Commit Graph

14935 Commits

Author SHA1 Message Date
Thomas Huth 7cc851039d powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call
If we do not provide the PVR for POWER8NVL, a guest on this system
currently ends up in PowerISA 2.06 compatibility mode on KVM, since QEMU
does not provide a generic PowerISA 2.07 mode yet. So some new
instructions from POWER8 (like "mtvsrd") get disabled for the guest,
resulting in crashes when using code compiled explicitly for
POWER8 (e.g. with the "-mcpu=power8" option of GCC).

Fixes: ddee09c099 ("powerpc: Add PVR for POWER8NVL processor")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-01 13:47:34 +10:00
Aneesh Kumar K.V 157d4d0620 powerpc/mm/radix: Add missing tlb flush
This should not have any impact on hash, because hash does tlb
invalidate with every pte update and we don't implement
flush_tlb_* functions for hash. With radix we should make an explicit
call to flush tlb outside pte update.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-01 13:47:34 +10:00
Aneesh Kumar K.V dc47c0c1f8 powerpc/mm/hash: Fix the reference bit update when handling hash fault
When we converted the asm routines to C functions, we missed updating
HPTE_R_R based on _PAGE_ACCESSED. ASM code used to copy over the lower
bits from pte via.

andi.	r3,r30,0x1fe		/* Get basic set of flags */

We also update the code such that we won't update the Change bit ('C'
bit) always. This was added by commit c5cf0e30bf ("powerpc: Fix
buglet with MMU hash management").

With hash64, we need to make sure that hardware doesn't do a pte update
directly. This is because we do end up with entries in TLB with no hash
page table entry. This happens because when we find a hash bucket full,
we "evict" a more/less random entry from it. When we do that we don't
invalidate the TLB (hpte_remove) because we assume the old translation
is still technically "valid". For more info look at commit
0608d692463("powerpc/mm: Always invalidate tlb on hpte invalidate and
update").

Thus it's critical that valid hash PTEs always have reference bit set
and writeable ones have change bit set. We do this by hashing a
non-dirty linux PTE as read-only and always setting _PAGE_ACCESSED (and
thus R) when hashing anything else in. Any attempt by Linux at clearing
those bits also removes the corresponding hash entry.

Commit 5cf0e30bf3d8 did that for 'C' bit by enabling 'C' bit always.
We don't really need to do that because we never map a RW pte entry
without setting 'C' bit. On READ fault on a RW pte entry, we still map
it READ only, hence a store update in the page will still cause a hash
pte fault.

This patch reverts the part of commit c5cf0e30bf ("[PATCH] powerpc:
Fix buglet with MMU hash management") and retain the updatepp part.

- If we hit the updatepp path on native, the old code without that
  commit, would fail to set C bcause native_hpte_updatepp()
  was implemented to filter the same bits as H_PROTECT and not let C
  through thus we would "upgrade" a RO HPTE to RW without setting C
  thus causing the bug. So the real fix in that commit was the change
  to native_hpte_updatepp

Fixes: 89ff725051 ("powerpc/mm: Convert __hash_page_64K to C")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-01 13:47:34 +10:00
Aneesh Kumar K.V d6c886006c powerpc/mm/radix: Update LPCR only if it is powernv
LPCR cannot be updated when running in guest mode.

Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-01 13:47:34 +10:00
Thomas Huth 8dd75ccb57 powerpc: Use privileged SPR number for MMCR2
We are already using the privileged versions of MMCR0, MMCR1
and MMCRA in the kernel, so for MMCR2, we should better use
the privileged versions, too, to be consistent.

Fixes: 240686c136 ("powerpc: Initialise PMU related regs on Power8")
Cc: stable@vger.kernel.org # v3.10+
Suggested-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-31 20:08:32 +10:00
Thomas Huth d23fac2b27 powerpc: Fix definition of SIAR and SDAR registers
The SIAR and SDAR registers are available twice, one time as SPRs
780 / 781 (unprivileged, but read-only), and one time as the SPRs
796 / 797 (privileged, but read and write). The Linux kernel code
currently uses the unprivileged  SPRs - while this is OK for reading,
writing to that register of course does not work.
Since the KVM code tries to write to this register, too (see the mtspr
in book3s_hv_rmhandlers.S), the contents of this register sometimes get
lost for the guests, e.g. during migration of a VM.
To fix this issue, simply switch to the privileged SPR numbers instead.

Cc: stable@vger.kernel.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-31 20:07:56 +10:00
Russell Currey bd000b82e8 powerpc/pseries/eeh: Refactor the configure_bridge RTAS tokens
The RTAS calls "ibm,configure-pe" and "ibm,configure-bridge" perform the
same actions, however the former can skip configuration if unnecessary.
The existing code treats them as different tokens even though only one
will ever be called.  Refactor this by making a single token that is
assigned during init.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-30 13:50:12 +10:00
Russell Currey 871e178e0f powerpc/pseries/eeh: Handle RTAS delay requests in configure_bridge
In the "ibm,configure-pe" and "ibm,configure-bridge" RTAS calls, the
spec states that values of 9900-9905 can be returned, indicating that
software should delay for 10^x (where x is the last digit, i.e. 990x)
milliseconds and attempt the call again. Currently, the kernel doesn't
know about this, and respecting it fixes some PCI failures when the
hypervisor is busy.

The delay is capped at 0.2 seconds.

Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-30 13:50:04 +10:00
Linus Torvalds 315227f6da DAX error handling for 4.7
- Until now, dax has been disabled if media errors were found on
   any device. This enables the use of DAX in the presence of these
   errors by making all sector-aligned zeroing go through the driver.
 - The driver (already) has the ability to clear errors on writes that
   are sent through the block layer using 'DSMs' defined in ACPI 6.1.
 
 Other misc changes:
 
 - When mounting DAX filesystems, check to make sure the partition
   is page aligned. This is a requirement for DAX, and previously, we
   allowed such unaligned mounts to succeed, but subsequent reads/writes
   would fail.
 
 - Misc/cleanup fixes from Jan that remove unused code from DAX related to
   zeroing, writeback, and some size checks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXQ4GKAAoJEHr6Yb6juE3/zowP/iclIhgXXXMQJRUHJlePMXC8
 15sGZ32JS1ak9g7vrsmNVEDNynfNtiMYdBxtUyRuj6xqgwdZvFk3F55KOCPtaeA1
 +yADkgeRkTAcwzmHw9WQVEzBCqyzSisdrwtEfH817qdq9FJdH66x2Kos6i+HeAVr
 5Q/e4gs7lKrjf384/QBl+wxNZOndJaQAPd2VRHQqx2A9F33v0ljdwRaUG1r4fjK2
 dtmhcZCqdQyuAGXW3piTnZc5ZFc3DPqO4FkEfqkEK3lFOflK0fd8wMsAZRp/Jd0j
 GJsgnVSWSqG0Dz476djlG0w8t2p5Jv1g9cKChV+ZZEdFLKWHCOUFqXNj8uI8I4k5
 cOEKCHyJ3IwfSHhNQqktEWrQN4T8ZXhWtuc9GuV4UZYuqJqHci6EdR/YsWsJjV+L
 lm/qvK4ipDS1pivxOy8KX/iN0z7Io8J9GXpStDx3g8iWjLlh4YYlbJLWeeRepo/z
 aPlV/QAKcHiGY6jzLExrZIyCWkzwo6O+0p1Kxerv9/7K/32HWbOodZ+tC8eD+N25
 pV69nCGf+u50T2TtIx1+iann4NC1r7zg5yqnT9AgpyZpiwR5joCDzI5sXW+D0rcS
 vPtfM84Ccdeq/e6mvfIpZgR0/npQapKnrmUest0J7P2BFPHiFPji1KzZ7M+1aFOo
 9R6JdrAj0Sc+FBa+cGzH
 =v6Of
 -----END PGP SIGNATURE-----

Merge tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull misc DAX updates from Vishal Verma:
 "DAX error handling for 4.7

   - Until now, dax has been disabled if media errors were found on any
     device.  This enables the use of DAX in the presence of these
     errors by making all sector-aligned zeroing go through the driver.

