Commit Graph

357 Commits

Author SHA1 Message Date
Graf Yang 943aee0c68 Blackfin: SMP: make all barriers handle cache issues
When suspending/resuming, the common task freezing code will run in
parallel and freeze processes on each core.  This is because the code
uses the non-smp version of memory barriers (as well it should).

The Blackfin smp barrier logic at the moment contains the cache sync
logic, but the non-smp barriers do not.  This is incorrect as Rafel
summarized:
> ...
> The existing memory barriers are SMP barriers too, but they are more
> than _just_ SMP barriers.  At least that's how it is _supposed_ to be
> (eg. rmb() is supposed to be stronger than smp_rmb()).
> ...
> However, looking at the blackfin's definitions of SMP barriers I see
> that it uses extra stuff that should _also_ be used in the definitions
> of the mandatory barriers.
> ...

URL: http://lkml.org/lkml/2011/4/13/11
LKML-Reference: <BANLkTi=F-C-vwX4PGGfbkdTBw3OWL-twfg@mail.gmail.com>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-13 19:34:04 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Mike Frysinger 92a19d66a3 Blackfin: bitops: fix include order after little endian inclusion
The le.h header requires things like test_bit to be declared, so we need
to move its inclusion to after the point where that happens.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-25 16:54:13 -04:00
Linus Torvalds 05061bf678 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: bf54x: re-enable anomaly 05000353 for all revs
  Blackfin: enable atomic64_t support
  Blackfin: wire up new syncfs syscall
  Blackfin: SMP: flush CoreB cache when shutting down
2011-03-24 08:24:28 -07:00
Akinobu Mita 61f2e7b0f4 bitops: remove minix bitops from asm/bitops.h
minix bit operations are only used by minix filesystem and useless by
other modules.  Because byte order of inode and block bitmaps is different
on each architecture like below:

m68k:
	big-endian 16bit indexed bitmaps

h8300, microblaze, s390, sparc, m68knommu:
	big-endian 32 or 64bit indexed bitmaps

m32r, mips, sh, xtensa:
	big-endian 32 or 64bit indexed bitmaps for big-endian mode
	little-endian bitmaps for little-endian mode

Others:
	little-endian bitmaps

In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.

CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa).  The architectures which always use little-endian
bitmaps do not select these options.

Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:22 -07:00
Akinobu Mita f312eff816 bitops: remove ext2 non-atomic bitops from asm/bitops.h
As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself.  Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:21 -07:00
Akinobu Mita 861b5ae7cd bitops: introduce little-endian bitops for most architectures
Introduce little-endian bit operations to the big-endian architectures
which do not have native little-endian bit operations and the
little-endian architectures.  (alpha, avr32, blackfin, cris, frv, h8300,
ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa)

These architectures can just include generic implementation
(asm-generic/bitops/le.h).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:15 -07:00
Mike Frysinger bee18bebda Blackfin: enable atomic64_t support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-22 21:03:17 -04:00
Mike Frysinger 4e3d96deff Blackfin: wire up new syncfs syscall
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-22 21:03:16 -04:00
Mike Frysinger a8d0142fb7 Blackfin: wire up new syscalls
Hook up name_to_handle_at, open_by_handle_at, and clock_adjtime.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:05:25 -04:00
Philippe Gerum 1353d050fa Blackfin/ipipe: restore pipeline bits in irqflags
This patch fixes the Blackfin irqflags to make them I-pipe aware anew,
after the introduction of the hard_local_irq_*() API.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:11 -04:00
Philippe Gerum 5b5da4c4b8 Blackfin/ipipe: upgrade to I-pipe mainline
This patch introduces Blackfin-specific bits to support the current
tip of the interrupt pipeline development, mainly:

- 2/3-level interrupt maps (sparse IRQs)
- generic virq handling
- sysinfo v2 format for ipipe_get_sysinfo()

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:10 -04:00
Sonic Zhang c6345ab1a3 Blackfin: SMP: work around anomaly 05000491
In order to safely work around anomaly 05000491, we have to execute IFLUSH
from L1 instruction sram.  The trouble with multi-core systems is that all
L1 sram is visible only to the active core.  So we can't just place the
functions into L1 and call it directly.  We need to setup a jump table and
place the entry point in external memory.  This will call the right func
based on the active core.

