Commit Graph

376 Commits

Author SHA1 Message Date
Takashi Sakamoto 6b94fb14fc ALSA: dice: fix memory leak when unplugging
When sound card is going to be released, dice private data is
also released. Then all of data should be released. However,
stream data is not released. This causes memory leak when
unplugging dice unit.

This commit fixes the bug.

Fixes: 4bdc495c87b3('ALSA: dice: handle several PCM substreams when any isochronous streams are available')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28 09:32:57 +02:00
Takashi Sakamoto 8cc1a8ab47 ALSA: dice: use structure to represent register parameters instead of array with basic type element
In dice interface, two blocks of register are accessible via IEEE 1394
asynchronous transaction to represent the number of supported isochronous
streams and the number of quadlets for stream information.

Current ALSA dice driver uses array with 'unsigned int' element for
temporary cache of these information. But using structure is preferable
for begin easily comprehensible.

This commit applies a local structure for this aim.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-10 15:44:39 +01:00
Takashi Sakamoto 7cafc65b3a ALSA: dice: force to add two pcm devices for listed models
Some models reduce the number of available isochronous streams for higher
sampling transfer frequency. Such models bring an issue about how to add
PCM substreams. When at lower sampling transfer frequency, the
models reports whole available streams, thus this driver can add enough
number of PCM substreams at probing time. On the other hand, at higher
sampling transfer frequency, this driver can just add reduced number of
PCM substreams. After probed, even if the sampling transfer frequency is
changed to lower rate, fewer PCM substreams are actually available. This
is inconvenience.

For the reason, this commit adds a list so that this driver assume models
on the list to have two pairs of PCM substreams. This list keeps the name
of model in which the number of available streams differs depending on
sampling transfer frequency.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-09 16:20:58 +01:00
Takashi Sakamoto 4bdc495c87 ALSA: dice: handle several PCM substreams when any isochronous streams are available
In former commits, ALSA dice driver can handle available isochronous
streams. This commit adds support for several PCM substreams on the
streams.

The additional PCM substreams are available via another ALSA PCM character
devices so that one ALSA PCM application can handle them without cumbersome
operations. For example, two PCM substreams are available on each stream,
two ALSA character devices are added for them. In configuration space of
alsa-lib, it's represented with 'hw:0,0' and 'hw:0,1'.

The PCM substreams are constraint to parameters of the corresponding
streams. If the PCM substreams are unavailable for some reasons,
open(2) to ALSA PCM character device returns error and reports ENXIO.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-09 16:20:57 +01:00
Takashi Sakamoto 436b5abe22 ALSA: dice: handle whole available isochronous streams
This commit enables ALSA dice driver to handle whole available streams.

In Dice, certain registers represent the number of available streams at
current sampling transfer frequency for both directions. The parameters
of each stream are represented in a block of register. This block is
aligned sequentially. These streams start simultaneously by writing
enable bit to a register.

This commit operates these registers when starting/stopping streams.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-09 16:20:57 +01:00
Takashi Sakamoto 8ae25b760a ALSA: dice: have two sets of isochronous resources/streams
Currently ALSA dice driver handles a pair of isochronous resources for
IEC 61883-1/6 packet streaming. While, according to some documents about
ASICs named as 'Dice', several isochronous streams are available.

Here, I start to describe ASICs produced under 'Dice' name.
 * Dice II (designed by wavefront semiconductor, including TCAT's IP)
   * STD (with limited functionality of DTCP)
   * CP  (with full functionality of DTCP)
 * TCD2210/2210-E (so-called 'Dice Mini')
 * TCD2220/2220-E (so-called 'Dice Jr.')
 * TCD3070-CH (so-called 'Dice III')

Some documents are public and we can see hardware design of them. We can
find some articles about hardware internal register definitions
(not registers exported to IEEE 1394 bus).

* DICE II User Guide
  * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf
    * 6.1 AVS Audio Receivers
      * Table 6.1: AVS Audio Receiver Memory Map
        * ARX1-ARX4
    * 6.2 AVS Audio Transmitters
      * Table 6.2: AVS Audio Transmitter Memory Map
        * ATX1, ATX2
* TCD22xx User Guide
  * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf
    * 6.1 AVS Audio Receivers
      * Table 66: AVS Audio Receiver Memory Map
        * ARX1, ARX2
    * 6/2 AVS Audio Transmitters
      * Table 67: AVS Audio Transmitter Memory Map
        * ATX1, ATX2
* DICE III
  * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf
    * Dual stream 63 channel transmitter/receiver

For Dice II and TCD22xx series, maximum 16 data channels are transferred in
an AMDTP packet, while for Dice III, maximum 32 data channels are
transferred.