   - The driver (already) has the ability to clear errors on writes that
     are sent through the block layer using 'DSMs' defined in ACPI 6.1.

  Other misc changes:

   - When mounting DAX filesystems, check to make sure the partition is
     page aligned.  This is a requirement for DAX, and previously, we
     allowed such unaligned mounts to succeed, but subsequent
     reads/writes would fail.

   - Misc/cleanup fixes from Jan that remove unused code from DAX
     related to zeroing, writeback, and some size checks"

* tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: fix a comment in dax_zero_page_range and dax_truncate_page
  dax: for truncate/hole-punch, do zeroing through the driver if possible
  dax: export a low-level __dax_zero_page_range helper
  dax: use sb_issue_zerout instead of calling dax_clear_sectors
  dax: enable dax in the presence of known media errors (badblocks)
  dax: fallback from pmd to pte on error
  block: Update blkdev_dax_capable() for consistency
  xfs: Add alignment check for DAX mount
  ext2: Add alignment check for DAX mount
  ext4: Add alignment check for DAX mount
  block: Add bdev_dax_supported() for dax mount checks
  block: Add vfs_msg() interface
  dax: Remove redundant inode size checks
  dax: Remove pointless writeback from dax_do_io()
  dax: Remove zeroing from dax_io()
  dax: Remove dead zeroing code from fault handlers
  ext2: Avoid DAX zeroing to corrupt data
  ext2: Fix block zeroing in ext2_get_blocks() for DAX
  dax: Remove complete_unwritten argument
  DAX: move RADIX_DAX_ definitions to dax.c
2016-05-26 19:34:26 -07:00
Linus Torvalds bdc6b758e4 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Mostly tooling and PMU driver fixes, but also a number of late updates
  such as the reworking of the call-chain size limiting logic to make
  call-graph recording more robust, plus tooling side changes for the
  new 'backwards ring-buffer' extension to the perf ring-buffer"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  perf record: Read from backward ring buffer
  perf record: Rename variable to make code clear
  perf record: Prevent reading invalid data in record__mmap_read
  perf evlist: Add API to pause/resume
  perf trace: Use the ptr->name beautifier as default for "filename" args
  perf trace: Use the fd->name beautifier as default for "fd" args
  perf report: Add srcline_from/to branch sort keys
  perf evsel: Record fd into perf_mmap
  perf evsel: Add overwrite attribute and check write_backward
  perf tools: Set buildid dir under symfs when --symfs is provided
  perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced
  perf annotate: Sort list of recognised instructions
  perf annotate: Fix identification of ARM blt and bls instructions
  perf tools: Fix usage of max_stack sysctl
  perf callchain: Stop validating callchains by the max_stack sysctl
  perf trace: Fix exit_group() formatting
  perf top: Use machine->kptr_restrict_warned
  perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1
  perf machine: Do not bail out if not managing to read ref reloc symbol
  perf/x86/intel/p4: Trival indentation fix, remove space
  ...
2016-05-25 17:05:40 -07:00
Linus Torvalds 84787c572d Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:

 - Oleg's "wait/ptrace: assume __WALL if the child is traced".  It's a
   kernel-based workaround for existing userspace issues.

 - A few hotfixes

 - befs cleanups

 - nilfs2 updates

 - sys_wait() changes

 - kexec updates

 - kdump

 - scripts/gdb updates

 - the last of the MM queue

 - a few other misc things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (84 commits)
  kgdb: depends on VT
  drm/amdgpu: make amdgpu_mn_get wait for mmap_sem killable
  drm/radeon: make radeon_mn_get wait for mmap_sem killable
  drm/i915: make i915_gem_mmap_ioctl wait for mmap_sem killable
  uprobes: wait for mmap_sem for write killable
  prctl: make PR_SET_THP_DISABLE wait for mmap_sem killable
  exec: make exec path waiting for mmap_sem killable
  aio: make aio_setup_ring killable
  coredump: make coredump_wait wait for mmap_sem for write killable
  vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
  ipc, shm: make shmem attach/detach wait for mmap_sem killable
  mm, fork: make dup_mmap wait for mmap_sem for write killable
  mm, proc: make clear_refs killable
  mm: make vm_brk killable
  mm, elf: handle vm_brk error
  mm, aout: handle vm_brk failures
  mm: make vm_munmap killable
  mm: make vm_mmap killable
  mm: make mmap_sem for write waits killable for mm syscalls
  MAINTAINERS: add co-maintainer for scripts/gdb
  ...
2016-05-23 19:42:28 -07:00
Linus Torvalds 3ec438afed Merge branch 'for-4.7-dw' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata sata_dwc_460ex updates from Tejun Heo:
 "Patches to bring sata_dwc_460ex up to snuff.

  It was a separate pull request because it depends on dmaengine dw
  platform changes which are now in mainline"

* 'for-4.7-dw' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (24 commits)
  ata: dwc: add DMADEVICES dependency
  powerpc/4xx: Device tree update for the 460ex DWC SATA
  ata: sata_dwc_460ex: make debug messages neat
  ata: sata_dwc_460ex: supply physical address of FIFO to DMA
  ata: sata_dwc_460ex: use devm_ioremap
  ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()
  ata: sata_dwc_460ex: use readl/writel_relaxed()
  ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API
  ata: sata_dwc_460ex: add __iomem to register base pointer
  ata: sata_dwc_460ex: get rid of incorrect cast
  ata: sata_dwc_460ex: get rid of some pointless casts
  ata: sata_dwc_460ex: remove empty libata callback
  ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
  ata: sata_dwc_460ex: get rid of global data
  ata: sata_dwc_460ex: add phy support
  ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
  ata: sata_dwc_460ex: skip dma setup for non-dma commands
  ata: sata_dwc_460ex: select only core part of DMA driver
  ata: sata_dwc_460ex: DMA is always a flow controller
  ...
2016-05-23 18:19:21 -07:00
Michal Hocko 6904817607 vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
most architectures are relying on mmap_sem for write in their
arch_setup_additional_pages.  If the waiting task gets killed by the oom
killer it would block oom_reaper from asynchronous address space reclaim
and reduce the chances of timely OOM resolving.  Wait for the lock in
the killable mode and return with EINTR if the task got killed while
waiting.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>	[x86 vdso]
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Petr Mladek 42a0bb3f71 printk/nmi: generic solution for safe printk in NMI
printk() takes some locks and could not be used a safe way in NMI
context.

The chance of a deadlock is real especially when printing stacks from
all CPUs.  This particular problem has been addressed on x86 by the
commit a9edc88093 ("x86/nmi: Perform a safe NMI stack trace on all
CPUs").

The patchset brings two big advantages.  First, it makes the NMI
backtraces safe on all architectures for free.  Second, it makes all NMI
messages almost safe on all architectures (the temporary buffer is
limited.  We still should keep the number of messages in NMI context at
minimum).

Note that there already are several messages printed in NMI context:
WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE
handlers.  These are not easy to avoid.

This patch reuses most of the code and makes it generic.  It is useful
for all messages and architectures that support NMI.

The alternative printk_func is set when entering and is reseted when
leaving NMI context.  It queues IRQ work to copy the messages into the
main ring buffer in a safe context.

__printk_nmi_flush() copies all available messages and reset the buffer.
Then we could use a simple cmpxchg operations to get synchronized with
writers.  There is also used a spinlock to get synchronized with other
flushers.

We do not longer use seq_buf because it depends on external lock.  It
would be hard to make all supported operations safe for a lockless use.
It would be confusing and error prone to make only some operations safe.

The code is put into separate printk/nmi.c as suggested by Steven
Rostedt.  It needs a per-CPU buffer and is compiled only on
architectures that call nmi_enter().  This is achieved by the new
HAVE_NMI Kconfig flag.

The are MN10300 and Xtensa architectures.  We need to clean up NMI
handling there first.  Let's do it separately.

The patch is heavily based on the draft from Peter Zijlstra, see

  https://lkml.org/lkml/2015/6/10/327

[arnd@arndb.de: printk-nmi: use %zu format string for size_t]
[akpm@linux-foundation.org: min_t->min - all types are size_t here]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>	[arm part]
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Kosina <jkosina@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Jiri Slaby 5f56a5dfdb exit_thread: remove empty bodies
Define HAVE_EXIT_THREAD for archs which want to do something in
exit_thread. For others, let's define exit_thread as an empty inline.

