A cleanup of the PM code left an incorrect #ifdef in place, leading
to a harmless build warning:
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2502:12: error: 'fm10k_suspend' defined but not used [-Werror=unused-function]
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2475:12: error: 'fm10k_resume' defined but not used [-Werror=unused-function]
It's easier to use __maybe_unused attributes here, since you
can't pick the wrong one.
Fixes: 8249c47c6b ("fm10k: use generic PM hooks instead of legacy PCIe power hooks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In bringing back the context checks, the code checks first if its normal
(non-interrupt) context, and then for NMI then IRQ then softirq. The final
check is redundant. Since the if branch is only hit if the context is one of
NMI, IRQ, or SOFTIRQ, if it's not NMI or IRQ there's no reason to check if
it is SOFTIRQ. The current code returns the same result even if its not a
SOFTIRQ. Which is confusing.
pc & SOFTIRQ_OFFSET ? 2 : RB_CTX_SOFTIRQ
Is redundant as RB_CTX_SOFTIRQ *is* 2!
Fixes: a0e3a18f4b ("ring-buffer: Bring back context level recursive checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix two places where the structure isn't initialized to zero,
and thus can't be filled properly by the driver.
Fixes: 4a4b816950 ("cfg80211: Accept multiple RSSI thresholds for CQM")
Fixes: 9930380f0b ("cfg80211: implement IWRATE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move up the extack reset/initialization in netlink_rcv_skb, so that
those 'goto ack' will not skip it. Otherwise, later on netlink_ack
may use the uninitialized extack and cause kernel crash.
Fixes: cbbdf8433a ("netlink: extack needs to be reset each time through loop")
Reported-by: syzbot+03bee3680a37466775e7@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull two NVMe fixes from Jens Axboe:
"Two important fixes for the sgl support for nvme that is new in this
release"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme-pci: take sglist coalescing in dma_map_sg into account
nvme-pci: check segement valid for SGL use
MMIO GPIO driver.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaYFB3AAoJEEEQszewGV1z+5EP/in6wDsqTAOnjim6VZs2o72G
XcHbVaDpWvBBW3WWVnL6A5HcHBuP5D3YEzfSTnVBM+ClHK82DsgnwT/FlIJ1VdOo
36jQaPtdKZ5CkpQ8zG/84T8BI7wYD15PxvXGNZLQmt0b38tPVDamf+YRqfmmyd2z
ilwy/xmj6zKikdc3SJUN+SBquZ2Vsceh574SWOnP36A7PSNQpirCJ4aR+iH0PxPn
T6c50LbuvnWwZh1ehdnSh3K7zOBPUTFkVodpiX7jHu1Ahqe55Ld/71ywWBjF76wH
rkLWGmYb5PKcGd8rtZslS+YqXstdWMAmYSFU7zRQ4ozlC07l46hd4srhl3oaElG2
fV3w3jyBNAad5Vl0ateKQhwRbbMvkfrXwmDoxU0hpoI8CdZ6COvIP9mFNcPHB1ao
lJR6S0+sVhMELfrtnyD46HMt1cx5ija63W8d/yQA8bWF5NZS+jXPdGXKmddr9OPl
1RWOALBd5XmIuzNMg7ojtcKCFJxmIb3rV5s3IOR2okhoOj8+E2YddX0tdiXAX2he
54iQiYOco0TidDpLjHxzOqF/hBt9Z3M7rZsOsKi/qcfY0BmCQoE3i6aNjaVlzLJR
6+wcrBN4g5xtrEsV+jr/U2Tw6GCfM0s0vwsSFMfpbvzjxY4wKbe2si8f8r8UIvrU
ln7PLQOYCCh7cvicpXn2
=7onn
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"This is the (hopefully) last GPIO fix for v4.15, fixing the bit
fiddling in the MMIO GPIO driver.
Again the especially endowed screwer-upper who has been open coding
bit fiddling is yours truly"
* tag 'gpio-v4.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mmio: Also read bits that are zero
When tcm->tcm_ifindex == TCM_IFINDEX_MAGIC_BLOCK, parent is still passed
down but the value is never used. Compiler does not recognize it and
issues a warning. Silence it down initializing parent to 0.