According to the design of the series of these ASICs, this commit allows
this driver to handle additional set of isochronous resources. For
practical reason, two pair of isochronous resources are added. As of this
commit, this driver still use a pair of the first isochronous resources.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-09 16:20:56 +01:00
Takashi Sakamoto 1387e3eafa ALSA: dice: drop duplex streams synchronization to transfer own time stamps
This commit drops implementation of duplex streams synchronization
from ALSA dice driver, due to a reason of hardware design. This patch
allows dice-based units to generate sounds correctly when isochronous
packet streaming starts at first time.

In IEC 61883-6:2005, CIP packetization layer for AM824 data format
utilizes the value of SYT field in CIP header of received packet for
a reference to phase lock loop. Figure 3 in clause 4.3 describes it.
The value is an offset from cycle_time field of every cycle start packet
from cycle master on IEEE 1394 bus. The time calculated with these two
fields is called as 'presentation timestamp' which represents the time
to play data included in the packet.

Although, this idea includes some problems due to accuracy of timekeep in
cycle master, accuracy of transmission of cycle start packet on the bus
with the other units, accuracy of sampling clock in data transmitter side
and accuracy of replay in data receiver side. In most case, these
accuracies somewhat worse because there's no such ideal hardwares in this
world.

For the issues, ASICs for Dice include Jitter Elimination Technologies
(JET) PLL. The PLL can handle several sources of clock and compensate it
with high-precision internal clock source. The sequence of value in syt
field of received AMDTP packets is one of the sources, therefore
transmitters on IEEE 1394 bus should transfer it.

On the other hand, current ALSA dice driver is programmed with a mode of
duplex streams with synchronization. In this mode, the driver outputs
packets after some incoming packets are handled, to re-use the value of
SYT field in incoming packets to the value for outgoing packets. This mode
is enabled when source signal of sampling clock is set to internal, and
this is a major use case. Thus, in most cases, the unit receives no packets
during a short time after packet streaming starts.

As long as I experienced, this causes the units to generate no sounds at
first time to receive packets. This issue occurs only with Dice II. I guess
this is due to a quirk of the PLL. In short, the PLL cannot generate firm
signals to ADCs/DACs or the other ICs when no packets are received in the
beginning of packet streaming. While, on second time or later, the unit
generates sound correctly. I guess that starting packet streaming at first
time sets the PLL correctly.

Well, still based on my hypothesis and no way to prove it, this commit
drops duplex streams synchronization from this driver. At least, the PLL
requires the sequence of value in SYT field of received AMDTP packets as
one of source of clock signals with internal clock source.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-28 10:56:24 +01:00
Takashi Sakamoto 956dea9e91 ALSA: oxfw: discontinue MIDI substream for scs1x at transaction failure
With a previous commit, ALSA oxfw driver retries transferring MIDI
messages at transaction failure for scs1x. On the other hand, there're
fatal transaction error. Then, no MIDI messages reach to the unit anymore.
In this case, MIDI substream should be terminated.

This commit stops MIDI transmission after the fatal error occurs.
Unfortunately, unlike ALSA PCM functionality, ALSA rawmidi core has no
feature to discontinue MIDI substream runtime in kernel side, thus this
commit just stops MIDI transmission without notifying it to userspace.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-24 16:32:08 +01:00
Takashi Sakamoto b4c23ab1cb ALSA: oxfw: retry MIDI transferring for scs1x at transaction failure
Currently, ALSA oxfw driver has a TODO to retry MIDI transferring
at transaction failure.

This commit achieves it. Current implementation uses snd_rawmidi_transmit()
to transfer messages, thus the target MIDI messages are not in buffer when
transaction failure is detected. Although we cannot use a pair of
snd_rawmidi_transmit_peek() and snd_ramwidi_transmit_ack(), the
messages are still in scs1x specific structure and the data is available
for retries.