This is a cleanup before we change the prototype of exit_thread to
accept a task parameter.

[akpm@linux-foundation.org: fix mips]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Linus Torvalds c04a588029 powerpc updates for 4.7
Highlights:
  - Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V
  - Live patching support for ppc64le (also merged via livepatching.git)
 
 Various cleanups & minor fixes from:
  - Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
    Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie, Lennart
    Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael
    Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras, Rashmica Gupta,
    Russell Currey, Suraj Jitindar Singh, Thiago Jung Bauermann, Valentin
    Rothberg, Vipin K Parashar.
 
 General:
  - Update LMB associativity index during DLPAR add/remove from Nathan Fontenot
  - Fix branching to OOL handlers in relocatable kernel from Hari Bathini
  - Add support for userspace Power9 copy/paste from Chris Smart
  - Always use STRICT_MM_TYPECHECKS from Michael Ellerman
  - Add mask of possible MMU features from Michael Ellerman
 
 PCI:
  - Enable pass through of NVLink to guests from Alexey Kardashevskiy
  - Cleanups in preparation for powernv PCI hotplug from Gavin Shan
  - Don't report error in eeh_pe_reset_and_recover() from Gavin Shan
  - Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan
  - Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" from Guilherme G. Piccoli
  - Remove the dependency on EEH struct in DDW mechanism from Guilherme G. Piccoli
 
 selftests:
  - Test cp_abort during context switch from Chris Smart
  - Add several tests for transactional memory support from Rashmica Gupta
 
 perf:
  - Add support for sampling interrupt register state from Anju T
  - Add support for unwinding perf-stackdump from Chandan Kumar
 
 cxl:
  - Configure the PSL for two CAPI ports on POWER8NVL from Philippe Bergheaud
  - Allow initialization on timebase sync failures from Frederic Barrat
  - Increase timeout for detection of AFU mmio hang from Frederic Barrat
  - Handle num_of_processes larger than can fit in the SPA from Ian Munsie
  - Ensure PSL interrupt is configured for contexts with no AFU IRQs from Ian Munsie
  - Add kernel API to allow a context to operate with relocate disabled from Ian Munsie
  - Check periodically the coherent platform function's state from Christophe Lombard
 
 Freescale:
  - Updates from Scott: "Contains 86xx fixes, minor device tree fixes, an erratum
    workaround, and a kconfig dependency fix."
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPsGzAAoJEFHr6jzI4aWAVoAP/iKdrDe0eYHlVAE9SqnbsiZs
 lgDxdsC8P3fsmP1G9o/HkKhC82zHl/La8Ztz8dtqa+LkSzbfliWP1ztJsI7GsBFo
 tyCKzWnX9Rwvd3meHu/o/SQ29TNLm/PbPyyRqpj5QPbJ8XCXkAXR7ZZZqjvcMsJW
 /AgIr7Cgf53tl9oZzzl/c7CnNHhMq+NBdA71vhWtUx+T97wfJEGyKW6HhZyHDbEU
 iAki7fu77ZpEqC/Fh9swf0dCGBJ+a132NoMVo0AdV7EQLznUYlQpQEqa+1PyHZOP
 /ArOzf2mDg6m3PfCo1eiB07v8PnVZ3llEUbVAJNg3GUxbE4SHrqq/kwm0iElm3p/
 DvFxerCwdX9vmskJX4wDs+pSZRabXYj9XVMptsgFzA4joWrqqb7mBHqaort88YcY
 YSljEt1bHyXmiJ+dBya40qARsWUkCVN7ZgEzdxckq0KI3w7g2tqpqIbO2lClWT6t
 B3GpqQ4jp34+d1M14FB91fIGK7tMvOhSInE0Mv9+tPvRsepXqiiU/SwdAtRlr3m2
 zs/K+4FYcVjJ3Rmpgc+tI38PbZxHe212I35YN6L1LP+4ZfAtzz0NyKdooTIBtkbO
 19pX4WbBjKq8zK+YutrySncBIrbnI6VjW51vtRhgVKZliPFO/6zKagyU6FbxM+E5
 udQES+t3F/9gvtxgxtDe
 =YvyQ
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V
   - Live patching support for ppc64le (also merged via livepatching.git)

  Various cleanups & minor fixes from:
   - Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
     Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie,
     Lennart Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring,
     Michael Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras,
     Rashmica Gupta, Russell Currey, Suraj Jitindar Singh, Thiago Jung
     Bauermann, Valentin Rothberg, Vipin K Parashar.

  General:
   - Update LMB associativity index during DLPAR add/remove from Nathan
     Fontenot
   - Fix branching to OOL handlers in relocatable kernel from Hari Bathini
   - Add support for userspace Power9 copy/paste from Chris Smart
   - Always use STRICT_MM_TYPECHECKS from Michael Ellerman
   - Add mask of possible MMU features from Michael Ellerman

  PCI:
   - Enable pass through of NVLink to guests from Alexey Kardashevskiy
   - Cleanups in preparation for powernv PCI hotplug from Gavin Shan
   - Don't report error in eeh_pe_reset_and_recover() from Gavin Shan
   - Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan
   - Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
     from Guilherme G Piccoli
   - Remove the dependency on EEH struct in DDW mechanism from Guilherme
     G Piccoli

  selftests:
   - Test cp_abort during context switch from Chris Smart
   - Add several tests for transactional memory support from Rashmica
     Gupta

  perf:
   - Add support for sampling interrupt register state from Anju T
   - Add support for unwinding perf-stackdump from Chandan Kumar

  cxl:
   - Configure the PSL for two CAPI ports on POWER8NVL from Philippe
     Bergheaud
   - Allow initialization on timebase sync failures from Frederic Barrat
   - Increase timeout for detection of AFU mmio hang from Frederic
     Barrat
   - Handle num_of_processes larger than can fit in the SPA from Ian
     Munsie
   - Ensure PSL interrupt is configured for contexts with no AFU IRQs
     from Ian Munsie
   - Add kernel API to allow a context to operate with relocate disabled
     from Ian Munsie
   - Check periodically the coherent platform function's state from
     Christophe Lombard

  Freescale:
   - Updates from Scott: "Contains 86xx fixes, minor device tree fixes,
     an erratum workaround, and a kconfig dependency fix."

* tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (192 commits)
  powerpc/86xx: Fix PCI interrupt map definition
  powerpc/86xx: Move pci1 definition to the include file
  powerpc/fsl: Fix build of the dtb embedded kernel images
  powerpc/fsl: Fix rcpm compatible string
  powerpc/fsl: Remove FSL_SOC dependency from FSL_LBC
  powerpc/fsl-pci: Add a workaround for PCI 5 errata
  powerpc/fsl: Fix SPI compatible on t208xrdb and t1040rdb
  powerpc/powernv/npu: Add PE to PHB's list
  powerpc/powernv: Fix insufficient memory allocation
  powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism
  Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
  powerpc/eeh: Drop unnecessary label in eeh_pe_change_owner()
  powerpc/eeh: Ignore handlers in eeh_pe_reset_and_recover()
  powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover()
  powerpc/eeh: Don't report error in eeh_pe_reset_and_recover()
  Revert "powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()"
  powerpc/powernv/npu: Enable NVLink pass through
  powerpc/powernv/npu: Rework TCE Kill handling
  powerpc/powernv/npu: Add set/unset window helpers
  powerpc/powernv/ioda2: Export debug helper pe_level_printk()
  ...
2016-05-20 10:12:41 -07:00
Ingo Molnar 21f77d231f perf/core improvements and fixes:
User visible:
 
 - Honour the kernel.perf_event_max_stack knob more precisely by not counting
   PERF_CONTEXT_{KERNEL,USER} when deciding when to stop adding entries to
   the perf_sample->ip_callchain[] array (Arnaldo Carvalho de Melo)
 
 - Fix identation of 'stalled-backend-cycles' in 'perf stat' (Namhyung Kim)
 
 - Update runtime using 'cpu-clock' event in 'perf stat' (Namhyung Kim)
 