Fixes: 7960d1daf2 ("net: sched: use block index as a handle instead of qdisc when block is shared")
Reported-by: David Miller <davem@davemloft.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-01-18
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a divide by zero due to wrong if (src_reg == 0) check in
64-bit mode. Properly handle this in interpreter and mask it
also generically in verifier to guard against similar checks
in JITs, from Eric and Alexei.
2) Fix a bug in arm64 JIT when tail calls are involved and progs
have different stack sizes, from Daniel.
3) Reject stores into BPF context that are not expected BPF_STX |
BPF_MEM variant, from Daniel.
4) Mark dst reg as unknown on {s,u}bounds adjustments when the
src reg has derived bounds from dead branches, from Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the fact that A-MSDU deaggregation is done in software,
we set this flag to support the A-MSDU in A-MPDU
Signed-off-by: Steven Ting <steventing@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
wil6210 maintainer email and mail list has changed, hence update
its MAINTAINERS entry accordingly.
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
If an invalid CANFD frame is received, from a driver or from a tun
interface, a Kernel warning is generated.
This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a
kernel, bootet with panic_on_warn, does not panic. A printk seems to be
more appropriate here.
Reported-by: syzbot+e3b775f40babeff6e68b@syzkaller.appspotmail.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If an invalid CAN frame is received, from a driver or from a tun
interface, a Kernel warning is generated.
This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a
kernel, bootet with panic_on_warn, does not panic. A printk seems to be
more appropriate here.
Reported-by: syzbot+4386709c0c1284dca827@syzkaller.appspotmail.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Final 4.15 drm-misc pull:
Just 3 sun4i patches to fix clock computation/checks.
* tag 'drm-misc-fixes-2018-01-17' of git://anongit.freedesktop.org/drm/drm-misc:
drm/sun4i: hdmi: Add missing rate halving check in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Fix incorrect assignment in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Check for unset best_parent in sun4i_tmds_determine_rate
Last minute fixes for vmwgfx.
One fix for a drm helper warning introduced in 4.15
One important fix for a longer standing memory corruption issue on older
hardware versions.
* 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: fix memory corruption with legacy/sou connectors
drm/vmwgfx: Fix a boot time warning
Currently, for bpf_trace_printk helper, fake ip address 0x1
is used with comments saying that fake ip will not be printed.
This is indeed true for 4.12 and earlier version, but for
4.13 and later version, the ip address will be printed if
it cannot be resolved with kallsym. Running samples/bpf/tracex5
program and you will have the following in the debugfs
trace_pipe output:
...
<...>-1819 [003] .... 443.497877: 0x00000001: mmap
<...>-1819 [003] .... 443.498289: 0x00000001: syscall=102 (one of get/set uid/pid/gid)
...
The kernel commit changed this behavior is:
commit feaf1283d1
Author: Steven Rostedt (VMware) <rostedt@goodmis.org>
Date: Thu Jun 22 17:04:55 2017 -0400
tracing: Show address when function names are not found
...
This patch changed the comment and also altered the fake ip
address to 0x0 as users may think 0x1 has some special meaning
while it doesn't. The new output:
...
<...>-1799 [002] .... 25.953576: 0: mmap
<...>-1799 [002] .... 25.953865: 0: read(fd=0, buf=00000000053936b5, size=512)
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Improve the 'unknown reason' comment, with an actual explaination of why
the ctx pkt-data pointers need to be loaded after the helper function
bpf_xdp_adjust_meta(). Based on the explaination Daniel gave.
Fixes: 36e04a2d78 ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jakub Kicinski says:
====================
Jiong says:
Currently bpftool could disassemble host jited image, for example x86_64,
using libbfd. However it couldn't disassemble offload jited image.
There are two reasons:
1. bpf_obj_get_info_by_fd/struct bpf_prog_info couldn't get the address
of jited image and image's length.
2. Even after issue 1 resolved, bpftool couldn't figure out what is the
offload arch from bpf_prog_info, therefore can't drive libbfd
disassembler correctly.
This patch set resolve issue 1 by introducing two new fields "jited_len"
and "jited_image" in bpf_dev_offload. These two fields serve as the generic
interface to communicate the jited image address and length for all offload
targets to higher level caller. For example, bpf_obj_get_info_by_fd could
use them to fill the userspace visible fields jited_prog_len and
jited_prog_insns.
