the sh SRCARCH.
This tidies up the randconfig generation somewhat to make sure that we
don't end up with impossible configurations, and without having to rely
on things like KCONFIG_ALLCONFIG to detect the proper CPU support subset.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-11 08:39:27 +09:00
Linus Torvalds 577c9c456f Linux 2.6.30-rc1 2009-04-07 14:25:01 -07:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Linus Torvalds 8e0ee43bc2 Linux 2.6.29 2009-03-23 16:12:14 -07:00
Kyle McMartin 003086497f Build with -fno-dwarf2-cfi-asm
With a sufficiently new compiler and binutils, code which wasn't
previously generating .eh_frame sections has begun to.  Certain
architectures (powerpc, in this case) may generate unexpected relocation
formats in response to this, preventing modules from loading.

While the new relocation types should probably be handled, revert to the
previous behaviour with regards to generation of .eh_frame sections.

(This was reported against Fedora, which appears to be the only distro
doing any building against gcc-4.4 at present: RH bz#486545.)

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Alexandre Oliva <aoliva@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-23 14:21:26 -07:00
Linus Torvalds d0115552cd Move cc-option to below arch-specific setup
Sam Ravnborg says:
 "We have several architectures that plays strange games with $(CC) and
  $(CROSS_COMPILE).

  So we need to postpone any use of $(call cc-option..) until we have
  included the arch specific Makefile so we try with the correct $(CC)
  version."

Requested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-19 15:53:19 -07:00
Linus Torvalds 68df3755e3 Add '-fwrapv' to gcc CFLAGS
This makes sure that gcc doesn't try to optimize away wrapping
arithmetic, which the kernel occasionally uses for overflow testing, ie
things like

	if (ptr + offset < ptr)

which technically is undefined for non-unsigned types. See

	http://bugzilla.kernel.org/show_bug.cgi?id=12597

for details.

Not all versions of gcc support it, so we need to make it conditional
(it looks like it was introduced in gcc-3.4).

Reminded-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-19 11:10:17 -07:00
Linus Torvalds 041b62374c Linus 2.6.29-rc8 2009-03-12 19:39:28 -07:00
Gilles Espinasse 75bccd881a kbuild: remove unused -r option for module-init-tool depmod
Following a thread on busybox mailing list
depmod -r option is ignored by module-init-tools depmod
-r option break busybox depmod.

So the best solution look to remove -r from kernel Makefile

Signed-off-by: Gilles Espinasse <g.esp@free.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-07 13:57:25 +01:00
Josh Hunt b925dbfe3c kbuild: fix 'make rpm' when CONFIG_LOCALVERSION_AUTO=y and using SCM tree
Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source
tree under SCM.  This is due to KERNELRELEASE being different when the initial make
is run and when make is run from rpmbuild.

mkspec creates kernel.spec using KERNELRELEASE:

<mkspec>
echo "%files"
echo '%defattr (-, root, root)'
echo "%dir /lib/modules"
echo "/lib/modules/$KERNELRELEASE"
echo "/lib/firmware"
echo "/boot/*"
echo ""
</mkspec>

When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any
additional version info from SCM.  Next, the srctree is tarred up and SCM
information is excluded.

rpmbuild reruns make and in the process generates a new include/config/kernel.release
and thus a new KERNELRELEASE.  However this time the SCM information is gone so
KERNELRELEASE no longer has the additional version information.  When "make modules_install"
runs, it uses the new KERNELRELEASE value to determine where to install the modules.
This conflicts with where the spec file assumes they are going because of the
mis-matching KERNELRELEASE versions.

<snippet>
+ INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root
+ make -j16 modules_install
  INSTALL crypto/aead.ko
  INSTALL crypto/cbc.ko
  INSTALL crypto/chainiv.ko
  INSTALL crypto/crc32c.ko
  INSTALL crypto/crypto_algapi.ko
  INSTALL crypto/crypto_blkcipher.ko
  INSTALL crypto/crypto_hash.ko
  INSTALL crypto/cryptomgr.ko
  INSTALL crypto/ecb.ko
  INSTALL crypto/eseqiv.ko
  INSTALL crypto/krng.ko
  INSTALL crypto/md5.ko
  INSTALL crypto/pcbc.ko
  INSTALL crypto/rng.ko
  INSTALL drivers/block/cciss.ko
  INSTALL drivers/hid/hid-dummy.ko
  INSTALL drivers/scsi/iscsi_tcp.ko
  INSTALL drivers/scsi/libiscsi.ko
  INSTALL drivers/scsi/libiscsi_tcp.ko
  INSTALL drivers/scsi/scsi_transport_iscsi.ko
  INSTALL drivers/scsi/scsi_wait_scan.ko
  INSTALL fs/lockd/lockd.ko
  INSTALL fs/nfs/nfs.ko
  INSTALL fs/nfsd/nfsd.ko
  INSTALL lib/libcrc32c.ko
  INSTALL net/sunrpc/sunrpc.ko
  DEPMOD  2.6.29-rc4-tip
+ cp arch/x86/boot/bzImage
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422
+ cp System.map
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422
+ cp .config
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422
+ cp vmlinux vmlinux.orig
+ bzip2 -9 vmlinux
+ mv vmlinux.bz2
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2
+ mv vmlinux.orig vmlinux
+ /usr/lib/rpm/brp-compress
Processing files: kernel-2.6.29rc4tip01479g5d85422-2
error: File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422

RPM build errors:
    File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
make[1]: *** [rpm] Error 1
make: *** [rpm] Error 2
</snippet>

I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both
with and without CONFIG_LOCALVERSION_AUTO=y.

Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
----
2009-03-07 13:55:38 +01:00
Linus Torvalds fec6c6fec3 Linux 2.6.29-rc7 2009-03-03 17:05:22 -08:00
Ingo Molnar a852cbfaaf Merge branches 'x86/acpi', 'x86/apic', 'x86/asm', 'x86/cleanups', 'x86/mm', 'x86/signal' and 'x86/urgent'; commit 'v2.6.29-rc6' into x86/core 2009-02-24 21:50:43 +01:00
Linus Torvalds 20f4d6c3a2 Linux 2.6.29-rc6 2009-02-22 20:19:40 -08:00
Ingo Molnar fc6fc7f1b1 Merge branch 'linus' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic conflict resolution:
	arch/x86/kernel/setup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-22 20:05:19 +01:00
Ingo Molnar 3b6f7b9beb Merge branch 'x86/urgent' into x86/core 2009-02-20 17:40:43 +01:00
Ingo Molnar 494df596f9 Merge branches 'x86/acpi', 'x86/apic', 'x86/cpudetect', 'x86/headers', 'x86/paravirt', 'x86/urgent' and 'x86/xen'; commit 'v2.6.29-rc5' into x86/core 2009-02-17 12:07:00 +01:00
Andi Kleen 929799973b kbuild: create the source symlink earlier in the objdir
It's useful to already have the source symlink in a
objdir when one just runs make *config. Then one
can do

mkdir obj-allyes
cd obj-allyes
make -C ../sourcedir O=$(pwd) allyesconfig
./source/scripts/config --disable debug_info
make CC=icecc -j18

without having to interrupt the make first just to
get the source symlink.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
[sam: deleted the other source symlink statement]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-02-15 12:51:05 +01:00
Linus Torvalds d2f8d7ee1a Linux 2.6.29-rc5 2009-02-13 15:31:30 -08:00
Tejun Heo 5d707e9c8e stackprotector: update make rules
Impact: no default -fno-stack-protector if stackp is enabled, cleanup

Stackprotector make rules had the following problems.

* cc support test and warning are scattered across makefile and
  kernel/panic.c.

* -fno-stack-protector was always added regardless of configuration.

Update such that cc support test and warning are contained in makefile
and -fno-stack-protector is added iff stackp is turned off.  While at
it, prepare for 32bit support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-10 00:41:54 +01:00
Linus Torvalds 8e4921515c Linux 2.6.29-rc4 2009-02-08 12:37:27 -08:00
Linus Torvalds 18e352e4a7 Linux 2.6.29-rc3 2009-01-28 10:49:30 -08:00
Linus Torvalds 2034563ca3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: fix kbuild.txt typos
  kbuild: print usage with no arguments in scripts/config
  Revert "kbuild: strip generated symbols from *.ko"
2009-01-26 15:10:37 -08:00
Linus Torvalds ac3d266bf1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k,m68knommu: merge header files

Resolve trivial conflict in arch/m68knommu/include/asm/Kbuild
2009-01-26 10:33:01 -08:00
Linus Torvalds 1de9e8e70f Linux 2.6.29-rc2 2009-01-16 12:43:00 -08:00
Sam Ravnborg 49148020bc m68k,m68knommu: merge header files
Merge header files for m68k and m68knommu to the single location:

    arch/m68k/include/asm

The majority of this patch was the result of the
script that is included in the changelog below.