 - Use 'cpu-clock' for cpu targets in 'perf stat' (Namhyung Kim)
 
 - Avoid fractional digits for integer scales in 'perf stat' (Andi Kleen)
 
 - Store vdso buildid unconditionally, as it appears in callchains and
   we're not checking those when creating the build-id table, so we
   end up not being able to resolve VDSO symbols when doing analysis
   on a different machine than the one where recording was done, possibly
   of a different arch even (arm -> x86_64) (He Kuang)
 
 Infrastructure:
 
 - Generalize max_stack sysctl handler, will be used for configuring
   multiple kernel knobs related to callchains (Arnaldo Carvalho de Melo)
 
 Cleanups:
 
 - Introduce DSO__NAME_KALLSYMS and DSO__NAME_KCORE, to stop using
   open coded strings (Masami Hiramatsu)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXOn7eAAoJENZQFvNTUqpAsOAP/3f/XJekPQAnMcKRBp2noCuj
 nRu1kBltVJyP8iOU5PKSJwel4F9ykNNMl+/rzzxHDo13IM8uc+HnZOJZ6e9mJIJ1
 xqjdqM4EDlYYoFApJzCjTK6CMlevCazosdQT1bbmMDYVPc2uQR/GnutFrzqf/Plg
 hEougIGtfrdy85g95CRdxpy2yMwDK4EwsiDRm9ib1hnuamQZl97buWemBVqSJmLY
 p82E2aMU5Fv5+B8AO4I7V88ZmgpmryjxpM+LjffgNUDSKsSHrlG4NiQ3znV1bgst
 Rc++w78+qxoIozOu6/IX8eSI2L/1eyM/yQ6Qre0KuvYXCl+NopTAYSSJlaA4tyHF
 c55z7HucuyATN3PrFRHlbWUT/RMIVC0j0lnZOc7SJLl90hJQ+nv0iZcbYwMbeHu1
 3LGlcd9jDwQYiClbaT9ATxZJ8B9An0/k/HJdatbAHN0wRomP2Ozz/qD2nmEbUwpV
 sCyLOo/LJkvVkuUjSg6ZiOArNIk4iTSPSAUV+SAL6YOEOZMAX5ISUJQ174+zFC9a
 gqtVsCXvwLIsndXb8ys1r9/fit/MUci0OzKX3SG1K765+E4Bk23KcAgMNbM/a7lp
 ZmHDXMC+yBYcnYNnaxkp7c55CWUlKGOeR4e+KmB99KoeIleYgPhD2UM5beo61TmN
 yUEPtiiFiZmTRkiAu83R
 =7OdF
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-20160516' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Honour the kernel.perf_event_max_stack knob more precisely by not counting
  PERF_CONTEXT_{KERNEL,USER} when deciding when to stop adding entries to
  the perf_sample->ip_callchain[] array (Arnaldo Carvalho de Melo)

- Fix identation of 'stalled-backend-cycles' in 'perf stat' (Namhyung Kim)

- Update runtime using 'cpu-clock' event in 'perf stat' (Namhyung Kim)

- Use 'cpu-clock' for cpu targets in 'perf stat' (Namhyung Kim)

- Avoid fractional digits for integer scales in 'perf stat' (Andi Kleen)

- Store vdso buildid unconditionally, as it appears in callchains and
  we're not checking those when creating the build-id table, so we
  end up not being able to resolve VDSO symbols when doing analysis
  on a different machine than the one where recording was done, possibly
  of a different arch even (arm -> x86_64) (He Kuang)

Infrastructure changes:

- Generalize max_stack sysctl handler, will be used for configuring
  multiple kernel knobs related to callchains (Arnaldo Carvalho de Melo)

Cleanups:

- Introduce DSO__NAME_KALLSYMS and DSO__NAME_KCORE, to stop using
  open coded strings (Masami Hiramatsu)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-05-20 08:20:14 +02:00
Linus Torvalds a05a70db34 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - fsnotify fix

 - poll() timeout fix

 - a few scripts/ tweaks

 - debugobjects updates

 - the (small) ocfs2 queue

 - Minor fixes to kernel/padata.c

 - Maybe half of the MM queue

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
  mm, page_alloc: restore the original nodemask if the fast path allocation failed
  mm, page_alloc: uninline the bad page part of check_new_page()
  mm, page_alloc: don't duplicate code in free_pcp_prepare
  mm, page_alloc: defer debugging checks of pages allocated from the PCP
  mm, page_alloc: defer debugging checks of freed pages until a PCP drain
  cpuset: use static key better and convert to new API
  mm, page_alloc: inline pageblock lookup in page free fast paths
  mm, page_alloc: remove unnecessary variable from free_pcppages_bulk
  mm, page_alloc: pull out side effects from free_pages_check
  mm, page_alloc: un-inline the bad part of free_pages_check
  mm, page_alloc: check multiple page fields with a single branch
  mm, page_alloc: remove field from alloc_context
  mm, page_alloc: avoid looking up the first zone in a zonelist twice
  mm, page_alloc: shortcut watermark checks for order-0 pages
  mm, page_alloc: reduce cost of fair zone allocation policy retry
  mm, page_alloc: shorten the page allocator fast path
  mm, page_alloc: check once if a zone has isolated pageblocks
  mm, page_alloc: move __GFP_HARDWALL modifications out of the fastpath
  mm, page_alloc: simplify last cpupid reset
  mm, page_alloc: remove unnecessary initialisation from __alloc_pages_nodemask()
  ...
2016-05-19 20:00:06 -07:00
Hugh Dickins fd8cfd3000 arch: fix has_transparent_hugepage()
I've just discovered that the useful-sounding has_transparent_hugepage()
is actually an architecture-dependent minefield: on some arches it only
builds if CONFIG_TRANSPARENT_HUGEPAGE=y, on others it's also there when
not, but on some of those (arm and arm64) it then gives the wrong
answer; and on mips alone it's marked __init, which would crash if
called later (but so far it has not been called later).

Straighten this out: make it available to all configs, with a sensible
default in asm-generic/pgtable.h, removing its definitions from those
arches (arc, arm, arm64, sparc, tile) which are served by the default,
adding #define has_transparent_hugepage has_transparent_hugepage to
those (mips, powerpc, s390, x86) which need to override the default at
runtime, and removing the __init from mips (but maybe that kind of code
should be avoided after init: set a static variable the first time it's
called).

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Vineet Gupta <vgupta@synopsys.com>		[arch/arc]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>	[arch/s390]
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19 19:12:14 -07:00
Vaishali Thakkar 71bf79cc3f powerpc: mm: use hugetlb_bad_size()
Update setup_hugepagesz() to call hugetlb_bad_size() when unsupported
hugepage size is found.

Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19 19:12:14 -07:00
Linus Torvalds 7beaa24ba4 Small release overall.
- x86: miscellaneous fixes, AVIC support (local APIC virtualization,
 AMD version)
 
 - s390: polling for interrupts after a VCPU goes to halted state is
 now enabled for s390; use hardware provided information about facility
 bits that do not need any hypervisor activity, and other fixes for
 cpu models and facilities; improve perf output; floating interrupt
 controller improvements.
 
 - MIPS: miscellaneous fixes
 
 - PPC: bugfixes only
 
 - ARM: 16K page size support, generic firmware probing layer for
 timer and GIC
 
 Christoffer Dall (KVM-ARM maintainer) says:
 "There are a few changes in this pull request touching things outside
  KVM, but they should all carry the necessary acks and it made the
  merge process much easier to do it this way."
 
 though actually the irqchip maintainers' acks didn't make it into the
 patches.  Marc Zyngier, who is both irqchip and KVM-ARM maintainer,
 later acked at http://mid.gmane.org/573351D1.4060303@arm.com
 "more formally and for documentation purposes".
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXPJjyAAoJEL/70l94x66DhioH/j4fwQ0FmfPSM9PArzaFHQdx
 LNE3tU4+bobbsy1BJr4DiAaOUQn3DAgwUvGLWXdeLiOXtoWXBiFHKaxlqEsCA6iQ
 xcTH1TgfxsVoqGQ6bT9X/2GCx70heYpcWG3f+zqBy7ZfFmQykLAC/HwOr52VQL8f
 hUFi3YmTHcnorp0n5Xg+9r3+RBS4D/kTbtdn6+KCLnPJ0RcgNkI3/NcafTemoofw
 Tkv8+YYFNvKV13qlIfVqxMa0GwWI3pP6YaNKhaS5XO8Pu16HuuF1JthJsUBDzwBa
 RInp8R9MoXgsBYhLpz3jc9vWG7G9yDl5LehsD9KOUGOaFYJ7sQN+QZOusa6jFgA=
 =llO5
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Small release overall.

  x86:
   - miscellaneous fixes
   - AVIC support (local APIC virtualization, AMD version)

  s390:
   - polling for interrupts after a VCPU goes to halted state is now
     enabled for s390
   - use hardware provided information about facility bits that do not
     need any hypervisor activity, and other fixes for cpu models and
     facilities
   - improve perf output
   - floating interrupt controller improvements.