In the process, convert from the manual relocation of a small bit of code
into Core B's L1 to the more general framework we already have in place
for loading arbitrary pieces of code into L1.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:04 -04:00
Graf Yang 6f546bc3ac Blackfin: SMP: implement cpu_freq support
Re-use some of the existing cpu hotplugging code in the process.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:03 -04:00
Mike Frysinger b5fc12df90 Blackfin: add bfin_write_{or,and} helpers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 03:49:24 -04:00
Sonic Zhang 0f66e50af5 serial: bfin_5xx: split uart RX lock from uart port lock to avoid deadlock
The RX lock is used to protect the RX buffer from concurrent access in DMA
mode between the timer and RX interrupt routines.  It is independent from
the uart lock which is used to protect the TX buffer.  It is possible for
a uart TX transfer to be started up from the RX interrupt handler if low
latency is enabled.  So we need to split the locks to avoid deadlocking in
this situation.

In PIO mode, the RX lock is not necessary because the handle_simple_irq
and handle_level_irq functions ensure driver interrupt handlers are called
once on one core.

And now that the RX path has its own lock, the TX interrupt has nothing to
do with the RX path, so disabling it at the same time.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 14:44:54 -08:00
Mike Frysinger e15124c14c Blackfin: dpmc.h: pull in new pll.h
Any consumer of dpmc.h expects to use VR_CTL, so also pull in the new
mach/pll.h header for those functions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:17 -05:00
Mike Frysinger 10cdc1a78a Blackfin: unify pll.h headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:16 -05:00
Graf Yang 2c1657c29f Blackfin: SMP: relocate blackfin_core_id() definition
Since we're breaking apart some inter-header dependencies to avoid more
circular loops, move the blackfin_core_id() definition to the func that
it is based upon.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:15 -05:00
Mike Frysinger 05c3457ec2 Blackfin: SMP: fix build breakage in cache.h
The SMP code needs "asmlinkage" which linkage.h provides.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:14 -05:00
Graf Yang 54d756ed1a Blackfin: SMP: add missing arch_{read,write}_lock_flags helpers
Common code expects these to be defined for SMP ports, so add them.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:14 -05:00
Mike Frysinger 71a516adb6 Blackfin: SMP: fix asm/bitops.h errors
The common asm-generic non-atomic bitops.h defines test_bit() for us, but
we need to use our own version.  So redirect the definition of this func
to avoid having to inline the rest of the asm-generic file.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:12 -05:00
Graf Yang 71a66287d9 Blackfin: SMP: rename the arch_xxx lock funcs to __raw_xxx
The external functions are named __raw_xxx, not arch_xxx, so rename the
prototypes to match reality.  This fixes some simple build errors in the
bfin_ksyms.c code which exports these helpers to modules.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:11 -05:00
Sonic Zhang 57afb39935 serial: bfin_5xx: move resources into board files
Rather than maintain Kconfig entries where people have to enter raw
numbers and hardcode lists of addresses/pins in the driver itself,
push it all to platform resources.  This lets us simplify the driver,
the Kconfig, and gives board porters greater flexibility.

In the process, we need to also start supporting the early platform
interface.  Not a big deal, but it causes the patch to be bigger than
a simple resource relocation.

All the Blackfin boards already have their resources updated and in
place for this change.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:11 -05:00
Mike Frysinger 4de2bf8786 Blackfin: push gpio (port) defines into common headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:06 -05:00
Mike Frysinger 5e3bcf30d6 Blackfin: dma: constify MMR pointer array
The array of pointers is never written, so constify it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:05 -05:00
Mike Frysinger 6c8e75a06c Blackfin: bfin_dma.h: start a header for DMA MMR layout
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:04 -05:00
Mike Frysinger cfbf1677a3 Blackfin: switch to asm-generic/io.h
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:04 -05:00
Mike Frysinger efb2d31c1c asm-generic/io.h: add reads[bwl]/writes[bwl] helpers
A bunch of arches define reads[bwl]/writes[bwl] helpers for accessing
memory mapped registers.  Since the Blackfin ones aren't specific to
Blackfin code, move them to the common asm-generic/io.h for people.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:03 -05:00
Mike Frysinger b1524e29e3 Blackfin: bfin_serial.h: unify heavily duplicated serial code
Each Blackfin port has been duplicating UART structures and defines when
there really is no need for it.  So start a new bfin_serial.h header to
unify all these pieces and give ourselves a fresh start.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:02 -05:00
Philippe De Muyter c925cf0b80 m68k{nommu}/blackfin : remove old assembler-only flags bit definitions
Long ago, PT_TRACESYS_OFF and friends were introduced as hard defines to
avoid straight constants in assembler parts of linux m68k.  They are not
used anymore, and were not updated to follow changes in linux kernel.
Remove them.  When similar constants are needed, they are now generated
using asm-offsets.c.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:12 -07:00
Mike Frysinger ad3e01a331 Blackfin: fix inverted anomaly 05000481 logic
No one uses these MMRs so we didn't notice when the anomaly handling
logic was inverted.