The script was originally written by Arnd Bergman and
exten by me to cover a few more files.

When the header files differed the script uses the following:

The original m68k file is named <file>_mm.h  [mm for memory manager]
The m68knommu file is named <file>_no.h [no for no memory manager]

The files uses the following include guard:

This include gaurd works as the m68knommu toolchain set
the __uClinux__ symbol - so this should work in userspace too.

Merging the header files for m68k and m68knommu exposes the
(unexpected?) ABI differences thus it is easier to actually
identify these and thus to fix them.

The commit has been build tested with both a m68k and
a m68knommu toolchain - with success.

The commit has also been tested with "make headers_check"
and this patch fixes make headers_check for m68knommu.

The script used:
TARGET=arch/m68k/include/asm
SOURCE=arch/m68knommu/include/asm

INCLUDE="cachectl.h errno.h fcntl.h hwtest.h ioctls.h ipcbuf.h \
linkage.h math-emu.h md.h mman.h movs.h msgbuf.h openprom.h \
oplib.h poll.h posix_types.h resource.h rtc.h sembuf.h shmbuf.h \
shm.h shmparam.h socket.h sockios.h spinlock.h statfs.h stat.h \
termbits.h termios.h tlb.h types.h user.h"

EQUAL="auxvec.h cputime.h device.h emergency-restart.h futex.h \
ioctl.h irq_regs.h kdebug.h local.h mutex.h percpu.h \
sections.h topology.h"

NOMUUFILES="anchor.h bootstd.h coldfire.h commproc.h dbg.h \
elia.h flat.h m5206sim.h m520xsim.h m523xsim.h m5249sim.h \
m5272sim.h m527xsim.h m528xsim.h m5307sim.h m532xsim.h \
m5407sim.h m68360_enet.h m68360.h m68360_pram.h m68360_quicc.h \
m68360_regs.h MC68328.h MC68332.h MC68EZ328.h MC68VZ328.h \
mcfcache.h mcfdma.h mcfmbus.h mcfne.h mcfpci.h mcfpit.h \
mcfsim.h mcfsmc.h mcftimer.h mcfuart.h mcfwdebug.h \
nettel.h quicc_simple.h smp.h"

FILES="atomic.h bitops.h bootinfo.h bug.h bugs.h byteorder.h cache.h \
cacheflush.h checksum.h current.h delay.h div64.h \
dma-mapping.h dma.h elf.h entry.h fb.h fpu.h hardirq.h hw_irq.h io.h \
irq.h kmap_types.h machdep.h mc146818rtc.h mmu.h mmu_context.h \
module.h page.h page_offset.h param.h pci.h pgalloc.h \
pgtable.h processor.h ptrace.h scatterlist.h segment.h \
setup.h sigcontext.h siginfo.h signal.h string.h system.h swab.h \
thread_info.h timex.h tlbflush.h traps.h uaccess.h ucontext.h \
unaligned.h unistd.h"

mergefile() {
	BASE=${1%.h}
	git mv ${SOURCE}/$1 ${TARGET}/${BASE}_no.h
	git mv ${TARGET}/$1 ${TARGET}/${BASE}_mm.h

cat << EOF > ${TARGET}/$1
EOF

	git add ${TARGET}/$1
}

set -e

mkdir -p ${TARGET}

git mv include/asm-m68k/* ${TARGET}
rmdir include/asm-m68k

git rm ${SOURCE}/Kbuild
for F in $INCLUDE $EQUAL; do
	git rm ${SOURCE}/$F
done

for F in $NOMUUFILES; do
	git mv ${SOURCE}/$F ${TARGET}/$F
done

for F in $FILES ; do
	mergefile $F
done

rmdir arch/m68knommu/include/asm
rmdir arch/m68knommu/include

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-01-16 21:58:10 +10:00
Sam Ravnborg 2ea038917b Revert "kbuild: strip generated symbols from *.ko"
This reverts commit ad7a953c52.

And commit: ("allow stripping of generated symbols under CONFIG_KALLSYMS_ALL")
            9bb482476c

These stripping patches has caused a set of issues:

1) People have reported compatibility issues with binutils due to
   lack of support for `--strip-unneeded-symbols' with objcopy 2.15.92.0.2
   Reported by: Wenji
2) ccache and distcc no longer works as expeced
   Reported by: Ted, Roland, + others
3) The installed modules increased a lot in size
   Reported by: Ted, Davej + others

Reported-by: Wenji Huang <wenji.huang@oracle.com>
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-01-14 21:38:20 +01:00
Linus Torvalds c59765042f Linux 2.6.29-rc1 2009-01-10 15:43:05 -08:00
Linus Torvalds c6906a2cb7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: fix typos (s/bin_shipped/bin.o_shipped/) in Documentation
  kbuild: add a symlink to the source for separate objdirs
  kconfig: add script to manipulate .config files on the command line
  kbuild: reintroduce ALLSOURCE_ARCHS support for tags/cscope
  bootchart: improve output based on Dave Jones' feedback
  fix modules_install via NFS
  qnx: include <linux/types.h> for definitions of __[us]{8,16,32,64} types
2009-01-07 13:11:28 -08:00
Andi Kleen 399b835be3 kbuild: add a symlink to the source for separate objdirs
I have some scripts which need to map back to the source directory
from an objdir. This was so far done by parsing the Makefile,
but the Makefile format changes occasionally and breaks my scripts
then.

To make this more reliable add a "source" symlink back.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-01-07 21:44:22 +01:00
Anisse Astier 5a9e67b1a1 trivial: chack -> check typo fix in main Makefile
Trivial one letter spelling in main Makefile

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06 11:32:22 +01:00
Hannes Eder 80a7d1d991 kbuild: disable sparse warning "returning void-valued expression"
The sparse warning -Wreturn-void ("returning void-valued expression")
is off by default, but it is enabled with -Wall, so add
-Wno-return-void to CHECKFLAGS to disable it.

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-01-02 20:43:24 +01:00
David S. Miller e3c6d4ee54 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	arch/sparc64/kernel/idprom.c
2008-12-28 20:19:47 -08:00
Linus Torvalds 96faec945f Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
  allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
  kbuild: strip generated symbols from *.ko
  kbuild: simplify use of genksyms
  kernel-doc: check for extra kernel-doc notations
  kbuild: add headerdep used to detect inclusion cycles in header files
  kbuild: fix string equality testing in tags.sh
  kbuild: fix make tags/cscope
  kbuild: fix make incompatibility
  kbuild: remove TAR_IGNORE
  setlocalversion: add git-svn support
  setlocalversion: print correct subversion revision
  scripts: improve the decodecode script
  scripts/package: allow custom options to rpm
  genksyms: allow to ignore symbol checksum changes
  genksyms: track symbol checksum changes
  tags and cscope support really belongs in a shell script
  kconfig: fix options to check-lxdialog.sh
  kbuild: gen_init_cpio expands shell variables in file names
  remove bashisms from scripts/extract-ikconfig
  kbuild: teach mkmakfile to be silent
  ...
2008-12-28 15:13:48 -08:00
Linus Torvalds 4a6908a3a0 Linux 2.6.28
Happy holidays..
2008-12-24 15:26:37 -08:00
Jan Beulich 9bb482476c allow stripping of generated symbols under CONFIG_KALLSYMS_ALL
Building upon parts of the module stripping patch, this patch
introduces similar stripping for vmlinux when CONFIG_KALLSYMS_ALL=y.
Using CONFIG_KALLSYMS_STRIP_GENERATED reduces the overhead of
CONFIG_KALLSYMS_ALL from 245k/310k to 65k/80k for the (i386/x86-64)
kernels I tested with.

The patch also does away with the need to special case the kallsyms-
internal symbols by making them available even in the first linking
stage.

While it is a generated file, the patch includes the changes to
scripts/genksyms/keywords.c_shipped, as I'm unsure what the procedure
here is.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-19 22:47:10 +01:00
Jan Beulich ad7a953c52 kbuild: strip generated symbols from *.ko
This patch changes the way __crc_ symbols are being resolved from
using ld to do so to using the assembler, thus allowing these symbols
to be marked local (the linker creates then as global ones) and hence
allow stripping (for modules) or ignoring (for vmlinux) them. While at
this, also strip other generated symbols during module installation.

One potentially debatable point is the handling of the flags passeed
to gcc when translating the intermediate assembly file into an object:
passing $(c_flags) unchanged doesn't work as gcc passes --gdwarf2 to
gas whenever is sees any -g* option, even for -g0, and despite the
fact that the compiler would have already produced all necessary debug
info in the C->assembly translation phase. I took the approach of just
filtering out all -g* options, but an alternative to such negative
filtering might be to have a positive filter which might, in the ideal
case allow just all the -Wa,* options to pass through.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-19 22:41:15 +01:00
Linus Torvalds 929096fe9f Linux 2.6.28-rc9 2008-12-18 17:20:13 -08:00
Vegard Nossum 179efcb47d kbuild: add headerdep used to detect inclusion cycles in header files
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-18 20:18:04 +01:00
Sam Ravnborg 31110ebbec kbuild: fix make incompatibility
"Paul Smith" <psmith@gnu.org> reported that we would fail
to build with a new check that may be enabled in an
upcoming version of make.