  MIPS:
   - miscellaneous fixes

  PPC:
   - bugfixes only

  ARM:
   - 16K page size support
   - generic firmware probing layer for timer and GIC

  Christoffer Dall (KVM-ARM maintainer) says:
    "There are a few changes in this pull request touching things
     outside KVM, but they should all carry the necessary acks and it
     made the merge process much easier to do it this way."

  though actually the irqchip maintainers' acks didn't make it into the
  patches.  Marc Zyngier, who is both irqchip and KVM-ARM maintainer,
  later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more
  formally and for documentation purposes')"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits)
  KVM: MTRR: remove MSR 0x2f8
  KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same
  svm: Manage vcpu load/unload when enable AVIC
  svm: Do not intercept CR8 when enable AVIC
  svm: Do not expose x2APIC when enable AVIC
  KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore
  svm: Add VMEXIT handlers for AVIC
  svm: Add interrupt injection via AVIC
  KVM: x86: Detect and Initialize AVIC support
  svm: Introduce new AVIC VMCB registers
  KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick
  KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks
  KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks
  KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg
  KVM: x86: Misc LAPIC changes to expose helper functions
  KVM: shrink halt polling even more for invalid wakeups
  KVM: s390: set halt polling to 80 microseconds
  KVM: halt_polling: provide a way to qualify wakeups during poll
  KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts
  kvm: Conditionally register IRQ bypass consumer
  ...
2016-05-19 11:27:09 -07:00
Linus Torvalds 9e17632c0a Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
 "Assorted cleanups and fixes all over the place"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  coredump: only charge written data against RLIMIT_CORE
  coredump: get rid of coredump_params->written
  ecryptfs_lookup(): try either only encrypted or plaintext name
  ecryptfs: avoid multiple aliases for directories
  bpf: reject invalid names right in ->lookup()
  __d_alloc(): treat NULL name as QSTR("/", 1)
  mtd: switch ubi_open_volume_path() to vfs_stat()
  mtd: switch open_mtd_by_chdev() to use of vfs_stat()
2016-05-18 11:51:59 -07:00
Dan Williams 0a70bd4305 dax: enable dax in the presence of known media errors (badblocks)
1/ If a mapping overlaps a bad sector fail the request.

2/ Do not opportunistically report more dax-capable capacity than is
   requested when errors present.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[vishal: fix a conflict with system RAM collision patches]
[vishal: add a 'size' parameter to ->direct_access]
[vishal: fix a conflict with DAX alignment check patches]
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2016-05-18 12:16:56 -06:00
Linus Torvalds 1eccc6e152 This is the bulk of GPIO changes for kernel cycle v4.7:
Core infrastructural changes:
 
 - Support for natively single-ended GPIO driver stages. This
   means that if the hardware has registers to configure open
   drain or open source configuration, we use that rather than
   (as we did before) try to emulate it by switching the line
   to an input to get high impedance. This is also documented
   throughly in Documentation/gpio/driver.txt for those of you
   who did not understand one word of what I just wrote.
 
 - Start to do away with the unnecessarily complex and
   unitelligible ARCH_REQUIRE_GPIOLIB and
   ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from
   the time when the GPIO subsystem was unmaintained. Archs can
   now just select GPIOLIB and be done with it, cleanups to
   arches will trickle in for the next kernel. Some minor archs
   ACKed the changes immediately so these are included in this
   pull request.
 
 - Advancing the use of the data pointer inside the GPIO device
   for storing driver data by switching the PowerPC, Super-H
   Unicore and a few other subarches or subsystem drivers in
   ALSA SoC, Input, serial, SSB, staging etc to use it.
 
 - The initialization now reads the input/output state of the
   GPIO lines, so that each GPIO descriptor knows - if this
   callback is implemented - whether the line is input or
   output. This also reflects nicely in userspace "lsgpio".
 
 - It is now possible to name GPIO producer names, line names,
   from the device tree. (Platform data has been supported for
   a while.) I bet we will get a similar mechanism for ACPI
   one of those days. This makes is possible to get sensible
   producer names for e.g. GPIO rails in "lsgpio" in userspace.
 
 New drivers:
 
 - New driver for the Loongson1.
 
 - The XLP driver now supports Broadcom Vulcan ARM64.
 
 - The IT87 driver now supports IT8620 and IT8628.
 
 - The PCA953X driver now supports Galileo Gen2.
 
 Driver improvements:
 
 - MCP23S08 was switched to use the gpiolib irqchip helpers and
   now also suppors level-triggered interrupts.
 
 - 74x164 and RCAR now supports the .set_multiple() callback
 
 - AMDPT was converted to use generic GPIO.
 
 - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
   support the new single ended callback for open drain
   and in some cases open source.
 
 - Implement the .get_direction() callback for a few more drivers
   like PL061, Xgene.
 
 Cleanups:
 
 - Paul Gortmaker combed through the drivers and de-modularized
   those who are not really modules.
 
 - Move the GPIO poweroff DT bindings to the power subdir where
   they belong.
 
 - Rename gpio-generic.c to gpio-mmio.c, which is much more to the
   point. That's what it is handling, nothing more, nothing less.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXOuJ5AAoJEEEQszewGV1zNXsQAII5wtkP69WRJ3goYBKg1dZN
 DkuLqZyVI4hCgRhptzUW10gDLHKKOCVubfetTJHSpyG/dWDJXPCyH6FHF+pW6lMX
 y+em8kAvWctKpaosy4EM7O55/IohW0/fNCTOfzfrUNivjydFuA2XwPUiPqC7111O
 DeKlC/t+W1JEvZTiKMi83pKq+9wqhiHmD0qxRHhV57S+MT8e7mdlSKOp7uUkKPkg
 LPlerXosnmeFjL2emuSnKl/tq8pOyruU6uaIGG/uwpbo2W86Dok9GY2GWkQ4pANT
 pDtprc4aJ/Clf6Q0CoKwQbmAozqTDeJo+Und9tRs2KuZRly2bWOcyVE0lyK+Y4s0
 544LcKw2q6cB9ARZ6JExEVRJejPISGKMqo9TaHkyNSIJoiiatKYvNS4WVeFtTgbI
 W+1WfM1svPymNRqVPO1PMLV+3m9dalDH2WjtaFF21uCAQ/G0AuPEHjEDbbx0HIpb
 qrvWmYzZ97Rm/LdYROFRO53nEdCp2jh6c3n4/2kGYM8H0suvGxXZsB1g4i+Dm+B+
 qKVTS282azlDuH9ohXeXizeb6atK6s8TC3Rmew97SmXDO00cUQzEQO/ZquRLHY9r
 n83afQ4OL2Z9yruAxAk7pCshVSyheOsHuFPuZ7bwPW31VMdoWNRkhnaTUXMjGfYg
 3y39IHrCKWNMCCVM1iNl
 =z4d6
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for kernel cycle v4.7:

  Core infrastructural changes:

   - Support for natively single-ended GPIO driver stages.

     This means that if the hardware has registers to configure open
     drain or open source configuration, we use that rather than (as we
     did before) try to emulate it by switching the line to an input to
     get high impedance.

     This is also documented throughly in Documentation/gpio/driver.txt
     for those of you who did not understand one word of what I just
     wrote.