This patch set resolve issue 2 by getting bfd backend name through
"ifindex", i.e network interface index.
v1:
- Deduct bfd arch name through ifindex, i.e network interface index.
First, map ifindex to devname through ifindex_to_name_ns, then get
pci id through /sys/class/dev/DEVNAME/device/vendor. (Daniel, Alexei)
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The current architecture detection method in bpftool is designed for host
case.
For offload case, we can't use the architecture of "bpftool" itself.
Instead, we could call the existing "ifindex_to_name_ns" to get DEVNAME,
then read pci id from /sys/class/dev/DEVNAME/device/vendor, finally we map
vendor id to bfd arch name which will finally be used to select bfd backend
for the disassembler.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch set those new jit info fields introduced in this patch set.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For host JIT, there are "jited_len"/"bpf_func" fields in struct bpf_prog
used by all host JIT targets to get jited image and it's length. While for
offload, targets are likely to have different offload mechanisms that these
info are kept in device private data fields.
Therefore, BPF_OBJ_GET_INFO_BY_FD syscall needs an unified way to get JIT
length and contents info for offload targets.
One way is to introduce new callback to parse device private data then fill
those fields in bpf_prog_info. This might be a little heavy, the other way
is to add generic fields which will be initialized by all offload targets.
This patch follow the second approach to introduce two new fields in
struct bpf_dev_offload and teach bpf_prog_get_info_by_fd about them to fill
correct jited_prog_len and jited_prog_insns in bpf_prog_info.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
syzkaller generated a BPF proglet and triggered a warning with
the following:
0: (b7) r0 = 0
1: (d5) if r0 s<= 0x0 goto pc+0
R0=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0
2: (1f) r0 -= r1
R0=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0
verifier internal error: known but bad sbounds
What happens is that in the first insn, r0's min/max value
are both 0 due to the immediate assignment, later in the jsle
test the bounds are updated for the min value in the false
path, meaning, they yield smin_val = 1, smax_val = 0, and when
ctx pointer is subtracted from r0, verifier bails out with the
internal error and throwing a WARN since smin_val != smax_val
for the known constant.
For min_val > max_val scenario it means that reg_set_min_max()
and reg_set_min_max_inv() (which both refine existing bounds)
demonstrated that such branch cannot be taken at runtime.
In above scenario for the case where it will be taken, the
existing [0, 0] bounds are kept intact. Meaning, the rejection
is not due to a verifier internal error, and therefore the
WARN() is not necessary either.
We could just reject such cases in adjust_{ptr,scalar}_min_max_vals()
when either known scalars have smin_val != smax_val or
umin_val != umax_val or any scalar reg with bounds
smin_val > smax_val or umin_val > umax_val. However, there
may be a small risk of breakage of buggy programs, so handle
this more gracefully and in adjust_{ptr,scalar}_min_max_vals()
just taint the dst reg as unknown scalar when we see ops with
such kind of src reg.
Reported-by: syzbot+6d362cadd45dc0a12ba4@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Running the following sequence is currently broken:
# tc qdisc add dev foo clsact
# tc filter replace dev foo ingress prio 1 handle 1 bpf da obj bar.o
# tc filter replace dev foo ingress prio 1 handle 1 bpf da obj bar.o
RTNETLINK answers: Invalid argument
The normal expectation on kernel side is that the second command
succeeds replacing the existing program. However, what happens is
in cls_bpf_change(), we bail out with err in the second run in
cls_bpf_offload(). The EINVAL comes directly in cls_bpf_offload()
when comparing prog vs oldprog's gen_flags. In case of above
replace the new prog's gen_flags are 0, but the old ones are 8,
which means TCA_CLS_FLAGS_NOT_IN_HW is set (e.g. drivers not having
cls_bpf offload).
Fix 102740bd94 ("cls_bpf: fix offload assumptions after callback
conversion") in the following way: gen_flags from user space passed
down via netlink cannot include status flags like TCA_CLS_FLAGS_IN_HW
or TCA_CLS_FLAGS_NOT_IN_HW as opposed to oldprog that we previously
loaded. Therefore, it doesn't make any sense to include them in the
gen_flags comparison with the new prog before we even attempt to
offload. Thus, lets fix this before 4.15 goes out.