The error was:

      Makefile:442: *** mixed implicit and normal rules.  Stop.

The problem is that we did stuff like this:

config %config: ...

The solution was simple - the above was split into two with identical
prerequisites and commands.
With only three lines it was not worth to try to avoid the duplication.

Cc: "Paul Smith" <psmith@gnu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-13 23:00:45 +01:00
Linus Torvalds 8b1fae4e42 Linux 2.6.28-rc8 2008-12-10 15:11:51 -08:00
Sam Ravnborg 5e53879008 sparc,sparc64: unify Makefile
To unify Makefile for sparc and sparc64 a few other steps was needed:
1) separate defconfig files for sparc and sparc64 is required,
   so locate these in arch/sparc/configs
2) removoval of hack in toplevel Makefile to deal with that
   headers was in a separate directory compared to the rest

The unification of the Makefile required usage of several

    foo-$(CONFIG_SPARCnn) +=

due to a few directories pending unification.
This will be cleaned up when we unify the remaining directories.

Included in this patch are the deletion of a few files in
sparc64 as they are no longer needed: Makefile + Kconfig.
arch/sparc64/ will after this patch is applied only
have four directories (prom, lib, kernel, boot)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04 09:17:16 -08:00
Sam Ravnborg a680eedc6c tags and cscope support really belongs in a shell script
as they do not benefit from the make functionality.

Moving the support to a shell script has several benefits:
- The readability of the code has increased a lot
- More people is able to extend the tags support
- We see less changes to the top-level Makefile

The shell script version includes improvements from:
Alexey Dobriyan <adobriyan@gmail.com> (jump to kconfig symbols)
Alexey Dobriyan <adobriyan@gmail.com> (drop ./ in paths)
Ian Campbell <ijc@hellion.org.uk> (simplified find algorithms)

This version has a few caveats:
=> It does not support ALLSOURCE_ARCHS
   - it is easy to add if it is really used
=> It assumes all archs have moved to arch/$ARCH/include
   - until that happens we have a few additional hits in the archs

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
2008-12-03 22:24:13 +01:00
Mike Frysinger fd54f50284 kbuild: use KECHO convenience echo
Convert a few echos in the build system to new $(kecho) so we get correct
output according to build verbosity.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
[sam: added kecho in a few more places for O=... builds]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03 21:32:01 +01:00
Sam Ravnborg d8672b40d3 kbuild: expand -I in KBUILD_CPPFLAGS
kbuild failed to expand include flags in KBUILD_CPPFLAGS
resulting in code like this in arch Makefiles:

ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += -Iinclude/foo
else
KBUILD_CPPFLAGS += -I$(srctree)/include/foo
endif

Move use of LINUXINCLUDE into Makefile.lib to allow
us to expand -I directives of KBUILD_CPPFLAGS so
we can avoid the above code.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03 21:31:59 +01:00
Linus Torvalds 061e41fdb5 Linux 2.6.28-rc7 2008-12-01 19:59:23 -08:00
Linus Torvalds 13d428afc0 Linux 2.6.28-rc6 2008-11-20 15:19:22 -08:00
Linus Torvalds 9bf1a2445f Linux 2.6.28-rc5 2008-11-15 13:42:56 -08:00
Linus Torvalds f7160c7573 Linux 2.6.28-rc4 2008-11-09 16:36:15 -08:00
Linus Torvalds 45beca08dd Linux v2.6.28-rc3 2008-11-02 14:17:19 -08:00
Ian Campbell de2addf592 kbuild: do not include arch/<ARCH>/include/asm in find-sources twice.
Architectures which have moved their includes to arch/<ARCH>/include
now list the headers twice in the source listing used by "make
cscope" and friends, causing those tools to list symbols twice.

Skipping these files in the ALLSOURCE_ARCHS pass rather than removing
the ALLINCLUDE_ARCHS pass preserves the semantics of the later.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-29 22:27:17 +01:00
Sam Ravnborg dcc2da1a96 kbuild: improve check-symlink
o if include/asm point to a nonexisting directory remove the asm symlink
o if include/asm is a directory error out

This fixes a situation where one could be left with a symlink
to asm-x86 but that directory no longer exist and thus the build
would error out.

include/asm may be a directory if the kernel tree has been copied

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-29 22:02:07 +01:00
Ingo Molnar 4944dd62de Merge commit 'v2.6.28-rc2' into tracing/urgent 2008-10-27 10:50:54 +01:00
Linus Torvalds 0173a3265b Linux 2.6.28-rc2
.. fix all the worst problems in -rc1
2008-10-26 12:13:29 -07:00
Linus Torvalds 57f8f7b60d Linux 2.6.28-rc1 2008-10-23 20:06:52 -07:00
Al Viro 61bee20445 x86, um: get rid of arch/um/Kconfig.arch
Teach scripts/kconfig/Makefile and top-level Makefile that arch/*/Makefile
is allowed to say Kconfig := <whatever I want instead of arch/blah/Kconfig>.
Rewrite arch/um/Kconfig and arch/um/Kconfig.<subarch> so that the latter
would be top-level one (and include the pieces of the former).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-22 22:55:23 -07:00
Steven Rostedt 606576ce81 ftrace: rename FTRACE to FUNCTION_TRACER
Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER.  The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.

This patch was generated mostly by script, and partially by hand.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 18:27:03 +02:00
Linus Torvalds 3fa8749e58 Linux 2.6.27 2008-10-09 15:13:53 -07:00
Linus Torvalds 4330ed8ed4 Linux 2.6.27-rc9 2008-10-06 16:39:58 -07:00
Linus Torvalds 94aca1dac6 Linux 2.6.27-rc8 2008-09-29 15:24:02 -07:00
Linus Torvalds 72d31053f6 Linux 2.6.27-rc7 2008-09-21 15:29:55 -07:00
Linus Torvalds adee14b2e1 Linux 2.6.27-rc6 2008-09-09 16:27:49 -07:00
Linus Torvalds 24342c34a0 Linux 2.6.27-rc5 2008-08-28 15:52:02 -07:00
Linus Torvalds 6a55617ed5 Linux v2.6.27-rc4 2008-08-20 19:35:56 -07:00
Linus Torvalds 30a2f3c60a Linux 2.6.27-rc3 2008-08-12 18:55:39 -07:00
Randy Dunlap 3794f3e812 docsrc: build Documentation/ sources
Currently source files in the Documentation/ sub-dir can easily bit-rot
since they are not generally buildable, either because they are hidden in
text files or because there are no Makefile rules for them.  This needs to
be fixed so that the source files remain usable and good examples of code
instead of bad examples.

Add the ability to build source files that are in the Documentation/ dir.
Add to Kconfig as "BUILD_DOCSRC" config symbol.

Use "CONFIG_BUILD_DOCSRC=1 make ..." to build objects from the
Documentation/ sources.  Or enable BUILD_DOCSRC in the *config system.
However, this symbol depends on HEADERS_CHECK since the header files need
to be installed (for userspace builds).

Built (using cross-tools) for x86-64, i386, alpha, ia64, sparc32,
sparc64, powerpc, sh, m68k, & mips.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-12 16:07:30 -07:00
Denis ChengRq 64a99d2a8c kbuild: a better way to generate cscope database change
It's a problem about cscope target of kernel Makefile, and the cscope
plugin of emacs:
1. `make cscope` will generate cscope.files cscope.{in,po,}.out;
2. the cscope plugin expect a cscope.out.{in,po,};
3. the default `cscope -b` would generate cscope.{in,po,}.out;

There are three approach to solve it:
1. modify the cscope C code;
2. modify the cscope emacs plugin lisp code;
3. modify the Makefile;

I have tried to communicate with the cscope upstream, but later I
realize the third approach is most meaningful.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-08-06 22:17:06 +02:00
Sam Ravnborg 7a48bdd01b kbuild: fix O=.. build with arm
With a make O=... build kbuild would only create
the include2/asm symlink for archs that not yet
had moved headers to include/$ARCH/include

There is no longer any reason to avoid the symlink
for archs that has moved their headers so create it
unconditionally.

This fixes arm because kbuild checked for include/asm-$ARCH/errno.h
and that file was not present for arm but the platform files
are not yet moved.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Russell King <rmk@arm.linux.org.uk>
2008-08-06 21:56:53 +02:00
Linus Torvalds 0967d61ea0 Linux 2.6.27-rc2 2008-08-05 21:49:54 -07:00
Sam Ravnborg ea35455e0d kbuild: fix O=... build of um
We used include/asm-$ARCH/system.h to check if
we should create a symlink in include2 directory with
make O=... builds.
But um does not have such a file thus build filed.

