Commit Graph

22 Commits

Author SHA1 Message Date
Krzysztof Kozlowski 45b6ff3981 ARM: ixp4xx_defconfig: Cleanup from non-existing options
Remove options which do not exist anymore:
 - ECONET is gone since commit 349f29d841 ("econet: remove ancient bug
   ridden protocol");

 - IPDDP_DECAP is gone since commit 9b5645b513 ("appletalk: remove
   "config IPDDP_DECAP"");

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-07-18 17:51:32 +02:00
Krzysztof Kozlowski bd5f62605f ARM: defconfig: Cleanup from old Kconfig options
Remove old, dead Kconfig options (in order appearing in this commit):
 - EXPERIMENTAL is gone since v3.9;
 - INET_LRO: commit 7bbf3cae65 ("ipv4: Remove inet_lro library");
 - MTD_CONCAT: commit f53fdebcc3 ("mtd: drop MTD_CONCAT from Kconfig entirely");
 - MTD_PARTITIONS: commit 6a8a98b22b ("mtd: kill CONFIG_MTD_PARTITIONS");
 - MTD_CHAR: commit 660685d9d1 ("mtd: merge mtdchar module with mtdcore");
 - NETDEV_1000 and NETDEV_10000: commit f860b0522f ("drivers/net:
   Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with
   just ETHERNET but that is separate change;
 - INOTIFY: commit 2dfc1cae4c ("inotify: remove inotify in kernel interface");
 - MISC_DEVICES: commit 7c5763b845 ("drivers: misc: Remove
   MISC_DEVICES config option");
 - HID_SUPPORT: commit 1f41a6a994 ("HID: Fix the generic Kconfig options");
 - BT_L2CAP and BT_SCO: commit f1e91e1640 ("Bluetooth: Always compile
   SCO and L2CAP in Bluetooth Core");
 - DEBUG_ERRORS: commit b025a3f836 ("ARM: 6876/1: Kconfig.debug:
   Remove unused CONFIG_DEBUG_ERRORS");
 - USB_DEVICE_CLASS: commit 007bab9132 ("USB: remove CONFIG_USB_DEVICE_CLASS");
 - RCU_CPU_STALL_DETECTOR: commit a00e0d714f ("rcu: Remove conditional
   compilation for RCU CPU stall warnings");
 - SYSCTL_SYSCALL_CHECK: commit 7c60c48f58 ("sysctl: Improve the
   sysctl sanity checks");
 - IP_NF_QUEUE: commit 3dd6664fac ("netfilter: remove unused "config IP_NF_QUEUE"");
 - IP_NF_TARGET_ULOG: commit d4da843e6f ("netfilter: kill remnants of ulog targets");
 - IP6_NF_QUEUE: commit d16cf20e2f ("netfilter: remove ip_queue support");
 - IP6_NF_TARGET_LOG: commit 6939c33a75 ("netfilter: merge ipt_LOG and
   ip6_LOG into xt_LOG");
 - USB_LED: commit a335aaf312 ("usb: misc: remove outdated USB LED driver");
 - MMC_UNSAFE_RESUME: commit 2501c9179d ("mmc: core: Use
   MMC_UNSAFE_RESUME as default behavior");
 - AUTOFS_FS: commit 561c5cf923 ("staging: Remove autofs3");
 - DISPLAY_SUPPORT: commit 5a6b5e02d6 ("fbdev: remove display subsystem");
 - CFG80211_REG_DEBUG: commit c799ba6eab ("cfg80211: remove
   CFG80211_REG_DEBUG");
 - VIDEO_OUTPUT_CONTROL: commit f167a64e9d ("video / output: Drop
   display output class support");
 - USB_LIBUSUAL: commit f61870ee6f ("usb: remove libusual");
 - CRYPTO_ZLIB: commit 110492183c ("crypto: compress - remove unused
   pcomp interface");
 - BLK_DEV_UB: commit 68a5059ecf ("block: remove the deprecated ub driver");

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
[for vexpress]
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-06-10 19:28:57 +02:00
Bartlomiej Zolnierkiewicz 150a55a46d arm: ixp4xx_defconfig: convert to use libata PATA drivers
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts ixp4xx_defconfig to use libata PATA
drivers.

Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khalasa@piap.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2016-10-26 18:43:32 +02:00
Stephan Linz e580822775 arm: use the new LED disk activity trigger
- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'

Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-27 08:58:40 +02:00
Daniel Thompson 34c64a5d83 ARM: 8268/1: configs: Enable DEBUG_LL_UART_8250 where needed
All defconfigs touched by this patch already enable DEBUG_LL and by
default DEBUG_LL_UART_NONE will be selected. This causes no issues
today because due to some back compatibility magic we eventually need
to remove it is not actually honoured. Nevertheless DEBUG_LL_UART_8250
is the right value for these platforms and should be set in the config
files.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21 15:49:36 +00:00
Naoki MATSUMOTO 3a0d89d3f8 USB: delete CONFIG_USB_DEVICEFS from defconfig
It no longer occurs in Kconfig.
USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig.