This commit adds a member to the structure for the length of buffered
messages, and uses the value again at retries.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-24 16:31:54 +01:00
Takashi Sakamoto 99d7355914 ALSA: fireworks: serialize transactions to update connections at bus reset
In IEC 61883-1, at bus-reset, applications can continue isochronous
streaming by updating connections. In ALSA fireworks driver, the
operation is executed in 'update' handler for bus driver.

The connection resources are also changed in process contexts of PCM/MIDI
applications. Therefore, bus-reset handling has race condition
against connection. Current ALSA fireworks driver has a bug for the
condition.

This commit fixes the bug, by expand critical section with mutex. As a
result, connection updating operation in bus-reset handler and connection
changing operation in process context are serialized.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:46:38 +01:00
Takashi Sakamoto 3800e6f944 ALSA: bebob: give up updating streams at bus reset handler
DM1000/DM1100/DM1500 chipsets transfer packets with discontinue value in
'dbc' field of CIP header. For ALSA bebob driver, this makes its bus-reset
handler meaningless, because the discontinuity is detected quite earlier
than executing the handler.

This commit gives up updating streams at the bus reset handler.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:45:54 +01:00
Takashi Sakamoto 4fd6c6c729 ALSA: bebob: change type of substream counter from atomic_t to unsigned int
The counter is incremented/decremented in critical section protected with
mutex. Therefore, no need to use atomic_t.

This commit changes the type to unsigned int.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:45:38 +01:00
Takashi Sakamoto 2a71e70166 ALSA: bebob: move mutex from function callee to callers
Currently, critical section is protected by mutex in functions of
fireworks_stream.c. Callers increments/decrements substreams counter
before calling the functions. Moving mutex to the callers code allows
to change type of the substream counter from atomic_t to unsigned int.

This commit is a preparation for obsoleting usage of atomic_t for
substream counter.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:45:25 +01:00
Takashi Sakamoto 14a37ac1bf ALSA: bebob: simplify bus-reset handling
At bus-reset, DM1000/DM1100/DM1500 chipsets transfer packets with
discontinuous value in 'dbc' field of CIP header. In this case, packet
streaming layer in firewire-lib module stops streaming and set XRUN to PCM
substream.

In ALSA, PCM applications are notified the XRUN status by the return value
of ALSA PCM interface. They can recover this state by executing
snd_pcm_prepare(), then PCM drivers' prepare handler is called, and start
new PCM substream. For ALSA BeBoB driver, the handler establishes new
connections and start new AMDTP streaming.

Unfortunately, neither the PCM applications nor the driver know the reason
of XRUN. The driver gets to know the reason when update handler is called
by IEEE 1394 bus driver. As long as I tested, the order of below events are
not fixed:
 * Detecting packet discontinuity in tasklet context of OHCI 1394 driver
 * Calling prepare handler in process context of ALSA PCM application
 * Calling update handler in kthread context of IEEE 1394 bus driver

The unpredictable order is disadvantage for the driver to be compliant to
CMP. In IEC 61883-1, new CMP establish operations should be done 1 sec
(isoc_resource_delay) after bus-reset. Within 1 sec, CMP restore
operations are allowed. For this reason, in former commit ('b6bc812327aa:
ALSA: bebob/firewire-lib: Add a quirk for discontinuity at bus reset'),
the process context is forced to wait for executing update handler. The
process context wait for bus-reset up to 1 sec. This commit solves the
issue, while causes more disadvantages. For PCM applications, calling
snd_pcm_prepare() for recovering XRUN state takes more time and the driver
got a bit complicated code, while the recovery is not always successful.

As long as I tested, DM1000/DM1100/DM1500 and BeBoB firmware can allow
drivers to establish new connections just after bus reset. Furthermore,
any FCP transactions are handled correctly. Therefore, the driver don't
need to wait for bus reset handler for starting new streaming.

This commit removes the codes to reduce maintenance cost.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:45:15 +01:00
Takashi Sakamoto ea79005367 ALSA: oxfw: use workqueue instead of tasklet for scs1x
This commit replaces tasklet with workqueue for scs1x functionality of
ALSA oxfw driver.

This driver transfers MIDI message specific for SCS.1m and SCS.1d. This
task is currently done in software IRQ context of tasklet. In a view of
system, this context is limited resources and some important drivers (at
least, more important than ALSA oxfw driver) use the context as its
bottom-harf.