Let's try anohter filename:
$ ls -d include/asm-* | wc -l
21
$ ls -d include/asm-*/errno.h | wc -l
21

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
2008-07-30 22:21:20 +02:00
Linus Torvalds 6e86841d05 Linux 2.6.27-rc1 2008-07-28 19:40:31 -07:00
Sam Ravnborg a439fe51a1 sparc, sparc64: use arch/sparc/include
The majority of this patch was created by the following script:

***
ASM=arch/sparc/include/asm
mkdir -p $ASM
git mv include/asm-sparc64/ftrace.h $ASM
git rm include/asm-sparc64/*
git mv include/asm-sparc/* $ASM
sed -ie 's/asm-sparc64/asm/g' $ASM/*
sed -ie 's/asm-sparc/asm/g' $ASM/*
***

The rest was an update of the top-level Makefile to use sparc
for header files when sparc64 is being build.
And a small fixlet to pick up the correct unistd.h from
sparc64 code.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-27 23:00:59 +02:00
Linus Torvalds 6948385cbd Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits)
  setlocalversion: do not describe if there is nothing to describe
  kconfig: fix typos: "Suport" -> "Support"
  kconfig: make defconfig is no longer chatty
  kconfig: make oldconfig is now less chatty
  kconfig: speed up all*config + randconfig
  kconfig: set all new symbols automatically
  kconfig: add diffconfig utility
  kbuild: remove Module.markers during mrproper
  kbuild: sparse needs CF not CHECKFLAGS
  kernel-doc: handle/strip __init
  vmlinux.lds: move __attribute__((__cold__)) functions back into final .text section
  init: fix URL of "The GNU Accounting Utilities"
  kbuild: add arch/$ARCH/include to search path
  kbuild: asm symlink support for arch/$ARCH/include
  kbuild: support arch/$ARCH/include for tags, cscope
  kbuild: prepare headers_* for arch/$ARCH/include
  kbuild: install all headers when arch is changed
  kbuild: make clean removes *.o.* as well
  kbuild: optimize headers_* targets
  kbuild: only one call for include/ in make headers_*
  ...
2008-07-27 09:59:59 -07:00
Alexey Dobriyan c28ca3aaa1 kbuild: remove Module.markers during mrproper
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:40 +02:00
Sam Ravnborg 5e4786f75d kbuild: add arch/$ARCH/include to search path
This patch conclude the support for

   arch/$ARCH/include

Note: The individual architectures will most likely require
      a few minor patches to support locating header files in
      arch/$ARCH/include

Testing shows that it worked out-of-the-box for sparc.
x86 required a few trivial changes in the arch
specific Makefile and a few include paths had to be adjusted.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:35 +02:00
Sam Ravnborg 2e57d05116 kbuild: asm symlink support for arch/$ARCH/include
Adjust the asm symlink support so we do not create the
symlink unless really needed.
We check the precense of include/asm-$ARCH by checking
for the system.h file. We may end up with a stale directory
so it is not enough to check if the directory is present.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:34 +02:00
Sam Ravnborg a53ce098a7 kbuild: support arch/$ARCH/include for tags, cscope
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:33 +02:00
Sam Ravnborg 2fb9b1bd9d kbuild: prepare headers_* for arch/$ARCH/include
Factor out the headers_*_all support to a seperate
shell script and add support for arch specific
header files can be located in either

    arch/$ARCH/include/asm
or
    include/asm-$ARCH/

In "make help" always display the headers_* targets.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:12:33 +02:00
Alexey Dobriyan 6b36ab27d7 kbuild: make clean removes *.o.* as well
Those are left presumably from aborted ccache(1) compilations:

	arch/x86/kernel/.tmp_io_apic_64.o.T5veul
	arch/x86/kvm/.tmp_x86.o.SZWn69
	arch/x86/mm/.tmp_pgtable.o.sL1LTf
	drivers/ieee1394/.tmp_ieee1394_transactions.o.bUj6o1
	drivers/infiniband/hw/mlx4/.tmp_main.o.vy0ep6

BTW, with git there is nice way to check for such nuisainces:

	make mrproper
	git-ls-files -o

should give empty output.

More precise wildcard spec from: Jan Engelhardt <jengelh@medozas.de>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jan Engelhardt <jengelh@medozas.de>
2008-07-25 22:12:17 +02:00
Sam Ravnborg 88181ec30f kbuild: only one call for include/ in make headers_*
Move it to the top-level file to decide if we install/check
the generic headers or the arch specific headers.

This revealed a long standing bug where "make headers_check_all"
relied on the files in asm/ for the current architecture.
So make headers_check_all is now broken by this commit.

In addition:

o add a simpler way to detect if an arch support
  exporting header files.

o add 'set -e;' so we error out early if
  make headers_check_all fails.

o add sparc64 and cris to arch we do not process
  in make headers_*_all because:

    sparc64 - use sparc to export headers
    cris    - is know seriously broken

Includes suggestions from: David Woodhouse
<dwmw2@infradead.org>.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
2008-07-25 22:11:44 +02:00
Sam Ravnborg f6ecd4c84a kbuild: error out early in make headers_install
Fix the a.out.h case by setting SRCARCH and error
out early in case of an error.
The a.out.h case failed with the *_all targets.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-25 22:08:41 +02:00
Sam Ravnborg e6883b1879 kbuild: refactor headers_* targets in Makefile
o Use lower case for local variables
o Add a helper target for common targets
o Use $(hdr-inst)= ... to make Make invocations simpler
o Add -rR to make invocations

In total this adds more lines than it removes but the
benefit is better readability

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
2008-07-25 22:08:37 +02:00
David Woodhouse 44463f7dd6 firmware: create firmware binaries during 'make modules'.
This means that we no longer need write access to the source tree while
doing 'make modules_install'.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-25 14:26:30 -04:00
Mathieu Desnoyers d35cb360c2 markers: fix duplicate modpost entry
When a kernel was rebuilt, the previous Module.markers was not cleared.
It caused markers with different format strings to appear as duplicates
when a markers was changed.  This problem is present since
scripts/mod/modpost.c started to generate Module.markers, commit
b2e3e658b3

It therefore applies to 2.6.25, 2.6.26 and linux-next.

I merely merged the patches from Roland, Wenji and Takashi here.

Credits to
Roland McGrath <roland@redhat.com>
Wenji Huang <wenji.huang@oracle.com>
and
Takashi Nishiie <t-nishiie@np.css.fujitsu.com>

for providing the individual fixes.

- Changelog :
  - Integrated Takashi's Makefile modification to clear Module.markers upon
    make clean.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Roland McGrath <roland@redhat.com>
Cc: Wenji Huang <wenji.huang@oracle.com>
Cc: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 09:59:41 -07:00
Grant Likely 7023cc6129 Fix collateral damage to top level Makefile
The patch named "powerpc/mpc5121: Add clock driver", also contained
an unrelated and bogus change to the top-level makefile.  This patch
backs out the bad bit.

SHA1 of offending patch: 137e95906e)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Repented-by: John Rigby <jrigby@freescale.com>
[ Heh. Normally I pick these out from the diffstats, but I guess
  I've grown to trust the ppc tree too much ;)   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-17 09:05:12 -07:00
Ralf Baechle bef5b54bd7 Fix MIPS cross-compile problem
Crosscompiling on a Fedora 9 machine running gcc 4.3.0 as its host compiler
and gcc 3.4.6 for the mips-linux target results in the following build
error:

$ make malta_defconfig
$ make
cc1: error: unrecognized command line option "-fno-stack-protector"
scripts/kconfig/conf -s arch/mips/Kconfig
cc1: error: unrecognized command line option "-fno-stack-protector"

The arch Makefile is included too late so the host compiler is feature
tested, not the crosscompiler as intended and thus the Makefile applies
adds -fno-stack-protector to crosscompiler's flags which fails for gcc
3.4.6.  The bug was introduced by e06b8b98da
in 2.6.25; 35bb5b1e0e did add more flags
testing before the arch Makefile inclusion.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-16 11:42:32 -07:00
Benjamin Herrenschmidt 84c3d4aaec Merge commit 'origin/master'
Manual merge of:

	arch/powerpc/Kconfig
	arch/powerpc/kernel/stacktrace.c
	arch/powerpc/mm/slice.c
	arch/ppc/kernel/smp.c
2008-07-16 11:07:59 +10:00
Benjamin Herrenschmidt 43d2548bb2 Merge commit '85082fd7cbe3173198aac0eb5e85ab1edcc6352c' into test-build
Manual fixup of:

	arch/powerpc/Kconfig
2008-07-15 15:44:51 +10:00
Benjamin Herrenschmidt 5b0504c0d7 Merge commit 'gcl/gcl-next' 2008-07-15 11:55:27 +10:00
Linus Torvalds 5a86102248 Merge branch 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6
* 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6: (64 commits)
  firmware: convert sb16_csp driver to use firmware loader exclusively
  dsp56k: use request_firmware
  edgeport-ti: use request_firmware()
  edgeport: use request_firmware()
  vicam: use request_firmware()
  dabusb: use request_firmware()
  cpia2: use request_firmware()
  ip2: use request_firmware()
  firmware: convert Ambassador ATM driver to request_firmware()
  whiteheat: use request_firmware()
  ti_usb_3410_5052: use request_firmware()
  emi62: use request_firmware()
  emi26: use request_firmware()
  keyspan_pda: use request_firmware()
  keyspan: use request_firmware()
  ttusb-budget: use request_firmware()
  kaweth: use request_firmware()
  smctr: use request_firmware()
  firmware: convert ymfpci driver to use firmware loader exclusively
  firmware: convert maestro3 driver to use firmware loader exclusively
  ...

