Commit Graph

26 Commits

Author SHA1 Message Date
Bob Liu b5affb0147 blackfin: add bf60x to current framework
This patch added bf60x to current blackfin kernel framework.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21 14:54:12 +08:00
Mike Frysinger fb1d9be596 Blackfin: optimize double fault boot checking
This moves the double fault data used at boot time into a single struct
which can then easily be addressed with indexed loads rather than having
to explicitly load multiple addresses.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:43 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Mike Frysinger 511cdcc500 Blackfin: optimize startup code
Take advantage of more Blackfin-specific insns, and only initialize
registers required by the ABI.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 04:01:04 -04:00
Barry Song d86bfb1600 Blackfin: initial XIP support
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Barry Song aad16f3228 Blackfin: fix initial stack pointer setup
During very early init, the stack pointer is given a slightly incorrect
value (&init_thread_union).  The value is later adjusted to the right one
during early init (&init_thread_union + THREAD_SIZE), but it is used a few
times in between.  While the few functions used don't actually put things
onto the stack (due to optimization), it's best if we simply use the right
value from the start.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:48 -05:00
Robin Getz 96f1050d3d Blackfin: mass clean up of copyright/licensing info
Bill Gatliff & David Brownell pointed out we were missing some
copyrights, and licensing terms in some of the files in
./arch/blackfin, so this fixes things, and cleans them up.

It also removes:
 - verbose GPL text(refer to the top level ./COPYING file)
 - file names (you are looking at the file)
 - bug url (it's in the ./MAINTAINERS file)
 - "or later" on GPL-2, when we did not have that right

It also allows some Blackfin-specific assembly files to be under a BSD
like license (for people to use them outside of Linux).

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07 04:36:26 -04:00
Graf Yang 01b9f4b0ed Blackfin: improve double fault debug handling
Since the hardware only provides reporting for the last exception handled,
and the values are valid only when executing the exception handler, we
need to save the context for reporting at a later point.  While we do this
for one exception, it doesn't work properly when handling a second one as
the original exception is clobbered by the double fault.  So when double
fault debugging is enabled, create a dedicated shadow of these values and
save/restore out of there.  Now the crash report properly displays the
first exception as well as the second one.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:57 -04:00
Robin Getz 837ec2d56c Blackfin: catch hardware errors earlier during booting
Allow hardware errors to be caught during early portions of booting, and
leave something in the shadow console that people can use to debug their
system with (to be printed out by the bootloader on next reset).

This enables the hardare error interrupts in head.S, allowing us to find
hardware errors when they happen (well, as much as you can with a hardware
error) and prints out the trace if it is enabled.  This will catch errors
(like booting the wrong image on a 533) which previously resulted in a
infinite loop/hang, as well as random hardware errors before before
setup_arch().

To disable this debug only feature - turn off EARLY_PRINTK.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16 21:31:44 -04:00
Mike Frysinger 37082511f0 Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT
Commit 6b3087c6 (which introduced Blackfin SMP) broke command line passing
when the DEBUG_DOUBLEFAULT config option was enabled.  Switch the code to
using a scratch register and not R7 which holds the command line.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:52 -04:00
Mike Frysinger 729a3fa733 Blackfin: workaround anomaly 05000227
Workaround anomaly 05000227 by only using the scratch pad for stack when
absolutely necessary.  The core code which reprograms clocks really only
touches MMRs directly with constants.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12 06:11:32 -04:00
Graf Yang 9960aa6a07 Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2
bss_l2 section is garbage when the data in this section is used by
_bfin_relocate_l1_mem, so move the zero out function ahead.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04 16:49:45 +08:00
Michael Hennerich 73feb5c09d Blackfin arch: fix bugs and unify BFIN_KERNEL_CLOCK option
- remove duplicated code and headers
 - add option allowing arbitrary SDRAM/DDR Timing parameters.
 - mark automatically calculated timings as EXPERIMENTAL
 - fix comment header block

Related to BUGs:
 - kernel boot up fails with CONFIG_BFIN_KERNEL_CLOCK item on.
 - kernel does not boot if re-program clocks

[ Mike Frysinger <vapier.adi@gmail.com>
 - fix comment header
 - mark do_sync static
 - document the DMA shutdown
 - simplify SIC_IWR handling
 - fix ANOMALY_05000265 handling to work as intended ]

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Graf Yang 6b3087c64a Blackfin arch: SMP supporting patchset: Blackfin header files and machine common code
Blackfin dual core BF561 processor can support SMP like features.
https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like

In this patch, we provide SMP extend to Blackfin header files
and machine common code

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07 23:14:39 +08:00
Mike Frysinger 9f20cf2527 Blackfin arch: do not bother initializing the first 4k
our kernel should be sane now, and we want to catch NULL bugs,
not ignore them

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Mike Frysinger c2414bd0b1 Blackfin arch: use sti to set the mask rather than banging on imask
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 17:48:22 +08:00
Mike Frysinger f940260a98 Blackfin arch: unify duplicated bss init code
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-27 18:17:41 +08:00
Graf Yang b4f5c58fd1 Blackfin arch: Zero out bss region in L1/L2 memory.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-16 22:50:46 +08:00
Robin Getz 9df10281e1 Blackfin arch: Use DTEST rather than DMA to poke at L1 SRAM during exception context
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08 18:03:33 +08:00
Graf Yang 5b04f271fe Blackfin arch: Modify some funtion names to more genernal ones
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08 17:32:57 +08:00
Robin Getz 0c7a6b2135 Blackfin arch: add supporting for double fault debug handling
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08 16:27:12 +08:00
Mike Frysinger 7e1e7aed0c Blackfin arch: do not muck with the UART during boot -- let the serial driver worry about it
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14 15:15:43 +08:00
Robin Getz cd8fb8df14 Blackfin arch: Print out doublefault addresses, so debug can occur
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14 14:44:33 +08:00
Mike Frysinger 17e89bcfa1 Blackfin arch: unify the duplicated portions of __start and split mach-specific pieces into _mach_early_start where they will be easier to trim over time
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-06 17:23:50 +08:00
Mike Frysinger 67618fd874 Blackfin arch: add asm/thread_info.h for THREAD_SIZE define
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-06 17:18:31 +08:00
Mike Frysinger 09e1f70e31 Blackfin arch: unify the duplicated _real_start functions
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-06 17:15:27 +08:00