Fixes: 102740bd94 ("cls_bpf: fix offload assumptions after callback conversion")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the receive queue for 4096 bytes fragments, the page address
set in the SW data0 field of the descriptor is not the one we got
when doing the reassembly in receive. The page structure was retrieved
from the wrong descriptor into SW data0 which is then causing a
page fault when UDP checksum is accessing data above 1500.
Signed-off-by: Rex Chang <rchang@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code copies directly from userspace to ctx->crypto_send, but
doesn't always reinitialize it to 0 on failure. This causes any
subsequent attempt to use this setsockopt to fail because of the
TLS_CRYPTO_INFO_READY check, eventhough crypto_info is not actually
ready.
This should result in a correctly set up socket after the 3rd call, but
currently it does not:
size_t s = sizeof(struct tls12_crypto_info_aes_gcm_128);
struct tls12_crypto_info_aes_gcm_128 crypto_good = {
.info.version = TLS_1_2_VERSION,
.info.cipher_type = TLS_CIPHER_AES_GCM_128,
};
struct tls12_crypto_info_aes_gcm_128 crypto_bad_type = crypto_good;
crypto_bad_type.info.cipher_type = 42;
setsockopt(sock, SOL_TLS, TLS_TX, &crypto_bad_type, s);
setsockopt(sock, SOL_TLS, TLS_TX, &crypto_good, s - 1);
setsockopt(sock, SOL_TLS, TLS_TX, &crypto_good, s);
Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
do_tls_setsockopt_tx returns 0 without doing anything when crypto_info
is already set. Silent failure is confusing for users.
Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
During setsockopt(SOL_TCP, TLS_TX), if initialization of the software
context fails in tls_set_sw_offload(), we leak sw_ctx. We also don't
reassign ctx->priv_ctx to NULL, so we can't even do another attempt to
set it up on the same socket, as it will fail with -EEXIST.
Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE4bay/IylYqM/npjQHv7KIOw4HPYFAlpeDfMTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAe/sog7Dgc9ucfCACy1QfHf8WVpcdGzD4cpgIUXc4tp22E
n+sCE9/f2bnaz3V3/d3gNatPMiCcBs7oCAsj5yJGkDfG+TQo7oPsa0iacdkEN20J
p/OlxNeYUMAfUCzw73zC3WSsc8hiKGBxX6SzQNhLBpLOO8RFylHV98EnP1ugBEAV
qxr3bN0EVW/syvFGsXv9szdtslM2LocdayjWeAw2gizo8L5tNoLOAWDpwAkOI0bw
5J1BMOdehi3c6APDNttbjXRUbwlGNZMDBXj1fSs/7K9ngFOTfB1w1qpItI7yv5dM
wwnjH5rooKlaXkMkZkPL8wrD778NW99WUuXMspJYgNuhAECVRixqzNMb
=m1Js
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-4.15-20180116' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2018-01-16
this is a pull reqeust of a single patch for net/master:
This patch by Stephane Grosjean fixes a potential bug in the packet
fragmentation in the peak USB driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEE4bay/IylYqM/npjQHv7KIOw4HPYFAlpeCCQTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAe/sog7Dgc9ti9B/4jAoCYTuYXnkRvS34jdgQQV99QyC8M
EpcAgzHo2kYNPDf5q8TEVheXxvA9XeGiA+TtjL9cNowxwMMtJev3/dmBtOmU6jek
RgOsYlR8guxBHOx8pj1IMl1xPoWTLfg4Kv1qnpXx3zvhOP610G/edBBSZt659MGF
SW6pBoNivbl+EYSM5x81QIfqJ4NlD5AKY4PeeSnGrnSthd8EFNp2zKkcY8nMOJ0D
Gm2YyxGJXh+lHse965DQRNg+owZxIWyheQplulVrw9v34LOjbFko3Cd+D9KLW5MG
LVVRJ3E0jm7W75AvxNcv2WP+lZVcDxXqsxFH0dP8WOJNZiKZeJ5aZfji
=ROXk
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-4.16-20180116' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2018-01-16
this is a pull request for net-next/master consisting of 9 patches.
This is a series of patches, some of them initially by Franklin S Cooper
Jr, which was picked up by Faiz Abbas. Faiz Abbas added some patches
while working on this series, I contributed one as well.