Reported-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 17:24:00 -04:00
Mike Frysinger ff7cbc4b5c Blackfin: ppi/spi/twi headers: add missing __BFP undef
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 04:54:33 -04:00
Mike Frysinger 61c16b5c74 Blackfin: bfin_twi.h: start a common TWI header
Start one place for TWI definitions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25 04:54:32 -04:00
Mike Frysinger b9ac41e314 Blackfin: bfin_spi.h: add MMR peripheral layout
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:03 -04:00
Mike Frysinger fec84d21c5 Blackfin: bfin_ppi.h: start a common PPI/EPPI header
Start unifying the PPI/EPPI peripheral structures in one place.  This
may be used by camera/video/fpga/high speed devices.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:03 -04:00
Mike Frysinger faf3d9ed2b Blackfin: bfin_can.h: add missing VERSION/VERSION2 MMRs
Also document the mailbox (channel) data array layout.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:03 -04:00
Mike Frysinger 49e00edbb7 Blackfin: H8606: move 8250 irqflags to platform resources
Now that the common 8250 serial driver supports an "irqflags" field,
we don't need to patch in a custom define into the code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:01 -04:00
Sonic Zhang 99a5b2878b Blackfin: add new cacheflush syscall
Flushing caches sometimes requires anomaly workarounds which require
supervisor-only insns.  Normally we don't need to flush caches from
userspace so this isn't a problem, but when gcc generates trampolines
on the stack, we do.

So add a new syscall for gcc to use modeled after the mips version.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:59 -04:00
Robin Getz c0ab938745 Blackfin: workaround anomaly 05000481 (corruption with ITEST MMRs)
Nothing actually needs to use these MMRs (as direct cache manipulation
is done with the DTEST MMRs), so simply hide the read funcs behind the
anomaly define.  They're generally unusable anyways when this anomaly
is in effect.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:55 -04:00
Linus Torvalds e36f561a2c Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags:
  Fix IRQ flag handling naming
  MIPS: Add missing #inclusions of <linux/irq.h>
  smc91x: Add missing #inclusion of <linux/irq.h>
  Drop a couple of unnecessary asm/system.h inclusions
  SH: Add missing consts to sys_execve() declaration
  Blackfin: Rename IRQ flags handling functions
  Blackfin: Add missing dep to asm/irqflags.h
  Blackfin: Rename DES PC2() symbol to avoid collision
  Blackfin: Split the BF532 BFIN_*_FIO_FLAG() functions to their own header
  Blackfin: Split PLL code from mach-specific cdef headers
2010-10-21 14:37:27 -07:00
Mike Frysinger 5e8592dca3 spi/bfin_spi: combine duplicate SPI_CTL read/write logic
While combining things, also switch to the proper SPI bit define names.
This lets us punt the rarely used SPI defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-18 02:49:39 -04:00
Barry Song d3cc71f71a spi/bfin_spi: redo GPIO CS handling
The common SPI layers take care of detecting CS conflicts and preventing
two devices from claiming the same CS.  This causes problems for the GPIO
CS support we currently have as we are using CS0 to mean "GPIO CS".  But
if we have multiple devices using a GPIO CS, the common SPI layers see
multiple devices using the virtual "CS0" and reject any such attempts.