If the work to transfer MIDI messages is done within a time, it's better
to use the other context for the work. Actually, with recent CPUs, the
work will be scheduled within a time. This is a reason of this commit.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-18 15:18:33 +01:00
Takashi Sakamoto fbeac84dbe ALSA: dice: old firmware optimization for Dice notification
As long as I tested, Dice-based models produced by TC Electronic with
factory-configured settings transfer no notification within
ensure_phase_lock(). On the other hand, with upgraded firmwares, it
starts to transfer the notification. This seems to be a quirk of earlier
firmwares.

This commit ensures phase lock by reading a register after waiting for
the notification. Even if it's timed-out, ensure_phase_lock() return
success as long as the register has expected clock status.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-12 09:52:49 +01:00
Takashi Sakamoto aec045b80d ALSA: dice: change notification mask to detect lock status change
With former patchset, ALSA dice driver doesn't change clock parameters
anymore, while the driver still touch clock configuration for phase lock.

Although the locking status is in Dice notification, the driver doesn't
detect it. Usually, this causes no issues because in most case
NOTIFY_LOCK_CHG notification transfers after NOTIFY_CLOCK_ACCEPTED
notification, while it's better to detect locking status.

This commit changes notification mask just to detect lock status change.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-12 09:52:43 +01:00
Takashi Iwai 9b88daa513 Merge branch 'for-linus' into for-next 2016-02-09 23:08:48 +01:00
Takashi Sakamoto dfabc0eee1 ALSA: dice: ensure phase lock before starting streaming
In former commits, probing process has no need to set sampling transfer
frequency. Although it's OK to drop a function to change the frequency
from this module, some models require it before streaming. This seems to
be due to phase lock of clock source.

This commit moves the function from transaction layer to stream layer, and
rename it according to the purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:11 +01:00
Takashi Sakamoto 6f688268b3 ALSA: dice: purge generating channel cache
Dice interface design doesn't allow drivers to read supported combination
between sampling transfer frequencies and the number of Multi bit linear
audio data channels. Due to the design, ALSA dice driver changes current
sampling transfer frequency to generate cache of the combinations at
device probing processing.

Although, this idea is worse because ALSA dice driver changes the state of
clock. This is not what users want when they save favorite configuration
to the device in advance.

Furthermore, there's a possibility that the format of data block is decided
not only according to current sampling transfer frequency, but also the
other factors, i.e. data format for digital interface. It's not good to
generate channel cache according to the sampling transfer frequency only.

This commit purges processing cache data and related structure members. As
a result, users must set preferable sampling transfer frequency before
using ALSA PCM applications, as long as they want to start any PCM
substreams at the rate except for current one.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:10 +01:00
Takashi Sakamoto c30076568d ALSA: dice: get the number of MBLA data channel at opening PCM substream
This commit is a preparation to remove members related to channel cache
for the number of channels for multi bit linear audio data and MIDI
ports. This commit changes the way to get the number of multi bit linear
audio data channel. It's directly retrieved by asynchronous transactions
to some registers.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:10 +01:00
Takashi Sakamoto b9022f4d2c ALSA: dice: add MIDI ports according to current number of MIDI substreams
This commit changes the way to add ALSA MIDI ports. This driver read the
number of multiplexed MIDI substreams from hardware register, then adds the
same number of ALSA MIDI ports. This commit is based on my assumption that
the number is fixed at all of supported sampling transfer frequency.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:09 +01:00
Takashi Sakamoto 1bc8e12d94 ALSA: dice: limit stream to current sampling transfer frequency.
In previous commit, ALSA Dice driver limits PCM substreams at current
sampling transfer frequency and current number of Multi bit linear audio
data channel. Thus, the driver has no need to start AMDTP streams at
the other sampling transfer frequency except for current one. This is due
to Dice interface design.

This commit limits AMDTP stream at current sampling transfer frequency,
according to the design.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:09 +01:00
Takashi Sakamoto 0d5ee195b1 ALSA: dice: limit to current sampling transfer frequency
ALSA PCM core has a functionality for rule of PCM substream parameters.
Typically, when userspace opens PCM character devices, each driver adds
its own rules to PCM substream according to design of hardware. When the
userspace executes hw_params ioctl with favorite parameters, the actual
parameters are calculated according to the rules and the given parameters.
Then, the result is returned to userspace.

Currently, ALSA Dice driver has the rule between channels and rates, while
Dice interface design doesn't allow drivers to retrieve all of the
combinations. Dice drivers are just allowed to get current sampling
transfer frequency and the number of multi bit linear audio data channels
in an data block of an AMDTP packet.