Fix up trivial conflicts with BKL removal in drivers/char/dsp56k.c and
drivers/char/ip2/ip2main.c manually.
2008-07-14 16:54:07 -07:00
David Woodhouse 751851af7a Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Conflicts:

	sound/pci/Kconfig
2008-07-14 15:51:11 -07:00
Ingo Molnar 5806b81ac1 Merge branch 'auto-ftrace-next' into tracing/for-linus
Conflicts:

	arch/x86/kernel/entry_32.S
	arch/x86/kernel/process_32.c
	arch/x86/kernel/process_64.c
	arch/x86/lib/Makefile
	include/asm-x86/irqflags.h
	kernel/Makefile
	kernel/sched.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-14 16:11:52 +02:00
Linus Torvalds bce7f793da Linux 2.6.26 2008-07-13 14:51:29 -07:00
John Rigby 137e95906e powerpc/mpc5121: Add clock driver
Plugs into the generic powerpc clock driver in
arch/powerpc/kernel/clock.c

The following subset of clk_interface is implemented:
    clk_get, clk_put:  get clock via name, release clock
    clk_enable, clk_disable:  enable or disable clock
    clk_get_rate:  get clock rate in Hz
    clk_set_rate:  stubbed
    clk_round_rate:  stubbed
    clk_set_parent: NULL
    clk_get_parent: NULL

Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-12 12:10:54 -06:00
David Woodhouse 88ecf814c4 firmware: Add firmware installation to modules_install, add firmware_install
For 'make modules_install', install any firmware required by
the modules which are being installed.

Also add a 'make firmware_install' target which doesn't depend on the
configuration, but installs _all_ available in-kernel-tree firmware into
$(INSTALL_FW_PATH), which defaults to /lib/firmware. This is intended
for distributors to make arch-independent (and config-independent)
packages containing firmware.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-10 14:47:34 +01:00
David Woodhouse 4d2acfbfdf firmware: Add CONFIG_EXTRA_FIRMWARE option
This allows arbitrary firmware files to be included in the static kernel
where the firmware loader can find them without requiring userspace to
be alive.

(Updated and CONFIG_EXTRA_FIRMWARE_DIR added with lots of help from
Johannes Berg).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2008-07-10 14:30:39 +01:00
Ingo Molnar bac0c9103b Merge branch 'tracing/ftrace' into auto-ftrace-next 2008-07-10 11:43:00 +02:00
Linus Torvalds b7279469d6 Linux 2.6.26-rc9 2008-07-05 15:53:22 -07:00
Ingo Molnar 97e6722b8d Merge branch 'linus' into tracing/ftrace 2008-06-25 12:27:56 +02:00
Linus Torvalds 543cf4cb3f Linux 2.6.26-rc8 2008-06-24 18:58:20 -07:00
Ingo Molnar f34bfb1bee Merge branch 'linus' into tracing/ftrace 2008-06-23 11:11:42 +02:00
Linus Torvalds d70ac829b7 Linux 2.6.26-rc7 2008-06-20 16:19:44 -07:00
Ingo Molnar e765ee90da Merge branch 'linus' into tracing/ftrace 2008-06-16 11:15:58 +02:00
Linus Torvalds 5dd34572ad Linux 2.6.26-rc6
.. and a new name, courtesy of Alan.
2008-06-12 14:22:24 -07:00
Linus Torvalds 53c8ba9540 Linux 2.6.26-rc5 2008-06-04 20:10:44 -07:00
Linus Torvalds e490517a03 Linux 2.6.26-rc4 2008-05-26 11:08:11 -07:00
Arnaldo Carvalho de Melo 16444a8a40 ftrace: add basic support for gcc profiler instrumentation
If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
set to a non-zero value the ftrace routine will be called everytime
we enter a kernel function that is not marked with the "notrace"
attribute.

The ftrace routine will then call a registered function if a function
happens to be registered.

[ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
  so don't blame Arnaldo for all of this ;-) ]

Update:
  It is now possible to register more than one ftrace function.
  If only one ftrace function is registered, that will be the
  function that ftrace calls directly. If more than one function
  is registered, then ftrace will call a function that will loop
  through the functions to call.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 20:31:58 +02:00
Linus Torvalds 1bf9947722 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  Don't clean bounds.h and asm-offsets.h
  kconfig: incorrect 'len' field initialisation ?
  kernel-doc: allow unnamed bit-fields
  kbuild: filter away debug symbols from kernel symbols
  Remove *.rej pattern from .gitignore
  MAINTAINERS: document names of new kbuild trees
  kbuild: disable modpost warnings for linkonce sections
  kbuild: escape meta characters in regular expression in make TAGS
2008-05-19 11:32:21 -07:00
Jan Blunck 7d3cc8b6d8 Don't clean bounds.h and asm-offsets.h
Since 97965478a6 ("mm: Get rid of __ZONE_COUNT")
mmzone.h includes bounds.h.
Calling make clean after make prepare removes bounds.h
again so when building external modules this fails.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
--
2008-05-19 20:18:24 +02:00
Linus Torvalds b8291ad07a Linux 2.6.26-rc3 2008-05-18 14:36:41 -07:00
Linus Torvalds 492c2e476e Linux 2.6.26-rc2 2008-05-11 17:09:41 -07:00
Masatake YAMATO a95bcfac2b kbuild: escape meta characters in regular expression in make TAGS
Alexey Dobriyan <adobriyan@gmail.com> introduced a code adds
menuconfig SOMETHING in Kconfig to tags output when you did "make tags".

See http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=80ff26241623875636674a31c0540a78c0fb5433

"make tags" may work fine with his code. However make TAGS doesn't work well
because etags command requires backslashes to escape meta characters like
`(', `)' and `|'.

Here is a patch.

Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-11 10:10:48 +02:00
Linus Torvalds 2ddcca36c8 Linux 2.6.26-rc1 2008-05-03 11:59:44 -07:00
Sam Ravnborg 90ebd878a5 kbuild: fix vmlinux.o link
We always linked vmliux.o.
Remove init/built-in.o dependency so we avoid this

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-01 19:31:35 +02:00
Andres Salomon 01dee1881d kbuild: fix help output to show correct arch
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28 22:46:11 +02:00
Segher Boessenkool 5dffbe811b kbuild: show defconfig subdirs in make help
PowerPC will start moving board defconfigs into subarch-specific
subdirs soon.  "make help" currently does not look in subdirs to
find the defconfigs to show.  This is partially a good thing,
since there are way too many defconfigs for one list.

This patch makes the main "make help" display something like

  help-40x         - Show 40x-specific targets
  help-44x         - Show 44x-specific targets
  help-boards      - Show all of the above

and wires up stuff so those new help-* commands actually work.

[sam: fixed it up to display x86 defconfigs too]
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28 22:40:14 +02:00
Uwe Kleine-König 0254da07d9 kbuild: fix depmod comment
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: trivial@kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-25 20:49:40 +02:00
Andi Kleen 35bb5b1e0e Add option to enable -Wframe-larger-than= on gcc 4.4
Add option to enable -Wframe-larger-than= on gcc 4.4

gcc mainline (upcoming 4.4) added a new -Wframe-larger-than=...
option to warn at build time about too large stack frames. Add a config
option to enable this warning, since this very useful for the kernel.

I choose (somewhat arbitarily) 2048 as default warning threshold for 64bit
and 1024 as default for 32bit architectures.  With some research and
fixing all the code for smaller values these defaults should be probably
lowered.

With the default allyesconfigs have some new warnings, but I think
that is all code that should be just fixed.

At some point (when gcc 4.4 is released and widely used) this should
obsolete make checkstack

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-25 20:23:47 +02:00
Alexey Dobriyan 80ff262416 kbuild: add kconfig symbols to tags output
Steps to reproduce:

	vi -t NETFILTER

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-25 20:20:42 +02:00
Sebastian Siewior f764e51421 Remove -numa from EXTRAVERSION
This snuck in through 919ee677b6
("[SPARC64]: Add NUMA support")

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24 12:38:04 -07:00
David S. Miller 919ee677b6 [SPARC64]: Add NUMA support.
Currently there is only code to parse NUMA attributes on
sun4v/niagara systems, but later on we will add such parsing
for older systems.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 23:32:17 -07:00
Uwe Kleine-Knig bc3c26fe65 fix typo "is" -> "if" in Makefile
It should be "if" but is written as "is"..