To make both work, we introduce an offset define.  This represents the
max number of hardware CS values that the SPI peripheral supports.  If
the CS is below this limit, we know we can use the hardware CS.  If it's
above, we treat it as a GPIO CS.  This keeps the CS unique as seen by
the common code and prevents conflicts.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-18 02:49:36 -04:00
Mike Frysinger 0d2c6de225 Blackfin: SPI: expand SPI bitmasks
Expand the BIT_CTL defines to use the naming convention of the hardware,
and expand the masks to cover all documented bits.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-18 02:49:35 -04:00
Mike Frysinger 201bbc6fd8 spi/bfin_spi: drop custom cs_change_per_word support
As David points out, the cs_change_per_word option isn't standard, nor is
anyone actually using it.  So punt all of the dead code considering it
makes up ~10% of the code size.

Reported-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-18 02:49:30 -04:00
David Howells df9ee29270 Fix IRQ flag handling naming
Fix the IRQ flag handling naming.  In linux/irqflags.h under one configuration,
it maps:

	local_irq_enable() -> raw_local_irq_enable()
	local_irq_disable() -> raw_local_irq_disable()
	local_irq_save() -> raw_local_irq_save()
	...

and under the other configuration, it maps:

	raw_local_irq_enable() -> local_irq_enable()
	raw_local_irq_disable() -> local_irq_disable()
	raw_local_irq_save() -> local_irq_save()
	...

This is quite confusing.  There should be one set of names expected of the
arch, and this should be wrapped to give another set of names that are expected
by users of this facility.

Change this to have the arch provide:

	flags = arch_local_save_flags()
	flags = arch_local_irq_save()
	arch_local_irq_restore(flags)
	arch_local_irq_disable()
	arch_local_irq_enable()
	arch_irqs_disabled_flags(flags)
	arch_irqs_disabled()
	arch_safe_halt()

Then linux/irqflags.h wraps these to provide:

	raw_local_save_flags(flags)
	raw_local_irq_save(flags)
	raw_local_irq_restore(flags)
	raw_local_irq_disable()
	raw_local_irq_enable()
	raw_irqs_disabled_flags(flags)
	raw_irqs_disabled()
	raw_safe_halt()

with type checking on the flags 'arguments', and then wraps those to provide:

	local_save_flags(flags)
	local_irq_save(flags)
	local_irq_restore(flags)
	local_irq_disable()
	local_irq_enable()
	irqs_disabled_flags(flags)
	irqs_disabled()
	safe_halt()

with tracing included if enabled.

The arch functions can now all be inline functions rather than some of them
having to be macros.

Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile]
Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze]
Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR]
Acked-by: Tony Luck <tony.luck@intel.com> [IA-64]
Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R]
Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC]
Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390]
Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score]
Acked-by: Matt Fleming <matt@console-pimps.org> [SH]
Acked-by: David S. Miller <davem@davemloft.net> [Sparc]
Acked-by: Chris Zankel <chris@zankel.net> [Xtensa]
Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha]
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300]
Cc: starvik@axis.com [CRIS]
Cc: jesper.nilsson@axis.com [CRIS]
Cc: linux-cris-kernel@axis.com
2010-10-07 14:08:55 +01:00
David Howells 3b139cdb37 Blackfin: Rename IRQ flags handling functions
Rename h/w IRQ flags handling functions to be in line with what is expected for
the irq renaming patch.  This renames local_*_hw() to hard_local_*() using the
following perl command:

	perl -pi -e 's/local_irq_(restore|enable|disable)_hw/hard_local_irq_\1/ or s/local_irq_save_hw([_a-z]*)[(]flags[)]/flags = hard_local_irq_save\1()/' `find arch/blackfin/ -name "*.[ch]"`

and then fixing up asm/irqflags.h manually.

Additionally, arch/hard_local_save_flags() and arch/hard_local_irq_save() both
return the flags rather than passing it through the argument list.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-07 14:08:52 +01:00
David Howells 5c74874bc9 Blackfin: Add missing dep to asm/irqflags.h
Add a missing dependency (mach/blackfin.h) to asm/irqflags.h so that
bfin_read_IMASK() can be used by inline functions.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-07 14:08:51 +01:00
Mike Frysinger ac0a5042be Blackfin: punt duplicate SPORT MMR defines
The common bfin_sport.h header now has unified definitions of these, so
stop polluting the global namespace.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-27 15:58:27 -04:00
Mike Frysinger f3411b16c7 Blackfin: wire up new fanotify/prlimit64 syscalls
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-23 04:24:09 -04:00