Signed-off-by: Naoki MATSUMOTO <nekomatu+linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 16:07:13 -07:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Uwe Kleine-König 07a8c03f3e ARM: reduce defconfigs
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 07:12:18 +02:00
Russell King 4da8b8208e ARM: Kill CONFIG_CPU_32
26-bit ARM support was removed a long time ago, and this symbol has
been defined to be 'y' ever since.  As it's never disabled anymore,
we can kill it without any side effects.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18 16:07:53 +00:00
Jean Delvare dd7f8dbe2b eeprom: More consistent symbol names
Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26 21:19:57 +01:00
Rod Whitby 7e36e2f535 [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board
The Freecom-FSG3 is a small network-attached-storage device with the
following feature set:

* Intel IXP422
* 4MB Flash (ixp4xx flash driver)
* 64MB RAM
* 4 USB 2.0 host ports (ehci and ohci drivers)
* 1 WAN (eth1) and 3 LAN (eth0) ethernet ports
  * Supported by the open source ixp4xx ethernet driver
* Via VT6421 disk controller (libata and sata-via drivers)
  * Internal hard disk (PATA supported, SATA not yet supported)
  * External SATA port (not yet supported)
* ISL1208 RTC chip
* Winbond 83782 temp sensor and fan controller
* MiniPCI slot

The ixp4xx_defconfig is also updated to support this device (the
leds-fsg driver is to be submitted separately via the leds tree after
this initial support is merged, as it depends on header gpio defines).

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 10:03:59 +01:00
Rod Whitby b7edc84a96 [ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards
Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig.

Sets up the corresponding platform data for the nslu2 and nas100d
boards, and reads the ethernet MAC address from the internal flash.

Tested on both little-endian and big-endian kernels.

Tested-by: Tom King <tom@websb.net>

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Michael Westerhof <mwester@dls.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:15:26 +00:00
Rod Whitby 1208ebf25b [ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver
These are the only three boards to use the IXP4XX-GPIO-LED driver, and
they can all use the new leds-gpio driver instead with no change in
functionality.

--

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:15:26 +00:00
Rod Whitby 95053aec4d [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards
This updates the defconfig for the ixp4xx machine in arch/arm/config
taking all the defaults, with the following additions:

1) Enable support for the nslu2, loft, gateway7001, wg302v2,
   dsmg600, and gtwx5715 boards.
2) Enable EABI, OABI, HOTPLUG and FW_LOADER.
3) Enable the RTC subsystem, with drivers for the RTC chips on the
   nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards.
4) Enable the LEDS subsystem to support the nslu2, nas100d and
   dsmg600 boards.  Enable the ixp4xx beeper driver.
5) Enable the USB subsystem, USB host driver support and USB mass
   storage support (required for boot disk on nslu2 board).
6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600
   (pata_artop) and avila (ixp4xx_cf) boards.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:15:23 +00:00
Ruslan V. Sushko 45fba0846f [ARM] 4311/1: ixp4xx: add KIXRP435 platform
Add Intel KIXRP435 Reference Platform based on IXP43x processor.
Fixed after review : access to cp15 removed in identification functions,
used access to global processor_id instead

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: Ruslan  Sushko <rsushko@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 20:51:55 +01:00
Russell King eb8b0afc3a [ARM] Remove DEBUG_WAITQ
DEBUG_WAITQ appears to have been removed by others, but no one
removed the configuration option from ARM.  Remote it from both
Kconfig.debug and all default configurations.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 12:24:47 +00:00
Russell King 6751718932 [ARM] Remove PM_LEGACY=y from selected ARM defconfigs
Most ARM defconfigs don't actually need to have PM_LEGACY enabled.
Disable it for ATEB9200, Collie, IXP4xx, OMAP H2, S3C2410 and
Versatile.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-11 22:54:07 +00:00
Russell King 63dcf0ad2a [ARM] Remove CONFIG_ARCH_CAMELOT from defconfigs
EPXA10DB has gone, no need to keep the symbol in the defconfigs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 13:32:56 +00:00
Deepak Saxena b1ad3a57d3 [ARM] 3221/1: Update IXP4xx defconfig
Patch from Deepak Saxena

Add NAS 100d to machine build list and update to new 2.6.15 options.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>

---
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:14 +00:00
Deepak Saxena 73ee723e4c [ARM] 3081/1: Remove GTWX5715 from ixp4xx_defconfig
Patch from Deepak Saxena

CONFIG_MACH_GTWX5715 hardcodes the machine type in head-xscale.S so we
can no longer boot on any other machine types. The proper fix would be
to remove the hardcoding, but that machine is an off-the-shelf system
and most users won't have access to the bootloader. :(

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-01 22:32:12 +00:00
Vincent Sanders 819ccc86a4 [ARM] 2936/1: ixp4xx default config fixes
Patch from Vincent Sanders

A recent patch which made IXP4xx mach_desc's depend on config options
had the effect of not building the kernel for several machines it
possibly could be, this patch updates the default config to ensure all
possible machines are built for by default.

Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26 19:52:57 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00