Signed-off-by: Uwe Kleine-Koenig <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21 22:53:56 +00:00
Linus Torvalds 4b119e21d0 Linux 2.6.25 2008-04-16 19:49:44 -07:00
Linus Torvalds 120dd64cac Linux 2.6.25-rc9 2008-04-11 13:32:29 -07:00
Linus Torvalds 0e81a8ae37 Linux 2.6.25-rc8 2008-04-01 12:44:26 -07:00
Linus Torvalds 05dda977f2 Linux 2.6.25-rc7 2008-03-25 18:38:14 -07:00
Sam Ravnborg 4ce6efed48 kbuild: soften modpost checks when doing cross builds
The module alias support in the kernel have a consistency
check where it is checked that the size of a structure
in the kernel and on the build host are the same.
For cross builds this check does not make sense so detect
when we do cross builds and silently skip the check in these
situations.
This fixes a build bug for a wireless driver when cross building
for arm.

Acked-by: Michael Buesch <mb@bu3sch.de>
Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@kernel.org
2008-03-23 21:38:54 +01:00
Linus Torvalds a978b30af3 Linux 2.6.25-rc6 2008-03-16 16:32:14 -07:00
Linus Torvalds cdeeeae056 Linux 2.6.25-rc5 2008-03-09 22:22:27 -07:00
Linus Torvalds 29e8c3c304 Linux 2.6.25-rc4 2008-03-04 20:33:54 -08:00
Linus Torvalds bfa274e243 Linux 2.6.25-rc3 2008-02-24 13:25:54 -08:00
Linus Torvalds 230b548c15 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: explain why DEBUG_SECTION_MISMATCH is UNDEFINED
  kbuild: fix building vmlinux.o
  kbuild: allow -fstack-protector to take effect
  kconfig: fix select in combination with default
2008-02-18 15:41:05 -08:00
Linus Torvalds 101142c37b Linux 2.6.25-rc2 2008-02-15 12:57:20 -08:00
Sam Ravnborg cf87dcd140 kbuild: fix building vmlinux.o
Ingo Molnar wrote:
>
> i've got a build log from a weird build error below:
>
>   LD      init/built-in.o
> distcc[12023] ERROR: compile (null) on localhost failed
> make: *** [vmlinux.o] Error 1
> make: *** Waiting for unfinished jobs....
>   LD      .tmp_vmlinux1
>

Building vmlinux.o were moved up in the dependency chain so we started
to build it before the kallsym stuff. This was done to let modpost
report section mismatch bugs even when the final link failed.

Originally I had expected the dependency of $(kallsyms.o) to
cover this but it turns out that we need to be even more explicit.
Fix this by adding a conditional dependency on firat target
used in the kallsyms serie of builds.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
2008-02-14 23:33:25 +01:00
Sam Ravnborg e06b8b98da kbuild: allow -fstack-protector to take effect
Arjan van de Ven <arjan@infradead.org> wrote:
===
I just read the excellent LWN writeup of the vmsplice
security thing, and that got me wondering why this attack
wasn't stopped by the CONFIG_CC_STACKPROTECTOR option...
because it plain should have been...

Some analysis later.. it turns out that the following line
in the top level Makefile, added by you in October 2007,
entirely disables CONFIG_CC_STACKPROTECTOR ;(
With this line removed the exploit will be nicely stopped.

CFLAGS          += $(call cc-option, -fno-stack-protector)

Now I realize that certain distros have patched gcc to
compensate for their lack of distro wide CFLAGS, and it's
great to work around that... but would there be a way to NOT
disable this for CONFIG_CC_STACKPROTECTOR please?
It would have made this exploit not possible for those kernels
that enable this feature (and that includes distros like Fedora)
===

Move the assignment to KBUILD_CFLAGS up before including
the arch specific Makefile so arch makefiles may override
the setting.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: stable@kernel.org
2008-02-14 23:33:21 +01:00
Linus Torvalds 19af35546d Linux 2.6.25-rc1
.. and I really need to call it something else.  Maybe it is time to
bring back the weasel series, since weasels always make me feel good
about a kernel.
2008-02-10 14:18:14 -08:00
Robert P. J. Day e1b8513d21 Typoes: "whith" -> "with"
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:14:02 +02:00
Sam Ravnborg 310f8243a6 kbuild: link vmlinux.o before kallsyms passes
link vmlinux.o so we may report section mismatch bugs before
we start with the real link - that may error out.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Sam Ravnborg 91341d4b2c kbuild: introduce new option to enhance section mismatch analysis
Setting the option DEBUG_SECTION_MISMATCH will
report additional section mismatch'es but this
should in the end makes it possible to get rid of
all of them.

See help text in lib/Kconfig.debug for details.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Valdis.Kletnieks@vt.edu 243f40cecb kbuild: document 'make prepare' in 'make help'
The output of 'make help' covers a lot of options, but doesn't include
a listing for 'make prepare'.  Here's a one-liner to fix that...

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:38 +01:00
Uwe Kleine-König 2c81210a26 kbuild: ignore cache modifiers for generating the tags files
With this patch I'm able to find the definition of _xmit_lock defined in
include/linux/netdevice.h as follows:

	struct net_device {
		...
		spinlock_t _xmit_lock ____cacheline_aligned_in_smp;
	}

Otherwise this counts as definition of ____cacheline_aligned_in_smp.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:38 +01:00
Robert P. J. Day 899c38420c Kbuild: Clarify the rpm-related make packaging targets
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:36 +01:00
Tejun Heo 551559e13a kbuild: implement modules.order
When multiple built-in modules (especially drivers) provide the same
capability, they're prioritized by link order specified by the order
listed in Makefile.  This implicit ordering is lost for loadable
modules.

When driver modules are loaded by udev, what comes first in
modules.alias file is selected.  However, the order in this file is
indeterministic (depends on filesystem listing order of installed
modules).  This causes confusion.

The solution is two-parted.  This patch updates kbuild such that it
generates and installs modules.order which contains the name of
modules ordered according to Makefile.  The second part is update to
depmod such that it generates output files according to this file.

Note that both obj-y and obj-m subdirs can contain modules and
ordering information between those two are lost from beginning.
Currently obj-y subdirs are put before obj-m subdirs.

Sam Ravnborg cleaned up Makefile modifications and suggested using awk
to remove duplicate lines from modules.order instead of using separate
C program.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Bill Nottingham <notting@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Geert Uytterhoeven 8000743455 kbuild: Add missing srctree prefix for includecheck and versioncheck
Add missing $(srctree)/ prefix for scripts used by the includecheck and
versioncheck make targets

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Sam Ravnborg aa025e7d5c kbuild: document versioncheck in make help
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Randy Dunlap ec2d987f98 kbuild: add 'includecheck' help text
Add 'includecheck' to the Static analyzers help list.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Paul Mundt 12760cb4df sh: Fix up uname -m matching for native sh64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Linus Torvalds 49914084e7 Linux 2.6.24 2008-01-24 14:58:37 -08:00
Linus Nilsson d384e35a25 Makefile: Change typoed 'behavour' to 'behaviour'
Change two occurances of "behavour" to "behaviour".

Signed-off-by: Linus Nilsson <lajnold@acc.umu.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-21 19:55:04 -08:00
Linus Torvalds cbd9c88369 Linux 2.6.24-rc8 2008-01-15 20:22:48 -08:00
Linus Torvalds 3ce5445046 Linux 2.6.24-rc7 2008-01-06 13:45:38 -08:00
Linus Torvalds ea67db4cdb Linux 2.6.24-rc6 2007-12-20 17:25:48 -08:00
Linus Torvalds 82d29bf6dc Linux 2.6.24-rc5 2007-12-10 19:48:43 -08:00
Sam Ravnborg 18c32dac75 kbuild: fix building with O=.. options
The check introduced in commit:
4f1127e204 "kbuild: fix
infinite make recursion"

caused certain external modules not to build and
also caused 'make targz-pkg' to fail.
This is a minimal fix so we revert to previous
behaviour - but we do not overwrite the Makefile
in the top-level directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Jay Cliburn <jacliburn@bellsouth.net>
Cc: Jay Cliburn <jacliburn@bellsouth.net>
2007-12-09 08:55:13 +01:00
Sam Ravnborg 1cacc9ab8b kbuild: fix building with redirected output.
Jan Altenberg <jan.altenberg@linutronix.de> reported that
building with redirected input like this failed:
make O=dir oldconfig bzImage < /dev/null

The problem were caused by a make silentoldconfig being
run before oldconfig and with a non-recent .config the build
failed because silentoldconfig requires non-redirected stdin.