This commit purges the rule, and limit PCM substreams to current sampling
transfer frequency, following to the interface design.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:08 +01:00
Geert Uytterhoeven b8cb3750ce ALSA: firewire-digi00x: Drop bogus const type qualifier on dot_scrt()
sound/firewire/digi00x/amdtp-dot.c:67: warning: type qualifiers ignored on function return type

Drop the bogus "const" type qualifier on the return type of dot_scrt()
to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:16:52 +01:00
Takashi Sakamoto 56661a2ed5 ALSA: firewire-tascam: remove needless member for control and status message
Commit 3beab0f844 added a member for control and status message, while
it's planned and not implemented yet.

This commit removes it.

Fixes: 3beab0f844fa('ALSA: firewire-tascam: add support for outgoing MIDI messages by asynchronous transaction')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-05 12:47:14 +01:00
Takashi Sakamoto 61ebe49964 ALSA: firewire-tascam: remove a flag for controller
Currently, 'struct snd_tscm_spec' has a member named as 'is_controller' to
identify MIDI controller. This member was originally added to skip
parse control and status messages in isochronous packets for non-controller
model.

As long as I investigate, FW-1804 (non-controller) also transfers the
control and status message, thus it becomes meaningless.

This commit removes it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-05 12:46:15 +01:00
Takashi Sakamoto 3e78e1518e ALSA: firewire-tascam: add support for FW-1804
This model supports:
 * maximum 12 PCM channels for PCM playback
 * maximum 18 PCM channels for PCM capture
 * 4 ports for MIDI playback
 * 4 ports for MIDI capture
 * control and status messages in tx isochronous packets
 * up to 96.0 kHz

This commit adds support for the model. As the other supported models,
all of available PCM channels are always enabled.

As I described in commit c0949b2785, Ilya Zimnovich had investigated
TASCAM FireWire series in 2011 with his FW-1804. In his report, this model
has internal multiplexer and any software implementation can control it.
Following to the design of ALSA firewire stack, this commit won't
implement it. It should be in userspace via Linux fw character device.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-05 12:46:07 +01:00
Takashi Sakamoto 5d2560a427 ALSA: firewire-tascam: fix NULL pointer dereference when model identification fails
When unsupported models are connected, snd-firewire-tascam module causes
NULL pointer dereference in fw_core_remove_address_handler() (due to
list_del_rcu()).

This commit prevents this bug.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-05 12:45:59 +01:00
Lucas Tanure 07905298e4 ALSA: bebob: Use a signed return type for get_formation_index
The return type "unsigned int" was used by the get_formation_index function
despite of the aspect that it will eventually return a negative	error code.
So, change to signed int and get index by reference in the parameters.

Done with the help of Coccinelle.

[Fix the missing braces suggested by Julia Lawall -- tiwai]

Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-26 11:38:53 +01:00
Takashi Sakamoto 2eb65d67af ALSA: dice: expand timeout to wait for Dice notification
Some users have reported that their Dice based models generate ETIMEDOUT
when starting PCM playback. It means that current timeout (=100msec) is
not enough for their models to transfer notifications.

This commit expands the timeout up to 2 sec. As a result, in a worst case,
any operations to start AMDTP streams takes 2 sec or more. Then, in
userspace, snd_pcm_hw_params(), snd_pcm_prepare(), snd_pcm_recover(),
snd_rawmidi_open(), snd_seq_connect_from() and snd_seq_connect_to() may
take the time.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-06 10:18:54 +01:00
Takashi Sakamoto a2875a92b8 ALSA: dice: purge transaction initialization at timeout of Dice notification
In previous commit, card registration is processed under situation
with few bus reset. There's no need to add a workaround of transaction
re-initialization at timeout.

This commit purges the re-initialization.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-06 10:18:54 +01:00
Takashi Sakamoto b59fb1900b ALSA: dice: postpone card registration
Some models based on ASIC for Dice II series (STD, CP) change their
hardware configurations after appearing on IEEE 1394 bus. This is due to
interactions of boot loader (RedBoot), firmwares (eCos) and vendor's
configurations. This causes current ALSA dice driver to get wrong
information about the hardware's capability because its probe function
runs just after detecting unit of the model.

