Commit Graph

46 Commits

Author SHA1 Message Date
David S. Miller 5d9efa7ee9 ipv6: Remove privacy config option.
The code for privacy extentions is very mature, and making it
configurable only gives marginal memory/code savings in exchange
for obfuscation and hard to read code via CPP ifdef'ery.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 20:07:50 -04:00
Steffen Klassert ed1efb2aef ipv6: Add support for IPsec virtual tunnel interfaces
This patch adds IPv6  support for IPsec virtual tunnel interfaces
(vti). IPsec virtual tunnel interfaces provide a routable interface
for IPsec tunnel endpoints.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-10 12:00:01 +02:00
Pravin B Shelar f61dd388a9 Tunneling: use IP Tunnel stats APIs.
Use common function get calculate rtnl_link_stats64 stats.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26 12:27:19 -04:00
Linus Torvalds 7c2db36e73 Merge branch 'akpm' (incoming from Andrew)
Merge misc patches from Andrew Morton:

 - Florian has vanished so I appear to have become fbdev maintainer
   again :(

 - Joel and Mark are distracted to welcome to the new OCFS2 maintainer

 - The backlight queue

 - Small core kernel changes

 - lib/ updates

 - The rtc queue

 - Various random bits

* akpm: (164 commits)
  rtc: rtc-davinci: use devm_*() functions
  rtc: rtc-max8997: use devm_request_threaded_irq()
  rtc: rtc-max8907: use devm_request_threaded_irq()
  rtc: rtc-da9052: use devm_request_threaded_irq()
  rtc: rtc-wm831x: use devm_request_threaded_irq()
  rtc: rtc-tps80031: use devm_request_threaded_irq()
  rtc: rtc-lp8788: use devm_request_threaded_irq()
  rtc: rtc-coh901331: use devm_clk_get()
  rtc: rtc-vt8500: use devm_*() functions
  rtc: rtc-tps6586x: use devm_request_threaded_irq()
  rtc: rtc-imxdi: use devm_clk_get()
  rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug()
  rtc: rtc-pcf8583: use dev_warn() instead of printk()
  rtc: rtc-sun4v: use pr_warn() instead of printk()
  rtc: rtc-vr41xx: use dev_info() instead of printk()
  rtc: rtc-rs5c313: use pr_err() instead of printk()
  rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug()
  rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug()
  rtc: rtc-ds2404: use dev_err() instead of printk()
  rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk()
  ...
2013-02-21 17:38:49 -08:00
Christian Kujau 242260fb85 sun.com documentation fixes
After I came across a help text for SUNGEM mentioning a broken sun.com
URL, I felt like fixing those up, as they are now pointing to oracle.com
URLs.

Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:20 -08:00
Kees Cook f9ceb16ec4 net/ipv6: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: "David S. Miller" <davem@davemloft.net>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
CC: James Morris <jmorris@namei.org>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
2013-01-11 11:40:01 -08:00
xeb@mail.ru c12b395a46 gre: Support GRE over IPv6
GRE over IPv6 implementation.

Signed-off-by: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14 14:28:32 -07:00
Jan Beulich 7e15252498 xfrm: make xfrm_algo.c a module
By making this a standalone config option (auto-selected as needed),
selecting CRYPTO from here rather than from XFRM (which is boolean)
allows the core crypto code to become a module again even when XFRM=y.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15 13:13:34 -04:00
Patrick McHardy d1db275dd3 ipv6: ip6mr: support multiple tables
This patch adds support for multiple independant multicast routing instances,
named "tables".

Userspace multicast routing daemons can bind to a specific table instance by
issuing a setsockopt call using a new option MRT6_TABLE. The table number is
stored in the raw socket data and affects all following ip6mr setsockopt(),
getsockopt() and ioctl() calls. By default, a single table (RT6_TABLE_DFLT)
is created with a default routing rule pointing to it. Newly created pim6reg
devices have the table number appended ("pim6regX"), with the exception of
devices created in the default table, which are named just "pim6reg" for
compatibility reasons.

Packets are directed to a specific table instance using routing rules,
similar to how regular routing rules work. Currently iif, oif and mark
are supported as keys, source and destination addresses could be supported
additionally.

Example usage:

- bind pimd/xorp/... to a specific table:

uint32_t table = 123;
setsockopt(fd, SOL_IPV6, MRT6_TABLE, &table, sizeof(table));

- create routing rules directing packets to the new table:

# ip -6 mrule add iif eth0 lookup 123
# ip -6 mrule add oif eth0 lookup 123

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-05-11 14:40:55 +02:00
Alexandre Cassen 8a6dfd43d1 IPv6: Fix 6RD typo
Following fix a small typo.