The first two patches add support to CAN device infrastructure to limit
the bitrate of a CAN adapter if the used CAN-transceiver has a certain
maximum bitrate.
The remaining patches improve the m_can driver. They add support for
bitrate limiting to the driver, clean up the driver and add support for
runtime PM.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The trailing semicolon is an empty statement that does no operation.
It is completely stripped out by the compiler. Removing it since it doesn't do
anything.
Fixes: 5f35227ea3 ("net: Generalize ndo_gso_check to ndo_features_check")
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some iommu implementations can merge physically and/or virtually
contiguous segments inside sg_map_dma. The NVMe SGL support does not take
this into account and will warn because of falling off a loop. Pass the
number of mapped segments to nvme_pci_setup_sgls so that the SGL setup
can take the number of mapped segments into account.
Reported-by: Fangjian (Turing) <f.fangjian@huawei.com>
Fixes: a7a7cbe3 ("nvme-pci: add SGL support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@rimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver needs to verify there is a payload with a command before
seeing if it should use SGLs to map it.
Fixes: 955b1b5a00 ("nvme-pci: move use_sgl initialization to nvme_init_iod()")
Reported-by: Paul Menzel <pmenzel+linux-nvme@molgen.mpg.de>
Reviewed-by: Paul Menzel <pmenzel+linux-nvme@molgen.mpg.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling accept on a TCP socket with a TLS ulp attached results
in two sockets that share the same ulp context.
The ulp context is freed while a socket is destroyed, so
after one of the sockets is released, the second second will
trigger a use after free when it tries to access the ulp context
attached to it.
We restrict the TLS ulp to sockets in ESTABLISHED state
to prevent the scenario above.
Fixes: 3c4d755915 ("tls: kernel TLS support")
Reported-by: syzbot+904e7cd6c5c741609228@syzkaller.appspotmail.com
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
restructure the code which adds support for configuring
PCIe VF via mgmt netdevice. which was added by
commit 7829451c69 ("cxgb4: Add control net_device for
configuring PCIe VF")
Original work by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idr_find() is safe under rcu_read_lock() and
maybe_get_net() guarantees that net is alive.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
peernet2id_alloc() is racy without rtnl_lock() as refcount_read(&peer->count)
under net->nsid_lock does not guarantee, peer is alive:
rcu_read_lock()
peernet2id_alloc() ..
spin_lock_bh(&net->nsid_lock) ..
refcount_read(&peer->count) (!= 0) ..
.. put_net()
.. cleanup_net()
.. for_each_net(tmp)
.. spin_lock_bh(&tmp->nsid_lock)
.. __peernet2id(tmp, net) == -1
.. ..
.. ..
__peernet2id_alloc(alloc == true) ..
.. ..
rcu_read_unlock() ..
.. synchronize_rcu()
.. kmem_cache_free(net)
After the above situation, net::netns_id contains id pointing to freed memory,
and any other dereferencing by the id will operate with this freed memory.
Currently, peernet2id_alloc() is used under rtnl_lock() everywhere except
ovs_vport_cmd_fill_info(), and this race can't occur. But peernet2id_alloc()
is generic interface, and better we fix it before someone really starts
use it in wrong context.
v2: Don't place refcount_read(&net->count) under net->nsid_lock
as suggested by Eric W. Biederman <ebiederm@xmission.com>
v3: Rebase on top of net-next
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
r8153 on Dell TB15/16 dock corrupts rx packets.
This change is suggested by Realtek. They guess that the XHCI controller
doesn't have enough buffer, and their guesswork is correct, once the RX
aggregation gets disabled, the issue is gone.
ASMedia is currently working on a real sulotion for this issue.
Dell and ODM confirm the bcdDevice and iSerialNumber is unique for TB16.
Note that TB15 has different bcdDevice and iSerialNumber, which are not
unique values. If you still have TB15, please contact Dell to replace it
with TB16.
BugLink: https://bugs.launchpad.net/bugs/1729674
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang says:
====================
tun: allow to attach eBPF filter
This series tries to implement eBPF socket filter for tun. This could
be used for implementing efficient virtio-net receive filter for
vhost-net.