As long as I investigated, it takes a bit time (less than 1 second) to load
the firmware after bootstrap. Just after loaded, the driver can get
information about the unit. Then the hardware is initialized according to
vendor's configurations. After, the got information becomes wrong.
Between bootstrap, firmware loading and post configuration, some bus resets
are observed.

This commit offloads most processing of probe function into workqueue and
schedules the workqueue after successive bus resets. This has an effect to
get correct hardware information and avoid involvement to bus reset storm.

For code simplicity, this change effects all of Dice-based models, i.e.
Dice II, Dice Jr., Dice Mini and Dice III.

I use a loose strategy to manage a race condition between the work and the
bus reset. This is due to a specification of dice transaction. When bus
reset occurs, registered address for the transaction is cleared. Drivers
must re-register their own address again. While, this operation is required
for the work because the work includes to wait for the transaction. This
commit uses no lock primitives for the race condition. Instead, checking
'registered' member of 'struct snd_dice' avoid executing the work again.
If sound card is not registered, the work can be scheduled again by bus
reset handler.

When .remove callback is executed, the sound card is going to be released.
The work should not be pending or executed in the releasing. This commit
uses cancel_delayed_work_sync() in .remove callback and wait till the
pending work finished. After .remove callback, .update callback is not
executed, therefore no works are scheduled again.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-06 10:18:53 +01:00
Takashi Sakamoto 4a47a87def ALSA: dice: split subaddress check from category check
Before allocating an instance of sound card, ALSA dice driver checks
chip_ID_hi in Bus information block of Config ROM, then also checks
subaddresses. The former operation reads cache of Config ROM in Linux
FireWire subsystem, while the latter operation sends read transaction.
The latter can be merged into initialization of transaction system.

This commit splits these two operations to reduce needless transactions
in probe processing.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-06 10:18:52 +01:00
Takashi Sakamoto de5126cc3c ALSA: oxfw: add stream format quirk for SCS.1 models
As long as I investigate SCS.1m, this model reports to transfer/receive
PCM data channels/MIDI conformant data channels in tx/rx AMDTP packet.
There's a contradiction that this model actually has no analog/digital
capture port for PCM frames and no physical MIDI ports.

I guess that SCS.1d also has the contradiction. This model has no
analog/digital ports for PCM frames and no physical MIDI ports, thus it
requires no streaming functionality.

This commit adds some modification codes to handle the contradiction,
as much as possible. Unfortunately, this module adds one PCM playback
substream for SCS.1d so as SCS.1m.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:32 +01:00
Takashi Sakamoto 9e2004f9ce ALSA: oxfw: obsolete scs1x module
Now ALSA oxfw driver gains functionalities which scs1x module has.

This commit obsoletes the scs1x module, and adds a line of MODULE_ALIAS
to load oxfw module instead of scs1x module.

In scs1x module, the name of 'shortname' field is fixed as 'SCS1x'. This
field is used to name MIDI ports for both of SCS.1m and SCS.1d. This is
not good because typically some SCS.1m and SCS.1d are used in the same
system. It's better to distinguish them according to name of the ports.
This commit applies model name in config ROM to the 'shortname'.

For the name of 'driver' and 'longname', this commit uses the same way
applied to the other models. This change may not bring disadvantages to
users because userspace applications use ALSA rawmidi or seq interface
and these interfaces are not influenced by them directly.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:31 +01:00
Takashi Sakamoto 6f5dcb28df ALSA: oxfw: add MIDI playback port for SCS.1 models
This commit adds MIDI playback ports so that scs1x driver has.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:31 +01:00
Takashi Sakamoto d7d20e7781 ALSA: oxfw: copy handlers of asynchronous transaction for MIDI playback
This commit copies some functions of asynchronous transactions for MIDI
playback, to merge scs1x module. The features of payload in asynchronous
transaction are the same as captured MIDI messages.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:30 +01:00
Takashi Sakamoto 8250427dc1 ALSA: oxfw: add MIDI capture port for SCS.1 models
This commit adds MIDI capture so that scs1x driver has.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:29 +01:00
Takashi Sakamoto 13b8b78c7f ALSA: oxfw: copy handlers of asynchronous transaction for MIDI capture
This commit copies some functions of asynchronous transactions for MIDI
capture, to merge scs1x module. The features of payload in asynchronous
transaction are:

 * System exclusive messages for SCS.1 are encoded without ID data. In
   this encoding scheme, 4 bits in LSB are available. The bits are squashed
   in payload byte. Thus, one payload byte transfers two MIDI messages.
 * The first byte of payload byte means:
  * 0x00: depending on second payload byte
   * 0xf9: including escaped system exclusive messages for SCS.1, up to
     3 byte (= 6 MIDI messages)
   * the others: including MIDI 1.0 messages
  * the others: including escaped system exclusive messages for SCS.1, up
    to 64 bytes

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:29 +01:00
Takashi Sakamoto e3315b439c ALSA: oxfw: allocate own address region for SCS.1 series
When physical controls on SCS.1 models are operated, the models transfer
MIDI messages in asynchronous transactions on IEEE 1394 bus. The models
have a register to have an address for the transactions, and drivers
can register own address for this purpose.

This commit keeps a region of address, registers it and adds a handler for
the transactions.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:28 +01:00
Takashi Sakamoto 3f47152a1c ALSA: oxfw: add scs1x layer
Stanton Controllers and Systems 1 (SCS.1) series is supported by ALSA
scs1x driver. This driver just supports MIDI functionality. On the other
hand, models in this series are based on OXFW971 and ALSA OXFW driver can
support them.

SCS.1 series has MIDI functionality to control its surface state such as
LED lighting. When operating physical knobs and faders, the models
generate MIDI messages. These MIDI messages are transferred by asynchronous
transactions. These transactions are really model-specific and ALSA OXFW
driver requires the functionality so as scs1x module implements.

This commit adds scs1x layer as a preparation to merge scs1x driver to
oxfw driver.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:27 +01:00
Takashi Sakamoto d6ce6bbd7d ALSA: oxfw: rename a structure so that it means backward compatibility to old drivers
In former commits, some model-specific members are split from the
structure. The structure is just to keep names for compatibility to old
drivers.

This commit arranges name of the structure and localize it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:50:31 +01:00
Takashi Sakamoto 3e2f45708e ALSA: oxfw: move model-specific parameters from common structure
In previous commit, some members are moved from 'struct snd_oxfw' because
they're model-specific. There are also the other model-specific parameters
in 'struct device_info'.

This commit moves these members to model-specific structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:50:31 +01:00
Takashi Sakamoto 40540de503 ALSA: oxfw: move model-specific members from common structure
Currently, 'struct snd_oxfw' has some members for models supported by old
firewire-speakers driver, while these members are useless to the other
models.

This commit allocates new memory block and moves these members to
model-specific structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:50:30 +01:00
Takashi Sakamoto c582cc66b9 ALSA: oxfw: enable to keep memory block for model-specific structure
ALSA oxfw driver should have backward compatibility to old
firewire-speakers driver. Additionally, in future commit, scs1x driver
will be merged. It's nice to add a pointer to have a memory block for
model-specific structures.

This commit adds a member to 'struct snd_oxfw' for this aim. Deallocation
is done at freeing ALSA card structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:50:29 +01:00
Takashi Iwai f2777c1344 Merge branch 'topic/firewire-update' into for-next 2015-12-16 12:09:10 +01:00
Takashi Sakamoto 5ce8cc4844 ALSA: oxfw: gather model-dependent conditions to a function
Adding control elements is just for models supported by old
firewire-speakers modules. The processing should be in a function to add
model-dependent quirk.

This commit moves the codes to the function. As a result, the function
should handle error state, thus this commit also changes prototype of
the function.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15 16:30:05 +01:00
Takashi Sakamoto 27e6663501 ALSA: oxfw: reuse driver entry to detect quirks
Currently, assignment to model-dependent quirk is corresponding to
asynchronous transactions on IEEE 1394 bus. This is also achieved with
device entry.

This commit changes the processing of model-dependent quirk with the
entry. As a result, the transactions are sent only for Loud models.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15 16:30:04 +01:00
Takashi Sakamoto eab8e4e461 ALSA: oxfw: change function prototype for AV/C Audio Subunit command
ALSA OXFW driver uses AV/C Audio Subunit commands to control some models.
The commands get/set the state of Feature function block of the subunit.
The commands are not specific to OXFW, thus there's a possibility to use
them in the other drivers.

Currently, helper functions for the commands require 'struct snd_oxfw',
although, it's not necessarily required. It's better to change prototype
of the functions without the structure for future use.

This commit changes the prototype.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15 16:30:04 +01:00