Signed-off-by: Alexandre Cassen <acassen@freebox.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 14:50:30 -07:00
YOSHIFUJI Hideaki / 吉藤英明 fa857afcf7 ipv6 sit: 6rd (IPv6 Rapid Deployment) Support.
IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon
mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly
deploy IPv6 unicast service to IPv4 sites to which it provides
customer premise equipment.  Like 6to4, it utilizes stateless IPv6 in
IPv4 encapsulation in order to transit IPv4-only network
infrastructure.  Unlike 6to4, a 6rd service provider uses an IPv6
prefix of its own in place of the fixed 6to4 prefix.

With this option enabled, the SIT driver offers 6rd functionality by
providing additional ioctl API to configure the IPv6 Prefix for in
stead of static 2002::/16 for 6to4.

Original patch was done by Alexandre Cassen <acassen@freebox.fr>
based on old Internet-Draft.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 01:07:37 -07:00
Pavel Machek 4737f0978d trivial: Kconfig: .ko is normally not included in module names
.ko is normally not included in Kconfig help, make it consistent.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:50 +02:00
Matt LaPlante 692105b8ac trivial: fix typos/grammar errors in Kconfig texts
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:01 +02:00
Herbert Xu 6fccab671f ipsec: ipcomp - Merge IPComp implementations
This patch merges the IPv4/IPv6 IPComp implementations since most
of the code is identical.  As a result future enhancements will no
longer need to be duplicated.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-25 02:54:40 -07:00
David S. Miller 5c5d6dabb7 Revert "ipv6: Fix typo in net/ipv6/Kconfig"
This reverts commit 5b3f129c55.

As requested by Maciej W. Rozycki.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-27 14:26:50 -07:00
Michael Beasley 5b3f129c55 ipv6: Fix typo in net/ipv6/Kconfig
Two is used in the wrong context here, as you are connecting to an
IPv6 network over IPv4; not connecting two IPv6 networks to an IPv4
one.

Signed-off-by: Michael Beasley <youvegotmoxie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24 23:50:30 -07:00
Jan Engelhardt 0b18542b7f [NET]: Sink IPv6 menuoptions into its own submenu
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-13 23:30:47 -07:00
David S. Miller 8eefca4888 Merge branch 'net-2.6.26-isatap-20080403' of git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-dev 2008-04-08 02:33:36 -07:00
YOSHIFUJI Hideaki 14fb64e1f4 [IPV6] MROUTE: Support PIM-SM (SSM).
Based on ancient patch by Mickael Hoerdt
<hoerdt@clarinet.u-strasbg.fr>, which is available at
<http://www-r2.u-strasbg.fr/~hoerdt/dev/linux_ipv6_mforwarding/patch-linux-ipv6-mforwarding-0.1a>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-05 22:33:39 +09:00
YOSHIFUJI Hideaki 7bc570c8b4 [IPV6] MROUTE: Support multicast forwarding.
Based on ancient patch by Mickael Hoerdt
<hoerdt@clarinet.u-strasbg.fr>, which is available at
<http://www-r2.u-strasbg.fr/~hoerdt/dev/linux_ipv6_mforwarding/patch-linux-ipv6-mforwarding-0.1a>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-05 22:33:38 +09:00
YOSHIFUJI Hideaki de357cc013 [IPV6] NDISC: Don't rely on node-type hint from L2 unless required.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-03 10:06:01 +09:00
YOSHIFUJI Hideaki 38fe999e22 [IPV6] KCONFIG: Fix description about IPV6_TUNNEL.
Based on notice from "Colin" <colins@sjtu.edu.cn>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-20 16:13:58 -07:00
Herbert Xu ed58dd41f3 [ESP]: Add select on AUTHENC
Now the ESP uses the AEAD interface even for algorithms which are
not combined mode, we need to select CONFIG_CRYPTO_AUTHENC as
otherwise only combined mode algorithms will work.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04 14:29:21 -08:00
Herbert Xu 38320c70d2 [IPSEC]: Use crypto_aead and authenc in ESP
This patch converts ESP to use the crypto_aead interface and in particular
the authenc algorithm.  This lays the foundations for future support of
combined mode algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:02 -08:00
Masahide NAKAMURA 59fbb3a61e [IPV6] MIP6: Loadable module support for MIPv6.
This patch makes MIPv6 loadable module named "mip6".