Silentoldconfig was run as a side-effect of having the
top-level Makefile re-made by make.
Introducing an empty rule for the top-level Makefile
(and Kbuild.include) fixed the issue.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-12-09 08:43:42 +01:00
Linus Torvalds 09b56adc98 Linux 2.6.24-rc4 2007-12-03 20:26:10 -08:00
Sam Ravnborg 80ef88d6d2 x86: simplify "make ARCH=x86" and fix kconfig all.config
Simplify "make ARCH=x86" and fix kconfig so we again
can set 64BIT in all.config.

For a fix the diffstat is nice:
 6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
0f855aa64b
-> kconfig: add helper to set config symbol from environment variable

2a113281f5
-> kconfig: use $K64BIT to set 64BIT with all*config targets

Roman Zippel pointed out that kconfig supported string
compares so the additional complexity introduced by the
above two patches were not needed.

With this patch we have following behaviour:

# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch      | 32bit         | 64bit
=====================================================
./.                     | 32bit         | 64bit
ARCH=x86                | 32bit         | 32bit
ARCH=i386               | 32bit         | 32bit
ARCH=x86_64             | 64bit         | 64bit

The general rule are that ARCH= and native architecture
takes precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit
kernel no matter what the configuration says.
The configuration will be updated to 32-bit if it was
configured to 64-bit and the other way around.

This behaviour is consistent with previous behaviour so
no suprises here.

make ARCH=x86 will per default result in a 32-bit kernel
but as the only ARCH= value x86 allow the user to select
between 32-bit and 64-bit using menuconfig. 

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-17 17:21:54 +01:00
Thomas Gleixner d0974b11e0 Remove x86 merge artifact from top Makefile
The x86 merge modified the tags target to handle the two separate
source directories. Remove it now that i386/x86_64 are gone completely.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17 16:27:01 +01:00
Linus Torvalds d9f8bcbf67 Linux 2.6.24-rc3 2007-11-16 21:16:36 -08:00
Sam Ravnborg daa93fab82 x86: enable "make ARCH=x86"
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".

With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
   => select 64-bit

Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12 21:02:20 +01:00
Sam Ravnborg d746d647f3 x86: do not use $(ARCH) when not needed
For x86 ARCH may say i386 or x86_64 and soon x86.
Rely on CONFIG_X64_32 to select between 32/64 or just
hardcode the value as appropriate.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12 21:02:20 +01:00
Linus Torvalds dbeeb816e8 Linux 2.6.24-rc2 2007-11-06 13:57:46 -08:00
Sam Ravnborg 69ee0b3522 kbuild: do not pick up CFLAGS from the environment
Too many people have CFLAGS set to support building userspace.
And now Kbuild picks up CFLAGS this caused troubles.

Although people should realise that setting CFLAGS has
a 'global' effect the impact on the kernel build is a suprise.
So change kbuild to pick up value from KCFLAGS that is
much less used.

When kbuild pick up a value it will warn like this:
Makefile:544: "WARNING: Appending $KCFLAGS (-O3) from environment to kernel $CFLAGS"

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bächler <thomas@archlinux.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
2007-11-04 19:00:46 +01:00
Paul Mundt 236b195744 sh: Correct SUBARCH matching.
When configuring the kernel natively the uname matching is off,
so fix up the uname mangling to get the proper SUBARCH. Needs
an explicit range so that SH-5 doesn't break.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-02 12:22:47 +09:00
Sam Ravnborg 74b469f2e6 x86: move i386 and x86_64 Makefiles to arch/x86
Moving the ARCH specific Makefiles for i386 and x86_64
required a litle bit tweaking in the top-lvel Makefile.

SRCARCH is now set in the top-level Makefile
because we need this info to include the correct
arch Makefile.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25 22:27:34 +02:00
Linus Torvalds c9927c2bf4 Linux 2.6.24-rc1
The patch is big.  Really big.  You just won't believe how vastly hugely
mindbogglingly big it is.  I mean you may think it's a long way down the
road to the chemist, but that's just peanuts to how big the patch from
2.6.23 is.

But it's all good.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 20:50:57 -07:00
Sam Ravnborg d8d2e78a06 kbuild: allow depmod in cross builds again
depmod from module-init-tools 3.3-pre2 are reported
to work fine in cross build.
depmod from module-init-tools 3.1-pre5 are known to SEGV

Do not workaround older module-init-tools bugs here.
The right fix is for users to upgrade module-init-tools.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
2007-10-22 20:04:37 +02:00
Sam Ravnborg ab19f8794a kbuild: fix modules_install after a 'make vmlinux'
make vmlinux would delete the content of $(MODVERDIR)
equals .tmp_versions. This caused a subsequent
make modules_install to fail.

Fix it so we clean the directory only for the
modules build - but we still unconditionally create it so
we can do:
make dir/file.ko
without a preceeding make modules.

Reported by David Miller <davem@davemloft.net>

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Miller <davem@davemloft.net>
2007-10-22 20:04:37 +02:00
David Brownell 0b463ff139 kbuild: fix toplevel Makefile/depmod
This removes a syntax error (seen building on Ubuntu Feisty).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-20 20:10:19 +02:00
Linus Torvalds 4800be295c Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: fix first module build
  kconfig: update kconfig-language text
  kbuild: introduce cc-cross-prefix
  kbuild: disable depmod in cross-compile kernel build
  kbuild: make deb-pkg - add 'Provides:' line
  kconfig: comment typo in scripts/kconfig/Makefile.
  kbuild: stop docproc segfaulting when SRCTREE isn't set.
  kbuild: modpost problem when symbols move from one module to another
  kbuild: cscope - filter out .tmp_* in find_sources
  kbuild: mailing list has moved
  kbuild: check asm symlink when building a kernel
2007-10-19 13:47:38 -07:00
Sam Ravnborg 7bb9d092de kbuild: fix first module build
When building a specific module before doing a total kernel
build it failed because $(MORVERDIR) were missing.
Creating the MODVERDIR explicit (independent of KBUILD_MODULES)
fixed this. As a side-effect the MODVERDIR will be created
also for a non-module build - but no harm done by that.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-19 22:20:02 +02:00
Mathieu Desnoyers 267c4025f2 markers: Add samples subdir
Begin infrastructure for kernel code samples in the samples/ directory.
Add its Kconfig and Kbuild files.
Source its Kconfig file in all arch/ Kconfigs.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:55 -07:00
Sam Ravnborg 50a8ec31c3 kbuild: disable depmod in cross-compile kernel build
When building embedded systems in a cross-compile environment and
populating a target's file system image, we don't want to run the
depmod on the host as we may be building for a completely different
architecture. Since there's no such thing as a cross-depmod, we
just disable running depmod in the cross-compile case and we just
run depmod on the target at bootup.

Inspired by patches from Christian, Armin and Deepak.

This solves: http://bugzilla.kernel.org/show_bug.cgi?id=3881

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Christian Bjølevik <nafallo@magicalforest.se>
Cc: Deepak Saxena <dsaxena@mvista.com> and
Cc: Armin Kuster <akuster@mvista.com>,
2007-10-18 23:17:06 +02:00
Yinghai Lu 37ab7a2696 kbuild: cscope - filter out .tmp_* in find_sources
remove .tmp_kallsyms*.S in cscope.files

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18 13:35:49 +02:00
Sam Ravnborg fc333b2df3 kbuild: check asm symlink when building a kernel
We often hit the situation where the asm symlink
in include/ points to the wrong architecture.
In 9 out of 10 cases thats because we forgot to set
ARCH but sometimes we just reused the same tree
for another ARCH. For the merged x86 tree we need
to create a new symlink but this is not obvious.
So with the following patch we check if the symlink
points to the correct architecture and error
out if this is not the case.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18 09:06:34 +02:00
Yinghai Lu f8bea58b6a kbuild: fix typo SRCARCH in find_sources
otherwise get the two copy file list in SRCARCH

for cscope:
C symbol: start_kernel

  File           Function            Line
0 proto.h        <global>              11 extern void start_kernel(void );
1 start_kernel.h <global>              10 extern asmlinkage void __init start_kernel(void );
2 head32.c       i386_start_kernel     37 start_kernel();
3 head32.c       i386_start_kernel     37 start_kernel();
4 head64.c       x86_64_start_kernel   85 start_kernel();
5 head64.c       x86_64_start_kernel   85 start_kernel();
6 head_32.S      options              199 cmpb $0,%cl #the first CPU calls start_kernel
7 head_32.S      options              199 cmpb $0,%cl #the first CPU calls start_kernel
8 enlighten.c    xen_start_kernel    1145 start_kernel();
9 enlighten.c    xen_start_kernel    1145 start_kernel();
a lguest.c       lguest_init         1095 start_kernel();
b main.c         start_kernel         513 asmlinkage void __init start_kernel(void )

after the patch:
C symbol: start_kernel

  File           Function            Line
0 proto.h        <global>              11 extern void start_kernel(void );
1 start_kernel.h <global>              10 extern asmlinkage void __init start_kernel(void );
2 head32.c       i386_start_kernel     37 start_kernel();
3 head64.c       x86_64_start_kernel   85 start_kernel();
4 head_32.S      options              199 cmpb $0,%cl #the first CPU calls start_kernel
5 enlighten.c    xen_start_kernel    1145 start_kernel();
6 lguest.c       lguest_init         1095 start_kernel();
7 main.c         start_kernel         513 asmlinkage void __init start_kernel(void )

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17 21:39:23 +02:00
Sam Ravnborg 06c5040cdb kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP
The variable CPPFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.