   - Start to do away with the unnecessarily complex and unitelligible
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another
     evolutional artifact from the time when the GPIO subsystem was
     unmaintained.

     Archs can now just select GPIOLIB and be done with it, cleanups to
     arches will trickle in for the next kernel.  Some minor archs ACKed
     the changes immediately so these are included in this pull request.

   - Advancing the use of the data pointer inside the GPIO device for
     storing driver data by switching the PowerPC, Super-H Unicore and
     a few other subarches or subsystem drivers in ALSA SoC, Input,
     serial, SSB, staging etc to use it.

   - The initialization now reads the input/output state of the GPIO
     lines, so that each GPIO descriptor knows - if this callback is
     implemented - whether the line is input or output.  This also
     reflects nicely in userspace "lsgpio".

   - It is now possible to name GPIO producer names, line names, from
     the device tree.  (Platform data has been supported for a while).
     I bet we will get a similar mechanism for ACPI one of those days.
     This makes is possible to get sensible producer names for e.g.
     GPIO rails in "lsgpio" in userspace.

  New drivers:

   - New driver for the Loongson1.

   - The XLP driver now supports Broadcom Vulcan ARM64.

   - The IT87 driver now supports IT8620 and IT8628.

   - The PCA953X driver now supports Galileo Gen2.

  Driver improvements:

   - MCP23S08 was switched to use the gpiolib irqchip helpers and now
     also suppors level-triggered interrupts.

   - 74x164 and RCAR now supports the .set_multiple() callback

   - AMDPT was converted to use generic GPIO.

   - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
     support the new single ended callback for open drain and in some
     cases open source.

   - Implement the .get_direction() callback for a few more drivers like
     PL061, Xgene.

  Cleanups:

   - Paul Gortmaker combed through the drivers and de-modularized those
     who are not really modules.

   - Move the GPIO poweroff DT bindings to the power subdir where they
     belong.

   - Rename gpio-generic.c to gpio-mmio.c, which is much more to the
     point.  That's what it is handling, nothing more, nothing less"

* tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits)
  MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
  gpio: zevio: make it explicitly non-modular
  gpio: timberdale: make it explicitly non-modular
  gpio: stmpe: make it explicitly non-modular
  gpio: sodaville: make it explicitly non-modular
  pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error
  gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms
  gpio: dt-bindings: add wd,mbl-gpio bindings
  gpio: of: make it possible to name GPIO lines
  gpio: make gpiod_to_irq() return negative for NO_IRQ
  gpio: xgene: implement .get_direction()
  gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver
  gpio: tegra: Implement gpio_get_direction callback
  gpio: set up initial state from .get_direction()
  gpio: rename gpio-generic.c into gpio-mmio.c
  gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case
  gpio: dwapb: add gpio-signaled acpi event support
  gpio: dwapb: convert device node to fwnode
  gpio: dwapb: remove name from dwapb_port_property
  gpio/qoriq: select IRQ_DOMAIN
  ...
2016-05-17 17:39:42 -07:00
Linus Torvalds 0b86c75db6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching updates from Jiri Kosina:

 - remove of our own implementation of architecture-specific relocation
   code and leveraging existing code in the module loader to perform
   arch-dependent work, from Jessica Yu.

   The relevant patches have been acked by Rusty (for module.c) and
   Heiko (for s390).

 - live patching support for ppc64le, which is a joint work of Michael
   Ellerman and Torsten Duwe.  This is coming from topic branch that is
   share between livepatching.git and ppc tree.

 - addition of livepatching documentation from Petr Mladek

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: make object/func-walking helpers more robust
  livepatch: Add some basic livepatch documentation
  powerpc/livepatch: Add live patching support on ppc64le
  powerpc/livepatch: Add livepatch stack to struct thread_info
  powerpc/livepatch: Add livepatch header
  livepatch: Allow architectures to specify an alternate ftrace location
  ftrace: Make ftrace_location_range() global
  livepatch: robustify klp_register_patch() API error checking
  Documentation: livepatch: outline Elf format and requirements for patch modules
  livepatch: reuse module loader code to write relocations
  module: s390: keep mod_arch_specific for livepatch modules
  module: preserve Elf information for livepatch modules
  Elf: add livepatch-specific Elf constants
2016-05-17 17:11:27 -07:00
Linus Torvalds 16bf834805 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits)
  gitignore: fix wording
  mfd: ab8500-debugfs: fix "between" in printk
  memstick: trivial fix of spelling mistake on management
  cpupowerutils: bench: fix "average"
  treewide: Fix typos in printk
  IB/mlx4: printk fix
  pinctrl: sirf/atlas7: fix printk spelling
  serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/
  w1: comment spelling s/minmum/minimum/
  Blackfin: comment spelling s/divsor/divisor/
  metag: Fix misspellings in comments.
  ia64: Fix misspellings in comments.
  hexagon: Fix misspellings in comments.
  tools/perf: Fix misspellings in comments.
  cris: Fix misspellings in comments.
  c6x: Fix misspellings in comments.
  blackfin: Fix misspelling of 'register' in comment.
  avr32: Fix misspelling of 'definitions' in comment.
  treewide: Fix typos in printk
  Doc: treewide : Fix typos in DocBook/filesystem.xml
  ...
2016-05-17 17:05:30 -07:00
Linus Torvalds a7fd20d1c4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...
2016-05-17 16:26:30 -07:00
Linus Torvalds 7f427d3a60 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull parallel filesystem directory handling update from Al Viro.

This is the main parallel directory work by Al that makes the vfs layer
able to do lookup and readdir in parallel within a single directory.
That's a big change, since this used to be all protected by the
directory inode mutex.

The inode mutex is replaced by an rwsem, and serialization of lookups of
a single name is done by a "in-progress" dentry marker.

The series begins with xattr cleanups, and then ends with switching
filesystems over to actually doing the readdir in parallel (switching to
the "iterate_shared()" that only takes the read lock).

A more detailed explanation of the process from Al Viro:
 "The xattr work starts with some acl fixes, then switches ->getxattr to
  passing inode and dentry separately.  This is the point where the
  things start to get tricky - that got merged into the very beginning
  of the -rc3-based #work.lookups, to allow untangling the
  security_d_instantiate() mess.  The xattr work itself proceeds to
  switch a lot of filesystems to generic_...xattr(); no complications
  there.

  After that initial xattr work, the series then does the following:

   - untangle security_d_instantiate()

   - convert a bunch of open-coded lookup_one_len_unlocked() to calls of
     that thing; one such place (in overlayfs) actually yields a trivial
     conflict with overlayfs fixes later in the cycle - overlayfs ended
     up switching to a variant of lookup_one_len_unlocked() sans the
     permission checks.  I would've dropped that commit (it gets
     overridden on merge from #ovl-fixes in #for-next; proper resolution
     is to use the variant in mainline fs/overlayfs/super.c), but I
     didn't want to rebase the damn thing - it was fairly late in the
     cycle...

   - some filesystems had managed to depend on lookup/lookup exclusion
     for *fs-internal* data structures in a way that would break if we
     relaxed the VFS exclusion.  Fixing hadn't been hard, fortunately.

   - core of that series - parallel lookup machinery, replacing
     ->i_mutex with rwsem, making lookup_slow() take it only shared.  At
     that point lookups happen in parallel; lookups on the same name
     wait for the in-progress one to be done with that dentry.

     Surprisingly little code, at that - almost all of it is in
     fs/dcache.c, with fs/namei.c changes limited to lookup_slow() -
     making it use the new primitive and actually switching to locking
     shared.

   - parallel readdir stuff - first of all, we provide the exclusion on
     per-struct file basis, same as we do for read() vs lseek() for
     regular files.  That takes care of most of the needed exclusion in
     readdir/readdir; however, these guys are trickier than lookups, so
     I went for switching them one-by-one.  To do that, a new method
     '->iterate_shared()' is added and filesystems are switched to it
     as they are either confirmed to be OK with shared lock on directory
     or fixed to be OK with that.  I hope to kill the original method
     come next cycle (almost all in-tree filesystems are switched
     already), but it's still not quite finished.