Here is a modprobe.conf(5) example to load it automatically
when user application uses XFRM state for MIPv6:

alias xfrm-type-10-43 mip6
alias xfrm-type-10-60 mip6

Some MIPv6 feature is not included by this modular, however,
it should not be affected to other features like either IPsec
or IPv6 with and without the patch.
We may discuss XFRM, MH (RAW socket) and ancillary data/sockopt
separately for future work.

Loadable features:
* MH receiving check (to send ICMP error back)
* RO header parsing and building (i.e. RH2 and HAO in DSTOPTS)
* XFRM policy/state database handling for RO

These are NOT covered as loadable:
* Home Address flags and its rule on source address selection
* XFRM sub policy (depends on its own kernel option)
* XFRM functions to receive RO as IPv6 extension header
* MH sending/receiving through raw socket if user application
  opens it (since raw socket allows to do so)
* RH2 sending as ancillary data
* RH2 operation with setsockopt(2)

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:15:42 -07:00
Neil Horman 95c385b4d5 [IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support.
Nominally an autoconfigured IPv6 address is added to an interface in the
Tentative state (as per RFC 2462).  Addresses in this state remain in this
state while the Duplicate Address Detection process operates on them to
determine their uniqueness on the network.  During this period, these
tentative addresses may not be used for communication, increasing the time
before a node may be able to communicate on a network.  Using Optimistic
Duplicate Address Detection, autoconfigured addresses may be used
immediately for communication on the network, as long as certain rules are
followed to avoid conflicts with other nodes during the Duplicate Address
Detection process.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:23:43 -07:00
Kazunori MIYAZAWA c73cb5a2d6 [IPSEC]: make sit use the xfrm4_tunnel_register
This patch makes sit use xfrm4_tunnel_register instead of
inet_add_protocol. It solves conflict of sit device with
inter address family IPsec tunnel.

Signed-off-by: Kazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-13 12:55:25 -08:00
Thomas Graf 47dcf0cb10 [NET]: Rethink mark field in struct flowi
Now that all protocols have been made aware of the mark
field it can be moved out of the union thus simplyfing
its usage.

The config options in the IPv4/IPv6/DECnet subsystems
to enable respectively disable mark based routing only
obfuscate the code with ifdefs, the cost for the
additional comparison in the flow key is insignificant,
and most distributions have all these options enabled
by default anyway. Therefore it makes sense to remove
the config options and enable mark based routing by
default.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:39 -08:00
Ville Nuorvala 264e91b68a [IPV6]: Make IPV6_SUBTREES depend on IPV6_MULTIPLE_TABLES.
As IPV6_SUBTREES can't work without IPV6_MULTIPLE_TABLES have IPV6_SUBTREES
depend on it.

Signed-off-by: Ville Nuorvala <vnuorval@tcs.hut.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18 19:55:29 -07:00
Joerg Roedel 989e5b96e1 [IPV6]: Seperate sit driver to extra module
This patch removes the driver of the IPv6-in-IPv4 tunnel driver (sit)
from the IPv6 module. It adds an option to Kconfig which makes it
possible to compile it as a seperate module.

Signed-off-by: Joerg Roedel <joro-lkml@zlug.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-11 23:59:50 -07:00
Diego Beltrami 0a69452cb4 [XFRM]: BEET mode
This patch introduces the BEET mode (Bound End-to-End Tunnel) with as
specified by the ietf draft at the following link:

http://www.ietf.org/internet-drafts/draft-nikander-esp-beet-mode-06.txt

The patch provides only single family support (i.e. inner family =
outer family).

Signed-off-by: Diego Beltrami <diego.beltrami@gmail.com>
Signed-off-by: Miika Komu     <miika@iki.fi>
Signed-off-by: Herbert Xu     <herbert@gondor.apana.org.au>
Signed-off-by: Abhinav Pathak <abhinav.pathak@hiit.fi>
Signed-off-by: Jeff Ahrenholz <ahrenholz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04 00:31:09 -07:00
YOSHIFUJI Hideaki 75bff8f023 [IPV6] ROUTE: Routing by FWMARK.
Based on patch by Jean Lorchat <lorchat@sfc.wide.ad.jp>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22 15:18:00 -07:00
Masahide NAKAMURA ee53826801 [IPV6]: Add Kconfig to enable Mobile IPv6.
Add Kconfig to enable Mobile IPv6.
Based on MIPL2 kernel patch.

Signed-off-by: Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>
Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-09-22 15:06:46 -07:00
Masahide NAKAMURA 1d71627d69 [XFRM] STATE: Introduce route optimization mode.
Route optimization is used with routing header and destination options
header for Mobile IPv6.