This patch replace use of CPPFLAGS with KBUILD_CPPFLAGS all over the
tree and enabling one to use:
make CPPFLAGS=...
to specify additional CPP commandline options.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 22:17:25 +02:00
Sam Ravnborg 52bcc3308a kbuild: enable use of AFLAGS and CFLAGS on commandline
The previous patches was preparation.
With this patch we can now say:
make CFLAGS=-Os vmlinux

And the option specified will be appended to the
options passed to gcc for C files.

For assembler use:
make AFLAGS=-foo vmlinux
for the same functionality.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 22:03:58 +02:00
Sam Ravnborg 222d394d30 kbuild: enable 'make AFLAGS=...' to add additional options to AS
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 21:59:31 +02:00
Sam Ravnborg a0f97e06a4 kbuild: enable 'make CFLAGS=...' to add additional options to CC
The variable CFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of CFLAGS with KBUILD_CFLAGS all over the
tree and enabling one to use:
make CFLAGS=...
to specify additional gcc commandline options.

One usecase is when trying to find gcc bugs but other
use cases has been requested too.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k

Test was simple to do a defconfig build, apply the patch and check
that nothing got rebuild.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-14 22:21:35 +02:00
Adrian Bunk 295ac05186 kbuild: call export_report from the Makefile
The main feature is that export_report now automatically works
for O= builds.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:39:02 +02:00
Milton Miller 0b35786d77 kbuild: call make once for all targets when O=.. is used
Change the invocations of make in the output directory Makefile and the
main Makefile for separate object trees to pass all goals to one $(MAKE)
via a new phony target "sub-make" and the existing target _all.

When compiling with separate object directories, a separate make is called
in the context of another directory (from the output directory the main
Makefile is called, the Makefile is then restarted with current directory
set to the object tree).  Before this patch, when multiple make command
goals are specified, each target results in a separate make invocation.
With make -j, these invocations may run in parallel, resulting in multiple
commands running in the same directory clobbering each others results.

I did not try to address make -j for mixed dot-config and no-dot-config
targets.  Because the order does matter, a solution was not obvious.
Perhaps a simple check for MAKEFLAGS having -j and refusing to run would
be appropriate.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Roland McGrath cf851aa756 kbuild: pass -g to assembler under CONFIG_DEBUG_INFO
The assembler for a while now supports -gdwarf to generate source line info
just like the C compiler does.  Source-level assembly debugging sounds like an
oxymoron, but it is handy to be able to see the right source file and read its
comments rather than just the disassembly.  This patch enables -gdwarf for
assembly files when CONFIG_DEBUG_INFO=y and the assembler supports the option.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:20:32 +02:00
Sam Ravnborg 4f1127e204 kbuild: fix infinite make recursion
Jan Engelhardt <jengelh@computergmbh.de> reported:
You can cause a recursion in kbuild/make with the following:

make O=$PWD kernel/time.o
make mrproper

Of course no one would use O=$PWD (that's just the testcase),
but this happened too often:

/ws/linux/linux-2.6.23$ make O=/ws/linux/linux-2.6.23 kernel/time.o
(Oops - should have been O=/ws/linux/obj-2.6.23!)

Fixed by an explicit test for this case - we error
out if output directory and source directory are the same.

Tested-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:32 +02:00
Mike Frysinger c34114f4ac kbuild: clean Modules.symvers in external module dirs
At the moment, running `make clean` in an external module directory does a
nice job of cleaning up with one exception: it leaves behind Modules.symvers.
Attached patch adds this file to the clean list for external modules.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12 21:15:30 +02:00
Thomas Gleixner 91e034eff1 x86: Fix the $(ARCH) dependent help output in the top Makefile
Change the $(ARCH) dependency to $(SRCARCH) to honor the x86
namespace for i386 and x86_64.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 17:53:52 +02:00
Thomas Gleixner 96a388de5d i386/x86_64: move headers to include/asm-x86
Move the headers to include/asm-x86 and fixup the
header install make rules

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:20:03 +02:00
Thomas Gleixner 2eb4c95094 Kbuild: prepare scope and tags for arch/x86
Preparatory patch for the source merge of arch/i386 and arch/x86_64
into arch/x86. Make scope and tags aware of SRCARCH

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-11 11:11:38 +02:00
Thomas Gleixner 6752ed90da Kbuild: allow arch/xxx to use a different source path
Preparatory patch for the source merge of arch/i386 and arch/x86_64
into arch/x86. This allows to keep the original arch directories as
stubs for the main Makefiles, Kconfigs et. al during the transition
phase while having the code in the new arch/x86 directory.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-11 11:11:36 +02:00
Linus Torvalds bbf25010f1 Linux 2.6.23 2007-10-09 13:31:38 -07:00
Linus Torvalds 3146b39c18 Linux 2.6.23-rc9
No, I didn't want to do this, but we had more stuff go in after -rc8
than we had in the previous -rc. Gaah.
2007-10-01 20:24:52 -07:00
Linus Torvalds 4942de4a0e Linux 2.6.23-rc8
Getting there...
2007-09-24 17:33:10 -07:00
Linus Torvalds 81cfe79b9c Linux 2.6.23-rc7 2007-09-19 16:01:13 -07:00
Linus Torvalds 0d4cbb5e7f Linux 2.6.23-rc6 2007-09-10 19:50:29 -07:00
Linus Torvalds 40ffbfad6b Linux 2.6.23-rc5 2007-08-31 23:08:24 -07:00
Linus Torvalds b07d68b5ca Linux 2.6.23-rc4 2007-08-27 18:32:35 -07:00
Linus Torvalds 39d3520c92 Linux 2.6.23-rc3 2007-08-12 21:25:24 -07:00
Linus Torvalds d4ac2477fa Linux 2.6.23-rc2 2007-08-03 19:49:55 -07:00
Roland McGrath 114f515777 kbuild: use LDFLAGS_MODULE only for .ko links
Sam Ravnborg pointed out that Documentation/kbuild/makefiles.txt already
says this is what it's for.  This patch makes the reality live up to the
documentation.  This fixes the problem of LDFLAGS_BUILD_ID getting into too
many places.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-25 21:18:19 +02:00
Linus Torvalds f695baf2df Linux 2.6.23-rc1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-22 13:41:00 -07:00
Linus Torvalds efffbeee5b Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (33 commits)
  xtensa: use DATA_DATA in xtensa
  powerpc: add missing DATA_DATA to powerpc
  cris: use DATA_DATA in cris
  kallsyms: remove usage of memmem and _GNU_SOURCE from scripts/kallsyms.c
  kbuild: use -fno-optimize-sibling-calls unconditionally
  kconfig: reset generated values only if Kconfig and .config agree.
  kbuild: fix the warning when running make tags
  kconfig: strip 'CONFIG_' automatically in kernel configuration search
  kbuild: use POSIX BRE in headers install target
  Whitelist references from __dbe_table to .init
  modpost white list pattern adjustment
  kbuild: do section mismatch check on full vmlinux
  kbuild: whitelist references from variables named _timer to .init.text
  kbuild: remove hardcoded _logo names from modpost
  kbuild: remove hardcoded apic_es7000 from modpost
  kbuild: warn about references from .init.text to .exit.text
  kbuild: consolidate section checks
  kbuild: refactor code in modpost to improve maintainability
  kbuild: ignore section mismatch warnings originating from .note section
  kbuild: .paravirtprobe section is obsolete, so modpost doesn't need to handle it
  ...
2007-07-19 14:28:19 -07:00
Roland McGrath 18991197b4 Use --build-id ld option
This change passes the --build-id when linking the kernel and when linking
modules, if ld supports it.  This is a new GNU ld option that synthesizes an
ELF note section inside the read-only data.  The note in this section contains
unique identifying bits called the "build ID", which are generated so as to be
different for any two linked ELF files that aren't identical.  The build ID
can be recovered from stripped files, memory dumps, etc.  and used to look up
the original program built, locate debuginfo or other details or history
associated with it.  For normal program linking, the compiler passes
--build-id to ld by default, but the option is needed when using ld directly
as we do.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:48 -07:00