   - several filesystems get switched to parallel readdir.  The
     interesting part here is dealing with dcache preseeding by readdir;
     that needs minor adjustment to be safe with directory locked only
     shared.

     Most of the filesystems doing that got switched to in those
     commits.  Important exception: NFS.  Turns out that NFS folks, with
     their, er, insistence on VFS getting the fuck out of the way of the
     Smart Filesystem Code That Knows How And What To Lock(tm) have
     grown the locking of their own.  They had their own homegrown
     rwsem, with lookup/readdir/atomic_open being *writers* (sillyunlink
     is the reader there).  Of course, with VFS getting the fuck out of
     the way, as requested, the actual smarts of the smart filesystem
     code etc. had become exposed...

   - do_last/lookup_open/atomic_open cleanups.  As the result, open()
     without O_CREAT locks the directory only shared.  Including the
     ->atomic_open() case.  Backmerge from #for-linus in the middle of
     that - atomic_open() fix got brought in.

   - then comes NFS switch to saner (VFS-based ;-) locking, killing the
     homegrown "lookup and readdir are writers" kinda-sorta rwsem.  All
     exclusion for sillyunlink/lookup is done by the parallel lookups
     mechanism.  Exclusion between sillyunlink and rmdir is a real rwsem
     now - rmdir being the writer.

     Result: NFS lookups/readdirs/O_CREAT-less opens happen in parallel
     now.

   - the rest of the series consists of switching a lot of filesystems
     to parallel readdir; in a lot of cases ->llseek() gets simplified
     as well.  One backmerge in there (again, #for-linus - rockridge
     fix)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (74 commits)
  ext4: switch to ->iterate_shared()
  hfs: switch to ->iterate_shared()
  hfsplus: switch to ->iterate_shared()
  hostfs: switch to ->iterate_shared()
  hpfs: switch to ->iterate_shared()
  hpfs: handle allocation failures in hpfs_add_pos()
  gfs2: switch to ->iterate_shared()
  f2fs: switch to ->iterate_shared()
  afs: switch to ->iterate_shared()
  befs: switch to ->iterate_shared()
  befs: constify stuff a bit
  isofs: switch to ->iterate_shared()
  get_acorn_filename(): deobfuscate a bit
  btrfs: switch to ->iterate_shared()
  logfs: no need to lock directory in lseek
  switch ecryptfs to ->iterate_shared
  9p: switch to ->iterate_shared()
  fat: switch to ->iterate_shared()
  romfs, squashfs: switch to ->iterate_shared()
  more trivial ->iterate_shared conversions
  ...
2016-05-17 11:01:31 -07:00
Al Viro 0e0162bb8c Merge branch 'ovl-fixes' into for-linus
Backmerge to resolve a conflict in ovl_lookup_real();
"ovl_lookup_real(): use lookup_one_len_unlocked()" instead,
but it was too late in the cycle to rebase.
2016-05-17 02:17:59 -04:00
Arnaldo Carvalho de Melo 3e4de4ec4c perf core: Add perf_callchain_store_context() helper
We need have different helpers to account how many contexts we have in
the sample and for real addresses, so do it now as a prep patch, to
ease review.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-q964tnyuqrxw5gld18vizs3c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-16 23:11:52 -03:00
Arnaldo Carvalho de Melo 3b1fff0803 perf core: Add a 'nr' field to perf_event_callchain_context
We will use it to count how many addresses are in the entry->ip[] array,
excluding PERF_CONTEXT_{KERNEL,USER,etc} entries, so that we can really
return the number of entries specified by the user via the relevant
sysctl, kernel.perf_event_max_contexts, or via the per event
perf_event_attr.sample_max_stack knob.

This way we keep the perf_sample->ip_callchain->nr meaning, that is the
number of entries, be it real addresses or PERF_CONTEXT_ entries, while
honouring the max_stack knobs, i.e. the end result will be max_stack
entries if we have at least that many entries in a given stack trace.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-s8teto51tdqvlfhefndtat9r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-16 23:11:51 -03:00
Arnaldo Carvalho de Melo cfbcf46845 perf core: Pass max stack as a perf_callchain_entry context
This makes perf_callchain_{user,kernel}() receive the max stack
as context for the perf_callchain_entry, instead of accessing
the global sysctl_perf_event_max_stack.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-16 23:11:50 -03:00
Alessio Igor Bogani 1eef33bec1 powerpc/86xx: Fix PCI interrupt map definition
Fix PCI interrupt map definition from 2 to 4 cells. Move
interrupt-map and interrupt-map-mask and clone interrupts
into the pcie child nodes.

Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-05-16 18:45:39 -05:00
Alessio Igor Bogani a66639d4ee powerpc/86xx: Move pci1 definition to the include file
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-05-16 18:29:04 -05:00
Alessio Igor Bogani 4680c9d506 powerpc/fsl: Fix build of the dtb embedded kernel images
Commit dc37374b9c ("powerpc/fsl: Move Freescale device tree files
into fsl folder") moved a lot of device tree files into fsl directory,
fixing Makefile for cuImage target only.  Unfortunately there are other
targets which require embedding a device tree into the kernel image
(e.g. dtbImage.%).  So use a more generic approach.

Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
[scottwood: cleaned up commit message]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-05-16 18:26:12 -05:00
Chenhui Zhao d2d79dcc66 powerpc/fsl: Fix rcpm compatible string
For T1040, T1042, T1023, and T1024, they should use the compatible
string "fsl,qoriq-rcpm-2.1".

Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-05-16 18:23:59 -05:00
Scott Wood ed8fd100b4 powerpc/fsl: Remove FSL_SOC dependency from FSL_LBC
This dependency led to kconfig errors when MTD_NAND_FSL_ELBC was
enabled, which selects FSL_LBC, in the absence of FSL_SOC, as reported
in http://patchwork.ozlabs.org/patch/564405/

It was originally suggested to add an FSL_SOC dependency to
MTD_NAND_FSL_ELBC, but the FSL_SOC symbol has been a growing problem
due to hardware being shared between PPC and ARM SoCs.  Even though
eLBC isn't found on ARM SoCs (the newer IFC is used instead), I don't
want to expand the use of FSL_SOC for things other than functions
exported by fsl_soc.c.  In particular, it would be odd to add it to
MTD_NAND_FSL_ELBC and then remove it from MTD_NAND_FSL_IFC.

Removing artificial dependencies also helps get compile-test exposure
via randconfig, allyesconfig, etc.

Reported-by: Brian Norris <computersforpeace@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-05-16 17:39:00 -05:00
Linus Torvalds 825a3b2605 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:

 - massive CPU hotplug rework (Thomas Gleixner)

 - improve migration fairness (Peter Zijlstra)

 - CPU load calculation updates/cleanups (Yuyang Du)

 - cpufreq updates (Steve Muckle)

 - nohz optimizations (Frederic Weisbecker)

 - switch_mm() micro-optimization on x86 (Andy Lutomirski)

 - ... lots of other enhancements, fixes and cleanups.

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
  ARM: Hide finish_arch_post_lock_switch() from modules
  sched/core: Provide a tsk_nr_cpus_allowed() helper
  sched/core: Use tsk_cpus_allowed() instead of accessing ->cpus_allowed
  sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems
  sched/fair: Correct unit of load_above_capacity
  sched/fair: Clean up scale confusion
  sched/nohz: Fix affine unpinned timers mess
  sched/fair: Fix fairness issue on migration
  sched/core: Kill sched_class::task_waking to clean up the migration logic
  sched/fair: Prepare to fix fairness problems on migration
  sched/fair: Move record_wakee()
  sched/core: Fix comment typo in wake_q_add()
  sched/core: Remove unused variable
  sched: Make hrtick_notifier an explicit call
  sched/fair: Make ilb_notifier an explicit call
  sched/hotplug: Make activate() the last hotplug step
  sched/hotplug: Move migration CPU_DYING to sched_cpu_dying()
  sched/migration: Move CPU_ONLINE into scheduler state
  sched/migration: Move calc_load_migrate() into CPU_DYING
  sched/migration: Move prepare transition to SCHED_STARTING state
  ...
2016-05-16 14:47:16 -07:00
Daniel Borkmann 6077776b59 bpf: split HAVE_BPF_JIT into cBPF and eBPF variant
Split the HAVE_BPF_JIT into two for distinguishing cBPF and eBPF JITs.