Changes from V2:
- fix typo
- remove unnecessary double check
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows userspace to attach eBPF filter to tun. This will
allow to implement VM dataplane filtering in a more efficient way
compared to cBPF filter by allowing either qemu or libvirt to
attach eBPF filter to tun.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To be reused by other eBPF program other than queue selection.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- A rather involved set of memory hardware encryption fixes to
support the early loading of microcode files via the initrd. These
are larger than what we normally take at such a late -rc stage, but
there are two mitigating factors: 1) much of the changes are
limited to the SME code itself 2) being able to early load
microcode has increased importance in the post-Meltdown/Spectre
era.
- An IRQ vector allocator fix
- An Intel RDT driver use-after-free fix
- An APIC driver bug fix/revert to make certain older systems boot
again
- A pkeys ABI fix
- TSC calibration fixes
- A kdump fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/vector: Fix off by one in error path
x86/intel_rdt/cqm: Prevent use after free
x86/mm: Encrypt the initrd earlier for BSP microcode update
x86/mm: Prepare sme_encrypt_kernel() for PAGE aligned encryption
x86/mm: Centralize PMD flags in sme_encrypt_kernel()
x86/mm: Use a struct to reduce parameters for SME PGD mapping
x86/mm: Clean up register saving in the __enc_copy() assembly code
x86/idt: Mark IDT tables __initconst
Revert "x86/apic: Remove init_bsp_APIC()"
x86/mm/pkeys: Fix fill_sig_info_pkey
x86/tsc: Print tsc_khz, when it differs from cpu_khz
x86/tsc: Fix erroneous TSC rate on Skylake Xeon
x86/tsc: Future-proof native_calibrate_tsc()
kdump: Write the correct address of mem_section into vmcoreinfo
Pull scheduler fix from Ingo Molnar:
"A delayacct statistics correctness fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
delayacct: Account blkio completion on the correct task
Pull x86 perf fix from Ingo Molnar:
"An Intel RAPL events fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Fix Haswell and Broadwell server RAPL event
tfile->tun could be detached before we close the tun fd,
via tun_detach_all(), so it should not be used to check for
tfile->tx_array.
As Jason suggested, we probably have to clean it up
unconditionally both in __tun_deatch() and tun_detach_all(),
but this requires to check if it is initialized or not.
Currently skb_array_cleanup() doesn't have such a check,
so I check it in the caller and introduce a helper function,
it is a bit ugly but we can always improve it in net-next.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 1576d98605 ("tun: switch to use skb array for tx")
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 pti bits and fixes from Thomas Gleixner:
"This last update contains:
- An objtool fix to prevent a segfault with the gold linker by
changing the invocation order. That's not just for gold, it's a
general robustness improvement.
- An improved error message for objtool which spares tearing hairs.
- Make KASAN fail loudly if there is not enough memory instead of
oopsing at some random place later
- RSB fill on context switch to prevent RSB underflow and speculation
through other units.
- Make the retpoline/RSB functionality work reliably for both Intel
and AMD
- Add retpoline to the module version magic so mismatch can be
detected
- A small (non-fix) update for cpufeatures which prevents cpu feature
clashing for the upcoming extra mitigation bits to ease
backporting"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
module: Add retpoline tag to VERMAGIC
x86/cpufeature: Move processor tracing out of scattered features
objtool: Improve error message for bad file argument
objtool: Fix seg fault with gold linker
x86/retpoline: Add LFENCE to the retpoline/RSB filling RSB macros
x86/retpoline: Fill RSB on context switch for affected CPUs
x86/kasan: Panic if there is not enough memory to boot
Jiri Pirko says:
====================
net: sched: allow qdiscs to share filter block instances
Currently the filters added to qdiscs are independent. So for example if you
have 2 netdevices and you create ingress qdisc on both and you want to add
identical filter rules both, you need to add them twice. This patchset
makes this easier and mainly saves resources allowing to share all filters
within a qdisc - I call it a "filter block". Also this helps to save
resources when we do offload to hw for example to expensive TCAM.