At outbound it makes header space like IPsec transport. At inbound it
does nothing because exhdrs.c functions have responsibility to update
skbuff information for these headers.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:06:37 -07:00
YOSHIFUJI Hideaki 4e96c2b418 [IPV6] KCONFIG: Add subtrees support.
This is for developers only.
Based on MIPL2 kernel patch.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Ville Nuorvala <vnuorval@tcs.hut.fi
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:55:55 -07:00
Thomas Graf 101367c2f8 [IPV6]: Policy Routing Rules
Adds support for policy routing rules including a new
local table for routes with a local destination.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:41 -07:00
Thomas Graf c71099acce [IPV6]: Multiple Routing Tables
Adds the framework to support multiple IPv6 routing tables.
Currently all automatically generated routes are put into the
same table. This could be changed at a later point after
considering the produced locking overhead.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:39 -07:00
Herbert Xu 6b7326c849 [IPSEC] ESP: Use block ciphers where applicable
This patch converts IPSec/ESP to use the new block cipher type where
applicable.  Similar to the HMAC conversion, existing algorithm names
have been kept for compatibility.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-09-21 11:46:14 +10:00
Herbert Xu b59f45d0b2 [IPSEC] xfrm: Abstract out encapsulation modes
This patch adds the structure xfrm_mode.  It is meant to represent
the operations carried out by transport/tunnel modes.

By doing this we allow additional encapsulation modes to be added
without clogging up the xfrm_input/xfrm_output paths.

Candidate modes include 4-to-6 tunnel mode, 6-to-4 tunnel mode, and
BEET modes.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:28:39 -07:00
Herbert Xu d2acc3479c [INET]: Introduce tunnel4/tunnel6
Basically this patch moves the generic tunnel protocol stuff out of
xfrm4_tunnel/xfrm6_tunnel and moves it into the new files of tunnel4.c
and tunnel6 respectively.

The reason for this is that the problem that Hugo uncovered is only
the tip of the iceberg.  The real problem is that when we removed the
dependency of ipip on xfrm4_tunnel we didn't really consider the module
case at all.

For instance, as it is it's possible to build both ipip and xfrm4_tunnel
as modules and if the latter is loaded then ipip simply won't load.

After considering the alternatives I've decided that the best way out of
this is to restore the dependency of ipip on the non-xfrm-specific part
of xfrm4_tunnel.  This is acceptable IMHO because the intention of the
removal was really to be able to use ipip without the xfrm subsystem.
This is still preserved by this patch.

So now both ipip/xfrm4_tunnel depend on the new tunnel4.c which handles
the arbitration between the two.  The order of processing is determined
by a simple integer which ensures that ipip gets processed before
xfrm4_tunnel.

The situation for ICMP handling is a little bit more complicated since
we may not have enough information to determine who it's for.  It's not
a big deal at the moment since the xfrm ICMP handlers are basically
no-ops.  In future we can deal with this when we look at ICMP caching
in general.

The user-visible change to this is the removal of the TUNNEL Kconfig
prompts.  This makes sense because it can only be used through IPCOMP
as it stands.

The addition of the new modules shouldn't introduce any problems since
module dependency will cause them to be loaded.

Oh and I also turned some unnecessary pskb's in IPv6 related to this
patch to skb's.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:46 -08:00
YOSHIFUJI Hideaki 70ceb4f539 [IPV6]: ROUTE: Add experimental support for Route Information Option in RA (RFC4191).
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 17:06:24 -08:00
YOSHIFUJI Hideaki ebacaaa0fd [IPV6]: ROUTE: Add support for Router Preference (RFC4191).
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 17:04:53 -08:00
YOSHIFUJI Hideaki 955189efb4 [IPV6]: ADDRCONF: Use our standard algorithm for randomized ifid.
RFC 3041 describes an algorithm to generate random interface
identifier.  In RFC 3041bis, it is allowed to use different
algorithm than one described in RFC 3041.

So, let's use our standard pseudo random algorithm to simplify
our implementation.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 16:54:09 -08:00
Patrick McHardy 0303770deb [NET]: Make ipip/ip6_tunnel independant of XFRM
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-19 14:03:34 -07:00
Sam Ravnborg 6a2e9b738c [NET]: move config options out to individual protocols
Move the protocol specific config options out to the specific protocols.
With this change net/Kconfig now starts to become readable and serve as a
good basis for further re-structuring.

The menu structure is left almost intact, except that indention is
fixed in most cases. Most visible are the INET changes where several
"depends on INET" are replaced with a single ifdef INET / endif pair.

Several new files were created to accomplish this change - they are
small but serve the purpose that config options are now distributed
out where they belongs.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 21:13:56 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00