Current cBPF ones:

  # git grep -n HAVE_CBPF_JIT arch/
  arch/arm/Kconfig:44:    select HAVE_CBPF_JIT
  arch/mips/Kconfig:18:   select HAVE_CBPF_JIT if !CPU_MICROMIPS
  arch/powerpc/Kconfig:129:       select HAVE_CBPF_JIT
  arch/sparc/Kconfig:35:  select HAVE_CBPF_JIT

Current eBPF ones:

  # git grep -n HAVE_EBPF_JIT arch/
  arch/arm64/Kconfig:61:  select HAVE_EBPF_JIT
  arch/s390/Kconfig:126:  select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
  arch/x86/Kconfig:94:    select HAVE_EBPF_JIT                    if X86_64

Later code also needs this facility to check for eBPF JITs.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-16 13:49:31 -04:00
chenhui zhao a8165d421d powerpc/fsl-pci: Add a workaround for PCI 5 errata
Issue:
As a master, the PCI IP block can combine a memory write to the last PCI
double word (4 bytes) of a cacheline with a 4 byte memory write to the
first PCI double word of the subsequent cacheline. This affects 32-bit
PCI target devices that blindly assert STOP on memory-write transactions,
without detecting that the data beat being transferred is the last data
beat of the transaction. It can cause a hang. PCI-X operation is not
affected by this erratum.

Workaround:
Setting the bit MDS in the PCI Bus Function Register will disable the
combining of crossing cacheline boundary requests into one burst
transaction. Therefore, it can prevent the errata scenario from
occurring.

This errata exists in MPC8543, MPC8543E, MPC8545, MPC8545E, MPC8547,
MPC8547E, MPC8548 and MPC8548E. Refer to PCI 5 in MPC8548 errata
document.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Zhiqiang Hou <Zhiqiang.Hou@freescale.com>
[scottwood: whitespace fix]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-05-15 19:18:48 -05:00
Hou Zhiqiang 6a369fa285 powerpc/fsl: Fix SPI compatible on t208xrdb and t1040rdb
On the t208xrdb and t1040rdb, the SPI device is n25q512ax3
instead of n25q512a.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@freescale.com>
Signed-off-by: Scott Wood <oss@buserror.net>
2016-05-15 19:15:44 -05:00
Christian Borntraeger 3491caf275 KVM: halt_polling: provide a way to qualify wakeups during poll
Some wakeups should not be considered a sucessful poll. For example on
s390 I/O interrupts are usually floating, which means that _ALL_ CPUs
would be considered runnable - letting all vCPUs poll all the time for
transactional like workload, even if one vCPU would be enough.
This can result in huge CPU usage for large guests.
This patch lets architectures provide a way to qualify wakeups if they
should be considered a good/bad wakeups in regard to polls.

For s390 the implementation will fence of halt polling for anything but
known good, single vCPU events. The s390 implementation for floating
interrupts does a wakeup for one vCPU, but the interrupt will be delivered
by whatever CPU checks first for a pending interrupt. We prefer the
woken up CPU by marking the poll of this CPU as "good" poll.
This code will also mark several other wakeup reasons like IPI or
expired timers as "good". This will of course also mark some events as
not sucessful. As  KVM on z runs always as a 2nd level hypervisor,
we prefer to not poll, unless we are really sure, though.

This patch successfully limits the CPU usage for cases like uperf 1byte
transactional ping pong workload or wakeup heavy workload like OLTP
while still providing a proper speedup.

This also introduced a new vcpu stat "halt_poll_no_tuning" that marks
wakeups that are considered not good for polling.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Radim Krčmář <rkrcmar@redhat.com> (for an earlier version)
Cc: David Matlack <dmatlack@google.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
[Rename config symbol. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-13 17:29:23 +02:00
Paolo Bonzini d7e1633abf Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD 2016-05-13 11:48:22 +02:00
Omar Sandoval a008393951 coredump: get rid of coredump_params->written
cprm->written is redundant with cprm->file->f_pos, so use that instead.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-12 16:55:50 -04:00
Andy Shevchenko 951b8e4e67 powerpc/4xx: Device tree update for the 460ex DWC SATA
Device tree update for the Applied micro processor 460ex on-chip SATA to use
"dmas" property.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-12 10:54:22 -04:00
Alexey Kardashevskiy 1d4e89cf0a powerpc/powernv/npu: Add PE to PHB's list
Before commit 3e68dc57 "powerpc/powernv: Remove DMA32 PE list", NPU PEs
were linked to the NPU PHB via phb->ioda.pe_dma_list; after that fix,
the phb->ioda.pe_list is used.

During the pe_dma_list removal, list_add_tail(&phb->ioda.pe_dma_list)
was removed, however no list_add() was added so does this patch.

Fixes: 3e68dc57219a ("powerpc/powernv: Remove DMA32 PE list")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-12 19:56:25 +10:00
Alexey Kardashevskiy 92a8675690 powerpc/powernv: Fix insufficient memory allocation
The pnv_pci_init_ioda_phb() helper allocates a blob to store auxilary
data such PE and M32/M64 segment allocation maps; this single blob has
few partitions, size of each is derived from the PE number -
phb->ioda.total_pe_num.

It was assumed that the minimum PE number is 8, however it is 4 for NPU
so the pe_alloc part was missing in the allocated blob. It was invisible
till recently as we were not tracking used M64 segments and NPUs do not
use M32 segments so the phb->ioda.m32_segmap (which was pointing to the
same address as phb->ioda.pe_alloc) has never been written to leaving
the pe_alloc memory intact.

After commit 401203ac2d "powerpc/powernv: Track M64 segment consumption"
the pe_alloc gets corrupted and PE allocation cannot work. This fixes
the issue by enforcing the minimum PE number to 8.

Fixes: 401203ac2d15 ("powerpc/powernv: Track M64 segment consumption")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-12 19:55:42 +10:00
Guilherme G. Piccoli 8445a87f70 powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism
Commit 39baadbf36 ("powerpc/eeh: Remove eeh information from pci_dn")
changed the pci_dn struct by removing its EEH-related members.
As part of this clean-up, DDW mechanism was modified to read the device
configuration address from eeh_dev struct.

As a consequence, now if we disable EEH mechanism on kernel command-line
for example, the DDW mechanism will fail, generating a kernel oops by
dereferencing a NULL pointer (which turns to be the eeh_dev pointer).

This patch just changes the configuration address calculation on DDW
functions to a manual calculation based on pci_dn members instead of
using eeh_dev-based address.

No functional changes were made. This was tested on pSeries, both
in PHyp and qemu guest.

Fixes: 39baadbf36 ("powerpc/eeh: Remove eeh information from pci_dn")
Cc: stable@vger.kernel.org # v3.4+
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-12 19:52:21 +10:00
Guilherme G. Piccoli c2078d9ef6 Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell"
This reverts commit 89a51df5ab.

The function eeh_add_device_early() is used to perform EEH
initialization in devices added later on the system, like in
hotplug/DLPAR scenarios. Since the commit 89a51df5ab ("powerpc/eeh:
Fix crash in eeh_add_device_early() on Cell") a new check was introduced
in this function - Cell has no EEH capabilities which led to kernel oops
if hotplug was performed, so checking for eeh_enabled() was introduced
to avoid the issue.

However, in architectures that EEH is present like pSeries or PowerNV,
we might reach a case in which no PCI devices are present on boot time
and so EEH is not initialized. Then, if a device is added via DLPAR for
example, eeh_add_device_early() fails because eeh_enabled() is false,
and EEH end up not being enabled at all.

This reverts the aforementioned patch since a new verification was
introduced by the commit d91dafc02f ("powerpc/eeh: Delay probing EEH
device during hotplug") and so the original Cell issue does not happen
anymore.

Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-12 19:52:21 +10:00
Gavin Shan d6d63d720d powerpc/eeh: Drop unnecessary label in eeh_pe_change_owner()
The label "reset" in eeh_pe_change_owner() is used only for once.
No need to keep it and just drop it. No logical changes introduced.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-12 19:52:20 +10:00