So back to the example. First, we create 2 qdiscs. Both will share
block number 22. "22" is just an identification:
$ tc qdisc add dev ens7 ingress_block 22 ingress
^^^^^^^^^^^^^^^^
$ tc qdisc add dev ens8 ingress_block 22 ingress
^^^^^^^^^^^^^^^^
If we don't specify "block" command line option, no shared block would
be created:
$ tc qdisc add dev ens9 ingress
Now if we list the qdiscs, we will see the block index in the output:
$ tc qdisc
qdisc ingress ffff: dev ens7 parent ffff:fff1 ingress_block 22
qdisc ingress ffff: dev ens8 parent ffff:fff1 ingress_block 22
qdisc ingress ffff: dev ens9 parent ffff:fff1
To make is more visual, the situation looks like this:
ens7 ingress qdisc ens7 ingress qdisc
| |
| |
+----------> block 22 <----------+
Unlimited number of qdiscs may share the same block.
Note that this patchset introduces block sharing support also for clsact
qdisc:
$ tc qdisc add dev ens10 ingress_block 23 egress_block 24 clsact
$ tc qdisc show dev ens10
qdisc clsact ffff: dev ens10 parent ffff:fff1 ingress_block 23 egress_block 24
We can add filter using the block index:
$ tc filter add block 22 protocol ip pref 25 flower dst_ip 192.168.0.0/16 action drop
Note we cannot use the qdisc for filter manipulations of shared blocks:
$ tc filter add dev ens8 ingress protocol ip pref 1 flower dst_ip 192.168.100.2 action drop
Error: This filter block is shared. Please use the block index to manipulate the filters.
We will see the same output if we list filters for ingress qdisc of
ens7 and ens8, also for the block 22:
$ tc filter show block 22
filter block 22 protocol ip pref 25 flower chain 0
filter block 22 protocol ip pref 25 flower chain 0 handle 0x1
...
$ tc filter show dev ens7 ingress
filter block 22 protocol ip pref 25 flower chain 0
filter block 22 protocol ip pref 25 flower chain 0 handle 0x1
...
$ tc filter show dev ens8 ingress
filter block 22 protocol ip pref 25 flower chain 0
filter block 22 protocol ip pref 25 flower chain 0 handle 0x1
...
---
v10->v11:
- patch 2:
- fixed error path when register_pernet_subsys fails pointed out by Cong
- patch 9:
- rebased on top of the current net-next
v9->v10:
- patch 7:
- fixed ifindex magic in the patch description
- userspace patches:
- added manpages and patch descriptions
v8->v9:
- patch "net: sched: add rt netlink message type for block get" was
removed, userspace check filter existence using qdisc dump
v7->v8:
- patch 7:
- added comment to ifindex block magic
- patch 9:
- new patch
- patch 10:
- base this on the patch that introduces qdisc-generic block index
attributes parsing/dumping
- patch 13:
- rebased on top of current net-next
v6->v7:
- patch 1:
- unsquashed shared block patch that was previously squashed by mistake
- fixed error path in block create - freeing chain 0
- patch 2:
- new patch - splitted from the previous one as it got accidentaly
squashed in the rebasing process in the past
- converted to idr extended
- removed auto-generating of block indexes. Callers have to explicily
tell that the block is shared by passing non-zero block index
- fixed error path in block get ext - freeing chain 0
- patch 7:
- changed extack message for block index handle as suggested by DaveA
- added extack message when block index does not exist
- the block ifindex magic is in define and change to 0xffffffff
as suggested by Jamal
- patch 8:
- new patch implementing RTM_GETBLOCK in order to query if the block
with some index exists
- patch 9:
- adjust to the core changes and check block index attributes for being 0
v5->v6:
- added patch 6 that introduces block handle
v4->v5:
- patch 5:
- add tracking of binding of devs that are unable to offload and check
that before block cbs call.
v3->v4:
- patch 1:
- rebased on top of the current net-next
- added some extack strings
- patch 3:
- rebased on top of the current net-next
- patch 5:
- propagate netdev_ops->ndo_setup_tc error up to tcf_block_offload_bind
caller
- patch 7:
- rebased on top of the current net-next
v2->v3:
- removed original patch 1, removing tp->q cls_bpf dependency. Fixed by
Jakub in the meantime.
- patch 1:
- rebased on top of the current net-next
- patch 5:
- new patch
- patch 8:
- removed "p_" prefix from block index function args
- patch 10:
- add tc offload feature handling
====================
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>